Crocheting description

Assembly and design

Pumpkin

ice cream

THE AUTHOR:
EKATERINA DENISOVA

@MONSTRODOM 2021
 MONSTER

Hello, my dear friend!

I am glad to welcome You to the pages of my

crochet pattern.

Thank you very much for the trust you have

placed in me by purchasing this description.

On its pages you will find step-by-step

instructions for crocheting Pumpkin ice cream.

I tried to make everything as clear as possible

for You. I hope I did it.

Shall we get started?

Enjoy your crocheting! :)

@MONSTRODOM PAGE 02
 HALLOWEEN

IMPORTANT!!!

I want to remind you, that this pattern is my personal working-out.

And any distribution (publication, sale, forwarding, translation into foreign
languages) is prohibited.

You can use your final/finished product, based on this pattern and created
according it as you wish. When publishing your work, please name the
author and specify my active link - @monstrodom

Please respect the work of others. I really hope for your understanding.

This description doesn’t contain crochet lessons. Initial skills are required.

The size of the finished toy is about 9.65 inches (taking into account the
pumpkin stalk and the ice cream cone), provided that you use the yarn
specified below.

@MONSTRODOM PAGE 03
 PUMPKIN

Necessary materials: Abbreviation:

1. Yarnart Jeans yarn 50g/160m (55% cotton, 45% AR – Amigurumi Ring
polyacrylic): terracotta - No.85, brown - No.70, milk - ch – chain
No.03, black - No.53, mustard - No.84, graphite - No.28. sl st - slip stitch
2. Yarnart Jeans Crazy yarn 50g/160m (55% cotton, 45% sc – single crochet
polyacrylic): melange - No.610. hdc – half double crochet
3. Black threads 25g/150m, cotton 100%: black, milk, dc – double crochet
mustard (for the spider's eye and pumpkin decoration). BLO - back loop only
4. Beads that match the main color scheme. FLO - front loop only
5. Button - must be at least 10 mm in diameter. inc – increase
6. Crochet hook, suitable in size-2.0 mm and 0.75 mm. dec – decrease
7. Fiberfill. * - the number after * is the number of
8. Dry pastel for tinting pumpkin (brown, black), brush. times this combination to be repeated in a
9. A needle with a large eye for sewing parts, a thin given row
needle for beads, a regular sewing needle, pins, scissors. (…) – the number in brackets is the
number of loops in a given row

@MONSTRODOM PAGE 04
 MONSTER

Crocheting

description

@MONSTRODOM PAGE 05
PUMPKIN (1 part)
Chain 30 in terracotta.
Crochet the first row from the second chain from the
hook.
At the end of each row, turn the crochet and crochet in
the opposite direction.

Work in BLO (54 rounds):

1-53 - 2 sl st, 2 sc, 21 hdc, 2 sc, 2 sl st; 1 ch
54 - 2 sl st, 2 sc, 21 hdc, 2 sc, 2 sl st

Cut the yarn. Leave the long end for sewing.

⠀
Use this thread to sew our part on the side.
Fasten the thread.
⠀
Next, insert the needle with the same thread between
the rows along the edge of the part as shown in the
photo. Tighten the hole (see the photo). Fasten the
thread. This will be the bottom of the pumpkin. Now you
need to close this hole:

1 - crochet the holes 17 sc in a circle. You may get a

little more or less.

@MONSTRODOM PAGE 06
2 - Work in BLO 10 dec (you can crochet for the
front loops, it does not matter)

* it is necessary to crochet dec until there are 6-7 loops

left.

Carefully tighten the hole by the front loops using a

needle and the same thread.

Cut and hide the yarn.

Add the filler. It is not necessary to fill the part very

tightly, since the filler will look out through the
crocheted fabric.

Use a new thread to tighten the second hole. Fasten

the thread.

@MONSTRODOM PAGE 07
PUMPKIN STALK
* Add the filler only to the lower part of the pumpkin stalk.

Crochet in melange (list of required materials, item 2):

1 - 21 sc
2 - (1 sc, dec) *7 (14)
3 - 4 sc, dec, 8 sc (13)
4 - 4 sc, dec, 7 sc (12)
5 - 4 sc, dec, 6 sc (11)
6 - 4 sc, dec, 5 sc (10)
7 - 4 sc, dec, 4 sc (9)
8 - 4 sc, dec, 3 sc (8)
9 - (2 sc, dec) *2 (6)
10 - 6 sc
⠀
Carefully tighten the hole by the front loops using a needle
and the same thread. Cut the yarn. Leave the long end for
sewing.

*Remember that the seam of the pumpkin should be located at the

back.

In order for the pumpkin stalk to be fixed in a bent state, it is

necessary to lay a small basting seam on its inner side and
carefully pull it off.
Fasten the thread, cut it off and hide it.
@MONSTRODOM PAGE 08
PUMPKIN EYE (1 part)

Crochet in black:
1 - 6 sc in to magic ring
2 - 6 inc sc (12)
3 - (inc hdc, 5 sc) *2 (14)

Change the yarn to brown:

4 - (2 inc hdc, 5 sc) *2 (18)
5 - 1 sc, 2 inc hdc, 7 sc, 2 inc hdc, 6 sc (22)

Change the yarn to milky:

6 - 2 sc, 2 inc hdc, 9 sc, 2 inc hdc, 7 sc (26)
7 - 3 hdc, 2 inc hdc, 5 hdc, 1 inc hdc, 5 hdc, 2 inc hdc, 5 hdc, 1 inc hdc, 2 hdc (32)
8 - 32 sc
1 sl st

Cut the yarn. Leave the long end for sewing.

@MONSTRODOM PAGE 09
SPIRALS (2 parts)

1. Chain 24 in brown:
Crocheting of this row begins with the second loop from the hook.
Crochet 3 sc in each loop to the end of the chain.
Straighten the spiral.

2. Chain 26 in mustard:
Crocheting of this row begins with the second loop from the hook.
Crochet 3 sc in each loop to the end of the chain.
Straighten the spiral
Cut the yarn. Leave the long end for sewing.

EYELID (1 part)

Chain 26 in terracotta. Crochet the first row from the second chain from the hook.
At the end of each row, turn the crochet and crochet in the opposite direction.
Crochet in two loops.

1 - 1 sl st, 1 sc, 5 hdc, 1 inc hdc, 5 hdc, 1 sc, 1 sl st (16); 1 ch

2 - 1 inc sc, 6 hdc, 2 inc dc, 6 hdc, 1 inc sc (20); 1 ch
3 - 1 sl st, 1 sc, 16 hdc, 1 sc, 1 sl st (20); 1 ch
4 - 1 sl st, 1 sc, 7 hdc, 2 inc dc, 7 hdc, 1 sc, 1 sl st (22)

@MONSTRODOM PAGE 10
5 - Next, you do not need to turn the crochet, but continue to crochet in a circle:
1 sc - crochet on the side in the middle,
3 sc in one loop (the first loop of the 16 ch that were typed at the very beginning of crocheting),
6 sc, 1 inc, 6 sc, 3 sc in one loop,
1 sc - crochet on the side in the middle,
continue crocheting from the first loop of the 4th row - 22 sc; at the end of 1 sl st
⠀
Cut the yarn. Leave the long end for sewing.

@MONSTRODOM PAGE 11
SPIDER HEAD (1 parts)

Crochet in graphite:
1 - 6 sc in to magic ring
2 - inc repeat 6 times (12)
3 - (1 sc, inc) *6 (18)
4 - 1 sc, inc; (2 sc, inc) *5; 1 sc (24)
5-6 - 24 sc (2 rounds)
7 - (3 sc, inc) *6 (30)
8 - 30 sc

We fill the toy with fiberfill in the process of

crocheting.

9 - Work in BLO 15 dec (15)

Work in FLO:

10 - 7 dec, 1 sc (8)
11 - 1 dec (7)

Carefully tighten the hole by the front loops using a

needle and the same thread.

Cut and hide the yarn.

@MONSTRODOM PAGE 12
SPIDER BODY (1 parts)
Crochet in graphite:
1 - 6 sc in to magic ring
2 - inc repeat 6 times (12)
3 - (1 sc, inc) *6 (18)
4 - 1 sc, inc; (2 sc, inc) *5; 1 sc (24)
5 - (3 sc, inc) *6 (30)
6 - 2 sc, inc; (4 sc, inc) *5; 2 sc (36)
7-8 - 36 sc (2 rounds)
9 - (5 sc, inc) *6 (42)
10-12 - 42 sc (3 rounds)

13 - crochet spider paws:

(3 sc; into the fourth loop - Work in FLO 1 sl st, chain 24, crochet from the second
loop from the hook on the chain - 23 sl st, 1 sl st - crochet in the same fourth loop)
*4;
10 сбн;
(Work in FLO 1 sl st, chain 24, crochet from the second loop from the hook on the
chain - 23 sl st, 1 sl st - crochet in still in this loop; 3 sc) *4

14 - 42 sc crochet in two loops*

*Where the spider's legs were crocheted, crochet for the back loop. To make it
easier to find this back loop, pull the spider's leg up. You will see a hole under it. It
is under this hole that the loop you need is located.

@MONSTRODOM PAGE 13
We fill the toy with fiberfill in the process of crocheting.
15 - Work in BLO 21 dec (21)
16 - 10 dec, 1 sc (11)
17 - 5 dec, 1 sc (6)

Carefully tighten the hole by the front loops using a needle and the same thread.
Cut the yarn. Leave the long end for sewing.
@MONSTRODOM PAGE 14
SPIDER'S EYE (1 part)

This part is crocheted with thin threads (list of required materials,

item 3). I used a 0.75 mm crochet hook.

Crochet in black:
1 - 6 sc in to magic ring

Change the yarn to mustard:

2 - inc repeat 6 times (12)
3 - (1 sc, inc) *6 (18)

Change the yarn to milky:

4-5 - 18 sc (2 rounds)
1 sl st

Cut the yarn. Leave the long end for sewing.

@MONSTRODOM PAGE 15
ICE CREAM CONE (1 part)
Crochet in graphite:
1 - 6 sc in to magic ring
2 - (1 sc, inc) *3 (9)
3 - 9 sc
4 - 1 sc, inc; (2 sc, inc) *2; 1 sc (12)
5 - (3 sc, inc) *3 (15)
6-7 - 15 sc (2 rounds)
8 - 2 sc, inc; (4 sc, inc) *2; 2 sc (18)
9 - (5 sc, inc) *3 (21)
10-11 - 21 sc (2 rounds)
12 - 3 sc, inc; (6 sc, inc) *2; 3 sc (24)
13 - (7 sc, inc) *3 (27)
14-15 - 27 sc (2 rounds)
16 - 4 sc, inc; (8 sc, inc) *2; 4 sc (30)
17 - (9 sc, inc) *3 (33)
18-19 - 33 sc (2 rounds)
20 - 5 sc, inc; (10 sc, inc) *2; 5 sc (36)
21 - (11 sc, inc) *3 (39)
22-23 - 39 sc (2 rounds) *We fill the toy with fiberfill in the process of
24 - 6 sc, inc; (12 sc, inc) *2; 6 sc (42) crocheting.
25 - (13 sc, inc) *3 (45)
26-27 - 45 sc (2 rounds)
28 - 7 sc, inc; (14 sc, inc) *2; 7 sc (48)
29 - (15 sc, inc) *3 (51)
30-31 - 51 sc (2 rounds)
@MONSTRODOM PAGE 16
32 - 8 sc, inc; (16 sc, inc) *2; 8 sc (54)
33 - (17 sc, inc) *3 (57)
34-35 - 57 sc (2 rounds)
36 - 9 sc, inc; (18 sc, inc) *2; 9 sc (60)
37 - (19 sc, inc) *3 (63)
38 - 10 sc, inc; (20 sc, inc) *2; 10 sc (66)
39 - (21 sc, inc) *3 (69)
40 - 69 sc
41 - (22 sc, inc) *3 (72)
42 - Work in FLO 72 sc
1 sl st

Cut and hide the yarn.

Now we start crocheting the ice cream itself.

Crochet in terracotta:
1 - 72 sc - crochet for the back loops of the 41st row

@MONSTRODOM PAGE 17
Change the yarn to melange:
2 - (1 sc, dec) *24 (48)

Change the yarn to terracotta:

3 - (2 sc, dec) *12 (36)

Change the yarn to melange:

4 - (2 sc, dec) *9 (27)

@MONSTRODOM PAGE 18
5 - (2 sc, dec) *6; 1 sc, dec (20)

Change the yarn to terracotta:

6 - (2 sc, dec) *5 (15)
7 - (1 sc, dec) *5 (10)

Change the yarn to melange: (hide the terracotta-colored thread in

crochet):
8 - (1 sc, dec) *3; 1 sc (7)

Carefully tighten the hole by the front loops using a needle and the
same thread.

Cut and hide the yarn.

@MONSTRODOM PAGE 19
FRILLE
*See photos on pages 20-22

Insert the hook for both loops of the 42nd row, enter the mustard-colored thread.
Chain 2.

Next, crochet to the end of the row according to the scheme: 3 dc in each loop (216)
Now you need to connect the last loop to the first loop: 1 sl st
Chain 2. Crochet to the end of the row according to the scheme: 1 dc in each loop (216)
1 sl st.
Cut and hide the yarn.

@MONSTRODOM PAGE 20
@MONSTRODOM PAGE 21
@MONSTRODOM PAGE 22
 Assembly

and design

HALLOWEEN

@MONSTRODOM PAGE 23
Attach the eye to the pumpkin with pins just above the middle (see photo).
Sew it on. When a small hole remains, add the filler.

Fasten the thread and remove it to the side for now, do not cut it off.

@MONSTRODOM PAGE 24
Now attach the eyelid with pins as shown in the photo. The front side of the eyelid will look up. Make a crease in
the corners.
Sew on the eyelid. The lower part of the eyelid, which passes directly over the eye, does not need to be sewn.
On the eyelid itself, also make folds (I got two) and fix them slightly with a needle and the same thread.
Hide the thread and cut it off.

@MONSTRODOM PAGE 25
With the remaining milk thread, embroider the highlights on the eye. Cut the thread.

@MONSTRODOM PAGE 26
Then we proceed to the assembly of the spider. Sew the head to the body as shown in the photo.
Fill the spider's eye with filler. Sew on the eye. When a small hole remains, add more filler if necessary. With the
remaining thread, embroider the glare (p. 28).
With a brown thread, embroider the eyelid (p. 28).

@MONSTRODOM PAGE 27
@MONSTRODOM PAGE 28
Place the spider on the pumpkin, secure it with pins. Sew it on. Do not cut the thread yet.
Then, using pins, fix the paws as shown in the photo. Sew on the paws. (p. 29-30)

@MONSTRODOM PAGE 29
@MONSTRODOM PAGE 30
Use the pins to find the shape of the smile you need. Try on the thread. If everything suits you, then embroider the
mouth with a thin black thread (you can divide the yarn in half) as shown in the photo (p. 31-32).

@MONSTRODOM PAGE 31
@MONSTRODOM PAGE 32
With a milk thin thread, embroider the web as shown in the photo.

@MONSTRODOM PAGE 33
Embroider the web and spider with beads.
Sew the spirals.

@MONSTRODOM PAGE 34
Attach the button with a pin to the center of the bottom of the pumpkin. Sew on the button.

@MONSTRODOM PAGE 35
Perform tinting with dry pastel.

@MONSTRODOM PAGE 36
Sew the button into the very center of the ice cream.

*When you attach the pumpkin to the ice cream cone, it will not sit tightly. The pumpkin will swing from side to side. It
looks pretty funny.)
If you don't want this effect, then don't use the button. Just sew the pumpkin to the ice cream cone. But in this case, the
ice cream itself will not be visible and it will be impossible to separate them.

@MONSTRODOM PAGE 37
Embroider the ice cream cone with beads. So both parts of your pumpkin ice cream
are ready)

@MONSTRODOM PAGE 38
Finally, connect both parts by attaching the pumpkin to the ice cream cone with a button.

@MONSTRODOM PAGE 39
 HALLOWEEN
That's it, Your Pumpkin ice cream is ready! :)

Thanks again for your being with me!

I look forward to a photo of your work!

Don’t forget to mark me by specifying the direct link:

@monstrodom. If you are on Instagram, put the
hashtag #design_by_monstrodom.

I hope you enjoyed being with me and were pleased

with the result.

A would be glad to see you again. See you soon!)

If you click on the Instagram icon, you

will be taken to my creative page.

@MONSTRODOM PAGE 40