Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 10 views

    LightMeter Manual

    Uploaded by

    stuartnoggle

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    LightMeter Manual

    Uploaded by

    stuartnoggle
    10 views2 pages

    Original Title

    110807_LightMeter_Manual

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    10 views2 pages

    LightMeter Manual

    Uploaded by

    stuartnoggle

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    LCD Display / Basic Operation Sekonic L-358

    Quick Guide
    Radio Trigger Mode
    ISO Display

    Exposure
    LOCK LEVER LUMISPHERE
    Compensation
    RETRACTING RING
    Digital Aperture
    Value, Aperture
    Priority, EV
    Brightness
    Difference,
    Average Function, MEASUREMENT
    Analog Scale EV Display
    BUTTON

    All DIP Switches are located in battery compartment

    EV Readout (DIP Switch 1)


    Set DIP Switch 1 (EV) to "ON". Select 8 Ambient Mode. Hold
    Mode key down and turn JOG WHEEL until "EV" is displayed.

    Multi Flash Mode (DIP Switch 2)


    Set DIP Switch 2 (MULTI) to "ON". Hold Mode key down and
    turn JOG WHEEL to select Cord, Cordless or Radio Triggering
    Mode with "MLT" shown on display. Press Measure button
    (flash will fire) until f/stop needed is achieved.
    MEMORY
    Full, 1/2 or 1/3 step display of Shutter Speed and Apertures
    (DIP Switches 3 & 4) Set DIP Switches as shown below.

    Full Step: 1/2 Step: 1/3 Step: MODE KEY


    ON Press while turning JOG WHEEL for:
    ON
    S DAYLIGHT / AMBIENT MODE FLASH CORD
    DDHH
    12 3 4
    OOUfl
    12 3 4
    QOUU
    12 3 4
    S AUTO RESET CORDLESS FLASH MODE
    IS FLASH WITH CORD
    SOCKET

    OFF OFF S FLASH RADIO TRIGGERING MODE


    Basic Operation - Sekonic L-358 Advanced Functions - Sekonic L-358

    On/Off Memory Function


    Press down power key to turn on meter. Battery icon will Take measurement, press Memory button. Up to nine
    appear «m Monitors Battery level. Press and hold Power key readings can be stored and displayed on the analog memory
    to turn off. scale by repeating the procedure. A tenth measurement can
    also be displayed.
    Set ISO 1 or ISO 2
    Hold down ISO 1 or ISO 2 key while turning the JOG WHEEL. Memory Recall Function
    After storing two or more readings in memory: Press and
    Incident meter mode hold both MODE and MEMORY and turn JOG WHEEL to view
    Turn Lumisphere retracting ring counter-clockwise to set the individual stored memory readings.
    Lumisphere in the full UP right position. Select measuring
    mode then press measure button. Averaging Function
    After two or more measurements are memorized, toggle the
    Reflected meter mode AVE./^EV key. Averaged exposure will be displayed in digital
    Mount the Lumigrid (54°) or optional NP (Spot) Finder 1°, and analog readouts. Operates in all measuring modes.
    5°, or 10° to the meters receptor head. Select measuring
    mode then press measure button. Brightness Difference Function
    Can be used in all modes (incident, reflected, ambient and
    Measure Brightness / Contrast Difference flash). Take measurement(s), press the AVE/JEV key. JEV will
    Turn Lumisphere retracting ring clockwise to lower the display. Press and hold down the Measure button. The
    Lumisphere to the DOWN position. Select measuring mode difference between the last memorized reading or averaged
    then press measure button. reading and new area measured is displayed in +/- 1/1 Oth
    steps of EV.
    Ambient Reading
    Select S Ambient Mode by holding down the Mode key and Flash Analyzing
    turning the JOG WHEEL. Press the measure button. In all flash modes: Take a flash measurement. A combined
    reading of both ambient and flash will be displayed. Turn the
    Cord Flash Reading JOG WHEEL to adjust ratio between ambient and flash. Adjust
    Select (g Cord Flash Mode. Connect flash cord. Press aperature and shutter as required on camera.
    measure button,to trigger flash and measure light.
    Exposure Compensation
    Cordless Flash Reading Hold in both ISO 1 and ISO 2 simultaneously and turn the
    Select QB Cordless Flash mode. Press measure button, trigger JOG WHEEL to exposure compensation needed between
    flash manually, meter measures light, automaticaly resets. +/- 9.9 EV

    Radio Triggering Mode (with optional RT-32 Module) Calibration


    Turn power OFF. Remove connector cover inside battery Meter must be turned off. Tap power button once while
    compartment. Insert optional RT-32 Module. Turn Power holding in ISO 1 and ISO 2 keys. CAL will be displayed on
    ON. Hold MODE key in while turning the JOG WHEEL to S panel. Turn the JOG WHEEL while holding down both ISO
    RADIO FLASH TRIGGERING MODE, a blinking channel keys to compensate between +/- 1.0 EV.
    number will appear. Turn JOG WHEEL to select channel
    number (press mode key to select channel and/or Quad Motion Picture (CINE)
    Triggering zones a, b, c, or d available in channels 17-32). Turn the JOG WHEEL (in T Priority Mode) past shutter speed
    Hold MODE key in while turning JOG WHEEL clockwise to 8000 to select f/s (frames per second). Press measure
    return to IS RADIO FLASH TRIGGERING MODE with f/stop button.
    and shutter speed. Press measure button: simultaneously
    fires flash and measures light. Electronic JOG WHEEL Lock and Unlock:
    Hold MODE key in. Toggle ISO 1 key to lock or unlock. "LOc"
    will display briefly.

    You might also like