Swimming Pool
Swimming Pool
Swimming Pool
In the heat of summer your pool can require 4 grams of chlorine per cubic meter of water (1000 litres) of water every day.
Always add the chlorine powder to the water, never the other way around. When adding chlorine powder to water in a bucket, add it
slowly and stir the water all the time. Avoid splashing. Keep stirring the solution in the bucket until all the chlorine has dissolved.
Chlorine is added to the water to kill germs. When it is added to a swimming pool, it forms a weak acid called hypochlorous acid that kills
bacteria like salmonella and E. coli, as well as germs that cause viruses such as diarrhea and swimmer's ear
Besides killing dangerous germs like bacteria, viruses and parasites, chlorine helps reduce disagreeable tastes and odors in
water. Chlorine also helps eliminate slime bacteria, molds and algae that commonly grow in water supply reservoirs, on the walls of water
mains and in storage tanks.
Water (Litres) Commissioning & New Water (Shock) Add Chlorine (Weekly)
Once you have chosen the right type of filter for your pool, it is important to get it sized
properly. It must be sized to match the pump which in turn must match the circulation needs of
the pool. If the filter is undersized, it will fill up quickly and also can be damaged by the force
of the pump. If the filter is undersized, it may not backwash well.
It is important to keep in mind that the manufacturer's flow ratings for filters are often very
optimistic. Our experience suggests that the following guidelines are much more realistic.
On-site analysis must be done to insure that the filter matches up properly with the pump and
the pool. For instance, if the plumbing runs on the equipment are particularly long, then the
resistance to flow in the piping will be greater and intake lines may need to be larger than
specified in this chart.
Note also that this may differ from the recommendations listed by the manufacturer .
The literature may indicate that it is OK to match up a 2.5 or 3.0 hp pump to a 60 square foot
DE filter, but we never recommend it because we have seen plenty of DE filter grids blown out
by these larger sized pumps. It is always better to oversize the filter. With an oversized filter,
the water flows through the filter media at a slower velocity and that results in finer filtration
and longer filter cycles.
Some builders will install a 3.0 hp filter pump on a pool/spa combination in order to give
maximum water flow through the spa jets.
This is nice except for the fact that the pump is so powerful that it has the potential to damage
the grids in the filter. The better way is to install a smaller filtration pump for the pool and then
run a separate booster pump. This keeps you from having to run a large 3.0 hp pump every
day on the normal filter cycles.
The US liquid gallon (frequently called simply "gallon") is legally defined as 231 cubic inches, which is exactly 3.785411784 litres.