Sika Retarder-22
Sika Retarder-22
Sika Retarder-22
Sika® Retarder-22
SET RETARDING CONCRETE ADMIXTURE
PRODUCT INFORMATION
Composition Selected phosphates
Packaging 200 L drum, 1000 L flowbin
Appearance / Colour Light brown liquid
Shelf life 12 months from date of production if stored properly
Storage conditions Store in undamaged, unopened, original sealed packaging in dry conditions
at temperatures between +5 °C and +45 °C. Protect from direct sunlight
and frost.
Density ~1.07 kg/l (+25 °C)
Total Chloride Ion Content Nil (EN 934-2)
1/3
TECHNICAL INFORMATION
Concreting Guidance The standard rules of good concreting practice for production and placing
must be observed when using Sika® Retarder-22 in concrete. Refer to relev-
ant standards.
Fresh concrete must be cured properly especially at high temperatures in
order to prevent plastic and drying shrinkage. Use Sika® Antisol® products
as a curing agent or apply wet hessian.
APPLICATION INFORMATION
Recommended Dosage 0.2 - 1.5 % by weight of binder.
Higher dosages by weight of binder can be used depending on the mix
design, raw materials, climatic conditions and concrete requirements.
Trial mixes must be performed to establish the exact dosage rate required.
Compatibility Sika® Retarder-22 may be combined with all types of Portland cement (OPC
and SRC), concretes containing pozzolanic materials such as GGBS, PFA, mi-
cro-silica and the following Sika products:
Sika® ViscoCrete®, SikaPlast® and Sikament® ranges;
SikaPump®, Sika® FerroGard®-901, SikaFume®, SikaFiber®, Sika Aer®, Sika®
Stabilizer, Sika®-1 WT, Sika® WT-10
We recommend to perform trial mixes to establish the required perform-
ance when combining Sika® Retarder-22 with the above products or other
admixtures. Please consult our Sika Technical Department.
Dispensing Sika® Retarder-22 is added to the gauging water or simultaneously poured
with it into the concrete mixer at the batching plant.
Do not add Sika® Retarder-22 directly to the dry mix.
For optimum utilization of its high water reduction property we recom-
mend thorough mixing at a minimal wet mixing time of 60 seconds.The ad-
dition of the remaining gauging water (to fine tune concrete consistency)
may only be started after two-thirds of the wet mixing time to avoid sur-
plus water in the concrete.
2/3
ECOLOGY, HEALTH AND SAFETY
For information and advice on the safe handling, stor-
age and disposal of chemical products, users shall refer
to the most recent Safety Data Sheet (SDS) containing
physical, ecological, toxicological and other safety-re-
lated data.
LEGAL NOTES
The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
tions. In practice, the differences in materials, sub-
strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
mendations, or from any other advice offered. The
user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
be supplied on request.
SikaRetarder-22-en-AE-(07-2017)-1-1.pdf
3/3