Borchi Gel PN TDS 4
Borchi Gel PN TDS 4
Borchi Gel PN TDS 4
Low shear thickener for water-based coatings systems, VOC-, APEO- and tin-free
Dosage
• 0.5 – 2.0% on total paint formulation
The degree of thixotropy will depend on the type of reactive groups present in the system, the pH of the coating (ideally between
7.5 and 8.5), the level of the desired gel structure and the amount of Borchi® Gel PN used. The exact dosage should be
experimentally determined. Borchi® Gel PN can be added to the mill-base or as a post add provided good mixing conditions are
used.
Storage
Protect from the effects of weathering and store at temperatures between 5 and 30 °C. Once opened, containers should be
resealed immediately after each removal of the product.
Safety
Please refer to our safety data sheet for information relating to product safety.
811 Sharon Drive / Westlake, OH 44145 / Telephone: +1 800-321-9696 / 440-899-2950 / Fax: +1 440-808-7114 / Internet:
www.borchers.com / E-Mail: info.us@borchers.com
PLEASE NOTE: As each customer’s use of our product may be different, information we provide, including without limitation, recommendations, test results,
samples, care/labeling/processing instructions or marketing advice, is provided in good faith but without warranty and without accepting any
responsibility/liability. Each customer must test and be responsible for its own specific use, further processing, labeling, marketing, etc. All sales are
exclusively subject to our standard terms of sale posted at www.milliken.com/terms (all additional/different terms are rejected) unless explicitly agreed
otherwise in a signed writing.
Edition: 08/2021