Catalog Media Converters, Extenders

Catalog
Media Converters,
Extenders, & NIDs
Cost Effective Integration Solutions for Evolving
Networks
www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog

Table of Contents
1 High Density Media Conversion Solutions for 37 CPSVT26xx-10x
Deployments in the Network Core 38 CAPTF33xx-1xx
2 ION219 Chassis 39 Stand-Alone Media Converters Offer Low-Density
3 ION106 Chassis Solutions Deployed at the Network Edge or Remote
4 ION Chassis Locations
5 IONPS-A-R1 40 E-MCR-05
6 IONPS-D 40 RMS19-SA4-01
6 IONDCR-R1 41 RMS19-NID2-01
7 IONPS6-A 41 RMS19-SA4-02
8 IONPS6-D 42 Wall, Rack, DIN Rail Mounting Brackets
9 IONMM Series 43 SPS-2460-xx
10 Part Number Key Chassis Cards 44 J/E-CX-TBT-02
11 C2110 Series 45 E-TBT-FRL-05(xx)
12 C2210 Series 46 E-TBT-FRL-05(xxHT)
13 C2220 Series 47 E-TBT-MC05
14 C3100 Series 48 SSEFE10xx-100
15 C3110 Series 49 E-100BTX-FX-05(xxxx)
16 C3210 Series 50 E-100BTX-FX-05(xxHT)
17 C3220 Series 51 E-TBT-FRL-N-02(xx) & E-100BTX-FX-N-02(xx)
18 C3230 Series 52 F-SM-MM-02 & SFMFF1xxx-20x
19 C4110 Series 53 SSETF101x-205
20 C4120 Series 54 SBFTF1010-130
21 C6010 Series 55 SBFTF10xx-10x
22 C6110 Series 56 IPOTW1052-111-LRT
23 C6120 Series 57 SSRFB10xx-100
24 C6210 Series 58 S2220 Series
25 The IONADP allows the installation of Point 59 SPOEB10xx-105
System Converter Cards and Network Management 60 SISTF101x-211-LRT
Modules in the ION Platform 61 S3100 Series
26 IONADP 62 SFMFF1xxx-22x
27 CPSMM-xxx 63 SGETF10xx-110 Series
28 CETTF10xx-x0x 64 SGFEB10xx-x3x
29 CSEFE10xx-10x 65 SGPOE10xx-1x0
30 CSETF101x-205 66 SISTG10xx-211-LRT
31 CBFTF1010-130 67 S3220 Series
32 CSRFB10xx-10x 68 S3230 Series
33 CGFEB1040-140 & CGFEB4040-180 69 S3290 Series
34 CTGFFxxxx-100 70 EO2PSE4052-111 & EO2PD4052-111
35 CRS2F311x-100 71 EOCPSE4020-110 & EOCPD4020-110
36 CRS4F3x1x-100 72 S4140 Series

73 S4110 Series
74 S4120 Series
75 STGFFxxxx-100
76 S6010 Series
77 S6110 Series
78 S6120 Series
79 S6210 Series
80 SAPTF33xx-1xx
81 J/RS232-xF-01(xx)
82 SRS2F311x-100
83 SRS4F3x1x-100
84 SPSVT26xx-10x
85 SDSFX311x-111-LRT
86 SDSTX3110-121-LRT-B
87 SDSTX3110-124-LRT-B
88 Mini Media Converters Provide Entry-Level Conversion, Ideal for Applications where Physical Space is
Limited
89 M-MCR-01
90 M/E-TX-FX-01
91 M/E-PSW-FX-02(xx)
92 M/E-ISW-FX-01(xx) & M/E-ISW-FX-01AC(xx)
93 M/GE-T-xX-01
94 M/GE-PSW-xX-01
95 M/GE-PSW-SFP-01
96 M/GE-ISW-xx-01
97 M/GE-ISW-SFP-01-PD
98 Rugged Network Solutions for Security & Surveillance Applications
99 MIL-L100i
100 L1000i-at
101 SI-IES-1200-LRT
102 SI-IES-111D-LRT
103 SI-IES-121D-LRT
104 25148

Fiber Integration Technology that Leverages Existing Network
Infrastructure for Future Growth
Transition Networks’ full line of feature-rich media converters transparently connect one type of media, or cabling, to
another – typically copper to fiber. By bridging the gap between legacy copper infrastructures and fiber growth, our
media converters provide an economical path towards extending the distance of an existing network, extending the life
of non-fiber based equipment, or extending the distance between two like devices.
Available in stand-alone, modular chassis-based, or PCI powered configurations, Transition Networks' media converters
offer copper to fiber and fiber to fiber media conversion in the following supported protocols: Ethernet, Fast Ethernet,
Gigabit Ethernet, Power-over-Ethernet, 100/100, 10/100/1000, ATM, T1/E1, DS3/E3, POTS, RS232, RS485 and more.
With industry leading advanced features such as Auto-Negotiation, Auto-MDI/MDIX, Link Pass Through, Active Link
Pass Through, Far End Fault, and Automatic Link Restoration – Transition Networks’ media converters make an invisible
component in the physical layer “visible” to network managers; allowing more efficient troubleshooting and less on-site
maintenance. These cost and time saving features have made Transition Networks’ media converters the #1 choice
among industry IT professionals.

High Density Media Conversion Solutions for Deployments
in the Network Core
• Enterprise Campus Environments • Government and Municipal Agencies

• Healthcare/Medical Facilities • Banking and Financial Institutions
• Higher Education Campuses
CORPORATE HEADQUARTERS
FLOOR 3 REMOTE BUILDING 1
FLOOR 2
FLOOR 1
REMOTE BUILDING 2
Copper Switch
Why Conversion? Product Features
• Extend a network's reach with a fiber infrastructure • Scalable solutions for easy network expansion
• Supports various network communication protocols
• Protect investments in current copper-based within the same chassis
network devices • Hot-swappable slide-in modules for ease of installation
and maintenance
• Conversion provides affordable connections
• Efficiently monitor chassis through management module
between RJ-45 ports and fiber optic cabling
- Accessible through a web-browser, CLI, SNMP,
or Focal Point
• Future proof a network with fiber and protect data
from noise and interference • Advanced security allows for controlled access
- SSH, SSL, Access Control List, Management
VLAN, SNMP v1, v2C, & v3
www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 1
ION219 Chassis
19-Slot Chassis for ION Slide-in Modules
The ION219-x is an intelligent, high-density,
multi-protocol system supporting a variety of Ordering Information
network interface devices. Designed for both ION219-A
carrier class and enterprise network applications 19-Slot Chassis for the ION Platform
AC Powered
where multiple points of fiber integration and
secure network management of the fiber ION219-D
19-Slot Chassis for the ION Platform
interface devices is essential. An end-to-end DC Powered
fiber integration solution can be achieved by
pairing the modules in a high density ION chassis Optional Accessories
with the modules in another ION chassis, or a Transition Networks’ stand-alone device. To take full advantage of IONPS-A-R1
ION Power Supply Module
all the features and functions available with the ION Chassis, an ION Management Module is required. The ION Universal Input 100 - 240 VAC
Management Module connects to the chassis backplane and communicates with the individual cards in the ION
IONPS-D
Chassis. Each slide-in module for the ION Chassis has specific features and functions that are controlled via the -48 VDC Power Supply Module
ION Management Module. A network administrator can configure, monitor and troubleshoot ION slide-in modules
IONMM
remotely via the ION Management Module. ION Management Module
Transition Networks understands that no network is managed in the same manner and that different security IONFP
levels and management interfaces are often required depending on the deployment of the ION Chassis. With that ION Face Plate (required for all empty slots)
(10 face plates included with the ION219-x)
in mind, the ION Platform has been designed to be one of the most versatile and secure fiber integration systems
available today. WMBC-2RU
Wall mount brackets for 2RU Chassis
IONRE-23
Security Features Specifications ION 23" Rack Mount Ears for ION 19-Slot
Chassis (19" ears included with the ION219-x)
When the optional management module Slots (19) Slots in front for ION slide-in modules
is used, the following security features (2) Slots in rear for power supply modules
are available, allowing you to control Status LEDs Power On LED for each installed power supply module
access to the ION Chassis via the ION Dimensions Width: 17" [430 mm] Power Cord Included
Management Module, ensuring that only Depth: 15.8” [401 mm] To order the corresponding country
authorized personnel are able to view Height: 3.5” [89 mm] specific power cord, add the extension
and change the settings to the slide-in Power Input *Two open bays for ION power supply modules from the list below to the end of the
supporting Universal Input 100 – 240 VAC SKU; Ex: ION219-A-NA
modules.
• Management VLAN Power Output -48VDC rated at 200 Watts (max) -NA = Country Code
-NA = North America
• SSL Environment Operating: 0°C to 50°C -LA = Latin America
• SSH Humidity: 5% to 95% (non-condensing) -EU = Europe
Altitude: 0 – 10,000 ft. -UK = United Kingdom
• 802.1x -SA = South Africa
Weight 19 lbs. [8.6 kg] -JP = Japan
• SNMPv1 & V2c, +V3 -OZ = Australia
Compliance UL listed, EN55022, EN55024, CE Mark, -BR = Brazil
FCC Class A, CISPR Class A
Management Features Warranty Lifetime
• Variety of management access
methods including; telnet,
*Note: Power supply module supplies +12 VDC maximum to each slot in the chassis. Only one
Access Method
web, SNMP
power supply module is required to power the chassis and the installed modules, the optional • Web-browser: Access the ION Management
• Single slot design allows for more second power supply module provides redundancy for instant fail-over. Module using a standard web browser such
slide-in modules to be inserted in as Internet Explorer or Mozilla Firefox.
the ION Chassis
• Command Line Interface (CLI): CLI access
• Management VLAN can be done via telnet remotely or via the
local console port on the ION Management
• Based on Public MIBs
Module.
• (2) 10/100 Ethernet interfaces
• SNMP: Since the ION platform is based on
• USB console port public MIBs you can easily manage the ION
with a standard network management
• TFTP upgrade/backup of system (NMS) such as SNMPc, HPOV or any
slide-in modules other standard SNMP platform.
• Import/Export configuration files • Focal Point: Transition Networks offers a
in human readable/editable format free SNMP graphical user interface (GUI)
software (Focal Point) for management
• Multiple community strings
purposes. Focal Point offers full read and
read/write capabilities in a user friendly GUI.

ION106 Chassis
6-Slot Chassis for ION Slide-in Modules
The ION106-x is an intelligent, multi-service
integration platform that offers first-rate solutions Ordering Information
for integrating, optimizing and navigating ION106-A
networks, all in a 19" rack mountable 1RU form 6-Slot ION Chassis with (1) AC power supply
factor. ION106-D
6-Slot ION Chassis with (1) DC power supply
By cost-effectively integrating copper-
ION106-AAB
based equipment into a fiber infrastructure, 6-Slot ION Chassis with (2) AC power supplies
the ION Platform equips networks for the
ION106-AAMB
bandwidth, distance, and security demands 6-Slot ION Chassis with (2) AC power supplies
of today, tomorrow, and every point in between. Designed for service providers, data centers, and core network and (1) ION Management Module
applications, the ION Platform provides the secure network management of fiber interface points required for both
Optional Accessories
carrier-class and enterprise-class services.
IONPS6-A
Media conversion technology allows for the integration of fiber optic cabling into environments with copper-based Redundant ION Power Supply Module for ION
equipment. Transition Networks’ ION media converters provide a quick, inexpensive method for connecting new 6-Slot Chassis, Universal input 100 – 250 VAC
or embedded fiber with copper-based networking devices. The ION Platform accommodates a variety of modules IONPS6-D
and interface devices supporting multiple protocols and networking environments, including Ethernet and TDM Redundant ION Power Supply Module for ION
6-Slot Chassis, 21 to -72VDC and +21 to
networks. With optimum flexibility built in, ION is equally suited for either single-unit network edge or high-density +72VDC input
applications within enterprises or central offices. The ION Platform provides simple navigation of all the connected
IONMM
network interfaces, allowing various components to be easily configured, monitored and managed remotely while ION Management Module
providing a high level of secure access to the management data. Transition Networks’ ION solutions allow users to IONFP
easily integrate copper and fiber in order to extend networks within a building, between buildings, or throughout a ION Face Plate (required for all empty slots)
campus where multiple points of fiber integration and secure network management of the fiber interface devices (4 face plates included with the ION106-x)
is essential. IONRE6-23
23" Rack Mount Ears for ION 6-Slot Chassis
An end-to-end fiber integration solution can be achieved by pairing the modules in an ION chassis with the (19" ears included with the ION106-x)
modules in another ION chassis or an ION stand-alone device. To take full advantage of all the features and
functions available with the ION Chassis, an ION Management Module is required. The ION Management Module
connects to the chassis backplane and communicates with the individual cards in the ION Chassis. Each slide-in Security Features
module for the ION Chassis has specific features and functions that are controlled via the ION Management When the optional management module
Module. A network administrator can configure, monitor and troubleshoot ION slide-in modules remotely via the is used, the following security features
ION Management Module. are available, allowing you to control
access to the ION Chassis via the ION
Management Features Specifications Management Module, ensuring that only
authorized personnel are able to view
• Variety of management access Slots (6) Slots in front for ION slide-in modules
(2) Slots in front for power supply modules and change the settings to the slide-in
methods including; telnet,
Status LEDs Power On LED for each installed power supply module
modules.
web, SNMP
• Management VLAN
Dimensions Width: 17" [430 mm]
• The single slot management module Depth: 10” [254 mm] • SSL
design allows for more slide-in modules Height: 1.75” [44.45 mm] • SSH
to be inserted in the ION Chassis • 802.1x
Power Supply *Two open bays for ION 6-slot power supply modules
• Management VLAN supporting: AC: 100-240VAC • SNMPv1 & V2c, +V3
DC: -21 to -72VDC and +21 to +72VDC
• Based on Public MIBs Environment Operating: 0°C to 50°C
Access Method
Storage: -40°C to 85°C
• (2) 10/100 Ethernet interfaces • Web-browser: Access the ION Management
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft. Module using a standard web browser such
• USB console port as Internet Explorer or Mozilla Firefox.
Shipping Weight 10 lbs. [4.5 kg]
• TFTP upgrade/backup of • Command Line Interface (CLI): CLI access
Compliance UL listed, EN55022 Class A, EN55024, CE Mark,
slide-in modules FCC Class A, CISPR Class A can be done via telnet remotely or via the
• Import/Export configuration files Warranty Lifetime local console port on the ION Management
in human readable/editable format *Note: Power supply module supplies +12VDC maximum to each card slot in the chassis.
Module.
Only one power supply module is required to power the chassis and the installed modules, the • SNMP: Since the ION platform is based on
• Multiple community strings optional second power supply module provide redundancy for instant fail-over.
public MIBs you can easily manage the ION
with a standard network management
Power Cord Included system (NMS) such as SNMPc, HPOV or any
To order the corresponding country specific power cord, add the extension from the other standard SNMP platform.
list below to the end of the SKU; Ex: ION106-A-NA
• Focal Point: Transition Networks offers a
-NA = Country Code free SNMP graphical user interface (GUI)
-NA = North America, -LA = Latin America, -EU = Europe, -UK = United Kingdom
-SA = South Africa, -JP = Japan, -OZ = Australia, -BR = Brazil software (Focal Point) for management
read/write capabilities in a user friendly GUI.

ION Chassis
1-Slot and 2-Slot Chassis for ION Modules
The ION Platform consists of a 19-slot, 2-slot, and 1-slot chassis,

along with a variety of slide-in media converter modules. The high Ordering Information
density 19-slot chassis is designed for core network and Data Center ION001-A
applications where there is a need for high volume and centralized 1-Slot Chassis for the ION Platform
AC Powered
points of media conversion. While at the network edge, the 1-slot and
2-slot ION chassis’ are designed to allow a single card, two cards, ION002-AD
2-Slot Chassis for the ION Platform with AC or
ION001-A or one double-wide card to be deployed as a stand-alone media DC power options
converter.
Optional Accessories (sold separately)
IONFP
ION Blank face plate
WMBP
Wall Mount Bracket: 5" [127 mm]
ION002-AD
Power Supply Included

Features Specifications To order the corresponding country
Slots ION001-A (1) Slot in front for ION slide-in modules specific power supply, add the
• Desktop installation extension from the list below to the end
ION002-AD (2) Slot in front for ION slide-in modules
of the SKU; Ex: ION001-A-NA
• Supports WMBP wall mount brackets Status LEDs None, Power indicator is on the slide-in card
-NA = Country Code
• Unmanaged Chassis Dimensions ION001-A Width: 4" [102 mm] -NA = North America
Depth: 7.1” [180 mm] -LA = Latin America
• Supports any ION slide-in card that Height: 1.2” [30.48 mm] -EU = Europe
ION002-AD Width: 4" [102 mm] -UK = United Kingdom
requires 6 Watts or less of power Depth: 7.1” [180 mm] -SA = South Africa
(C4120-1048 is not supported) Height: 2.2” [55.88 mm] -JP = Japan
-OZ = Australia
• Fan-less design Power Supply ION001-A External AC/DC power supply included, -BR = Brazil
120-240VAC input, 12VDC Output
• External AC power ION002-AD External AC/DC power supply included,
120-240VAC input, 12VDC Output or an optional
• DC power input is an option on the 2 two-wire 21-60 VDC input terminal block
slot chassis Environment Operating: 0°C to 50°C
Storage: -20°C to +85°C
• Support IP addressable managed ION Humidity: 5% to 95% (non-condensing)
slide-in cards Altitude: 0 – 10,000 ft.
Weight ION001-A: 2 lbs. [0.9 kg]
ION002-AD: 3 lbs. [1.35 kg]
Compliance UL listed, EN55022, EN55024, CE Mark,
Warranty Lifetime

IONPS-A-R1
AC Power Supply Module For The ION Platform
The ION Platform is an intelligent, high-
density, multi-protocol system supporting a Ordering Information
variety of network interface devices. Designed IONPS-A-R1
for both carrier class and enterprise network Redundant AC Power Supply for
applications where multiple points of fiber 19-Slot ION Chassis
integration and secure network management
of the fiber interface devices is essential.
The ION 19-slot chassis can support up to

IONPS-A-R1
two power supply modules which mount in
the rear of the chassis. A single power supply Specifications
can be used to power all the devices installed Application Up to 2 power supply modules can be used in the 19-
in the chassis; however the system can be slot ION chassis, ION219-A
made redundant with the use of a second Dimensions Width: 8.3” [211 mm]
power supply. In this configuration, the power Depth: 9” [229 mm]
supplies operate in an instant-fail-over mode Height: 3.4” [86 mm]
and can be installed in either an AC or DC Power Input 100 – 240 VAC, 47 – 63 Hz, 3.5 A @ 100 VAC,
and 120 - 250 VDC
powered chassis.
Environment Operating: 0°C to 50°C
Altitude: 0 – 10,000 ft.
Weight 3.4 lbs. [1.5 kg]
Compliance UL Listed (UL60950), FCC Class A,
CISPR Class A, CE Mark
Warranty Lifetime

IONPS-D
DC Power Supply Module For The ION Platform
The ION Platform is an intelligent, high-
density, multi-protocol system supporting a Ordering Information
variety of network interface devices. Designed IONPS-D
for both carrier class and enterprise network Redundant -48 VDC Power Supply Module for
applications where multiple points of fiber 19-Slot ION Chassis
integration and secure network management Optional Accessories (sold separately)
of the fiber interface devices is essential.
IONDCR-R1
Dry contact relay module for DC Power
Supply - See Below
The ION chassis can support up to two power
supply modules which mount in the rear of the IONPS-D
chassis. A single power supply can be used to
power all the devices installed in the chassis; Specifications
however the system can be made redundant Application Up to 2 power supply modules can be used in the
19-slot ION chassis, ION219-D
with the use of a second power supply. In this
Status LEDs PWR(Power): Indicates the power supply module is
configuration, the power supplies operate in providing power to the ION chassis
an instant-fail-over mode.
Dimensions Width: 8.3” [211 mm]
Depth: 9” [229 mm]
Height: 3.4” [86 mm]
Power Input 48 VDC (40-60 VDC) @ 5A
Weight 4 lbs. [1.81 kg]
Compliance UL Listed (UL60950), FCC Class A,
CISPR Class A, CE Mark
Warranty Lifetime
IONDCR-R1
Dry Contact Relay Module
The IONDCR-R1 is a field installable dry
contact relay module for the IONPS-D power Ordering Information
supply. This module mounts in the lower IONDCR-R1
right-hand corner of the IONPS-D face-plate, Dry contact relay module for DC Power
allowing the power supply to be tied into Supply
a separate alarm circuit. Contacts will be
activated on the loss of power, enabling an IONDCR-R1
external visual or audible alarm.
Applications for this type of fault alarm

output would include enterprise networks
as well as in industrial applications. The dry
contact relay modules provides another layer
of fault indicators, complementing network
management software by providing a signal to
either a local or remote alarm system.

IONPS6-A
AC Power Supply Module for the ION 6-Slot Chassis
The IONPS6-A is a redundant AC power supply module for use
in the ION106-x chassis, which is an intelligent, multi-service Ordering Information
integration platform that offers first-rate solutions for integrating, IONPS6-A
optimizing and navigating networks. By cost-effectively integrating Redundant AC power supply for ION 6-Slot
Chassis, 100 to 240 VDC input
copper-based equipment into a fiber infrastructure, the ION
Platform equips networks for the bandwidth, distance, and
security demands of today, tomorrow, and every point in between.
Designed for service providers, data centers, and core network
applications, the ION Platform provides the secure network management of fiber interface points required for both
Power Cord Included
carrier-class and enterprise-class services.
To order the corresponding country
The ION 6-Slot Chassis can support up to two hot-swappable power supply modules which mount in the front specific power cord, add the extension
of the chassis. A single power supply can be used to power all of the slide-in modules installed in the chassis, from the list below to the end of the
SKU; Ex: IONPS6-A-NA
additionally; the system can be made redundant with the use of a second AC or DC power supply. In this
configuration, the power supplies operate in an instant fail-over mode. -NA = Country Code
-NA = North America
Management and configuration of the power supply modules is available when the IONMM management module -LA = Latin America
-EU = Europe
card is installed in the ION106-x chassis. -UK = United Kingdom
-SA = South Africa
-JP = Japan
Specifications -OZ = Australia
-BR = Brazil
Application Up to 2 power supply modules can be used in the 6-Slot ION
Chassis, ION106-x
Status LEDs Power On LEDs for each installed power supply module are
installed on the frame of the ION106-x chassis
Dimensions Width: 1.63" [41.4 mm]
Depth: 3” [76.2 mm]
Height: 9.75” [247.7 mm]
Power Input 100-240 VAC, 47-63 Hz, 1.2A, and 120 - 300 VDC
Altitude: 0 – 10,000 ft. (with de-rating)
Warranty Lifetime

IONPS6-D
DC Power Supply Module for the ION 6-Slot Chassis
The IONPS6-D is a redundant DC power supply module for use in the
ION106-x chassis, which is an intelligent, multi-service integration Ordering Information
platform that offers first-rate solutions for integrating, optimizing IONPS6-D
and navigating networks. By cost-effectively integrating copper- Redundant DC power supply for ION 6-Slot
Chassis, 18 to 72 VDC input
based equipment into a fiber infrastructure, the ION Platform equips
networks for the bandwidth, distance, and security demands of
today, tomorrow, and every point in between. Designed for service
providers, data centers, and core network applications, the ION
Platform provides the secure network management of fiber interface
points required for both carrier-class and enterprise-class services.
The ION 6-Slot Chassis can support up to two hot-swappable power supply modules which mount in the front
of the chassis. A single power supply can be used to power all of the slide-in modules installed in the chassis,
additionally; the system can be made redundant with the use of a second AC or DC power supply. In this
configuration, the power supplies operate in an instant fail-over mode.
Management and configuration of the power supply modules is available when the IONMM management module
card is installed in the ION106-x chassis.
Specifications
Application Up to 2 power supply modules can be used in the 6-Slot ION
Chassis, ION106-x
Status LEDs Power On LEDs for each installed power supply module are
installed on the frame of the ION106-x chassis
Dimensions Width: 1.63" [41.4 mm]
Depth: 3” [76.2 mm]
Height: 9.75” [247.7 mm]
Power Input 18 to 72 VDC @ 6A (max)
Altitude: 0 – 10,000 ft. (with de-rating)
Warranty Lifetime

IONMM Series
The ION Management Modules
To take full advantage of the features and functions available with the ION Chassis,
an ION Management Module is required. The ION Management Module connects Ordering Information
to the chassis backplane and communicates with the individual cards in the ION
IONMM
Chassis. To maintain data security, only management traffic, no end-user data Management Module for the ION Chassis with
traffic, is sent across the ION Chassis backplane. a USB Type B CLI port
Each slide-in module for the ION Chassis has specific features and functions that IONMM-232 *COMING SOON*
Management Module for the ION Chassis with
are controlled via the ION Management Module. A network administrator can a RS232 RJ-45 CLI port
configure, monitor and troubleshoot ION slide-in modules remotely via the ION
IONMM Management Module. This remote management helps reduce Operating Expenses
(OpEx) by reducing technician dispatches. Remote management allows for faster
mean-time-to-repair (MTTR) by proactively sending traps and alerts on potential
issues. With less downtime you are able to focus on revenue generating aspects of
your business.
Transition Networks understands that no network is managed in the same manner
and that different security levels and management interfaces are often required
depending on the deployment of the ION Chassis. With that in mind, we have made
the ION Management Module one of the most versatile and secure management
modules available today.
IONMM-232
*COMING SOON*
Specifications Access Methods

Standards IEEE 802.3
• Web-browser: Access the ION Management
IEEE 802.1X
Module using a standard web browser
Ports IONMM:
Features (2) 10/100 Mbps RJ-45
such as Internet Explorer or Mozilla Firefox.
USB 2.0 device port • Command Line Interface (CLI): CLI access
• Management VLAN USB 2.0 host port
can be done via telnet remotely or via the
Ports IONMM-232: local console port on the ION Management
• TLS/SSL (2) 10/100 Mbps RJ-45 Module.
USB 2.0 device port
• SSH (1) RS232 RJ-45 host port -- Choose between a management module
• 802.1x/RADIUS Dimensions Width: 0.86” [22 mm] with a USB Type B CLI port or a RS232
Depth: 6.5” [165 mm] RJ-45 CLI port
• SNMPv1 & v2c, and v3
Power Consumption 2 Watts under normal operation • SNMP: Since the ION platform is based on
• ACL Rules 4.8 Watts with full 2.5 Watts used by USB host port public MIBs you can easily manage the
(Example: Flash Drive connected requiring 2.5 Watts) ION with a standard network management
Environment specs are dependent on the chassis chosen
Environment system (NMS) such as SNMPc, HPOV or
Management Features Operating: 0°C to 50°C any other standard SNMP platform.
• Variety of management access methods Altitude: 0 – 10,000 ft. • Focal Point: Transition Networks offers a
including; telnet, web, SNMP Weight 1 lb. [0.45 kg] free SNMP graphical user interface (GUI)
software (Focal Point) for management
• Single slot design allows for more Compliance EN55022 Class A, EN55024, CE Mark
slide-in modules to be inserted in the Warranty Lifetime read/write capabilities in a user friendly
ION Chassis GUI.
• Based on Public MIBs
• (2) 10/100 Ethernet interfaces
• TFTP upgrade/backup of slide-in
modules
• Import/Export configuration files in
human readable/editable format
• Multiple community strings
• SNTP

Part Number Key Chassis Cards
1 2 3 4 5 6 7 8 9 x x
Character #1 Characters #6, 7, 8, 9

S Stand-Alone 10 RJ-45
C Chassis 11 Multimode ST
13 Multimode SC
Characters #2, 3 14 Single Mode SC
21 100Base Ethernet 15 Single Mode SC Long Haul
22 10/100 Ethernet 16 Single Mode SC Extra Long Haul
31 1000Base Ethernet 17 Single Mode SC Long Wave 1550
32 10/100/1000 Ethernet
19 Single Mode LC
41 10GBase Ethernet
24 Extended Multimode SC
42 10/100/1000/10G
29 Single Fiber SC
60 T1/E1
30 Dual BNC
61 4xT1
62 DS3-T3/E3 33 RJ-11
35 Single Mode SC Long Wave 1550 Extended
Characters #4, 5 39 Multimode LC
10 Standard Conversion
40 SFP Slot
20 Advanced Management
47 XFP Slot
xx Unique Identifier
48 SFP+ Slot
Additional Expandable Characters (xx)

Part numbers grow as new products with new features
or capabilities are designed. For example:
A1 Single Strand 1310TX/1550RX
A2 Single Strand 1550TX/1310RX

C2110 Series
ION Fast Ethernet Media Converter Module
100Base-TX to 100Base-FX
The ION C2110 device provides an interface between 100Base-TX

ports and 100Base-FX ports allowing users to integrate fiber optic Ordering Information
cabling into 100Base-TX copper environments. C2110-1011
100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
C2110-1013
100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1300nm multimode (SC)
C2110-1013 [2 km/1.2 mi.] Link Budget: 11.0 dB
C2110-1039
100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1300nm multimode (LC)
Features Specifications [2 km/1.2 mi.] Link Budget: 11.0 dB
Standards IEEE 802.3 C2110-1014

• Auto-Negotiation of speed and duplex 100Base-TX (RJ-45) [100 m/328 ft.]
on TP port Data Rate 100 Mbps, Layer 1 to 100Base-FX 1310nm single mode (SC)
Switches SW1: Auto-Negotiation (UP = enabled) [20 km/12.4 mi.] Link Budget: 16.0 dB
• Auto-MDI/MDIX on TP port
SW2: Pause (UP=enabled) C2110-1019
• Link Pass Through SW3: Link Pass Through (UP = enabled) 100Base-TX (RJ-45) [100 m/328 ft.]
SW4: Far-End-Fault (FEF) (UP = enabled) to 100Base-FX 1310nm single mode (LC)
• Far-End-Fault (FEF) detection [20 km/12.4 mi.] Link Budget: 17.3 dB
Internal Jumpers Auto-MDI/MDIX: Enable/Disable
• Automatic Link Restoration C2110-1040
Jumpers Hardware: Mode of operation is determined by the settings
• Pause advertisement on the 4-position switch 100Base-TX (RJ-45) [100 m/328 ft.]
Software: Mode of operation is determined by the to 100Base-X SFP Slot (empty)
• Field Upgradeable Firmware most recently saved on-board microprocessor settings
• Can be used in any ION Platform Chassis Status LEDs PWR (Power): ON = Connection to powered backplane Single Fiber Products
LKC (Copper Link): ON = Copper Link
• Standards based, will link with any RXC (Receive Copper): Blinking = Data received Recommended use in pairs
Standard 100Base-TX and any on Copper link C2110-1029-A1
Standard 100Base-FX ports LKF (Fiber Link): ON = Fiber Link 100Base-TX (RJ-45) [100 m/328 ft.]
RXF (Receive Fiber): Blinking = Data received on Fiber Link to 100Base-FX 1310nm TX/1550nm RX
Dimensions Width: 0.86” [22 mm] single fiber single mode (SC) [20 km/12.4 mi.]
Depth: 6.5” [165 mm] Link Budget: 19.0 dB
Height: 3.4” [86 mm] C2110-1029-A2
Manageable Features Power Consumption 2.5 Watts, 200 mA @ 13.9 VDC 100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1550nm TX/1310nm RX
Environment single fiber single mode (SC) [20 km/12.4 mi.]
• Report converter status to chassis Operating: 0°C to 50°C Link Budget: 19.0 dB
management software: Humidity: 5% to 95% (non-condensing)
-- TP and Fiber Link Status Altitude: 0 – 10,000 ft.
-- Hardware switch settings Weight 1 lb. [0.45 kg]
-- Copper Port Speed Compliance CISPR/EN55022 Class A, FCC Class A, CE Mark
-- TP and Fiber Port Duplex Warranty Lifetime
-- Fault condition
• Write operation includes:

-- Power on/off device
-- Auto-Negotiation enable/disable
-- Force 10 Mbps or 100 Mbps
-- Force half or full-duplex
-- Select advertising modes when

Auto-Negotiation is enabled
-- LPT enable/disable
-- FEF enable/disable
-- Pause enable/disable
-- Auto-MDI/MDIX enable/disable
Note: Manageable Features are available when

used in an ION Platform chassis along with an
ION Management Module.

C2210 Series
ION Fast Ethernet Media and Rate Converter
Module
Fast Ethernet 10/100Base-TX to 100Base-FX
The ION C2210 device provides an interface between 10/100Base-TX
ports and 100Base-FX ports allowing users to integrate fiber optic Ordering Information
cabling into 10/100Base-TX copper environments. C2210-1011
Operating at Layer 2, this converter not only converts copper to fiber, 10/100Base-TX (RJ-45) [100 m/328 ft.]
it also does Rate conversion, converting 10/100Base-TX copper to [2 km/1.2 mi.] Link Budget: 11.0 dB
100Base-FX fiber.
C2210-1013
10/100Base-TX (RJ-45) [100 m/328 ft.]
C2210-1013 C2210-1039
10/100Base-TX (RJ-45) [100 m/328 ft.]
Standards IEEE 802.3u C2210-1014

• Auto-Negotiation of speed and duplex 10/100Base-TX (RJ-45) [100 m/328 ft.]
IEEE 802.3x
on TP port to 100Base-FX 1310nm single mode (SC)
Data Rate 10 Mbps; 100 Mbps Layer 2 [20 km/12.4 mi.] Link Budget: 16.0 dB
• Auto-MDI/MDIX on TP port MAC Address Table 1K C2210-1019
• Link Pass Through Frame Buffer Memory 512 Kbits 10/100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1310nm single mode (LC)
Max Frame Size 2048 bytes [20 km/12.4 mi.] Link Budget: 17.3 dB
• Far-End-Fault (FEF) detection
Switches SW1: Auto-Negotiation (UP = enabled) C2210-1040
• Pause (Software Controlled) SW2: Forced 100 Mbps/10 Mbps with Auto-Neg. off 10/100Base-TX (RJ-45) [100 m/328 ft.]
(UP = 100 Mbps) to 100Base-X SFP Slot (empty)
• Automatic Link Restoration SW3: Forced Full/Half-Duplex with Auto-Neg. off (UP = Full)
SW4: Full/Half-Duplex on fiber port (UP = Full)
• Field Upgradeable Firmware SW5: Auto-MDI/MDIX on UTP (UP = enabled)
SW6: Link Pass Through (UP = enabled) Single Fiber Products
• Can be used in any ION Platform Recommended use in pairs
Internal Jumpers Auto-MDI/MDIX: Enable/Disable
Chassis
Jumpers Hardware: Mode of operation is determined C2210-1029-A1
• Standards based, will link with any by the settings on the 4-position switch 10/100Base-TX (RJ-45) [100 m/328 ft.]
standard 10/100Base-TX and any Software: Mode of operation is determined by the to 100Base-FX 1310nm TX/1550nm RX
most recently saved on-board microprocessor settings single fiber single mode (SC)
standard 100Base-FX ports [20 km/12.4 mi.] Link Budget: 19.0 dB
Status LEDs FD (Fiber Duplex): ON= Full-duplex on fiber
LACT (Fiber Link/Activity): ON = Fiber Link C2210-1029-A2
Manageable Features PWR (Power): ON=Connection to powered backplane
(TP. Duplex/Link): Yellow = Half duplex, Green = Full-Duplex
10/100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1550nm TX/1310nm RX single
• Report converter status to chassis (TP. Speed): Yellow = 10Mbps, Green = 100 Mbps fiber single mode (SC) [20 km/12.4 mi.]
Link Budget: 19.0 dB
management software: Dimensions Width: 0.86” [22 mm]
Depth: 6.5” [165 mm]
-- TP and Fiber Link Status
Height: 3.4”[86 mm]
-- Hardware switch settings
Power Consumption 2.5 Watts, 200 mA @ 13.9 VDC
-- Copper Port Speed
Environment
-- TP and Fiber Port Duplex
Operating: 0°C to 50°C
-- Fault condition Humidity: 5% to 95% (non-condensing)
Weight 1 lb. [0.45 kg]
-- Auto-Negotiation enable/disable Compliance CISPR/EN55022 Class A, FCC Class A, CE Mark, EN55024
-- Force 10 Mbps or 100 Mbps Warranty Lifetime

-- Force half or full-duplex
-- Select advertising modes when

Auto-Negotiation is enabled
-- LPT enable/disable
-- FEF enable/disable
-- Auto-MDI/MDIX enable/disable


C2220 Series
ION Fast Ethernet Remotely Managed NID Module
10/100Base-TX to 100Base-FX with OAM/IP-Based Management
The ION 2220 Series of Network Interface Devices (NIDs) are a remotely
managed product that offers IP or IP-Less management methods for secure
delivery of Ethernet services for business and mobile backhaul applications.
Ordering Information
With MEF 9, 14 and 21 certification, the ION 2220 Series ensures you are C2220-1011
compliant with the latest standards. The ION 2220 Series is a product with 10/100/1000Base-T (RJ-45) [100 m]
advance features including – IEEE 802.3ah Link OAM, VLAN, QoS, SSH/SSL, to 100Base-FX 1300nm multimode (ST)
jumbo frame support and bandwidth allocation.
C2220-1013
Applications include: Ethernet in the First Mile (EFM), Fiber to the Premises
10/100/1000Base-T (RJ-45) [100 m]
(FTTP), E-Line Services (EPL & EVPL), and Enterprise Markets. to 100Base-FX 1300nm multimode (SC)
C2220-1013
C2220-1014
10/100/1000Base-T (RJ-45) [100 m]
to 100Base-FX 1310nm single mode (SC)

• MEF 9, 14 + 21 certified 10/100/1000Base-T (RJ-45) [100 m]
IEEE 802.3ah
to 100Base-X SFP Slot (empty)
• 802.3ah Link OAM IEEE 802.1P
IEEE 802.1Q
• 10K Jumbo Frame Support *Note all units feature USB port for local
Data Rate Copper: 10/100/1000 Mbps management application.
• Two selectable Remote Management Fiber: 100 Mbps
modes: Filtering Address 8K MAC Addresses
-- IP-Based Remote Management Max Frame Size 10,240 bytes
-- In-Band (remote device managed by Dimensions Width: 0.86” [22 mm]
local peer) Depth: 6.5” [165 mm]
• Auto-MDI/MDIX
Power Consumption 4.5 Watts
• Auto-Negotiation
Environment
• Pause Operating: 0°C to 50°C
• Link Pass Through Altitude: 0 – 10,000 ft.
• Far-End-Fault (FEF) Weight 1 lb. [0.45 kg]
Compliance EN55022 Class A, EN55024, CE Mark
• Remote Loopback
Warranty Lifetime
• Field Upgradeable Firmware
• IEEE 802.1p q VLAN and double VLAN
tagging with 4096 VIDs
• DHCP client
• SNTP
• TFTP
• RADIUS client
• RMON counters for each port
• Bandwidth profiling
• DMI Optical Management
• Cable diagnostic function for
copper ports
• SSH
• Telnet
• Command Line Interface (CLI)
• Web management
• Focal Point management
• SNMP v1, v2c, and v3
• USB port for basic setup
• Management VLAN

C3100 Series
ION Fiber to Fiber Media Converter Module
SFP to SFP for Data Rates from 100Mbps to 2.5 Gbps
This fiber to fiber converter card is a protocol independent device that

supports data rates from 100Mbps up to 2.5 Gbps. Installed in an ION Ordering Information
chassis, it provides reliable and cost-effective conversion between C3100-4040
single mode and multimode fiber, while also providing wavelength 100Mbps to 2.5Gbps fiber repeater with two
conversion in CWDM applications. As an SFP based device, this open SFP slots, any rate to same rate. ION
Chassis Card media converter
any-rate to similar-rate converter offers great application flexibility.
Supported protocols, fiber connectors, and transmission distances are
determined by the SFP module used on the converter.
C3100-4040
Features Specifications
Standards Multi-Source Agreement (MSA)
• ION Chassis Card
Small Form Factor Pluggable (SFP)
• Protocol Transparent Data Rates Protocol Independent
100Mbps to 2.5 Gbps
• Supports data rates from 100Mbps to
Max Frame Size 16384 bytes Jumbo Frames Supported
2.5Gbps
Status LEDs PWR ON (Green) = Power
• Any-rate to similar-rate conversion Port 1 Link ON = Fiber Signal Detected
Port 2 Link ON = Fiber Signal Detected
• SFP to SFP Fiber Repeater
• Specific wavelength CWDM Depth: 6.5” [165 mm]
Transponder
Power Consumption 2-3 Watts, based on the SFP modules used
• Supported protocols: Fast Ethernet, Power Supply External AC/DC required: 12VDC
Gigabit Ethernet, SONET (OC-3/12/48),
1 & 2 Gig Fiber Channel, 2.5G Environment specs are dependent on the chassis chosen
Environment
InfiniBand, FDDI, ESCON/SBCON Humidity: 5% to 95% (non-condensing)
• DMI, Digital diagnostics statistics
available through ION Management Weight 1 lb. [0.45 kg]
Module MTBF Greater than 250,000 hours (MIL-HDBK-217F)
Greater than 687,000 hours (Bellcore)
• Link Pass Through
Compliance FCC Class A, EN55022 Class A, EN55024, CE Mark
• Automatic Link Restoration Warranty Lifetime

C3110 Series
ION Gigabit Ethernet Media Converter Module
1000Base-T to 1000Base-SX/LX
The ION C3110 device provides an interface between
1000Base-T ports and 1000Base-SX/LX ports allowing users
to integrate fiber optic cabling into 1000Base-T copper Ordering Information
environments.
C3110-1013
1000Base-T (RJ-45) [100 m/328 ft.]
to 1000Base-SX 850nm multimode (SC)
[62.5/125 μm fiber: 220 m/722 ft.]
[50/125 μm fiber: 550 m/1804 ft.]
Link Budget: 8.5 dB
C3110-1039
1000Base-T (RJ-45) [100 m/328 ft.]
C3110-1013 to 1000Base-SX 850nm multimode (LC)
via SFP
[62.5/125 μm fiber: 220 m/722 ft.]
Link Budget: 8.0 dB
Features Specifications [50/125 μm fiber: 550 m/1804 ft.]
Link Budget: 8.0 dB
Standards IEEE 802.3ab
• Copper and Fiber Auto-Negotiation C3110-1024
IEEE 802.3z
IEEE 802.3 2000 1000Base-T (RJ-45) [100 m/328 ft.]
• Auto-MDI/MDIX on TP port
to 1000Base-SX 1310nm extended multimode
Data Rate 1000 Mbps, Layer 1
• Transparent Link Pass Through [62.5/125 μm fiber only] (SC) [2 km/1.2 mi.]
Switches SW1: Remote Fiber Fault Detect Link Budget: 7.0 dB
• Remote Fault Detect SW2: Pause (symmetric)
SW3: Pause (asymmetric) C3110-1014
SW4: Transparent Link Pass Through (Up=Enabled) 1000Base-T (RJ-45) [100 m/328 ft.]
• Loopback to 1000Base-LX 1310nm single mode (SC)
SW5: Fiber Auto-Negotiation (Down=Enabled)
SW6: Loopback [10 km/6.2 mi.] Link Budget: 10.5 dB
• Pause
Jumpers Hardware: Mode of operation is determined by the settings on C3110-1040
• Automatic Link Restoration the 4-position switch 1000Base-T (RJ-45) [100 m/328 ft.]
Software: Mode of operation is determined by the most to 1000Base-X SFP Slot (empty)
• Field Upgradeable Firmware recently saved on-board microprocessor settings
• Can be used in any ION Platform Status LEDs LKF (fiber link): On = Fiber Link, blinking activity
PWR (Power): On = Connection to powered backplane
Single Fiber Products
Chassis
TP LED 1 (Copper Link): On = Link, blinking activity C3110-1029-A1
• Cost effective fiber deployment TP LED2 (Copper Duplex): On = Full-Duplex 1000Base-T (RJ-45) [100 m/328 ft.]
by pairing C3110 with lower cost Dimensions Width: 0.86” [22 mm] to 1000Base-LX 1310nm TX/1550nm RX
single fiber single mode (SC)
1000Base-T switches, offering the Depth: 6.5” [165 mm]
benefits of fiber without the high costs Height: 3.4” [86 mm]
Power Consumption 3.6 Watts, 300mA @ 112 VDC C3110-1029-A2
• Standards based, will link with any 1000Base-T (RJ-45) [100 m/328 ft.]
standard 1000Base-T and any standard Environment specs are dependent on the chassis chosen
Environment to 1000Base-LX 1550nm TX/1310nm RX
Operating: 0°C to 50°C single fiber single mode (SC) [20 km/12.4 mi.]
1000Base-SX or LX ports Humidity: 5% to 95% (non-condensing) Link Budget: 13.0 dB
Manageable Features Weight 1 lb. [0.45 kg]
• Report converter status to chassis Compliance CISPR/EN55022 Class A, FCC Class A, CE Mark, EN55024
management software: Warranty Lifetime
-- Copper and Fiber link/receive status
-- Receive error count

-- Write operation enable/disable
-- Auto-Negotiation enable/disable
-- Remote Fiber Fault Detect
-- Transparent Link Pass Through enable/
disable
-- Symmetric Pause
-- Asymmetric TX Pause
-- Asymmetric RX Pause


C3210 Series
ION Gigabit Ethernet Media and Rate Converter Module
10/100/1000Base-T to 1000Base-SX/LX
The ION C3210 device provides an interface between

10/100/1000Base-T ports and 1000Base-SX/LX ports allowing users Ordering Information
to integrate fiber optic cabling into 10/100/1000Base-T copper C3210-1013
environments. 10/100/1000Base-T (RJ-45) [100 m]
Operating at Layer 2, this converter not only converts copper to fiber, [62.5/125 µm fiber: 220 m/722 ft.]
it also does Rate conversion, converting 10/100/1000Base-T copper to [50/125 µm fiber: 550 m/1804 ft.]
1000Base fiber. Link Budget: 8.5 dB
C3210-1039
Applications include: integrate fiber into copper based networking 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
C3210-1040 environments and bridging legacy 10/100 devices into a Gigabit to 1000Base-SX 850nm multimode (LC)
Backbone. via SFP
[62.5/125 μm fiber: 220 m/722 ft.]
[50/125 μm fiber: 550 m/1804 ft.]
Features Specifications Link Budget: 8.0 dB
• Copper and Fiber Auto-Negotiation 10/100/1000Base-T (RJ-45) [100 m]
IEEE 802.3ab
IEEE 802.3u to 1000Base-SX 1310nm extended multimode
• Switch Selectable Speeds
IEEE 802.3z [62.5/125 μm fiber only] (SC) [2 km/1.2 mi.]
• Auto-MDI/MDIX IEEE 802.3p Link Budget: 7.0 dB
IEEE 802.3q
C3210-1014
• Link Pass Through Data Rate 10/100/1000 Mbps; Layer 2 10/100/1000Base-T (RJ-45) [100 m]
Max Frame Size 10,240 Bytes (jumbo frame support) to 1000Base-LX 1310nm single mode (SC)
• Remote Fault Detect [10 km/6.2 mi.] Link Budget: 10.5 dB
1,632 Bytes when linked to an xGFEB10xx-120
• Pause Switches SW1: TP Auto-Negotiation C3210-1040
SW2: TP Speed 10/100/1000Base-T (RJ-45) [100 m]
• Automatic Link Restoration SW3: TP Duplex to 1000Base-X SFP Slot (empty)
SW4: Link Pass Through
• IEEE 802.1P QoS, IPv4 TOS/DiffServ,
IPv6 traffic class
SW5: Fiber Duplex
SW6: Unused
Jumpers Hardware/Software mode, Auto-MDI/MDIX C3210-1029-A1
• IEEE 802.1q Port VLAN, tagging and 10/100/1000Base-T (RJ-45) [100 m]
doubling tagging (Q in Q) Status LEDs PWR (Power): ON = Connection to powered to 1000Base-LX 1310nm TX/1550nm RX
backplane single fiber single mode (SC) [20 km/12.4 mi.]
• Field Upgradeable Firmware LACT (Fiber Link): ON=Fiber link, Blinking=activity Link Budget: 13.0 dB
UTP Duplex/Link: Orange=half duplex link,
• Virtual Cable Test on UTP port Blinking = half duplex activity, Green = Full duplex link, C3210-1029-A2
Blinking =Full duplex activity, 10/100/1000Base-T (RJ-45) [100 m]
• Uni-directional data transmission Off = 10 Mbps operation (or no link), to 1000Base-LX 1550nm TX/1310nm RX
Orange = 100 Mbps operation, Green = 1000 Mbps operation single fiber single mode (SC) [20 km/12.4 mi.]
• Bandwidth Allocation Link Budget: 13.0 dB
• DMI, digital diagnostics per SFF-8472 Depth: 6.5” [165 mm]
• RMON counters for each port Power Consumption 3.6 Watts, 300mA @ 12 VDC
• Can be used in any ION Platform Environment specs are dependent on the chassis chosen
Environment
Chassis Operating: 0°C to 50°C
• Secure uni-directional transmission Altitude: 0 – 10,000 ft.
• Standards based, will link with any
standard 10/100/1000Base-T and any Compliance CISPR/EN55022 Class A, EN55024, EN61000,
FCC Class A, CE Mark
standard 1000Base-SX or -LX ports
Warranty Lifetime

C3220 Series
ION Gigabit Ethernet Remotely Managed NID Module
10/100/1000Base-T to 1000Base-X with OAM/IP-Based Management
The ION 3220 Series of Network Interface Devices (NIDs) are a

remotely managed product that offers IP or IP-Less management Ordering Information
methods for secure delivery of Ethernet services for business and C3220-1013
mobile backhaul applications. With MEF 9, 14 and 21 certification the 10/100/1000Base-T (RJ-45) [100 m]
ION 3220 Series ensures you are compliant with the latest standards. to 1000Base-SX 850nm multimode (SC)
[62.5/125 µm fiber: 220 m/722 ft.] [50/125
The ION 3220 Series is a 10/100/1000Mbps product with advanced µm fiber: 550 m/1804 ft.] Link Budget: 8.5 dB
features including – IEEE 802.3ah Link OAM, VLAN, QoS, SSH/SSL,
C3220-1014
jumbo frame support and bandwidth allocation. 10/100/1000Base-T (RJ-45) [100 m]
C3220-1040
Applications include: Ethernet in the First Mile (EFM), Fiber to the Premises to 1000Base-LX 1310nm single mode (SC)
(FTTP), E-Line Services (EPL & EVPL), and Enterprise Markets. [10 km/6.2 mi.] Link Budget: 10.5 dB
Features *C3220-1040
10/100/1000Base-T (RJ-45) [100 m]
• MEF 9, 14 and 21 certified Specifications to (1) 100/1000Base-X SFP Slot (empty)
Standards IEEE 802.3 *C3221-1040

• 802.3ah Link OAM 10/100/1000Base-T (RJ-45) [100 m]
IEEE 802.3ah
• 10K Jumbo Frame Support IEEE 802.1P to (2) 100/1000Base-X SFP Slots (empty)
IEEE 802.1Q
• Two selectable Remote Management IEEE 802.1X Note: all units feature USB port for local
modes: management application.
Data Rate Copper: 10/100/1000 Mbps
-- IP-Based Remote Management Fiber: 1000 Mbps
-- In-Band (remote device managed by Filtering Addresses 8K MAC Addresses *S3220-1040 and S3221-1040 have SGMII
local peer) support for use with 10/100/1000Base-T
Max Frame Size 10,240 bytes copper SFPs.
• Auto-MDI/MDIX Dimensions Width: 0.86” [22 mm]
• Auto-Negotiation Depth: 6.5” [165 mm]
Height: 3.4” [86 mm] Optional Accessories (sold separately)
• Pause Power Consumption 4.5 Watts SFP Modules
• Transparent Link Pass Through Environment specs are dependent on the chassis chosen
Environment USB Cables
• Far-End-Fault (FEF) Humidity: 5% to 95% (non-condensing)
• Remote Loopback
Compliance EN55022 class A, EN55024, CE Mark
• IEEE 802.1p QoS packet classification Warranty Lifetime
• IPv4 IP TOS, DiffServ and IPv6 traffic
class QoS classification
• IEEE 802.1q VLAN and double VLAN
• DHCP client
• SNTP
• TFTP
• RADIUS client
• Cable diagnostic function for copper
ports
• SSH
• Telnet
• Web management
• Focal Point Management
• Management VLAN

C3230 Series
ION Gigabit Ethernet Remotely Managed NID Module
The ION 3230 Series of Network Interface Devices (NIDs) are multi-
service NIDs that provide SLA-assurance and advance fault management Ordering Information
that is compliant with MEF and IEEE standards. The ION 3230 Series is *C3230-1040
designed for business Ethernet and mobile backhaul deployments. The 10/100/1000Base-T (RJ-45) [100 m] to
ION S3230 Series are MEF 9, 14 and 21 certified. The ION 3230 Series (1) 100/1000Base-X SFP Slot (empty)
C3230-1040 is a 10/100/1000Mbps product with advanced features including – IEEE *C3231-1040
802.1ag Service OAM, IEEE 802.3ah Link OAM, ITU Y.1731 Performance 10/100/1000Base-T (RJ-45) [100 m] to
(2) 100/1000Base-X SFP Slots (empty)
Monitoring, VLAN, QoS, SSH/SSL, jumbo frame support and bandwidth
allocation.
Note: all units feature USB port for local
Features Applications include: Ethernet in the First Mile (EFM), Fiber to the
Premises (FTTP), E-Line Services (EPL & EVPL), and Enterprise Markets.
management application.
• MEF 9, 14 and 21 certified

*C3230-1040 and C3231-1040 have SGMII
• 802.3ah Link OAM
Specifications support for use with 10/100/1000Base-T
copper SFPs.
• ITU Y.1731 Standards IEEE 802.3
• 802.1ag Service OAM IEEE 802.3ah
IEEE 802.1P Optional Accessories (sold separately)
• 10K Jumbo Frame Support IEEE 802.1Q
SFP Modules
• Two selectable Remote Management modes: Data Rate Copper: 10/100/1000 Mbps
Fiber: 1000 Mbps
-- IP-Based Remote Management
Filtering Address 8K MAC Addresses
-- In-Band (remote device managed
Max Frame Size 10,240 bytes
by local peer)
• Auto-MDI/MDIX Depth: 6.5” [165 mm]
Height: 1" [25 mm]
Power Input 100-240 VAC,1A
• Pause
Power Output 12 VDC, 1.25A
Environment
• Far-End-Fault (FEF) Operating: 0°C to 50°C
• Remote Loopback Altitude: 0 – 10,000 ft.
• Field Upgradeable Firmware Weight 2 lbs. [0.90 kg]
Compliance EN55022 Class A, EN55024, UL60950,CE Mark
• IEEE 802.1p QoS packet classification
Warranty Lifetime
• DHCP client
• SNTP
• TFTP
• RADIUS client
• Cable diagnostic function for copper ports
• SSH
• Telnet
• Web management
• Management VLAN

C4110 Series
ION Fiber to Fiber Media Converter Module
SFP+ to SFP+ for Data Rates from 1Gbps to 11.5 Gbps
The C4110 is a 10Gbps protocol independent media converter with

two pluggable SFP+ ports. Each port can support data rates from Ordering Information
1Gbps up to 11.5Gbps allowing network designers to customize the C4110-4848
C4110 with a pair of SFP modules from Transition Networks’ wide SFP 1 Gbps to 11.5Gbps fiber repeater with two
product offering, to meet their network requirements. The C4110 can open SFP+ slots, any rate to same rate ION
slide-in card media converter
be used as an any-rate to similar-rate fiber mode converter, as well as
a WDM transponder. Management of the card is available through the Optional Accessories (sold separately)
IONMM when installed in an ION Chassis. SFP or SFP+ Modules
C4110-4848
Standards IEEE 802.3ae
• ION chassis Card ITU.G.709
SFF8431
• Fiber to fiber repeater Multi-sourcing Agreement (MSA)
• Remotely Managed when installed in a
Managed ION Chassis TDM Port (T1) PWR: On = Power
Port 1 Link/Act: On = Link, Flashing = Network Traffic
• Supports data rates from 1Gbps to Port 2 Link/Act: On = Link, Flashing = Network Traffic
11.5Gbps Data Rate Protocol Independent, 1Gbps to 11.5Gbps
Dip Switches Only 4 of the 8 Dip Switches are used to select the
• Support Any-rate to Same-rate operational data rate, see the user guide for the
supported dip switch configurations
• Protocol Transparent supports:
-- Ethernet: 10Gig LAN, 10Gig Wan, 1Gig Depth: 6.5” [165 mm]
LAN Height: 3.4” [86 mm]
-- Fiber Channel: 10, 8, 4, 2, 1Gig Power Consumption 4.2 Watts
-- SONET/SDN OC-192, OC-48 Environment specs are dependent on the chassis chosen
Environment
• SFP to SFP or SFP+ to SFP+ Humidity: 5% to 95% (non-condensing)
• Provides conversion between different
types of fiber
MTBF Greater than 250,000 hours (MIL-HDBK-217F)
• Supported transmission distance based Greater than 687,000 hours (Bellcore)
on the SFP modules and type of fiber Compliance FCC Class A, CE Mark, EN55022 Class A, EN55024
used
Warranty Lifetime
• Supports 3R (Reamplify, Reshape, and
Retime) signal regeneration
• No frame size limitations
• Use as a fiber mode converter
• Use as a specific wavelength CWDM

Transponder
• Also available as a stand-alone converter

C4120 Series
ION 10 Gigabit Ethernet Media Converter Module
10GBase-T Copper to Fiber
The C4120 is a 10 Gigabit Ethernet copper to fiber media converter. It

offers conversion technology by providing one 10GBase-T RJ-45 port Ordering Information
and one pluggable 10GBase-X fiber SFP+ port. The open SFP+ port C4120-1048
supports a wide variety of Transition Networks 10G SFP+ fiber modules, 10GBase-T RJ-45 100m
as well as third party MSA compatible SFP+ modules. to 10GBase-X SFP+ Slot (Empty)
The C4120 provides several 10G Ethernet enterprise and data center Optional Accessories (sold separately)
connectivity solutions. Since most 10G Ethernet switches support SFP+ Modules
C4120-1048 a combination of copper RJ-45 and open SFP+ ports, the C4120 Supports any SFP+ 10G Modules
allows users to convert either of these ports to the media type of their
preference to match their network requirements, including direct
attached copper SFP+ cables.
The slide-in card C4120 is a managed device when installed in a
Managed ION Chassis.
• Transparent Link Pass Through
IEEE 802.3an
• Auto-Negotiation IEEE 802.3ae
IEEE 802.3az
• Auto-MDI/MDIX Data Rate 10 Gbps
• Automatic Link Restoration Dip Switches SW1: Copper Loopback

SW2: Fiber Loopback
• Loopback on Fiber and Copper SW3: not used
SW4: Transparent Link Pass Through
• DMI Status LEDs PWR (Power): On = power is on
L/A SFP+ (Fiber port link and activity statue):
• For use in the ION 19-Slot or 6-Slot On = Link OK
Chassis Flashing = Link and Activity OK
Copper Link (Copper Link Status):
• Manageable when installed in a On = Link OK
managed ION Chassis Copper Act (Copper Link Activity):
On = Activity OK
• Remote Firmware Upgrade
Dimensions Width: 0.86” [21.85 mm]
Fiber Port supported standards Depth: 6.5” [165 mm]
-- 10GBase-SR Height: 3.4” [86.36 mm]
-- 10GBase-LRM Power Consumption 10.5 Watts
-- 10GBase-LR See product manual for chassis power guidelines
-- 10GBase-ER Environment specs are dependent on the chassis chosen
Environment
-- 10GBase-ZR
• The open SFP+ port also supports: Altitude: 0 – 10,000 ft.
-- Direct attached 10G copper cable
assemblies MTBF Greater than 250,000 hours (MIL-HDBK-217F)
-- Both Class-I and Class-II fiber
-- SFP+ modules
Warranty Lifetime
-- SFP modules supporting
WDM technology
• Support 100m on Cat6a or higher UTP
• Per Energy Efficient Ethernet
standards, IEEE 802.3az, UTP cable
length is detected and power is
adjusted according, to reduce power
consumption on shorter UTP
cable installs

C6010 Series
ION T1/E1 Network Interface Device Module
T1/E1 over Fiber
The T1/E1 copper to fiber network interface device (NID) provides a

solution for those users that need to extend T1/E1 or PRI connections Ordering Information
over fiber. C6010-1011
The T1/E1 supports Small Form Pluggable (SFP) transceivers to Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1300nm multimode (ST) [2 km/1.2 mi.]
support a variety of fiber types, distances and wavelengths to provide Link Budget: 11.0 dB
maximum flexibility across a variety of network topologies. The use
C6010-1013
of Coarse Wave Division Multiplexing (CWDM) SFPs can be utilized to Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
further increase the bandwidth capacity of the fiber infrastructure. to 1300nm multimode (SC) [2 km/1.2 mi.]
C6010-1040 The T1/E1 NID must be used in pairs. A typical installation will include
C6010-1014
a chassis card installed in the ION Platform locally and a stand-alone Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
device installed at the remote location. to 1310nm single mode (SC)
Features Specifications C6010-1040

Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
Standards ANSI T1.102 *to SFP slot (empty)
• Remote in-band management
T1.402
T1.408 C6010-3040
• Local or Remote Loopbacks - Copper
ITU I.431 (2) Coax (BNC) *to SFP slot (empty)
or Fiber G.703
G.736
• Switch selectable for T1 or E1 G.775 Single Fiber Products
G.823
• Remote firmware upgrade Recommended use in pairs
ETSI 300-166
ETSI 300-233
• LEDs for immediate visual status C6010-1029-A1
TBR12/12
• Supports dual or single fiber Copper Connectors RJ-48, BNC to 1310nm TX /1550nm RX single fiber single
mode (SC) [20 km/12.4 mi.]
• Supports multimode and single mode Fiber Connectors SFP: LC connector Uses standard 100Base-X/OC-3
SFP Fixed Optics: ST or SC connector
fiber at a variety of distances
Data Rates T1 = 1.544 Mbit/s, E1 = 2.048 Mbit/s C6010-1029-A2
• Supports CWDM SFPs Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
Status LEDs Power, Signal Detect Copper, Signal Detect Fiber to 1550nm TX /1310nm RX single fiber single
• SNMP management when used with ION Dimensions Width: 0.86” [22 mm] mode (SC) [20 km/12.4 mi.]
Depth: 6.5” [165 mm] Link Budget: 19.0 dB
chassis and management module
• Remote stand-alone can be managed Power Consumption 2.6 Watts *SFP port uses standard 100Base-x/oc-3 SFP
by local peer
Environment
• Extend PRI over fiber Operating: 0°C to 50°C
MTBF Greater than 250,000 hours (MIL-HDBD-217F)
Compliance CISPR/EN55022 Class A, FCC Class A, CE Mark
Warranty Lifetime

C6110 Series
ION T1/E1/J1 Network Interface Device Module
4 x T1/E1/J1 over Fiber
The ION 4 x T1/E1/J1 copper to fiber network interface device (NID)
provides a solution for those users that need to extend multiple T1/E1/ Ordering Information
J1 connections over fiber. C6110-1011
The ION 4 x T1/E1/J1 supports Small Form Pluggable (SFP) 1300nm multimode (ST) [2 km/1.2 mi.]
transceivers to support a variety of fiber types, distances and to (4) RJ-48 [1.5 km/0.9 mi.]
wavelengths to provide maximum flexibility across a variety of network
C6110-1013
topologies. 1300nm multimode (SC) [2 km/1.2 mi.]
The use of Coarse Wave Division Multiplexing (CWDM) SFPs can to (4) RJ-48 [1.5 km/0.9 mi.]
be utilized to further increase the bandwidth capacity of the fiber
C6110-1014
infrastructure. 1310nm single mode (SC) [20 km/12.4 mi.]
The ION 4 x T1/E1/J1 NID must be used in pairs. A typical installation to (4) RJ-48 [1.5 km/0.9 mi.]
will include a chassis card installed in the ION Platform locally and a
C6110-1040
stand-alone device installed at the remote location. *1 SFP port (Empty)
Applications include: T1/E1/J1 extension over fiber, Mobile backhaul, to (4) RJ-48 [1.5 km/0.9 mi.]
and Business customers. C6111-1040

*2 SFP ports (Empty)
to (4) RJ-48 [1.5 km/0.9 mi.]
Standards ANSI T1.102 Single Fiber Products
• (4) RJ-48 copper interfaces
T1.403 Recommended use in pairs
• (1) fiber interface (fixed or SFP) T1.408
ITU I.431 C6110-1029-A1
(2) SFP ports on C6111-1040 model G.703 1310nm TX/1550nm RX single fiber
G.736 single mode (SC) [20 km/12.4 mi.]
• Loopback via test set G.775 Link Budget: 19.0 dB
G.823 to (4) RJ-48 [1.5 km/0.9 mi.]
• Local and remote loopbacks ETSI 300-166
ETSI 300-233 C6110-1029-A2
• LEDs for device status and 1550nm TX/1310nm RX single fiber
TBR 12/13
troubleshooting AT&T Pub 62411 single mode (SC) [20 km/12.4 mi.]
• Settings for line code, line build out, Data Rate Copper ports (RJ-48): T1(J1) = 1.544Mb/s, to (4) RJ-48 [1.5 km/0.9 mi.]
loopbacks and Alarm Indication Signal E1 = 2.048Mb/s
SFP port(s) (empty): 100Base-X/OC-3
(AIS)
Switches Numerous switch settings for line coding, line build *SFP port uses standard 100Base-x/oc-3 SFP
• Access to complete status and out, loopback and AIS
configuration on local and remote device Status LEDs Power, Port Status, Loopback and AIS
• Remote firmware upgrade Dimensions Width: 1.72” [44 mm]
Depth: 6.5” [165 mm]
• Remote management Height: 3.4” [86 mm]
Power Consumption 6 Watts (max: dual fiber model)
5.5 Watts (max: single fiber model)
Environment
Compliance EN55022 Class A, EN55024, CE mark
Warranty Lifetime

C6120 Series
ION T1/E1/J1 Network Interface Device Module
4 x T1/E1/J1 + 10/100 Ethernet over Fiber
J1 connections and 10/100Mbps Ethernet over fiber. C6120-1011
wavelengths to provide maximum flexibility across a variety of network plus 10/100Base-TX (RJ-45) [100m]
topologies. The use of Coarse Wave Division Multiplexing (CWDM) C6120-1013
SFPs can be utilized to further increase the bandwidth capacity of the 1300nm multimode (SC) [2 km/1.2 mi.]
fiber infrastructure. Link Budget: 11.0 dB
to (4) RJ-48 [1.5 km/0.9 mi.]
C6120-1013 The ION 4 x T1/E1/J1 NID must be used in pairs. A typical installation plus 10/100Base-TX (RJ-45) [100m]
will include a chassis card installed in the ION Platform locally and a C6120-1014
stand-alone device installed at the remote location. 1310nm single mode (SC) [20 km/12.4 mi.]
Applications include: T1/E1/J1 extension over fiber, mobile backhaul, to (4) RJ-48 [1.5 km/0.9 mi.]
plus 10/100Base-TX (RJ-45) [100m]
and business customers.
C6120-1040
*1 SFP port (Empty)
to (4) RJ-48 [1.5 km/0.9 mi.]
Features Specifications plus 10/100Base-TX (RJ-45) [100m]
Standards ANSI T1.102 C6121-1040

• (4) RJ-48 copper interfaces *2 SFP ports (Empty)
T1.403
T1.408 to (4) RJ-48 [1.5 km/0.9 mi.]
• (1) fiber interface (fixed or SFP) plus 10/100Base-TX (RJ-45) [100m]
ITU I.431
• (2) SFP ports on C6121-1040 model G.703
G.736
• (1) RJ-45 10/100Mbps Ethernet port G.775 Single Fiber Products
G.823
C6120-1029-A1
• Auto-MDI/MDIX ETSI 300-166
1310nm TX/1550nm RX single fiber single
ETSI 300-233
mode (SC) [20 km/12.4 mi.] LB: 19.0 dB
• Pause (Flow Control on Ethernet port) TBR 12/13
to (4) RJ-48 [1.5 km/0.9 mi.]
AT&T Pub 62411
plus 10/100Base-TX (RJ-45) [100m]
• Loopback via test set IEEE 802.3™-2008
Data Rate Copper ports (RJ-48): T1(J1) = 1.544Mb/s, C6120-1029-A2
• Local and remote loopbacks E1 = 2.048Mb/s 1550nm TX/1310nm RX single fiber single
Ethernet port (RJ-45): 10/100Mbps mode (SC) [20 km/12.4 mi.] LB: 19.0 dB
• LEDs for device status and SFP port(s) (empty): 100Base-X/OC-3 to (4) RJ-48 [1.5 km/0.9 mi.]
troubleshooting plus 10/100Base-TX (RJ-45) [100m]
Switches Numerous switch settings for line coding, line
• Settings for line code, line build out, build out, loopback and AIS
loopbacks and Alarm Indication Signal Status LEDs Power, Port Status, Loopback and AIS *SFP port uses standard 100Base-x/oc-3 SFP
(AIS) Dimensions Width: 1.72” [44 mm]
Depth: 6.5” [165 mm]
• Access to complete status and Height: 3.4” [86 mm]
configuration on local and remote
device Power Consumption 6 Watts (max: dual fiber model)
5.5 Watts (max: single fiber model)
• Remote firmware upgrade Environment specs are dependent on the chassis chosen
Environment
• Remote management Humidity: 5% to 95% (non-condensing)
Compliance EN55022 Class A, EN55024, CE mark
Warranty Lifetime

C6210 Series
ION DS3-T3/E3 Network Interface Device Module
DS3 – T3/E3 Coax over Fiber
The DS3 – T3/E3 copper to fiber network interface device (NID)

provides a solution for those users that need to extend DS3 Ordering Information
connections over fiber. C6210-3011
The DS3 – T3/E3s supports Small Form Pluggable (SFP) transceivers to (2) Coax (BNC) to 1300nm multimode (ST)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
support a variety of fiber types, distances and wavelengths to provide
maximum flexibility across a variety of network topologies. The use C6210-3013
(2) Coax (BNC) to 1300nm multimode (SC)
of Coarse Wave Division Multiplexing (CWDM) SFPs can be utilized to [2 km/ 1.2 mi.] Link Budget: 11.0 dB
further increase the bandwidth capacity of the fiber infrastructure. C6210-3014
C6210-3040
The DS3 – T3/E3 NID must be used in pairs. A typical installation will (2) Coax (BNC) to 1310nm single mode (SC)
include a chassis card installed in the ION Platform locally and a stand-
alone device installed at the remote location. C6210-3040
(2) Coax (BNC) to *SFP slot (empty)
Features Specifications Single Fiber Products

Standards ANSI
• AIS (Alarm Indication Signal) C6210-3029-A1
ITU-TS
ETSI (2) Coax (BNC) to 1310nm TX/1550nm
• Coax Line Build Out RX single fiber single mode (SC)
G.823 for jitter tolerance
G.755 for loss of signal [20 km/12.4 mi.] Link Budget: 19.0 dB
• Switch selectable for DS3/T3 or E3
Coax Connectors 75 ohm coax C6210-3029-A2
• Remote firmware upgrade (2) Coax (BNC) to 1550nm TX/1310nm
Fiber Connectors SFP: LC connector Uses standard 100Base-X/OC-3 RX single fiber single mode (SC)
• Loopback – Coax and Fiber SFP Fixed Optics: ST or SC connector [20 km/12.4 mi.] Link Budget: 19.0 dB
Data Rates DS3/T3 = 44.7Mbps; E3 = 34.4Mbps
• LEDs for immediate visual status *SFP port uses standard 100Base-x/oc-3 SFP
Status LEDs Power, Coax link status, coax loopback status, AIS
• Supports dual or single fiber on coax link; Fiber link status, fiber loopback
status, AIS on fiber link
• Supports multimode and single mode Dimensions Width: 0.86” [22 mm]
fiber at a variety of distances Depth: 6.5” [165 mm]
• Supports CWDM SFPs
• SNMP management when used with Environment specs are dependent on the chassis chosen
Environment
ION chassis and management module Operating: 0°C to 50°C
• Remote stand-alone can be managed Altitude: 0 – 10,000 ft.
by local peer Weight 1 lb. [0.45 kg]
MTBF Greater than 250,000 hours (MIL-HDBD-217F)
Compliance CISPR/EN55022 Class A, FCC Class A, CE Mark
Warranty Lifetime

The IONADP allows the installation of Point System Converter Cards
and Network Management Modules in the ION Platform
• Provides a migration path from Point System to the ION Platform
• Leverages Point Systems long history of high quality and reliable products
• Connects Legacy Network Equipment, easing network upgrades to future technologies
• Only one management application is needed to manage both ION and Point System modules
Using the IONADP
• The ION Platform offers backwards compatibility with Point System™

• Allows redeployment of existing Point System™ cards in the ION chassis
• ION cards and Point System™ cards co-exist in the ION chassis allowing:
- The ION management module will manage the ION cards
- The Point System™ management module will manage the
Point System™ cards
• Future proof the network and reducing CAPEX while supporting legacy systems IONADP CPSMM-120
The follow pages include some of the Point System cards that could be used in the ION chassis. For
availability of other Point System slide-in modules, contact your Transition Networks representative.

IONADP
The ION Adapter
Use to Mount Point System™ Converter Modules in an ION Chassis
The IONADP is an adapter card that allows the ION Platform chassis
to be backwards compatible with Point System™ modules. This Ordering Information
adapter is designed to sit between a Point System™ module and IONADP
the backplane of the ION chassis. The purpose of the IONADP is to Point System™ Adapter for the ION chassis,
lengthen the Point System™ module so it can be securely mounted in includes bracket and screws
an ION chassis while also connecting to the backplane allowing the ION
chassis to power the Point System™ module.
SNMP management of the Point System™ modules installed in the ION
chassis is possible by using a Point System™ management module
IONADP
along with IONADP. The ION modules and the Point System™ modules
are managed independently by their own respective management
modules. The ION management module and the Point System™
management module would each require a unique IP address assigned
to them, while Focal Point can be used to access the management
information from each management module simultaneously.
• Ease the migration from Point System™
Depth: 1.25” [31.75 mm]
to the ION Platform Height: 2.9” [73.66 mm]
• Deploy the Point System™ cards in the Environment specs are dependent on the chassis chosen
Environment
ION chassis Operating: 0°C to 50°C
• Lengthens a Point System™ card to Altitude: 0 – 10,000 ft.
match the size of the ION card Weight 0.5 lbs. [0.22 kg]
• Can be used with any Point System™ Warranty Lifetime

card
• Manage Point System™ cards in the
ION chassis
• IONADP kit includes adapter card,
bracket, and four screws

CPSMM-xxx
Point System™ Management Module
The CPSMM-120 is a Point System™ management module which

can be installed in the ION 19-Slot chassis via the IONADP. This Ordering Information
management module can be used to gain management access to any CPSMM-120
Point System™ converter cards installed in the same ION chassis. Single Slot Master Management Module
It occupies a single slot and fully supports all management features CPSMM-200
found in the Point System™ modules. Dual Slot Master Management Module
CPSMM-120
The CPSMM-200 should be used when the user intends to manage CPSMM-210
Single Slot Expansion Management Module
multiple stacked chassis (up to 8 chassis per stack) via a single IP or Used in conjunction with CPSMM-200
if the application requires an FCC/CISPR Class B rating. This device
occupies two slots in a Point System™ chassis and will also fully
support all management features. The CPSMM-200 has a DB-9 serial
interface as well as a 10Base-T interface similar to the CPSMM-120.
CPSMM-200
However, it also includes two additional RJ-45 ports ("in" and "out")
to accommodate stacking of multiple Point System™ Chassis’. The
CPSMM-200 also differs from the CPSMM-120 in that it is FCC/CISPR
Class B rated.
The CPSMM-210, when used in conjunction with the CPSMM-200
management module, allows the user to manage up to eight Point
System™ chassis together in a "virtual cabinet". This brings the
total number of cards managed by a single IP to 143. The CPSMM-
210 has two RJ-45 ports ("in" and "out") used for stacking multiple
CPSMM-210 Point System™ chassis. The CPSMM-210 incorporates a self-healing
bus so that the failure of any one module will not effect remaining
modules in the stack. The CPSMM-210 should be used when the
user has a requirement to stack multiple chassis.
Ports CPSMM-120: (1) DB-9, (1) RJ-45
• DB-9 serial interface for CLI (command
CPSMM-200: (1) DB-9, (1) RJ-45
line interface) CPSMM-210: (2) RJ-45
• RJ-45 port provides a 10Base-T LEDs CPSMM-120: Power, Link, TX, RX
network management interface CPSMM-200: Power, Link, TX, RX
CPSMM-210: Power, Link
• Included Power and Link Status LEDs Dimensions CPSMM-120: Width: 0.86” [22 mm]
Depth: 5" [127 mm]
• Allow Point System™ modules to be Height: 3.4” [86 mm]
managed when installed in an ION CPSMM-200: Width: 2" [51 mm]
Chassis Depth: 5" [127 mm]
• Management Tree View displays both CPSMM-210: Width: 0.86” [22 mm]
ION cards and Point System™ cards Depth: 5" [127 mm]
• Management Access Methods Environment: Operating: 0°C to 50°C
• Transition Networks' Focal Point GUI Altitude: 0 – 10,000 ft.
Application
Weight CPSMM-120: 1 lb. [0.45 kg]
• Web-based interface CPSMM-200: 2 lbs. [0.90 kg]
CPSMM-210: 1 lb. [0.45 kg]
• Command Line Interface via Console Compliance CPSMM-120: FCC & CISPR Class A, CE Mark
Port or Telnet CPSMM-200: FCC & CISPR Class B, CE Mark
CPSMM-210: FCC & CISPR Class B, CE Mark
• Focal Point can discover both ION and
Warranty Lifetime
Point System™ management modules

CETTF10xx-x0x
Point System™ Ethernet Media Converter Module
10Base-T to 10Base-FL
Extend Network Distance:

Two 10Base-T to 10Base-FL Media Converters used back-to-back Ordering Information
extend the distance between two 10Base-T devices up to 5 km (3.1 CETTF1011-105
mi.) using multimode fiber, up to 40 km (24.9 mi.) using single mode 10Base-T (RJ-45) [100 m/328 ft.]
fiber without a repeater. to 10Base-FL 850nm multimode (ST)
Connect Unlike Devices:
CETTF1013-105
Connect your workgroup to a distant server or a central switch; or 10Base-T (RJ-45) [100 m/328 ft.]
extend distances between like and unlike devices in either full or half- to 10Base-FL 850nm multimode (SC)
duplex modes. [2 km/1.2 mi.] Link Budget: 13.5 dB
CETTF1013-105
CETTF1014-105
10Base-T (RJ-45) [100 m/328 ft.]
to 10Base-FL 1310nm single mode (SC)
• Can be used with any Point System™ Standards IEEE 802.3
Chassis 4-position Switch Fiber Port: Enables/disables network traffic on the Recommended use in pairs
fiber port; (Up = enabled)
• Auto-MDI/MDIX Copper Port: Enables/disables network traffic on CETTF1029-105
the copper port; (Up = enabled) 10Base-T (RJ-45) [100 m/328 ft.]
• Link Pass Through Auto-MDI/MDIX: Enables/disables Auto-MDI/MDIX to 10Base-FL 1310nm TX/1550nm RX single
function; (Up = enabled) fiber single mode (SC) [20 km/12.4 mi.]
• Automatic Link Restoration Link Pass Through: Enables/disables Link Pass Link Budget: 19.0 dB
Through function; (Up = enabled) CETTF1029-106
• Field Upgradeable Firmware 10Base-T (RJ-45) [100 m/328 ft.]
3-position Jumper Hardware: Converter mode is determined by
4-position switch settings to 10Base-FL 1550nm TX/1310nm RX
• Integrate mixed cabling environments single fiber single mode (SC [20 km/12.4 mi.]
Software: Converter mode is determined by most
in either switched or shared Ethernet recently saved on-board microprocessor setting Link Budget: 19.0 dB
networks.
Status LEDs PWR (Power): On for normal operation;
• Connect legacy 10Base-T devices to a LKF (Link Fiber): Steady LED indicates good fiber link and
normal operation;
fiber based cabling infrastructure.
RXF (Receive Fiber): Flashing LED indicates data reception
on fiber link;
LKC (Link Copper): Steady LED indicates good copper link
and normal operation;
RXC (Receive Copper): Flashing LED indicates data
reception on copper link
Depth: 5" [127 mm]
Environment
Compliance EN55022, EN55024, EN61000, CE Mark, Class A
Warranty Lifetime

CSEFE10xx-10x
Point System™ Speed Selectable Media Converter Module
10Base-T to 10Base-FL or 100Base-TX to 100Base-FX
Transition Networks’ speed selectable copper to fiber Media Converter

allows you to extend the distance between copper based connections Ordering Information
with the use of fiber optic cable. The ability to select the speed of CSEFE1014-100
converter allows for easy migration from a 10 Mbps network today to a 10Base-T or 100Base-TX (RJ-45)
100 Mbps network in the future. This converter is a true Layer 1 device [100 m/328 ft.]
to 10Base-FL or 100Base-FX
as both the copper and fiber ports operate at the same speed setting 1310nm single mode (SC) [20 km/12.4 mi.]
(i.e. 100Base-T to 100Base-FX). For 10 Mbps applications, these Link Budget: 17.0 dB
devices must be used in pairs.
CSEFE1014-100
• Auto-MDI/MDIX
Switches Switch 1: Link Pass Through on/off
• Automatic Link Restoration Switch 2: 10 Mbps or 100 Mbps operation
3-position Jumper Hardware: Converter mode is determined by Dip switch settings
Software: Converter mode is determined by most recently
• Supports single mode fiber saved on-board microprocessor settings
Status LEDs PWR (Power): Lit for normal operation
• Report local converter status to chassis: F-ACT (Fiber Activity): Blinking = data reception on the fiber link
-- Copper/fiber link status F-100 (Fiber Speed): ON = link at 100 Mbps
F-10 (Fiber Speed): ON = link at 10 Mbps
-- Hardware/Software mode C-ACT (Copper Activity): Blinking = data reception on the
-- 10 Mbps or 100 Mbps speed setting copper link
-- Link Pass Through on/off setting C-100 (Copper Speed): ON = link at 100 Mbps
C-10 (Copper Speed): ON = link at 10 Mbps
• Write operation includes: Dimensions Width: 0.86” [22 mm]
Depth: 5" [127 mm]
-- Enable/disable Link Pass Through Height: 3.4” [86 mm]
-- Set speed to 10 Mb or 100 Mb Power Consumption 3.6 Watts
-- Can be used with any Point System™ Environment specs are dependent on the chassis chosen
Environment
Chassis Humidity: 5% to 95% (non-condensing)
Compliance CISPR/EN55022 Class B, EN55024, EN60950 Class B,
FCC Class B, CE Mark
Warranty Lifetime

CSETF101x-205
Point System™ Fast Ethernet Media Converter Module
10/100Base-TX to 10/100Base-SX
Used in pairs, this media converter can extend distances between

two twisted pair switches or a switch and a server up to 300m over Ordering Information
multimode fiber (100Base-SX). CSETF1011-205
Applications include: lowest possible cost solution for fiber installation 10/100Base-TX (RJ-45) [60 m/197 ft.]
to 10/100Base-SX 850nm multimode (ST)
up to 300m (100Base-SX), 10/100 on fiber is possible with [300 m/984 ft.]
10/100Base-SX, ideal for building backbone and horizontal cabling
CSETF1013-205
applications where cost and 10/100 Auto-Negotiation are critical. 10/100Base-TX (RJ-45) [60 m/197 ft.]
to 10/100Base-SX 850nm multimode (SC)
[300 m/984 ft.]
CSETF1011-205
Status LEDs PWR (Power)
• Auto-MDI/MDIX SX-ACT (Fiber Activity)
SX-100 (Fiber Speed)
• Link Pass Through SX-10 (Fiber Speed)
TX-ACT (Copper Activity)
• Automatic Link Restoration TX-100 (Copper Speed)
TX-10 (Copper Speed)
• Can be used with any Point System™ Depth: 5" [127 mm]
Chassis
Environment
Compliance CISPR/EN55022 Class A & B, FCC Class A & B, CE Mark
Warranty Lifetime

CBFTF1010-130
Point System™ Fault-Tolerant Redundant Link Protector
10/100Base-TX
The Redundant Link Protector is a 10/100 Ethernet fault-tolerant
transceiver. It significantly reduces network downtime, adding a new Ordering Information
level of redundancy to 10/100 Ethernet connections. It also provides CBFTF1010-130
a redundant path for critical 10/100 devices. In a 10/100 Ethernet 10/100Base-TX Link Protector Transceiver
network, a critical device such as a file server may be connected (3) 10/100Base-TX (RJ-45) [100 m/328 ft.]
to the rest of the network through a hub or a switch. A common
problem in this configuration is that the server is often connected to
the network through a single cable. If the cable fails, then the server
is disconnected from the rest of the network. Similarly, if a port of
a hub or switch to which the server is connected fails, the server is
CBFTF1010-130 disconnected from the network.
The Redundant Transceiver has three ports: one for the critical (main)
device, one for the default (primary) path for the critical device, and
Features another (backup) for the backup path. It is a smart device that will
• Fault-tolerant redundant connections
not send any signal on a path that is not active. If the primary path
loses its link, then the transceiver will switch to the backup path in
• Easy to install and use approximately 189 milliseconds.
• Supports half and full-duplex When the primary path re-establishes its link, the Redundant Link
transmission Protector will automatically switch back to the primary path.
• Auto-MDI/MDIX on all 3 ports Optional functionality, controlled via a dip switch, allows the unit to
• Auto-Negotiation move from the fault-tolerant mode to a 3-port switch mode.
• IEEE 802.3 compliant

Specifications
• 9 diagnostic LEDs Standards IEEE 802.3
• Optional 3-port switch mode RJ-45 Connectors Type: 8-position, RJ-45 receptacle:
1: TX+ 5: NC (no connection)
• Can be used with any Point System™ 2: TX- 6: RX-
Chassis 3: RX+ 7: NC (no connection)
4: NC (no connection) 8: NC (no connection)
Dip Switches SW1: Auto-Negotiation Enable/Disable
Manageable Features SW2: 10/100 Mbps
SW3: Full/Half-Duplex
• Report converter status to chassis SW4: Redundancy/Switch
management software: System LEDs Power (PWR): Indicates the presence of POWER
-- Media Converter Power Primary (PRI): Indicates a link is established on the
Primary port
Backup (BKP): Indicates the link has moved over to
-- Copper Port Speed the Backup port
-- TP and Fiber Port Duplex Port LEDs Lower Right:
-- Fault condition Green indicates 100 Mbps;
Orange indicates 10 Mbps;
• Write operation includes: Flashing indicates Activity
Lower Left:
-- Power on/off device Green indicates full-duplex; Off half-duplex
-- Auto-Negotiation enable/disable Dimensions Width: 0.86” [12 mm]
Depth: 5" [127 mm]
-- Force 10 Mbps or 100 Mbps Height: 3.4” [86 mm]
-- Force half or full-duplex Power Consumption 2.4 Watts
-- Select advertising modes when Environment specs are dependent on the chassis chosen
Environment
Auto-Negotiation is enabled Operating: 0°C to 50°C
-- LPT enable/disable Altitude: 0 – 10,000 ft.
-- FEF enable/disable Weight 1 lb. [0.45 kg]
-- Pause enable/disable Compliance FCC Class A, EN55024, UL 60950, CE Mark

Warranty Lifetime
Note: Management features are available when
the converter is used in a managed Point Sys-
tem™ Chassis

CSRFB10xx-10x
Point System™ Fast Ethernet Remotely Managed
NID Module
10/100Base-TX to 100Base-FX
Ideal for both Enterprise and Service Provider applications where entry
level management information is needed on both the local and the Ordering Information
remote device. This management information is accessible through the CSRFB1011-100
local unit installed in a managed Point System™ Chassis. 10/100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1300nm multimode ST
Devices should be used in pairs with the remotely managed device [2 km/1.2 mi.] Link Budget: 11.0 dB
being another chassis card (CSRFB10xx-100) or stand-alone unit
CSRFB1013-100
(SSRFB10xx-100). 10/100Base-TX (RJ-45) [100 m/328 ft.]
Applications include: integrate fiber into 10/100 copper environments, [2 km/1.2 mi.] Link Budget: 11.0 dB
CSRFB1013-100
Remote Management Local managed unit receives status updated
CSRFB1014-100
from remote unit, Remote Loopback assists in identifying network 10/100Base-TX (RJ-45) [100 m/328 ft.]
problems, and Bandwidth Control Independent ingress rate limiting on to 100Base-FX 1310nm single mode (SC)
both ports. [20 km/12.4 mi.] Link Budget: 16.0 dB
CSRFB1040-100
Features Specifications 10/100Base-TX (RJ-45) [100 m/328 ft.]
to SFP slot (empty)
Data Rate Copper: 10/100 Mbps Fiber: 100 Mbps Single Fiber Products
• Auto-MDI/MDIX Filtering Addresses 1K MAC addresses CSRFB1029-100
• Far-End-Fault (FEF) RAM Buffers 256K 10/100Base-TX (RJ-45) [100 m/328 ft.]
• Transparent Link Pass Through Max Frame Size 1916 bytes untagged Bi-Di single mode (SC) [20 km/12.4 mi.]
1914 bytes tagged Link Budget: 19.0 dB
• Bandwidth Allocation Switches SW1: TP Auto-Negotiation
CSRFB1029-101
SW2: TP Duplex with Auto-Negotiation Off
10/100Base-TX (RJ-45) [100 m/328 ft.]
• Loopback SW3: TP Speed with Auto-Negotiation Off
SW4: Fiber Duplex
• Last Gasp Bi-Di single mode (SC) [20 km/12.4 mi.]
SW5: Transparent Link Pass Through
SW6: Mode: Terminal or Center
• Remote Management
Status LEDs Power Optional Accessories (sold separately)
• Automatic Link Restoration TP Duplex/Link/Activity
TP 10 Mbps/100 Mbps SFP Modules
• Link Test Fiber Link/Activity
Fiber Duplex
• Field Upgradeable Firmware Dimensions Width: 0.86” [22 mm]
Depth: 5" [127 mm]
Environment
Compliance EN55022 Class A, EN55024, CE Mark
Warranty Lifetime

CGFEB1040-140 & CGFEB4040-180
Point System™ Gigabit Ethernet Media Converter Module
10/100/1000 Ethernet Multiport
Multiport media converters provide copper to fiber conversion

as well as fiber to fiber conversion. These converters can Ordering Information
operate as 3 port switches or as a 2 port devices with fault CGFEB1040-140
tolerant fiber redundancy, while supporting a variety of 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
to (2) 1000Base-X SFP Slots (empty)
Ethernet network speeds and various cabling medium.
CGFEB4040-180
Applications include: extend network distance, bridge legacy 100/1000Base-X SFP Slot (empty)
10/100 devices to a Gigabit backbone, and protect critical to (2) 1000Base-X SFP Slots (empty)
networks with fiber redundancy. Optional Accessories (sold separately)
SFP Modules
CGFEB1040-140 CGFEB1040-180
• Auto-Negotiation Standards IEEE 802.3
(copper and fiber ports) IEEE 802.3ab
IEEE 802.3u
• Switch Selectable Speeds (UTP) when IEEE 802.3z
Auto-Negotiation is off IEEE 802.1P
IEEE 802.1q
• Auto-MDI/MDIX
Data Rate TP (port 1): 10/100/1000 Mbps (-140 model only)
• Far-End-Fault (FEF) (100Base-FX setting SFP (port 1): 100/1000 Mbps (-180 model only)
on port 1 only) CGFEB1040-140 only SFP (port 2,3): 1000 Mbps
• Automatic Link Restoration Filtering Addresses 8K MAC Addresses

Max Frame Size 802.3ac tagged: 1628 bytes
• Fiber Redundancy Untagged: 1632 bytes
(<50ms switching time)
Dip Switches Switch 1: TX - Enable/Disable Auto-Negotiation
• IEEE 802.1P QoS, IPv4 Tos/DiffServ, IPv6 Switch 2: TX - Force 10 Mbps or 100 Mbps with Switch 1 off
traffic class Switch 3: TX - Force Half or Full duplex with Switch 1 off
Switch 4: Enable/Disable Fiber Redundancy port (2/3)
• IEEE 802.1q VLAN tagging and double IEEE 5: Enable/Disable primary/secondary revert with
tagging (Q in Q) Switch 4 on
• Field Upgradeable Firmware IEEE 6: Enable/Disable P2 to P3 blocking
Dip Switches Switch 1: Port 1 speed 100 Mbps/1000 Mbps
• Virtual Cable Test (VCT) on UTP port IEEE 2: Port 1 duplex full/half
CGFEB1040-140 only IEEE 3: Port 1 mode 1000Base-X/SGMII
• Bandwidth Allocation IEEE 4: Enable/Disable Fiber Redundancy (port 2/3)
IEEE 5: Enable/Disable primary/secondary revert with
• SGMII support on port 1 for use with Switch 4 on
10/100/1000Base-T copper SFPs IEEE 6: Enable/Disable P2 to P3 blocking
FEB1040-180 only Status LEDs PWR: ON green = Power applied to card
• 100/1000Base-X, dual speed support TP (Duplex/Link/Activity):
on port 1 for use with 100Base-FX or Orange: ON = Half-duplex Link;
1000Base-SX/LX, SFPs (CGFEB1040-180 BLINK = Activity;
only) Green: ON = Full-duplex Link;
BLINK = Activity
• DMI, Digital diagnostics per SFF-8472 TP (10 Mbps/100 Mbps/1000 Mbps):
Off = 10 Mbs; Orange = 100 Mbs;
• RMON Counters for each port Green = 1000 Mbs
LACT (Fiber SFP Link/Activity):
Green: ON = Link; BLINK = Activity
Depth: 5" [127 mm]
Power Consumption 6 Watts
Environment
Compliance CISPR/EN55022 Class A, EN55024, EN61000, FCC Class A,
CE Mark
Warranty Lifetime

CTGFFxxxx-100
Point System™ 10 Gigabit Ethernet Media Converter Module
10GBase-X to 10GBase-X
The Transition Networks’ 10 Gigabit Ethernet fiber to fiber converter is

a 2-port 10G pluggable media converter, supporting a variety of XFP Ordering Information
and SFP+ modules allowing network designers to utilize the module to CTGFF4747-100
meet their network requirements. (2) Port 10GBase-xx open XFP
to XFP Slot (empty)
The media converter can use either Transition Networks’ or a third
party's MSA compatible 10G XFP or SFP+ modules including support CTGFF4848-100
(2) Port 10GBase-xx open SFP+
for the following standards; 10GBase-SR, 10GBase-LR, 10GBase-ER, to SFP+ Slot (empty)
10GBase-LRM, and 10GBase-ZR.
CTGFF4747-100 Optional Accessories (sold separately)
This converter provides 3R (Reamplify, Reshape, and Retime) optical
SFP or XFP Modules
signal regeneration. This converter is also ideal for campus or business Supports both SFP or XFP Modules
environments where remote devices can be networked in a point-to-
point configuration and distances are greater than the 15m limitation
of conventional copper serial cables.
• Supports 10 Gigabit Ethernet Fiber to
IEEE 802.3ak
Fiber full-duplex conversion IEEE 802.3ag
IEEE 802.3
• LED Link Status Indicators IEEE 802.3x
• Link Pass Through Data Rate 10 Gbps
Dip Switches SW1- Port 1 mode
• Automatic Link Restoration
UP: Limiting (xR); DOWN: Linear (LRM)
SW2- Port 2 mode
• Loopback
• Supports +5V, +3.3V, and +1.8V MSA SW3- LPT UP: Enabled
DOWN: Disabled
compliant XFP modules SW4-Interface loopback, forces each fiber to loop its RX to TX
• Supports 3R (Reamplify, Reshape, and Status LED PWR (power): GREEN- power on
Retime) optical signal regeneration 1LNK- fiber #1 link: GREEN- On link
1ACT- fiber #1 activity/fault: GREEN- BLINK activity,
• For use in all Point System™ Chassis’ YELLOW- Fault
except for the 1-Slot Chassis 2LNK- fiber #2 link: GREEN- On link
• Manageable when installed in a YELLOW- Fault
managed Point System™ Chassis Dimensions Width: 1.72” [44 mm]
Depth: 5" [127 mm]
• Supports 10GBase-Cx4 modules in the Height: 3.4” [86 mm]
CTGFF4747-100 Power Consumption 7 Watts
Environment
Compliance FCC Class A, EN55024 (CISPR22),
Class A, CE Mark, EN55022 Class A
Warranty Lifetime

CRS2F311x-100
Point System™ RS232 Remotely Managed
Media Converter Module
RS232 Copper to Fiber
Link a remote terminal to a host computer: Connect multiple devices,
such as security scanners, POS devices, remote terminals and building Ordering Information
access/alarming systems to a host computer. CRS2F3111-100
Transition Networks’ serial RS232 to fiber converters allow you to DB-9 [15 m/49 ft.]
extend the distance between serial connections with the use of Link Budget: 11.0 dB
fiber optic cable. These full-featured converters transmit the full
CRS2F3113-100
complement of RS232 flow control/handshaking signals optically and DB-9 [15 m/49 ft.]
supports full or half-duplex asynchronous data transmission at speeds to 1300nm multimode (SC) [2 km/1.2 mi.]
up to 115 Kbps. Link Budget: 11.0 dB
CRS2F3113-100 CRS2F3114-100
The diagnostic features included on these converters make installation DB-9 [15 m/49 ft.]
easy and intuitive. A DTE/DCE switch eliminates the frustration over to 1310nm single mode (SC)
selecting the appropriate cable. A Loopback switch allows for complete [20 km/12.4 mi.] Link Budget: 16.0 dB
diagnostic testing prior to system turn-up or during troubleshooting. CRS2F3115-100
Unit and Port LEDs allow for quick status information of the device. DB-9 [15 m/49 ft.]
to 1310nm single mode (SC)
Standards EIA/TIA-574
• Read/write access to remote
EIA/TIA RS-232E
stand-alone unit
Data Rate 115 Kbps
• Local or Remote Loopback on Switches DTE/DCE: Select appropriate position
copper and fiber Loopback: Norm = normal operation;
Loop = Fiber and copper loopback
• DTE/DCE switch for easy
Status LEDs P (Power): Lit for normal operation
installation with straight- RX: Steady = Copper Link
through cabling Flashing = Rx Data
FL: Steady = Fiber Link
• Full/Half-duplex asynchronous Flashing = Loopback mode
transmission at speeds up to
115 Kbps Depth: 5" [127 mm]
• Supports the following flow
control signaling: Power Consumption 5.0 Watts
1. DCD - Data Carrier Detect Environment specs are dependent on the chassis chosen
Environment
2. RXD - Receive Data Operating: 0°C to 50°C
3. TXD - Transmit Data Humidity: 5% to 95% (non-condensing)
4. DTR - Data Terminal Ready
5. SG - Signal Ground Weight 1 lb. [0.45 kg]
6. DSR - Data Set Ready Compliance CISPR22/EN55022 Class A + EN55024, EN60950 Class A
7. RTS - Request To Send FCC Class A, CE Mark
8. CTS - Clear To Send Warranty Lifetime
Management Features
• Report Converter status to Chassis
management software:
-- Local Fiber Link status
-- Local/Remote
-- Hardware/Software mode
-- Local/Remote Loopback
-- Local/Remote DTE/DCE mode
-- Local/Remote link status

-- Local Loopback
-- Remote Loopback
• Can be used with any Point System™

Chassis

CRS4F3x1x-100
Point System™ RS422/485 Media Converter Module
RS422/485 Copper to Fiber
Transition Networks’ serial RS422/485 to Fiber Media Converter allows

you to extend the distance between serial connections with the use of
fiber optic cable. This full-featured converter operates in 2-wire mode for
RS422 and either 2-wire or 4-wire mode for RS485 and supports full or CRS4F3211-100
half-duplex data transmission at speeds up to 1.25 Mbps. Terminal Block [1.2 km/0.7 mi.]
Link a remote terminal to a host computer. Connect multiple devices, such Link Budget: 11.0 dB
as security scanners, POS devices, remote terminals and building access/
*CRS4F3213-100
alarming systems to a host computer.
Terminal Block [1.2 km/0.7 mi.]
This converter is ideal for campus or business environments where to 1300nm multimode (SC) [2 km/1.2 mi.]
remote devices can be networked in either a point-to-point or point-
CRS4F3211-100 *CRS4F3214-100
to-multi-point configuration.
to 1310nm single mode (SC) [20 km/12.4 mi.]
Standards EIA/TIA RS-422

• RS422 or RS485 operation * Product is in BTO status and is built on a per
EIA/TIA RS-485
order
• 2-wire or 4-wire in operation in Switches SW1: 130 ohm resistor Rx (Down = enable)
basis. Please contact a Transition Networks sales
RS-485 mode SW2: 130 ohm resistor Tx (Down = enable)
associate for details and lead times.
SW3: 1k ohm “pull-down” (Down = enable)
• Full/Half-duplex transmission SW4: 1k ohm “pull-up” (Down = enable)
at speeds up to 1.25 Mbps SW5: 2-wire/4-wire (Down = 4-wire)
SW6: RS-485/RS-422 (Down = RS-422)
• Field Upgradeable Firmware Status LEDs PWR (Power): Lit for normal operation
RXC: Steady = Data Rx on copper link;
• Can be used with any Point System™ Flashing = Rx Data at low speed
Chassis RXF: Steady = Fiber Link
Depth: 5" [127 mm]
Management Features Power Consumption 5.0 Watts

Environment
• Report Converter status to Chassis Operating: 0°C to 50°C
management software: Humidity: 5% to 95% (non-condensing)
-- Local Fiber Link status Altitude: 0 – 10,000 ft.
-- Receive data activity on the copper link Weight 1 lb. [0.45 kg]
-- Local Switch settings Compliance CISPR22/EN55022, EN55024, EN60950 Class A,
FCC Class A, CE Mark, UL 1950
-- 130 ohm resistor on RX
-- 130 ohm resistor on TX Warranty Lifetime
-- 1K ohm “pull down”

-- 1K ohm “pull up”
-- 2-wire/4-wire operation
-- RS-485/RS-422 operation

CPSVT26xx-10x
Point System™ High Speed Serial Remotely Managed
Media Converter Module
V.35/X.21/RS449/RS530/RS232 Copper to Fiber
CPSVT2613-100
26-pin to 1300nm multimode (SC)
CPSVT2614-100
26-pin to 1310nm single mode (SC)

CPSVT2614-100 Recommended use in pairs
CPSVT2629-100
Features Specifications 26-pin to 1310nm TX/1550nm RX single fiber
single mode (SC) [20 km/12.4 mi.]
• Connect High Speed Serial signals on Standards ITU-T Link Budget: 19.0 dB
ISO-2593
copper to fiber CPSVT2629-101
Data Rate 1.2 Kbps to 10 Mbps 26-pin to 1550nm TX/1310nm RX single fiber
• Supports multiple protocols through the single mode (SC) [20 km/12.4 mi.]
Switches Side panel, external DCE speed switch, sixteen positions:
use of a universal 26-pin serial interface Speeds can also be set on DCE converters locally or Link Budget: 19.0 dB
connector remotely via software.
Cable Assemblies
• Extend the point of presence of a Front Panel Loopback Selector Switch: 21DCE-3
copper V.35/X.21/RS449/RS530/RS232 Right Position: Loop Fiber Back & Loop Copper Back DB-15 (FT) (26-pin) to (DCE) [3 m/10 ft.]
connection at data rates up to 10 Mbps. Left Position: Normal Operation 21DTE-3
• Supports Remote Management of a Jumpers Jumper (J4): Hardware/Software mode DB-15 (MT) (26-pin) to (DTE) [3 m/10 ft.]
stand-alone media converter Jumper (J6): RX Clock Polarity: Set to sample the 530DCE-3
receive data on the rising or falling edge of the receive clock DB-25 (FT) (26-pin) to (DCE) [3 m/10 ft.]
• Copper & Fiber Loopback Jumper (J7): TX Clock Polarity: Set to sample the
transmit data on the rising or falling edge of the receive clock 530DTE-3
DB-25 (MT) (26-pin) to (DTE) [3 m/10 ft.]
• LED indications for Fiber Link, Status LEDs Smart Serial Link: Green - Link is up;
Loopback & Data Green Flashing - In loopback mode; Copper Distances
Fiber: Green - Link is up;
• Ability to use a combination of any Standard Range*
Green Flashing - In loopback mode;
copper interface (RS449 to V.35, RS530 PWR (Power): Green - ON power applied to board RS232/V.24 15 m
to X.21, DTE-DTE, DTE-DCE, DCE- RS449/V.36 1.2 km
DCE,etc.) Depth: 5" [127 mm] V.35 600 m
• All interfaces converted at the X.21 1.2 km
physical level Power Consumption 5.0 Watts
RS530 1.2 km
Environment
• Synchronous or asynchronous capability *For reference only. Contact Transition Networks for
Humidity: 5% to 95% (non-condensing) detailed range information.
Manageable Features Compliance CISPR/EN55022, EN55024, EN60950 Class A,
• Report converter status to chassis FCC Class A, CE Mark
management software: Warranty Lifetime
-- Local Fiber Link status
-- Local/Remote Hardware/Software mode
-- Local/Remote Speed select
-- Local/Remote Cable type reporting,
near end
-- Local/Remote Clock polarity setting

-- Local or Remote Loopback
-- Local or Remote Speed Select

CAPTF33xx-1xx
Point System™ POTS 2-Wire Media Converter Module
POTS 2-Wire Copper to Fiber
Connect central-office voice grade signals to distant Plain Old Telephone

equipment (POTS) utilizing standard telephone signaling. Two units are required Ordering Information
to implement an end to end system. Unit A connects to a telephone line or PBX
Line Side FXS: CAPTF3311-105
and has the ability to detect ringing voltages and to act as a telephone (LINE Customer Side FXO: CAPTF3311-115
SIDE FXS). Unit B is the reciprocal unit and has the ability to act as a Central Twisted Pair (RJ-11) [5 km/3.1 mi.]
Office and connects to a telephone device (CUSTOMER SIDE FXO). to 1300nm multimode (ST) [2 km/1.2 mi.]
Customer Side FXO: CAPTF3313-115
Twisted Pair (RJ-11) [5 km/3.1 mi.]
to 1300nm multimode (SC) [2 km/1.2 mi.]
CAPTF3311-105
Features Specifications Customer Side FXO: CAPTF3314-115
Standards FCC Part 68 to 1310nm single mode (SC) [20 km/12.4 mi.]
• Audio transmission
TBR21 Link Budget: 16.0 dB
• Caller ID Analog Port Connector: RJ-11(Telephone Emulation or FXS)
Impedance: 600 ohms (Central Office)
• Automatic Ring Down REN: 0.48
Loop Current: 20 to 60ma.
• Dual or single fiber options Insertion Loss: 0.0 +/-1.0 dB at 1000 Hz Line Side FXS: CAPTF3329-105*
when both ports are terminated at 600 ohms Customer Side FXO: CAPTF3329-115*
• SNMP Management Twisted Pair (RJ-11) [5 km/3.1 mi.]
Emulation or FXO Battery Source: 48 VDC +/- 5V
Ringing Supply: 90Vp-p to 1310nm TX/1550nm RX single fiber
• Ringing at the distant end single mode (SC) [20 km/12.4 mi.]
Ring Frequency: 25 Hz.
(Reproduces frequency detected by side A) Link Budget: 19.0 dB
• Electrical interface is provided through
an RJ-11 female connector Ring Cadence: Reproduces cadence Line Side FXS: CAPTF3329-106*
detected by side A
Customer Side FXO: CAPTF3329-116*
• Field Upgradeable Firmware Insertion Loss: 1.0 +/- 1.0 dB @ 1000 Hz when
both ports are terminated at 600 ohms
to 1550nm TX/1310nm RX single fiber
Voice Frequency 300 Hz – 3 KHz single mode (SC) [20 km/12.4 mi.]
Jumpers Automatic Ring Down/Normal
Status LEDs LED colors are Green
SDF (Fiber Link): On indicates fiber link up; * Note: Single Fiber products should be
ACT (In Use): On indicates unit in use; paired by application:
Flashing indicates ringing;
PWR (Power): On indicates power is on Note: CAPTF cards cannot be used with the
Dimensions 105 Models: 1-Slot Point System™ Chassis™. Devices
Width: 0.86” [22 mm] must be used in pairs. Typical installation will
Depth: 5" [127 mm] include a chassis card installed in the Point
Height: 3.4” [86 mm] System™ locally and a stand-alone device
115 Models: installed at the remote location.
Width: 1.75” [43 mm]
Depth: 5" [127 mm]
Power Consumption 4 Watts (105 Models)
7 Watts (115 Models)
Environment
Compliance Safety: CISPR A, CE Mark
Emissions: FCC Class A, VCCI Class A, EN 55022 (CISPR 22)
Class A, ICES 003
Warranty Lifetime

Stand-Alone Media Converters Offer Low-Density Solutions
Deployed at the Network Edge or Remote Locations
• Point of Sale Retail Environments
• Healthcare/Medical Facilities
• Banking and Financial Institutions
• Municipal and Utility Facilities
Connect Office and Retail Devices

to a Fiber Network
Stand-Alone Network Camera

Media Converter
Work Station Stand-Alone
Media Converter
ION Chassis
Stand-Alone
VoIP Phone Media Converter Stand-Alone
Media Converter Point of Sale
BACK OFFICE Register
Door Lock Stand-Alone Stand-Alone

w/ Card Reader Media Converter Media Converter Bar Code Scanner
Copper Switch
Features:
• Designed to be deployed at the network edge, linking back over fiber to
another stand-alone converter or to a converter card in an ION chassis
• Supports a wide variety of communication protocols
• Various versions supporting different levels of network management
• Converts back to copper at remote end of the fiber link
• Typically used in low-density deployments where only a few points of SSETF1011-205
conversion are required

E-MCR-05
12-Slot Media Converter Rack
Flexible Design for growing networks
simplify your installation of Transition Ordering Information
Networks’ stand-alone media converters with E-MCR-05
the Media Converter Rack. This 19” rack- 12-Slot Media Converter Rack
mountable unit supports up to twelve media Optional Accessories (sold separately)
converters while the unique design allows
for multiple connections, consolidated into a
single device, making network connections Mounting Options
easier and more efficient. RMBU
Universal Rack Mount Bracket
• Space Saving Design: This device is powered (Media Converters Sold Separately) for Stand-Alone Converters
by a single internal universal power supply; RMBM
eliminating the need for the multiple power Rack Mount Bracket for
connections often associated with multiple Mini Media Converters
converter installations. The unit saves space
in the wiring closet by providing a means for
mounting (12) converters in (3) units of rack
space while reducing the number of wall outlet
Specifications
power connections required. Dimensions Width: 17" [432 mm]
Depth: 15" [381 mm]
• Convenience: The media converters are hot- Height: 4.75” [121 mm]
swappable. They can also be removed from the
rack, powered externally, and used as stand- Power Supply Universal, internal power supply;
alone units in new applications as your network AC 85 – 264V, 47 – 63 Hz.
needs change in the future. Environment Operating: 0°C to 50°C
• Cost Effective: Easily rack mount the single- Altitude: 0 – 10,000 ft.
wide, 12 volt powered, Transition Networks’
media converters that you already own, or buy Weight 12 lbs. [5.2 kg]
stand-alone units today and rack mount them Compliance UL Listed, cUL Listed (Canada), CISPR/EN55022
in the future. Class A, FCC Class A, CE Mark
• Includes: (12) Universal rack mount media Warranty Lifetime
converter brackets.
RMS19-SA4-01
4-Slot Media Converter Shelf
• Space Saving Design: save rack space in low
density deployments: 19” rack mount, 1RU Ordering Information
high. RMS19-SA4-01
• Flexible: mix and match up to 4 Transition
Networks stand-alone media converters RMS19-SA4-01-B
(excluding double-high models). 4-Slot Media Converter Shelf with 3 Faceplate
Blanks
• Non-powered Design: don’t pay for power
supplies twice. This low cost design allows the Optional Accessories (sold separately)
use of the power supplies that ship with the
media converter. (Media Converters Sold Separately) RMS19-B
Faceplate Kit of 3 Blanks to cover up unused
• Power Cord Tie-Downs: eliminates the slots
accidental disconnection of power supplies
from the media converters.
Mounting Options
• Converter Mounting Brackets Specifications RMBU
• Securely mounts the converters to the shelf. Dimensions Width: 17" [432 mm] Universal Rack Mount Bracket for
Depth: 6" [152 mm] Stand-Alone Converters
• Includes universal rack mount media converter Height: 1.75” [44 mm]
brackets. RMBM
Weight 3 lbs. [1.35 kg] Rack Mount Bracket for Mini Media
• Optional Faceplate Blanks are available to Converters
cover up unused slots. Warranty Lifetime
• Rack mount up to 4 stand-alone devices in 1

unpowered shelf.

RMS19-NID2-01
2-Slot Shelf for S3290 Series NID
• Clean up your S3290 installations with this 19”
rack mountable shelf
• Rack mount up to 2 of the S3290 devices in 1
unpowered shelf RMS19-NID2-01
2-Slot S3290 shelf, includes 4 device brackets
• Space saving design: save rack space in low and reversible rack mount ears
density deployments: 19” rack mount, 1RU high
• Includes reversible rack mount ears for either
19” or 23” rack mount installations
• Flexible:
-- Mix and match up to 2 Transition Networks
S3290 Series NID devices
-- Deep enough to hold the external AC/DC power Specifications
supply that ships with the S3290 Dimensions Width: 19" [482.6 mm]
Depth: 12" [304.8 mm]
-- Can also accommodates the S3290-RPS wide Height: 1.75” [44.5 mm]
input DC power supply
• Includes 4 mounting brackets, 2 for each of the
S3290 Series NIDs Warranty Lifetime
• Securely mounts the S3290 into the shelf

• Non-powered design: don’t pay for power
supplies twice. This low cost design allows the
media converter.
• Power cord tie-down clamps: help to eliminate
the accidental disconnection of power supplies
RMS19-SA4-02
• Clean up your stand-alone media converter
installations with this 19” rack mountable shelf
• Rack mount up to 4 stand-alone devices in a RMS19-SA4-02
1RU unpowered shelf 4-Slot Media Converter Shelf, includes 4
brackets and 3 slot blanks
• Space saving design: save rack space in low
density deployments: 19” rack mount, 1RU high Mounting Options
(Media Converters Sold Separately)
• Flexible: mix and match up to 4 Transition RMBU
Networks stand-alone media converters Universal Rack Mount Bracket for
-- Including ION stand-alone converters Stand-Alone Converters
-- Including new Ethernet Extender converters RMBM

Rack Mount Bracket for Mini Media
-- Excluding the double-high converters
Converters
• Includes 4 converter mounting brackets Specifications
• Includes 3 slot blanks to cover unused slots Dimensions Width: 19" [482.6 mm]
Depth: 14" [355.6 mm]
• Securely mounts the converters to the shelf Height: 1.75” [44.5 mm]
• Non-powered design: don’t pay for power
supplies twice. This low cost design allows the Warranty Lifetime
media converter.
• The shelf is deep enough to hold the power
supply, helping to reduce the strain on the
power connections
• Power cord tie-downs: help to eliminate the
accidental disconnection of power supplies

Wall, Rack, DIN Rail Mounting Brackets
Wall Mount Brackets are small simple Specifications

“L-shaped” tabs that allow a single Transition Weight 1 lb. [0.45 kg] Ordering Information
Networks’ media converter to be mounted WMBD
Warranty Lifetime
anywhere. The brackets are sold in pairs and 5" [127 mm] DIN Rail Mount Bracket
are available in several sizes and types to match Fits all Stand-Alone Converters; Single or Dual
Slot ION Chassis
the different sized media converters and space
requirements. WMBD-E
DIN Rail Brackets allow stand-alone media

Standard Mounting Options 4.3” [109 mm] DIN Rail Mount Bracket
(Extended) Fits all Stand-Alone Converters
converters to be mounted to a DIN Rail, common with piggyback power supply attached
in industrial environments, in either a flat mount

against the DIN Rail or in a vertical mount in
WMBL; WMBP; WMBS WMBD-F
3.3” [84 mm] DIN Rail Mount Bracket (flat)
Fits all Stand-Alone Converters
which the converter mounts on its edge. 3.25” [82 mm] wide
Mini Wall Mount brackets allow a mini media WMBD-FS
converter to be securely mounted to a wall or 3.1” [79 mm] DIN Rail Mount Bracket
(flat, small) Fits Stand-Alone Converters 3"
any other flat surface. [76 mm] wide
WMBJ-V
Mini Mounting Options 2.75” [70 mm] Wall mount bracket kit for
Analog Video products including:
J/VD-TX-01xx, J/VD-MRX-01xx
RMBM WMBL
4" [102 mm] Fits Stand-Alone Converters
Point System™ & ION
WMBP
5" [127 mm] Fits Single or Dual Slot ION
Chassis
WMBV; WMBD WMBS
3.2” [81 mm] Fits Stand-Alone Converters
size 3.9” [99 mm]
WMBV
5" [127 mm] Vertical Mount
Fits all Stand-Alone Converters;
Single or Dual Slot Point System™ Chassis
WMBV-E
DRBM 4.7” [119 mm] Extended Vertical Mount Fits
all Stand-Alone Converters with piggyback
power supply attached
RMBU
Rack mount bracket for stand-alone convert-
ers, used with E-MCR-05 and RMS19-SA4-01
Mini Media Converters

RMBU WMBM
3.3” [84 mm] Fits all “Mini” Media Converters
RMBM
Rack mount bracket for mini converters, used
with E-mcr-05 and RMS19-SA4-01
DRBM
WMBM 3.3” [84 mm] DIN Rail Mount Bracket for
“Mini” Media Converters
Fits all “Mini” Media Converters

SPS-2460-xx
External DC Power Supply
For Stand-alone Media Converters
Transition Networks’ wide input external power supplies allow you

to provide a wide range of input voltages to power your stand-alone Ordering Information
converters and chassis. Input voltages of 24 – 60 VDC and 24 – SPS-2460-PS
42VRMS allow for installation of any of Transition Networks’ stand- Piggy-Back
alone media converters in most industrial, telecom and commercial For use with: Point System™
stand-alone media converters 3.25” wide
applications, as well as HVAC and building controlled environments. (SBFTF1011-100; SGETF1013-100, etc.)
Multiple form factors allow flexibility to meet your application. The SPS-2460-SA
SPS-2460-SA stand-alone form factor can be used with all Transition Networks’ Stand-Alone
Stand-Alone Power Supply stand-alone media converters as well as the single-slot and dual- For use with: All stand-alone media
converters; Single-Slot Point System™
slot Point System™ Chassis. The piggy back form factor allows the Chassis; Dual-Slot Point System™ Chassis
power supply to attach directly to the converter and eliminate the
power cable commonly found between the power supply and the
converter. Once the piggy back supply is attached to the converter, the
combined assembly is much easier to wall mount or attach to DIN Rail
environments than using a separate supply.
Specifications
Output Voltage: 12.25 VDC
Current: 1.0A
Load Regulation: ±5% at 10% load to full rated load
Noise and Ripple: ±40 mV peak-to-peak of output voltage
Input Voltage: 24 – 60 VDC; 24 – 42VMRS
SPS-2460-PS Efficiency: 80% (typical)
Piggy-Back Power Supply Isolation Voltage (Dielectric withstand) Meets IEC 950 for one minute
1500 VAC: Output/Input
1500 VAC: Input/Safety GND
1500 VAC: Output/CASE
Protection Over Load Protection (OLP): When the average power rating
exceeds 125%-150% of maximum power, output voltages
reduced to a safe dissipation level; protects against short circuit
of any output
No Load Protection: No damage to power supply when
operating at no load
Transient Protection: No voltage spike at power-on, power-off,
or power failure
Dimensions SPS-2460-SA:
Width: 3.75” [95 mm]
Depth: 3.1” [79 mm]
Height: 1" [25 mm]
SPS-2460-PS:
Width: 4.5” [114 mm]
Depth: 3.4” [86 mm]
Height: 1" [25 mm]
Power Consumption 3 Watts (max) @ 24 VDC input, 12.25 VDC output
Environment Operating: -20°C to 65°C
MTBF Greater than 250,000 hours with typical load Operating
at 25°C temperature (calculated according to MIL-HDBK-217E)
Compliance CISPR/EN55022, Class A, FCC Class A
Warranty Lifetime

J/E-CX-TBT-02
Stand-alone Ethernet Media Converter
10Base-2 to 10Base-T
The Transition Networks J/E-CX-TBT-02 stand-alone Ethernet media

converter is ideally suited for connecting legacy 10BASE-2 Ethernet
J/E-CX-TBT-02
segments to 10BASE-T Ethernet segments. The J/E-CX-TBT-02 does 10Base-T (RJ-45) [100 m/328 ft.]
not add the latency associated with a repeater or reduce the total to 10Base-2 (BNC) [185 m/607 ft.]
number of repeaters allowed within a given network topology.
Note: Not rack-mountable
J/E-CX-TBT-02 Power Supply Included

specific power supply, add the
Features Specifications extension from the list below to the end

of the SKU; Ex: J/E-CX-TBT-02-NA
Standards IEEE 802.3 -NA = Country Code
• Protects your equipment investment by
10Base-T -NA = North America
allowing you to upgrade-not replace- 10Base-2 -LA = Latin America
your current network. -EU = Europe
Switches MDI/MDI-X: Selects correct RJ-45 port setting -UK = United Kingdom
• Provides (1) RJ-45 twisted pair Status LEDs PWR (Power): ON = Connected to external power -SA = South Africa
connector and (1) BNC 10Base-2 BNC/ACT (BNC Activity): Flashing = 10Base2 -JP = Japan
data traffic -OZ = Australia
compliant port. -BR = Brazil
TP/ACT (TP Activity): ON = 10Base-T link
• Supports up to (24) devices daisy- connection; Flashing = 10Base-T data traffic
chained on (1) coax segment per twisted COL (Collision): Flashing = Collision present
pair segment. Dimensions Width: 2.75” [71 mm]
Depth: 3.7” [94 mm]
• MDI/MDI-X selection switch allows Height: 1" [25 mm]
converter to be connected to either a Power Input External AC/DC: 5 VDC, 1.0 A
workstation/NIC or hub, switches and
routers without changing the cable type. Humidity: 5% to 90% (non-condensing)
• BNC T-connector included for daisy
chain applications. Weight 2 lbs. [0.90 kg]
Compliance Safety: Wall Mount Power Supply:
UL Listed and CSA certified;
CISPR22/EN55022 Class A,
Warranty Lifetime

E-TBT-FRL-05(xx)
Stand-alone Ethernet Media Converter
10Base-T to 10Base-FL
Extend Network Distance: (2) 10Base-T to 10Base-FL Media
Converters used back-to-back extend the distance between (2)
10Base-T devices up to 5 km (3.1 mi.) using multimode fiber or up to
40 km (24.9 mi.) using single mode fiber without a repeater. Ordering Information
E-TBT-FRL-05
Connect Unlike Devices: Connect your workgroup to a distant server or 10Base-T (RJ-45) [100 m/328 ft.]
a central switch; or extend distances between like and unlike devices to 10Base-FL 850nm multimode (ST)
in either full or half-duplex modes. [2 km/1.2 mi.] Link Budget: 13.5 dB
E-TBT-FRL-05(SC)
E-TBT-FRL-05(SC) 10Base-T (RJ-45) [100 m/328 ft.]
to 10Base-FL 850nm multimode (SC)
E-TBT-FRL-05(L)
10Base-T (RJ-45) [100 m/328 ft.]
to 10Base-FL 1300nm multimode (ST)
E-TBT-FRL-05(SM)
• Auto-MDI/MDIX 10Base-T (RJ-45) [100 m/328 ft.]
10Base-T
to 10Base-FL 1310nm single mode (ST)
• Link Pass Through 10Base-FL
Switch S1: Enables/disables Link Pass Through
• Automatic Link Restoration E-TBT-FRL-05(XC)
Status LEDs PWR (Power): ON = connection to external AC power 10Base-T (RJ-45) [100 m/328 ft.]
• Integrate mixed cabling environments Link: ON = unit is receiving link pulses from a compliant device to 10Base-FL 1310nm single mode (SC)
RX (Receive): ON = packets are being received [20 km/12.4 mi.] Link Budget: 7.0 dB
using either switched or shared Ethernet
Dimensions Width: 3" [76 mm] E-TBT-FRL-05(LH)
Depth: 3.9” [99 mm] 10Base-T (RJ-45) [100 m/328 ft.]
Height: 1" [25 mm] to 10Base-FL 1310nm single mode (ST)
Power Input External AC/DC required; 12 VDC, 0.5A, unregulated, standard [40 km/24.9 mi.] Link Budget: 19.0 dB
Altitude: 0 – 10,000 ft. Optional Accessories (sold separately)
Weight 2 lbs. [0.90 kg] Wide Input (24 - 60 VDC) Power Supplies
Compliance Safety: Wall Mount Power Supply: SPS-2460-SA
UL Listed, cUL Listed (Canada) Stand-Alone Power Supply
Regulatory: FCC Class A, CISPR22/EN55022
Class A, EN55024, EN61000, CE Mark
Warranty Lifetime Mounting Options
E-MCR-05
RMS19-SA4-01
Power Supply Included WMBD
To order the corresponding country DIN Rail Bracket 5" [127 mm]
WMBD-FS
extension from the list below to the end DIN Rail Bracket (flat, small) 3.1” [79 mm]
of the SKU; Ex: E-TBT-FRL-05-NA
WMBS
-NA = Country Code Wall Mount Bracket 3.2” [81 mm]
-NA = North America
-LA = Latin America WMBV
-EU = Europe Vertical Wall Mount Bracket 5" [127 mm]
-UK = United Kingdom
-SA = South Africa
-JP = Japan
-OZ = Australia
-BR = Brazil

E-TBT-FRL-05(xxHT)
Unmanaged Hardened Ethernet Media Converter
(1) 10Base-T Port + (1) 10Base-FL Port
The E-TBT-FRL-05(xxHT) converter family contains simple “Plug-and-
Play” converters used at the edge of a hardened network to provide Ordering Information
10Base-T Ethernet connections for legacy devices in challenging E-TBT-FRL-05(HT)
locations. Depending on the model, these converters can provide 10Base-T (RJ-45) [100 m/328 ft.]
multimode or single mode fiber connections with SC or ST connectors to 10Base-FL 850nm multimode (ST)
for extended distance communications up to 20 kilometers. These
converters ensure safe reliable operation in temperatures between E-TBT-FRL-05(SCHT)
10Base-T (RJ-45) [100 m/328 ft.]
-25°C and +70°C. to 10Base-FL 850nm multimode (SC)
Transition Networks’ hardened media converters are certified to [2 km/1.2 mi.] Link Budget: 13.5 dB
operate reliably in harsh environments where excessive heat may be a E-TBT-FRL-05(XCHT)

10Base-T (RJ-45) [100 m/328 ft.]
concern, such as those found on factory floors, outdoor enclosures or 10Base-FL 1310nm single mode (SC)
other challenging environments. (Note that this device is rated to meet [20 km/12.4 mi.] Link Budget: 14.0 dB
“temperature” requirements of industrial environments only.)
Wide Input 9 (24 - 60 VDC) Power Supply

Features Specifications SPS-2460-SA
Stand-Alone Power Supply
• Auto-MDI/MDIX
Switch S1: Enables/disables Link Pass Through Mounting Options
Status LEDs PWR (Power): On for normal operation RMS19-SA4-01
• Automatic Link Restoration Link: Steady LED indicates unit is receiving link pulses from 4-Slot Media Converter Shelf
a compliant device
Receive: Flashing or lit LED indicates packets are being WMBD
• Connect legacy coax devices to a DIN Rail Bracket 5" [127 mm]
received
10Base-T network)
Dimensions Width: 3" [76 mm] WMBD-FS
Depth: 3.9” [99 mm] DIN Rail Bracket (flat, small) 3.1” [79 mm]
Height: 1" [25 mm]
WMBS
Power Supply External AC/DC required; 9 VDC. 1.0A; unregulated; standard Wall Mount Bracket 3.2” [81 mm]
Environment Operating: -25°C to +70°C E-MCR-05
Humidity: 5% to 95% (non-condensing) 12 Slot media converter rack
UL Listed and CSA certified, Power Supply Included
FCC Class, CE Mark
Warranty Lifetime extension from the list below to the end
of the SKU; Ex: E-TBT-FRL-05(HT)-NA
-NA = Country Code
-NA = North America
-LA = Latin America
-EU = Europe
-SA = South Africa
-JP = Japan
-OZ = Australia
-BR = Brazil

E-TBT-MC05
Stand-alone Ethernet Transceiver
10Base-5 AUI to 10Base-T RJ-45
This Attachment Unit Interface (AUI) transceiver provides a method

for connecting a workstation, or any other device with an AUI port, to Ordering Information
twisted pair cabling in a 10Base-T network. Devices with AUI ports E-TBT-MC05
could include: servers, hubs, bridges and routers. The E-TBT-MC05 10Base-5 (AUI) dB-15 male [50 m/164 ft.]
transceiver allows twisted pair, UTP or STP, to be connected to these to 10Base-T (RJ-45) [100 m/328 ft.]
AUI ports.
E-TBT-MC05
• Provides a complete interface of the AUI
10Base-T
to Ethernet UTP cable
Switches SW1: SQE Test: UP is enabled
• Supports data transfer rate of 10 Mbps SW2: Link Test: UP is enabled
SW3: Half or Full-Duplex: UP is for Half, Down is for Full
• CSMA/CD access mechanism Status LEDs COL: Blinks when detecting collisions
STAT: Solid Green: UTP Link established;
• Capable of driving the UTP cable Blinks Green: No UTP Link; 4-Blink Pattern: Polarity
segment up to 100 m (328 ft.) without reversal detected on UTP cable
the use of a repeater TX: Blinks when transmitting data on the RJ-45
RX: Blinks when receiving data on the RJ-45
• Selectable Link test and SQE test
functions Depth: 0.8” [20 mm]
• AUI locking post design allows the
E-TBT-MC05 to directly attach to a Power Consumption Not to exceed 75mA@12 VDC
host’s AUI connector Power Supply No external power required
• Can be used with or without an AUI Input Voltage 10.2 to 15.75 VDC
cable Input Current 250mA@12 VDC
• LED indicators for network monitoring Humidity: 5% to 95% (non-condensing)
and diagnosing Altitude: 0 – 10,000 ft.
• The RJ-45 port will automatically detect Weight 1 lb. [0.45 kg]
and reverse the polarity on the receive Compliance FCC & CISPR Class A, CE Mark
pair, if needed Warranty Lifetime

SSEFE10xx-100
Stand-alone Speed Selectable Media Converter
10Base-T to 10Base-FL or 100Base-TX to 100Base-FX
Transition Networks’ speed selectable copper to fiber Media Converter

allows you to extend the distance between copper based connections Ordering Information
with the use of fiber optic cable. The ability to select the speed of SSEFE1014-100
converter allows for easy migration from a 10 Mbps network today to a 10Base-T or 100Base-TX (RJ-45)
100 Mbps network in the future. This converter is a true Layer 1 device [100 m/328 ft.]
to 10Base or 100Base 1310nm single mode
as both the copper and fiber ports operate at the same speed setting (SC) [20 km/12.4 mi.] Link Budget: 17.0 dB
(i.e. 100Base-TX to 100Base-FX). For 10 Mbps applications, these
devices must be used in pairs.
SSEFE1014-100
Wide Input (24 - 60 VDC) Power Supplies

SPS-2460-PS
Features Specifications Piggy Back Power Supply
Standards IEEE 802.3 SPS-2460-SA
• Auto-MDI/MDIX
Switches Switch 1: Link Pass Through on/off Stand-Alone Power Supply
• Link Pass Through IEEE 2: 10 Mb or 100 Mb operation
• Automatic Link Restoration Status LEDs PWR (Power): Lit for normal operation Mounting Options
F-ACT: Blinking = data reception on the fiber link E-MCR-05
• Selectable speed setting F-100: ON = link at 100 Mb 12-Slot Media Converter Rack
F-10: ON = link at 10 Mb
• Supports Ethernet and Fast Ethernet C-ACT: Blinking = data reception on the copper link RMS19-SA4-01
-100 (Copper Speed): ON = link at 100 Mb 4-Slot Media Converter Shelf
C-10 (Copper Speed): ON = link at 10 Mb
WMBD
Dimensions Width: 3.25” [82.55 mm] DIN Rail Bracket 5" [127 mm]
Depth: 4.8” [121.92 mm]
Height: 1" [25 mm] WMBD-E
DIN Rail Bracket (Extended) 4.3”[109 mm]
WMBD-F
Power Input External AC/DC required; 12 VDC, 0.5A; unregulated; DIN Rail Bracket (flat) 3.3” [84 mm]
standard (provided)
WMBL
Wall Mount Bracket 4" [102 mm]
Altitude: 0 – 10,000 ft. WMBV
Weight 2 lbs. [0.90 kg] Vertical Wall Mount Bracket 5" [127 mm]
Compliance Safety: Wall Mount Power Supply: WMBV-E

UL Listed; cUL Listed (Canada); Extended Vertical Mount 4.7” [119 mm]
CISPR/EN55022 Class A, EN55024, EN60950 Class A,
Warranty Lifetime

extension from the list below to the end
of the SKU; Ex: SSEFE1014-100-NA
-NA = Country Code
-NA = North America
-LA = Latin America
-EU = Europe
-SA = South Africa
-JP = Japan
-OZ = Australia
-BR = Brazil

E-100BTX-FX-05(xxxx)
Stand-alone Fast Ethernet Media Converter
Extend Network Distance: Used in pairs, this media converter can extend distances between two twisted pair
switches or a switch and a server up to 2 km over multimode fiber or up to 80 km over single mode fiber.
Connect Remote Devices: Using one media converter, a switch with a copper port can be connected to a switch
with an existing fiber interface.
The converters will automatically re-establish link when connected to two 10/100 auto-negotiating switches,
after the fault condition has been corrected. With other manufacturers’ converters the user must intervene to re-
establish link.
E-100BTX-FX-05
Features
• Operates under heavy traffic loads without excess heat, so there is no Ordering Information Single Fiber Products
need for a failure-prone internal fan E-100BTX-FX-05 E-100BTX-FX-05(100)
100Base-TX (RJ-45) [100 m/328 ft.] 100Base-TX (RJ-45) [100 m/328 ft.]
• Round trip delay of only 40 bit times - far below the Class II rating of 92 bit to 100Base-FX 1300nm multimode (ST) to 100Base-FX 1310nm TX/1550nm RX
[2 km/1.2 mi.] Link Budget: 11.0 dB single fiber single mode (SC) [20 km/12.4 mi.]
times Link Budget: 19.0 dB
E-100BTX-FX-05(SC)
• Auto-Negotiation 100Base-TX (RJ-45) [100 m/328 ft.] E-100BTX-FX-05(101)
to 100Base-FX 1300nm multimode (SC) 100Base-TX (RJ-45) [100 m/328 ft.]
• Auto-MDI/MDIX [2 km/1.2 mi.] Link Budget: 11.0 dB to 100Base-FX 1550nm TX/1310nm RX
single fiber single mode (SC) [20 km/12.4 mi.]
• Active Link Pass Through E-100BTX-FX-05(LC) Link Budget: 19.0 dB
100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1300nm multimode (LC) E-100BTX-FX-05(102)
• Far-End-Fault (FEF) [2 km/1.2 mi.] Link Budget: 11.0 dB 100Base-TX (RJ-45) [100 m/328 ft.]
• Pause E-100BTX-FX-05(MT) single fiber single mode (SC) [40 km/24.9 mi.]
100Base-TX (RJ-45) [100 m/328 ft.] Link Budget: 25.0 dB
• Automatic Link Restoration to 100Base-FX 1300nm multimode (MT-RJ)
[2 km/1.2 mi.] Link Budget: 14.5 dB E-100BTX-FX-05(103)
100Base-TX (RJ-45) [100 m/328 ft.]
E-100BTX-FX-05(SM) to 100Base-FX 1550nm TX/1310nm RX
100Base-TX (RJ-45) [100 m/328 ft.] single fiber single mode (SC) [40 km/24.9 mi.]
to 100Base-FX 1310nm single mode (SC) Link Budget: 25.0 dB
Specifications E-100BTX-FX-05(SMLC) Optional Accessories (sold separately)
Standards IEEE 802.3 100Base-TX (RJ-45) [100 m/328 ft.]
100Base-FX to 100Base-FX 1310nm single mode (LC)
100Base-TX [20 km/12.4 mi.] Link Budget: 17.3 dB SPS-2460-SA
Switches SW1: Auto-Negotiation On/Off E-100BTX-FX-05(LH)
SW2: Pause TX On/Off 100Base-TX (RJ-45) [100 m/328 ft.]
SW3: Active Link Pass Through On/Off to 100Base-FX 1310nm single mode (SC) Mounting Options
SW4: Far-End-Fault (FEF) On/Off [40 km/24.9 mi.] Link Budget: 26.0 dB
E-MCR-05
Jumpers Jumper Block 1: Auto-MDI/MDIX enable E-100BTX-FX-05(XL) 12-Slot Media Converter Rack
100Base-TX (RJ-45) [100 m/328 ft.]
Status LEDs PWR (Power) to 100Base-FX 1310nm single mode (SC) RMS19-SA4-01
SDF or LKF (Link Fiber) [60 km/37.3 mi.] Link Budget: 29.0 dB 4-Slot Media Converter Shelf
SDC or LKC (Link Copper)
RXF (Receive Fiber) E-100BTX-FX-05(LW) WMBD
RXC (Receive Copper) 100Base-TX (RJ-45) [100 m/328 ft.] DIN Rail Bracket 5" [127 mm]
to 100Base-FX 1550nm single mode (SC) WMBD-FS
[80 km/49.7 mi.] Link Budget: 29.0 dB DIN Rail Bracket (flat, small) 3.1” [79 mm]
Depth: 4.7” [119 mm]
Height: 1" [25 mm]
WMBL
Power Supply External AC/DC required:120-240VAC input, 12VDC Output; Wall Mount Bracket 4" [102 mm]
unregulated, standard
WMBV
Environment Operating: 0°C to 50°C Vertical Wall Mount Bracket 5" [127 mm]
Compliance Regulatory: FCC Class A, EN55024, EN55022 Class A,
EN61000, CE Mark To order the corresponding country specific power
supply, add the extension from the list below to the
Warranty Lifetime end of the SKU; Ex: E-100-BTX-FX-05-NA
-NA = Country Code
NA = North America, LA = Latin America, EU =
Europe, UK = United Kingdom, SA = South Africa,
JP = Japan, OZ = Australia, BR = Brazil

E-100BTX-FX-05(xxHT)
Unmanaged Hardened Fast Ethernet Media Converter
(1) 100Base-TX Port + (1) 100Base-FX Port
The E-100BTX-FX-05 is a Hardened Ethernet stand-alone media

converter that provides an interface between 100Base-TX ports and Ordering Information
100Base-FX ports, allowing users to integrate fiber optic cabling into E-100BTX-FX-05(HT)
extreme 100Base-TX copper environments, by supporting an operating 100Base-TX (RJ-45) [100 m/328 ft.]
temperature range of -25°C to 65°C. Operating at Layer 1, the physical to 100Base-FX 1300nm multimode (ST)
layer, data is passed through the converter at line speed, making it ideal
for applications where low latency is essential. E-100BTX-FX-05(SCHT)
100Base-TX (RJ-45) [100 m/328 ft.]
E-100BTX-FX-05(SMHT)
100Base-TX (RJ-45) [100 m/328 ft.]
E-100BTX-FX-05(LHHT)
100Base-TX (RJ-45) [100 m/328 ft.]
Standards IEEE 802.3 Optional Accessories (sold separately)
• Extended Temperature Capable:
Designed to operate in environments Switches SW1: Auto-Negotiation On/Off
SW2: Pause TX On/Off Power Supplies
where ambient temperatures can rise as
SW3: LPT On/Off SPS-2460-SA
high as 65°C (149°F) SW4: FEF On/Off Stand-Alone Power Supply
• Auto-Negotiation Jumpers Jumper Block 1: Auto-MDI/MDIX enable
Mounting Options
• Auto-MDI/MDIX RMS19-SA4-01
SDF (Signal Detect Fiber): Lit for fiber link
SDC (Signal Detect Copper): Lit for copper link 4-Slot Media Converter Shelf
RXF (Receive Fiber): Flashing = RX data
WMBD
• Far-End-Fault Detection RXC (Receive Copper): Flashing = RX data
DIN Rail Bracket 5" [127 mm]
• Automatic Link Restoration Depth: 4.7” [119 mm] WMBD-FS
Height: 1" [25 mm] DIN Rail Bracket (flat, small) 3.1” [79 mm]
• Pause WMBL
Power Supply External AC/DC required; Output: 9 VDC. 1.0A;
120-240VAC input, unregulated; standard Wall Mount Bracket 4" [102 mm]
Environment Operating: -25°C to 65°C WMBV
Humidity: 5% to 95% (non-condensing) Vertical Wall Mount Bracket 5" [127 mm]
UL Listed, cUL Listed (Canada)
FCC Class A, CISPR22/EN55022
Class A, EN55024, EN61000, Power Supply Included
CE Mark
To order the corresponding country specific power
Warranty Lifetime
end of the SKU; Ex: E-100-BTX-FX-05(HT)-NA
-NA = Country Code

E-TBT-FRL-N-02(xx) &
E-100BTX-FX-N-02(xx)
PCI Powered Copper to Fiber Media Converters
Deliver low cost, fiber optic connectivity to the desktop with

these full-featured PCI powered media converters, designed to Ordering Information
install directly inside a workstation or file server and mount into E-TBT-FRL-N-02(ST)
any slot on a standard PCI. No configuration is required; making 10Base-T (RJ-45) [100 m/328 ft.]
to 10Base-FL 850nm multimode (ST)
installation a breeze. Since power is drawn directly from the PCI [2 km/1.2 mi.] Link Budget: 13.5 dB
slot, no additional power supply is needed, nor is there any CPU
E-100BTX-FX-N-02(SC)-F
utilization. 100Base-TX (RJ-45) [100 m/328 ft.]
Includes both standard and low profile brack-
ets
• 2 sizes to accommodate both standard Standards IEEE 802.3
and low profile PCI slots Switches E-TBT-FRL-N-02(ST)
S1: Switch to enable/disable Link Pass Through
• Auto-MDI/MDIX E-100BTX-FX-N-02(SC)-F
• Link Pass Through S1: Auto-Negotiation On/Off
S2: Pause On/Off
• Easily installs inside PC or file server; S3: LPT On/Off
no configuration required; no drivers to S4: FEF On/Off
install Status LEDs E-TBT-FRL-N-02(ST)
• Provides LEDs for easy network Power: Lit for normal operation
monitoring LKF: Link Fiber
LKC: Link Copper
• Saves space over traditional stand- RXF: Receive Fiber
alone converters while providing a more RXC: Receive Copper
secure installation E-100BTX-FX-N-02(SC)-F
LED1: Steady = Copper link
• No need to replace existing NICs LED2: Steady = Fiber link
• Draws power directly from PCI slot; no Dimensions Width: 0.8” [19 mm]
power supply needed Depth: 4.8” [121 mm]
Height: 4.8” [121 mm]
• Universal PCI Compliant, supports both
3.3V and 5V signaling environments Power Consumption E-TBT-FRL-N-02(ST) >450mA
E-100BTX-FX-N-02(SC)-F: 600mA
• E-100BTX-FX-N-02(SC)-F only: Power Source PCI edge connector
-- Auto-Negotiation
-- Far-End-Fault Humidity: 5% to 95% (non-condensing)
-- Automatic Link Restoration Altitude: 0 – 10,000 ft.
-- Pause Weight 1 lb. [0.45 kg]
Compliance CISPR22/EN55022, EN55024, EN60950 Class A, FCC Class A,
CE Mark
Warranty Lifetime

F-SM-MM-02 & SFMFF1xxx-20x
Stand-alone Fiber to Fiber Media Converter
Fiber to Fiber for Data Rates from 100Mbps to 155Mbps
Extend Network Distance: Extend distances up to 20 km with network

protocols that use 1300nm wavelength for fiber optic transmission. In Ordering Information
fact, distances can be extended in any networking protocol between SFMFF1313-200
100 Mbps and 155 Mbps. 1300nm multimode (SC) [2 km/1.2 mi.]
Save money by purchasing Fast Ethernet devices with lower cost to 1300nm multimode (SC) [2 km/1.2 mi.]
multimode fiber interfaces and use converters to introduce single Link Budget: 11.0 dB
mode fiber only where you need it. F-SM-MM-02
1300nm multimode (SC) [2 km/1.2 mi.]
F-SM-MM-02 Link Budget: 16.0 dB
Features Specifications Optional Accessories (sold separately)

• Link Pass Through F-SM-MM-02:
Status LEDs PWR (Power): Steady green LED indicates
• Automatic Link Restoration connection to external AC power WMBD-FS
LKM or Link (Left): Lit for multimode Link DIN Rail Bracket (flat, small) 3.1” [79 mm]
LKS or Link (Right): Lit for single mode Link
SPS-2460-SA
Dimensions Width: 3" [76 mm] Wide Input (24 - 60 VDC) Stand-Alone Power
Depth: 4.7” [119 mm] Supply
Height: 1" [25 mm]
SFMFF1313-200:
Power Supply External AC/DC required; 12 VDC. 0.5A Output;
120-240VAC input; unregulated; standard WMBD-F
DIN Rail Bracket (flat) 3.3” [84 mm]
Humidity: 5% to 95% (non-condensing) SPS-2460-PS
Altitude: 0 – 10,000 ft. Wide Input (24 - 60 VDC) Piggy Back Power
Supply
Compliance Safety: Wall Mount Power Supply: SPS-2460-SA
UL Listed and CSA certified; Wide Input (24 - 60 VDC) Stand-Alone Power
CISPR/EN55022 Class A, EN55024, EN61000, FCC Supply
Class A, CE Mark
F-SM-MM-02 or SFMFF1313-200:
Warranty Lifetime
E-MCR-05
RMS19-SA4-01
WMBD
WMBL
WMBV
Vertical Wall Mount Bracket 5" [127 mm]

of the SKU; Ex: F-SM-MM-02-NA
-NA = Country Code
-NA = North America
-LA = Latin America
-EU = Europe
-SA = South Africa
-JP = Japan
-OZ = Australia
-BR = Brazil

SSETF101x-205
Stand-alone Fast Ethernet Media Converter
10/100Base-TX to 10/100Base-SX
Extend Network Distance: Used in pairs, this media converter can

extend distances between two twisted pair switches or a switch and a Ordering Information
server up to 300m over multimode fiber (100Base-SX).
SSETF1011-205
Connect Remote Devices: Using a single 10/100Base-SX media 10/100Base-TX (RJ-45) [60 m/197 ft.]
to 10/100Base-SX 850nm multimode (ST)
converter, a switch with a copper port can be connected to a switch [300 m/984 ft.]
or any other 10/100Base-SX compliant device with an existing
SSETF1013-205
fiber interface. Low cost solution for fiber installation up to 300m 10/100Base-TX (RJ-45) [60 m/197 ft.]
(100Base-SX). to 10/100Base-SX 850nm multimode (SC)
[300 m/984 ft.]
Ideal for building backbone and horizontal cabling applications where
SSETF1011-205 cost and 10/100 auto-negotiation are critical. Optional Accessories (sold separately)
Wide Input (18 – 72VDC) Power Supplies

SPS-2460-PS
Piggy Back Power Supply
Features Specifications SPS-2460-SA


100Base-TX
• Auto-MDI/MDIX 10Base-FL Mounting Options
Draft TIA 100Base-SX-SP-4360A E-MCR-05
• Link Pass Through Recommended Optic 62.5/125 µm multimode fiber; 50/125 µm 12-Slot Media Converter Rack
Cable multimode fiber RMS19-SA4-01
• Efficient and Reliable: the 10/100 SX
Media Converter operates easily under Optional Optic Cable 100/140 µm multimode fiber; 85/125 µm multimode fiber 4-Slot Media Converter Shelf
heavy traffic loads without generating Status LEDs PWR (Power): ON = Connection to the external AC or DC power WMBD
excess heat; meaning a failure-prone SX-ACT (Fiber Activity): Flashing = Data reception DIN Rail Bracket 5" [127 mm]
internal fan is unnecessary on the fiber link WMBD-E
SX-100 (Fiber Speed): ON = Fiber link at 100 Mbps DIN Rail Bracket (extended) 4.3” [109 mm]
• Automatic Link Restoration SX-10 (Fiber Speed): ON = Fiber link at 10 Mbps
TX-ACT (Copper Activity): Flashing = Data reception WMBD-F
on the copper link DIN Rail Bracket (flat) 3.3” [84 mm]
TX-100 (Copper Speed): ON = Copper link at 100 Mbps WMBL
TX-10 (Copper Speed): ON = Copper link at 10 Mbps Wall Mount Bracket 4" [102 mm]
WMBV
Depth: 4.8” [121.92 mm] Vertical Wall Mount Bracket 5" [127 mm]
Height: 1" [25 mm]
WMBV-E
Power Supply External: AC/DC required; 12V DC. 0.5A Output; Vertical Wall Mount Bracket (extended)
120-240VAC input; unregulated; standard 4.7” [119 mm]
Compliance Safety: Wall Mount Power Supply: UL listed and CSA certified
Regulatory: FCC Class A, CISPR/EN55022 Class A, CE Mark
Warranty Lifetime
of the SKU; Ex: SSETF1011-205-NA
-NA = Country Code
-NA = North America
-LA = Latin America
-EU = Europe
-SA = South Africa
-JP = Japan
-OZ = Australia
-BR = Brazil

SBFTF1010-130
Stand-alone Fault-Tolerant Redundant Link Protector
10/100Base-TX
The Redundant Link Protector is a 10/100 Ethernet fault-tolerant
transceiver. It significantly reduces network downtime, adding a new Ordering Information
level of redundancy to 10/100 Ethernet connections. It also provides SBFTF1010-130
a redundant path for critical 10/100 devices. In a 10/100 Ethernet 10/100Base-TX Link Protector Transceiver
network, a critical device such as a file server may be connected (3) 10/100Base-TX (RJ-45) [100 m/328 ft.]
to the rest of the network through a hub or a switch. A common Optional Accessories (sold separately)
problem in this configuration is that the server is often connected to Wide Input (24 - 60 VDC) Power Supplies
the network through a single cable. If the cable fails, then the server SPS-2460-PS
is disconnected from the rest of the network. Similarly, if a port of Piggy Back Power Supply
a hub or switch to which the server is connected fails, the server is SPS-2460-SA
SBFTF1010-130
disconnected from the network. Stand-Alone Power Supply
The Redundant Transceiver has three ports: one for the critical (main)
Mounting Options
device, one for the default (primary) path for the critical device, and
E-MCR-05
another (backup) for the backup path. It is a smart device that will 12-Slot Media Converter Rack
not send any signal on a path that is inactive. If the primary path
RMS19-SA4-01
loses its link, then the transceiver will switch to the backup path in 4-Slot Media Converter Shelf
approximately 189 milliseconds.
WMBD
When the primary path re-establishes its link, the Redundant Link DIN Rail Bracket 5" [127 mm]
Protector will automatically switch back to the primary path. WMBD-F
Optional functionality, controlled via a dip switch, allows the unit to
move from the fault-tolerant mode to a 3-port switch mode. WMBL
WMBV
Features Specifications Vertical Wall Mount Bracket 5" [127 mm]
• Fault-tolerant redundant connections
RJ-45 Connectors Type: 8-position, RJ-45 receptacle:
• Easy to install and use 1: TX+5: NC (no connection)
2: TX-6: RX- Power Supply Included
• Supports half and full-duplex 3: RX+7: NC (no connection)
transmission 4: NC (no connection) To order the corresponding country
8: NC (no connection) specific power supply, add the
• Auto-MDI/MDIX extension from the list below to the end
Dip Switches SW1: Auto-Negotiation Enable/Disable
SW2: 10/100 Mbps of the SKU; Ex: SBFTF1010-130-NA
SW3: Full/Half-Duplex -NA = Country Code
• IEEE 802.3 compliant SW4: Redundancy/Switch -NA = North America
-LA = Latin America
System LEDs Power (PWR): Indicates the presence of POWER -EU = Europe
• 9 diagnostic LEDs Primary (PRI): Indicates a link is established on the Primary port -UK = United Kingdom
Backup (BKP): Indicates the link has moved over -SA = South Africa
• Optional 3-port switch mode to the Backup port -JP = Japan
-OZ = Australia
Port LEDs Lower Right: -BR = Brazil
Green indicates 100 Mbps;
Orange indicates 10 Mbps;
Flashing indicates Activity
Lower Left:
Green indicates full-duplex; Off half-duplex
Depth: 4.8” [121.92 mm]
Height: 1" [25 mm]
Power Input 120 VAC @ 60 Hz. (Domestic)
100 – 240 VAC @ 50 Hz. (International)
Power Output 12 VDC, 0.5 Amp (Domestic)
12 VDC, 1.25 Amp (International)
Environment: Operating: 0°C to 50°C
Humidity: 5% to 95%
UL Listed & CSA Certified;
FCC Class A, EN55024, UL 60950, CE Mark
Warranty Lifetime

SBFTF10xx-10x
Stand-alone Fast Ethernet Media and Rate Converter
The SBFTF10xx-105 provides an interface between 10/100Base-TX

ports and 100Base-FX ports, allowing users to integrate fiber optic Ordering Information
cabling into 10/100Base-TX copper environments. SBFTF1011-105
Operating at Layer 2, this converter not only converts copper to fiber, 10/100Base-TX (RJ-45) [100 m/328 ft.]
but it also does Rate Conversion, converting 10/100 copper to 100Base [2 km/1.2 mi.] Link Budget: 11.0 dB
fiber.
SBFTF1013-105
SBFTF1014-105 10/100Base-TX (RJ-45) [100 m/328 ft.]
SBFTF1039-105
Features Specifications 10/100Base-TX (RJ-45) 100 m/328 ft.]
Data Rate 10 Mbps; 100 Mbps, Layer 2
• Auto-MDI/MDIX SBFTF1014-105
Filtering Addresses 1K MAC addresses 10/100Base-TX (RJ-45) [100 m/328 ft.]
• Link Pass Through Filtering & Forwarding 14,880 pps for Ethernet; Rate 148,800 pps for to 100Base-FX 1310nm single mode (SC)
Fast Ethernet [20 km/12.4 mi.] Link Budget: 16.0 dB
• Far-End-Fault (FEF) Detection SBFTF1019-105
RAM Buffers 512 KB
10/100Base-TX (RJ-45) [100 m/328 ft.]
• Automatic Link Restoration Extend Max Packet Size 2044 bytes untagged; 2048 bytes tagged to 100Base-FX 1310nm single mode (LC)
network distance up to 120km [20 km/12.4 mi.] Link Budget: 17.3 dB
Switches SW1 (TP): Auto-Negotiation On/Off
• Bridging devices will provide conversion SW2 (TP): Half or Full-duplex with Auto-Negotiation Off SBFTF1040-105
SW3 (TP): 10Mbps or 100 Mbps with Auto-Negotiation Off 10/100Base-TX (RJ-45) [100 m/328 ft.]
and integration solutions for half and
SW4 (Fiber): Half or Full-duplex to 100Base-X SFP Slot (empty)
full-duplex environments SW5: Link Pass Through On/Off
SW6: Far-End-Fault (FEF) On/Off
• 10 Mbps or 100 Mbps on TP port
Status LEDs PWR (Power): ON = connection to external power
• Half or full-duplex on all ports including FD (Fiber Duplex): ON=Full-duplex; Off=Half duplex SBFTF1029-105
fiber LNK/ACT (Fiber Link/Activity): ON=Link; 10/100Base-TX (RJ-45) [100 m/328 ft.]
Blinking=Activity to 100Base-FX 1310nm TX/1550nm RX single
CD (Copper Duplex): ON = Full-duplex; fiber single mode (SC) [20 km/12.4 mi.]
Off = Half-duplex Link Budget: 19.0 dB
LNK/ACT (Copper Link/Activity): ON = Link;
Blinking = Activity SBFTF1029-106
100 (Copper): Off = 10 Mbps; ON = 100 Mbps 10/100Base-TX (RJ-45) [100 m/328 ft.]to
100Base-FX 1550nm TX/1310nm RX single
Dimensions Width: 3.25” [82.55 mm] fiber single mode (SC) [20 km/12.4 mi.]
Depth: 4.8” [121.92 mm] Link Budget: 19.0 dB
Height: 1" [25 mm]
Power Consumption External AC/DC; 12 VDC, 0.8A min
Environment Operating: 0°C to 50°C SFP Modules
Humidity: 5% to 90% (non-condensing) Wide Input (24 - 60 VDC) Power Supplies
SPS-2460-PS
Compliance Safety: Wall Mount Power Supply: UL Listed;
FCC Class A, VCCI Class 1, CISPR22/EN55022 SPS-2460-SA
Class A, EN55024, EN61000, CE Mark Stand-Alone Power Supply
Warranty Lifetime
Mounting Options
E-MCR-05
12-slot Media Converter Rack
Power Supply Included RMS19-SA4-01

4-slot Media Converter Shelf
specific power supply, add the WMBD
extension from the list below to the end DIN Rail Bracket 5" [127 mm]
of the SKU; Ex: SBFTF1011-105-NA WMBD-F
-NA = Country Code DIN Rail Bracket (flat) 3.3” [84 mm]
-NA = North America
-LA = Latin America WMBL
-EU = Europe Wall Mount Bracket 4" [102 mm]
-UK = United Kingdom WMBV
-SA = South Africa
-JP = Japan Vertical Wall Mount Bracket 5" [127 mm]
-OZ = Australia
-BR = Brazil

IPOTW1052-111-LRT
Unmanaged IP Over 2-Wire Ethernet Extender
(1) 100Base-TX RJ-45 Port + (1) 2-Wire Terminal Block
Transition Networks IP Over 2-Wire Ethernet Extender provides the ability

to leverage existing 2-Wire cable infrastructure to extend the Ethernet Ordering Information
network to remote locations, such as light poles or traffic signal poles. *IPOTW1052-111-LRT
The extenders are a cost-effective alternative to running new Cat5/6 cable (1) 100Base-TX
and reducing implementation time. + (1) 2-Wire Terminal Block
These extenders are used as a pair of devices, with a local and remote Optional Accessories (sold separately)
device at opposite ends of the 2-Wire cable. The local and remote devices Industrial Power Supplies:
can each accept a 100Base-TX RJ-45 connection. The local and remote 25135
devices can communicate over non-UTP 24AWG wire lengths of up to Input: 85-264 VAC, 120-370 VDC
Output: 24VDC, .42A, 10 Watts
200M. The wide input power range allows the extenders to work with a (For use when required 12-48 VDC power is
variety of power sources to suit specific applications. not available)
*Note: Products must be purchased as a pair.
Standards IEEE 802.3p
• Auto MDI/MDIX
IEEE 802.3u
• Full/Half-Duplex IEEE 802.3x
Status LEDs Power, RJ-45 Link, 2-Wire Link
• Store-and-Forward Processing
• Extend Ethernet distances up to Depth: 2.75" [70 mm]
Height: 3.74” [95 mm]
200m on 24AWG 2-Wire Cable
• IP30 Enclosure
Power Input 12 - 48 VDC
• Single unit is user-selectable as Fault Relay 1A at 24 VDC capacity
Master or Slave Ingress Protection IP30
• 12~48 Power Input Environment Operating: -40°C to +70°C
• DIN Rail/Wall Mountable Humidity: 5% to 95% (non-condensing)
• Eliminates cost of running
CAT5/6 Cable
Compliance Safety: EN60950-1, FCC Part 15,
Immunity: EN61000-4-2, EN61000-4-3,
EN-61000-4-4, EN61000- 4-5, EN61000-4-6,
EN61000-4-8, EN61000-4-11,
IEC60068-2-32 (Free fall),
IEC60068-2-27 (Shock),
IEC60068-2-6 (Vibration)
Warranty Lifetime

SSRFB10xx-100
Stand-alone Fast Ethernet Remotely Managed NID
Ideal for both Enterprise and Service Provider applications where entry
level management information is needed on both the local and the remote Ordering Information
device. This management information is accessible through the local unit SSRFB1011-100
installed in a managed Point System™ Chassis as the remote stand-alone 10/100Base-TX (RJ-45) [100 m/328 ft.]
unit reports its current Operating status back to a local unit. to 100Base-FX 1300nm multimode ST
Devices should be used in pairs with the remotely managed stand-alone
SSRFB1013-100
unit used in conjunction with the managed chassis card CSRFB10xx-100. 10/100Base-TX (RJ-45) [100 m/328 ft.]
Applications include: integrate fiber into 10/100 copper environments, [2 km/1.2 mi.] Link Budget: 11.0 dB
remote management of stand-alone units report their status to local
SSRFB1014-100
SSRFB1013-100 managed unit, remote loopback assists in identifying network problems, 10/100Base-TX (RJ-45) [100 m/328 ft.]
and bandwidth control sets throughput to user’s requirements. to 100Base-FX 1310nm single mode (SC)
Features Specifications SSRFB1040-100

10/100Base-TX (RJ-45) [100 m/328 ft.]
Standards IEEE 802.3 to SFP slot (empty)
TS-1000 OAM v2
• Auto-MDI/MDIX Data Rate Copper: 10/100 Mbps Fiber: 100 Mbps Single Fiber Products
• Far-End-Fault (FEF) Filtering Addresses 1K MAC addresses
SSRFB1029-100
RAM Buffers 256K 10/100Base-TX (RJ-45) [100 m/328 ft.]
• Transparent Link Pass Through to 100Base-FX 1310nm TX/1550nm RX
Max Frame Size 1916 bytes untagged
Bi-Di single mode (SC) [20 km/12.4 mi.]
• Bandwidth Allocation 1914 bytes tagged
Switches SW1: TP Auto-Negotiation
• Loopback SW2: TP Duplex with Auto-Negotiation Off SSRFB1029-101
SW3: TP Speed with Auto-Negotiation Off 10/100Base-TX (RJ-45) [100 m/328 ft.]
• Last Gasp SW4: Fiber Duplex to 100Base-FX 1550nm TX/1310nm RX
SW5: Transparent Link Pass Through Bi-Di single mode (SC) [20 km/12.4 mi.]
• Remote Management SW6: Mode: Terminal or Center Link Budget: 19.0 dB
• Automatic Link Restore Status LEDs PWR (Power) SSRFB1029-102

TP Duplex/Link/Activity 10/100Base-TX (RJ-45) [100 m/328 ft.]
• Link Test TP 10 Mbps/100 Mbps to 100Base-FX 1310nm TX/1550nm RX
Fiber Link/Activity Bi-Di single mode (SC) [40 km/24.9 mi.]
Fiber Duplex Link Budget: 25.0 dB
Read Management Dimensions Width: 3.25” [82.55 mm]

Depth: 4.8” [121.92 mm]
SSRFB1029-103
10/100Base-TX (RJ-45) [100 m/328 ft.]
Features Height: 1" [25 mm]
Bi-Di single mode (SC) [40 km/24.9 mi.]
• Power Power Supply External AC/DC required; 12 VDC 1.25A Output;
120-240VAC input Optional Accessories (sold separately)
• Copper Link Status
Environment Operating: 0°C to 50°C SFP Modules
• Copper Speed Humidity: 5% to 90% (non-condensing)
Altitude: 0 – 10,000 ft. Wide Input (24 - 60 VDC) Power Supplies
• Copper Duplex Weight 2 lbs. [0.90 kg] SPS-2460-PS
• Fiber Link Status Compliance Safety: Wall Mount Power Supply: UL Listed and CSA certified
Regulatory: EN55022 Class A, EN55024, CE Mark SPS-2460-SA
• Fiber Duplex Warranty Lifetime Stand-Alone Power Supply
• Fiber Loopback Status

Mounting Options
E-MCR-05
Power Supply Included 12-Slot Media Converter Rack
To order the corresponding country RMS19-SA4-01
specific power supply, add the 4-Slot Media Converter Shelf
WMBL
of the SKU; Ex: SSRFB1011-100-NA Wall Mount Bracket 4" [102 mm]
-NA = Country Code
-NA = North America WMBV
-LA = Latin America Vertical Wall Mount Bracket 5" [127 mm]
-EU = Europe WMBD
-SA = South Africa DIN Rail Bracket 5" [127 mm]
-JP = Japan WMBD-F
-OZ = Australia DIN Rail Bracket (flat) 3.3” [84 mm]
-BR = Brazil

S2220 Series
Stand-alone Fast Ethernet Remotely Managed NID
10/100Base-TX to 100Base-FX with OAM/IP-Based Management

methods for secure delivery of Ethernet services for business and S2220-1011
mobile backhaul applications. With MEF 9, 14 and 21 certification 10/100/1000Base-T (RJ-45) [100 m]
the ION 2220 Series ensures you are compliant with the latest to 100Base-FX 1300nm multimode (ST)
standards. The ION 2220 Series is a product with advanced features
including – IEEE 802.3ah Link OAM, VLAN, QoS, SSH/SSL, jumbo S2220-1013
10/100/1000Base-T (RJ-45) [100 m]
frame support and bandwidth allocation. to 100Base-FX 1300nm multimode (SC)
S2220-1040
Applications include: Ethernet in the First Mile (EFM), Fiber-to-the- [2 km/1.2 mi.] Link Budget: 11.0 dB
Premises (FTTP), E-Line Services (EPL & EVPL), and Enterprise S2220-1014
10/100/1000Base-T (RJ-45) [100 m]
Markets. to 100Base-LX 1310nm single mode (SC)
Features Specifications S2220-1040

10/100/1000Base-T (RJ-45) [100 m]
Standards IEEE 802.3 to 100Base-X SFP Slot (empty)
• MEF 9, 14 and 21 certified
IEEE 802.3ah
• 802.3ah Link OAM IEEE 802.1P *Note all units feature USB port for local
IEEE 802.1Q management application.
• 10K Jumbo Frame Support Data Rate Copper: 10/100/1000 Mbps
Fiber: 100 Mbps
• Two selectable Remote
Filtering Addresses 8K MAC Addresses
Management modes:
Max Frame Size 10,240 bytes Power Supply Included
-- IP-Based Remote Management
Dimensions Width: 3.25” [82.55 mm] To order the corresponding country
-- In-Band (remote device managed by Depth: 6.5” [165 mm] specific power supply, add the
local peer) Height: 1" [25 mm]
Power Input 100-240 VAC, 1A of the SKU; Ex: S2220-1013-NA
• Auto-MDI/MDIX
Power Output 12 VDC, 1.25A -NA = Country Code
• Auto-Negotiation -NA = North America
Environment Operating: 0°C to 50°C -LA = Latin America
• Pause Humidity: 5% to 90% (non-condensing) -EU = Europe
• Transparent Link Pass Through Weight 2 lbs. [0.90 kg] -SA = South Africa
-JP = Japan
• Far-End-Fault (FEF) Compliance EN55022 class A, EN55024, UL60950, CE Mark -OZ = Australia
-BR = Brazil
Warranty Lifetime
• Remote Loopback
Features (Continued)
• IEEE 802.1p QoS packet classification
• DHCP client
• SNTP
• TFTP
• RADIUS client

SPOEB10xx-105
Stand-alone Fast Ethernet PoE Media Converter
10/100Base-TX PoE PSE to 100Base-FX
SPOEB10xx-105 is a 10/100 Ethernet copper to fiber PoE media
converter that enables enterprises to provide power to network devices Ordering Information
over the existing CAT5 data connection. SPOEB1040-105
Transition Networks’ AC powered PoE media converters combine data 10/100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-X SFP Slot (empty)
received over a fiber optic link with -48 VDC power; providing power
SPOEB1011-105
to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded 10/100Base-TX (RJ-45) [100 m/328 ft.]
twisted pair cable. The PoE converters are Power Sourcing Equipment to 100Base-FX 1300nm multimode (ST)
(PSE) and are fully compatible with Powered Devices (PD) that comply [2 km/1.2mi.] Link Budget: 11.0 dB
with the IEEE 802.3af: 2003 standard. The converters also include SPOEB1013-105
a PD signature sensing and power monitoring features per the IEEE 10/100Base-TX (RJ-45) [100 m/328 ft.]
SPOEB1039-105 802.3af standard. Other features include Over-Current Protection, [2 km/1.2mi.] Link Budget: 11.0dB
Under-Current Detection and Fault Protection Input.
SPOEB1039-105
This feature enhanced model offers the ability to enable/disable many 10/100Base-TX (RJ-45) [100 m/328 ft.]
of the features as well as force port capabilities. In addition, with the [2 km/1.2 mi.] Link Budget: 11.0 dB
PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power
output on the UTP port for 2 seconds to allow remote device to re-
initialize, also known as Powered Device Reset.
The PoE converter is fully compatible with devices that comply with the Mounting Options
IEEE 802.3af standard. The PoE converter is capable of inserting power WMBL
on data pairs or spare pair of the MDI. Wall Mount Bracket 4" [102 mm]
WMBV
Features Specifications WMBD

• External AC power supply RMS19-SA4-01
IEEE 802.3af
• IEEE 802.3af Power-over-Ethernet Max Frame Size 1600 bytes
Compatible Switches SW1: Auto-Negotiation On/Off (TP)
SW2: Speed TP: Force 10 Mbps or 100 Mbps (SW1 off)
• 48 VDC PSE Output Voltage SW3: Duplex TP: Force Half or Full-Duplex (SW1 off)
SW4: Duplex Fiber: Half or Full-Duplex Power Supply Included
• Signal Pair or Spare Pair Power Insertion SW5: Link Pass Through On/Off
SW6: PSE On/Off
• PD Detection Signature specific power supply, add the
SW7: PSE/LPT on/off
SW8: Data Pairs/Spare Pairs extension from the list below to the end
• Over-Current Protection & Under- of the SKU; Ex: SPOEB1040-105-NA
Current Status LEDs Power
Fiber Link, Activity, & Duplex -NA = Country Code
Detection -NA = North America
Copper Link, Activity, Speed, & Duplex
-LA = Latin America
• Powered Device Reset PoE Status
-EU = Europe
Dimensions Width: 3.25” [82.55 mm] -UK = United Kingdom
• Switch selectable features and port Depth: 4.8” [121.92 mm] -SA = South Africa
settings Height: 1" [25 mm] -JP = Japan
-OZ = Australia
• Minimum Load Sensing Power Consumption 20 Watts (max) -BR = Brazil
Power Supply External power supply: 90 – 250 VAC Input; 48VDC Output
• Fault Protection Input
• Auto-Negotiation Storage: -25° to +85°C
• Auto-MDI/MDIX Altitude: 0 – 10,000 ft.
Compliance EN55022:1994+A1:1996+A2:1997 Class A,
• Far-End-Fault (FEF) FCC Part 15 Subpart B, UL 1950
Warranty Lifetime

SISTF101x-211-LRT
Unmanaged Hardened Fast Ethernet Media Converter
(1) 10/100Base-TX Port + (1) 100Base-FX Port
The SISTF101x-211-LRT converter series contains simple “Plug-and-Play”
converters used at the edge of a hardened network to provide fast Ethernet Ordering Information
connections for devices in hazardous locations. Depending on the model, SISTF1011-211-LRT
these converters can provide multimode or single mode fiber connections (1) 10/100Base-TX (RJ-45) [100 m/328 ft.]
with SC or ST connectors for extended distance communications up to 30 to (1) 100Base-FX 1310nm multimode (ST)
[2 km/1.2mi.Link Budget: 11.0 dB
kilometers. These converters are Class 1, Div 2 Certified, have redundant input
power connections, and a fault alarm relay to ensure safe reliable operation in SISTF1013-211-LRT
(1) 10/100Base-T X (RJ-45) [100 m/328 ft.]
temperatures between -40°C and +75°C. to (1) 100Base-FX 1310nm multimode
Transition Networks’ hardened media converters are certified to operate (SC) [2 km/1.2 mi.] Link Budget: 11.0 dB
reliably in harsh environments such as those found on factory floors, outdoor SISTF1014-211-LRT
(1) 10/100Base-TX (RJ-45) [100 m/328 ft.]
enclosures or other hazardous environments. to (1) 100Base-FX 1310nm single mode (SC)
External AC/DC Power Supply

SPS-UA12DHT
Input: 90-264VAC
Output: 12 VDC, 1.3A, 18 Watts
25083
Input: 85-264VAC, 120-370VDC
Features Specifications Output: 10.8 ~ 13.2 VDC, 2A, 24 Watts
IEEE 802.3u
• Auto-MDI/MDIX IEEE 802.3x
Dip Switches 1: Enable/Disable Port Alarms
• Link Pass Through 2: Enable/Disable Link Pass Through
3: Full/Half-Duplex 100Base-FX
• DIN Rail Mounting and Wall 4: Converter/Switch Mode
Mount Brackets Included Status LEDs PWR (Power): ON = Unit has power connected
PWR 1 (Power): ON = primary power connected
• Dry Contact Relay Alarm Output
PWR 2 (Power): ON = backup power connected
• Dual Auto-Sensing Redundant DC Fault: ON = Power failure or port link failure
LNK/ACT (Ports 1 – 2): ON = Link;
Power Inputs Flashing = data transmitting
HDX/FDX (Ports 1 – 2): ON = Full duplex mode
• Media Converter Mode or Switch 10/100 (UTP): ON = 100 Mbps
Converter Mode
• Barrel connector interface cable Depth: 3.7” [95 mm]
included for connecting external Height: 5.5” [140 mm]
AC/DC power supply Power Consumption 3.36 Watts
Power Input 12 to 48 VDC, 0.2A-0.7A, redundant inputs with
• Extended operating temperature (-40°C reverse polarity protection; overload current
to 75°C) protection Additional barrel connector; SISTF1011-
211-LRT also supports 24 VAC (18~30 VAC)
• Reverse Polarity Protection
Fault Output Relay output contacts, 1A@24VDC load capacity
• Overload Current Protection Ingress Protection IP30
• Class 1, Div 2 Certified Environment Operating: -40°C to +75°C
Compliance Safety: UL 60950-1, UL508, CSA C22.2 no 60950
UL Class 1, Div 2 for hazardous environments, cUL
CISPR/EN55022 Class A, FCC Class A, CE Mark,
EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6,
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
Warranty Lifetime

S3100 Series
SFP to SFP for Data Rates from 100Mbps to 2.5 Gbps
This fiber to fiber converter is a protocol independent device that

supports data rates from 100Mbps up to 2.5 Gbps. It provides Ordering Information
reliable and cost-effective conversion between single mode and S3100-4040
multimode fiber, while also providing wavelength conversion in CWDM 100Mbps to 2.5Gbps fiber repeater with two
applications. As an SFP based device, this any-rate to similar-rate open SFP slots, any rate to same rate stand-
alone media converter
converter offers great application flexibility. Supported protocols, fiber
connectors, and transmission distances are determined by the SFP Optional Accessories (sold separately)
module used on the converter. SFP Modules
S3100-4040
SFP and SFP+ modules supported
Mounting Options
Features Specifications WMBL
Standards Multi-Source Agreement (MSA)
• Protocol Transparent WMBD
• Supports data rates from 100Mbps to Data Rates Protocol Independent
2.5Gbps 100Mbps to 2.5 Gbps E-MCR-05
Max Frame Size 16384 bytes Jumbo Frames Supported
• Any-rate to similar-rate conversion RMS19-SA4-01
Status LEDs PWR: ON (Green) = Power 4-Slot Media Converter Shelf
• SFP to SFP Fiber Repeater Port 1 Link: ON = Fiber Signal Detected
Port 2 Link: ON = Fiber Signal Detected
• Specific wavelength CWDM
Transponder Depth: 6.5” [165 mm]
Height 1" [25 mm] Power Supply Included
• Supported protocols: Fast Ethernet,
Gigabit Ethernet, SONET (OC-3/12/48), Power Consumption 2-3 Watts (based on the SFP modules used) To order the corresponding country
1 & 2 Gig Fiber Channel, 2.5G Power Supply External AC/DC required: 12VDC Output; 120-240VAC input specific power supply, add the
InfiniBand, FDDI, ESCON/SBCON Environment Operating: 0°C to 50°C of the SKU; Ex: S3100-4040-NA
• Link Pass Through Humidity: 5% to 95% (non-condensing) -NA = Country Code
Altitude: 0 – 10,000 ft. -NA = North America
• Automatic Link Restoration -LA = Latin America
Weight 2 lbs. [0.90 kg] -EU = Europe
MTBF Greater than 250,000 hours (MIL-HDBK-217F) -SA = South Africa
Greater than 687,000 hours (Bellcore) -JP = Japan
-OZ = Australia
-BR = Brazil
Warranty Lifetime

SFMFF1xxx-22x
1000Base-X or 1000Base Fiber Channel
Used individually or in pairs, this mode converter can extend 1000
Mbps Gigabit Ethernet or Fiber Channel signalsover single mode fiber
up to 125 km. SFMFF1313-220
1000Base-SX 850nm multimode (SC)
Convert 1000Base-SX ports on a Gigabit Ethernet switch to [62.5/125 µm fiber: 220 m/722 ft.] [50/125 µm
fiber: 550 m/1804 ft.] Link Budget 7.5 dB
1000Base-LX on a port-by-port basis to 1000Base-SX 850nm multimode (SC)
[62.5/125 µm fiber: 220 m/722 ft.] [50/125 µm
Ideal for campus area networks or other applications requiring the fiber: 550 m/1804 ft.] Link Budget 7.5 dB
SFMFF1313-220 distance advantages of single mode fiber
SFMFF1324-220
1000Base-SX 850nm multimode (SC)
[62.5/125 µm fiber: 220 m/722 ft.] [50/125 µm
fiber: 550 m/1804 ft.] Link Budget 7.0 dB
to 1000Base-LX 1310nm Extended multimode
Features Specifications (62.5/125 µm fiber only) (SC) [up to 2 km]
Standards IEEE 802.3 Link Budget: 7.0 dB
• Auto-Negotiation (1000Base-X ports)
ATM, OC-3 SFMFF1424-220
• Link Pass Through STM-1 1000Base-LX 1310nm single mode (SC)
HSTR [10km/6.2 mi.] Link Budget: 7.0 dB
• Pause FDDI to 1000Base-LX 1310nm Extended multimode
Fiber Optic Connectors Multimode: Min TX PWR: -10.0 dBm (62.5/125 µm fiber only) (SC) [up to 2 km]
• Automatic Link Restoration Max TX PWR: -4.0 dBm Link Budget: 7.0 dB
RX Sensitivity: -17.0 dBm SFMFF1314-220
• Protocol Transparency Max In PWR: 0.0 dBm 1000Base-SX 850nm multimode (SC)
Link Budget: 7.00 dB [62.5/125 µm fiber: 220 m/722 ft.] [50/125 µm
fiber: 550 m/1804 ft.] Link Budget: 7.0 dB
Single Mode: Min TX PWR: -13.0 dBm to 1000Base-LX 1310nm single mode (SC)
Max TX PWR: -3.0 dBm [10 km/6.2 mi.] Link Budget: 7.0 dB
RX Sensitivity: -20.0 dBm
Max In PWR: -3.0 dBm
Link Budget: 7.00 dB Single Fiber Products
Status LEDs Power: Lit for normal operation SFMFF1329-220
Port LKS (Single Mode fiber link): Steady LED indicates 1000Base-SX 850nm multimode (SC)
single mode fiber link [62.5/125 µm fiber: 220 m/722 ft.] [50/125 µm
Port LKM (Multimode fiber link): Steady LED indicates fiber: 550 m/1804 ft.] Link Budget: 7.0 dB
multimode fiber link to 1000Base-LX 1310nm TX/1550nm RX
Dimensions Width: 3.25” [82.55 mm] single fiber single mode (SC) [20 km/12.4 mi.]
Depth: 4.7” [119.38 mm] Link Budget: 13.0 dB
Height: 1" [25 mm] SFMFF1329-221
Power Supply External AC/DC required 12VDC, 0.5 A; unregulated; standard; 1000Base-SX 850nm multimode (SC)
Output 12VDC, 1.0 A, 12 watts; 120-240VAC input [62.5/125 µm fiber: 220 m/722 ft.] [50/125 µm
fiber: 550 m/1804 ft.] Link Budget: 7.0 dB
Environment Operating: 0°C to 50°C to 1000Base-LX 1550nm TX/1310nm RX
Humidity: 5% to 90% (non-condensing) single fiber single mode (SC) [20 km/12.4 mi.]
Altitude: 0 – 10,000 ft. Link Budget: 13.0 dB
Compliance Safety: Wall Mount Power Supply: UL listed and CSA certified
Regulatory: FCC Class A & B, CISPR/EN55022 Class A & B, Wide Input (24 - 60 VDC) Power Supplies
CE Mark
SPS-2460-PS
Warranty Lifetime Piggy Back Power Supply
SPS-2460-SA

Mounting Options
specific power supply, add the E-MCR-05
extension from the list below to the end 12-Slot Media Converter Rack
of the SKU; Ex: SFMFF1313-220-NA RMS19-SA4-01
-NA = Country Code 4-Slot Media Converter Shelf
-NA = North America WMBD
-LA = Latin America
-EU = Europe DIN Rail Bracket 5" [127 mm]
-UK = United Kingdom WMBD-F
-SA = South Africa DIN Rail Bracket (flat) 3.3” [84 mm]
-JP = Japan
-OZ = Australia WMBL
-BR = Brazil Wall Mount Bracket 4" [102 mm]
WMBV

SGETF10xx-110 Series
Stand-alone Gigabit Ethernet Media Converter
Migrate to Gigabit Ethernet in a cost-effective manner. Used in
conjunction with lower cost 1000Base-T switches, companies
can take advantage of the high bandwidth Gigabit Ethernet offers
SGETF1013-110
without all of the higher costs. Transition Networks 1000Base-T 1000Base-T (RJ-45) [100 m/328 ft.]
to SX/LX converters allow users to extend the bandwidth to those to 1000Base-SX 850nm multimode (SC)
users outside the reach of the 1000Base-T standard (up to 125 [62.5/125 µm fiber: 220 m/722 ft.] Link Bud-
get: 7.0 dB [50/125 µm fiber: 550 m/1804 ft.]
km). Link Budget: 7.0 dB
SGETF1024-110
1000Base-T (RJ-45) [100 m/328 ft.]
to 1000Base-SX 1300nm Extended multimode
SGETF1013-110 (62.5/125 µm fiber only) (SC) [2 km/1.2 mi.]
Link Budget: 7.0 dB
Features Specifications SGETF1039-110

1000Base-T (RJ-45) [100 m/328 ft.]
Standards IEEE 802.3ab to 1000Base-SX 850nm multimode (LC)
• Auto-MDI/MDIX
IEEE 802.3z (via TN-SFP-SX) [62.5/125 µm fiber: 220
• Copper & Fiber Auto-Negotiation 6-position Switch SW1: Remote Fiber Fault Detect (Down=Enabled) m/722 ft.] Link Budget: 8.0 dB [50/125 µm
SW2: Symmetric Pause fiber: 550 m/1804 ft.] Link Budget: 8.0 dB
• Transparent Link Pass Through SW3: Asymmetric Pause SGETF1014-110
SW4: Transparent Link Pass Through (UP=Enabled) 1000Base-T (RJ-45) [100 m/328 ft.]
• Automatic Link Restoration SW5: Fiber Auto-Negotiation (Down=Enabled) to 1000Base-LX 1310nm single mode (SC) [10
SW6: Loopback (Down=Enabled) km/6.2 mi.] Link Budget: 10.5 dB
• Pause
Status LEDs PWR (Power): Steady green LED indicates
SGETF1040-110
• Remote Fault Detect connection to external AC power
1000Base-T (RJ-45) [100 m/328 ft.]
RXF (Fiber receive): Flashing LED indicates
to SFP slot (empty)
reception of data on fiber link
LKF (Fiber link): Steady LED indicates fiber Single Fiber Products
link connection
RXC (Copper receive): Flashing LED indicates SGETF1029-110
reception of data on copper link 1000Base-T (RJ-45) [100 m/328 ft.]
LKC (Copper link): Steady LED indicates copper to 1000Base-LX 1310nm TX/1550nm RX
link connection single fiber single mode (SC) [20 km/12.4 mi.]
Depth: 4.8” [121.92 mm] SGETF1029-111
Height: 1" [25 mm] 1000Base-T (RJ-45) [100 m/328 ft.]
to 1000Base-LX 1550nm TX/1310nm RX
Power Supply External AC/DC required; 12 VDC, 0.8A min Output; single fiber single mode (SC) [20 km/12.4 mi.]
120-240VAC input Link Budget: 13.0 dB
Humidity: 5% to 95% (non-condensing) Optional Accessories (sold separately)
Altitude: 0 – 10,000 ft. SFP Modules
Compliance Safety: Wall Mount Power Supply: UL Listed, cUL Listed
(Canada); FCC Class A, CISPR22/EN55022 Class A, SPS-2460-PS
EN55024, EN61000, CE Mark Piggy Back Power Supply
Warranty Lifetime SPS-2460-SA
Mounting Options
E-MCR-05
Power Supply Included 12-Slot Media Converter Rack
To order the corresponding country RMS19-SA4-01
specific power supply, add the 4-Slot Media Converter Shelf
WMBD
of the SKU; Ex: SGETF1013-110-NA
-NA = Country Code
-NA = North America WMBD-F
-LA = Latin America DIN Rail Bracket (flat, small) 3.1” [79 mm]
-EU = Europe
WMBL
-SA = South Africa Wall Mount Bracket 4" [102 mm]
-JP = Japan WMBV
-OZ = Australia
-BR = Brazil

SGFEB10xx-x3x
Stand-alone Gigabit Ethernet Media and Rate Converter
SGFEB1040-130
The SGFEB provides a cost effective method for integrating 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment. to 100/1000Base-X SFP Slot (empty)
Deploying fiber into today’s networks provides the ability to transmit SGFEB1013-130
data over significantly longer distances than is possible on copper. 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
Fiber also protects your data from external sources of noise and [62.5/125 um: 220 m/722 ft.] [50/125 um: 550
SGFEB1013-130 interference, improving network performance. m/1804 ft.] Link Budget 7.5dB
SGFEB1040-330
Operating at Layer 2, this converter not only converts copper to fiber, SGFEB1039-130
it also does Rate conversion, converting 10/100/1000 copper to 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
to 1000Base-SX 850nm multimode (LC)
1000Base fiber. [62.5/125 um: 220 m/722 ft.] [50/125 um: 550
m/1804 ft.] Link Budget 8.0dB
Features Specifications SGFEB1014-130

10/100/1000Base-T (RJ-45) [100 m/328 ft.] to
Standards IEEE 802.3 1000Base-LX 1310nm single mode (SC) [10
• Auto Negotiation
IEEE 802.3ab km/6.2 mi.] Link Budget 10.5dB
• Auto-MDI/MDIX IEEE 802.3u
IEEE 802.3z SGFEB1024-130
IEEE 802.3az 10/100/1000Base-T (RJ-45) [100 m/328ft.] to
• Link Pass Through 1000Base-SX 1310nm Extended multimode
Data Rates Copper: 10/100/1000 Mbps (62.5/125mm fiber only) (SC) [up to 2 km]
• Far End Fault (FEF) Fiber: 1000Mbps, 100Mbps also supported via SFP port Link Budget 7.0dB
• Remote Fault Detect Filtering Addresses 8k MAC Addresses SGFEB1019-130
Max Frame Size 10,260 byte Jumbo Frames 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
• Provides rate conversion while also to 1000Base-LX 1310nm single mode (LC) [10
increasing transmission distances Dip Switches Two Port Models km/6.2 mi.] Link Budget 10.5dB
Switch 1: TP1 - Auto-Negotiation Enable / Disable
• Supports multimode or single mode Switch 2: TP1 – Force 100Mbps or 10Mbps with SGFEB1040-230
switch 1 disabled (1) Port 10/100/1000Base-T (RJ-45) [100
fiber Switch 3: TP1 – Force Full or Half-Duplex with m/328 ft.] to (2) Ports 100/1000Base-X SFP
switch 1 disabled Slot (empty)
• Versions available with fixed SC or LC Switch 4: Link Pass Through Enable / Disable
optics, as well as modular SFP optics Switch 5 & 6: Controls the Fiber SFP port for SGFEB1040-330
1000M, 100M, or SGMII (2) Port 10/100/1000Base-T (RJ-45) [100
• Long haul transmission distances Multiport Models with additional 4 position dip-switch: m/328 ft.] to (2) Ports 100/1000Base-X SFP
are supported with a variety of SFP Switch 1 & 2: Controls the 2nd Fiber SFP port for Slot (empty)
modules 1000M, 100M, or SGMII
Switch 3 & 4: Fiber Redundancy Enable/Disable, Single Fiber Products
• SFP ports support dual speeds: Revertive Mode, and Fiber P2/P3 blocking
100/1000/SGMII SGFEB1029-130
Status LEDs PWR (Power): On = Power is provided to converter 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
LACT (Fiber Link/Activity): On = Link, to 1000Base-LX 1310nm TX/1550nm RX single
• Multiport versions provide 3 or 4 Blink = Activity mode (SC) [20 km/12.4 mi.] Link Budget
port switch functionality or provide RJ-45 Upper Left (TPLink/Activity/Duplex): 13.0dB
redundant fiber links Green = Link Full-Duplex, Blink = Activity,
Amber = Link Half-Duplex, Blink = Activity SGFEB1029-131
• Supports IEEE 802.3az Energy Efficient RJ-45 Upper Right (Speed): Green = 1000Mbps, 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
Ethernet Amber = 100Mbps, Off = 10Mbps to 1000Base-LX 1550nm TX/1310nm RX single
mode (SC) [20 km/12.4 mi.] Link Budget
13.0dB
Depth: 4.8” [121.92 mm]
Height: 1" [25 mm]
SFP Modules
Power Input 7.5 to 24 VDC, Provided by wide input AC Wall Mount Adapter Supports 100Mbps and 1000Mbps fiber SFPs
Environment Operating: 0°C to 50°C DC Power Supply
Storage: -15°C to 65° C SPS-2460-SA or SPS-2460-PS: wide input 24 –
Humidity: 5% to 95% (non-condensing) 60 VDC power supply
Weight 2 lbs. [0.90 kg] Mounting options
Compliance EN55022 Class A, EN55024, FCC Class A, CE Mark
E-MCR-05
Safety: Wall Mounted Power Supply: UL Listed, UL60950 and
12 Slot Powered Media Converter Rack
CSA Certified
Warranty Lifetime RMS19-SA4-01
WMBL
Power Supply Included Wall Mount Bracket
To order the corresponding country specific power supply, add the
WMBD
extension from the list below to the end of the SKU
DIN Rail Mount Bracket
Ex: SGFEB1040-130-NA
-NA = Country Code
NA = North America, LA = Latin America, EU = Europe, UK = United
Kingdom, SA = South Africa, JP = Japan, OZ = Australia, BR = Brazil

SGPOE10xx-1x0
Stand-alone Gigabit Ethernet PoE Media Converter
10/100/1000Base-T PoE PSE to 1000Base-X
Enables enterprises to provide power to network devices over the
existing CAT5 data connection. Ordering Information
Transition Networks' AC powered PoE media converters combine data SGPOE1013-100
received over a fiber optic link with -48 VDC power; providing power to 10/100/1000Base-T (RJ-45)
[100 m/328 ft.]
Data Terminal Equipment (DTE) Powered Devices (PD) over unshielded to 1000Base-SX 850nm multimode (SC)
twisted pair cable. The PoE converters are Power Sourcing Equipment [62.5/125 µm: 220 m/722 ft.] Link Budget: 8.0
(PSE) and are fully compatible with Powered Devices (PD) that comply dB [50/125 µm: 550 m/1804 ft.] Link Budget:
8.0 dB
with the IEEE 802.3af: 2003 standard. The converters also includes
SGPOE1040-110 a PD signature sensing and power monitoring feature per the IEEE SGPOE1039-100
10/100/1000Base-T (RJ-45)
802.3af standard. [100 m/328 ft.]
to 1000Base-SX 850nm multimode (LC)
This feature enhanced model offers the ability to enable/disable many [62.5/125 µm: 220 m/722 ft.] Link Budget: 8.0
of the features as well as force port capabilities (see switch section dB [50/125 µm: 550 m/1804 ft.] Link Budget:
under Specifications). 8.0 dB
SGPOE1040-100
In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
disable PSE power output on the UTP port for 2 seconds to allow to 100/1000Base-X SFP Slot (empty)
remote device to re-initialize, also known as Powered Device Reset. SGPOE1040-110
10/100/1000Base-T (RJ-45) [100 m/328 ft.]
The PoE converter is fully compatible with devices that comply with the to (2) 100/1000Base-X SFP slots (empty)
IEEE 802.3af standard as well as select legacy PDs. The PoE converter
is capable of inserting power on data mode A or mode B pairs of the Optional Accessories (sold separately)
MDI. SFP Modules
Features Specifications Mounting Options

Standards IEEE 802.3 WMBD
• SFP ports support either 100Base or DIN Rail Mount Bracket 5" [127 mm]
IEEE 802.3af
1000Base fiber
MAC Addresses 8K WMBL
• Redundant SFP port option Wall Mount Bracket 4" [102 mm]
Max Packet Size 1632 bytes untagged
1628 bytes tagged
• IEEE 802.3af Power-over-Ethernet
Compatible Switches SW1: Auto-Negotiation TP On/Off
SW2: Speed TP: Force 10 Mbps or 100 Mbps (SW1 off)
• 48 VDC PSE Output Voltage SW3: Duplex TP: Force Half or Full-Duplex (SW1 off)
SW4: Duplex Fiber: Half or Full-Duplex
• Mode A or Mode B Pairs Power Insertion SW5: Auto-MDI/MDIX On/Off To order the corresponding country
SW6: PSE On/Off specific power supply, add the
• PD Detection Signature SW7: PSE/LPT on/off extension from the list below to the end
SW8: Unused of the SKU; Ex: SGPOE1013-100-NA
• PoE Legacy Detect for non-IEEE 802.3af Dimensions Width: 4.4” [112 mm] -NA = Country Code
compatible Powered Devices (PD) Depth: 5.1” [129 mm] -NA = North America
Height: 1" [25 mm] -LA = Latin America
• Over-Current Protection -EU = Europe
Power Consumption 20 Watts (max) -UK = United Kingdom
• Under-Current Detection Power Supply External AC/DC required; 48 VDC 0.67A Output; -SA = South Africa
90 – 250VAC external power supply input -JP = Japan
• Powered Device Reset -OZ = Australia
Environment Operating: 0°C to 40°C -BR = Brazil
• Minimum Load Sensing Storage: -25°C to 85°C
• Fault Protection Input Altitude: 0 – 10,000 ft.
Compliance EN55022:1994+A1:1996+A2:1997 Class A,
• Auto-MDI/MDIX FCC Part 15 Subpart B, UL 1950
• Link Pass Through available on Warranty Lifetime

SGPOE10xx-100
• External AC power supply

SISTG10xx-211-LRT
Unmanaged Hardened Gigabit Ethernet
Media Converter
(1) 10/100/1000Base-T Port + (1) 1000Base-X Port
The SISTG10xx-211-LRT converter series contains simple “Plug-and-Play” SISTG1013-211-LRT
10/100/1000Base-T (RJ-45) [100 m/328 ft.]
converters used at the edge of a hardened network to provide Gigabit Ethernet to 1000Base-SX 850nm multimode (SC)
connections for devices in challenging locations. Depending on the model, these [62.5/125 µm: 220 m/722 ft.]
converters can provide multimode or single mode fiber connections with SC Link Budget:8.5 dB
[50/125µm: 550 m/1804 ft.]
connectors for extended distance communications up to 10 kilometers. The SFP Link Budget: 8.5 dB
model provides the ultimate flexibility to choose the appropriate SFP module to
SISTG1014-211-LRT
match your communication distance needs. These converters have redundant 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
input power connections, and a fault alarm relay to ensure safe reliable to 1000Base-LX 1310nm single mode (SC)
operation in temperatures between -40°C and +75°C. [9/125µm: 10 km/6.2 mi.]
Transition Networks’ hardened media converters are certified to operate reliably SISTG1040-211-LRT
in harsh environments such as those found on factory floors, outdoor enclosures 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
or other challenging environments. to 1000Base-X SFP slot (empty)
SISTG1040-211-LRT Optional Accessories (sold separately)
External AC/DC Power Supply

SISTG101x-211-LRT SPS-UA12DHT
Input: 90-264VAC
Output: 12 VDC, 1.3A, 18 Watts
Features Specifications 25083
Standards IEEE 802.3 Input: 85-264VAC, 120-370VDC
• Auto-Negotiation IEEE 802.3ab Output: 10.8 ~ 13.2 VDC, 2A, 24 Watts
IEEE 802.3u
• Auto-MDI/MDIX IEEE 802.3x
IEEE 802.3z
Data Rate Copper: 10/100/1000 Mbps Fiber: 1000 Mbps
• Extended operating temperature (-40°C SFP: 1000 Mbps
to 75°C) Dip Switches 1: Enable/Disable Power Alarm
2: Enable/Disable Link Pass Through
• Dry Contact Relay Alarm Output
Status LEDs PWR 1 (Power): ON = primary power connected
• Dual, Redundant, 12-48 VDC Power PWR 2 (Power): ON = backup power connected
FAULT: ON = power input failure on PWR1 or PWR2
Inputs 1000M (port 1): ON = Linked at 1000 Mbps LNK/
ACT (ports 1-2): ON = Link; FLASHING = data
• Reverse Polarity Power Input Protection transmitting
• Overload Current Protection Dimensions Width: 1.2” [30 mm]
Depth: 3.74” [95 mm]
• DIN Rail Mounting and Wall Mount Height: 5.51” [140 mm]
Brackets Included Power Consumption 5.18 Watts (SISTG1013)
5.30 Watts (SISTG1014)
• Barrel connector interface cable 5.28 Watts (SISTG1040)
included for connecting external AC/DC
Power Input 12 to 48 VDC, 0.2A-0.5A, redundant inputs with
power supply reverse polarity protection; Additional barrel
connector
• Class 1, Div 2 Certified
Fault Output Relay output contacts, 1A@24VDC load capacity
• Provides Dip Switch for full/half-duplex
Ingress Protection IP30
• Jumbo Frame: 9K bytes Environment Operating: -40°C to +75°C
MTBF 515,600 hours (SISTG1040-211-LRT)
252,300 hours (SISTG101x-211-LRT)
Compliance Safety: UL 60950-1, UL508, CSA C22.2 no 60950
UL Class 1, Div 2 for hazardous environments, cUL
CISPR/EN55022 Class A, FCC Class A, CE Mark,
EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
Warranty Lifetime

S3220 Series
Stand-alone Gigabit Ethernet Remotely Managed NID

methods for secure delivery of Ethernet services for business and S3220-1013
10/100/1000Base-T (RJ-45) [100 m]
mobile backhaul applications. With MEF 9, 14 and 21 certification the to 1000Base-SX 850nm multimode (SC)
ION 3220 Series ensures you are compliant with the latest standards. [62.5/125 µm fiber: 220 m/722 ft.] [50/125
The ION 3220 Series is a 10/100/1000Mbps product with advanced µm fiber: 550 m/1804 ft.] Link Budget: 8.5 dB
features including – IEEE 802.3ah Link OAM, VLAN, QoS, SSH/SSL, S3220-1014
jumbo frame support and bandwidth allocation. 10/100/1000Base-T (RJ-45) [100 m]
to 1000Base-LX 1310nm single mode (SC)
S3220-1040 Applications include: Ethernet in the First Mile (EFM), Fiber to the Premises [10 km/6.2 mi.] Link Budget: 10.5 dB
(FTTP), E-Line Services (EPL & EVPL), and Enterprise Markets. *S3220-1040
Features 10/100/1000Base-T (RJ-45) [100 m]
• MEF 9, 14 and 21 certified Specifications to (1) 100/1000Base-X Open SFP Slot
Standards IEEE 802.3 *S3221-1040

• 802.3ah Link OAM 10/100/1000Base-T (RJ-45) [100 m]
IEEE 802.3ah
IEEE 802.1P to (2) 100/1000Base-X Open SFP Slot
• 10K Jumbo Frame Support
IEEE 802.1Q *S3221-1040-T
• Two selectable Remote Management 10/100/1000Base-T (RJ-45) [100 m]
modes: to (2) 100/1000Base-x Open SFP Slots,
Fiber: 1000 Mbps
-- IP-Based Remote Management Extended Operating Temp Range
-- In-Band (remote device managed by Max Frame Size 10,240 bytes
local peer) Optional Accessories (sold separately)
• Auto-MDI/MDIX Depth: 6.5” [165 mm] SFP Modules
Height: 1" [25 mm]
• Pause
Power Input 100-240 VAC,1A
Mounting Options
• Transparent Link Pass Through WMBL
Environment Operating: 0°C to +50°C (S322x-10xx) Wall Mount Bracket 4" [102 mm]
• Far-End-Fault (FEF) Operating: -40°C to +65°C (S3221-1040-T)
Storage: -25° to +85°C (S322x-10xx) WMBD
• Remote Loopback Storage: -40° to +85°C (S3221-1040-T) DIN Rail Bracket 5" [127 mm]
• Field Upgradeable Firmware Altitude: 0 – 10,000 ft. Note: all units feature USB port for local
management application.
• IEEE 802.1p QoS packet classification Weight 2 lbs. [0.90 kg]
• IPv4 IP TOS, DiffServ and IPv6 traffic Compliance EN55022 Class A, EN55024, UL60950, CE Mark *S3220-1040, S3221-1040, and
class QoS classification S3221-1040-T have SGMII support for use with
Warranty Lifetime
10/100/1000Base-T copper SFPs.
tagging with 4096 VIDs S3221-1040-T must use extended temperature
SFP modules in order to meet the -40° to +65°C
• DHCP client operating temperature range.
• SNTP
• TFTP
• RADIUS client
• Bandwidth profiling specific power supply, add the
• DMI Optical Management of the SKU; Ex: S3220-1013-NA
• Cable diagnostic function for copper -NA = Country Code
ports -NA = North America
-LA = Latin America
• SSH -EU = Europe
• Telnet -SA = South Africa
-JP = Japan
• Command Line Interface (CLI) -OZ = Australia
-BR = Brazil
• Web management
• Management VLAN

S3230 Series
Stand-alone Gigabit Ethernet Remotely Managed NID
The ION 3230 Series of Network Interface Devices (NIDs) are

multi-service NIDs that provide SLA-assurance and advanced fault Ordering Information
management that is compliant with MEF and IEEE standards. The ION *S3230-1040
3230 Series are designed for business Ethernet and mobile backhaul 10/100/1000Base-T (RJ-45) [100 m]
deployments. The ION S3230 Series are MEF 9, 14 and 21 certified. to (1) 100/1000Base-X SFP Slot (empty)
The ION 3230 Series is a 10/100/1000Mbps product with advanced *S3231-1040
features including – IEEE 802.1ag Service OAM, IEEE 802.3ah Link 10/100/1000Base-T (RJ-45) [100 m]
to (2) 100/1000Base-X SFP Slots (empty)
S3231-1040 OAM, ITU Y.1731 Performance Monitoring, VLAN, QoS, SSH/SSL, jumbo
frame support and bandwidth allocation. Optional Accessories (sold separately)
Features Applications include: Ethernet in the First Mile (EFM), Fiber to the Premises SFP Modules
• MEF 9, 14 and 21 certified (FTTP), E-Line Services (EPL & EVPL), and Enterprise Markets.
Mounting Options
• 802.3ah Link OAM
Specifications WMBL
• ITU Y.1731 Standards IEEE 802.3 Wall Mount Bracket 4" [102 mm]
IEEE 802.3ah
• 802.1ag Service OAM
IEEE 802.3ag Note: all units feature USB port for local
• 10K Jumbo Frame Support IEEE 802.1P management application.
IEEE 802.1Q
• Two selectable Remote Management modes: *S3230-1040 and S3231-1040 have SGMII
-- IP-Based Remote Management Fiber: 1000 Mbps support for use with 10/100/1000Base-T
copper SFPs.
-- In-Band (remote device managed by local
peer) Max Frame Size 10,240 bytes
Depth: 6.5” [165 mm] Power Supply Included
• Auto-Negotiation Height: 1" [25 mm]
• Pause Power Input 100-240 VAC,1A specific power supply, add the
• Transparent Link Pass Through of the SKU; Ex: S3230-1040-NA
• Far-End-Fault (FEF) Storage: -25°C to 85°C -NA = Country Code
Humidity: 5% to 95% (non-condensing) -NA = North America
• Remote Loopback -LA = Latin America
Altitude: 0 – 10,000 ft. -EU = Europe
• Field Upgradeable Firmware Weight 2 lbs. [0.90 kg] -UK = United Kingdom
-SA = South Africa
• IEEE 802.1p QoS packet classification Compliance EN55022 Class A, EN55024, UL60950, CE Mark -JP = Japan
-OZ = Australia
• IPv4 IP TOS, DiffServ and IPv6 traffic Warranty Lifetime -BR = Brazil
• DHCP client
• SNTP
• TFTP
• RADIUS client
• Cable diagnostic function for copper ports
• SSH
• Telnet
• Web management
• Management VLAN

S3290 Series
Remotely Managed NID with Built-in Traffic Generator
S3290-24
(2) 10/100/1000Mbps RJ-45 ports with
(4) 100/1000Mbps SFP ports
S3290-42
(4) 10/100/1000Mbps RJ-45 ports with
(2) 100/1000Mbps SFP ports
Optional Accessories
25132
Optional Power Supply supporting an
operating environment of -30°C to 70°C
S3290-RPS
Isolated Wide Input 20W Power Supply
Assembly
• Any port can be network (NNI) or client Standards IEEE 802.3
(UNI) IEEE 802.3u WMBL
IEEE 802.3z Wall Mount Bracket Long Kit
• MPLS-TP IEEE 802.3ab
WMBD
IEEE 802.3x
• SNMP v1, v2c, and v3 DIN Rail Vertical Mount Kit
IEEE 802.3ad
IEEE 802.1p S3290-RM-BRKT
• IPv6 and IPv4 support IEEE 802.1Q Single Rack Mount Bracket for one S3290-xx;
• VLAN (802.1Q) in-Q (C-Tag / S-Tag) IEEE 802.1w The use of two brackets allows two S3290
IEEE 802.1s unites to be installed in 1U of rack space
• RMON and SYSLOG IEEE 802.1x
IEEE 802.1AB RMS19-NID2-01
• OAM Support: IEEE 802.3ah 2-Slot S3290 shelf, includes 4 device
-- IEEE 802.3ah Link OAM. IEEE 802.1ag brackets and reversible rack mount ears
IEEE 1588-2008 (v2)
-- IEEE 802.1ag Service OAM and
ITU Y.1731 PM
-- ITU Y.1731 Performance Monitoring
• Protection:
Data Rate Copper: 10/100/1000 Mbps (RJ-45)
SFP (empty): 100/1000 Mbps or SGMII
Software Features
-- ITU G.8032/G.8031 Max MAC Address 8K Continued
-- IEEE RSTP, MSTP Max VLANs 4K
• IEEE 1588v2 Max Frame Size 10,000 bytes (10K)
• DC or AC power input Status LEDs Power, Port Activity, Port Duplex

• Jumbo Frame Support (10K) Depth: 6.5” [165.1 mm]
• Fan-less design Height: 1” [25.4 mm]
Power Input AC: 12 VDC via barrel connector using 100-250VAC
• Wire speed loopbacks The following AC adapters are available:
• RFC 2544 and Y.1564 Traffic Generation Power Supply 25025 temperature range: 0°C to 30°C
and Reports (included with product)
Power Supply 25132 temperature range: -30°C to 70°C (sold
• SLA Enforcement Performance statistics separately)
DC: 21-60VDC via terminal block
Environment Operating: -20°C to +65°C
Software Features Storage: -40°C to +85°C

• E-LINE (EPL and EVPL) Compliance UL listed, CE, EN55022 Class A

E-LAN (EP-LAN and EVP-LAN) Warranty 5 Year Hardware
E-ACCESS (ACCESS EPL and EVPL)
E-TREE (EP-TREE and EVP-TREE)
• UNI or NNI configuration To order the corresponding country
• TOS/DiffServ extension from the list below to the end
of the SKU; Ex: S3290-24-NA
• Quality of Service (802.1p): 8 queues;
strict priority and WRR, shaping, -NA = Country Code
policing, P-bit and DSCP -NA = North America
-LA = Latin America
-EU = Europe
• Management via Converge™ EMS, CLI, -UK = United Kingdom
Web, SSH/SSL and SNMP -SA = South Africa
(V1, V2, &V3) -JP = Japan
-OZ = Australia
-BR = Brazil

EO2PSE4052-111 & EO2PD4052-111
Ethernet Over 2-Wire Extender With PoE+
(1) 10/100/1000Base RJ-45/SFP Combo Port + (1) 1000Base-T RJ-45
Port or 2-Wire Terminal Block
Transition Networks Ethernet Over 2-Wire Extender With PoE+ provides
the ability to quickly and easily upgrade Ethernet networks with modern Ordering Information
PoE powered IP devices without the need to replace the existing *EO2PSE4052-111 (Local)
copper wire infrastructure. The extenders leverage existing 18-24 AWG (1) 10/100/1000Base-T RJ-45 or
(1) 100/1000Base-X SFP Combo Port and
unshielded twisted pair (CAT 5, CAT 3 and other 2-wire phone wire) (1) 10/100/1000Base RJ-45 or
cabling infrastructure to extend the Ethernet network at near Gigabit 2-Wire Terminal Block Combo Port
speeds and provide data and power to IP devices in remote locations, *EO2PD4052-111 (Remote)
saving time and money over installing new cable. (1) 10/100/1000Base-T RJ-45 or
2-Wire Terminal Block Combo Port and
The Ethernet Over 2-Wire Extenders With PoE+ are used in pairs, with a (1) 10/100/1000Base-T IEEE 802.3af/at or
local or remote device at opposite ends of the copper link. The extenders provide flexibility for either copper or fiber (1) 100/1000Base-X SFP Combo Port
Ethernet connections. The Local device offers a 10/100/1000Base-T RJ-45 and 100/1000Base-X open SFP combo
*Note: Product must be used in pairs. A properly
port and a RJ-45 or 2-wire terminal block connection to provide safety extra low voltage (SELV) power over 2-wire isolated power source is required for each
to the Remote device. The Remote device receives power through the RJ-45 or 2-wire terminal block connection Local unit and an external power supply is
optional for Remote units depending on power
and provides a 10/100/1000Base-T RJ-45 output with PoE+ power or a 100/1000Base-X open SFP combo port requirements.
connection for IP cameras, wireless access points or other PoE powered end devices.
Industrial Power Supplies (sold separately)
Power for the Local device can be supplied through a properly isolated +48VDC power source or through the
designated 90 Watt power adapter. Power for the Remote device can be supplied with PoE from the Local unit, 25148 (Power Adapter)
90 ~ 264 VAC; 127 ~ 370 VDC
through a properly isolated +48VDC power source, or through the designated power adapter for providing redundant (Country specific power cord included)
power or for additional power requirements at the Remote device.
The Ethernet Over 2-Wire Extenders With PoE+ are supplied with a web GUI, which allows password-protected Mounting Options (sold separately)
access to various configuration options of both the Local and Remote devices through a single IP address. It also WMBL
allows easy upgrades to firmware. Wall Mount Bracket 4" [102 mm]
WMBD
Features Specifications WMBD-F
Standards IEEE 802.1p DIN Rail Bracket (flat) 3.3” [82 mm]
• Copper or fiber combo Ethernet port
IEEE 802.1Q WMBV
• IEEE 802.3af/at compliant Remote PoE+ IEEE 802.3 Vertical Wall Mount Bracket 5" [127 mm]
IEEE 802.3ab
port for powering cameras or other IEEE 802.3af/at RMS19-SA4-02
remote devices IEEE 802.3az 4-Slot Media Converter Shelf, includes 4
IEEE 802.3u brackets and 3 slot blanks
• Full PoE+ at 335-1,500 ft. over a single IEEE 802.3x
pair or 1,500-6,800 ft. over multiple IEEE 802.3z
pairs* (dependent on cable type) Ports Ethernet: 10/100/1000Base-T RJ-45 or
100/1000Base-X SFP Combo
Features Continued
• Half-Gigabit Ethernet speeds over UTP 2-Wire: 10/100/1000Base-T RJ-45
cable at distances of 660 feet (200m) or 2-wire terminal block
or Fast Ethernet speeds at 2000 feet PoE: 10/100/1000Base-T RJ-45 PoE+
(610m) (dependent on wire gauge*) Status LEDs Power, Copper Power, Copper ACT, Copper Security,
Combo Port Link/ACT, PoE+
• Proprietary SELV classification prevents
unintended power delivery to non- Dimensions Width: 3.25” [82.5 mm]
Depth: 5.38" [136.7 mm]
Transition Networks devices Height: 1.25" [31.75 mm]
• Power monitoring Power Consumption 45 Watts (max)
Power Input 48 VDC
• Auto Power Reset (APR) and power-
saving mode Ingress Protection IP30
Environment Operating: 0°C to +65°C
• Web browser configurable (Industrial +85°C SFP modules must be used
above 50°C ambient temperature)
• Plug-and-Play installation Storage: -40°C to 85°C
• Field upgradeable firmware Altitude: 0 – 10,000 ft.
*Minimum distance stated is 24 AWG cable DC Weight 1.05 lbs. [0.48 kg]
resistance of 29.9 ohm per 1000 ft. Cable with Compliance Safety: External Power Supply: CE Mark;
less DC resistance will increase distance. Use Emissions: FCC Part 15, CISPR22/EN55022
Class A; Immunity: EN55024
of multiple pairs vs a single pair will increase
Warranty 5 Years
distance and available power. To determine
power distance for specific cable types, refer to
online calculator.

EOCPSE4020-110 & EOCPD4020-110
Ethernet Over Coax Extender With PoE+
(1) 100/1000Base RJ-45/SFP Combo Port + (1) 1000Base Coax BNC Port
Transition Networks Ethernet Over Coax Extender With PoE+ provides

the ability to quickly and easily upgrade older analog surveillance Ordering Information
systems with modern PoE powered IP video cameras without the *EOCPSE4020-110 (Local)
need to replace the wiring infrastructure. These products leverage (1) 10/100/1000Base-T Port
the existing CCTV 75 ohm coax infrastructure to extend the Ethernet or (1) 100/1000Base-X SFP Combo Port
+ (1) 1000Base BNC Port
network and provide power to remote camera locations, saving time
and money over installing new cable. These extenders communicate *EOCPD4020-110 (Remote)
(1) 10/100/1000Base-T PoE+ Port IEEE
at near Gigabit speeds and can also be used in other applications 802.3af/at
besides surveillance to extend Ethernet networks over an existing coax or (1) 100/1000Base-X SFP Combo Port
infrastructure. + (1) 1000Base BNC Port
The Ethernet Over Coax Extenders with PoE+ are used as a pair of devices, with a local or remote device at opposite *Note: Product must be used in pairs. A properly
isolated power source is required for each
ends of the coax cable. The extenders provide much flexibility for either copper or fiber Ethernet connections. The Local unit and an external power supply is
Local device offers both a 10/100/1000Base-T RJ-45 and 100/1000Base-X SFP connection, and provides a Gigabit optional for Remote units depending on power
BNC connection with power over coax to the Remote device. The Remote device receives power over coax through requirements.
Industrial Power Supplies (sold separately)
the BNC connection and provides both a 100/1000Base-X SFP and a 10/100/1000Base-T RJ-45 connector output
with PoE+ power for IP cameras, wireless access points or other PoE powered end devices. Power for the Local 25148 (Power Adapter)
90 ~ 264 VAC; 127 ~ 370 VDC
device can be supplied through a properly isolated +48VDC power source or through the designated 90 Watt power (Country specific power cord included)
adapter. The designated power adapter is optional for providing redundant power at the Remote device.
The Ethernet Over Coax Extenders With PoE+ are supplied with a web GUI, which allows password-protected access Mounting Options (sold separately)
to various configuration options of both the Local and Remote devices through a single IP address. It also allows easy WMBL
upgrades to firmware. Wall Mount Bracket 4" [102 mm]
WMBD
Features Specifications DIN Rail Bracket 5" [127 mm]

WMBD-F
Standards IEEE 802.1p DIN Rail Bracket (flat) 3.3” [82 mm]
• Copper or fiber combo Ethernet port
IEEE 802.1Q
IEEE 802.3 WMBV
• Remote PoE+ Port IEEE 802.3at for
IEEE 802.3ab Vertical Wall Mount Bracket 5" [127 mm]
powering cameras or other remote IEEE 802.3af/at
devices RMS19-SA4-02
IEEE 802.3az
4-Slot Media Converter Shelf, includes 4
IEEE 802.3u
• Full PoE+ at 400 ft. or less* brackets and 3 slot blanks
IEEE 802.3x
(dependent on cable type) IEEE 802.3z
• Coax distance in excess of 1000 ft. at Ports Ethernet: 10/100/1000Base-T RJ-45 or

near Gigabit speeds or 2000 ft. at Fast
100/1000Base-X SFP Combo
Coax: 1000Base BNC Features Continued
Ethernet speeds PoE: 10/100/1000Base-T RJ-45 PoE+
(dependent on remote power Status LEDs Power, Coax Power, Coax ACT,
requirements) Coax Security, Combo Port Link/ACT, PoE+
• Proprietary coax end device Dimensions Width: 3.25” [82.5 mm]
classification prevents unintended Depth: 1.25" [31.75 mm]
Height: 5.38” [136.7 mm]
power delivery to non-Transition
Networks devices Power Consumption 45 Watts (max)
Power Input 48 VDC
• Power monitoring
• Auto Power Reset (APR) and power- Environment Operating: 0°C to +65°C
saving mode (Industrial +85°C SFP modules must be used
above 50°C ambient temperature)
• Web browser configurable Storage: -40°C to 85°C
• Plug-and-Play installation Altitude: 0 – 10,000 ft.
• Field upgradeable firmware Weight 1.05 lbs. [0.48 kg]
Compliance Safety: External Power Supply: CE Mark;
• Managed through a single IP address Emissions: FCC Part 15, CISPR22/EN55022
Class A;
Immunity: EN55024
*Typical RG59U cable DC resistance of 50 ohm
Warranty 5 Years
per 1000 ft. Cable with less DC resistance
may increase distance. To determine power
distance for specific cable types, refer to online
calculator.

S4140 Series
10G Carrier Ethernet NID
(4) 1000/10GBase SFP+ Ports
Transition Networks’ Carrier Ethernet solution delivers the promise

of simplicity deployed. This comprehensive solution includes CE 2.0 Ordering Information
compliant demarcation devices, access switches, and the Converge™ S4140
element and service management platform. (4) 1000/10GBase SFP+ ports
Includes 19” Rack Mount ears.
With the goal of enabling new service generating revenue, Transition
Networks’ S4140 10G network interface device is designed to support Optional Accessories (sold separately)
a wide range of MEF-based Carrier Ethernet services for Mobile SFP Modules
Backhaul, Business Ethernet, Cloud Assurance and Carrier Exchange SFPs, copper Ethernet cables and fiber patch
E-Access Services. cables
Power Supplies
CES-PSU-AC
AC power supply for S4140 and S4224
Features Specifications (100-250 VAC)
CES-PSU-DC
• (4) 1000Base/10G SFP+ ports DC power supply for S4140 and S4224
IEEE 802.3u -21V DC to -72V DC / +21V DC to +72V DC
Any port can be network or client IEEE 802.3z
IEEE 802.3x
• E-Line (EPL and EVPL) IEEE 802.3ad
E-LAN (EP-LAN and EVP-LAN) IEEE 802.1D
E-Access (Access EPL and EVPL) IEEE 802.1w
IEEE 802.1s Features
• Blended Ethernet Service Activation IEEE 802.1Q
testing supporting RFC2544 and IEEE 802.1p • Bandwidth policies enforced by rate
“services” testing via EVC bandwidth IEEE 802.1ad limiting the port, VLAN ID or EVC with
IEEE 80.1AB configurable CIR, CBS, EIR, EBS, with
policies or CoS ingress and egress IEEE 802.3ah
tags with 1-way delay measurements IEEE 802.1ag real-time green/yellow/red/discarded
reported in 1-milliseconds IEEE 1588-2008 (v2) Precision Time Protocol (PTP) frame monitoring.
ITU G.8261 Sychronous Ethernet
• Hardware based Precision Time Protocol ITU Y.1731 PM • ITU G.8031 linear APS and G.8032 (v1
1588v2 with clock off-set reporting and and v2) rings offer sub 50ms failover.
Data Rate SFP ports 1Gbps/10Gbps
monitoring between grandmaster and
Max MAC Addresses 32K • Strong security authentication/
slave with nanosecond accuracy
Max Frame Size 10,056bytes verification including SSH/SSL RSA/
• Multi-CoS 802.1p and IPv4, IPv6, DSA certificate generation, TACACS+,
Status LEDs Power, Port Activity, Port Duplex
DiffServ/TOS to ensure any level of RADIUS, HTTPs, SNMP v1, v2c and
service between operator and customer Dimensions Width: 17.378” [441.33 mm] v3, up to 15 different levels of user
Depth: 10" [254 mm] administrative access rights
networks Height: 1.75” [44.45 mm]
• Hardware based Service OAM (IEEE Power Supply Redundant, hot-swappable • IPv6 and IPv4 dual-stack addressing
802.1ag) and Performance Monitoring AC 100-250 VAC
DC 21-72 VDC • Dual firmware banks/images
(ITU Y.1731) ensure accurate service
performance delivery with two and one- Environment Operating: 0°C to 50°C • Configuration backup/restore
way delay measurement reporting. Compliance Safety: UL listed
EMI: EN55022 Class A, CE • Dying / Last gasp
Warranty 5 Years Hardware • Industry Standard CLI
• InterVLAN routing

S4110 Series
SFP+ to SFP+ for Data Rates from 1 Gbps to 11.5 Gbps
The S4110 is a 10Gbps protocol independent media converter with two

pluggable SFP+ ports. Each port can support data rates from 1Gbps Ordering Information
up to 11.5Gbps allowing network designers to customize the S4110 S4110-4848
with a pair of SFP modules from Transition Networks wide SFP product 1 Gbps to 11.5Gbps fiber repeater with two
offering, to meet their network requirements. The S4110 can be used open SFP+ slots, any rate to same rate stand-
alone media converter
as an any-rate to similar-rate fiber mode converter, as well as a WDM
transponder. Optional Accessories (sold separately)
SFP Modules
SFP and SFP+ modules supported
S4110-4848
Mounting Options:
Features Specifications WMBL
Wall Mount Bracket 4" [102mm]
• Fiber to fiber repeater WMBD
ITU.G.709 DIN Rail Bracket 5" [127mm]
• Supports data rates from 1Gbps to SFF8431
Multi-sourcing Agreement (MSA) E-MCR-05
11.5Gbps Small Form Factor Pluggable (SFP) 12 Slot Media Converter Rack
• Support any-rate to similar-rate TDM Port (T1) PWR: On = Power RMS19-SA4-01
Port 1 Link/Act: On = Link, Flashing = Network Traffic 4 Slot Media Converter Shelf
• Protocol Transparent, supports: Port 2 Link/Act: On = Link, Flashing = Network Traffic
-- Ethernet: 10Gig LAN, 10Gig Wan, 1Gig Data Rate Protocol Independent, 1Gbps to 11.5Gbps
LAN Dip Switches Only 4 of the 8 Dip Switches are used to select the
operational data rate, see the user guide for the
-- Fiber Channel: 10, 8, 4, 2, 1Gig
supported dip switch configurations
-- SONET/SDN OC-192, OC-48 Power Supply Included
Depth: 6.5” [165 mm] To order the corresponding country
• SFP to SFP or SFP+ to SFP+ Height: 1" [25 mm] specific power supply, add the
• Provides conversion between different Power Supply External AC/DC power supply, Universal AC 120-240VAC input,
types of fiber 12VDC 1.5A output
Environment Operating: 0°C to 50°C -NA = Country Code
• Supported transmission distance based -NA = North America
Storage: -40° to 85°C -LA = Latin America
on the SFP modules and fiber type used Humidity: 5% to 95% (non-condensing) -EU = Europe
• Supports 3R (Reamplify, Reshape, and -SA = South Africa
Retime) signal regeneration -JP = Japan
MTBF With Power Supply: -OZ = Australia
• No frame size limitations Greater than 41,660 hours (MIL-HDBK-217F) -BR = Brazil
• Use as a fiber mode converter Without Power Supply:
Greater than 250,000 hours (MIL-HDBK-217F)
• Use as a specific wavelength CWDM Greater than 687,000 hours (Bellcore)
Transponder Compliance FCC Class A, CE Mark, EN55022 Class A, EN55024
• Also available as an ION slide-in card Warranty Lifetime

S4120 Series
Stand-alone 10 Gigabit Ethernet Media Converter
10GBase-T Copper to Fiber
The S4120 is a 10 Gigabit Ethernet copper to fiber media converter. It
offers conversion technology by providing (1) 10GBase-T RJ-45 port and Ordering Information
(1) pluggable 10GBase-X fiber SFP+ port. The open SFP+ port supports S4120-1048
a wide variety of Transition Networks 10G SFP+ fiber modules, as well 10GBase-T RJ-45 100m
as third party MSA compatible SFP+ modules. to 10GBase-X SFP+ Slot (Empty)
The S4120 provides several 10G Ethernet enterprise and data center Optional Accessories (sold separately)
connectivity solutions. Since most 10G Ethernet switches support SFP+ Modules
a combination of copper RJ-45 and open SFP+ ports, the S4120 Supports 10G SFP+ Modules
allows users to convert either of these ports to the media type of their
S4120-1048
preference to match their network requirements, including direct Mounting Brackets
attached copper SFP+ cables. WMBL
The stand-alone S4120 is an unmanaged device, until it is linked
to C4120 installed in a managed ION chassis, then remote in-band WMBD
5" [127 mm] DIN Rail Mount Bracket
management of the S4120 is available.
E-MCR-05
Features Specifications RMS19-SA4-01
Standards IEEE 802.3 4-Slot Media Converter Shelf
• Transparent Link Pass Through
IEEE 802.3an
• Auto-Negotiation IEEE 802.3ae
IEEE 802.3az
• Auto-MDI/MDIX Data Rate 10 Gbps
• Automatic Link Restoration Dip Switches SW1: Copper Loopback Power Supply Included
SW2: Fiber Loopback
SW3: not used To order the corresponding country
• Loopback on Fiber and Copper
SW4: Transparent Link Pass Through specific power supply, add the
• DMI extension from the list below to the end
Status LEDs PWR (Power): On = power is on of the SKU; Ex: S4120-1048-NA
L/A SFP+ (Fiber port link and activity statue):
• Support Remote In-band Management On = Link OK -NA = Country Code
and Remote Firmware Upgrade when Flashing = Link and Activity OK -NA = North America
linked to a C4120 card installed in a Copper Link (Copper Link Status): -LA = Latin America
On = Link OK -EU = Europe
managed ION chassis -UK = United Kingdom
Copper Act (Copper Link Activity):
-SA = South Africa
• Fiber Port supported standards On = Activity OK -JP = Japan
-- 10GBase-SR Dimensions Width: 3.25” [82.55 mm] -OZ = Australia
Depth: 6.5” [165 mm] -BR = Brazil
-- 10GBase-LRM
Height: 1" [25.4 mm]
-- 10GBase-LR
-- 10GBase-ER
Power Supply External AC/DC power supply, Universal AC input,
-- 10GBase-ZR 12VDC 1.6A output
• The open SFP+ port also supports: Environment Operating: 0°C to 50°C
-- Direct attached 10G copper cable Humidity: 5% to 95% (non-condensing)
assemblies: Altitude: 0 – 10,000 ft.
-- Both Class-I and Class-II fiber Weight 2 lbs. [0.91 kg]
-- SFP+ modules MTBF With Power Supply:
-- SFP modules supporting WDM Greater than 41,660 hours (MIL-HDBK-217F)
technology Greater than 114,580 hours (Bellcore)
Without Power Supply:
• Support 100m on Cat6a or higher Greater than 250,000 hours (MIL-HDBK-217F)
UTP Per Energy Efficient Ethernet Greater than 687,000 hours (Bellcore)
standards, IEEE 802.3az, UTP cable Compliance FCC Class A, EN55022 Class A, EN55024, CE Mark
length is detected and power is Warranty Lifetime
adjusted according, to reduce power
consumption on shorter UTP
cable installs

STGFFxxxx-100
Stand-alone 10 Gigabit Ethernet Media Converter
10GBase-X to 10GBase-X
The Transition Networks 10 Gigabit Ethernet fiber to fiber converter is

a 2-port 10G pluggable media converter, supporting a variety of XFP
and SFP+ modules allowing network designers to utilize the module to
STGFF4747-100
meet their network requirements. (2) Port 10GBase-xx open XFP
The media converter can use either a Transition Networks' or a third to XFP Slot (empty)
party's MSA compatible 10G XFP or SFP+ modules including support STGFF4848-100
(2) Port 10GBase-xx open SFP+
for the following standards; 10GBase-SR, 10GBase-LR, 10GBase-ER, to SFP+ Slot (empty)
10GBase-LRM, and 10GBase-ZR.
This converter provides 3R (Reamplify, Reshape, and Retime) optical Optional Accessories (sold separately)
signal regeneration.
STGFF4848-100
SPS-2460-SA

• Supports 10 Gigabit Ethernet Fiber to Standards IEEE 802.3ae WMBD
Fiber full-duplex conversion IEEE 802.3ak DIN Rail Bracket 5" [127 mm]
IEEE 802.3ag
WMBD-F
• LED Link Status Indicators IEEE 802.3
IEEE 802.3x
• Link Pass Through Multisource Agreement (MSA) XFP and SFP+ WMBL
• Full-Duplex Data Rate 10 Gbps Wall Mount Bracket 4" [102 mm]
Dip Switches SW1- Port 1 mode WMBV

UP: Limiting (xR); DOWN: Linear (LRM) Vertical Wall Mount Bracket 5" [127 mm]
• Loopback SW2- Port 2 mode
• Supports +5V, +3.3V, and +1.8V MSA SW3- Link Pass Through
compliant XFP modules UP: Enabled; DOWN: Disabled
SW4-Interface loopback, forces each fiber to loop its RX to TX
• Supports 3R (Reamplify, Reshape, Power Supply Included
Retime) optical signal regeneration Status LEDs PWR (power): GREEN- power on
1LNK- fiber #1 link: GREEN- On link To order the corresponding country
• Supports 10GBase-CX4 modules in the 1ACT- fiber #1 activity/fault: GREEN- BLINK activity, specific power supply, add the
STGFF4747-100 YELLOW- Fault extension from the list below to the end
2LNK- fiber #2 link: GREEN- On link of the SKU; Ex: STGFF4747-100-NA
YELLOW- Fault -NA = Country Code
-NA = North America
Dimensions Width: 1.72” [44 mm] -LA = Latin America
Depth: 5" [127 mm] -EU = Europe
Height: 3.4” [86 mm] -UK = United Kingdom
-SA = South Africa
Power Consumption 7 Watts -JP = Japan
Power Supply 12 VDC barrel -OZ = Australia
-BR = Brazil
NOTE: dependent on ratings of the XFP and SFP+
modules used
Compliance FCC Class A, EN55024 (CISPR22) Class A, CE Mark,
EN55022 Class A
Warranty Lifetime

S6010 Series
Stand-alone T1/E1 Remotely Managed NID
T1/E1 over Fiber
The T1/E1 copper to fiber network interface device (NID) provides a

solution for those users that need to extend T1/E1 or PRI connections Ordering Information
over fiber. S6010-1011
The T1/E1 supports Small Form Pluggable (SFP) transceivers to Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
support a variety of fiber types, distances and wavelengths to provide Link Budget: 11.0 dB
maximum flexibility across a variety of network topologies. The use
S6010-1013
of Coarse Wave Division Multiplexing (CWDM) SFPs can be utilized to Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
further increase the bandwidth capacity of the fiber infrastructure. to 1300nm multimode (SC) [2 km/1.2 mi.]
The T1/E1 NID must be used in pairs. A typical installation will include
S6010-1040 S6010-1014
a chassis card installed in the ION Platform locally and a stand-alone Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
device installed at the remote location. to 1310nm single mode (SC)
S6010-1040
Features Specifications to *SFP slot (empty)
S6010-3040
• Remote in-band management Standards ANSI T1.102 (2) Coax (BNC) to *SFP slot (empty)
T1.402
• Local or Remote Loopbacks - Copper T1.408
or Fiber
ITU I.431
G.703 Single Fiber Products
G.736 Recommended use in pairs
• Switch selectable for T1 or E1
G.775
G.823 S6010-1029-A1
• Remote firmware upgrade Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
ETSI 300-166
300-233 to 1310nm TX /1550nm RX single fiber single
• LEDs for immediate visual status mode (SC)
TBR12/12
• Supports dual or single fiber Copper Connectors RJ-48, BNC
S6010-1029-A2
• Supports multimode and single mode Fiber Connectors SFP: LC connector Uses standard 100Base-X/OC-3
SFP Fixed Optics: ST or SC connector
fiber at a variety of distances to 1550nm TX /1310nm RX single fiber single
Data Rates T1 = 1.544 Mbit/s, E1 = 2.048 Mbit/s mode (SC)
• Supports CWDM SFPs [20 km/12.4 mi.] Link Budget: 19.0 dB
Status LEDs Power, Signal Detect Copper, Signal Detect Fiber
• SNMP management when used with ION Dimensions Width: 3.25” [82 mm]
chassis and management module Depth: 6.5” [165 mm] Optional Accessories (sold separately)
Height: 1" [25 mm]
SFP Modules
• Remote stand-alone can be managed Power Consumption 2.6 Watts
by local peer Wide Input (24 - 60VDC) Power Supplies
Power Input 100-240 VAC
• Extend PRI over fiber Power Output 12 VDC SPS-2460-SA
Altitude: 0 – 10,000 ft. Mounting Options
Weight 2 lbs. [0.90 kg] WMBL
MTBF With Power Supply:
Greater than 41,660 hours (MIL-HDBD-217F) WMBD
Greater than 114,580 hours (Bellcore) DIN Rail Bracket 5" [127 mm]
Without Power Supply:
Greater than 250,000 hours (MIL-HDBD-217F) E-MCR-05
Greater than 687,000 hours (Bellcore) 12-Slot Media Converter Rack
Compliance CISPR/EN55022 Class A, FCC Class A, CE Mark, UL60950 RMS19-SA4-01

Warranty Lifetime
*SFP port uses standard 100Base-x/oc-3 SFP

end of the SKU; Ex: S6010-1011-NA
-NA = Country Code

S6110 Series
Stand-alone T1/E1/J1 Network Interface Device
4 x T1/E1/J1 over Fiber

J1 connections over fiber. S6110-1011
wavelengths to provide maximum flexibility across a variety of network
S6110-1013
topologies. 1300nm multimode (SC) [2 km/1.2 mi.]
The use of Coarse Wave Division Multiplexing (CWDM) SFPs can to (4) RJ-48 [1.5 km/0.9 mi.]
be utilized to further increase the bandwidth capacity of the fiber
S6110-1013 S6110-1014
infrastructure. 1310nm single mode (SC) [20 km/12.4 mi.]
The ION 4 x T1/E1/J1 NID must be used in pairs. A typical installation to (4) RJ-48 [1.5 km/0.9 mi.]
will include a chassis card installed in the ION Platform locally and a
S6110-1040
stand-alone device installed at the remote location. 1 *SFP port (Empty)
Applications include: T1/E1/J1 extension over fiber, Mobile backhaul, to (4) RJ-48 [1.5 km/0.9 mi.]
Features and Business customers. S6111-1040

2 *SFP ports (Empty)
• (4) RJ-48 copper interfaces to (4) RJ-48 [1.5 km/0.9 mi.]
• (1) fiber interface (fixed or SFP)

Specifications
(2) SFP ports on S6111-1040 model Standards ANSI T1.102
T1.403
T1.408 S6110-1029-A1
• Loopback via test set
ITU I.431 1310nm TX/1550nm RX single fiber single
• Local and remote loopbacks G.703 mode (SC) [20 km/12.4 mi.]
G.736 Link Budget: 19.0 dB
• LEDs for device status and G.775 to (4) RJ-48 [1.5 km/0.9 mi.]
G.823
troubleshooting ETSI 300-166 S6110-1029-A2
300-233 1550nm TX/1310nm RX single fiber single
• Settings for line code, line build out, mode (SC) [20 km/12.4 mi.]
TBR 12/13
loopbacks and Alarm Indication Signal AT&T Pub 62411 Link Budget: 19.0 dB
(AIS) to (4) RJ-48 [1.5 km/0.9 mi.]
Data Rate Copper ports (RJ-48): T1(J1) = 1.544Mb/s,
• Access to complete status and E1 = 2.048Mb/s
SFP port(s) (empty): 100Base-X/OC-3 Optional Accessories (sold separately)
configuration on local and remote
device Switches Numerous switch settings for line coding, line build SFP Modules
out, loopback and AIS
• Remote firmware upgrade Status LEDs Power, Port Status, Loopback and AIS Wide Input (24 - 60VDC) Power Supplies
• Remote management Dimensions Width: 3.7” [94 mm] SPS-2460-SA

Depth: 6.5” [165 mm] Stand-Alone Power Supply
• Extended operating temperature Height: 1.8” [46 mm]
Power Consumption 6 Watts (max) for dual fiber model Mounting Options
5.5 Watts (max) for single fiber model
WMBL
Power Input AC: 12 VDC via barrel connector using 100- Wall Mount Bracket 4" [102 mm]
240VAC, UL listed power supply
Storage: -40°C to +85°C *SFP port uses standard 100Base-x/oc-3 SFP
Compliance EN55022 Class A, EN55024, CE mark Power Supply Included
Warranty Lifetime To order the corresponding country specific power
-NA = Country Code

S6120 Series
Stand-alone T1/E1/J1 Network Interface Device
4 x T1/E1/J1 + 10/100 Ethernet over Fiber
J1 connections and 10/100Mbps Ethernet over fiber. S6120-1011
wavelengths to provide maximum flexibility across a variety of network plus 10/100Base-TX (RJ-45) [100m]
topologies. S6120-1013
1300nm multimode (SC) [2 km/1.2 mi.]
The use of Coarse Wave Division Multiplexing (CWDM) SFPs can Link Budget: 11.0 dB
S6120-1013 be utilized to further increase the bandwidth capacity of the fiber to (4) RJ-48 [1.5 km/0.9 mi.]
infrastructure. plus 10/100Base-TX (RJ-45) [100m]
S6120-1014
The ION 4 x T1/E1/J1 NID must be used in pairs. A typical installation 1310nm single mode (SC) [20 km/12.4 mi.]
will include a chassis card installed in the ION Platform locally and a Link Budget: 16.0 dB
stand-alone device installed at the remote location. to (4) RJ-48 [1.5 km/0.9 mi.]
plus 10/100Base-TX (RJ-45) [100m]
Applications include: T1/E1/J1 extension over fiber, and Mobile
S6120-1040
backhaul, and business customers. 1 *SFP port (Empty) to (4) RJ-48
[1.5 km/0.9 mi.] plus 10/100Base-TX
Features Specifications (RJ-45) [100m]
Standards ANSI T1.102 S6121-1040

• (4) RJ-48 copper interfaces 2 *SFP ports (Empty) to (4) RJ-48
T1.403 and T1.408
ITU I.431 [1.5 km/0.9 mi.] plus 10/100Base-TX (RJ-45)
• (1) fiber interface (fixed or SFP) [100m]
G.703
• (2) SFP ports on S6121-1040 model G.736
G.775
• (1) RJ-45 10/100Mbps Ethernet port G.823 Single Fiber Products
ETSI 300-166
S6120-1029-A1
• Auto-MDI/MDIX 300-233
1310nm TX/1550nm RX single fiber single
TBR 12/13
mode (SC) [20 km/12.4 mi.] LB: 19.0 dB
• Pause (Flow Control on Ethernet port) AT&T Pub 62411
to (4) RJ-48 [1.5 km/0.9 mi.]
IEEE 802.3
plus 10/100Base-TX (RJ-45) [100m]
• Loopback via test set Data Rate Copper ports (RJ-48): T1(J1) = 1.544Mb/s,
E1 = 2.048Mb/s S6120-1029-A2
• Local and remote loopbacks Ethernet port (RJ-45): 10/100Mbps 1550nm TX/1310nm RX single fiber single
SFP port(s) (empty): 100Base-X/OC-3 mode (SC) [20 km/12.4 mi.] LB: 19.0 dB
• LEDs for device status and to (4) RJ-48 [1.5 km/0.9 mi.]
troubleshooting Switches Numerous switch settings for line coding, line plus 10/100Base-TX (RJ-45) [100m]
build out, loopback and AIS
• Settings for line code, line build out, Optional Accessories (sold separately)
Status LEDs Power, Port Status, Loopback and AIS
loopbacks and Alarm Indication Signal SFP Modules
(AIS) Depth: 6.5” [165 mm]
Height: 1.8” [46 mm] Wide Input (24 - 60VDC) Power Supplies
• Access to complete status and
configuration on local and remote Power Consumption 6 Watts (max) for dual fiber model
SPS-2460-SA
5.5 Watts (max) for single fiber model
device Stand-Alone Power Supply
Power Input AC: 12 VDC via barrel connector using 100-240VAC,
• Remote firmware upgrade UL listed power supply
Mounting Options
• Remote management Environment Operating: -10°C to 65°C
Storage: -40°C to 85°C WMBL
Humidity: 5% to 95% (non-condensing) Wall Mount Bracket 4" [102 mm]
• Extended operating temperature
Compliance EN55022 Class A, EN55024, CE mark *SFP port uses standard 100Base-x/oc-3 SFP
Warranty Lifetime

-NA = Country Code

S6210 Series
Stand-alone DS3-T3/E3 Network Interface Device
DS3 – T3/E3 Coax over Fiber
The DS3 – T3/E3 copper to fiber network interface device (NID)

provides a solution for those users that need to extend DS3 Ordering Information
connections over fiber. S6210-3011
The DS3 – T3/E3s supports Small Form Pluggable (SFP) transceivers to (2) Coax (BNC) to 1300nm multimode (ST)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
support a variety of fiber types, distances and wavelengths to provide
maximum flexibility across a variety of network topologies. The use S6210-3013
(2) Coax (BNC) to 1300nm multimode (SC)
of Coarse Wave Division Multiplexing (CWDM) SFPs can be utilized to [2 km/ 1.2 mi.] Link Budget: 11.0 dB
further increase the bandwidth capacity of the fiber infrastructure. S6210-3014
The DS3 – T3/E3 NID must be used in pairs. A typical installation will (2) Coax (BNC) to 1310nm single mode (SC)
S6210-3040 [20 km/12.4 mi.] Link Budget: 16.0 dB
include a chassis card installed in the ION Platform locally and a stand-
alone device installed at the remote location. S6210-3040
(2) Coax (BNC) to *SFP slot (empty)
• AIS (Alarm Indication Signal) Standards ANSI Single Fiber Products
ITU-TS Recommended use in pairs
• Coax Line Build Out ETSI
G.823 for jitter tolerance S6210-3029-A1
G.755 for loss of signal (2) Coax (BNC) to 1310nm TX/1550nm
• Switch selectable for DS3/T3 or E3 RX single fiber single mode (SC)
Coax Connectors 75 ohm coax [20 km/12.4 mi.] Link Budget: 19.0 dB
• Remote firmware upgrade
Fiber Connectors SFP: LC connector Uses standard 100Base-X/OC-3 S6210-3029-A2
• Loopback – Coax and Fiber SFP Fixed Optics: ST or SC connector (2) Coax (BNC) to 1550nm TX/1310nm
Data Rates DS3/T3 = 44.7Mbps; E3 = 34.4Mbps RX single fiber single mode (SC)
• LEDs for immediate visual status [20 km/12.4 mi.] Link Budget: 19.0 dB
Status LEDs Power, Coax link status, coax loopback status, AIS
• Supports dual or single fiber on coax link; Fiber link status, fiber loopback Optional Accessories (sold separately)
status, AIS on fiber link
• Supports multimode and single mode SFP Modules
fiber at a variety of distances Depth: 6.5” [165 mm]
Height: 1" [25 mm] Wide Input (24 - 60VDC) Power Supplies
• Supports CWDM SFPs SPS-2460-SA
• SNMP management when used with Power Input 100-240 VAC
ION chassis and management module
Power Output 12 VDC Mounting Options
• Remote stand-alone can be managed Environment Operating: -10°C to +65°C
WMBL
by local peer Humidity: 5% to 95% (non-condensing)
Weight 2 lbs. [0.90 kg] WMBD
MTBF With Power Supply:
Greater than 41,660 hours (MIL-HDBD-217F) E-MCR-05
Greater than 114,580 hours (Bellcore) 12-Slot Media Converter Rack
Without Power Supply: RMS19-SA4-01
Greater than 250,000 hours (MIL-HDBD-217F) 4-Slot Media Converter Shelf
Compliance CISPR/EN55022 Class A, FCC Class A, CE Mark, UL60950 *SFP port uses standard 100Base-x/oc-3 SFP
Warranty Lifetime

-NA = Country Code
-NA = North America
-LA = Latin America
-EU = Europe
-SA = South Africa
-JP = Japan
-OZ = Australia
-BR = Brazil

SAPTF33xx-1xx
Stand-alone POTS 2-Wire Media Converter
POTS 2-Wire Copper to Fiber
Connect central-office voice grade signals to distant Plain Old

Telephone equipment (POTS) utilizing standard telephone signaling. Ordering Information
Two units are required to implement an end to end system. Unit Line Side FXS: SAPTF3311-105
A connects to a telephone line or PBX and has the ability to detect Customer Side FXO: SAPTF3311-115
ringing voltages and to act as a telephone (LINE SIDE FXS). Unit B is Twisted Pair (RJ-11) [5 km/3.1 mi.]
the reciprocal unit and has the ability to act as a Central Office and Link Budget: 11.0 dB
connects to a telephone device (CUSTOMER SIDE FXO).
Line Side FXS: SAPTF3313-105
Devices must be used in pairs. Typical installation will include a Customer Side FXO: SAPTF3313-115
chassis card [CAPTF] installed in the Point System™ locally and a Twisted Pair (RJ-11) [5 km/3.1 mi.]
SAPTF3311-105 to 1300nm multimode (SC) [2 km/1.2 mi.]
stand-alone device installed at the remote location. Link Budget: 11.0 dB
Line Side FXS: SAPTF3314-105
Features Specifications Customer Side FXO: SAPTF3314-115
Standards FCC Part 68 to 1310nm single mode (SC) [20 km/12.4 mi.]
• Audio Transmission
TBR21 Link Budget: 16.0 dB
• Caller ID Analog Port (Telephone Emulation or FXS)
• Automatic Ring Down

Connector: RJ-11 Single Fiber Products
Impedance: 600 ohms
REN: 0.48 Line Side FXS: SAPTF3329-105*
• Duplex or Single Fiber Options Loop Current: 20 to 60 ma. Customer Side FXO: SAPTF3329-115*
Insertion Loss: 0.0 +/-1.0 dB at 1000 Hz Twisted Pair (RJ-11) [5 km/3.1 mi.]
when both ports are terminated at 600 ohms to 1310nm TX/1550nm RX single fiber
single mode (SC) [20 km/12.4 mi.]
Analog Port (Central Office Emulation or FXO) Impedance: 600 ohms Link Budget: 19.0 dB
Battery Source: 48 VDC +/- 5V
Ringing Supply: 90 Vp-p Line Side FXS: SAPTF3329-106*
Ring Frequency: 15 – 25 Hz. Customer Side FXO: SAPTF3329-116*
(Reproduces frequency detected by side A) Twisted Pair (RJ-11) [5 km/3.1 mi.]
Ring Cadence: Reproduces cadence detected by side A to 1550nm TX/1310nm RX single fiber
Insertion Loss: 1.0 +/- 1.0 dB @ 1000 Hz single mode (SC) [20 km/12.4 mi.]
when both ports are terminated at 600 ohms Link Budget: 19.0 dB
Voice Frequency 300 Hz – 3 KHz
*Note: Single Fiber Products should be paired
Optional Jumpers Automatic Ring Down/Normal by application:
Status LEDs LED colors are Green
Fiber Link: ON indicates fiber link up;
In Use: ON indicates unit in use;
Flashing indicates ringing;
Power: ON indicates power is on Power Supply Included
Dimensions 105 Model: Width: 3.25” [82 mm] To order the corresponding country
Depth: 4.7” [119 mm] specific power supply, add the
Height: 1" [25 mm] extension from the list below to the end
115 Model: Width: 3.7” [94 mm] of the SKU; Ex: SAPTF3311-105-NA
Depth: 4.7” [119 mm]
Height: 1.8” [46 mm] -NA = Country Code
-NA = North America
Power Supply External AC/DC provided; 12 VDC, 1.25A Output; -LA = Latin America
unregulated; standard; UL Listed; 120-240VAC input -EU = Europe
Environment Operating: -10°C to +65°C -SA = South Africa
Storage: -25°C to +85°C -JP = Japan
Humidity: 5% to 95% (non-condensing) -OZ = Australia
Altitude: 0 – 10,000 ft. -BR = Brazil
UL Listed and CSA certified
Emissions: FCC Class A, EN 55022 (CISPR 22)
Class A, ICES 003, CE Mark
Warranty Lifetime

J/RS232-xF-01(xx)
Stand-alone RS232 Media Converter

access/alarming systems to a host computer. Ideal for campus or J/RS232-CF-01
business environments where remote devices can be networked in a DB-9 (female) [15 m/49 ft.]
point-to-point configuration where distances are greater than the 15 to 1300nm multimode (ST) [2 km/1.2 mi.]
meter limitation of conventional copper serial cables.
J/RS232-CF-01(SC)
Transition Networks’ Just Convert It serial RS232 to Fiber Media DB-9 (female) [15 m/49 ft.]
Converter is an inexpensive, no frills way to extend the distance to 1300nm multimode (SC) [2 km/1.2 mi.]
between serial connections with the use of fiber optic cable. This Link Budget: 11.0 dB
J/RS232-CF-01
converter supports full or half-duplex data transmission at speeds up J/RS232-TF-01
DB-9 (male) [15 m/49 ft.]
to 120 Kbps. Unit and Port LEDs allow for quick status information on to 1300nm multimode (ST) [2 km/1.2 mi.]
the converter. Link Budget: 11.0 dB
J/RS232-TF-01(SC)
Features Specifications DB-9 (male) [15 m/49 ft.]
to 1300nm multimode (SC) [2 km/1.2 mi.]
Standards EIA/TIA-574 Link Budget: 11.0 dB
• Offered with either a male or
EIA/TIA RS-232E
female connector Optional Accessories (sold separately)
• Full/Half-duplex transmission RX: Steady = Link;
Flashing = Rx Data Wide Input (24 - 60 VDC) Power Supplies
at speeds up to 120 Kbps
FL: Steady = Fiber Link SPS-2460-SA
• Fiber LED lights to show link with Dimensions Width: 3" [76 mm] Stand-Alone Power Supply
or without data transmission Depth: 3.9” [100 mm]
Height: 1" [25 mm] Mounting Options
E-MCR-05
Power Supply External AC/DC; 12 VDC, 0.5A min Output; 12-Slot Media Converter Rack
120-240VAC input
RMS19-SA4-01
Environment Operating: 0°C to 50°C 4-Slot Media Converter Shelf
Altitude: 0 – 10,000 ft. WMBD
WMBD-FS
Compliance Safety: Wall Mount Power Supply: DIN Rail Bracket (flat) 3.1” [79 mm]
UL Listed and CSA certified
Emissions: CISPR22/EN55022 Class A + EN55024, EN60950 WMBS
Class A, FCC Class A, CE Mark Wall Mount Bracket 3.2” [81 mm]
Warranty Lifetime

of the SKU; Ex: J/RS232-CF-01-NA
-NA = Country Code
-NA = North America
-LA = Latin America
-EU = Europe
-SA = South Africa
-JP = Japan
-OZ = Australia
-BR = Brazil

SRS2F311x-100
Stand-alone RS232 Remotely Managed Media Converter
access/alarming systems to a host computer. Ideal for campus or SRS2F3111-100
business environments where remote devices can be networked in a DB-9 [15 m/49 ft.]
point-to-point configuration where distances are greater than the 15 to 1300nm multimode (ST) [2 km/1.2 mi.]
meter limitation of conventional copper serial cables.
SRS2F3113-100
Transition Networks’ serial RS232 to fiber converter allows you to DB-9 [15 m/49 ft.]
extend the distance between serial connections with the use of fiber to 1300nm multimode (SC)
optic cable. This full-featured converter transmits the full complement [2 km/1.2 mi.] Link Budget: 11.0 dB
of RS232 flow control/handshaking signals optically and supports full SRS2F3114-100

SRS2F3111-100 DB-9 [15 m/49 ft.]
or half-duplex asynchronous data transmission at speeds up to 115 to 1310nm single mode (SC) [20 km/12.4 mi.]
Kbps. Link Budget: 16.0 dB
The diagnostic features included on this converter make installation
easy and intuitive. A DTE/DCE switch eliminates the frustration over Optional Accessories (sold separately)
selecting the appropriate cable. A loopback switch allows for complete Wide Input (24 - 60 VDC) Power Supplies
diagnostic testing prior to system turn-up or during troubleshooting.
SPS-2460-PS
Unit and Port LEDs allow for quick status information of the converter. Piggy Back Power Supply
In addition to status LEDs and switch settings for local management, SPS-2460-SA
these converters can also be managed from remote locations when Stand-Alone Power Supply
used in conjunction with a managed Point System™ chassis.
Mounting Options
Features Specifications E-MCR-05

Standards EIA/TIA-574 RMS19-SA4-01
• Remote Management
EIA/TIA RS-232E 4-Slot Media Converter Shelf
• Local or Remote Loopback on Data Rate 115 Kbps
WMBD
copper and fiber Switches DTE/DCE: Select appropriate position DIN Rail Bracket 5" [127 mm]
Loopback: Norm = normal operation;
• DTE/DCE switch for easy Loop = Fiber and copper loopback WMBD-F
installation with DIN Rail Bracket (flat) 3.3” [84 mm]
Status LEDs P: (Power): Lit for normal operation
straight-through cabling WMBL
RX: Steady = Copper Link;
Flashing = Rx Data Wall Mount Bracket 4" [102 mm]
• Full/Half-duplex asynchronous
FL: Steady = Fiber Link; WMBV
transmission at speeds up to Flashing = Loopback mode Vertical Wall Mount Bracket 5" [127 mm]
115 Kbps
• Supports the following flow Depth: 4.8” [122 mm]
control signaling:
1. DCD - Data Carrier Detect Power Consumption 5 Watts
2. RXD - Receive Data Power Supply External AC/DC; 12 VDC, 0.5A min output; 120-240VAC input Power Supply Included
3. TXD - Transmit Data Environment Operating: 0°C to 50°C To order the corresponding country
4. DTR - Data Terminal Ready Humidity: 5% to 95% (non-condensing) specific power supply, add the
5. SG - Signal Ground Altitude: 0 – 10,000 ft. extension from the list below to the end
6. DSR - Data Set Ready of the SKU; Ex: SRS2F3111-100-NA
7. RTS - Request To Send -NA = Country Code
Compliance Safety: Wall Mount Power Supply: UL Listed and CSA certified
8. CTS - Clear To Send Emissions: CISPR22/EN55022 Class A + EN55024,
-NA = North America
-LA = Latin America
EN60950 Class A, FCC Class A, CE Mark -EU = Europe
Warranty Lifetime -UK = United Kingdom
-SA = South Africa
-JP = Japan
-OZ = Australia
-BR = Brazil

SRS4F3x1x-100
Stand-alone RS422/485 Media Converter
RS422/485 Copper to Fiber

access/alarming systems to a host computer. Ideal for campus or SRS4F3111-100
business environments where remote devices can be networked in DB-9 [1.2 km/0.7 mi.]
either a point-to-point or point-to-multi-point configuration. to 1300nm multimode (ST) [2 km/1.2 mi.]
Transition Networks’ serial RS422/485 to fiber converter allows you to
SRS4F3111-100 SRS4F3113-100
extend the distance between serial connections with the use of fiber DB-9 [1.2 km/0.7 mi.]
optic cable. This full-featured converter operates in 2-wire mode for to 1300nm multimode (SC) [2 km/1.2 mi.]
RS422 and either 2-wire or 4-wire mode for RS485 and supports full Link Budget: 11.0 dB
SRS4F3211-100
or half-duplex data transmission at speeds up to 1.25 Mbps. SRS4F3114-100
DB-9 [1.2 km/0.7 mi.]
SRS4F3211-100
Standards EIA/TIA RS-422
• RS422 or RS485 operation EIA/TIA RS-485
• 2-wire or 4-wire operation Dip Switches SW1: 130 ohm resistor RX (Down = enable) Link Budget: 11.0 dB
in RS-485 mode SW2: 130 ohm resistor TX (Down = enable)
SW3: 1k ohm “pull-down” (Down = enable) SRS4F3213-100
SW4: 1k ohm “pull-up” (Down = enable) Terminal Block [1.2 km/0.7 mi.]
• Full/Half-duplex transmission to 1300nm multimode (SC) [2 km/1.2 mi.]
at speeds up to 1.25 Mbps SW5: 2-wire/4-wire (Down = 4-wire)
SW6: RS-485/RS-422 (Down = RS-422) Link Budget: 11.0 dB
Status LEDs PWR (Power): Lit for normal operation SRS4F3214-100

RXC: Steady = Data RX on copper link; Terminal Block [1.2 km/0.7 mi.]
Flashing = RX Data at low speed to 1310nm single mode (SC) [20 km/12.4 mi.]
RXF: Steady = Fiber Link Link Budget: 16.0 dB
Dimensions Width: 3.3” [84 mm] Optional Accessories (sold separately)
Depth: 4.8” [122 mm]
Height: 0.90” [22 mm] Wide Input (24 - 60 VDC) Power Supplies
SPS-2460-PS
Power Supply External AC/DC; 12 VDC, 0.5A min output; 120-240VAC input Piggy Back Power Supply
Environment Operating: 0°C to 50°C SPS-2460-SA
Humidity: 5% to 95% (non-condensing) Stand-Alone Power Supply
Weight 2 lbs. [0.90 kg] Mounting Options
Compliance Safety: Wall Mount Power Supply: UL Listed and CSA certified E-MCR-05
Emissions: CISPR22/EN55022, EN55024, EN60950 Class A, 12-Slot Media Converter Rack
FCC Class A, CE Mark, UL 1950
RMS19-SA4-01
Warranty Lifetime
WMBD
specific power supply, add the WMBD-E
DIN Rail Bracket (Extended) 4.3”[109 mm]
of the SKU; Ex: SRS4F3111-100-NA WMBD-F
-NA = Country Code
-NA = North America WMBL
-LA = Latin America Wall Mount Bracket 4" [102 mm]
-EU = Europe
-UK = United Kingdom WMBV
-SA = South Africa Vertical Wall Mount Bracket 5" [127 mm]
-JP = Japan
-OZ = Australia
-BR = Brazil

SPSVT26xx-10x
Stand-alone High Speed Serial Remotely Managed
Media Converter
V.35/X.21/RS449/RS530/RS232 Copper to Fiber
Specifications *SPSVT2611-100
Standards ITU-T 26-pin to 1300nm multimode (ST)
ISO-2593 [2 km/1.2 mi.] Link Budget: 11.0 dB
Data Rate 1.2 Kbps to 10 Mbps SPSVT2613-100

26-pin to 1300nm multimode (SC)
Dip Switches - 0 – TT = Receive CLK - 8 – 768 Kbps [2 km/1.2 mi.] Link Budget: 11.0 dB
- 1 – 56 Kbps - 9 – 1.024 Mbps
SPSVT2611-100 - 2 – 64 Kbps - A – 1.544 Mbps *SPSVT2614-100
- 3 – 112 Kbps - B – 2.048 Mbps 26-pin to 1310nm single mode (SC)
Features - 4 – 128 Kbps
- 5 – 256 Kbps
- C – 3.072 Mbps
- D – 4.096 Mbps
- 6 – 384 Kbps - E – 6.144 Mbps Optional Accessories (sold separately)

• Connect High Speed Serial signals
on copper to fiber - 7 – 512 Kbps - F – Asynchronous Mode
• Supports multiple protocols through

Side panel, external DCE speed switch, sixteen position: Speeds
can also be set on DCE devices locally or remotely via software
Cable Assemblies
the use of a universal 26-pin serial Front Panel, Loopback Selector 21DCE-3
interface connector Switch: Right Position: Loop Fiber Back & Loop Copper Back Left DB-15 (FT) (26-pin) to (DCE) [3 m/10 ft.]
Position: Normal Operation
21DTE-3
• Extend the point of presence of a Internal Jumpers Jumper (J4): Hardware: The terminal timing switch controls DB-15 (MT) (26-pin) to (DTE) [3 m/10 ft.]
copper V.35/X.21/RS449/RS530/RS232 the terminal timing function. The loopback switch controls the
connection at data rates up to 10 Mbps. loopback function. Software: The terminal timing switch and the 530DCE-3
loop-back switch are disabled. These two functions are DB-25 (FT) (26-pin) to (DCE) [3 m/10 ft.]
• In-band Remote Management when controlled by the most recently saved, on-board micro processor 530DTE-3
used in conjunction with Point settings. Jumper (J6): RX Clock Polarity: Set to sample the DB-25 (MT) (26-pin) to (DTE) [3 m/10 ft.]
System™ card receive data on the rising or falling edge of the receive clock.
Jumper (J7): TX Clock Polarity: Set to sample the transmit data
• Operational speeds up to 10 Mbps on the rising or falling edge of the receive clock. Wide Input (24 - 60 VDC) Power Supplies
Status LEDs The Copper LED uses a green LED SPS-2460-PS
• Copper & Fiber Loopback Smart Serial Link: Green - Link is up; Piggy Back Power Supply
Green Flashing - In loopback mode;
• Synchronous or asynchronous Fiber: Green - Link is up; Green Flashing - In loopback mode; SPS-2460-SA
capability Power: Green - ON power applied to board Stand-Alone Power Supply
• Selectable DCE speeds Dimensions Width: 3.25” [82 mm]
Depth: 4.8” [120 mm]
• LED indications for Lock, Loopback & Height: 1" [25 mm] Mounting Options
Data Power Supply External AC/DC required; 12 VDC; 1A output; 120-240VAC input E-MCR-05
• Use a combination of any copper Power Consumption 5.0 Watts
WMBD
interface: (RS449 to V.35, RS530 to Environment Operating: 0°C to 50°C
X.21, DTE-DTE, DTE-DCE, DCE-DCE, Humidity: 5% to 90% (non-condensing)
Altitude: 0 – 10,000 ft. WMBD-F
etc.) All interfaces converted at the
Weight 2 lbs. [0.90 kg] DIN Rail Bracket (flat) 3.3” [84 mm]
physical level.
Compliance Safety: Wall Mount Power Supply: UL Listed and CSA certified WMBL
Manageable Features Emissions: CISPR/EN55022, EN55024, EN60950
Class A, FCC Class A, CE Mark
WMBV
• Report converter status to chassis Warranty Lifetime Vertical Wall Mount Bracket 5" [127 mm]
management software:
RMS19-SA4-01
-- Local Fiber Link status 4-Slot Media Converter Shelf
-- Local/Remote Hardware/Software mode * Product is in BTO status and is built on a per order
basis. Please contact a Transition Networks sales
-- Local/Remote Speed select associate for details and lead times.
-- Local/Remote Cable type reporting,
near end Copper Distances Power Supply Included
-- Local/Remote Clock polarity setting Standard Range* To order the corresponding country specific
RS232/V.24 15 m power supply, add the extension from the list
• Write operation includes: RS449/V.36 1.2 km below to the end of the SKU; Ex: spsvt2611-
V.35 600 m 100-NA
-- Local or Remote Loopback
X.21 1.2 km
-- Local or Remote Speed Select RS530 1.2 km -NA = Country Code
*For reference only. Contact Transition Networks NA = North America, LA = Latin America, EU =
for detailed range information. Europe, UK = United Kingdom, SA = South Africa,

SDSFX311x-111-LRT
Hardened Serial Device Server
(1) 100Base-FX Fiber SC Ethernet + (1) RS232/422/485 DB9
Port
Transition Networks serial device server provides the ability to
SDSFX3113-111-LRT
communicate serial data across an Ethernet network. The SDSFX3110- (1) 100Base-FX 1310nm multimode (SC)
111-LRT contains a 100Base fiber port that can be configured to [2 km/1.2 mi.] +
communicate to one or multiple redundant servers. Security of the data (1) RS232/422/485 DB9 port
transmission is assured through HTTPS, SSH, and SSL data encryption. SDSFX3114-111-LRT
(1) 100Base-FX 1310nm single mode (SC)
The SDSFX311x-111-LRT comes with COM port redirector software (30 km/18.6 mi.] +
enabling communication of serial data to a virtual COM port on a server, (1) RS232/422/485 DB9 port
or can be used in pairs to provide serial tunneling across the Ethernet
network. Optional Accessories (sold separately)
The SDSFX311x-111-LRT is a hardened device designed to operate in Industrial Power Supplies:

the harshest environments. Enclosed in an IP30 enclosure and accepting 25135
input voltage of 12 to 48 VDC, the device is certified to operate in Input: 85-264 VAC, 120-370 VDC
temperatures of -40°C to +70°C. Output: 24VDC, .42A, 10 Watts
25130
Input: 85-264 VAC, 120-370 VDC
Output: 48VDC, .83A, 39.8 Watts
Standards IEEE 802.3x
• Operating Modes: Virtual Com, Serial
IEEE 802.3u
Tunnel, TCP Server, TCP Client, UDP
Ethernet (1) 100BaseFX Ethernet
• Security: SSL data encryption; secured Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS,
management by HTTPS and SSH IP SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE,
Access: IP White List DDNS
Serial Ports (1) DB9M
• Update DNS Hostname: DDNS
Protocols RS-232/422/485 (2 and 4 wire)
• Event Warning by SYSLOG, Email, SNMP Baud Rates 110bps to 460Kbps
Data Bits 5, 6, 7, 8
traps Parity Odd, Even, None, Space
Stop Bits 1, 1.5, 2
• Various Windows O.S. supported: RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Windows NT/2000/ XP/ 2003/ RS-422 Tx+. Tx-, Rx+, Rx-, GND
VISTA(32/64bit)/Windows 7(32/64bit) RS-485 (4 wire) Tx+. Tx-, Rx+, Rx-, GND
RS-485 (2 Wire) Data+, Data-, GND
• Extended operating temperature Flow Control XON/XOFF, RTS/CST, DTR/DSR
(-40°C to 70°C) Status LEDs Power, Ethernet Port Link/Act, Serial TX/RX
• DIN Rail mount included Dimensions Width: 2.83” [72 mm]
Depth: 1.16” [29.4 mm]
Height: 4.86” [123.4 mm]
Power Input 12~48 VDC; redundant inputs,
3-PIN Terminal Block, power jack
Compliance Safety: EN60950-1
FCC Part 15, CISPR22/EN55022 Class A,
EN61000-4-2, EN61000-4-3, EN-61000-4-4,
EN61000- 4-5, EN61000-4-6, EN61000-4-8,
EN61000-4-11,
IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),
Warranty Lifetime

SDSTX3110-121-LRT-B
(1) RS-232/422/485 Serial Port + (2) 10/100Base-TX Fast
Ethernet Port
SDSTX3110-121-LRT-B
Transition Networks serial device server provides the ability to (1) RS232/422/485 DB9 ports
communicate serial data across an Ethernet network. The SDSTX3110- + (2) 10/100Base-TX RJ-45 ports
121-LRT-B contains (2) 10/100Base Fast Ethernet ports that can be
configured to one or multiple redundant servers. Security of the data
transmission is assured through HTTPS, SSH, and SSL data encryption. Optional Accessories (sold separately)
25135
The SDSTX3110-121-LRT-B comes with COM port redirector software Input: 85-264 VAC, 120-370 VDC
enabling communication of serial data to a virtual COM port on a server, Output: 24VDC, .42A, 10 Watts
or can be used in pairs to provide serial tunneling across the Ethernet 25130
network. Input: 85-264 VAC, 120-370 VDC
The SDSTX3110-121-LRT-B is a hardened device designed to operate in
the harshest environments. Enclosed in an IP30 enclosure and accepting
input voltage of 12 to 48 VDC, the device is certified to operate in
temperatures of -40°C to +70°C.
Standards IEEE 802.3™
IEEE 802.3u
Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS,
• Security: SSL data encryption; secured SNMP V1/V2c, HTTPS, SMTP, SSL
management by HTTPS and SSH IP Serial Ports (1) DB9M
Access: IP White List Protocols RS-232/422/485 (2 and 4 wire)
Baud Rates 110bps to 460Kbps
• Event Warning by SYSLOG, Email, SNMP Data Bits 7, 8
Stop Bits 1, 1.5, 2
• Extended operating temperature RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
(-40°C to 70°C) RS-422 Tx+. Tx-, Rx+, Rx-, GND
RS-485 (4 wire) Tx+. Tx-, Rx+, Rx-, GND
• Various Windows O.S. supported: RS-485 (2 Wire) Data+, Data-
Flow Control XON/XOFF, RTS/CST, DTR/DSR
Windows NT/2000/ XP/ 2003/
VISTA(32/64bit)/Windows 7(32/64bit) / Status LEDs Power, Ethernet Port Link/Act, Serial TX/RX
Windows 8 Dimensions Width: 1.77” [45 mm]
Depth: 3.19” [81 mm]
Height: 3.74” [95 mm]
Power Input 12~48 VDC; redundant inputs
Weight 0.66 lbs. [.3 kg]
EN61000-4-2, EN61000-4-3, EN-61000-4-4,
EN61000- 4-5, EN61000-4-6, EN61000-4-8,
EN61000-4-11,
Warranty 5 Years

SDSTX3110-124-LRT-B
(4) RS-232/422/485 Serial Port + (2) 10/100Base-TX Fast
Ethernet Port
SDSTX3110-124-LRT-B
Transition Networks serial device server provides the ability to (4) RS232/422/485 DB9 ports
communicate serial data across an Ethernet network. The SDSTX3110- + (2) 10/100Base-TX RJ-45 ports
124-LRT-B contains (2) 10/100Base Fast Ethernet ports that can be
configured to one or multiple redundant servers. Security of the data
transmission is assured through HTTPS, SSH, and SSL data encryption. Optional Accessories (sold separately)
25135
The SDSTX3110-124-LRT-B comes with COM port redirector software Input: 85-264 VAC, 120-370 VDC
enabling communication of serial data to a virtual COM port on a server, Output: 24VDC, .42A, 10 Watts
or can be used in pairs to provide serial tunneling across the Ethernet 25130
network. Input: 85-264 VAC, 120-370 VDC
The SDSTX3110-124-LRT-B is a hardened device designed to operate in
the harshest environments. Enclosed in an IP30 enclosure and accepting
input voltage of 12 to 48 VDC, the device is certified to operate in
temperatures of -40°C to +70°C.
Standards IEEE 802.3™
IEEE 802.3u
Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS,
• Security: SSL data encryption; secured SNMP V1/V2c, HTTPS, SMTP, SSL
management by HTTPS and SSH IP Serial Ports (4) DB9M
Access: IP White List Protocols RS-232/422/485 (2 and 4 wire)
Baud Rates 110bps to 460Kbps
• Event Warning by SYSLOG, Email, SNMP Data Bits 7, 8
Stop Bits 1, 1.5, 2
• Extended operating temperature RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
(-40°C to 70°C) RS-422 Tx+. Tx-, Rx+, Rx-, GND
RS-485 (4 wire) Tx+. Tx-, Rx+, Rx-, GND
• Various Windows O.S. supported: RS-485 (2 Wire) Data+, Data-, GND
Flow Control XON/XOFF, RTS/CST, DTR/DSR
Windows NT/2000/ XP/ 2003/
VISTA(32/64bit)/Windows 7(32/64bit) / Status LEDs Power, Ethernet Port Link/Act, Serial TX/RX
Windows 8 Dimensions Width: 2.6” [66 mm]
Depth: 3.19” [81 mm]
Height: 3.74” [95 mm]
Power Input 12~48 VDC; redundant inputs
Weight 0.83 lbs. [.38 kg]
EN61000-4-2, EN61000-4-3, EN-61000-4-4,
EN61000- 4-5, EN61000-4-6, EN61000-4-8,
EN61000-4-11,
Warranty 5 Years

Mini Media Converters Provide Entry-Level Conversion, Ideal for
Applications where Physical Space is Limited
• Entry level, cost effective media conversion

• Perfect for remote connections at the network edge
• Can be deployed back to back over fiber or as single stand-alone units
• Compact design for installations with space constraints
MULTI-LEVEL ENTERPRISE BUILDING
OUTDOOR ENVIRONMENT
Mini Media
Converter
Copper Workgroup Switch
Mini Media
Converter
Copper Workgroup Switch Lamp Post
Hardened Mini Media Converter
within Camera Enclosure
Mini Media
Converter
Copper Workgroup Switch
FACTORY FLOOR
Hardened
Mini Media Ethernet Based Factory
Converter Automatron Equipment
Mini Media Converter Chassis
Copper Switch
KEY
Fiber Optic Cable
Twisted Pair Copper Ethernet Cable
Features:
• Plug-and-Play fixed network configuration
• No dip switches or configuration required
• Provides options for SC, ST, & LC fiber interfaces
• Supports, 100M, 10/100, 1000M, & 10/100/1000 Networks
M/E-PSW-FX-02
• Includes external AC power supply
- USB power available on some models

M-MCR-01
18-Slot Mini Media Converter Chassis
The Mini Media Converter Chassis is a 19” rack
mountable powered chassis for the Mini family Ordering Information
of stand-alone media converters. Designed for M-MCR-01
Transition Networks’ line of office grade, non- 18-Slot Powered Chassis for non-hardened
Mini Media Converters
hardened, mini media converters, this chassis is
ideal for installations where multiple Minis are being
deployed in the same location. It offers an easy and
cost-effective method for securely mounting up to
18 Mini converters while only requiring only one AC Power Cord Included
M-MCR-01
Mini Media Converters Sold Separately power connection. To order the corresponding country
specific power cord, add the extension
As networks grow, so does the need to interface from the list below to the end of the
between various types of cabling infrastructure and the Mini copper-to-fiber media converters offer a low cost, space SKU; Ex: M-MCR-01-NA
saving option for making those connections between disparate cable types. The Mini Media Converter Chassis is suitable -NA = Country Code
for Enterprise, or any Government, application where multiple points of fiber connectivity are required. The chassis can -NA = North America
-LA = Latin America
accept any combination of Transition Networks’ Layer 1 100Base and 1000Base Mini media converters as well as the -EU = Europe
Layer 2 10/100 and 10/100/1000 Mini media converters, all with the barrel-type DC power input connector. -UK = United Kingdom
-SA = South Africa
The chassis occupies 1.5U of rack space, allowing two chassis to be mounted in 3 units of rack space, efficiently using -JP = Japan
-OZ = Australia
critical rack space in datacenters or wiring closets. The mini converters are hot-swappable and directly connect to -BR = Brazil
the chassis backplane to receive their power connection. Three lock-down bars can be raised and lowered to allow
the installation of a hot-swappable mini converter. These bars are also used to securely hold the Mini converter in the
chassis, even when the copper and fiber data cables are being inserted and removed from the individual Mini converters.
• 19” rack mountable powered chassis Slots (18) Slots in front for Mini Media Converters
Status LEDs Power: LED on power supply, ON = Lit for normal operation
• Install up to 18 Mini Media Converters
• Universal AC power Depth: 12” [304.79 mm]
Height: 2.62” [66.54 mm]
• Mini converters are hot-swappable Power Supply Meanwell GST60A12-P1J, 60 Watts Power Supply
(UL, cUL, CE); Power cord included
• Any combination of non-hardened Mini
converters Power Input Unit accepts 100 – 240 VAC, 1.6A, 50-60Hz, 3 Pole AC
inlet IEC320-C14
• Provides modular, centralized, high Power Output 12VDC, 5.0A
density media conversion Environment Operating: 0°C to +50°C
• 23” rack mount brackets are available Humidity: 5% to 95% (non-condensing)
• Applications for
-- Enterprise Networks Weight 7.4 lbs. [3.35 kg]
-- Higher Education or Corporate Campus Warranty Lifetime
-- Physical Security & Surveillance
-- Government Agency Networks

M/E-TX-FX-01
Mini Fast Ethernet Media Converter
The Fast Ethernet Mini Media Converter provides cost effective,

entry-level media conversion for physical layer fiber integration Ordering Information
into copper based environments. With its fixed configuration, M/E-TX-FX-01
deployment is easy, just plug-and-play, and with its small size, it is 100Base-TX (RJ-45) [100m/328 ft.]
ideal for locations where space is limited. to 100Base-FX 1300nm multimode (ST)
[2km/1.2mi.] Link Budget: 11.0db
M/E-TX-FX-01(SC)
100Base-TX (RJ-45) [100m/328 ft.]
[2km/1.2mi.] Link Budget: 11.0db
M/E-TX-FX-01
M/E-TX-FX-01(SM)
100Base-TX (RJ-45) [100m/328 ft.]
Features Specifications [20km/12.4mi.] Link Budget: 16.0db
Standards IEEE 802.3u M/E-TX-FX-01(SFP)

• Fiber integration used in pairs or as a 100Base-TX (RJ-45) [100m/328 ft.]
100Base-TX
single unit, this mini media converter 100Base-FX to 100Base-X SFP Slot (empty)
will ease the integration of fiber optic M/E-TX-FX-01(100)
Status LEDs PWR (Power) below RJ-45: On = Power
cabling into copper-rich fast Ethernet FX-Link/Act (Fiber Link / Activity) Upper Left on RJ-45: 100Base-TX (RJ-45) [100 m/328 ft.]
environments On = link, Flashing = Activity to 100Base-FX 1310nm TX/1550nm RX
TX-Link/Act (Copper Link / Activity) Upper Right on single fiber single mode (SC) [20 km/12.4 mi.]
• Extend Network Distance as fiber RJ-45: On = link, Flashing = Activity Link Budget: 19.0 dB
supports the transmission of fast M/E-TX-FX-01(101)
Ethernet data over much longer Depth: 3.3” [85 mm] 100Base-TX (RJ-45) [100 m/328 ft.]
distances than possible twisted pair Height: 0.85 [22 mm] to 100Base-FX 1550nm TX/1310nm RX
single fiber single mode (SC) [20 km/12.4 mi.]
• Low-Latency Layer 1 Design, this mini Power Consumption 2.6 Watts Link Budget: 19.0 dB
converter will retransmit fast Ethernet Power Supply External AC/DC required; +12VDC, 0.5A
signals without any store-and–forward Power Input 7.5VDC to 13.9VDC
packet inspection delays found in other Wide Input DC Power Supply
Layer 2 devices Storage: -15°C to 65°C SPS-2460-SA
Humidity: 5% to 95% (non-condensing) 24VDC to 60VDC input Stand-alone
• Small Size is ideal for conversion
Altitude: 0 – 10,000 ft. Power Supply
locations where available space is
limited - 65% smaller than standard Weight 2 lbs. [0.90 kg]
media converter Compliance Wall Mount Power Supply, UL Listed, cUL Listed (Canada) Mounting Options
Warranty Lifetime
WMBM
Wall Mount Bracket for Mini
M-MCR-01
18-Slot Powered Mini Chassis
DRBM
DIN Rail Mount Bracket for Mini
RMBM
Rack Mount Bracket for Mini, use with
RMS19-SA4-01 and/or E-MCR-05

of the SKU; Ex: M/E-TX-FX-01-NA
-NA = Country Code
-NA = North America
-LA = Latin America
-EU = Europe
-SA = South Africa
-JP = Japan
-OZ = Australia
-BR = Brazil

M/E-PSW-FX-02(xx)
Mini Fast Ethernet Media Converter
The Fast Ethernet Mini Media Converter provides cost effective,

entry-level media conversion for physical layer fiber integration Ordering Information
into copper based environments. With its fixed configuration, M/E-PSW-FX-02
deployment is easy, just plug-and-play, and with its small size, it is 10/100Base-TX (RJ-45) [100 m/328 ft.]
ideal for locations where space is limited. to 100Base-FX 1300nm multimode (ST)
M/E-PSW-FX-02(SC)
10/100Base-TX (RJ-45) [100 m/328 ft.]
M/E-PSW-FX-02(SM)
M/E-PSW-FX-02(SM)
10/100Base-TX (RJ-45) [100 m/328 ft.]

• Unit and Port LEDs allow for quick
status information Status LEDs PWR (Power): (below RJ-45)
ON = Link; Flashing = Activity Wide Input Power Supplies
• Auto-Negotiation FX-Link/Act (Fiber Link/Activity):
(Upper Left on RJ-45) SPS-2460-SA
• Fixed Full-Duplex on fiber ON = Link; Flashing = Activity Stand-Alone Power Supply
TX-Link/Act (Copper Link/Activity):
• Auto-MDI/MDIX (Upper Right on RJ-45) Mounting Options
ON = Link; Flashing = Activity
• Automatic Link Restoration WMBM
Dimensions Width: 1.8” [46 mm] Wall Mount Bracket for Mini
• Far-End-Fault (FEF) Depth: 3.3” [85 mm]
Height: 0.85” [22 mm] M-MCR-01
• Connect to legacy network equipment Power Consumption 2.6 Watts
DRBM
• Eliminate Collision Domains Power Supply External AC/DC required; +12VDC, 0.5A min DIN Rail Mount Bracket for Mini
RMBM
Rack Mount Bracket for Mini, use with
UL Listed, cUL Listed (Canada)
FCC Class A, CISPR22/EN55022 Power Supply Included
Class A, EN55024, CE Mark To order the corresponding country
Warranty Lifetime specific power supply, add the
of the SKU; Ex: M/E-TX-FX-02-NA
-NA = Country Code
-NA = North America
-LA = Latin America
-EU = Europe
-SA = South Africa
-JP = Japan
-OZ = Australia
-BR = Brazil

M/E-ISW-FX-01(xx) & M/E-ISW-FX-01AC(xx)
Hardened Mini Fast Ethernet Media Converter
Industrial Mini Media Converters provide a cost-effective method for

integrating fiber optic cabling into industrial or outdoor 10/100 UTP Ordering Info
Ethernet networks. Featuring a wide operating temperature range, low- AC = AC powered option available
voltage power, multiple mounting methods and Transition Networks’ M/E-ISW-FX-01 or M/E-ISW-FX-01AC
Lifetime Warranty, these problem solvers are guaranteed to be trouble- M/E-ISW-FX-01
free in harsh outdoor or industrial applications. 10/100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1310 nm multimode (ST)
M/E-ISW-FX-01(SC)
M/E-ISW-FX-01 10/100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1310 nm multimode (SC)
M/E-ISW-FX-01(MMLC)
Features Specifications 10/100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1310 nm multimode (LC)
Standards IEEE 802.3 [2 km/1.2 mi.] Link Budget: 11.0 dB
• Unit and Port LEDs provide quick status
Status LEDs PWR (Power): (below RJ-45) M/E-ISW-FX-01(SM)
• Auto-Negotiation FX-Link/Act (Fiber Link/Activity): 10/100Base-TX (RJ-45) [100 m/328 ft.]
(Upper Left on RJ-45) to 100Base-FX 1310 nm single mode (SC)
• Fixed Full-Duplex on fiber ON = Link; Flashing = Activity [20 km/12.4 mi.] Link Budget: 19.0 dB
• Auto-MDI/MDIX (Upper Right on RJ-45) M/E-ISW-FX-01(SMLC)
ON = Link; Flashing = Activity 10/100Base-TX (RJ-45) [100 m/328 ft.]
• Link Pass Through to 100Base-FX 1310 nm single mode (LC)
Dimensions Width: 1.8” [46 mm] [20 km/12.4 mi.] Link Budget: 19.0 dB
• Automatic Link Restoration Depth: 3.3” [85 mm]
Height: 0.85” [22 mm] M/E-ISW-FX-01(100)
• Far-End-Fault (FEF) 10/100Base-TX (RJ-45) [100 m/328 ft.]
Power Consumption 2.5 Watts to 100Base-FX 1310nm TX/1550nm RX single
• DC and AC powered models Power Supply 12-48 VDC fiber single mode (SC) [20 km/12.4 mi.]
AC version also supports 22-36 VAC ± 10% Link Budget: 18.0 dB
• Overload Current Protection Overload Current Protection
M/E-ISW-FX-01(101)
Reverse Polarity Protection
10/100Base-TX (RJ-45) [100 m/328 ft.]
• Reverse Polarity Protection to 100Base-FX 1550nm TX/1310nm RX single
Storage: -40°C to 85°C fiber single mode (SC) [20 km/12.4 mi.]
• Easily integrate fiber into industrial,
Humidity: 5% to 95% (non-condensing) Link Budget: 18.0 dB
hardened, or outdoor locations to reach Altitude: 0 – 10,000 ft.
devices at the edge of the network M/E-ISW-FX-01AC
Weight 2 lbs. [0.90 kg] 10/100Base-TX (RJ-45) [100 m/328 ft.]
• Tiny mechanical size allows use in Compliance FCC Class A, CISPR22/EN55022 to 100Base-FX 1310 nm multimode (ST)
small enclosures Class A, EN55024, CE Mark [2 km/1.2 mi.] Link Budget: 14.0 dB
Warranty Lifetime M/E-ISW-FX-01AC(SC)

• No configuration required 10/100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1310 nm multimode (SC)
• Available with LC, ST or SC fiber [2 km/1.2 mi.] Link Budget: 14.0 dB
interfaces and is available for
M/E-ISW-FX-01AC(MMLC)
multimode or single mode fiber;
10/100Base-TX (RJ-45) [100 m/328 ft.]
Single fiber options are also available to 100Base-FX 1310 nm multimode (LC)
M/E-ISW-FX-01AC(SM)
10/100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1310 nm single mode (SC)
M/E-ISW-FX-01AC(SMLC)
10/100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1550 nm single mode (LC)
AC Power Supplies
SPS-UA12DHT
Mounting Options (100-240 VAC input
0°C to +70°C Operating temperature)
WMBM
25083
Wall Mount Bracket for Mini Converters
Universal AC/DC Input DIN Rail Mountable
+12 VDC Power Supply

M/GE-T-xX-01
Mini Gigabit Ethernet Media Converter
The Mini Media Converters provide a cost-effective method for

integrating fiber optic cabling into a Gigabit UTP environment. With Ordering Information
its miniature size, the Mini offers a space saving alternative while it M/GE-T-SX-01
converts copper to fiber within 65% less space. 1000Base-T (RJ-45) [100m/328 ft.]
[62.5/125 µm fiber: 220 m/722 ft.] [50/125
µm fiber: 550 m/1804 ft.] Link Budget: 7.0 dB
M/GE-T-LX-01
1000Base-T (RJ-45) [100m/328 ft.]
to 1000Base-LX 1310m single mode (SC)
[10 km/6.2 mi.] Link Budget: 10.5db
M/GE-T-SX-01
M/GE-T-SFP-01
1000Base-T (RJ-45) [100m/328 ft.]
to SFP slot (empty)
Features Specifications Optional Accessories (sold separately)

Standards IEEE 802.3z
IEEE 802.3ab SFP Modules
• Auto-MDI/MDIX Status LEDs PWR (Power) below RJ-45: On = Power
Wide Input DC Power Supply
FX-Link/Act (Fiber Link / Activity) Upper Left on RJ-45:
• Automatic Link Restoration On = link, Flashing = Activity SPS-2460-SA
TX-Link/Act (Copper Link / Activity) Upper Right on 24VDC to 60VDC input Stand-alone
• Interoperable with other RJ-45: On = link, Flashing = Activity Power Supply
1000Base-T/SX/LX NICs or switch ports Dimensions Width: 1.8” [46 mm]
Depth: 3.3” [85 mm]
• Status LEDs for easy monitoring
Height: 0.85 [22 mm] Mounting Options
• Supports SFP modules Power Consumption 2.6 Watts WMBM
Wall Mount Bracket for Mini
• Supports Jumbo Frames up to Power Supply External AC/DC required; +12VDC, 0.5A
13312bytes Power Input 7.5VDC to 13.9VDC M-MCR-01
• 65% smaller than standard media Storage: -15°C to 65°C DRBM
converter Humidity: 5% to 95% (non-condensing) DIN Rail Mount Bracket for Mini
Altitude: 0 – 10,000 ft. RMBM
• Extend Network Distance
Weight 2 lbs. [0.90 kg] Rack Mount Bracket for Mini, use with
• Low-Latency Design RMS19-SA4-01 and/or E-MCR-05
Compliance Safety: Wall Mount Power Supply, UL Listed,
cUL Listed (Canada), FCC Class A, CISPR22 / EN55022 Class A,
EN55024, CE Mark
Warranty Lifetime

of the SKU; Ex: M/GE-T-SX-01-NA
-NA = Country Code
-NA = North America
-LA = Latin America
-EU = Europe
-SA = South Africa
-JP = Japan
-OZ = Australia
-BR = Brazil

M/GE-PSW-xX-01
The Mini Media Converters provide a cost-effective method for

integrating fiber optic cabling into a 10/100/1000 UTP environment. Ordering Information
With its miniature size, the Mini offers a space saving alternative while M/GE-PSW-SX-01(ST)
it converts copper to fiber within 65% less space. 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
to 1000Base-SX 850nm multimode (ST)
[62.5/125 µm fiber: 220 m/722 ft.]
Link Budget: 7.0 dB [50/125 µm fiber: 550
m/1804 ft.] Link Budget: 7.0 dB
M/GE-PSW-SX-01
M/GE-PSW-SX-01 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
[62.5/125 µm fiber: 220 m/722 ft.]
Link Budget: 7.0 dB [50/125 µm fiber: 550
m/1804 ft.] Link Budget: 7.0 dB
Features Specifications M/GE-PSW-LX-01
Standards IEEE 802.3 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
• Unit & Port LEDs allow for quick status to 1000Base-LX 1310nm single mode (SC) [10
information Max Frame Size Untagged: 1632 bytes km/6.2 mi.] Link Budget: 10.5 dB
Tagged: 1628 bytes
• Auto-Negotiation Status LEDs PWR (Power): (below RJ-45)
ON = Lit for normal operation
• Fixed Full-Duplex on fiber FX-Link/Act (Fiber Link/Activity):
(Upper Left on RJ-45)
• Auto-MDI/MDIX ON = Link; Flashing = Activity Wide Input (24 - 60 VDC) Power Supply
• Fixed Link Pass Through
(Upper Right on RJ-45) SPS-2460-SA
• Automatic Link Restoration ON = Link; Flashing = Activity Stand-Alone Power Supply
• Space saving design Depth: 3.3” [85 mm] Mounting Options
Height: 0.85” [22 mm]
• Connect Legacy Networking WMBM
Power Consumption 3.15 Watts Wall Mount Bracket for Mini
Equipment: Connect an existing 10/100
Mbps device to 1000 Mbps devices. Power Supply Unit accepts 5 VDC to 28 VDC M-MCR-01
Wall Mount AC adapter: 12 VDC 400mA 18-Slot Powered Mini Chassis
DRBM
DIN Rail Mount Bracket for Mini
Altitude: 0 – 10,000 ft. RMBM
Weight 2 lbs. [0.90 kg] Rack Mount Bracket for Mini, use with
Compliance Safety: Wall Mount Power Supply, UL Listed,
cUL Listed (Canada) Note: Long Haul single mode and Single Strand
FCC Class A, CISPR22/EN55022 single mode are available upon request.
Class A, EN55024, CE Mark
Warranty Lifetime

of the SKU; Ex: M/GE-PSW-SX-01-NA
-NA = Country Code
-NA = North America
-LA = Latin America
-EU = Europe
-SA = South Africa
-JP = Japan
-OZ = Australia
-BR = Brazil

M/GE-PSW-SFP-01
10/100/1000Base-T to 1000Base-X
The Mini Media Converter provides a cost-effective method for

integrating fiber optic cabling into a 10/100/1000 UTP environment. Ordering Information
With its miniature size, the Mini offers a space saving alternative while M/GE-PSW-SFP-01
converting copper to fiber. 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
to 100/1000Base-X SFP Slot (empty)
The M/GE-PSW-SFP-01 provides one 10/100/1000 RJ-45 port and one
dual speed Small Form-Factor Pluggable (SFP) hot-pluggable port with
autosense, with 100M or 1000M SFP transceivers. A wide variety of
SFP optical transceivers is available to offer a full range of deployment USBC-AM-DC
USB 2.0 cable male to barrel connector
options over multimode or single mode fiber, making this mini the ideal
solution for fiber integration in both Fast Ethernet and Gigabit Ethernet WMBM
M/GE-PSW-SFP-01 Wall Mount Bracket for Mini
environments.
M-MCR-01
Features Specifications DRBM
Standards IEEE 802.3z DIN Rail Mount Bracket for Mini
• Unit & Port LEDs allow for quick status
IEEE 802.3ab RMBM
information
Status LEDs PWR (Power) below RJ-45: On = Power Rack Mount Bracket for Mini, use with
• Auto-Negotiation FX-Link/Act (Fiber Link / Activity) Upper Left on RMS19-SA4-01 and/or E-MCR-05
RJ-45: On = link, Flashing = Activity
• Fixed Full-Duplex on Fiber TX-Link/Act (Copper Link / Activity) Upper Right on
RJ-45: On = link, Flashing = Activity
Depth: 3.3” [85 mm]
• Automatic Link Restoration Power Supply Included
Height: 0.85" [22 mm]
• Jumbo Frame (up to 10240Bytes) To order the corresponding country
• USB Power Option, requires the use of a Power Supply External AC/DC required; +12VDC, 0.5A extension from the list below to the end
USB to DC barrel connector cable Power Input 4.5VDC to 14VDC of the SKU; Ex: M/E-PSW-SFP-01-NA
(USBC-AM-DC) Environment Operating: 0°C to 50°C -NA = Country Code
Storage: -15°C to 65°C -NA = North America
-LA = Latin America
-EU = Europe
Weight 2 lbs. [0.90 kg] -SA = South Africa
-JP = Japan
Compliance Safety: Wall Mount Power Supply, UL Listed, -OZ = Australia
cUL Listed (Canada) -BR = Brazil
FCC Class A, CISPR22 / EN55022 Class A, EN55024, CE Mark
Warranty Lifetime

M/GE-ISW-xx-01
Hardened Mini 10/100/1000 Bridging Media
Converter
This hardened Gigabit Mini Media Converter provides a cost-effective

method for integrating fiber optic cabling into hardened or outdoor Ordering Information
10/100/1000 UTP environments. With its miniature size, the Mini offers M/GE-ISW-SX-01
a space saving alternative while it converts copper to fiber with the Hardened Mini 10/100/1000Base-T (RJ-45)
smallest footprint available in the industry. to 1000Base-SX, SC, multimode, [62.5/125 um:
220 m/722 ft.] [50/125 um: 550 m/1804 ft.]
The M/GE-ISW-xx-01 featured wide operating temperature range, Link Budget: 7.5 dB
low-voltage input power, multiple mounting methods, and Transition M/GE-ISW-LC-01
Networks’ Lifetime Warranty. These problem solvers will ensure Hardened Mini 10/100/1000Base-T (RJ-45)
a quick and trouble-free installation in harsh outdoor or hardened to 1000Base-SX, LC, multimode, [62.5/125
M/GE-ISW-xx-01 um: 220 m/722 ft.] [50/125 um: 550 m/1804
applications. ft.] Link Budget: 8.0 dB
M/GE-ISW-LX-01
Features Specifications Hardened Mini10/100/1000Base-T (RJ-45)
to 1000Base-LX, SC, single mode,
• Unit & Port LEDs allow for quick status Standards IEEE 802.3 [10 km/6.2 mi.] Link Budget: 10.5 dB
information IEEE 802.3u M/GE-ISW-SFP-01
IEEE 802.3z Hardened Mini10/100/1000Base-T (RJ-45) to
• Auto-Negotiation IEEE 802.3x 100/1000Base-X Open SFP Slot
• Fixed Full-Duplex on Fiber Max Frame Size 10240 bytes
• Auto-MDI-MDIX on copper port Status LEDs PWR (Power): (below RJ-45) ON = Lit for normal operation Optional Accessories (sold separately)
FX-Link/Act (Fiber Link/Activity): (Upper Left on RJ-45)
• Active Link Pass Through On = link; Flashing = Activity
TX-Link/Act (Copper Link/Activity): (Upper Right on RJ-45) SPS-UA12DHT
• Jumbo Frame (up to 10240Bytes) On = link; Flashing = Activity 12 VDC, 18W, External AC/DC Desktop Power
Supply
• Supports DC and AC Input Power via Dimensions Width: 1.8” [46 mm]
terminal block Depth: 3.3” [85 mm] 25083
Height: 0.85” [22 mm] 10.8 – 13.2 VDC, 24W, External AC/DC DIN Rail
-- Includes barrel connector pig-tail cable Mount Power Supply
• Multiple mounting options WMBM
Power Input Unit accepts 12 - 48 VDC or 24 – 36VAC Wall Mount Bracket Mini
-- DIN Rail clip and Velcro included (External power supplies sold separately)
-- Wall mount bracket sold separately RMBM
Environment Operating: -40°C to +75°C Rack Mount Bracket for Mini Media
• Overload Current Protection Storage: -40°C to +85°C Converters in the RMS19-SA4-02
• Reverse Polarity Protection Altitude: 0 – 10,000 ft. SFP Modules
Supports Hardened Grade SFP Modules
Compliance FCC Class A, CISPR22/EN55022 Class A, EN55034, CE Mark
Warranty Lifetime

M/GE-ISW-SFP-01-PD
Hardened Mini PD 10/100/1000 Bridging
Media Converter
This hardened Gigabit Mini PD Media Converter is a PoE powered

device which provides a cost-effective method for integrating Ordering Information
fiber optic cabling into hardened or outdoor 10/100/1000 UTP M/GE-ISW-SFP-01-PD
environments. The device is powered through the RJ-45 copper port PoE Powered Hardened
when connected to power sourcing equipment, meaning no separate Mini10/100/1000Base-T (RJ-45) to
100/1000Base-X Open SFP Slot
power connection is required. With its miniature size, the Mini offers a
space saving alternative while it converts copper to fiber within a very
small footprint. Optional Accessories (sold separately)
M/GE-ISW-SFP-01-PD SFP Modules

The M/GE-ISW-SFP-01-PD supports a wide operating temperature Supports Hardened Grade SFP Modules
range, is powered through the copper cabling, offers multiple mounting
methods, and is supported by Transition Networks’ Lifetime Warranty.
This problem solver will alleviate power concerns and ensure a quick
and trouble-free installation in harsh outdoor or hardened applications.
• IEEE 802.3af PD Power Input from RJ-45 Standards IEEE 802.3
TP interface IEEE 802.3u
IEEE 802.3z
• Unit & Port LEDs allow for quick status IEEE 802.3x
information IEEE 802.3af
• Auto-Negotiation Max Frame Size 10240 bytes
Status LEDs PWR (Power): ON = Lit for normal operation
• Fixed Full-Duplex on Fiber
FX-Link/Act (Fiber Link/Activity): On = link; Flashing = Activity
• Auto-MDI/MDIX on copper port TX-Link/Act (Copper Link/Activity): On = link; Flashing = Activity
• Active Link Pass Through
Depth: 3.3” [85 mm]
• Jumbo Frame (up to 10240 bytes) Height: 0.85” [22 mm]
• Multiple mounting options
-- DIN Rail clip and Velcro included Power Input IEEE 802.3af supplied through TP RJ-45
PoE Power Classification Class 1 Powered Device (0.44 Watts - 3.84 Watts)
-- Wall mount bracket sold separately
Compliance FCC Class A, CISPR22/EN55022 Class A, EN55024, CE Mark
Warranty Lifetime

Rugged Network Solutions for
Security & Surveillance Applications
• Secure Access Systems
• Indoor/Outdoor Surveillance
• Retail Environments
• Traffic & Vehicle Monitoring
Surveillance & Secure

Access Configuration
Transition Networks UTP w/ PoE

PoE+ Switches
Main Office
Network Camera
IP PoE UTP w/ PoE

Network Camera
Network Camera
Control Center
UTP w/ PoE
Door Lock Wireless

w/ Card Reader Access Point
Transition Networks’ industrial grade network switches combine the distance advantages of
fiber-optic connections with Power-over-Ethernet (PoE) to connect and power IP surveillance
cameras. In addition, these switches can be used in security access applications to
communicate with RFID readers and control door locks and turnstiles.
• Rugged hardware performance for harsh environments and outdoor

enclosures where PoE+ is needed
• Highly flexible for a variety of PoE+ applications
• Offers advanced Ethernet network management, redundancy, availability

and network security features
SISTP1040-242-LRT

MIL-L100i
(1) Port PoE Mid-Span Injector
Transition Networks’ Power-over-Ethernet solutions deliver unified supply of
data, voice, and video as well as electrical power through a single source by Ordering Information
sending power over standard CAT5 and above twisted pair cables. Power- MIL-L100i
over-Ethernet simplifies installation and eliminates the need to run separate 10/100Base-T 1-Port PoE Mid-Span Injector
power cords and LAN cables to each Access Point or port locations.
Our PoE products provide organizations with affordable, easy-to-use solutions
that enable them to migrate their network infrastructure to support a growing
number of advanced cost-saving, performance enhancing applications,
such as streamlining wireless, VoIP, Network IP camera deployments, and To order the corresponding country
centralized power backup solutions. Whether on a factory floor or in an extension from the list below to the end
enterprise facility, running power to hard to reach locations with Transition of the SKU
Networks’ Power-over-Ethernet solutions significantly reduces cabling and Ex: MIL-L100i-NA
outlet requirements while providing the lowest total cost of ownership. -NA = Country Code
-NA = North America
-LA = Latin America
-EU = Europe
-SA = South Africa
Features Specifications -JP = Japan
-OZ = Australia
Standards IEEE 802.3af -BR = Brazil
• Ensures uninterrupted network operation by IEEE 802.3
providing a “power safe” path to the user IEEE 802.3u
• Intelligent detection process to detect Ports (1) DATA IN RJ-45 Ethernet Port
(1) DATA OUT PoE Injector RJ-45
Power-over-Ethernet enabled terminals and Ethernet Port
protect legacy endpoints
Status LEDs Power: PoE power is being injected
• Furnishes easy and cost-effective installation into the Data Out port
with fewer cables and electrical outlets Cable Requirements 10Base-T: 2-pair UTP/STP Cat.3,4,
5 cable EIA/TIA-568100-
• Provides one central secure location for ohm(100 m)
power 100Base-TX: 2-pair UTP/STP Cat.5 cable
EIA/TIA-568 100-ohm(100 m)
• IEEE 802.3af compliant
• Ensures safe delivery of power to existing Depth: 2.3” [60 mm]
legacy devices as well as power-enabled
terminals Power Output -48 VDC, 300 mA
Power Input AC 100~240V, 50~60 Hz, 0.3A
• Avoids altering existing wiring and does not
damage cabling infrastructure already in
Storage: 0°C to 70°C
place Humidity: 5% to 95% (non-condensing)
• Power delivery over Ethernet cables does Weight 0.44 lbs. [0.2 kg]
not cause data degradation or loss of data Compliance Safety: UL, cUL, CE/EN60950
integrity Emissions: FCC Class B, CE Mark
Warranty Lifetime
• Easiest way to add support of PoE to an
existing network without replacing existing
equipment

L1000i-at
(1) Port PoE+ Mid-Span Injector
Transition Networks’ L1000i-at is a 1-port 10/100/1000Base-T PoE+

midspan injector which provides a simple, cost-effective, fully IEEE Ordering Information
802.3at compliant solution to upgrade existing infrastructure with PoE+. L1000i-at
Powering high-powered PoE+ enabled network devices, such as PTZ (1) 10/100/1000Base-T port PoE+ Injector
dome network cameras, can be done without the need to install power
outlets and electrical cabling.
PoE technology allows IP phones, wireless access points, and security Power Supply Included
network cameras to receive power, along with data, over standard
Ethernet cables, leaving the network infrastructure completely unaltered. specific power supply, add the
PoE technology also allows for easier installation in areas where power extension from the list below to the end
cabling and outlets are unavailable, thereby reducing installation costs. of the SKU
Ex: L1000i-at-NA
Midspan injectors offer users the ability to take advantage of PoE -NA = Country Code
technology while protecting investments they’ve made in purchasing, -NA = North America
-LA = Latin America
configuring, and deploying non-PoE supported devices such as standard -EU = Europe
Ethernet switches. -UK = United Kingdom
-SA = South Africa
-JP = Japan
-OZ = Australia
-BR = Brazil
• Power-over-Ethernet Injector for Standards IEEE 802.3
10/100/1000Base-T IEEE 802.3U
IEEE 802.3ab
• Remote Power Feeding IEEE 802.3af
IEEE 802.3at
• Overload and short circuit protection Ports (1) DATA IN RJ-45 Ethernet Port
(1) DATA OUT PoE Injector RJ-45
• Mixes Ethernet and power on the RJ-45 port Ethernet Port
• Delivers power up to 100 meters Status LEDs AC Power
Feeding Power
• Light weight and compact size Cable Requirements 10Base-T:
2-pair UTP/STP Cat.3,4,5 cable
EIA/TIA-568 100-ohm(100 m)
• Plug-and-play 100Base-TX: 2-pair UTP/STP Cat.5 cable
(Cat. 5e recommended); EIA/
• IEEE 802.3at and IEEE 802.3af compliant TIA-568 100-ohm(100 m)
1000Base-T: 4-pair UTP/STP Cat.5e or
above cable; EIA/TIA-568
100-ohm, 100m
Depth: 5.51” [140 mm]
Height: 1.42” [36 mm]
Power Input AC input voltage range: 100 – 240 VAC;
50 – 60Hz 0.72A
Power Output 55V @ 0.6A
Compliance Safety: UL, cUL, CE/EN60950-1
Emissions: FCC Class B, CE Mark
Warranty Lifetime
SI-IES-1200-LRT
Unmanaged Hardened PoE+ Injector
(1) 10/100/1000Base-T Port + (1) 10/100/1000Base-T PoE+ Port
The SI-IES-1200-LRT is an unmanaged hardened PoE+ injector

that adds up to 30 Watts of power on a network segment. SI-IES-1200-LRT
(1) 10/100/1000Base-T Port
Injectors are commonly used to power PoE devices in locations + (1) 10/100/1000Base-T PoE+ Port
where a power source does not exist. The injector has
redundant input power connections, and a fault alarm relay to
ensure safe reliable operation in temperatures between -40°C Industrial Power Supplies:
and +75°C. 25130
Transition Networks’ hardened PoE injectors are certified to Input: 85-264VAC, 120-370VDC
operate reliably in harsh environments such as those found
on factory floors, outdoor enclosures or other challenging
environments.
• IEEE 802.3at PoE+ to supply 30 Watts Standards IEEE 802.3
IEEE 802.3u
• IEEE 802.3af Compatible IEEE 802.3ab
IEEE 802.3at
• Non-blocking architecture IEEE 802.3af
• Compact size Connectors (1) DATA IN RJ-45 Ethernet Port

(1) DATA OUT PoE+ RJ-45 Ethernet
• IP30 housing protection Port 30 Watts
Status LEDs PWR1 (Power): ON=primary power
• Link Pass Through connected
PWR2 (Power): ON=backup power
• Extended operating temperature connected
(-40°C to 75°C)
• DIN Rail mount / optional wall mount Depth: 3.7” [95 mm]
Height: 5.5” [140 mm]
brackets included
Power Consumption 3.53 Watts (No PoE)
33.36 Watts (1 port PoE)
Power Input 24-48VDC
Compliance Safety: UL508
FCC Class A, CE Mark, EN61000-4,
EN61000-6-2, EN61000-4-2 (ESD),
EN61000-4-3 (RS), EN61000-4-4 (EFT),
EN61000-4-5 (Surge), EN61000-4-6(CS)
EN61000-4-8 (Magnetic Field),
IEC60068-2-27(Shock),
Warranty Lifetime
SI-IES-111D-LRT
Unmanaged Hardened PoE+ Injector/Converter
(1) 100/1000Base-X SFP Port + (1) 10/100/1000Base-T PoE+ Port
The SI-IES-111D-LRT is an unmanaged hardened PoE+ injector that SI-IES-111D-LRT
(1) 100/1000Base-X SFP Port
adds up to 30 Watts of power on a network segment. The gigabit speed + (1) 10/100/1000Base-T PoE+ Port
SFP port provides the ultimate flexibility by allowing fiber SFP uplink
ports with varying communication distances. Injectors are commonly
used to power PoE devices in locations where a power source does not Industrial Power Supplies:
exist. 25130
Transition Networks’ hardened PoE injectors are certified to operate Input: 88-264VAC, 120-370VDC
Output: 48-55VDC, 0.83A, 39.8Watts
reliably in harsh environments such as those found on factory floors,
25131
outdoor enclosures or other challenging environments. The injector is Input: 88-264VAC, 124-370VDC
safe for reliable operation in temperatures between -40°C and +75°C. Output: 48-55VDC, 1.6A, 76.88Watts
• IEEE 802.3at PoE+ to supply 30 Watts Standards IEEE 802.3
IEEE 802.3x
per port IEEE 802.3u
IEEE 802.3ab
• IEEE 802.3af Compatible IEEE 802.3at
IEEE 802.3z
• Supports dual speed for SFP slot
IEEE 802.3af
• Non-blocking architecture Connectors (1) DATA IN SFP Ethernet Port
(1) DATA OUT PoE+ RJ-45 Ethernet Port 30 Watts
• Compact size
Status LEDs Copper Port: Link/ACT
• IP31 housing protection Copper Port: Gigabit Transmission
SFP Port: Link/ACT
• Link Pass Through PoE Power
Input Power
• Extended operating temperature Dimensions Width: 1.44” [36.7 mm]
(-40°C to 75°C) Depth: 3.72” [94.5 mm]
Height: 4.26” [108.4 mm]
• DIN Rail mount / optional wall mount brackets
included 32.725 Watts (1 port PoE)
• Supports full/half duplex flow control Power Input 48-57VDC
Higher Voltage (50-53VDC) may be required for
• Supports Auto-MDI/MDI-X some high powered PD loads
• Supports auto-negotiation
• Supports store-and-forward transmission Storage: -40°C to 85°C
Class I, Division 2, Groups A, B, C, and D Hazardous
Locations, FCC Class A, CE Mark, EN61000-4,
EN61000-6-2, EN61000-4-2 (ESD),
EN61000-4-3 (RS), EN61000-4-4 (EFT),
EN61000-4-5 (Surge), EN61000-4-6(CS)
EN61000-6-4 (EMC),
IEC60068-2-27(Shock),
IEC61850-3
Warranty Lifetime
SI-IES-121D-LRT
Unmanaged Hardened PoE+ Injector/Converter
(1) 100/1000Base-X SFP Port + (2) 10/100/1000Base-T PoE+ Ports
The SI-IES-121D-LRT is an unmanaged hardened PoE+ injector/ SI-IES-121D-LRT
converter that adds up to 30 Watts of power on two network (1) 100/1000Base-X SFP Port
segments. The gigabit speed SFP port provides the ultimate + (2) 10/100/1000Base-T PoE+ Ports
flexibility by allowing fiber SFP uplink ports with varying
communication distances. Injectors are commonly used to power Optional Accessories (sold separately)
PoE devices in locations where a power source does not exist.
Industrial Power Supplies:
Transition Networks’ hardened PoE injectors are certified to
25131
operate reliably in harsh environments such as those found Input: 88-264VAC, 124-370VDC
on factory floors, outdoor enclosures or other challenging Output: 48-55VDC, 1.6A, 76.88 Watts
environments. The injector is safe for reliable operation in
temperatures between -40°C and +75°C.
• IEEE 802.3at PoE+ to supply 30 Watts
IEEE 802.3x
per port IEEE 802.3u
IEEE 802.3ab
• IEEE 802.3af Compatible IEEE 802.3at
IEEE 802.3z
• Supports dual speed for SFP slot IEEE 802.3af
• Non-blocking architecture Connectors (1) DATA IN SFP Ethernet Port
(2) DATA OUT PoE+ RJ-45 Ethernet Port 30 Watts
• Compact, space saving, size
Status LEDs Copper Port: Link/ACT
• IP31 of housing protection Copper Port: Gigabit Transmission
SFP Port: Link/ACT
• Link Pass Through PoE Power
Input Power
• Extended operating temperature Dimensions Width: 1.44” [36.7 mm]
(-40°C to 75°C) Depth: 3.72” [94.5 mm]
Height: 4.26” [108.4 mm]
• DIN Rail mount / optional wall mount brackets
included 63.5 Watts (2 ports PoE)
• Supports full/half duplex flow control Power Input 48-57VDC
Higher Voltage (50-53VDC) may be required for
• Supports Auto-MDI/MDI-X some high powered PD loads
• Supports auto-negotiation
• Supports store-and-forward transmission Storage: -40°C to 85°C
Class I, Division 2, Groups A, B, C, and D Hazardous
Locations, FCC Class A, CE Mark, EN61000-4,
EN61000-6-2, EN61000-4-2 (ESD),
EN61000-4-3 (RS), EN61000-4-4 (EFT),
EN61000-4-5 (Surge), EN61000-4-6(CS),
EN61000-6-4 (EMC),
IEC60068-2-27(Shock),
IEC61850-3
Warranty Lifetime
25148
Industrial Power Supply
Specifications
Connector 4-pin DIN plug (see plug assignment) Ordering Information
Cable UL1185 16AWG 25148
90 ~ 264 VAC; 127 ~ 370 VDC
Output Voltage 48V (Output voltage set at point measure by plug (Country specific power cord included)
terminal +50% load)
Rated Current 1.87A
Current Range 0-1.87A
25148
Rated Power 90W (max)
Ripple & Noise 240mVp-p (max) (Measured at 20MHz by using a 12”
twisted pair terminated with a 0.1uf &47uf
capacitor)
Voltage Tolerance ±2.5% (Includes set up tolerance, line regulation,
Features load regulation)
Line Regulation ±1.0% (Line regulation is measured from low line to
• Universal AC input/full range high line at rated load)
Load Regulation ±2.5%
• 3 pole AC inlet IEC320-C14
Setup, Rise Time 1000ms, 50ms/230VAC; 1000ms, 50ms/115VAC at
• Built-in active power factor controller full load (Length of setup time is measured at first
cost start. Turning ON/OFF the power supply may
function lead to increase of the setup time)
• Industrial (-30°C to +70°C) operating Hold Up Time 20ms/230VAC typ; 20ms/115VAC at full load typical
temperature Input Voltage 90-264VAC, 127-370VDC (Derating may be needed
under low input voltages. Check the derating curve
• No load power consumption ≤0.15 for more details.)
Watts
Input Frequency Range 47-63 Hz
• Energy efficiency Level VI Power Factor PF>0.91/230VAC typical; PF>0/95/115VAC at full load
typical
• Compliant with EIASA 2007/DoE,
NRCan, AU/NZ MEPS, EU ErP and CoC Efficiency 91% typical
Version 5 AC Current 1.3A/115VAC typical; 0.6A/230VAC typical
Inrush Current 70A/230VAC (max)
• Class 1 power (with earth pin)
Leakage Current 1mA/240VAC (max)
• Short circuit/overload/over voltage/over Withstand Voltage I/P-O/P: 3KVAC, I/P-FG: 2KVAC. O/P-FG: 0.5KVAC
temperature protection
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: 100M
• Fully enclosed 94V-0 flame retardant Ohms/500VDC/25°C/70%RH
plastic case Protection Overload: 110-150% rated output power (Hiccup mode,
recovers automatically after fault condition is removed)
• LED power on indicator Overvoltage: 105-135% rated output voltage (Shut down
o/p voltage, re-power on to recover)
Over Temperature: Shut down o/p voltage, re-power on
to recover
Depth: 2.36” [60 mm]
Height: 1.26” [32 mm]
Environment Operating: -30°C to +70°C (See derating curve)
MTBF 348.7K hours min MIL-HDBK-217F (25°C)
Vibration 10-500Hz, 2G 10min/1 cycle period for 60 min each
along X,Y,Z axes
Compliance Safety: UL60950-1, CSA C22.2, TUV EN60950-1,
BSMI CNS 14336, CCC Gb4943, PSE J60950-1,
AS/NZS 60950.1 approved
Emmisions: EN55022 class B, EN61000-3-2,3,
FCC Part 15/CISPR22 class B, CNS13438 class B,
GB9254, GB17625.1
Immunity: EN61000-4-2,3,4,5,6,8,11 light industry
level, criteria A
Global Presence
transition.com/contact
All trademarks are the property of their respective owners. Technical information is subject to change without notice.
www.transition.com ©2016 Transition Networks, Inc. Transition Networks • 902015MC (0617)

Catalog Media Converters, Extenders

Uploaded by

Document Informationclick to expand document information

Document Informationclick to expand document information

Copyright:

Available Formats

Catalog Media Converters, Extenders

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalog Media Converters, Extenders

Uploaded by

Copyright:

Available Formats

Catalog

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog

• Enterprise Campus Environments • Government and Municipal Agencies

FLOOR 3 REMOTE BUILDING 1

Why Conversion? Product Features

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 2

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 3

The ION Platform consists of a 19-slot, 2-slot, and 1-slot chassis,

Power Supply Included

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 4

The ION 19-slot chassis can support up to

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 5

Applications for this type of fault alarm

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 6

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 7

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 8

Specifications Access Methods

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 9

Character #1 Characters #6, 7, 8, 9

Additional Expandable Characters (xx)

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 10

The ION C2110 device provides an interface between 100Base-TX

Standards IEEE 802.3 C2110-1014

• Write operation includes:

-- Select advertising modes when

Note: Manageable Features are available when

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 11

Standards IEEE 802.3u C2210-1014

-- Force 10 Mbps or 100 Mbps Warranty Lifetime

-- Select advertising modes when

Note: Manageable Features are available when

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 12

Standards IEEE 802.3 C2220-1040

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 13

This fiber to fiber converter card is a protocol independent device that

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 14

• Write operation includes:

Note: Manageable Features are available when

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 15

The ION C3210 device provides an interface between

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 16

The ION 3220 Series of Network Interface Devices (NIDs) are a

Standards IEEE 802.3 *C3221-1040

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 17

• MEF 9, 14 and 21 certified

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 18

The C4110 is a 10Gbps protocol independent media converter with

• Use as a fiber mode converter

• Use as a specific wavelength CWDM

• Also available as a stand-alone converter

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 19

The C4120 is a 10 Gigabit Ethernet copper to fiber media converter. It

• Automatic Link Restoration Dip Switches SW1: Copper Loopback

www.transition.com Transition Networks • Media Converters, Extenders, & NIDs Catalog | 20

The T1/E1 copper to fiber network interface device (NID) provides a