HEAVY

LIFTING
TECHNOLOGY

THE RIGHT TOOL MAKES

ALL THE DIFFERENCE
 THE RIGHT TOOL MAKES
ALL THE DIFFERENCE
Enerpac heavy lifting technology products are put to work under the most intense and demanding
conditions. That’s why we never compromise. So you can rely on quality and precision every time, giving
you the safest and most efficient path to a successful lift.

Enerpac heavy lifting technology combines technical excellence with proven performance – every day,
every year, year after year. We believe that customers shouldn’t have to compromise – they can rest easy
knowing that even in the most complex situations, their reputations and safety are protected by the most
trusted products available.

Infrastructure Manufacturing Mining Oil & Gas Power Generation

Our Approach .................................................. 3

Solution Consultation ...................................... 4
Design & Manufacturing .................................. 5
Testing & Training ............................................. 6
On-Demand Support ....................................... 7
Common Applications
• Infrastructure .......................................... 8-9
• Infrastructure ....................................... 10-11
• Manufacturing ..................................... 12-13
• Mining .................................................. 14-15
• Oil & Gas .............................................. 16-17
• Power Generation ................................ 18-19
• Power Generation ................................ 20-21

Standard Products ......................................... 22

Custom Solutions ........................................... 23

2
FROM SIMPLE TO COMPLEX –
LIFTING SOLUTIONS FOR YOUR APPLICATION
For those who do the heavy lifting today, the stakes are high and the challenges complex. We know our
customers put their reputations and physical well-being on the line to get the job done right. We take that
very seriously.

Backed by a global legacy of ultra-reliable quality and superior precision, Enerpac Heavy Lifting Technology
is pushing the industry forward with a wide range of advanced solutions that first and foremost ensure our
customers operate safely and productively every day. It isn’t about being compliant, or “as good” as the next guy;
we outpace the competition by delivering technically superior solutions that are easy to design, safe to use and
built to outlast.

CONSULTATIVE APPROACH TO HEAVY LIFTING

From the very first discussion to gain an understanding of your application to solution design, training and ongoing
field support of your operators, you will find a structured process and a team of application experts who will
advise you towards a successful solution.

SOLUTION DESIGN & TESTING & ON-DEMAND

CONSULTATION MANUFACTURING TRAINING SUPPORT

• Requirements • Design & Engineering • Quality Assurance • On-the-job Application

Specifications Engineer Support
• Manufacturing • Operation &
• Selecting the Excellence Safety Training • Routine Maintenance
Right Solution for & Repair Services
your Application

3
 SOLUTION CONSULTATION

Since the late 1950’s, Enerpac has been steadfast in their commitment to work closely with customers to
understand their lift needs and work site environment. Not all lifts are the same. There are several factors that
must be taken into consideration before recommending the best solution.

APPLICATION CONSIDERATIONS

LOAD CAPACITY LIFT HEIGHT TYPE OF LIFT SPACE

How much weight needs to be How high does the load need Will you lift from above or How much space is
lifted, moved and/or positioned? to be lifted? Are there height below? available to complete
restrictions? the task?

TIME TRANSPORTATION TOTAL COST OF OWNERSHIP

Does the job need to be Will the solution need to be What productivity, labor or training costs need to
completed within a set moved from job to job? be factored into the solution to make it the best
timeframe due to operational long-term investment?
or environmental factors?

Because Enerpac engineers have designed solutions for a variety of applications over the years, they are well-
equipped to minimize risks and to recommend a simpler solution that others may overlook. Built on a world-class
reputation for developing products that meet the most common lifting applications, once your specifications are
in the hands of the Enerpac experts, you are sure to receive a comprehensive recommendation that will save time
and money while ensuring safety above all else.

4
DESIGN AND MANUFACTURING

Enerpac has the most complete offering of standard heavy lifting and positioning tools in the market. These
products are designed to highest standards of performance and offer great flexibility to meet the demands of even
the most challenging applications. Our manufacturing facility adheres to world class production planning and
inventory management to ensure your product arrives at your facility on time as specified.

Design & Engineering Assembly & Quality Assurance Fabrication & Machining
Enerpac engineers are experienced in • All Enerpac products are assembled • A dedicated steel fabrication
the latest software, rapid prototyping, by highly trained individuals, utilizing and certified welding facility
failure analysis methods and guidance from our team of manufacturing manufactures product components
engineering standards. This allows us engineers to work safely and efficiently and support structures for the most
to continuously improve and expand our from start to finish. demanding heavy lifting applications.
product offering to meet ever changing • The Hengelo, NL facility that manufactures • Complete in-house production is
needs of the market. the Enerpac heavy lifting equipment holds delivered using the latest CNC and
several quality certifications. conventional turning machines plus
• CE, Machinery Directive
• ISO 9001: 2015 certified quality
2006/42/E a full range of milling and boring
management system
equipment.
• ASME: B30.1 • ISO 3834-2: 2005 certified welding quality
• ISO 14001: 2015 certified environmental
management system ISO 45001:
2018 certified health and safety
management system
5
 TESTING AND TRAINING

The Enerpac facility that makes and builds your heavy lifting equipment holds several quality system certifications
giving you extra confidence in the safety and reliability of your heavy lifting equipment. Whether your first lift
or move is scheduled upon taking delivery of your new equipment or months later, you will have access to the
dedicated Heavy Lifting team to support your training or troubleshooting needs.

Factory Acceptance Testing (FAT) Documentation Training

Customers are invited to witness FAT, often Upon delivery of your new Heavy Lifting All Enerpac heavy lifting equipment
combined with operator training. Under equipment, an operator’s manual includes one day of training. Additional
witness of Lloyd's Register, all equipment outlines the configuration of your system, training or on-site custom training can
is functionally tested to maximum capacity, how-to-operate detailed instructions also be arranged.
and in many cases up to 125% of rated with safety guidelines and maintenance
load. Additional testing to meet standards recommendations.
compliance, government regulations
or specific customer requirements are
performed and documented at the
same time.

6
ON-DEMAND SUPPORT

Once you take possession of your new heavy lifting equipment, you have on-demand access to our field support
team. And support continues with ongoing maintenance or system upgrades throughout the life of your assets.

On-the-Job Field Support Industry 4.0 Maintenance & Repair

Should you ever require extra Enerpac products incorporate state of the art Downtime is minimized with fast delivery
support while using your Enerpac technology that allows enhanced performance of repair parts and consumables stocked
Heavy Lifting system on the job, our in line with Industry 4.0 standards. at several locations worldwide. For
dedicated application engineers will Data Analysis - Lift data can be downloaded after those that want the added confidence
work closely to guide your operators. completion of work to review and identify trends of specialized technicians, the Enerpac
And to ensure job safety, they will in similar operations. Maintenance & Repair team are ready
travel to your job site as needed to Remote Monitoring - Lift parameters can be to perform your maintenance or repair
ensure your project is completed accessed and reviewed from remote locations. services for you.
timely and without incident. Remote Troubleshooting - When necessary, Enerpac
service engineers can access and troubleshoot
many common problems without having to travel to
job site, saving money and minimizing downtime.

7
 PRECISE POSITIONING OF
STADIUM RETRACTABLE ROOF TRUSSES

8
 YOUR TRUSTED PARTNER IN INFRASTRUCTURE

End Customer:
Texas Rangers® Major League Baseball Team

Project Contractor:
Manhattan Construction and W&W Steel

Location:
Arlington, TX, USA

Enerpac SyncHoist system in use

Project Overview: Live sporting events are fast becoming during roof truss picks.
immersive entertainment experiences. Today’s stadiums are designed
to make a statement – and that creativity stretches all the way to how
the roof opens. The Globe Life Field®, with an extensive retractable
roof, is the new home of the Texas Rangers, the American professional
baseball team. The stadium’s retractable roof when closed provides
relief from the hot summer heat to attract fan attendance.
With larger retractable roofs, trusses are getting longer in length and
much heavier. During stadium construction, enormous trusses can
be assembled on the ground, lifted and put into place with cranes.
However, the capacity and precision needed to place the trusses
cannot be found in just the use of cranes.

Application: Integrate with the 3,000 ton Manitowoc 3100 crawler

crane to extend lifting capacity and precisely lift and position 33
trusses, each weighing between 450 and 750 tons, and averaging over
600 feet in length. The lift and placement must be controlled from the
ground for safety.

Solution: Enerpac SyncHoist 250 ton cylinders with 20 inch stroke,

internal stroke sensor and pressure transducers. Custom Enerpac
ZU4-Series pumps were operated by a wireless control pendant while
stroke and load were monitored via a touchscreen tablet.

Results: By using the Enerpac SyncHoist system, only one crane

was necessary for the roof truss pick plan throughout the project. The
steel contractor was able to wirelessly control each roof truss 200 feet
in air and precisely position it within millimeters.

9
 COMPLEX LIFT OF
1,500 TON FORE RIVER BRIDGE SPAN

10
 YOUR TRUSTED PARTNER IN INFRASTRUCTURE

End Customer:
Skanska Koch | Massachusetts Department of Transportation

Project Contractor:
Barnhart Crane & Rigging (Burkhalter Rigging Inc.)

Location:
Weymouth, MA, USA

Beginning the lifting operations of new

Project Overview: No one would call the temporary bridge bridge from assembly site.
that was constructed in 2002 over the Fore River between Quincy
and Weymouth, Massachusetts a work of art. The bridge replaced a
1936 Art Deco gem when it could no longer safely carry the 32,000
cars that cross the river each weekday. The design and build team
of Skanska Koch was selected by the Massachusetts Department
of Transportation to build the new, permanent Fore River Bridge.
Burkhalter Rigging Inc., of Columbus, Mississippi, was selected to lift
the 1,500 ton bridge span into place. The life expectancy of the new
bridge is 75 years.

Application: Replace the existing temporary bridge built in 2002

with a new $272 million steel vertical lift bridge that will smooth traffic
flow and reduce wait times by opening and closing in half the time (in
good weather) compared to the temporary bridge.

Solution: Although familiar with Enerpac products, Burkhalter Fully lifted bridge ready for transport.
officials asked for help in selecting the best system to do the lift safely
and correctly. An Enerpac Jack-Up system was developed for the
job. The system is a custom-developed multi-point lifting system. The
most common system set-up includes four Jack-Up units but can be
expanded to include more. The four-tower setup has a lifting capacity
of 2,000 tons (500 tons per tower).

Results: The Enerpac Jack-Up system effectively and safely lifted

the bridge span at the assembly site to prepare it for transport. Once
received at the bridge site, the Jack-Up system was used again to
precisely lift the bridge span. Safety must come first especially when
working from barges.

Positioning new bridge span into place.

11
 SKIDDING SYSTEM TAKES THE HEAT OUT OF
A DIFFICULT BOILER MOVE

12
 YOUR TRUSTED PARTNER IN MANUFACTURING

End Customer:
Alderley Park

Project Contractor:
Ritchie Services

Location:
Nether Alderley, Cheshire, UK

Preparing to skid the boiler out of

Project Overview: Alderley Park is a world-class science research the building.
and innovation center set on 400 acres near Manchester, UK. With the
introduction of a new, greener heating system, existing boilers were to
be removed and kept intact for use elsewhere.

Application: To remove two, large, 70 ton boilers from a custom-

built boiler house with a net 6 inch clearance. The removal needed to
be completed without substantial engineering work to the building and
without damage to the boilers. Removing the roof to allow access for
heavy lifting equipment would have meant working at height, cost a
great deal more and taken substantially longer.

Solution: The Enerpac LH400 low-height skidding system.

Compact, it easily fit under the boilers where space was at a
premium. The LH400’s portability and modular construction allowed
easy setup in tight quarters by workers without special equipment.
The transfer was safe, smooth, and fast, allowing over a meter’s travel Boilers skidding in process.
every five minutes.

Results: The Enerpac LH400 low-height skidding system allowed

the boilers to be removed intact, without major impact to the building
or project cost.

The boilers safely outside the

boiler house.

13
 THE UNDECKING OF AN
ELECTRIC ROPE SHOVEL IN A COPPER MINE

14
 YOUR TRUSTED PARTNER IN MINING

Project Contractor:
Elko Wire Rope

Location:
Southwestern USA

The Enerpac JS500 Jack-Up system

Project Overview: Large mining equipment needs routine has a lifting capacity of 2,000 tons.
maintenance for peak performance given the rough environment.
The upper works of the rope shovel needed to be lifted in order to
inspect the bearings and perform related work. The machine weighs
approximately 1,500 tons, requiring lifting with significant force
and control.

Application: Typically, the solution for this kind of lift is using

custom long stroke cylinders or doing a staged lift, which gets the job
done, but not as efficiently. Elko was looking for a more sophisticated,
next level solution to be able to provide better service to their mining
customers for this particular application.

Solution: The Enerpac JS500 Jack-Up system, with a lifting

capacity of 2,000 tons was recommended as the best solution by
providing extensive information on how it would work for this particular
application. After analyzing all the information and talking through The Enerpac JS500 Jack-Up starts
the features, benefits, capabilities, and ease of implementation and lifting operation.
mobilization in the field, Elko chose to invest in a new Enerpac Jack-
Up system to improve their process.

Results: The Enerpac JS500 Jack-Up system is truly an innovative

solution to use for undecking. The automation is smooth, safe and
with the option to add barrels to the system to go as high as you need.
Other products for this application had much lower height limits, but
with this equipment, lifts can go up to 65 feet, much more than was
ever thought to be required for this job. The JS500’s lifting capacities
and versatility will serve the customer well in future projects.

Lifting barrels are stacked together to

mechanically hold the load.

15
 SUPER COMPLEX PLATFORM
MODULE LOAD-OUT

16
 YOUR TRUSTED PARTNER IN OIL & GAS

Location:
Abu Dhabi, UAE

Enerpac Self-Propelled Power Pack

Project Overview: The largest module of an offshore ‘super that powered the ‘Push-Pull’ system
complex’ platform containing an accommodation platform, utilities for the platform load-out.
platform, water disposal platform, separation platform, and riser
platform required weighing and load-out. Enerpac Weighing and
Skidding systems were developed for the 32,000 ton module. Two
further modules weighing 18,000 and 20,000 tons also used the
Enerpac system.

Application: As each platform module is completed, its weight

and Center of Gravity (CoG) must be determined. In addition, the
modules must be loaded-out from the construction site to barges
for transport offshore. Traditionally, an array of load cells is used to
weigh the platform module, however, the module size meant another
approach was needed. For the load-out, the operator was looking for a
contingency plan in the event the load-out operation had to be aborted
and the module retrieved back to shore.
Enerpac ‘Push-Pull’ system for the
Solution: An Enerpac multifunctional synchronous lifting EVO platform module load-out.
system operating 96 cylinders was used to weigh the platforms. It
provided an accuracy of lifting synchronization such that the difference
in plunger stroke of each cylinder was less than 1mm. For the load-
out, Enerpac developed a Push-Pull Gripper Jack system that gripped
the load-out track. It formed a moving anchor, enabling both forward
and reverse movement should the module need to be recovered to
shore.

Results: The EVO system allowed an unprecedented level of

weighing accuracy for this type of project. The load-out of all three
modules was achieved successfully.

Effective control of the EVO system’s

network of 96 cylinders.

17
 THE SAFE LOAD-OUT OF
OFFSHORE WIND TURBINE FOUNDATIONS

18
 YOUR TRUSTED PARTNER IN POWER GENERATION

End Customer:
EnBW Hohe See and Albatros Wind Farms

Project Contractor:
GeoSea Geotechnical & Offshore Solutions

Location:
North Sea Port, Off the Coast of Germany

Trolley system with clamping frame.

Project Overview: GeoSea was looking for a way to minimize the
time in Port during load-out of offshore wind turbine foundations on
board their installation vessels.

Application: Enerpac supplied GeoSea Geotechnical & Offshore

Solutions with an integrated trolley system for loading transition
pieces onto a jack-up vessel for the foundation installation of the
Hohe See and Albatros wind farms, offshore Germany.

Solution: The Enerpac trolley system was mounted on two 295 feet
steel tracks running across the deck of the jack-up installation vessel.
Three 500 ton transition pieces were securely fastened by hydraulic
cylinders in the frames. Each clamping frame was powered by four
electrically-driven trolleys allowing higher speeds than traditional
skidding systems. An integrated hydraulic clamping and levelling
system was also included as part of the overall solution. The trolley
system is controlled by a single Intellilift wireless control unit allowing Loading of transition segments.
fully integrated, synchronized operation.

During load-out, the transition pieces were positioned in the clamping

frames and moved along the track. As monopiles were installed, the
transition pieces were advanced along the track to bring them within
reach of the on-board crane.

Results: Rapid loading of transition pieces using the Enerpac

Trolley System ensured a quick turnaround in port.

Enerpac Trolley System in use.

19
 PRECISE POSITIONING OF
HIGH-PRESSURE POWER PLANT HEATERS

20
 YOUR TRUSTED PARTNER IN POWER GENERATION

End Customer:
Safi Energy Company

Project Contractor:
Marine Maroc

Location:
Safi, Morocco

The Enerpac SL400 Gantry lifts the

Project Overview: The Safi power plant is the first coal- 138-ton high-pressure heater.
fired project in Africa to use ultra-supercritical technology offering
10% higher efficiency compared to conventional plants, enabling
significant CO2 reductions and lower fuel costs. With a capacity of
1,386 MW, the Safi power plant is part of Morocco’s national strategic
plan to meet its growing electricity demand at the lowest possible
cost while respecting the environment.

Application: Lift the 138-ton heaters from the hydraulic modular

trailers and place in a storage area ready for installation.

Solution: Marine Maroc transported the high-pressure heaters from

Safi port to the power plant on multi-wheel hydraulic modular trailers.
On arrival at the plant, an Enerpac SL400 Telescopic Hydraulic Gantry
was deployed to lift the heaters. The gantry’s powered side shift
units enabled the heaters to be accurately positioned on a temporary
support base. Delivering the high-pressure heater.
Results: The Enerpac SL400 Gantry provided a simpler lifting
solution that was quicker to mobilize and demobilize than a crane.

Lifting the high-pressure heater off the

transport trailer.

21
 STANDARD PRODUCTS

Hydraulic Gantries Strand Jacks Jack-Up Systems

Telescopic Gantries Hydraulic Gantries Strand jacks are used all over the world The Jack-Up system is a custom
are a safe, efficient way to lift and to erect bridges, load out off shore developed multi-point lifting system
position heavy loads in applications structures, and lift/ lower heavy loads used to incrementally lift heavy loads
where traditional cranes will not fit and where the use of conventional cranes is and mechanically hold them in place.
permanent overhead structures for job neither economical nor practical.
cranes are not an option.

Synchronous Hoist Systems Skidding Systems Self-Propelled Modular

SyncHoist is a unique crane product for Comprised of a series of skid shoes Transporter (SPMT)
below-the-hook positioning of heavy powered by hydraulic push-pull Features a minimized height and slim
loads that require precision placement. cylinders, travelling over a pre- design, which makes it very easy to
The SyncHoist system may reduce the constructed track. Skid systems are operate in confined spaces.
number of cranes needed and reduce the ideal solutions for moving heavy
the costs of multiple picks. loads horizontally.

Synchronous Lifting Systems Trolley Systems Turntables

Used to control and synchronize the Electrically-driven with wireless For safe and controlled rotation of heavy
movements of multiple lifting points to controls which can carry heavy loads loads. Turntables are your solution for
achieve high-precision movement of along a fixed track system. rotating heavy loads during, before or
heavy objects. Trolley Systems provide an alternative after a lifting and skidding operation.
method to traditional skidding
system and provide continuous fast
movement over long distances.

22
 CUSTOM SOLUTIONS

Vertical Cask Transporter Customized Bridge Building Systems

The Enerpac vertical cask transporter combines the lifting Enerpac has over 30 years of experience providing solutions for the
capability of a hydraulic gantry with the flexibility of a self-propelled most complex and demanding bridge construction applications.
modular transporter (SPMT). Each system is built to meet the
customer’s specifications. In this application, it provides efficient
handling of nuclear casks at spent fuel storage facilities.

Strand Jack Gantry Synchronized Hoisting

The strand jack gantry is a steel structure to facilitate lifting and Synchoist cylinders can be combined with on board power unit and
skidding back, forth and sideways with heavy loads. The Enerpac lifting frame for customized applications requiring the manipulation
strand jack gantry allows operation in confined spaces. of loads suspended from cranes.

Rotor Removal System Jack-Up System

The generator rotor removal and installation system is a custom Jack-Up systems can be outfitted with a variety of accessories to
developed product for removing and installing the rotor (field) in increase capabilities. In this application a standard Jack-Up system
a power plant’s generator. The system is designed to comply with was configured with header beams and strand jack system and
the varying dimensions and challenging accessibility of a plant’s then placed on electric trolleys to allow overhead lifting as well as
generator. Enerpac has designed several configurable solutions sideshifting and traveling.
which utilize hydraulics to push, pull and position the rotor at
multiple height requirements.
23
WORLD CLASS SUPPORT
RESULTS IN THE RIGHT TOOL
Whether you’re looking for help identifying the right product, receive technical support, training or request product materials,
we have experts ready to answer your questions and provide guidance on the tool or accessory that will help get your toughest
job done. Reach out to us at Enerpac.com/support.

enerpac.com/heavy

655_030109810_EN-US ©2021 ENERPAC. All rights reserved.