CBSE Class 11 physics

Important Questions
Chapter 4
Motion in A Plane

1 Marks Questions

1.What is “Trajectory of a projectile?

Ans:The path followed by a projectile is called trajectory of projectile e.g. parabola.

2.A projectile is fired at an angle of 30o with the horizontal with velocity 10m/s. At what
angle with the vertical should it be fired to get maximum range?

Ans:Maximum range is obtained at an angle of 45o.

3. What is the value of angular speed for 1 revolution?

Ans:For one complete revolution, in time period t = T ,

4. Give an example of a body moving with uniform speed but having a variable velocity
and an acceleration which remains constant in magnitude but changes in direction

Ans:A body moving in a circular path.

5.What is the direction of centripetal force when particle is following a circular path?

Ans:The direction of the centripetal force is towards the centre of the circle.

6.Two vectors are perpendicular to each other. What is the value of ?

Ans: Since

1
7.What will be the effect on horizontal range of a projectile when its initial velocity is
doubled, keeping the angle of projection same?

Ans:Four times the initial horizontal range.

8.What will be the effect on maximum height of a projectile when its angle of projection

is changed from 30o to 60o, keeping the same initial velocity of projection?

Ans:Three times the initial vertical height.

9.What is the angular velocity of the hour hand of a clock?

Ans: radian per hour.

10.A body is moving on a curved path with a constant speed. What is the nature of its
acceleration?

Ans:Acceleration must be perpendicular to the direction of motion and is called centripetal

acceleration.

11. State, for each of the following physical quantities, if it is a scalar or a vector:

volume, mass, speed, acceleration, density, number of moles, velocity, angular

frequency, displacement, angular velocity.

Ans. Scalar: Volume, mass, speed, density, number of moles, angular frequency

Vector: Acceleration, velocity, displacement, angular velocity

A scalar quantity is specified by its magnitude only. It does not have any direction associated
with it. Volume, mass, speed, density, number of moles, and angular frequency are some of
the scalar physical quantities.

2
A vector quantity is specified by its magnitude as well as the direction associated with it.
Acceleration, velocity, displacement, and angular velocity belong to this category.

12. Pick out the two scalar quantities in the following list:

force, angular momentum, work, current, linear momentum, electric field, average
velocity, magnetic moment, relative velocity.

Ans. Work and current are scalar quantities.

Work done is given by the dot product of force and displacement. Since the dot product of
two quantities is always a scalar, work is a scalar physical quantity.

Current is described only by its magnitude. Its direction is not taken into account. Hence, it is
a scalar quantity.

13. Pick out the only vector quantity in the following list:

Temperature, pressure, impulse, time, power, total path length, energy, gravitational
potential, coefficient of friction, charge.

Ans. Impulse

Impulse is given by the product of force and time. Since force is a vector quantity, its product
with time (a scalar quantity) gives a vector quantity.

3
 CBSE Class 11 physics
Important Questions
Chapter 4
Motion in A Plane

2 Marks Questions

1.What is the angle between two forces of 2N and 3N having resultant as 4N?

Ans:Using we get

2.What is the angle of projection at which horizontal range and maximum height are
equal?

Ans: Equating,

4
3.Prove that for elevations which exceed or fall short of 45o by equal amounts the
ranges are equal?

Ans:We know

So,

R1 = R2

4.At what range will a radar set show a fighter plane flying at 3 km above its centre and
at distance of 4 km from it?

Ans: Here straight distance of the object form the radar = OB

5
5.Two forces 5 and 10 kg wt are acting with an inclination of 120o between them. What
is the angle which the resultant makes with 10kg wt?

Ans:

6
6.A stone is thrown vertically upwards and then it returns to the thrower. Is it a
projectile? Explain?

Ans:A stone cannot be considered as a projectile because a projectile must have two
perpendicular components of velocities but in this case a stone has velocity in one direction
while going up or coming downwards.

7.Which is greater the angular velocity of the hour hand of a watch or angular velocity
of earth around its own axis?

Ans:In hour hand of a watch (T) =1 2h

For rotation of earth T = 24h

8.Why does the direction of motion of a projectile become horizontal at the highest
point of its trajectory?

Ans:At the highest point vertical component of velocity becomes zero thus direction of
motion of projectile becomes horizontal.

9.A vector has magnitude 2 and another vector have magnitude 3 and is
perpendicular to each other. By vector diagram find the magnitude of and

7
show its direction in the diagram.

Ans: Here

10.Find a unit vector parallel to the resultant of the vectors

Ans: We know

8
11.A stone tied at the end of string is whirled in a circle. If the string breaks, the stone
flies away tangentially. Why?

Ans:When a stone is moving around a circular path, its velocity acts tangent to the circle.
When the string breaks, the centripetal force will not act. Due to inertia, the stone continues
to move along the tangent to circular path, and flies off tangentially to the circular path.

12. What are the two angles of projection of a projectile projected with velocity 30m/s,

so that the horizontal range is 45m. Take, g = 10m/s2.

Ans:

13.The blades of an aeroplane propeller are rotating at the rate of 600 revolutions per
minute. Calculate its angular velocity.

Ans:

9
14.What is a uniform circular motion? Explain the terms time period, frequency and
angular velocity. Establish relation between them.

Ans:When an object moves in a circular path with constant speed then the motion is called
uniform circular motion

Time period – The time taken by the object to complete one revolution

Frequency – The total number of revolutions in one second is called the frequency.

Angular velocity – It is defined as the time rate of change of angular displacement.

15.A body of mass m is thrown with velocity at angle of 30o to the horizontal and

another body B of the same mass is thrown with velocity at an angle of 60o to the
horizontal. Find the ratio of the horizontal range and maximum height of A and B?

Ans:(1) When

When

10
(2) When

When

16. Read each statement below carefully and state with reasons, if it is true or false:

(a) The magnitude of a vector is always a scalar, (b) each component of a vector is
always a scalar, (c) the total path length is always equal to the magnitude of the
displacement vector of a particle. (d) the average speed of a particle (defined as total
path length divided by the time taken to cover the path) is either greater or equal to the
magnitude of average velocity of the particle over the same interval of time, (e) Three
vectors not lying in a plane can never add up to give a null vector.

Ans.

(a) True

(b) False

(c) False

(d) True

11
(e) True

Explanation:

(a) The magnitude of a vector is a number. Hence, it is a scalar.

(b) Each component of a vector is also a vector.

(c) Total path length is a scalar quantity, whereas displacement is a vector quantity. Hence,
the total path length is always greater than the magnitude of displacement. It becomes equal
to the magnitude of displacement only when a particle is moving in a straight line.

(d) It is because of the fact that the total path length is always greater than or equal to the
magnitude of displacement of a particle.

(e) Three vectors, which do not lie in a plane, cannot be represented by the sides of a triangle
taken in the same order.

17. State with reasons, whether the following algebraic operations with scalar and
vector physical quantities are meaningful:

(a) adding any two scalars, (b) adding a scalar to a vector of the same dimensions, (c)
multiplying any vector by any scalar, (d) multiplying any two scalars, (e) adding any
two vectors, (f) adding a component of a vector to the same vector.

Ans. (a) Meaningful

(b) Not Meaningful

(c) Meaningful

(d) Meaningful

(e) Meaningful

(f) Meaningful

Explanation:

12
(a)The addition of two scalar quantities is meaningful only if they both represent the same
physical quantity.

(b)The addition of a vector quantity with a scalar quantity is not meaningful.

(c) A scalar can be multiplied with a vector. For example, force is multiplied with time to
give impulse.

(d) A scalar, irrespective of the physical quantity it represents, can be multiplied with
another scalar having the same or different dimensions.

(e) The addition of two vector quantities is meaningful only if they both represent the same
physical quantity.

(f) A component of a vector can be added to the same vector as they both have the same
dimensions.

18. Three girls skating on a circular ice ground of radius 200 m start from a point Pon
the edge of the ground and reach a point Q diametrically opposite to P following
different paths as shown in Fig. 4.20. What is the magnitude of the displacement vector
for each? For which girl is this equal to the actual length of the path skated?

Ans.

Displacement is given by the minimum distance between the initial and final positions of a
particle. In the given case, all the girls start from point P and reach point Q. The magnitudes
of their displacements will be equal to the diameter of the ground.

Radius of the ground = 200 m

13
Diameter of the ground = = 400 m

Hence, the magnitude of the displacement for each girl is 400 m. This is equal to the actual
length of the path skated by girl B.

19. A man can swim with a speed of 4.0 km/h in still water. How long does he take to
cross a river 1.0 km wide if the river flows steadily at 3.0 km/h and he makes his strokes
normal to the river current? How far down the river does he go when he reaches the
other bank?

Ans. Speed of the man, = 4 km/h

Width of the river = 1 km

Time taken to cross the river

Speed of the river, = 3 km/h

Distance covered with flow of the river =

20. A stone tied to the end of a string 80 cm long is whirled in a horizontal circle with a
constant speed. If the stone makes 14 revolutions in 25 s, what is the magnitude and
direction of acceleration of the stone?

Ans. Length of the string, l = 80 cm = 0.8 m

Number of revolutions = 14

14
Time taken = 25 s

Frequency,

Angular frequency,

Centripetal acceleration,

The direction of centripetal acceleration is always directed along the string, toward the
centre, at all points.

21. An aircraft executes a horizontal loop of radius 1.00 km with a steady speed of 900
km/h. Compare its centripetal acceleration with the acceleration due to gravity.

Ans.

Radius of the loop, r= 1 km = 1000 m

Speed of the aircraft, v= 900 km/h

Centripetal acceleration,

Acceleration due to gravity, g =

15
22. Read each statement below carefully and state, with reasons, if it is true or false:

(a) The net acceleration of a particle in circular motion is always along the radius of
the circle towards the centre

(b) The velocity vector of a particle at a point is always along the tangent to the path of
the particle at that point

(c) The acceleration vector of a particle in uniform circular motion averaged over one
cycle is a null vector

Ans.

(a) False

The net acceleration of a particle in circular motion is not always directed along the radius of
the circle toward the centre. It happens only in the case of uniform circular motion.

(b) True

At a point on a circular path, a particle appears to move tangentially to the circular path.
Hence, the velocity vector of the particle is always along the tangent at a point.

(c) True

In uniform circular motion (UCM), the direction of the acceleration vector points toward the
centre of the circle. However, it constantly changes with time. The average of these vectors
over one cycle is a null vector.

23. A cricketer can throw a ball to a maximum horizontal distance of 100 m. How much
high above the ground can the cricketer throw the same ball?

Ans.

16
Maximum horizontal distance, R = 100 m

The cricketer will only be able to throw the ball to the maximum horizontal distance when
the angle of projection is 45°, i.e., θ= 45°.

The horizontal range for a projection velocity v, is given by the relation:

The ball will achieve the maximum height when it is thrown vertically upward. For such
motion, the final velocity v is zero at the maximum height H.

Acceleration, a = Using the third equation of motion:

24. The position of a particle is given by

Where t is in seconds and the coefficients have the proper units for r to be in metres.

(a) Find the v and a of the particle?

(b) What is the magnitude and direction of velocity of the particle at t = 2.0 s?

Ans.

17
(a)

The position of the particle is given by:

Velocity , of the particle is given as:

Acceleration , of the particle is given as:

(b) 8.54 m/s, 69.45°below the x-axis

We have velocity sector,

At

The magnitude of velocity is given by:

18
The negative sign indicates that the direction of velocity is below the x-axis.

25: For any arbitrary motion in space, which of the following relations are true:

(a)

(b)

(c)

(d)

(e)

(The ‘average’ stands for average of the quantity over the time interval t1to t2)

Ans. (b)and (e)

(a)It is given that the motion of the particle is arbitrary. Therefore, the average velocity of
the particle cannot be given by this equation.

(b)The arbitrary motion of the particle can be represented by this equation.

(c)The motion of the particle is arbitrary. The acceleration of the particle may also be non-
uniform. Hence, this equation cannot represent the motion of the particle in space.

(d)The motion of the particle is arbitrary; acceleration of the particle may also be non-
uniform. Hence, this equation cannot represent the motion of particle in space.

19
(e)The arbitrary motion of the particle can be represented by this equation.

26. Read each statement below carefully and state, with reasons and examples, if it is
true or false:

A scalar quantity is one that

(a) is conserved in a process
(b) can never take negative values
c) must be dimensionless
(d) does not vary from one point to another in space
(e) has the same value for observers with different orientations of axes

Ans.(a) False
Despite being a scalar quantity, energy is not conserved in inelastic collisions.

(b) False
Despite being a scalar quantity, temperature can take negative values.

(c) False
Total path length is a scalar quantity. Yet it has the dimension of length.

(d) False
A scalar quantity such as gravitational potential can vary from one point to another in space.

(e) True
The value of a scalar does not vary for observers with different orientations of axes.

27. (a) A vector has magnitude and direction. Does it have a location in space? (b) Can it
vary with time? (c) Will two equal vectors a and b at different locations in space
necessarily have identical physical effects? Give examples in support of your answer.

Ans.(a) No; (b) Yes; (c) No

Generally speaking, a vector has no definite locations in space. This is because a vector
remains invariant when displaced in such a way that its magnitude and direction remain the
same. However, a position vector has a definite location in space.

20
A vector can vary with time. For example, the displacement vector of a particle moving with
a certain velocity varies with time.

Two equal vectors located at different locations in space need not produce the same physical
effect. For example, two equal forces acting on an object at different points can cause the
body to rotate, but their combination cannot produce an equal turning effect.

28. (a) A vector has both magnitude and direction. Does it mean that anything that has
magnitude and direction is necessarily a vector? (b) The rotation of a body can be
specified by the direction of the axis of rotation, and the angle of rotation about the
axis. Does that make any rotation a vector?

Ans.(a) No; (b) No

A physical quantity having both magnitude and direction need not be considered a vector.
For example, despite having magnitude and direction, current is a scalar quantity. The
essential requirement for a physical quantity to be considered a vector is that it should
follow the law of vector addition.
Generally speaking, the rotation of a body about an axis is not a vector quantity as it does not
follow the law of vector addition. However, a rotation by a certain small angle follows the
law of vector addition and is therefore considered a vector.

29. Can you associate vectors with (a) the length of a wire bent into a loop, (b) a plane
area, (c) a sphere? Explain.
Ans. (a) No; (b) Yes; (c) No
(a) One cannot associate a vector with the length of a wire bent into a loop.
(b) One can associate an area vector with a plane area. The direction of this vector is normal,
inward or outward to the plane area.
(c) One cannot associate a vector with the volume of a sphere. However, an area vector can
be associated with the area of a sphere.

21
 CBSE Class 11 physics
Important Questions
Chapter 4
Motion in A Plane

3 Marks Questions

1.Derive expressions for velocity and acceleration for uniform circular motion.

OR Derive expression for linear acceleration in uniform circular motion.

Ans: (1) IF

And angular velocity

Using

Substituting in (1)

(2) Since

22
2.Derive an equation for the path of a projectile fired parallel to horizontal.

Ans:Let a projectile having initial uniform horizontal velocity u be under the influence of
gravity, then at any instant t at position P the horizontal and vertical.

For horizontal motion

For vertical motion

We get

23
Or

Using equation (1) and (2)

3.(a) Define time of flight and horizontal range?

(b) From a certain height above the ground a stone A is dropped gently. Simultaneously
another stone B is fired horizontally. Which of the two stones will arrive on the ground
earlier?

Ans: (a) Time of flight – The time taken by the projectile to complete its trajectory is called
time of flight.

Horizontal Range – The maximum horizontal distance covered by the projectile form the
foot of the tower to the point where projectile hits the ground is called horizontal range.

(b) Both the stones will reach the ground simultaneously because the initial vertical velocity
in both cases is zero and both are falling with same acceleration equal to acceleration due to
gravity.

4.At what point of projectile motion (i) potential energy maximum (ii) Kinetic energy
maximum (iii) total mechanical energy is maximum

Ans:(1) P.E. Will be maximum at the highest point

(P.E.) highest point = mgH

(2)K.E will be minimum at the highest point

24
(Vertical component of velocity is zero)

(3)Total mechanical energy

5. A cyclist starts from the centre O of a circular park of radius 1 km, reaches the edge
Pof the park, then cycles along the circumference, and returns to the centre along QO
as shown in Fig. 4.21. If the round trip takes 10 min, what is the (a) net displacement, (b)
average velocity, and (c) average speed of the cyclist?

Ans. (a) Displacement is given by the minimum distance between the initial and final
positions of a body. In the given case, the cyclist comes to the starting point after cycling for
10 minutes. Hence, his net displacement is zero.

25
(b) Average velocity is given by the relation:

Average velocity

Since the net displacement of the cyclist is zero, his average velocity will also be zero.

(c) Average speed of the cyclist is given by the relation:

Average speed

Total path length = OP + PQ + QO

Time taken = 10 min

∴Average speed

6. A passenger arriving in a new town wishes to go from the station to a hotel located 10
km away on a straight road from the station. A dishonest cabman takes him along a
circuitous path 23 km long and reaches the hotel in 28 min. What is (a) the average
speed of the taxi, (b) the magnitude of average velocity? Are the two equal?

Ans. (a) Total distance travelled = 23 km

26
Total time taken = 28 min

∴Average speed of the taxi

(b) Distance between the hotel and the station = 10 km = Displacement of the car

∴Average velocity

Therefore, the two physical quantities (average speed and average velocity) are not equal.

7. Rain is falling vertically with a speed of . A woman rides a bicycle with a

speed of 10 in the north to south direction. What is the direction in which she
should hold her umbrella?

Ans. The described situation is shown in the given figure.

Here,

= Velocity of the cyclist

27
 = Velocity of falling rain

In order to protect herself from the rain, the woman must hold her umbrella in the direction
of the relative velocity (v) of the rain with respect to the woman.

Hence, the woman must hold the umbrella toward the south, at an angle of nearly 18° with
the vertical.

8. The ceiling of a long hall is 25 m high. What is the maximum horizontal distance that
a ball thrown with a speed of can go without hitting the ceiling of the hall?

Ans. Speed of the ball, u = 40 m/s

Maximum height, h = 25 m

In projectile motion, the maximum height reached by a body projected at an angle θ, is given
by the relation:

= 0.30625

sin θ = 0.5534

∴θ = (0.5534) = 33.60°

28
Horizontal range, R

9. An aircraft is flying at a height of 3400 m above the ground. If the angle subtended at
a ground observation point by the aircraft positions 10.0 s apart is 30°, what is the speed
of the aircraft?

Ans. The positions of the observer and the aircraft are shown in the given figure.

Height of the aircraft from ground, OR = 3400 m

Angle subtended between the positions, ∠POQ = 30
Time = 10 s
In ΔPRO:

ΔPRO is similar to ΔRQO.

∴PR = RQ
PQ = PR + RQ

29
= 2PR = 2 × 3400 tan 15°
= 6800 × 0.268 = 1822.4 m

∴Speed of the aircraft

10. A bullet fired at an angle of 30° with the horizontal hits the ground 3.0 km away. By
adjusting its angle of projection, can one hope to hit a target 5.0 km away? Assume the
muzzle speed to the fixed, and neglect air resistance.

Ans. No
Range, R = 3 km
Angle of projection, = 30°
Acceleration due to gravity, g =
Horizontal range for the projection velocity , is given by the relation:

The maximum range ( is achieved by the bullet when it is fired at an angle of 45°with

the horizontal, that is,

On comparing equations (1) and (2), we get:

Hence, the bullet will not hit a target 5 km away.

30
 CBSE Class 11 physics
Important Questions
Chapter 4
Motion in A Plane

4 Marks Questions

1. Given a + b + c + d = 0, which of the following statements are correct:

(a) a, b, c, and d must each be a null vector,

(b) The magnitude of (a + c) equals the magnitude of (b+ d),

(c) The magnitude of a can never be greater than the sum of the magnitudes of b, c, and
d,

(d) b + c must lie in the plane of a and d if a and d are not collinear, and in the line

Ans. (a) Incorrect

In order to make a + b + c + d = 0, it is not necessary to have all the four given vectors to be
null vectors. There are many other combinations which can give the sum zero.

(b) Correct
a+b+c+d=0

a + c = -(b + d)

Taking modulus on both the sides, we get:

Hence, the magnitude of (a + c) is the same as the magnitude of (b + d).

(c) Correct
a+b+c+d=0
a = (b + c + d)
Taking modulus both sides, we get:

31
|a|=|b+c+d|
… (i)

Equation (i) shows that the magnitude of a is equal to or less than the sum of the magnitudes
of b, c, and d.
Hence, the magnitude of vector a can never be greater than the sum of the magnitudes of b,
c, and d.

(d) Correct
For a + b + c + d = 0
a + (b + c) + d = 0
The resultant sum of the three vectors a, (b + c), and d can be zero only if (b + c) lie in a plane
containing a and d, assuming that these three vectors are represented by the three sides of a
triangle.
If a and d are collinear, then it implies that the vector (b + c) is in the line of a and d. This
implication holds only then the vector sum of all the vectors will be zero.

2. In a harbour, wind is blowing at the speed of 72 km/h and the flag on the mast of a
boat anchored in the harbour flutters along the N-E direction. If the boat starts moving
at a speed of 51 km/h to the north, what is the direction of the flag on the mast of the
boat?

Ans. Velocity of the boat, = 51 km/h

Velocity of the wind, = 72 km/h

The flag is fluttering in the north-east direction. It shows that the wind is blowing toward the
north-east direction. When the ship begins sailing toward the north, the flag will move along
the direction of the relative velocity ( ) of the wind with respect to the boat.

The angle between = 90° + 45°

32
Angle with respect to the east direction = = 0.11°
Hence, the flag will flutter almost due east.

3. A fighter plane flying horizontally at an altitude of 1.5 km with speed 720 km/h passes
directly overhead an anti-aircraft gun. At what angle from the vertical should the gun
be fired for the shell with muzzle speed to hit the plane? At what minimum
altitude should the pilot fly the plane to avoid being hit? (Take g = ).

Ans. Height of the fighter plane = 1.5 km = 1500 m

Speed of the fighter plane, v = 720 km/h = 200 m/s
Let θ be the angle with the vertical so that the shell hits the plane. The situation is shown in
the given figure.

Muzzle velocity of the gun, u = 600 m/s

Time taken by the shell to hit the plane = t
Horizontal distance travelled by the shell =
Distance travelled by the plane = vt

33
The shell hits the plane. Hence, these two distances must be equal.
= vt

In order to avoid being hit by the shell, the pilot must fly the plane at an altitude (H) higher
than the maximum height achieved by the shell.

34
 CBSE Class 11 physics
Important Questions
Chapter 4
Motion in A Plane

5 Marks Questions

1.(a) What is the angle between if denote the adjacent sides of a

parallelogram drawn form a point and the area of the parallelogram is ?

(b) State and prove triangular law of vector addition?

Ans:(a) Area of a parallelogram =

Area of parallelogram = A B Sin θ ( Applying cross product)

Given, area of parallelogram =

So,

35
(b) Triangular law of vector addition states that if two vectors can be represented both in
magnitude and direction by the sides of a triangle taken in order then their resultant is given
by the third side of the triangle taken in opposite order.

Proof à in ADC

2. Establish the following vector inequalities geometrically or otherwise:

(a)

36
(b)

(c)

(d)

When does the equality sign above apply?

Ans.(a) Let two vectors and be represented by the adjacent sides of a parallelogram

OMNP, as shown in the given figure.

Here, we can write:

In a triangle, each side is smaller than the sum of the other two sides.

Therefore, in ΔOMN, we have:

ON < (OM + MN)

If the two vectors and act along a straight line in the same direction, then we can write:

37
Combining equations (iv) and (v), we get:

(b) Let two vectors and be represented by the adjacent sides of a parallelogram OMNP,
as shown in the given figure.

Here, we have:

In a triangle, each side is smaller than the sum of the other two sides.

Therefore, in ΔOMN, we have:

… (iv)

If the two vectors nd act along a straight line in the same direction, then we can write:

38
 … (v)

Combining equations (iv) and (v), we get:

(c) Let two vectors and be represented by the adjacent sides of a parallelogram PORS, as
shown in the given figure.

Here we have:

In a triangle, each side is smaller than the sum of the other two sides. Therefore, in we
have:

OS<OP+PS

If the two vectors act in a straight line but in opposite directions, then we can write:

Combining equations (iii) and (iv) we get:

39
(d) Let two vectors and be represented by the adjacent sides of a parallelogram PORS,
as shown in the given figure.

The following relations can be written for the given parallelogram.

The quantity on the LHS is always positive and that on the RHS can be positive or negative.
To make both quantities positive, we take modulus on both sides as:

If the two vectors act in a straight line but in the opposite directions, then we can write:

Combining equations (iv) and (v), we get:

40
3. On an open ground, a motorist follows a track that turns to his left by an angle of 60°
after every 500 m. Starting from a given turn, specify the displacement of the motorist
at the third, sixth and eighth turn. Compare the magnitude of the displacement with
the total path length covered by the motorist in each case.

Ans.

The path followed by the motorist is a regular hexagon with side 500 m, as shown in the
given figure

Let the motorist start from point P.

The motorist takes the third turn at S.

∴Magnitude of displacement = PS = PV + VS = 500 + 500 = 1000 m

Total path length = PQ + QR + RS = 500 + 500 +500 = 1500 m

The motorist takes the sixth turn at point P, which is the starting point.

∴Magnitude of displacement = 0

Total path length = PQ + QR + RS + ST + TU + UP

= 500 + 500 + 500 + 500 + 500 + 500 = 3000 m

The motorist takes the eight turn at point R

∴Magnitude of displacement = PR

41
Therefore, the magnitude of displacement is 866.03 m at an angle of 30° with PR.

Total path length = Circumference of the hexagon + PQ + QR

= 6 × 500 + 500 + 500 = 4000 m

The magnitude of displacement and the total path length corresponding to the required turns
is shown in the given table

Turn Magnitude of displacement (m) Total path length (m)

Third 1000 1500
Sixth 0 3000
Eighth 866.03; 30° 4000

4. A particle starts from the origin at t = 0 s with a velocity of and moves in

the x-y plane with a constant acceleration of .

(a) At what time is the x-coordinate of the particle 16 m? What is the y-coordinate of the
particle at that time?

(b) What is the speed of the particle at the time?

Ans.

Velocity of the particle,

42
Acceleration of the particle

Also,

But,

Integrating both sides:

Where,

= Velocity vector of the particle at t = 0

= Velocity vector of the particle at time t

But,

Integrating the equations with the conditions: at t = 0; r = 0 and at t = t; r = r

Since the motion of the particle is confined to the x-y plane, on equating the coefficients of

43
 , we get:

(a) When x = 16 m:

∴y = 10 × 2 + = 24 m

(b) Velocity of the particle is given by:

44
5. are unit vectors along x- and y-axis respectively. What is the magnitude and

direction of the vectors , and ? What are the components of a vector

along the directions of and ? [You may use graphical method]

Ans.

Consider a vector , given as:

On comparing the components on both sides, we get:

Hence, the magnitude of the vector is .

Let be the angle made by the vector , with the x-axis, as shown in the following figure.

45
Hence, the vector makes an angle of with the x-axis.

Hence, the magnitude of the vector is .

Let be the angle made by the vector , with the x- axis, as shown in the following figure.

Hence, the vector makes an angle of

It is given that:

46
On comparing the coefficients of , we have:

Let make an angle with the x-axis , as shown in the following figure.

Angle between the vectors

Component of vector , along the direction of , making an angle

47
Let be the angle between the vectors and .

Component of vector , along the direction of , making an angle

48
6. A cyclist is riding with a speed of 27 km/h. As he approaches a circular turn on the
road of radius 80 m, he applies brakes and reduces his speed at the constant rate of 0.50
m/s every second. What is the magnitude and direction of the net acceleration of the
cyclist on the circular turn?

Ans.​​ 0.86 m/s2; 54.46° with the direction of velocity

Speed of the cyclist,

Radius of the circular turn, r = 80 m

Centripetal acceleration is given as:

The situation is shown in the given figure:

Suppose the cyclist begins cycling from point P and moves toward point Q. At point Q, he
applies the breaks and decelerates the speed of the bicycle by .

49
This acceleration is along the tangent at Q and opposite to the direction of motion of the
cyclist.
Since the angle between is 90°, the resultant acceleration a is given by:

Where is the angle of the resultant with the direction of velocity

7. (a) Show that for a projectile the angle between the velocity and the x-axis as a
function of time is given by

(b) Show that the projection angle for a projectile launched from the origin is given
by

Where the symbols have their usual meaning.

Ans. (a) Let and respectively be the initial components of the velocity of the
projectile along horizontal (x) and vertical (y) directions.
Let and respectively be the horizontal and vertical components of velocity at a point

P.

50
Time taken by the projectile to reach point P = t
Applying the first equation of motion along the vertical and horizontal directions, we get:

(b) Maximum vertical height,

Horizontal range,

Solving equations (i) and (ii), we get:

51