USB HD Dashcam with

its own Android car machine APK

User's Manual

1. Product Profile
This USB car dashcam, which has its own android apk
file, is designed for Android large-screen car audio system,
through the USB interface transmission of high-definition
screen browsing, video file playback, safe driving
assistance and other functions. This product uses imported
image processing chip, with high quality photosensitive
1
chip, to bring you the ultimate high-definition video
experience.
2. Parameter Configuration
● image processor:
- -Single-way Ankai / Lingtong
- -Shuanglu Ankai / Lingtong
● Lens: super large wide Angle, F2.0 super large aperture
● Storage: TF card (32G max)
● Power: USB power supply (DC_5V / 500 mA)
3. Featured Functions
● Bring a car machine APK, the installation is more
convenient
● Starlight night vision, dark night vision, night vision video
screen as clear (some models have this function)
● Front and rear double record, the car front and car
behind the car at the same time (some models have this
function)
● 360-degree panorama, panoramic rotation inside and
outside the car (some models have this function)
● Orbit offset warning, collision warning ADAS
● Automatic function: power on automatic recording,
automatic cycle coverage recording
● Start-up automatic synchronization of vehicle time
2
4. Installation Diagram
Supporting Android large screen host installation
connection diagram:

Note: Usually select any USB interface of the large screen host for
connection, such as USB1 in the above figure. If the device cannot be
found normally, then switch to the USB2 interface.

5、 Hardware Installation Method

First of all, find a small area inside the front glass of the car in the middle of the
rearview mirror base (no shelter and light coating), then use clean cloth to wipe it clean
(make sure there is no dust, water stains, oil), tear the tape on the base (be careful not
to let the hand or other things touch the glue layer), put the recorder on the front glass
(make sure the recorder is flat, paste after don't take down secondary paste, this will
stick not strong), connect all the special extension cords to the recorder , finally put the
recorder USB connector inserted into the android screen USB interface.

Vi. Software Installation Method:

1.The company designed USB recorder theme, in the car navigation need to install
special APK software use, installation software has built-in the USB recorder machine,
just plug the recorder navigation, into the navigation file manager or APK installer, find
the external U disk, you can see the installation software uCardvr.apk perhaps car. Now,
apk, as shown below:

3
If the car is installed with the ES file browser, enter the selection of external U disk, you
can also see the APK installation software uCardvr. The apk is shown below:

4
 Click on the uCardvr. Install the apk:

After
installation,
the
software
icon of

5
high-definition recorder or hyperclear recorder will appear in the navigation application.
Click that and you can preview the screen, settings, playback and other operations:

2. Description of the interface function

7. ADAS safe driving assistance installation and

debugging methods
It is clear that the company's standard ADAS safe driving assistance is a professional version of true ADAS,
which must be accurately used only after background authorization, manual correction and road collection
data calibration. All false ADAS that can be used without authorization, correction and calibration are not
owned by the Company, and the Company will not be liable for any problems.

1. Installation
First, make sure that the Android screen is connected to the Internet. Click the setting
icon in the lower right corner of the recorder preview interface- -about- -detect the new
6
version, download and install the new version of the software, as shown in the figure
below:

2. Commissioning
2.1 After the software is downloaded and installed, please keep the Android large screen
network open, open the recorder APP software and enter the recorder preview screen.
ADAS will be authorized from the background and enter the ADAS working interface
after successful authorization, as the figure is shown below:

2.2 After the successful authorization of ADAS, it is no longer necessary to use the
Android large-screen network at this time, but the Android large-screen GPS must be
able to locate. The use of the auxiliary function of the recorder is to accurately locate the
Android GPS of the large screen. If the recorder picture at the bottom GPS no latitude
and longitude, all is "0", then turn on the android Scott map, check Scott map have
satellite positioning, if not, please replace the GPS antenna or find the android screen. If
there is satellite positioning, please go to the android car Settings, find privacy settings,
just turn it on. The debugging starts from the correction Angle in the interface setting
item of the recorder, and then drives for a few minutes on the road surface with a white
dividing line. Let the recorder collect the road data after successful calibration. The
7
details are as shown in the figure below:

2.3 Turn on the GPS and display the successful positioning, and then adjust the ADAS
parameters and correct the visual Angle according to the actual situation (if the late
ADAS calibration is successful, the broadcast is not correct). The specific operation is as
shown in the following figure:

8
9
8. Installation of Fixed Electronic Dog Function
First of all, keep the Android large screen network on, turn on the recorder
preview screen, go to the settings, click on the electronic dog icon, then it will pop
up to download the electronic dog data package, then download and install it.
(Disclaimer: this function is only to put the fixed electronic dog data package into
the software, and it does not provide real-time data update, so it cannot do 100%
accurate broadcast, only for reference.）

10
9. Common Troubleshooting:
Before the machine needs to be sent for maintenance, please
compare the following table for the possible causes of the problems of
the machine, and take corresponding countermeasures to make a
simple inspection and small adjustment, it is possible to eliminate the
problem and restore the machine to normal operation.
If you fail to solve the problem according to the solutions
indicated in the table, please contact our company or professional
repair center.
question Possible causes question Possible causes
No hint to Check whether the Frequent Format the TF card /
plug in the record power prompt to replace the
recorder indicator is on / restart the high-speed TF card.
host switch the USB recorder Try / replace the
interface Android large screen
USB tail line (which
must be blocked) /
open the DVR
11
 enhancement mode
under the USB
Settings account in
the Android large
screen factory
Settings
Check to properly
The
insert TF card /
recorder
formatted TF card / Check whether the
does not
replace high-speed The video factory lens
video effect is
TF card protection tape is
not clear
The video Check that the removed
has no microphone is
sound turned on

10. Disclaimer:
1. This product is the record of video and sound and other related information during
the driving process of the vehicle, and the data kept by the instrument are only for
reference. The company shall not be jointly and severally liable for any loss caused by
the bad file and data loss in the abnormal use of the product.
2. We recommend the use of CLASS10 and above memory cards, and in order to
avoid misunderstanding, the following instructions are made: the machine must be in
normal working state. Remove the memory card during the video recording, and during
the video recording, the image file will have the risk of damage or loss.
3. The memory card for the recorder will automatically cover in the use process, and
repeatedly write the card and wipe the card. The erase of the memory card is limited by
the number of times, and a long time will inevitably produce bad channels, resulting in
the video can not be carried out normally. Therefore, it is recommended that users
replace the memory card in time according to their personal driving time. Generally, one
can drive for about 2 hours a day. It is recommended to update the memory card in 6
months.
4. The normal service temperature range of this product is-20℃ to 70℃. Do not use
the recorder in high temperature, low temperature or high humidity environment. Avoid
water and use in excessive dust density.
5. The product will be updated and upgraded from time to time. Some function
descriptions may be different from this description. For details, please refer to the actual
function of the product. This product is only for auxiliary driving only, which can not
12
replace the real-time manual operation or specific environmental requirements!

Product warranty card

Thank you for using our products. This product will provide
after-sales service for one year from the date of purchase. In order to
avoid future disputes, we hereby declare that when purchasing, you
must fill in the required content. No free maintenance will be provided
in the following circumstances:
1. Due to irresistible natural damage caused by earthquake, fire,
flood and power grid damage, public hazards, chemical erosion,
failure damage, expiration of shelf life and failure to show the
after-sales quality assurance certificate.
2. Damage caused by self-disassembly or repair without operating
according to the instructions.
3. Damage caused by the use of parts not from our company for
repair or modification outside the designated repair station of the
company.

Product model:
Product barcode:
Date of purchase:
13
Customer name:
Contact number: Dealer:
User address: Seal place

14