Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 5 views

    TD45 New

    Uploaded by

    ivan alvarez

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TD45 New

    Uploaded by

    ivan alvarez
    5 views2 pages

    Original Title

    TD45 new

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    5 views2 pages

    TD45 New

    Uploaded by

    ivan alvarez

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    THERMODYNAMIC STEAM TRAP

    TD45

    LIMITING CONDITION
    RATING ANSI 600
    PMA 100 bar
    TMA 400°C
    MAX DIFFERENTIAL PRESSURE 45 bar

    SIZES (NPS) CONNECTIONS


    ½” – ¾” – 1” Screwed ASME B1.20.1(NPT) – EN 10226 (BSP)
    Socket Weld ASME B16.11
    Flanged ASME B16.5 – EN 1092

    MAIN FEATURES
    • Discharges air and not condensable gases 2500
    • Integral seat with hardened seating surfaces 2000
    • Operates with superheated steam 1500
    • Simple and compact design
    1000
    • Intermittent discharge
    Flowrate [kg/h]

    25
    500 DN
    ORDERING INFORMATION 20
    DN
    • Inlet pressure 300 15
    DN
    • Back pressure
    200
    • Operating temperature
    • Condensate load
    • End connection 100
    0.1 0.5 1 2 3 5 10 20 40
    Pressure [barg]

    22 CDB ENGINEERING S.P.A.


    THERMODYNAMIC STEAM TRAP TD45

    POS DESCRIPTION MATERIALS SPARES


    1 BODY ASTM A105N/A350 LF2 CL.1
    2 COVER AISI 416
    3 GASKET SS 304 x
    4 DISC AISI 420B x
    5 SCREEN SS 316 x
    6 PLUG GASKET SS 304 x
    7 PLUG ASTM A105N
    8 FLANGE ASTM A105N

    SW RF(150#) RF(300#) RF(600#)


    NPS H1* H2*
    L* kg L* kg L* kg L* kg
    ½” 49 41 76 1 156 1,8 166 2,6 179 2,6
    ¾” 52 46 78 1 162 2,4 171 4 184 4
    1” 55 53 92 2 182 3,8 195 4,4 208 4,4
    *Dimensions are in millimeters

    INSTALLATION MAINTENANCE
    The trap will operate in any position, but the preferred The trap can be maintained without disturbing the piping
    installation is in the horizontal plane with the cap on the connections. Ensure that trap is isolated upstream and
    top. Isolating valve should be installed upstream and downstream before attempting to dismantle it.
    downstream of the trap for safe maintenance. Allow the trap to cool before dismantling.
    Always open isolation valve slowly until normal operating Periodic cleaning of the disc and seat will facilitate trouble
    conditions are achieved to avoid system shocks. free performance. Only the disc and seat are subject to wear.
    A worn disc can be replaced and slight seat can be corrected
    by resurfacing an a lap plate.

    In the interest of products development and improvment, CDB Engineering reserves the right to carry out any necessary modification without prior notice.
    PMA and TMA can change with the materials of steam trap components. For more information please contacts our sales department.

    CDB ENGINEERING S.P.A. 23

    You might also like