SmartRoom

窗帘电机02型
产品使用说明书

2015 南京物联传感技术有限公司
出版号：2015-0616.V01
 欢迎您使用SmartRoom窗帘电机02型产品说明书
● SmartRoom 是南京物联传感技术有限公司的注册商标，本说明书中提到所有其他
产品名称或商标是其各自品牌所有者的商标或注册商标。
●使用前请您认真阅读产品使用说明书，确保正确地、安全地使用。
●SmartRoom窗帘电机02型产品（以下简称“本产品”）为南京物联传感技术有限公
司（以下简称“我司”）出品的智能家居产品。本产品需要与智能家居相应APP客户
端同步使用，并须使用本产品自带的配件，如果您未正确地安装及使用本产品，而造
成的损失，我司将不承担任何责任。
●我司随时可能对本说明书中的产品信息进行更新，恕不另行通知。请您及时关注我
司资讯，自行下载最新版的APP客户端。
●未经我司的明确书面许可，任何个人及企业不得复制本说明书的全部或部分内容，
不得使用我司注册商标。对非法使用我司商标的行为，我司将依法追究行为人及企业
法律责任。
●欢迎您登录我司官网www.wulian.cc，了解更多智能家居产品信息。
产品展示

LED指示灯

多功能按键

电源线

1
基本功能
● 可与绑定开关进行联动，具备各种场景模式，可以实现智能切换；

● 可与相关监控设备联动，根据当前环境的光线强度，自动进行控制；

● 具有轻触功能，轻轻拖动窗帘，便可向拖动方向自动运行；

● 超静音润滑设计，无磨损运行，使用寿命更长；

● APP客户端控制，实现无线控制设备。

2
软件下载
下载方式一：

请扫描本产品包装盒上的二维码，下载最新版本的软件客户端。

下载方式二：

官网软件下载地址：http://www.wulian.cc/service.shtml

温馨提示：初次使用时，请先安装APP客户端，并仔细阅读产品使用说明书；请时
常关注我司资讯，以便及时更新。

3
安装指导
1、本产品为无轨窗帘电机，因此皮带轨道的安装步骤请与轨道供应商联系。

2、开合帘与电机的安装方法
（1）安装尺寸根据墙体来决定最小的距离。

至少=35mm(1.4in)

将支架装在轨道的合适位置上，1米轨道
至少=10mm(0.4in)
需安装两个支架，每增加1米轨道，增加1
个支架，将开合帘轨道装入预先设计的位
置，并用螺丝固定。

图示

4
（2）将电机上端装上轨道的一端，顺时针方向旋转电机直至卡扣到位自动扣合，电
机安装完成。

（3）将电机下端的电线接入电源，蓝色线与零线对接，棕色线与火线对接，绿色或
黄色线与接地线对接。

蓝色线=零线
注意：
棕色线=火线 安装前请先确认电源已关闭，电
工作业危险,非专业人士不得擅自
绿、黄色线=接地线 操作。
220V/50Hz

（4）排好线缆，安装完成。

5
联网设置
1、使用场景
轨道

电机

窗帘

窗帘控制器 switch
close

注：请确认无线网关（需另外购买）网络正常工作。请确认本产品处于通电状态，
且处于无线网关的有效通信距离内。

6
2、加网设置
快击电机下端【多功能按键】4次，申请加入ZigBee网络，搜索网络中，【LED指示
灯】闪烁；成功加入ZigBee网络后，【LED指示灯】长亮2秒后熄灭。

2 【LED指示灯】先闪烁，
然后长亮2秒后熄灭

1 快击4次，单次快击时间不超过1秒

7
3、退网设置
长按电机下端的【多功能按键】10秒后，【LED指示灯】闪烁4次后熄灭，恢复为出
厂设置，同时退出ZigBee网络。

2 【LED指示灯】闪烁4次后熄灭

1 长按10秒

8
4、绑定设置

快击【多功能按键】3次进行绑定，绑定成功后，【LED指示灯】快速闪烁3次，如果
20秒内绑定不成功，则【LED指示灯】快速闪烁6次。

注：本产品可以跟物联的墙面场景开关或遥控器等辅件绑定，绑定成功后，可以用墙
面场景开关或遥控器直接对其进行操作，详细操作请参考相关辅件的操作说明书。

9
使用指南
1、轻轻拖动窗帘，窗帘即向拖动的方向自动运行，直至全开或全闭。

2、通电后，让窗帘完全打开、闭合一次，电机自动获取轨道长度后，【LED指示灯】
呈红色闪烁4下：打开、关闭、停止、手拉窗帘时，电机下端【LED指示灯】呈红色
闪烁一下。

10
注意事项
●安装前，请先切断电源！带电作业危险，非专业人士不得擅自操作。

●安装时，请根据轨道的长度和开合帘的尺寸及其说明书，进行安装电机。

●为保护电机，每次操作时间间隔不低于1秒。

●请将本产品安装在干燥清洁的地方，以免内部元器件受潮或其他杂物进入影响使用效
果。

●本产品应避免跌落、撞击，以免损坏内部器件。

●请勿擅自拆卸或改装本产品及其配件。

●若本产品发生故障，非专业人员不得打开本产品，应送到当地维修点进行维修，
或直接与我司客服联系。

11
规格参数
通信协议 IEEE 802.15.4 （ZigBee/SmartRoom）
天线类型 PCB天线
电源参数 AC 220V±10%
额定电流 0.34A
负载功率 75W
安全载重 100kg
打开、关闭速度 20cm/s
轨道长度 ≤12m
扭矩 1.2Nm
外壳材料、颜色 PC，白色
重量、净重 1.2kg
绝缘等级 F
工作环境温湿度 温度-10℃～+45℃ 湿度≤95%RH（不凝结）

12
订购信息
产品名称 SmartRoom窗帘电机02型

产品型号 SR-ZCCENPW-M142011-02

材质颜色 PC，白色

货号 SRPN1307321

13
南京市雨花台区凤集大道15号创业创新城-北柚11栋
邮编：210039
服务热线：400-928-9288
官网：www.wulian.cc
SmartRoom
Smart Curtain Motor
User Manual

©2015 Nanjing IoT Sensor Technology Co., Ltd.

Publication Number: 2015-0616.V01
 Welcome to Use Smart Curtain Motor
User Manual
● SmartRoom is the registered trademark of Nanjing IOT Sensor Technology Co., Ltd.
All the other trademarks and registered trademarks mentioned in this manual are
trademarks or registered trademarks of their respective owners.
●Please read this manual carefully for the proper use of this product.
●Smart Curtain Motor (hereinafter referred to as “this product” ) are smart home products
produced by Nanjing IOT Sensor Technology Co., Ltd. (hereinafter referred to as “Wulian” ).
This product shall be used with smart home APP as well as the supplied accessories. Wulian
is not responsible for any loss due to improper installation and usage of this product.
●Please check the Wulian website periodically for manual and APP update availability and
the relevance.
●Without the written permission of Wulian, any individuals and enterprises shall not copy all
or part of the contents of this manual, or use our registered trademark. Any illegal use of our
trademarks shall be investigated according to law.
●For more information about smart home products, please visit: www.wulian.cc/english.
Product Illustration

LED Indicator

Multi-Functional Key

Power Line

1
Features
● Make linkage with binding switch to create scene modes, and it can realize smart scene
switchover.
● Make linkage with related monitoring devices, controlling devices automatically as per
light intensity around environment.
● Have gentle touch function. Gentle pull of curtain can make curtain move automatically
along pull direction.
● Ultra-silence and lubrication design brings about non-abrasion operation and long working life.
● Realize wirelessly control devices by APP client.

2
Software Download
Option A: Download the latest smart APP by scanning QR code on the package box of this
product.
Option B:
iOS user can download the APP by searching "Wulian Smart home" in "APP Store".
Android user can download the APP by searching "Wulian Smart home" in "Google Play".

Warm prompt: For the first use, please download smart home APP and read user manual
carefully. Please pay attention to Wulian information to download the latest APP in time.

3
Installation Instruction
1.This product is trackless curtain motor. Therefore, please contact track suppliers for
installation steps of belt track.

2.Installation method for blinds & Motor

（1）Installation measure depends on minimum distance from wall as per below illustration.

Minimum Distance 35mm(1.4inch)

Install stand on the right position of track.

Minimum Distance 10mm(0.4inch)
2*stand are needed installing on the 1meter
long track. In this way, track increases by 1m,
1 more stand is needed. Install blinds track in
the preset position, and fix it via screws.
Illustration

4
（2）Attach top end of motor to one end of track. Rotate motor clockwise to fasten motor.
Then finish installation.
（3）Connect wires at the bottom end of motor to power. Blue wire is for null line, brown
wire for live line, green wire or yellow wire for earth line.

Blue Wire for Null Caution:

Brown Wire for Live Cut down the power before installation!
It’s dangerous to operate with power
Green Wire or Yellow on.Non-professional operation is strictly
220V/50Hz prohibited.
Wire for Earth Line

（4）Put cables in order to finish installation.

5
Network Setting
1、Usage Scenario
Track

Motor

Blinds

Curtain Controller switch

close

Notes: Before setting, please make sure the gateway (additional purchase) works normally.
Ensure that power is supplied to this product, and it is within the effective communication
range of the gateway.
6
2. Add ZigBee Network
Quickly click [Multi-Functional Key] at the bottom end of motor 4 times to apply for joining
ZigBee network. While searching networking, [LED Indicator] is flashing. After joining
ZigBee network successfully, [LED Indicator] is on 2 seconds, and then goes out.

[LED Indicator] flashes first.

2
Be on 2s, and then goes out.

Quickly click 4 times,

1
and each click is less than 1s.

7
3.Exit ZigBee Network
Long press [Multi-Functional Key] at the bottom end of motor 10 seconds. [LED Indicator]
flashes 4 times, and then goes out. This product will restore to factory settings, and exit
ZigBee network.

[LED Indicator] flashes 4 times,

2
and then goes out.

1 Long press 10 seconds.

8
4.Binding Setting
Quickly click [Multi-Functional Key] 3 times to make binding. After a successful binding,
[LED Indicator] is flashing 3 times. If binding fails within 20s, [LED indicator] is flashing 6
times.
Notes: This product can make binding with smart scene switch or accessories such as remote
controller. After a successful binding, it can be operated directly via smart scene switch or
remote controller. Please refer to User Manual for related accessories for detailed operation.

9
User Guide
1. Gentle pull of curtain can make curtain move automatically along pull direction till curtain
is opened or closed completely.
2. Connect this product to power. Have curtain be opened and closed completely. After smart
motor gets track length, [LED Indicator] flashes in red 4 times. When you open, close, stop,
or pull manually curtain, [LED Indicator] at the bottom end of motor flashes in red once.

10
Cautions
●Cut down the power before installation! It’s dangerous to operate with power on.
Non-professional operation is strictly prohibited.
●Install motor according to track length, blinds measure, and manual.
●Operation interval time is not less than 1s for protecting motor.
●This product should be installed in dry and clean place to prevent inner component from
dampness or other debris.
●Avoid fall or sever collision for this product to prevent from damage of internal components.
● Please do not disassemble or refit this product and accessories.
●If this product breaks down, non-professional staff shall not handle it. Send it to local
service center for repair, or contact our customer service staff.

11
Specification Parameter
Communication Protocol IEEE 802.15.4 （ZigBee/SmartRoom）
Antenna Type PCB
Power Parameter AC 220V±10%
Rated Current 0.34A
Load power 75W
Safety Load 100kg
Start/Closing Speed 20cm/s
Track Length ≤12m
torque 1.2Nm
Shell Material & Color PC，White
Weight/Net Weight 1.2kg
Insulation class F
Operating Temperature Temperature-10℃～+45℃
/Humidity Humidity≤95%RH (Noncondensing)

12
Purchasing Information
Product Name Smart Curtain Motor

Model SR-ZCCENPW-M142011-02

Material & Color PC，White

Item No. SRPN1307321

13
Building 11, No.15, Fengji Road, Yuhuatai District, Nanjing (P. C.: 210039)
Email: overseas@wuliangroup.com
Service Hotline: 400-889-2891
www.wulian.cc/english