R20

Code No: R20A0511

MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
III B.Tech I Semester Regular Examinations, December 2022
Software Engineering-SET-1
(CSE, IT, CSE-CS, CSE-AIML, CSE-IOT)
Roll No

Time: 3 hours Max. Marks: 70

Note: This question paper Consists of 5 Sections. Answer FIVE Questions, Choosing ONE
Question from each SECTION and each Question carries 14 marks.
***
SECTION-I
1 A Discuss about failure curves for hardware and software with a neat diagram. [7M]
B Illustrate about generic process framework activities for software [7M]
engineering.
OR
2 A Describe about software engineering layers with a neat diagram. [7M]
B Differentiate between waterfall and incremental model. [7M]
SECTION-II
3 A Illustrate about Functional Requirements and Non-functional Requirements. [7M]
B Interpret about the feasibility studies of requirements engineering process. [7M]
OR
4 A Describe about requirements validation and management. [7M]
B Explain about the importance of sequence and activity diagrams in system [7M]
design.
SECTION-III
5 A Describe about translating the requirements model into the design model. [7M]
B [7M]
OR
6 A Briefly explain about software design concepts. [7M]
B Discuss about the 3 golden rules of performing user interface design. [7M]
SECTION-IV
7 A Analyze about flow graph notation and independent paths with an example [7M]
B Briefly explain about different categories of risks in risk management. [7M]
OR
8 A Describe about graph-based testing methods with an example. [7M]
B Elaborate about RMMM plan in software projects. [7M]
SECTION-V
9 A Discuss about the elements of software quality assurance. [7M]
B Briefly explain about software reliability in software projects. [7M]
OR
10 A Describe about the software quality in software development. [7M]
B [7M]
**********

Page 1 of 1
Code No: R20A0511
R20
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
III B.Tech I Semester Regular Examinations, December 2022
Software Engineering
(CSE, IT, CSE-CS, CSE-AIML, CSE-IOT)
Roll No

Time: 3 hours Max. Marks: 70

Note: This question paper Consists of 5 Sections. Answer FIVE Questions, Choosing ONE
Question from each SECTION and each Question carries 14 marks.
***
SECTION-I
1 A Briefly explain about advantages of prototype model with a neat diagram. [7M]
B Describe about different types of software myths. [7M]
OR
2 A Elaborate about the unified process model with a neat diagram. [7M]
B Interpret about personal and team process models in software development. [7M]
SECTION-II
3 A Illustrate about software requirements document with an example. [7M]
B Discuss about functional and non-functional requirements with an example. [7M]
OR
4 A Describe about structural and behavioral diagrams in uml. [7M]
B Interpret about requirements elicitation and analysis in requirements [7M]
engineering process
SECTION-III
5 A Describe architecture in software design. [7M]
B Outline the different types of architectural styles used in developing a [7M]
software product.
OR
6 A Briefly explain about importance of data-centered architecture with a neat [7M]
diagram.
B Elaborate about the user interface analysis and design in software [7M]
development.
SECTION-IV
7 A Analyze about unit testing and integration testing. [7M]
B Briefly explain about debugging process with a neat diagram. [7M]
OR
8 A Describe about black-box testing with an example. [7M]
B Differentiate between reactive vs proactive risk strategies. [7M]
SECTION-V
9 A Discuss about the important activities involved in management of software [7M]
quality assurance.
B Briefly explain about goals attributes and metrics of software quality [7M]
assurance.
OR
10 A Describe about the measures of reliability and safety in software quality [7M]
assurance.
B Analyze about the iso 9000 quality standards [7M]
**********

Page 1 of 1
 R18
Code No: R18A0511
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
II B.Tech II Semester Supplementary Examinations, December 2022
Software Engineering
(IT)
Roll No

Time: 3 hours Max. Marks: 70

Note: This question paper Consists of 5 Sections. Answer FIVE Questions, Choosing ONE Question from each
SECTION and each Question carries 14 marks.
***
SECTION - I
1. a) Briefly discuss the advantages and drawbacks of waterfall model. [7M]
b) Explain the basic principle of Prototyping with an example. [7M]
OR
2. a) Discuss the evolving role of software in light of present day software applications. [7M]
b) Express your understanding on the umbrella activities of a software process. [7M]
SECTION – II
3. a) “Non-functional requirements are also essential for customer satisfaction”-Justify this
statement with suitable justification. [7M]
b) Write short note on requirements validation process. [7M]
OR
4. a) What are the essential components of SRS document? Explain by taking a simple
application of your choice. [7M]
b) Distinguish between functional and non-functional requirements. [7M]
SECTION – III
5. a) What are the golden rules of user interface? Briefly explain. [7M]
b) How can we assess the design quality? Briefly explain. [7M]
OR
6. a) What is the role of software architecture? Describe different software architecture styles.[7M]
b) Write short note on key activities in Object Oriented Design, [7M]
SECTION – IV
7. a) Distinguish between black box and white box testing by taking an example software
application of your choice. [7M]
b) How could you achieve 100% testing coverage? Explain. [7M]
OR
8. a) What do you understand by software testing and how can you decide that the testing can
be stopped. [7M]
b) “It is always advisable to identify and fix the bug during execution phase”-Justify this
statement with suitable justification. [7M]
SECTION – V
9. a) Write short note on RMMM plan. [7M]
b) What are the various categories of risks? Give an overview about Risk
Management. [7M]
OR
10. What is the need of Risk Management and explain various activities connected to Risk
Management? [14M]
***
Code No: R18A0511
R18
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
II B.Tech II Semester Supplementary Examinations, February 2022
Software Engineering
(IT)
Roll No

Time: 3 hours Max. Marks: 70

Note: This question paper Consists of 5 Sections. Answer FIVE Questions, Choosing ONE
Question from each SECTION and each Question carries 14 marks.
***
SECTION-I
1 a) Explain about process frame work in software engineering. [8M]
b) Explain different applications of software. [6M]
OR
2 a) Explain the unified process model with a neat sketch. [10M]
b) Write a short note on extreme programming. [4M]
SECTION-II
3 a) Explain about requirements elicitation and analysis. [8M]
b) Explain about system requirements and user requirements. [6M]
OR
4 What is a system model? Explain different types of system models. [14M]

SECTION-III
5 a) Explain about software architecture with suitable example. [8M]
b) Discuss about data design. [6M]
OR
6 a) How can you design user interface? Explain. [8M]
b) Briefly explain object oriented design process. [6M]
SECTION-IV
7 a) What do you mean by software testing? Explain about integration testing. [8M]
b) Explain about system testing. [6M]
OR
8 a) Explain different software product metrics. [10M]
b) Write a note on software quality factors. [4M]
SECTION-V
9 Explain about risk management. [14M]
OR
10 a) Explain about CMMI. [7M]
b) What is the need of Software Quality Assurance. [7M]
**********

Page 1 of 1
 R18
Code No: R18A0511
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
II B.Tech II Semester Regular/Supplementary Examinations, July 2021
Software Engineering
(IT)
Roll No

Time: 3 hours Max. Marks: 70

Answer Any Five Questions
All Questions carries equal marks.
***
1 a) Define the term Software Engineering. Describe its various [7M]
characteristics. [7M]
b) State and explain various types of software myths related to
management.

2 a) Explain Waterfall model with a neat diagram. [10M]

b) Write the advantages and disadvantages of waterfall model. [4M]

3 a) Explain clearly about software requirements document. [7M]

b) Differentiate between functional and non-functional [7M]
requirements.

4 Discuss about principal requirements engineering process activities [14M]

with a neat diagram.

5 Write the taxonomy of architectural styles and give a brief description [14M]
of each style.

6 a) Explain about user interface design. [8M]

b) Explain the golden rules of user interface design. [6M]

7 a) Explain about unit testing considerations and procedures. [7M]

b) Write the differences between black box testing and white box [7M]
testing.

8 a) Explain about formal technical reviews. [7M]

b) What is RMMM? Explain about RMMM plan. [7M]
**********

Page 1 of 1
 R18
Code No: R18A0511
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
III B.Tech I Semester Regular/Supplementary Examinations, Dec-21/Jan-22
Software Engineering
(CSE)
Roll No

Time: 3 hours Max. Marks: 70

Note: This question paper Consists of 5 Sections. Answer FIVE Questions, Choosing ONE
Question from each SECTION and each Question carries 14 marks.
***
SECTION-I
1 List and explain the following [7M]
a) Activities of generic process framework for software engineering
b) Umbrella activities [7M]
OR
2 What is a software myth? Explain the changing nature of the software. [14M]
SECTION-II
3 List and explain distinct tasks of requirements engineering [14M]
OR
4 Explain the Functional and Non-Functional requirements [14M]
SECTION-III
5 What is design process? Explain the characteristics of good design [14M]
OR
6 What is software architecture? Why is it so important?. [14M]
SECTION-IV
7 What is software testing? Explain unit testing in detail. [14M]
OR
8 Explain the metrics for Testing? [14M]
SECTION-V
9 Differentiate between Reactive and Proactive risk strategies [14M]
OR
10 Define RMMM? Explain RMMM plan in detail [14M]
**********

Page 1 of 1
Page 2 of 1
Code No: R18A0511 R18
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
III B.Tech I Semester Supplementary Examinations, July/August 2021
Software Engineering
(CSE)
Roll No

Time: 3 hours Max. Marks: 70

Answer Any Five Questions
All Questions carries equal marks.
***
1 a)Discuss about the role of Changing Nature of Software and Software myths in [7M]
software engineering [7M]
b)Explain spiral model with its merits and demerits
2 a) Explain in detail about various process models. [7M]
b) What is the role of process assessment in the process framework [7M]
3 a) Differentiate between functional and non-functional requirements. [7M]
b) Discuss the various steps in requirement engineering. What are the work [7M]
products of engineering the requirements?
4 a)Explain the Functional and non-functional requirements in requirement [7M]
engineering [7M]
b) Explain Context Models and Behavioral models with their importance
5 a)Define Software architecture. Explain why it may be necessary to design the [7M]
system architecture before the specifications. Compare function oriented and [7M]
object oriented designs.
b)What do you mean by the terms cohesion and coupling in the context of
software engineering? How are these concepts useful in arriving at a good design
of a system explain with example.
6 a)Explain the process of mapping dataflow into software architecture. [7M]
b)List the golden rules of user interface design [7M]
7 a) What do you mean by risk management? Explain how to select the best risk [7M]
reduction technique when there are many ways of reducing a risk? [7M]
b) Explain about formal technical reviews.
8 a)Define software quality assurance .State various SQA activities [7M]
b) What are the main objectives of Software verification and validation?Briefly [7M]
explain different V and V techniques.
**********

Page 1 of 1
 R18
Code No: R18A0511
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
II B.Tech II Semester Regular Examinations, October/November 2020
Software Engineering
(IT)
Roll No

Time: 2 hours Max. Marks: 70

Answer Any Four Questions
All Questions carries equal marks.
***
1 a) Define software engineering and discuss about software myths
b) Illustrate the software process framework
2 a) Compare the incremental model and spiral model with neat diagram
b) List out the merits and demerits of waterfall model
3 What do you mean by feasibility study? Demonstrate functional and non-functional
requirements with suitable examples
4 Explain the data models with suitable examples
5 a) Explain Golden rules for user interface design
b) Discuss about Software architecture
6 Explain in detail about object oriented design process with suitable examples
7 a) Illustrate a strategic approach to software testing
b) Explain the concept of Debugging
8 What do you mean by SQA and Explain the ISO 9000 Quality Standards
**********

Page 1 of 1
 R18
Code No: R18A0511
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
III B.Tech I Semester Supplementary Examinations, June 2022
Software Engineering
(CSE)
Roll No

Time: 3 hours Max. Marks: 70

Answer Any Five Questions
All Questions carries equal marks.
***
1 With a neat diagram explain the spiral model [14M]

2 Explain the phases of unified process model with a diagram [14M]

3 Explain the following with respect to requirements validation

[7M]
a) Different types of checks
[7M]
b) Requirements validation techniques

4 Explain in detail about Event-driven and Data-driven modeling [14M]

5 Explain object oriented design process using UML [14M]

6 Explain the following software architectures

[7M]
a) Data flow Architecture
[7M]
b) Call and Return Architectures

7 Explain black-box and White-box testing [14M]

8 Explain Capability Maturity Model Integration (CMMI) in detail [14M]

**********

Page 1 of 1
 R18
Code No: R18A0511
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
II B.Tech II Semester Supplementary Examinations, June 2022
Software Engineering
(IT)
Roll No

Time: 3 hours Max. Marks: 70

Answer Any Five Questions
All Questions carries equal marks.
****
1. Discuss various phases of waterfall model in detail. (14M)

2. a) What is unified process? Discuss its suitability to present day software applications (7M)
b) Write short note on various categories of myths connected to software industry.(7M)
3. a) What is the use of an Activity diagram and draw an activity diagram for withdrawing
money from a Bank ATM. (7M)
b) How do you create a process that can manage requirements unpredictability?Explain. (7M)

4. a) Draw the sequence diagram for booking an item in an online ecommerce website. (7M)
b) Explain software requirements engineering process in brief. (7M)

5. a)What are the merits of an Object Oriented Design process? Explain. (7M)
b) Write short note on Design concepts. (7M)

6. a) What is modularity and write its importance by keeping maximization of cohesion and
minimization of coupling as the basis. (7M)
b) “Work breakdown structure helps in on time delivery of software products”. Justify this
statement. (7M)

7. a) Why does software testing need extensive planning? Explain. (7M)

b) Write short note on the metrics for software design model. (7M)

8. a) Write short note on CMMI and its role in quality improvement. (7M)
b) What is the importance of FTR in software quality assurance and write various steps in
carrying out FTR. (7M)

***
 R18
Code No: R18A0511
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
III B.Tech I Semester Supplementary Examinations, November 2022
Software Engineering
(CSE)
Roll No

Time: 3 hours Max. Marks: 70

Note: This question paper Consists of 5 Sections. Answer FIVE Questions, Choosing ONE
Question from each SECTION and each Question carries 14 marks.
***
SECTION-I
1 A List the general principles & Process Frame work in software engineering [7M]
B Compare different types of myths in Software Engineering [7M]
OR
2 A Discuss in detail about the layers involved in Unified Process model [7M]
B Sketch and explain Evolutionary model. [7M]
SECTION-II
3 A Classify different types of Requirements. [4M]
B Discuss how an engineer responsible for drawing up a system requirements [10M]
specification might keep track of the relationships between functional and
non-functional requirements.
OR
4 A What is the main aim of requirement Engineering? Describe its four sub- [7M]
processes and deliverable of each sub-process?
B What is SRS Document? Explain in detail about the structure of a software [7M]
requirement document
SECTION-III
5 A Explain about the various design concepts considered during design? [7M]
B With a neat diagram, explain various architectural styles & patterns? [7M]
OR
6 A Explain the following terms with respect to software design: [7M]
(i) Data design (ii) architectural design with neat Examples
B Describe the golden rules of User Interface Design [7M]
SECTION-IV
7 What is black box testing? Explain the different types of black box testing [14M]
strategies. Explain by considering suitable examples.
OR
8 A Discuss in detail about various software testing strategies. [7M]
B What are the Various Metrics used for analysis and Design? [7M]
SECTION-V
9 A Propose RMMM plan for “staff inexperienced” risk while developing a [7M]
software project
B What is the necessity of Quality assurance in Software Engineering? [7M]

1
 OR
10 A What is Meant by Software Quality? Give an overview of various software [7M]
Quality factors?
B What is SQA? Discuss in detail SQA Activities? [7M]
**********

2
 R17
Code No: R17A0511
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
II B.Tech II Semester Supplementary Examinations, February 2022
Software Engineering
(IT)
Roll No

Time: 3 hours Max. Marks: 70

Note: This question paper Consists of 5 Sections. Answer FIVE Questions, Choosing ONE
Question from each SECTION and each Question carries 14 marks.
***
SECTION-I
1 a) Discus the evolving role of Software. [8M]
b) What is Team Software Process and list out its objectives? [6M]
OR
2 How the waterfall and the prototyping models can be accommodated in the spiral [14M]
process model. Analyze.
SECTION-II
3 a) What is requirement engineering? State its process and illuminate the [8M]
requirements of elicitation problem. [6M]
b) Why the customer interaction is a difficult process? Explain one formal
procedure used for customer interaction.
OR
4 a) Differentiate between data models and object models with illustration [7M]
b) How do you fit the right prototyping approach in software system models? [7M]
Explain.
SECTION-III
5 a) Illustrate design quality in the context of design engineering. [7M]
b) How Software architecture is useful in creating an architectural design. [7M]
OR
6 Explain about the User interface analysis and design. [14M]
SECTION-IV
7 a) Contrast the validation testing with system testing. [7M]
b) Interpret the art of debugging in software testing methodology. [7M]
OR
8 Discuss about the Metrics for testing and source code. [14M]
SECTION-V
9 a) Illustrate reactive vs. proactive risk strategies in risk management. [7M]
b) How far the risk refinement is useful in risk management. [7M]
OR
10 a) Describe the software quality assurance. [7M]
b) Exemplify software reliability. [7M]
**********

Page 1 of 1
 R17
Code No: R17A0511
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
II B.Tech II Semester Supplementary Examinations, July 2021
Software Engineering
(IT)
Roll No

Time: 3 hours Max. Marks: 70

Answer Any Five Questions
All Questions carries equal marks.
***
1 a) What do you mean by Software Myth? Explain Management Myths and [7M]
Customer Myths.
b) Explain a generic process framework for software engineering activities. [7M]

2 Explain the process areas required to achieve various maturity levels in CMMI. [14M]

3 a) Differentiate between functional and non-functional requirements in software [7M]

engineering.
b) Explicit effects on software requirement collection? [7M]

4 Interpret the Context Models and Behavioural models. [14M]

5 a) What is design process and clarify it with respect to design engineering? [7M]
b) Analyse the data design and architectural styles in software engineering [7M]
process.

6 a) Elucidate in detail about the characteristics and criteria for a good design. [7M]
b) Describe the design procedure for data acquisition system. [7M]

7 Why is it so important to include boundary values in your black-box test data? [14M]
Illustrate with examples in which a test suite developed using black box
techniques might give the impression that ‘everything is OK”, while a test suite
developed with whit box testing techniques (for example, branch coverage) might
uncover a fault and vice versa.

8 a) Deliberate the procedure of formal technical reviews in testing the software. [7M]
b) Identify the importance of the ISO 9000 quality standards in improving [7M]
software quality.

**********

Page 1 of 1
 R17
Code No: R17A0511
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
III B.Tech I Semester Supplementary Examinations, July/August 2021
Software Engineering
(CSE)
Roll No

Time: 3 hours Max. Marks: 70

Answer Any Five Questions
All Questions carries equal marks.
****
1 What is CMMMI? Explain in detail about CMMMI. [14M]

2 Explain spiral model with its merits and demerits. [14M]

3 Briefly explain the models used for structured analysis. [14M]

4 Define the term software requirement. Explain different types of software [14M]

requirements.

5 Explain about design concepts. [14M]

6 What is the need of user interface? Explain user interface design steps. [14M]

7 Define software testing. Explain different software testing strategies. [14M]

8 What is the need of software reviews? Explain. [14M]

**********

Page 1 of 1
 R17
Code No: R17A0511
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
III B.Tech I Semester Supplementary Examinations, Dec-21/Jan-22
Software Engineering
(CSE)
Roll No

Time: 3 hours Max. Marks: 70

Note: This question paper Consists of 5 Sections. Answer FIVE Questions, Choosing ONE
Question from each SECTION and each Question carries 14 marks.
***
SECTION-I
1 Discuss in detail about the layers involved in Unified Process model. [14M]

OR

2 Explain different software myths with respect to management, customer and [14M]
practitioner with neat case studies.
SECTION-II
3 What is SRS Document. Explain in detail about the structure of a software [14M]
requirement document.

OR
4 Draw an ER and DFD diagram for university information system. [14M]

SECTION-III
5 Draw a translating diagram for analysis model into a software design. [14M]
Brief about each translations.
OR
6 Discuss the steps involved in effective User interface design. [14M]
SECTION-IV
7 Explain control structure testing. What are the different testing techniques [14M]
involved in it?
OR
8 Explain in detailed about Black-Box and White-Box testing. [14M]
SECTION-V
9 Explain software quality assurance? [14M]
OR
10 Analyze on the concept of risk projection. [14M]
**********

Page 1 of 1
 R17
Code No: R17A0511
MALLA REDDY COLLEGE OF ENGINEERING & TECHNOLOGY
(Autonomous Institution – UGC, Govt. of India)
II B.Tech II Semester Supplementary Examinations, July 2021
Software Engineering
(IT)
Roll No

Time: 3 hours Max. Marks: 70

Answer Any Five Questions
All Questions carries equal marks.
***
1 a) What do you mean by Software Myth? Explain Management Myths and [7M]
Customer Myths.
b) Explain a generic process framework for software engineering activities. [7M]

2 Explain the process areas required to achieve various maturity levels in CMMI. [14M]

3 a) Differentiate between functional and non-functional requirements in software [7M]

engineering.
b) Explicit effects on software requirement collection? [7M]

4 Interpret the Context Models and Behavioural models. [14M]

5 a) What is design process and clarify it with respect to design engineering? [7M]
b) Analyse the data design and architectural styles in software engineering [7M]
process.

6 a) Elucidate in detail about the characteristics and criteria for a good design. [7M]
b) Describe the design procedure for data acquisition system. [7M]

7 Why is it so important to include boundary values in your black-box test data? [14M]
Illustrate with examples in which a test suite developed using black box
techniques might give the impression that ‘everything is OK”, while a test suite
developed with whit box testing techniques (for example, branch coverage) might
uncover a fault and vice versa.

8 a) Deliberate the procedure of formal technical reviews in testing the software. [7M]
b) Identify the importance of the ISO 9000 quality standards in improving [7M]
software quality.

**********

Page 1 of 1