Bill of Materials

TI DESIGNS

Designator Quantity Value Description PackageReference PartNumber Manufacturer

R15 1 100k, DNP RES, 100k ohm, 5%, 0.1W, 0603 DNP DNP
R13, R17, 3 10k, DNP RES, 10k ohm, 5%, 0.1W, 0603 DNP DNP
R18 0603
R19 1 3.0k, DNP RES, 3.0k ohm, 5%, 0.1W, 0603 DNP DNP
0603
C20, C21 2 220uF CAP, AL, 220uF, 50V, +/- SMT Radial G EEE-FC1H221P Panasonic
20%, 0.3 ohm, SMD
C11 1 47uF CAP, AL, 47uF, 25V, +/-20%, SMT Radial D EEE-FK1E470P Panasonic
0.36 ohm, SMD
C14 1 0.015uF CAP, CERM, 0.015uF, 50V, 0603 GRM188R71H153KA01D MuRata
+/-10%, X7R, 0603
C24 1 0.01uF CAP, CERM, 0.01uF, 100V, 0603 C1608X7R2A103K TDK
+/-10%, X7R, 0603
C3 1 0.022uF CAP, CERM, 0.022uF, 50V, 0603 C1608X7R1H223K TDK
+/-10%, X7R, 0603
C2, C9, 3 0.1uF CAP, CERM, 0.1uF, 100V, +/- 0603 GRM188R72A104KA35D MuRata
C22 10%, X7R, 0603
C23, C34, 5 0.1uF CAP, CERM, 0.1uF, 16V, +/- 0603 C0603C104J4RACTU Kemet
C35, C36, 5%, X7R, 0603
C37
C12, C19 2 0.1uF CAP, CERM, 0.1uF, 25V, +/- 0603 C1608X7R1E104K TDK
10%, X7R, 0603
C5, C6, C7, 4 0.1uF CAP, CERM, 0.1uF, 50V, +/- 0603 C1608X7R1H104K TDK
C10 10%, X7R, 0603
C31, C32, 3 1000pF CAP, CERM, 1000pF, 50V, +/- 0603 C0603C102J5GAC Kemet
C33 5%, C0G/NP0, 0603
C15 1 120pF CAP, CERM, 120pF, 50V, +/- 0603 GRM1885C1H121JA01D MuRata
5%, C0G/NP0, 0603
C13 1 1uF CAP, CERM, 1uF, 25V, +/- 0603 C1608X5R1E105K080AC TDK
10%, X5R, 0603
C16, C17 2 1uF CAP, CERM, 1uF, 25V, +/- 0603 GRM188R61E105KA12D MuRata
10%, X5R, 0603
Designator Quantity Value Description PackageReference PartNumber Manufacturer

C1, C8, 5 2.2uF CAP, CERM, 2.2uF, 100V, +/- 1210 GRM32ER72A225KA35L MuRata
C28, C29, 10%, X7R, 1210
C30
C38 1 2.2uF CAP, CERM, 2.2uF, 10V, +/- 0603 C0603C225M8PACTU Kemet
20%, X5R, 0603
C4 1 2.2uF CAP, CERM, 2.2uF, 25V, +/- 0805 GRM219R61E225KA12D MuRata
10%, X5R, 0805
C25, C26, 3 2200pF CAP, CERM, 2200pF, 16V, +/- 0603 GRM188R71C222KA01D MuRata
C27 10%, X7R, 0603
C18 1 6800pF CAP, CERM, 6800pF, 50V, +/- 0603 GRM188R71H682KA01D MuRata
J3, J4 2 20-Pin/2-Row CONN RCPT 20POS .100 DL 89898-310ALF FCI
D3 1 100V Diode, Schottky, 100V, 2A, SMB CDBB2100-G Comchip Technology
U2 1 NUP4201MR6 IC, 500w 6v, Transient SOT NUP4201MR6 On Semi
U1 1 DRV8301DCA IC, 3 Phase Pre-Driver with DRV8301DCA Texas Instruments
U3 1 OPA2374AIDCNx IC, CMOS, R-R I/O Op Amp, SSOP-8 OPA2374AIDCN TI
L1 1 33uH INDUCTOR SHIELD PWR 0.300" sq DR74-330-R Cooper Bussmann
D4, D5 2 GREEN LED THIN 565NM GRN DIFF SML-LXT0805GW-TR Lumex Opto/Components Inc
D1 1 YELLOW LED THIN 585NM YEL DIFF SML-LXT0805YW-TR Lumex Opto/Components Inc
D2 1 RED LED THIN660NM SUPRED SML-LXT0805SRW-TR Lumex Opto/Components Inc
Q1, Q2 2 P_CH MOSFET P-CH 8V 5.4A SI2325DS-T1-E3 Vishey Siliconix
Q3, Q4, 6 CSD18533Q5A MOSFET, N-Chan, 60V, 18A, QFN-8 POWER CSD18533Q5A TI
R14, R16 2 0 RES, 0 ohm, 5%, 0.1W, 0603 0603 CRCW06030000Z0EA Vishay-Dale
R34, R35, 3 0.01 RES, 0.01 ohm, 1%, 3W, 2512 CRA2512-FZ-R010ELF Bourns
R5 1 1.0 RES, 1.0 ohm, 5%, 0.1W, 0603 CRCW06031R00JNEA Vishay-Dale
R44, R45 2 1.00k RES, 1.00k ohm, 1%, 0.1W, 0603 CRCW06031K00FKEA Vishay-Dale
R6, R9 2 1.0k RES, 1.0k ohm, 5%, 0.1W, 0603 CRCW06031K00JNEA Vishay-Dale
R28, R29, 6 10 RES, 10 ohm, 5%, 0.1W, 0603 CRCW060310R0JNEA Vishay-Dale
R8, R43, 4 10.0k RES, 10.0k ohm, 0.1%, 0.1W, 0603 RG1608P-103-B-T5 Susumu Co Ltd
R2, R3, 4 10k RES, 10k ohm, 5%, 0.1W, 0603 CRCW060310K0JNEA Vishay-Dale
R12 1 16.2k RES, 16.2k ohm, 1%, 0.1W, 0603 CRCW060316K2FKEA Vishay-Dale
R11 1 205k RES, 205k ohm, 1%, 0.1W, 0603 CRCW0603205KFKEA Vishay-Dale
R21 1 3.3 RES, 3.3 ohm, 5%, 0.25W, 1206 CRCW12063R30JNEA Vishay-Dale
R7 1 31.6k RES, 31.6k ohm, 1%, 0.1W, 0603 CRCW060331K6FKEA Vishay-Dale
R1, R4, 3 330 RES, 330 ohm, 5%, 0.1W, 0603 CRCW0603330RJNEA Vishay-Dale
R20, R37, 4 34.8k RES, 34.8k ohm, 1%, 0.1W, 0603 CRCW060334K8FKEA Vishay-Dale
R22, R23, 5 4.99k RES, 4.99k ohm, 1%, 0.1W, 0603 CRCW06034K99FKEA Vishay-Dale
R25, R26, 3 56 RES, 56 ohm, 5%, 0.1W, 0603 CRCW060356R0JNEA Vishay-Dale
J2 1 2 Pin Header TERMINAL BLOCK 5.08MM TERM_BLK, 2pos, 5.08mm OSTTA024163 On-Shore Technology
J11 1 3 Pin Header TERMINAL BLOCK 5.08MM TERM_BLK, 3pos, 5.08mm OSTTA034163 On-Shore Technology

Notes:
Unless otherwise noted in the Alternate PartNumber and/or Alternate Manufacturer columns, all parts may be substituted with equivalents.
 IMPORTANT NOTICE FOR TI REFERENCE DESIGNS
Texas Instruments Incorporated ("TI") reference designs are solely intended to assist designers (“Buyers”) who are developing systems that
incorporate TI semiconductor products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains
responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products.
TI reference designs have been created using standard laboratory conditions and engineering practices. TI has not conducted any
testing other than that specifically described in the published documentation for a particular reference design. TI may make
corrections, enhancements, improvements and other changes to its reference designs.
Buyers are authorized to use TI reference designs with the TI component(s) identified in each particular reference design and to modify the
reference design in the development of their end products. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL
OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY
OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right,
or other intellectual property right relating to any combination, machine, or process in which TI components or services are used.
Information published by TI regarding third-party products or services does not constitute a license to use such products or services, or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
TI REFERENCE DESIGNS ARE PROVIDED "AS IS". TI MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE
REFERENCE DESIGNS OR USE OF THE REFERENCE DESIGNS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR
COMPLETENESS. TI DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY
INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO TI REFERENCE DESIGNS OR USE THEREOF. TI SHALL NOT BE LIABLE
FOR AND SHALL NOT DEFEND OR INDEMNIFY BUYERS AGAINST ANY THIRD PARTY INFRINGEMENT CLAIM THAT RELATES TO
OR IS BASED ON A COMBINATION OF COMPONENTS PROVIDED IN A TI REFERENCE DESIGN. IN NO EVENT SHALL TI BE
LIABLE FOR ANY ACTUAL, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES, HOWEVER CAUSED, ON ANY
THEORY OF LIABILITY AND WHETHER OR NOT TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, ARISING IN
ANY WAY OUT OF TI REFERENCE DESIGNS OR BUYER’S USE OF TI REFERENCE DESIGNS.
TI reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per
JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant
information before placing orders and should verify that such information is current and complete. All semiconductor products are sold
subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques for TI components are used to the extent TI
deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not
necessarily performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
Reproduction of significant portions of TI information in TI data books, data sheets or reference designs is permissible only if reproduction is
without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for
such altered documentation. Information of third parties may be subject to additional restrictions.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards that
anticipate dangerous failures, monitor failures and their consequences, lessen the likelihood of dangerous failures and take appropriate
remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in
Buyer’s safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed an agreement specifically governing such use.
Only those TI components that TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components that
have not been so designated is solely at Buyer's risk, and Buyer is solely responsible for compliance with all legal and regulatory
requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2014, Texas Instruments Incorporated