Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 701 views

    Informacast Paging Over MPLS

    Uploaded by

    mstepp
    The document discusses configuring InformaCast paging over an MPLS network using GRE tunneling between a Dallas 2911 router and a Houston 3750 router. Key points: - A GRE tunnel is configured between the Dallas router interface 10.251.29.2 and the Houston router interface 10.249.1.2 to encapsulate multicast traffic and transport it across the MPLS network. - PIM is enabled on the Dallas voice VLAN, Houston voice server VLAN, and GRE tunnel interfaces to establish multicast routes between the sites. - Static mroutes are added for the respective voice VLAN subnets, and the Houston router is configured as the PIM rendezvous point to connect multicast

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Informacast Paging Over MPLS

    Uploaded by

    mstepp
    701 views3 pages
    The document discusses configuring InformaCast paging over an MPLS network using GRE tunneling between a Dallas 2911 router and a Houston 3750 router. Key points: - A GRE tunnel is configured between the Dallas router interface 10.251.29.2 and the Houston router interface 10.249.1.2 to encapsulate multicast traffic and transport it across the MPLS network. - PIM is enabled on the Dallas voice VLAN, Houston voice server VLAN, and GRE tunnel interfaces to establish multicast routes between the sites. - Static mroutes are added for the respective voice VLAN subnets, and the Houston router is configured as the PIM rendezvous point to connect multicast

    Original Description:

    Informacast Paging Over MPLS

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses configuring InformaCast paging over an MPLS network using GRE tunneling between a Dallas 2911 router and a Houston 3750 router. Key points: - A GRE tunnel is configured between the Dallas router interface 10.251.29.2 and the Houston router interface 10.249.1.2 to encapsulate multicast traffic and transport it across the MPLS network. - PIM is enabled on the Dallas voice VLAN, Houston voice server VLAN, and GRE tunnel interfaces to establish multicast routes between the sites. - Static mroutes are added for the respective voice VLAN subnets, and the Houston router is configured as the PIM rendezvous point to connect multicast

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    701 views3 pages

    Informacast Paging Over MPLS

    Uploaded by

    mstepp
    The document discusses configuring InformaCast paging over an MPLS network using GRE tunneling between a Dallas 2911 router and a Houston 3750 router. Key points: - A GRE tunnel is configured between the Dallas router interface 10.251.29.2 and the Houston router interface 10.249.1.2 to encapsulate multicast traffic and transport it across the MPLS network. - PIM is enabled on the Dallas voice VLAN, Houston voice server VLAN, and GRE tunnel interfaces to establish multicast routes between the sites. - Static mroutes are added for the respective voice VLAN subnets, and the Houston router is configured as the PIM rendezvous point to connect multicast

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    InformaCast Paging over MPLS

    Overview
    Traditionally, getting muticast to work over MPLS is difficult. The common workaround is GRE Tunneling. This allows us to encapsulate Multicast traffic inside of a GRE header and transport it through the MPLS network as standard unicast IP. For the InformaCast customer below, a GRE tunnel has been configured between the Dallas and Houston locations. The GRE Tunnel terminates on the Dallas 2911 CPE Interface (10.251.29.2) and the Houston 3750 MPLS CPE Interface (10.249.1.2)

    GRE Tunneled Networks


    MCAST TX-H2W Voice Vlan 10.1.29.128/25 InformaCast Multicast Group Address 239.0.1.2

    MPLS

    2911
    Gig0/0.2 10.1.29.129/25

    Gig0/1 10.251.29.2

    Gig1/0/20 10.249.1.2

    3750
    Vlan 3 10.1.2.1/24

    GRE Tunnel Interfaces

    TX-DAL

    TX-HOU

    orm Inf

    ast aC

    10.1.2.55

    Configuration
    At a high level, we configure GRE between the MPLS CPE routers and PIM enable any interfaces which require an mcast audio stream. In our case, this requires enabling PIM on the Dallas Voice Vlan and the Houston Voice Server Vlan. To ensure multicast routes across the GRE interface, we will add static mroutes for the respective subnets. Dallas to Houston Multicast Tunnel Config Notes Dallas GRE Tunnel Interface: 10.251.29.2 Houston GRE Tunnel Interface:10.249.1.2 Houston PIM Rendezvous Point: 10.1.2.1 Houston InformaCast Server: 10.1.2.55 Houston InformaCast Group Address: 239.0.1.2

    Houston 3750 ip multicast-routing distributed ip pim rp-address 10.1.2.1 ! Statically configure the Houston 3750 as the PIM rendezvous point. PIM uses RPs to connect sources and receivers.
    Morgan Stepp CCIE #12603 | morganstepp@yahoo.com

    Page 1 of 3

    ! interface Tunnel0 description Tunnel to Dallas ip unnumbered GigabitEthernet1/0/20 ip pim dr-priority 255 ip pim sparse-mode tunnel source GigabitEthernet1/0/20 tunnel destination 10.251.29.2 ! ip mroute 10.1.29.128 255.255.255.128 Tunnel0 ! Static Mroute to the Dallas Voice Vlan ! int vl 2 desc Voice Vlan ip add 10.1.29.1 255.255.255.0 ip pim sparse-mode

    Dallas 2911 ip multicast-routing ip pim rp-address 10.1.2.1 ! Statically configure the Houston 3750 as the PIM rendezvous point. ! interface Tunnel0 description Tunnel to Houston ip unnumbered GigabitEthernet0/1 ip pim sparse-mode tunnel source GigabitEthernet0/1 tunnel destination 10.249.1.2 ! int gig 0/0.2 desc voice server vlan ip add 10.1.29.129 255.255.255.128 ip pim sparse-mode ! ip mroute 10.1.2.0 255.255.255.0 Tunnel 0 ! Static Mroute to the Houston Voice Server Vlan
    TX-DAL-2911#show ip pim int 10.1.29.129 GigabitEthernet0/0.2 v2/S 0 30 1 10.1.29.129 10.251.29.2 Tunnel0 v2/S 1 30 1 0.0.0.0 ! PIM Configured on Dallas voice vlan and GRE tunnel TX-DAL-2911#show ip pim neigh PIM Neighbor Table 10.249.1.2 Tunnel0 00:02:39/00:01:31 v2 255/ S P G ! Houston Corp 3750 joined as PIM Neighbor to Dallas 2911 TX-DAL-2911#show ip rpf 10.1.2.55 RPF information for (10.1.2.55) RPF interface: Tunnel0 RPF neighbor: (10.249.1.2) RPF route/mask: 10.1.2.0/24 RPF type: multicast (static) Doing distance-preferred lookups across tables RPF topology: ipv4 multicast base
    Morgan Stepp CCIE #12603 | morganstepp@yahoo.com

    Page 2 of 3

    ! Houston InformaCast Server passes Reverse Path Forwarding (RPF) check TX-DAL-2911#ping 239.0.1.2 source gig0/0.2 Sending 1, 100-byte ICMP Echos to 239.0.1.2, timeout is 2 seconds: Packet sent with a source address of 10.1.29.129 Reply to request 0 from 10.249.1.2, 12 ms ! Successful test ping from Dallas Voice Vlan at 10.1.29.129 to the InformaCast Multicast Group at 239.0.1.2 TX-DAL-2911#show ip mroute IP Multicast Routing Table Interface state: Interface, Next-Hop or VCD, State/Mode (10.1.29.129, 239.0.1.2), 00:00:40/00:02:53, flags: FT Incoming interface: GigabitEthernet0/0.2, RPF nbr 0.0.0.0 Outgoing interface list: Tunnel0, Forward/Sparse, 00:00:40/00:02:49 ! Houston InformaCast Group Address 239.0.1.2 with Dallas Voice Vlan 10.1.29.129 as source IP. Dallas will forward PIM join requests to its PIM RP at 10.1.2.1.

    Morgan Stepp CCIE #12603 | morganstepp@yahoo.com

    Page 3 of 3

    You might also like