4900 - US - 2006 - POLIFLEX Hose Products

Catalog 4900 polyflex ®
Table of Contents
General Information ................................................... Section A A
polyflex® Hose and Fittings ................................ Section B B
High Pressure Adapters and Valves .......................... Section C C
Quick Couplings ........................................................ Section D D
Accessories/Tooling ................................................... Section E E
Technical Information................................................. Section F F
Alphanumeric Index ................................................... Section G G
Offer of Sale ......................................................................... G8
i Parker Hannifin Corporation

Parflex Division polyflex ® Operations
FluidConnectors
Notes
ii Parker Hannifin Corporation

FluidConnectors
General Information Table of Contents
Table of Contents – Section A

Conversion Table .................................................................... A2
Hose Selection Charts ........................................................... A3
By Working Pressure 2.5:1 ................................................. A3 A
By Working Pressure 4:1 .................................................... A5
By Inside Diameter ............................................................. A7
Hose Fitting Chart .................................................................. A9
Hose Fitting Guide ............................................................... A12
Hose Part Numbering System .............................................. A13
Hose End Fitting Part Numbering System ............................ A13
Ordering Information............................................................. A14
Explanation of Symbols ........................................................ A15
A1 Parker Hannifin Corporation

Parflex Division polyflex ®
FluidConnectors Operations
General Information
Conversion Table
of Old and New Part Numbers of polyflex® Hose
Old Numbers New Numbers Old Numbers New Numbers
1002 MK 2020N-012V30 4012 ST 2440N-08V37
1003 MK 2020N-02V30 4020 ST 2440N-12V37
1004 MK 2020N-025V30 4025 ST 2440N-16V37
1006 K 2040N-04V00
2004 STR 2240D-025V34 6004 ST 2640D-025V32
2004 STV 2243D-025V70 6005 ST 2640D-03V32
2005 STR 2245D-03V32 6008 ST 2640D-05V32
2005 STV 2243D-03V70 6010 ST 2640N-06V32
2006 ST 2245N-04V00 6013 ST 2640N-08V32
2006 STA 2380N-04V33 6020 ST 2640N-12V32
2006 STV 2243D-04V70 6025 ST 2640N-16V32
2008 STT 2240D-05V32
6104 ST 2740D-025V30
2008 ST 2245N-05V00 6105 ST 2740D-03V30
2010 ST 2245N-06V00 6108 ST 2740D-05V32
2013 ST 2245N-08V00
2016 ST 2245N-10V30 8005 ST 2840D-03V34
2020 ST 2245N-12V30
2025 ST 2245N-16V30
2032 ST 2244N-20V30
2104 ST 2244N-025V00
2106 ST 2380N-04V00
2108 ST 2380N-05V00
2113 ST 2244N-08V10
2206 ST 2390N-04V10
2210 ST 2390N-06V013
2213 ST 2390N-08V13
2220 ST 2390N-12V03
2225 ST 2390N-16V12
4004 ST 2440D-025V37
4005 ST 2440D-03V37
4006 ST 2440D-04V37
4008 ST 2440N-05V37
4010 ST 2440N-06V37

General Information
Hose Selection Chart

By Working Pressure 2.5:1
Working Working
Pressure Pressure I.D. O.D. A
2.5:1 4:1 inch inch Hose Number Page No.
6,380 3,990 1.25 1.73 2244N-20V30 B30
6,380 3,990 1.00 1.34 2245N-16V30 B45
6,380 3,987 0.76 1.12 2380F-12V07 B50
6,500 4,100 1.00 1.37 2390N-16V12 B69
6,500 4,100 1.00 1.37 2390N-16V13 B69
6,500 4,100 1.00 1.37 2390N-16V16 B69
6,960 4,350 0.75 1.13 2245N-12V30 B43
7,192 4,495 0.25 0.47 2040N-04V00 B6
7,540 4,710 0.50 0.81 2380F-08V07 B48
N/A 5,000 2.00 2.71 2440N-32V10 B89
8,100 5,575 0.81 1.14 2390N-12V03 B67
8,120 5,075 0.50 0.81 2245N-08V30 B41
8,700 5,440 0.40 0.67 2245N-06V00 B39
8,700 5,437 0.32 0.56 2380F-05V07 B47
9,280 5,800 0.08 0.20 2020N-02V30 B4
9,280 5,800 0.31 0.56 2245N-05V00 B37
10,000 N/A 1.50 2.80 2640N-24V80 B99
10,000 N/A 2.00 3.35 2640N-32V80 B101
10,300 6,450 0.40 0.70 2390N-06V13 B63
10,400 6,500 0.50 0.81 2390N-08V12 B65
10,400 6,500 0.50 0.81 2390N-08V13 B65
10,400 6,500 0.50 0.81 2390N-08V16 B65
10,440 6,525 0.25 0.50 2245N-04V00 B33
10,440 6,525 0.25 0.50 2245N-04V02 B33
10,440 6,525 0.25 0.50 2245N-04V04 B33
11,020 6,890 0.08 0.20 2020N-012V30 B3
12,000 7,500 0.25 0.52 2390N-04V10 B60
12,000 7,500 0.25 0.52 2390N-04V12 B60
12,000 7,500 0.25 0.52 2390N-04V16 B60
12,760 7,970 0.50 0.89 2244N-08V10 B28
12,760 7,970 0.50 0.89 2244N-08V71 B28
13,040 8,150 0.32 0.52 2240D-05V32 B18
13,050 N/A 1.00 1.46 2440N-16V37 B87
13,050 N/A 1.00 1.46 2440N-16V91 B87
13,200 8,250 0.25 0.50 2380N-04V33 B55
13,600 8,500 0.32 0.62 2380N-05V00 B58

General Information

By Working Pressure 2.5:1 – continued
Working Working
Pressure Pressure I.D. O.D.
2.5:1 4:1 inch inch Hose Number Page No.
14,000 8,750 0.25 0.50 2243D-04V70 B23
14,490 9,050 0.25 0.45 2240D-04V32 B15
14,500 N/A 0.81 1.19 2440N-12V37 B85
14,500 N/A 0.81 1.19 2440N-12V91 B85
15,080 N/A 0.50 0.91 2X90N-08V14 B115
15,950 9,970 0.12 0.28 2240D-02V32 B9
16,230 10,145 0.20 0.38 2240D-03V34 B13
16,240 10,150 0.17 0.36 2243D-025V70 B19
16,240 10,150 0.20 0.42 2243D-03V70 B20
16,240 10,150 0.20 0.42 2245D-03V32 B31
16,240 10,150 0.25 0.53 2380N-04V00 B52
16,240 10,150 0.25 0.53 2380N-04V02 B52
16,240 10,150 0.25 0.53 2380N-04V04 B52
16,240 10,150 0.25 0.53 2380N-04V71 B52
17,400 10,875 0.17 0.30 2240D-025V34 B10
17,400 10,870 0.17 0.38 2244N-025V00 B26
18,560 N/A 0.25 0.53 2X90N-04V14 B111
20,290 N/A 0.75 1.30 2640N-12V32 B97
20,290 N/A 0.75 1.30 2640N-12V71 B97
20,300 N/A 0.40 0.77 2440N-06V91 B82
20,400 N/A 0.50 0.88 2440N-08V37 B83
20,400 N/A 0.50 0.88 2440N-08V91 B83
21,750 N/A 0.32 0.61 2440D-05V37 B80
23,200 15,000 0.40 0.85 2X90N-06V14 B114
23,780 N/A 0.25 0.50 2440N-04V37 B77
23,780 N/A 0.25 0.50 2440N-04V91 B77
26,090 N/A 0.50 0.97 2640N-08V32 B95
26,100 N/A 0.20 0.45 2440D-03V37 B73
31,900 N/A 0.16 0.41 2440D-025V37 B71
36,000 N/A 0.50 * 2840D-08V30 B110
36,230 N/A 0.20 0.51 2640D-03V32 B93
36,230 N/A 0.32 0.67 2740D-05V32 B107
44,000 N/A 0.32 0.79 2840D-05V32 B109
40,600 N/A 0.16 0.45 2640D-025V32 B91
40,600 N/A 0.20 0.52 2740D-03V30 B105
45,000 N/A 0.16 0.48 2740D-025V30 B103
48,000 N/A 0.20 0.57 2840D-03V34 B108
55,000 * N/A 0.20 1.00 2840D-03V34* B108

General Information

By Working Pressure 4:1
Working Working
Pressure Pressure I.D. O.D. A
4:1 2.5:1 inch inch Hose Number Page No.
3,987 6,380 0.76 1.12 2380F-12V07 B50
3,990 6,380 1.25 1.73 2244N-20V30 B30
3,990 6,380 1.00 1.34 2245N-16V30 B45
4,100 6,500 1.00 1.37 2390N-16V12 B69
4,100 6,500 1.00 1.37 2390N-16V13 B69
4,100 6,500 1.00 1.37 2390N-16V16 B69
4,350 6,960 0.75 1.13 2245N-12V30 B43
4,495 7,192 0.25 0.47 2040N-04V00 B6
4,710 7,540 0.50 0.81 2380F-08V07 B48
5,075 8,120 0.50 0.81 2245N-08V30 B41
5,437 8,700 0.32 0.56 2380F-05V07 B47
5,440 8,700 0.40 0.67 2245N-06V00 B39
5,575 8,100 0.81 1.14 2390N-12V03 B67
5,800 9,280 0.08 0.20 2020N-02V30 B4
5,800 9,280 0.31 0.56 2245N-05V00 B37
6,450 10,300 0.40 0.70 2390N-06V13 B63
6,500 10,400 0.50 0.81 2390N-08V12 B65
6,500 10,400 0.50 0.81 2390N-08V13 B65
6,500 10,400 0.50 0.81 2390N-08V16 B65
6,525 10,440 0.25 0.50 2245N-04V00 B33
6,525 10,440 0.25 0.50 2245N-04V02 B33
6,525 10,440 0.25 0.50 2245N-04V04 B33
6,890 11,020 0.08 0.20 2020N-012V30 B3
7,500 12,000 0.25 0.52 2390N-04V10 B60
7,500 12,000 0.25 0.52 2390N-04V12 B60
7,500 12,000 0.25 0.52 2390N-04V16 B60
7,970 12,760 0.50 0.89 2244N-08V10 B28
7,970 12,760 0.50 0.89 2244N-08V71 B28
8,150 13,040 0.32 0.52 2240D-05V32 B18
8,250 13,200 0.25 0.50 2380N-04V33 B55
8,500 13,600 0.32 0.62 2380N-05V00 B58
8,500 13,600 0.32 0.62 2380N-05V71 B58
8,750 14,000 0.25 0.50 2243D-04V70 B23
9,050 14,490 0.25 0.45 2240D-04V32 B15
9,970 15,950 0.12 0.28 2240D-02V32 B9
10,145 16,230 0.20 0.38 2240D-03V34 B13
10,150 16,240 0.17 0.36 2243D-025V70 B19

General Information

By Working Pressure 4:1 – continued
Working Working
Pressure Pressure I.D. O.D.
4:1 2.5:1 inch inch Hose Number Page No.
10,150 16,240 0.20 0.42 2243D-03V70 B20
10,150 16,240 0.20 0.42 2245D-03V32 B31
10,150 16,240 0.25 0.53 2380N-04V00 B52
10,150 16,240 0.25 0.53 2380N-04V02 B52
10,150 16,240 0.25 0.53 2380N-04V04 B52
10,150 16,240 0.25 0.53 2380N-04V71 B52
10,870 17,400 0.17 0.38 2244N-025V00 B26
10,875 17,400 0.17 0.30 2240D-025V34 B10
15,000 23,200 0.40 0.85 2X90N-06V14 B114
N/A 8,000 2.00 2.71 2440N-32V10 B89
N/A 10,000 2.00 2.80 2640N-24V80 B99
N/A 10,000 2.00 3.35 2640N-32V80 B99
N/A 13,050 1.00 1.46 2440N-16V37 B87
N/A 13,050 1.00 1.46 2440N-16V91 B87
N/A 14,500 0.81 1.19 2440N-12V37 B85
N/A 14,500 0.81 1.19 2440N-12V91 B85
N/A 15,080 0.50 0.91 2X90N-08V14 B115
N/A 18,560 0.25 0.53 2X90N-04V14 B111
N/A 20,290 0.75 1.30 2640N-12V32 B97
N/A 20,290 0.75 1.30 2640N-12V71 B97
N/A 20,300 0.40 0.77 2440N-06V91 B82
N/A 20,400 0.50 0.88 2440N-08V37 B83
N/A 20,400 0.50 0.88 2440N-08V91 B83
N/A 21,750 0.32 0.61 2440D-05V37 B80
N/A 23,780 0.25 0.50 2440N-04V37 B77
N/A 23,780 0.25 0.50 2440N-04V91 B77
N/A 26,090 0.50 0.97 2640N-08V32 B95
N/A 26,100 0.20 0.45 2440D-03V37 B73
N/A 31,900 0.16 0.37 2440D-025V37 B71
N/A 36,000 0.50 * 2840D-08V30 B110
N/A 36,230 0.20 0.51 2640D-03V32 B93
N/A 36,230 0.32 0.67 2740D-05V32 B107
N/A 44,000 0.32 0.79 2840D-05V32 B109
N/A 55,000* 0.32 1.40 2840D-05V32 B109
N/A 40,600 0.16 0.45 2640D-025V32 B91
N/A 40,600 0.20 0.52 2740D-03V30 B105
N/A 48,000 0.20 0.59 2840D-03V34 B108
N/A 55,000* 0.20 1.10 2840D-03V34* B108

General Information

By Inside Diameter
Working Working
I.D. I.D. Pressure Pressure O.D. Page A
inch mm 2.5:1 4:1 inch Hose Number No.
0.08 3 9,280 5,800 0.20 2020N-02V30 B4
0.08 2 11,020 6,890 0.20 2020N-012V30 B3
0.17 4 15,950 9,970 0.28 2240D-02V32 B9
0.17 4 31,900 N/A 0.37 2440D-025V37 B71
0.17 4 40,600 N/A 0.45 2640D-025V32 B91
0.17 4 45,000 N/A 0.48 2740D-025V30 B103
0.17 4 16,240 10,150 0.36 2243D-025V70 B19
0.17 5 17,400 10,875 0.30 2240D-025V34 B10
0.17 5 17,400 10,870 0.38 2244N-025V00 B26
0.20 5 16,230 10,145 0.38 2240D-03V34 B13
0.20 5 16,240 10,150 0.42 2243D-03V70 B20
0.20 5 16,240 10,150 0.42 2245D-03V32 B31
0.20 5 26,100 N/A 0.45 2440D-03V37 B73
0.20 5 36,230 N/A 0.51 2640D-03V32 B93
0.20 5 40,600 N/A 0.52 2740D-03V30 B105
0.20 5 48,000 N/A 0.57 2840D-03V34 B106
0.20 6 55,000* N/A 1.10 2840D-03V34* B108
0.25 6 7,192 4,495 0.47 2040N-04V00 B6
0.25 6 10,440 6,525 0.50 2245N-04V00 B33
0.25 6 10,440 6,525 0.50 2245N-04V02 B33
0.25 6 10,440 6,525 0.50 2245N-04V04 B33
0.25 6 12,000 7,500 0.52 2390N-04V10 B60
0.25 6 12,000 7,500 0.52 2390N-04V12 B60
0.25 6 12,000 7,500 0.52 2390N-04V16 B60
0.25 6 13,200 8,250 0.50 2380N-04V33 B55
0.25 6 14,000 8,750 0.50 2243D-04V70 B23
0.25 6 14,490 9,050 0.45 2240D-04V32 B15
0.25 6 16,240 10,150 0.53 2380N-04V00 B52
0.25 6 16,240 10,150 0.53 2380N-04V02 B52
0.25 6 16,240 10,150 0.53 2380N-04V04 B52
0.25 6 16,240 10,150 0.53 2380N-04V71 B52
0.25 6 18,560 N/A 0.53 2X90N-04V14 B109
0.25 6 23,780 N/A 0.50 2440N-04V37 B77
0.25 6 23,780 N/A 0.50 2440N-04V91 B77
0.31 8 9,280 5,800 0.56 2245N-05V00 B37
0.32 8 8,700 5,437 0.56 2380F-05V07 B47
0.17 4 13,040 8,150 0.52 2240D-05V32 B18

General Information

By Inside Diameter
Working Working
I.D. I.D. Pressure Pressure O.D. Page
inch mm 2.5:1 4:1 inch Hose Number No.
0.32 8 13,600 8,500 0.62 2380N-05V00 B58
0.32 8 13,600 8,500 0.62 2380N-05V71 B58
0.32 8 21,750 N/A 0.61 2440D-05V37 B80
0.32 8 36,230 N/A 0.67 2740D-05V32 B107
0.32 8 44,000 N/A 0.76 2840D-05V32 B109
0.40 10 8,700 5,440 0.67 2245N-06V00 B39
0.40 10 10,300 6,450 0.70 2390N-06V13 B63
0.40 10 23,200 15,000 0.85 2X90N-06V14 B114
0.40 10 20,300 N/A 0.77 2440N-06V91 B82
0.50 13 7,540 4,710 0.81 2380F-08V07 B48
0.50 13 8,120 5,075 0.81 2245N-08V30 B41
0.50 13 10,400 6,500 0.81 2390N-08V12 B65
0.50 13 10,400 6,500 0.81 2390N-08V13 B65
0.50 13 10,400 6,500 0.81 2390N-08V16 B65
0.50 13 12,760 7,970 0.89 2244N-08V10 B28
0.50 13 12,760 7,970 0.89 2244N-08V71 B28
0.50 13 15,080 N/A 0.91 2X90N-08V14 B115
0.50 13 20,400 N/A 0.88 2440N-08V37 B83
0.50 13 20,400 N/A 0.88 2440N-08V91 B83
0.50 13 26,090 N/A 0.97 2640N-08V32 B95
0.50 13 36,000 N/A * 2840D-08V30 B110
0.75 20 6,960 4,350 1.13 2245N-12V30 B43
0.75 20 20,290 N/A 1.30 2640N-12V32 B97
0.75 20 20,290 N/A 1.30 2640N-12V71 B97
0.76 20 6,380 3,987 1.12 2380F-12V07 B50
0.81 20 8,100 5,575 1.14 2390N-12V03 B67
0.81 20 14,500 N/A 1.19 2440N-12V37 B85
0.81 20 14,500 N/A 1.19 2440N-12V91 B85
1.00 25 6,380 3,990 1.34 2245N-16V30 B45
1.00 25 6,500 4,100 1.37 2390N-16V12 B69
1.00 25 6,500 4,100 1.37 2390N-16V13 B69
1.00 25 6,500 4,100 1.37 2390N-16V16 B69
1.00 25 13,050 N/A 1.46 2440N-16V37 B87
1.00 25 13,050 N/A 1.46 2440N-16V91 B87
1.25 32 6,380 3,990 1.73 2244N-20V30 B30
2.00 50 N/A 5,000 2.71 2440N-32V10 B89
2.00 50 10,000 5,000 2.80 2640N-24V80 B99
2.00 50 10,000 N/A 3.35 2640N-32V80 B101

General Information
Hose Fitting Chart

Fitting Fitting
Fitting Description Designation
A
National Pipe Tapered (NPT) Male Fitting 01
National Pipe Tapered(NPT) Female Fitting 02
JIC Female Swivel Fitting 06
Type “M” Female Swivel Fitting AY
BSP Female Swivel Fitting BC or 92
Metric Female Swivel Fitting C3 or C9
BSP Male Fitting D9 or 3B
Male Stecko Fitting MB
Tube Stub Fitting TU

General Information
Hose Fitting Chart

Fitting Fitting
Male Water Jetting Nozzle ZE or 3Z
Medium Pressure Female Swivel 5Y
Nozzle Nipple YH
High Pressure Female Swivel 6Y
Right Hand Male for Water Jetting Nozzle Fitting call polyflex
for update
Right Hand Female for Water Jetting Nozzle Fitting HY-RH
Left Hand Female for Water Jetting Nozzle Fitting HY-LH
2" Hammer Union (Male) Cone with Wing Nut HE

End Fitting
2" Hammer Union (Female) Cone Threaded End HN

with Seal

General Information
Hose Fitting Chart

Fitting Fitting
A
High Pressure Tube Nipple Y4 or YM
Medium Pressure Tube Nipple Y2

General Information
Hose Fitting Guide
Parflex
Style
Number 01 03 C3 C6 D9 92
NPTF SAE (JIC) 37° Metric Swivel Metric Swivel Male BSP Swivel
Dash Pipe Flare Female Female BSPP Female
Size Thread Size Thread Size Thread Size Thread Size Thread Size Thread Size
2 1/8-27 5/16-24 — — — —
3 — 3/8-24 — — — —
4 1/4-18 7/16-20 — — 1/4" 1/4"
5 — 1/2-20 — — — —
6 3/8-18 9/16-18 M12 x 1.5 — 3/8" 3/8"
8 1/2-14 3/4-16 M14 x 1.5 M16 x 1.5 1/2" 1/2"
10 — 7/8-14 M16 x 1.5 M18 x 1.5 — 5/8"
12 3/4-14 1 1/16-12 M18 x 1.5 M20 x 1.5 3/4" 3/4"
— — — — — — —
14 — 1 3/16-12 — M22 x 1.5 — —
15 — — M22 x 1.5 — — —
16 1-11 1/2 1 5/16-12 — M24 x 1.5 1" 1"
18 — — — — —
20 1 1/4-11 1/2 1 5/8-12 M26 x 1.5 — — —
22 — — — M30 x 2 — —
24 1 1/2-11 1/2 1 7/8-12 — — — —
25 — — M30 x 2 — — —
— — — — M36 x 2 — —
28 — — — — — —
30 — — M36 x 2 — — —
32 2-11 1/2 2 1/2-12 — M42 x 2 — —
33 — — — — — —

General Information
Hose Part Numbering System A
2440 N - 16 V37
Hose Core Hose I.D. Design

Type Material in 1/16" Variation
Hose End Fitting Part Numbering System
6 0 1 LX - 8 - 8 C
Mfg. Connection Hose Series Connection

Hose Size Material
Location Code Code Size

General Information
How to Order polyflex Hose Assemblies

Example Hose Assembly Number: 2244NAYAY111108C10-600
2244N AY AY 11 11 08 C 10 - XXX
(A) (B) (C) (D) (E) (F) Indicate Length
in Inches
A B C D F
This series These two letters will indicate This part will contain a
of numbers the STYLE of connection. dash followed by a one When This series of
will indicate End 1 & End 2 or two digit number specifying numbers will
the hose indicating the end hose size, indicate the hose
base number. 01 = NPT Pipe, Male, Rigid connection size. indicate the Variation Number.
02 = NPT Pipe; Female Rigid End 1 & End 2 two digit code.
Examples: 06 = JIC 37 degree.; Female Swivel
Examples:
07 = NPSM Pipe; Female Swivel UNF Hose
2040N - 02 60° 1 = 1/4" - 28 UNF Dash Code 2040N - 02 V00
2040N - 04 92 = BSP Pipe; Female Swivel 2 = 5/16" - 24 UNF
Size 2020N - 02 V30
AY = Type M; Female Swivel 58° 3 = 3/8" - 24 UNF
2240D - 025 YA = Type M; Male (adaptor ends) 4 = 7/16" - 20 UNF 01 01
2240D - 025 V34
2245D - 03 C9 = Metric; Female, Swivel 5 = 1/2" - 20 UNF 012 1A 2245N - 16 V30
2243D - 03 24/O-Ring 6 = 9/16" - 18 UNF
02 02 2245N - 20 V30
D9 = BSP; Male, Rigid 7 = 5/8" - 18 UNF
2244N - 025 V00
2390N - 04 Y1 = MP Nipple; Male, w/ GNut & 8 = 3/4" - UNF 025 2B 2244N - 08 V10
2390N - 06 Collar 9=
03 03
2390N - 08 Y2 = MP Nipple; Male, wo/ GNut & 10 = 7/8" - 14 UNF
04 04 2380N - 04 V33
2390N - 12 Collar 11 = 1" - 12 UNF
2380N - 04 V00
Y3 = HP Nipple; Male, w/ GNut & 12 = 1 1/16" - 12 UNF 05 05 2380N - 05 V00
2440D - 025 Collar 13 = 1 1/8" - 12 UNF
2440D - 05 Y4 = HP Nipple; Male, wo/ GNut & 14 = 06 06
2440N - 08 V37
2440N - 08 Collar 15 = 1 1/4" - 12 UNF 08 08
2440N - 12 V37
2440N - 12 Y5 = MP Flare; Male, Rigid 16 = 1 5/16" - 12 UNF 10 10 2440N - 16 V37
Y6 = HP Flare; Male, Rigid 17 = 1 3/8" - 12 UNF
12 12 2440N - 24 V80
2640N - 08 5Y = MP Flare; Female 18 =
2440N - 32 V80
2640N - 12 6Y = HP Flare; Female 19 = 1 1/2" - 12 UNF 16 16
20 = 1 5/8" - 12 UNF
20 20 2640D - 025 V32
2740D - 03
2640N - 12 V32
2740D - 05 24 24
NPT 2640N - 32 V80
32 32
2840D - 03 1 = 1/16-27
2 = 1/8-27 2740D - 03 V30
4 = 1/4-18 2740D - 05 V32
6 = 3/8-18
8 = 1/2-14 E 2840D - 03 V34
12 = 3/4-14
16 = 1-11 1/2 Indicate the
20 = 1 1/4-11 1/2 fitting material.
24 = 1 1/2-11 1/2
32 = 2-11 1/2 S = Steel
B = Brass
Medium and High C = Stainless
Pressure Tube Steel
Male or female, sized
by nominal tube O.D.
04 = 1/4" tube
06 = 3/8" tube
09 = 9/16" tube
12 = 3/4" tube
16 = 1" tube

General Information
Explanation of Symbols Used in

Hose and Fitting Tables
Symbol Definition Symbol Definition

A
Part Number Thickness
Hose I.D. Weight
Hose O.D. Thread Size
Working Pressure Hex Size
Minimum Diameter
Burst Pressure
Minimum Elongation
Bend Radius

General Information Notes

Hose and Fittings Table of Contents
Table of Contents – Section B
2000 Series
2020N-012 .......................................................................................... B3
2020N-02 ............................................................................................ B4
2040N-04 ............................................................................................ B6
2200 Series B
2240D-02 ............................................................................................ B9
2240D-025 ........................................................................................ B10
2240D-03 .......................................................................................... B13
2240D-04 .......................................................................................... B15
2240D-05 .......................................................................................... B18
2243D-025 ........................................................................................ B19
2243D-03 .......................................................................................... B20
2243D-04 .......................................................................................... B23
2244N-025 ........................................................................................ B26
2244N-08 .......................................................................................... B28
2244N-20 .......................................................................................... B30
2245D-03 .......................................................................................... B31
2245N-04 .......................................................................................... B33
2245N-05 .......................................................................................... B37
2245N-06 .......................................................................................... B39
2245N-08 .......................................................................................... B41
2245N-12 .......................................................................................... B43
2245N-16 .......................................................................................... B45
2300 Series
2380F-05 .......................................................................................... B47
2380F-08 .......................................................................................... B48
2380F-12 .......................................................................................... B50
2380N-04 .......................................................................................... B52
2380N-04 .......................................................................................... B55
2380N-05 .......................................................................................... B58
2390N-04 .......................................................................................... B60
2390N-06 .......................................................................................... B63
2390N-08 .......................................................................................... B65
2390N-12 .......................................................................................... B67
2390N-16 .......................................................................................... B69
(Continued)
Contact Parflex for current price and delivery information on shaded parts.
B1 Parker Hannifin Corporation

FluidConnectors
Hose and Fittings Table of Contents
Table of Contents – Section B (continued)
2400 Series
2440D-025 ........................................................................................ B71
2440D-03 .......................................................................................... B73
2440N-04 .......................................................................................... B77
2440D-05 .......................................................................................... B80
2440N-06 .......................................................................................... B82
2440N-08 .......................................................................................... B83
2440N-12 .......................................................................................... B85
2440N-16 .......................................................................................... B87
2440N-32 .......................................................................................... B89
2600 Series
2640D-025 ........................................................................................ B91
2640D-03 .......................................................................................... B93
2640N-08 .......................................................................................... B95
2640N-12 .......................................................................................... B97
2640N-24 .......................................................................................... B99
2640N-32 ........................................................................................ B101
2700 Series
2740D-025 ...................................................................................... B103
2740D-03 ........................................................................................ B105
2740D-05 ........................................................................................ B107
2800 Series
2840D-03 ........................................................................................ B108
2840D-05 ........................................................................................ B109
2840D-08 ........................................................................................ B110
2X00 Series
2X90N-04 ....................................................................................... B111
2X90N-06 ....................................................................................... B114
2X90N-08 ....................................................................................... B115
2X90N-12 ....................................................................................... B116
57CR Series
57CRN ............................................................................................ B118
HP Series
HP/HP8 .......................................................................................... B119
Twin Lines
2445N-04 ........................................................................................ B122
2380N-04 ........................................................................................ B125
Bundles ............................................................................................ B129

FluidConnectors
Hose and Fittings 2000 Series
2020N-012 polyflex Hose
Maximum Maximum
Working Working Minimum
Part Jacket Minimum Maximum Pressure with Pressure with Minimum Bend
Number Color I.D. O.D. 2.5:1 4:1 Burst Pressure Radius Weight B
inch mm inch mm psi MPa psi MPa psi MPa inch mm lbs/ft kg/m
2020N-012V30 Black 0.08 2 0.20 5 11,020 76.0 6,890 47.5 27,550 190.0 0.79 20 0.04 0.05
Construction: Polyamide core tube, high tensile synthetic Temperature Range: -40°F and +140°F (-40°C and +60°C).
fiber reinforced and a polyamide outer cover. Contact polyflex for temperatures outside this range.
Typical Applications: Small diameter, extremely flexible
hose. Replaces steel tubing in instrumentation, diagnostic,
hydraulic workholding, and testing applications.
A
National Pipe Tapered (NPT) Male Fitting B
01
Part Connection T ype A B H Maxim um

Num b er Thread Siz e O verall Length Cutoff Allo w an ce Hex Siz e Wo rking Pressure
inch mm in ch mm inch mm psi MPa

601EX-2-012 1/8" NPT 1.37 35 0.93 24 0.44 11 11,020 76.0
601EX-4-012 1/4" NPT 1.48 38 1.03 26 0.63 16 11,020 76.0
A
JIC Female Swivel Fitting B
06
Part Connection Type A B H Maxim um

Number Thread Siz e O verall Length Cutoff Allow ance Hex Siz e Working Pressure
inch mm inch mm inch mm psi MPa

106EX-4-012 7/16" - 20 1.24 31 0.79 20 0.59 15 10,000 69.0

FluidConnectors
Maximum Maximum
Number Color I.D. O.D. 2.5:1 4:1 Burst Pressure Radius Weight
2020N-02V30 Black 0.12 3 0.24 6 9,280 64.0 5,800 40.0 23,200 160.0 1.18 30 0.05 0.07
Construction: Polyamide core tube, high tensile synthetic Temperature Range: -40°F and +140°F (-40°C and +60°C).
fiber reinforced and a polyamide outer cover. Contact polyflex for temperatures outside this range.
Typical Applications: Small diameter, extremely flexible Available in bulk quantities with Field Attachable end fittings
hose. Replaces steel tubing in instrumentation, diagnostic or as factory made and tested assemblies.
mini-hydraulic systems, and testing applications.
National Pipe Tapered (NPT) Male Fitting

01 A A
B B
H
H
201RX Fitting
Part Connection Type A B H Maximum

Number Thread Size Overall Length Cutoff Allowance Hex Size Working Pressure

601EX-2-2 1/8" NPT 1.33 34 0.93 24 0.44 11 9,280 64.0
201RX-2-2C 1/8" NPT 1.54 39 1.10 28 0.44 11 9,280 64.0

FluidConnectors

A
06
B
Number Hose Size Thread Size Overall Length Cutoff Hex Size Working

206RX-4-2C 0.12 7/16" - 20 1.56 40 1.10 28 0.56 14 9,280 64.0
Tube Stub Fitting B

A
TU
ØR

Number Hose Size Thread Size Overall Length Cutoff Hex Size Working

2TURX-4-2C 0.12 1/4" TUBE 1.65 42 1.20 30 0.38 10 9,280 64.0

FluidConnectors
Maximum Maximum
2040N-04V00 Black 0.25 6 0.47 12 7,192 49.6 4,495 31.0 17,980 124.0 1.58 40 0.11 0.16
Construction: Polyamide core tube, one braided layer of Temperature Range: -40°F and +140°F (-40°C and +60°C).
high tensile steel wire and a polyurethane outer cover. Contact polyflex for temperatures outside this range.
Typical Applications: For use with petroleum or synthetic
hydraulic fluids and pressure testing equipment.
A
01


101PX-4-4 1/4" NPT 2.18 55 1.04 26 0.56 14 7,192 49.6
601NX-4-4C 1/4" NPT 2.38 60 1.12 28 0.63 16 7,192 49.6
A
Type “M” Female Swivel Fitting B
AY


6AYNX-6-4C 9/16" - 18 2.36 60 1.11 28 0.68 17 7,192 49.6

FluidConnectors
A
06

B
106PX-4-4 9/16" - 18 2.10 53 0.98 25 0.68 17 7,192 49.6
606NX-4-4C 7/16" - 20 2.23 57 0.99 25 0.63 16 7,192 49.6
606NX-6-4C 9/16" - 18 2.36 60 1.11 28 0.68 17 7,192 49.6
BSP Female Swivel Fitting B

A
BC


1BCPX-4-4 1/4" BSPP 2.00 51 0.88 22 0.66 17 7,192 49.6
A
Metric Female Swivel Fitting B
C3


1C3PX-8-4 M14 x 1.5 1.98 50 0.85 22 0.75 19 7,192 49.6

FluidConnectors
A
BSP Male Fitting B
D9


1D9PX-4-4 1/4" BSPP 2.26 57 1.23 31 0.75 19 7,192 49.6
A
Male Stecko Fitting B
MB
ØR
Part Connection Type A B R Maxim um

Number Thread Siz e O verall Length Cutoff Allow ance Diam eter Working Pressure

1MBPX-6-4 N/A 2.52 64 1.40 36 0.54 14 7,192 49.6

FluidConnectors
2240D-02 polyflex Hose
Maximum Maximum
B
2240D-02V32 Blue 0.12 3 0.28 7 15,950 110.0 9,969 68.8 39,875 275.0 2.36 60 0.047 0.07
Construction: Polyoxymethylene core tube, high strength Temperature Range: -40°F and +140°F (-40°C and +60°C).
wire reinforced and a polyamide cover. Contact for temperatures outside this range.
Typical Applications: Small diameter flexible hose, ideal
for tight routing applications such as high pressure heat
exchanger tube cleaning in petrochemical and power plants.
A
01
ØR
*ProLance® fitting


601PL-1-2 * 1/16" NPT 1.06 27 0.47 12 0.38 10 15,000 103.4
*ProLance® fitting
A
Female Water Jetting Nozzle Fitting B
HY
ØR
*ProLance® Fitting


6HYPL-1-2 * #12 - 28 1.13 29 0.53 13 0.38 10 15,000 103.4
*ProLance® fitting

FluidConnectors
Maximum Maximum
2240D-025V34 Red 0.17 4 0.30 8 17,400 120.0 10,875 75.0 43,500 300.0 2.95 75 0.067 0.10
wire reinforced and a polyamide cover. Contact for temperatures outside this range.
A
01
ØR
*ProLance® Fitting
Part Connection T ype A B R Maxim um

Num b er Thread Siz e O verall Length Cutoff Allo w an ce Diam eter Wo rking Pressure

601AX-1-2A * 1/16" NPT 1.20 30 0.57 14 0.44 11 15,000 103.4
601AX-2-2A * 1/8" NPT 1.10 28 0.47 12 0.44 11 15,000 103.4
*ProLance® Fitting

FluidConnectors
A
National Pipe Tapered (NPT) Female Fitting B
02
ØR
*ProLance® Fitting

B
602AX-1-2A * 1/16" NPT 1.50 38 0.86 22 0.44 11 15,000 103.4
*ProLance® Fitting
A
AY


6AYAX-6-2A 9/16" - 18 1.52 39 0.86 22 0.75 19 17,400 120.0
A
06
H
*ProLance® Fitting


606AX-4-2A * 7/16" - 20 1.53 39 0.88 22 0.63 16 10,000 69.0
*ProLance® Fitting

FluidConnectors
A
Male Water Blast Nozzle Fitting B
3Z and ZE
ØR
*ProLance® Fitting


63ZAX-5-2A * 5/16" - 32 1.10 28 0.44 11 0.44 11 15,000 103.4
6ZEAX-5-2A * 5/16" - 24 1.31 33 0.69 18 0.44 11 15,000 103.4
*ProLance® Fitting
A
EZ
ØR
*ProLance® Fitting
Part C o n n ectio n T yp e A B R M axim u m

N u m b er T h read Siz e O verall L en g th C u to ff A llo w an ce Diam eter Wo rkin g Pressu re
in ch mm in ch mm in ch mm p si MPa
6EZ A X-5-2A * 5/16" - 24 1.50 38 0.90 23 0.44 11 15,000 103.4
6EZ A X-1-2A * #12 - 28 1.28 33 0.66 17 0.44 11 15,000 103.4
*ProLance® Fitting

FluidConnectors
Maximum Maximum
B
2240D-03V34 Red 0.20 5 0.38 10 16,230 111.9 10,145 70.0 40,580 279.9 3.75 95 0.134 0.20
wire reinforced and a polyamide cover. Contact polyflex for temperatures outside this range.

A A
01 B B
ØR
H
*ProLance® Fitting
Part Connection T ype A B H Hex Size/ Maxim um

Num b er Thread Siz e O verall Length Cutoff Allo w an ce R Diam eter Wo rking Pressure

601AX-2-3 * 1/8" NPT 1.28 33 0.50 13 0.52 13 15,000 103.4
601LX-4-3 1/4" NPT 2.86 73 1.30 33 0.56 14 15,000 103.4
*ProLance® Fitting
A
02
ØR
*ProLance® Fitting

602AX-2-3 * 1/8" NPT 1.64 42 0.84 21 0.52 13 15,000 103.4
*ProLance® Fitting

FluidConnectors
A
AY
H
*ProLance® Fitting


6AYAX-6-3 * 9/16" - 18 1.77 45 0.94 24 0.75 19 16,230 111.9
6AYLX-6-3 9/16" - 18 2.80 71 1.28 33 0.75 19 16,230 111.9
*ProLance Fitting
A
06
H
*ProLance® Fitting


606AX-4-3C * 7/16" - 20 1.84 47 0.86 22 0.56 14 10,000 69.0
*ProLance® Fitting
A
Male Water Jetting Nozzle Fitting B
3Z
ØR
*ProLance® Fitting


63ZAX-5-3 * 5/16" - 32 1.31 33 0.50 13 0.52 13 15,000 103.4
63ZAX-5-3C 5/16" - 32 1.35 34 0.37 9 0.56 14 15,000 103.4
*ProLance® Fitting

FluidConnectors
Maximum Maximum
B
2240D-04V32 Blue 0.25 6 0.45 11 14,490 99.9 9,050 62.4 36,230 249.9 4.33 110 0.175 0.26

01 B
A
B
A
ØR
H
*ProLance® Fitting


101NX-4-4 1/4" NPT 2.57 65 1.35 34 0.63 16 14,490 99.9
101NX-6-4 3/8" NPT 2.63 67 1.38 35 0.75 19 14,490 99.9
601NX-2-4 * 1/8" NPT 1.44 37 0.50 13 0.62 16 14,490 99.9
601NX-4-4 * 1/4" NPT 1.56 40 0.63 16 0.62 16 14,490 99.9
601NX-4-4C 1/4" NPT 2.38 60 1.12 28 0.63 16 14,490 99.9
*ProLance® Fitting

FluidConnectors
A
02
ØR
*ProLance® Fitting


602NX-4-4 * 1/4" NPT 2.38 60 1.12 28 0.63 16 14,490 99.9
*ProLance® Fitting
A
AY


6AYNX-6-4 9/16" - 18 2.56 65 1.32 34 0.75 19 14,490 99.9
6AYNX-6-4C 9/16" - 18 2.36 60 1.11 28 0.68 17 14,490 99.9
A
06


106NX-4-4 7/16" - 20 2.56 65 1.37 35 0.75 19 10,000 69.0
106NX-6-4 9/16" - 18 2.56 65 1.32 34 0.75 19 10,000 69.0
606NX-4-4C 7/16" - 20 2.23 57 0.99 25 0.63 16 10,000 69.0
606NX-6-4C 9/16" - 18 2.36 60 1.11 28 0.68 17 10,000 69.0

FluidConnectors

A
BC

B
1BCNX-4-4 1/4" BSPP 2.50 64 1.25 32 0.75 19 14,490 99.9
A
BSP Male Fitting B
D9


1D9NX-4-4 1/4" BSPP 2.64 67 1.40 36 0.75 19 14,490 99.9
A
B
Male Water Jetting Nozzle Fitting
3Z ØR
*ProLance® Fitting


63ZNX-5-4C * 5/16" - 32 2.79 71 0.45 11 0.67 17 14,490 99.9
*ProLance® Fitting

FluidConnectors
Maximum Maximum
Part Jacket Minimum Maximum Pressure w ith Pressure with Minimum Bend
Number Color I.D. O .D. 2.5:1 4:1 Burst Pressure Radius Weight
2240D-05V32 Blue 0.32 8 0.52 13 13,040 89.9 8,150 56.2 32,610 224.9 4.72 120 0.17 0.25
Typical Applications: High flow, flexible hose, ideal for high
pressure heat exchanger tube cleaning in petrochemical and
power plants.

A
01 B
ØR
*ProLance® Fitting
Part Connection Type A B H Hex Size/ Maxim um

Number Thread Siz e O verall Length Cutoff Allow ance R Diam eter Working Pressure

601AX-6-5 * 3/8" NPT 1.70 43 1.02 26 0.69 18 13,040 89.9
*ProLance® Fitting

FluidConnectors

Maximum Maximum
B
2243D-025V70 SS Braid 0.17 4 0.36 9 16,240 112.0 10,150 70.0 40,600 280.0 4.00 102 0.15 0.22
wire reinforced and a polyamide cover with a stainless steel Contact polyflex for temperatures outside this range.
outer braid.
Stainless steel outer braid improves abrasion and cut
resistance.
A
01
ØR
*ProLance® Fitting


601VX-2-2A * 1/8" NPT 1.10 28 0.44 11 0.47 12 15,000 103.4
*ProLance® Fitting

FluidConnectors
Maximum Maximum
2243D-03V70 SS Braid 0.20 5 0.42 11 16,240 112.0 10,150 70.0 40,600 280.0 4.50 114 0.14 0.21
outer braid.
resistance.

01 B
A
B
A
ØR
H
*ProLance® Fitting


601AX-2-3 * 1/8" NPT 1.28 33 0.50 13 0.52 13 15,000 103.4
601LX-4-3 1/4" NPT 2.86 73 1.30 33 0.56 14 15,000 103.4
*ProLance® Fitting

FluidConnectors
A
02
ØR
*ProLance® Fitting

B
602AX-2-3 * 1/8" NPT 1.64 42 0.84 21 0.52 13 15,000 103.4
*ProLance® Fitting
A
AY
H
*ProLance® Fitting


6AYAX-6-3 * 9/16" - 18 1.77 45 0.94 24 0.75 19 16,240 112.0
6AYLX-6-3 9/16" - 18 2.80 71 1.28 33 0.75 19 16,240 112.0
*ProLance® Fitting

FluidConnectors
A
06


606AX-4-3C * 7/16" - 20 1.84 47 0.86 22 0.56 14 10,000 69.0
*ProLance® fitting
A
B
3Z ØR
*ProLance® Fitting


63ZAX-5-3 * 5/16" - 32 1.31 33 0.50 13 0.52 13 15,000 103.4
63ZAX-5-3C 5/16" - 32 1.35 34 0.37 9 0.56 14 15,000 103.4
*ProLance® Fitting

FluidConnectors

Maximum Maximum
B
2243D-04V70 SS Braid 0.25 6 0.50 13 14,000 96.6 8,750 60.3 35,000 241.4 5.00 127 0.20 0.30
outer braid.
resistance.

01 B
A A
B
ØR
H
*ProLance® Fitting
Part Connection Type A B H Hex Size/ Maxim um

Number Thread Siz e O verall Length Cutoff Allow ance R Diam eter Working Pressure

101NX-4-4 1/4" NPT 2.57 65 1.35 34 0.63 16 14,000 96.6
101NX-6-4 3/8" NPT 2.63 67 1.38 35 0.75 19 14,000 96.6
601NX-2-4 * 1/8" NPT 1.44 37 0.50 13 0.62 16 14,000 96.6
601NX-4-4 * 1/4" NPT 1.56 40 0.63 16 0.62 16 14,000 96.6
601NX-4-4C 1/4" NPT 2.38 60 1.12 28 0.63 16 14,000 96.6
*ProLance® Fitting

FluidConnectors
A
02
ØR
*ProLance® Fitting


602NX-4-4 * 1/4" NPT 1.89 48 0.95 24 0.75 19 10,000 69.0
*ProLance® Fitting
A
AY


6AYNX-6-4C 9/16" - 18 2.36 60 1.11 28 0.68 17 14,000 96.6
6AYNX-6-4 9/16" - 18 2.56 65 1.32 34 0.75 19 14,000 96.6
A
06


106NX-4-4 7/16" - 20 2.56 65 1.37 35 0.75 19 10,000 69.0
106NX-6-4 9/16" - 18 2.56 65 1.32 34 0.75 19 10,000 69.0
606NX-4-4C 7/16" - 20 2.23 57 0.99 25 0.63 16 10,000 69.0
606NX-6-4C 9/16" - 18 2.36 60 1.11 28 0.68 17 10,000 69.0

FluidConnectors

A
BC

B
1BCLX-4-4 1/4" BSPP 2.50 64 1.25 32 0.75 19 14,000 96.6
A
BSP Male Fitting B
D9


1D9LX-4-4 1/4" BSPP 2.64 67 1.40 36 0.75 19 14,000 96.6
A
B

3Z ØR
*ProLance® Fitting

63ZNX-5-4C 5/16" - 32 2.79 71 0.45 11 0.67 17 14,000 96.6
*ProLance® Fitting

FluidConnectors
Maximum Maximum
2244N-025V00 Black 0.17 4 0.38 10 17,400 120.0 10,870 75.0 43,500 300.0 2.17 55 0.13 0.19
Construction: Polyamide core tube, high strength wire Temperature Range: -40°F and +140°F (-40°C and +60°C).
reinforced and a polyurethane outer cover. Contact polyflex for temperatures outside this range.
Typical Applications: Small diameter, low volumetric
expansion hose. Ideal for pressure testing, portable
hydraulic tools that require extreme kink resistance and
maximum flexibility. Available in long single lengths and in
Twin-Line construction.
A
01


6018X-2-2A 1/8" NPT 1.86 47 0.76 19 0.63 16 15,000 103.4
6018X-2-2AC 1/8" NPT 2.18 55 1.80 46 0.50 13 15,000 103.4
6018X-4-2AC 1/4" NPT 2.44 62 1.35 34 0.62 16 15,000 103.4

FluidConnectors
A
AY

B
1AY8X-6-2A 9/16" - 18 2.19 56 1.12 28 0.75 19 10,870 75.0
6AY8X-6-2AC 9/16" - 18 2.32 59 1.24 31 0.68 17 17,400 120.0
A
06


6068X-4-2AC 7/16" - 20 2.17 55 1.05 27 0.56 14 10,000 69.0

FluidConnectors
Maximum Maximum
2244N-08V10 Black 0.50 13 0.89 23 12,760 88.0 7,970 55.0 31,900 220.0 5.90 150 0.54 0.80
2244N-08V71 Black 0.50 13 0.89 23 12,760 88.0 7,970 55.0 31,900 220.0 5.90 150 0.54 0.80
Typical Applications: Flexible, lightweight, chemical
resistant alternative to steel pipe and rubber hose for
applications such as waterblasting, gas transfer, chemical
injection, wireline logging services, and pressure testing.
The -08V71 is typically used in Methanol injection
applications.
A
01


6018X-8-8C 1/2" NPT 3.46 88 1.67 42 1.00 25 12,760 88.0
601LX-8-8 1/2" NPT 3.75 95 1.68 43 1.25 32 12,760 88.0
BSPP Male ProLance Fitting
*ProLance® Fitting
Part Connection Type A B R Maximum

Number Thread Size Overall Length Cutoff Allowance Diameter Working Pressure

6D9NX-8-8-PL * 1/2" BSPP 2.50 64 1.00 25 1.26 32 10,000 69.0
*ProLance® Fitting

FluidConnectors
A
AY

B
6AY8X-11-8C 1" - 12 3.27 83 1.49 38 1.25 32 12,760 88.0
6AYLX-11-8C 1" - 12 3.53 90 1.50 38 1.25 32 12,760 88.0
6AYLX-11-8C-SD * 1" - 12 3.53 90 1.50 38 1.25 32 12,760 88.0
*SD – Corrosion resistant (sea water)
A
06


6068X-8-8C 3/4" - 16 3.10 79 1.30 33 0.87 22 10,000 69.0
A
C9


6C9L X-16-8C M24 x 1.5 3.48 88 1.44 37 1.26 32 12,760 88.0

FluidConnectors
Maxim um Maxim um
Working Working Minim um
Part Jacket Minim um Maxim um Pressure w ith Pressure w ith Minim um Bend
Num ber Color I.D. O .D. 2.5:1 4:1 Burst Pressure Radius Weight
2244N-20V30 Black 1.25 32 1.73 44 6,380 44.0 3,990 27.5 15,950 110.0 15.75 400 1.23 1.83
reinforced and a polyamide outer cover. Contact polyflex for temperatures outside this range.
Typical Applications: Lightweight, chemical resistant hose
used to replace steel pipe and rubber hose for hydraulic test
systems using Skydrol fluids and gas transfer services.
A
06


106NX-20-20 1-5/8" - 12 4.10 104 1.73 44 1.97 50 6,380 44.0

FluidConnectors
Maximum Maximum
Part Jacket Minimum Maximum Pressure w ith Pressure with Minimum Bend
B
2245D-03V32 Blue 0.20 5 0.42 11 16,240 112.0 10,150 70.0 40,600 280.0 3.50 89 0.13 0.19
wire reinforced and a polyamide outer cover. Contact polyflex for temperatures outside this range.

01 B
A A
B
ØR
H
*ProLance® fitting

601AX-2-3 * 1/8" NPT 1.28 33 0.50 13 0.52 13 15,000 103.4
601LX-4-3 1/4" NPT 2.86 73 1.30 33 0.56 14 15,000 103.4
*ProLance® Fitting
A
02
ØR
*ProLance® Fitting

602AX-2-3 * 1/8" NPT 1.64 42 0.84 21 0.52 13 15,000 103.4
*ProLance® Fitting

FluidConnectors
A
AY
H
*ProLance® Fitting


6AYAX-6-3 * 9/16" - 18 1.77 45 0.94 24 0.75 19 16,240 112.0
6AYLX-6-3 9/16" - 18 2.80 71 1.28 33 0.75 19 16,240 112.0
*ProLance® Fitting
A
06
H
*ProLance® Fitting
Part C o n n ectio n T yp e A B H M axim u m

N u m b er T h read Siz e O verall L en g th C u to ff A llo w an ce H ex Siz e Wo rkin g Pressu re
606AX-4-3C * 7/16" - 20 1.84 47 0.86 22 0.56 14 10,000 69.0
*ProLance® Fitting
A
3Z
ØR
*ProLance® Fitting


63ZAX-5-3 * 5/16" - 32 1.31 33 0.50 13 0.52 13 15,000 103.4
63ZAX-5-3C 5/16" - 32 1.35 34 0.37 9 0.56 14 15,000 103.4
*ProLance® Fitting

FluidConnectors
Maximum Maximum
B
2245N-04V00 Black 0.25 6 0.50 13 10,440 72.0 6,525 45.0 26,100 180.0 2.76 70 0.17 0.25
2245N-04V02 Blue 0.25 6 0.50 13 10,440 72.0 6,525 45.0 26,100 180.0 2.76 70 0.17 0.25
2245N-04V04 Red 0.25 6 0.50 13 10,440 72.0 6,525 45.0 26,100 180.0 2.76 70 0.17 0.25
hydraulic tools and hydraulic controls.

01 A A
B B
ØR
H
*ProLance® Fitting


101NX-4-4 1/4" NPT 2.57 65 1.35 34 0.63 16 10,440 72.0
101NX-6-4 3/8" NPT 2.63 67 1.38 35 0.75 19 10,440 72.0
601NX-2-4 * 1/8" NPT 1.44 37 0.50 13 0.62 16 10,440 72.0
601NX-4-4 * 1/4" NPT 1.56 40 0.63 16 0.62 16 10,440 72.0
601NX-4-4C 1/4" NPT 2.38 60 1.12 28 0.63 16 10,440 72.0
*ProLance® Fitting

FluidConnectors
A
02
ØR
*ProLance® Fitting


602NX-4-4 * 1/4" NPT 1.89 48 0.95 24 0.75 19 10,000 69.0
*ProLance® Fitting
A
AY


6AYNX-6-4 9/16" - 18 2.56 65 1.32 34 0.75 19 10,440 72.0
6AYNX-6-4C 9/16" - 18 2.36 60 1.11 28 0.68 17 10,440 72.0
A
06


106NX-4-4 7/16" - 20 2.56 65 1.37 35 0.75 19 10,000 69.0
106NX-6-4 9/16" - 18 2.56 65 1.32 34 0.75 19 10,000 69.0
606NX-4-4C 7/16" - 20 2.23 57 0.99 25 0.63 16 10,000 69.0
606NX-6-4C 9/16" - 18 2.36 60 1.11 28 0.68 17 10,000 69.0

FluidConnectors

A
BC

B
1BCNX-4-4 1/4" BSPP 2.50 64 1.25 32 0.75 19 10,440 72.0
A
BSP Male Fitting B
D9


1D9NX-4-4 1/4" BSPP 2.64 67 1.40 36 0.75 19 10,440 72.0
A
C3


1C3NX-8-4 M14 x 1.5 2.45 62 1.20 30 0.75 19 10,440 72.0

FluidConnectors
A
3Z
ØR
*ProLance® Fitting


63ZNX-5-4C * 5/16" - 32 2.79 71 0.45 11 0.67 17 10,440 72.0
*ProLance® Fitting

FluidConnectors
Maximum Maximum
B
2245N-05V00 Black 0.31 8 0.56 14 9,280 64.0 5,800 40.0 23,200 160.0 3.94 100 0.22 0.33
Typical Applications: Low volumetric expansion hose for
use with petroleum or synthetic hydraulic fluids, and in long
lengths for waterblasting, pipe cleaning and line moleing
applications.
A
01


101NX-6-05 3/8" NPT 2.52 64 1.18 30 0.75 19 9,280 64.0
A
06


106NX-6-05 9/16" - 18 2.38 60 1.03 26 0.75 19 9,280 64.0

FluidConnectors

A
92


192NX-6-05 3/8" BSPP 2.50 64 1.21 31 0.87 22 9,280 64.0
A
BSP Male Fitting B
3B


13BNX-6-05 3/8" BSPP 2.50 64 1.16 29 0.87 22 9,280 64.0
A
C9


1C9NX-12-05 M20 x 1.5 2.48 63 1.14 29 0.95 24 9,280 64.0

FluidConnectors
Maximum Maximum
B
2245N-06V30 Black 0.40 10 0.67 17 8,700 60.0 5,440 37.5 21,750 150.0 4.73 120 0.28 0.42
applications.
A
01


101NX-6-06 3/8" NPT 2.79 71 1.20 30 0.87 22 8,700 60.0
101NX-8-06 1/2" NPT 3.00 76 1.40 36 0.95 24 8,700 60.0
A
06


106NX-6-06 9/16" - 18 2.68 68 1.09 28 0.87 22 8,700 60.0
106NX-8-06 3/4" - 16 2.82 72 1.23 31 0.95 24 8,700 60.0

FluidConnectors

A
92


192NX-6-06 3/8" BSPP 2.70 69 1.11 28 0.87 22 8,700 60.0
192NX-8-06 1/2" BSPP 2.86 73 1.27 32 1.06 27 8,700 60.0
A
BSP Male Fitting B
3B


13BNX-6-06 3/8" BSPP 2.78 71 1.18 30 0.87 22 8,700 60.0
13BNX-8-06 1/2" BSPP 2.97 75 1.38 35 0.87 22 8,700 60.0
A
C9


1C9NX-14-06 M22 x 1.5 2.78 71 0.93 24 1.062 27 8,700 60.0

FluidConnectors
Maximum Maximum
B
2245N-08V30 Black 0.50 13 0.81 21 8,120 56.0 5,075 35.0 20,300 140.0 5.50 140 0.35 0.52
systems using Skydrol®* fluids and gas transfer services.
A
01


6019X-8-8C 1/2" NPT 3.37 86 1.68 43 1.00 25 8,120 56.0
6019X-8-8 1/2" NPT 3.35 85 1.43 36 0.87 22 8,120 56.0
*Skydrol® is a registered trademark of Solutia, Inc.

FluidConnectors
A
AY


6AY9X-11-8C 1" - 12 3.20 81 1.50 38 1.25 32 8,120 56.0
A
06


6069X-8-8C 3/4" - 16 3.00 76 1.30 33 0.87 22 8,120 56.0

FluidConnectors
Maximum Maximum
B
2245N-12V30 Black 0.75 19 1.13 29 6,960 48.0 4,350 30.0 17,400 120.0 9.45 240 0.62 0.92
systems using synthetic and phosphate ester fluids, such as
Skydrol®* fluids and gas transfer service.
A
01


6019X-12-12 3/4" NPT 3.88 99 1.58 40 1.07 27 6,960 48.0
1019X-16-12 1" NPT 4.10 104 1.78 45 1.42 36 6,960 48.0
Contact Technical Services for specific application information.


FluidConnectors

A
AY


6AYLX-16-12C 1-5/16" - 12 4.15 105 1.52 39 1.50 38 6,960 48.0
A
06


1069X-12-12 1-1/16" - 12 4.00 102 1.69 43 1.42 36 6,960 48.0
1069X-16-12 1-5/16" - 12 3.93 100 1.57 40 1.62 41 6,960 48.0
606LX-16-12C 1-5/16" - 12 4.29 109 1.68 43 1.50 38 6,960 48.0

FluidConnectors
Maximum Maximum
B
2245N-16V30 Black 1.00 25 1.34 34 6,380 44.0 3,990 27.5 15,950 110.0 11.02 280 0.78 1.16
systems using synthetic and phosphate ester fluids, such as
Skydrol®* fluids and gas transfer service.
A
01


1019X-16-16 1" NPT 4.10 104 1.78 45 1.42 36 6,380 44.0
6019X-16-16C 1" NPT 4.38 111 2.25 57 1.38 35 6,380 44.0


FluidConnectors
A
AY


6AY9X-16-16C 1-5/16" - 12 3.79 96 1.65 42 1.50 38 6,380 44.0
A
06


6069X-16-16C 1-5/16" - 12 3.79 96 1.65 42 1.50 38 6,380 44.0
1069X-16-16 1-5/16" - 12 4.04 103 1.76 45 1.62 41 6,380 44.0

FluidConnectors
2380F-05 polyflex Hose
Maximum Maximum
B
2380F-05V07 Gray 0.32 8 0.56 14 8,700 60.0 5,437 37.5 21,750 150.0 3.35 85 0.24 0.36
Construction: Fluorinatedethylene-propylene polymer core Temperature Range: -40°F and +140°F (-40°C and +60°C).
tube, high strength wire reinforced and a polyurethane outer Contact polyflex for temperatures outside this range.
cover. Temperatures higher than 140°F are possible. Contact
division for additional information.
Typical Applications: FEP inner core offers exceptional
chemical resistance for applications with aggressive fluids.
A
01


101NX-6-5 3/8" NPT 2.52 64 1.18 30 0.75 19 8,700 60.0
A
06


106NX-6-05 9/16" - 18 2.38 60 1.03 26 0.75 19 8,700 60.0

FluidConnectors
Maximum Maximum
2380F-08V07 Gray 0.50 13 0.81 21 7,540 52.0 4,710 32.5 18,850 130.0 5.51 140 0.39 0.58
A
01


6019X-8-8C 1/2" NPT 3.37 86 1.68 43 1.00 25 7,540 52.0
1019X-8-8 1/2" NPT 3.35 85 1.43 36 0.87 22 7,540 52.0

FluidConnectors
A
AY

B
6AY9X-11-8C 1" - 12 3.20 81 1.50 38 1.25 32 7,540 52.0
A
06


6069X-8-8C 3/4" - 16 3.00 76 1.30 33 0.87 22 7,540 52.0

FluidConnectors
Maximum Maximum
2380F-12V07 Gray 0.76 19 1.12 28 6,380 44.0 3,987 27.5 15,950 110.0 8.07 205 0.65 0.97
A
01


1019X-12-12 3/4" NPT 3.88 99 1.58 40 1.07 27 6,380 44.0
1019X-16-12 1" NPT 4.10 104 1.78 45 1.42 36 6,380 44.0

FluidConnectors

A
AY

B
6AYLX-16-12C 1-5/16" - 12 4.15 105 1.52 39 1.50 38 6,380 44.0
A
06


1069X-12-12 1-1/16" - 12 4.00 102 1.69 43 1.42 36 6,380 44.0
1069X-16-12 1-5/16" - 12 3.93 100 1.57 40 1.62 41 6,380 44.0
606LX-16-12C 1-5/16" - 12 4.29 109 1.68 43 1.50 38 6,380 44.0

FluidConnectors
Maximum Maximum
2380N-04V00 Black 0.25 6 0.53 13 16,240 112.0 10,150 70.0 40,600 280.0 2.76 70 0.22 0.33
2380N-04V02 Blue 0.25 6 0.53 13 16,240 112.0 10,150 70.0 40,600 280.0 2.76 70 0.22 0.33
2380N-04V04 Red 0.25 6 0.53 13 16,240 112.0 10,150 70.0 40,600 280.0 2.76 70 0.22 0.33
2380N-04V71 Black 0.25 6 0.53 13 16,240 112.0 10,150 70.0 40,600 280.0 2.76 70 0.22 0.33
reinforced and a polyurethane cover. Contact polyflex for temperatures outside this range.
hydraulic tools that require extreme kink resistance and
maximum flexibility. Available in long single lengths and in
Twin-Line construction. The -04V71 is typically used in
Methanol injection applications.
A
01
H

1018X-6-4 3/8" NPT 2.72 69 1.47 37 0.75 19 15,000 103.4
6018X-4-4 1/4" NPT 2.62 67 1.37 35 0.63 16 15,000 103.4
601LX-4-4C 1/4" NPT 2.62 67 1.37 35 0.63 16 15,000 103.4
A
AY


6AY8X-6-4 9/16" - 18 2.54 65 1.30 33 0.75 19 16,240 112.0
6AYLX-6-4C 9/16" - 18 2.69 68 1.39 35 0.68 17 16,240 112.0
6AYLX-6-4C-SD * 9/16" - 18 2.54 65 1.30 33 0.75 19 16,240 112.0

FluidConnectors
A
06
H
Number Thread Size O verall Length Cutoff Allow ance Hex Size Working Pressure
B
1068X-4-4 7/16" - 20 2.64 67 1.37 35 0.75 19 10,000 69.0
1068X-6-4 9/16" - 18 2.58 66 1.30 33 0.75 19 10,000 69.0
6069X-4-4C 7/16" - 20 2.24 57 0.98 25 0.63 16 10,000 69.0
6069X-6-4C 9/16" - 18 2.36 60 1.10 28 0.68 17 10,000 69.0
A
Medium Pressure Female Swivel Fitting B
5Y


65Y8X-6-4 9/16" - 18 2.78 71 1.55 39 0.75 19 16,240 112.0
65YLX-6-4C 9/16" - 18 2.84 72 1.54 39 0.75 19 16,240 112.0

A
92

Num b er Thread Siz e O verall Length Cutoff Allo w an ce Hex Siz e Working Pressure

6928X-4-4 1/4" BSPP 2.51 64 1.27 32 0.75 19 16,240 112.0

FluidConnectors
BSP Male Fitting B

A
D9


1D98X-4-4 1/4" BSPP 2.65 67 1.39 35 0.75 19 16,240 112.0
A
MB
ØR


1MB8X-6-4 None 2.85 72 1.58 40 0.86 22 10,000 69.0

A
C3


1C38X-4-4 M14 x 1.5 2.45 62 1.20 30 0.75 19 16,240 112.0

FluidConnectors
Maximum Maximum
B
2380N-04V33 Green 0.25 6 0.50 13 13,200 91.0 8,250 56.9 33,000 227.6 3.50 89 0.17 0.25
Typical Applications: Replaces high pressure metal tubing
in applications where vibration or routing constraints are
issues, such as high pressure gas transfer, pressure
testing, hydraulic controls, and hydraulic test systems using
synthetic and phosphate ester fluids, such as Skydrol®**
and gas transfer service. Also used with ProLance fittings
for high pressure heat exchanger tube cleaning in petro-
chemical and power plants.

A A
B B
ØR
H
*ProLance® Fitting


101NX-4-4 1/4" NPT 2.57 65 1.35 34 0.63 16 13,200 91.0
101NX-6-4 3/8" NPT 2.63 67 1.38 35 0.75 19 13,200 91.0
601NX-2-4 * 1/8" NPT 1.44 37 0.50 13 0.62 16 13,200 91.0
601NX-4-4 * 1/4" NPT 1.56 40 0.63 16 0.62 16 13,200 91.0
601NX-4-4C 1/4" NPT 2.38 60 1.12 28 0.63 16 13,200 91.0
*ProLance® Fitting

**Skydrol® is a registered trademark of Solutia, Inc.

FluidConnectors
A
02
ØR
*ProLance® Fitting


602NX-4-4 * 1/4" NPT 1.89 48 0.95 24 0.75 19 13,200 91.0
*ProLance® Fitting
A
AY


6AYNX-6-4 9/16" - 18 2.56 65 1.32 34 0.75 19 13,200 91.0
6AYNX-6-4C 9/16" - 18 2.36 60 1.11 28 0.68 17 13,200 91.0
A
06


106NX-4-4 7/16" - 20 2.56 65 1.37 35 0.75 19 10,000 69.0
106NX-6-4 9/16" - 18 2.56 65 1.32 34 0.75 19 10,000 69.0
606NX-4-4C 7/16" - 20 2.23 57 0.99 25 0.63 16 10,000 69.0
606NX-6-4C 9/16" - 18 2.36 60 1.11 28 0.68 17 10,000 69.0

FluidConnectors

A
BC

B
1BCNX-4-4 1/4" BSPP 2.50 64 1.25 32 0.75 19 13,200 91.0
A
BSP Male Fitting B
D9


1D9NX-4-4 1/4" BSPP 2.64 67 1.40 36 0.75 19 13,200 91.0
Male Water Blast Nozzle Fitting

3Z
*ProLance® Fitting


63ZNX-5-4C * 5/16" - 32 2.79 71 0.45 11 0.67 17 13,200 91.0
*ProLance® Fitting

FluidConnectors
Maximum Maximum
2380N-05V00 Black 0.32 8 0.62 16 13,600 93.8 8,500 58.6 34,000 234.5 3.50 89 0.20 0.30
2380N-05V71 Black 0.32 8 0.62 16 13,600 93.8 8,500 58.6 34,000 234.5 3.50 89 0.20 0.30
reinforced and a polyurethane outer cover Contact polyflex for temperatures outside this range.
Typical Applications: Hydraulic tools, gas transfer,
offshore chemical injection service and high pressure testing
of equipment. The -05V71 is typically used in methanol
injection applications.

A
01


601LX-4-5C 1/4" NPT 2.78 71 1.18 30 0.63 16 13,600 93.8
601LX-4-5 1/4" NPT 2.78 71 1.18 30 0.63 16 13,600 93.8
601LX-6-5C 3/8" NPT 2.96 75 1.35 34 0.75 19 13,600 93.8
601LX-6-5 3/8" NPT 2.96 75 1.35 34 0.75 19 13,600 93.8

FluidConnectors
A
AY

B
6AY8X-8-5C * 3/4" - 16 2.95 75 1.25 32 1.00 25 13,600 93.8
*Corrosion resistant (sea water)

A
06
H


606LX-6-5C * 9/16" - 18 2.70 69 1.10 28 0.75 19 10,000 69.0
606LX-8-5C 3/4" - 16 2.82 72 1.22 31 1.00 25 10,000 69.0
*Corrosion resistant (sea water)

FluidConnectors
Maxim um Maxim um
Working Working
Pressure with Pressure with Minim um
Part Jacket Minim um Maxim um 2.5:1 4:1 Minim um B end
N um ber C olor I.D . O.D . Safety Factor Safety Factor B urst Pressure R adius Weight
inch m m inch m m psi MPa psi MPa psi MPa inch mm lbs/ft kg/m
2390N-04V10 Black 0.25 6 0.52 13 12,000 82.8 7,500 51.7 30,000 206.9 3.00 76 0.18 0.27
2390N-04V12 Blue 0.25 6 0.52 13 12,000 82.8 7,500 51.7 30,000 206.9 3.00 76 0.18 0.27
2390N-04V16 Yellow 0.25 6 0.52 13 12,000 82.8 7,500 51.7 30,000 206.9 3.00 76 0.18 0.27
Construction: Polyamide core tube, high tensile strength Temperature Range: -40°F and +140°F (-40°C and +60°C).
wire reinforced and a polyurethane cover. Contact polyflex for temperatures outside this range.
expansion hose with sea-water resistant cover. Ideal for
pressure testing, portable hydraulic tools and for offshore
hydraulic systems.
A
01


1018X-6-4 3/8" NPT 2.72 69 1.47 37 0.75 19 12,000 82.8
6018X-4-4 1/4" NPT 2.62 67 1.37 35 0.63 16 12,000 82.8
6019X-4-4C 1/4" NPT 2.38 60 1.12 28 0.63 16 12,000 82.8

FluidConnectors
A
AY

B
6AY8X-6-4 9/16" - 18 2.54 65 1.30 33 0.75 19 12,000 82.8
6AY9X-6-4C 9/16" - 18 2.36 60 1.10 28 0.68 17 12,000 82.8
A A
JIC Female Swivel Fitting B B
06
H
H
SubSea™ Fitting


6069X-4-4C 7/16" - 20 2.24 57 0.98 25 0.63 16 10,000 69.0
6069X-6-4C 9/16" - 18 2.36 60 1.10 28 0.68 17 10,000 69.0
E206JCC3 * 7/16" - 20 2.12 54 1.20 30 0.63 16 10,000 69.0
E206JEC3 * 9/16" - 18 2.20 56 1.12 28 0.75 19 10,000 69.0
*SubSea™ fitting — specially manufactured for deepwater drilling applications.

A
92


1928X-4-4 1/4" BSPP 2.51 64 1.27 32 0.75 19 12,000 82.8

FluidConnectors
A
BSP Male Fitting B
D9


1D98X-4-4 1/4" BSPP 2.65 67 1.39 35 0.75 19 12,000 82.8
A
5Y


65Y8X-6-4 9/16" - 18 2.78 71 1.55 39 0.75 19 12,000 82.8
65YLX-6-4C 9/16" - 18 2.84 72 1.54 39 0.75 19 12,000 82.8

FluidConnectors
Maximum Maximum Minimum

Part Jacket Minimum Maximum Working Working Minimum Bend
Number Color I.D. O.D. Pressure with Pressure with Burst Pressure Radius Weight
inch mm inch mm psi MPa psi MPa psi MPa inch mm lbs/ft kg/m B
2390N-06V13 Green 0.40 10 0.70 18 10,300 71.0 6,450 44.5 25,810 178.0 3.00 76 0.28 0.42
Construction: Polyamide core tube, high tensile strength Temperature Range: -40°F and +140°F (-40°C and +60°C).
wire reinforced and a polyurethane cover. Contact polyflex for temperatures outside this range.
applications.
A
01


6019X-6-6 3/8" NPT 2.95 75 1.35 34 0.75 19 10,300 71.0
6019X-6-6C 3/8" NPT 2.95 75 1.35 34 0.75 19 10,300 71.0
6019X-8-6 1/2" NPT 3.16 80 1.56 40 0.87 22 10,300 71.0
6019X-8-6C 1/2" NPT 3.16 80 1.56 40 0.87 22 10,300 71.0

FluidConnectors
A
AY


6AY9X-8-6C 3/4" - 16 2.79 71 1.19 30 1.00 25 10,300 71.0
A
06


6069X-8-6C 3/4" - 16 2.79 71 1.19 30 1.00 25 10,000 69.0

FluidConnectors
Maximum Maximum
B
2390N-08V12 Blue 0.50 13 0.81 21 10,400 71.7 6,500 44.8 26,000 179.3 4.00 102 0.38 0.57
2390N-08V13 Green 0.50 13 0.81 21 10,400 71.7 6,500 44.8 26,000 179.3 4.00 102 0.38 0.57
2390N-08V16 Yellow 0.50 13 0.81 21 10,400 71.7 6,500 44.8 26,000 179.3 4.00 102 0.38 0.57
Typical Applications: Low volumetric expansion hose with
sea-water resistant cover. Used in subsea hydraulic B.O.P.
control systems, and in long lengths for pipe cleaning
applications.
A
01


6019X-8-8 1/2" NPT 3.35 85 1.43 36 0.87 22 10,400 71.7
6019X-8-8C 1/2" NPT 3.37 86 1.68 43 1.00 25 10,400 71.7

FluidConnectors
A
AY


6AY9X-11-8C 1" - 12 3.20 81 1.50 38 1.25 32 10,400 71.7
A A
06
H
H
*SubSea Fitting


6069X-8-8C 3/4" - 16 3.00 76 1.30 33 0.87 22 10,000 69.0
E213JFC4 * 3/4" - 16 3.35 85 1.61 41 0.94 24 10,000 69.0
*SubSea Fitting

FluidConnectors
Maximum Maximum
B
2390N-12V03 Green 0.81 21 1.14 29 8,100 55.9 5,575 38.4 22,300 153.8 6.00 152 0.63 0.94
Typical Applications: Flexible, kink-resistant construction
suitable for chemical fluids and operations of hydraulic tools
and equipment.
A
01


6019X-12-12 3/4" NPT 3.88 99 1.58 40 1.07 27 8,100 55.9
1019X-16-12 1" NPT 4.10 104 1.78 45 1.42 36 8,100 55.9
601LX-12-12C 3/4" NPT 4.75 121 2.10 53 1.38 35 8,100 55.9
601LX-16-12C 1" NPT 4.90 124 2.25 57 1.38 35 8,100 55.9

FluidConnectors

A
AY


6AYLX-16-12C 1-5/16" - 12 4.15 105 1.52 39 1.50 38 8,100 55.9
A
06


1069X-12-12 1-1/16" - 12 4.00 102 1.69 43 1.42 36 8,100 55.9
1069X-16-12 1-5/16" - 12 3.93 100 1.57 40 1.62 41 8,100 55.9
606LX-16-12C 1-5/16" - 12 4.29 109 1.68 43 1.50 38 8,100 55.9

FluidConnectors
Maximum Maximum
B
2390N-16V12 Blue 1.00 25 1.37 35 6,500 44.8 4,100 28.3 16,420 113.2 8.00 203 0.84 1.25
2390N-16V13 Green 1.00 25 1.37 35 6,500 44.8 4,100 28.3 16,420 113.2 8.00 203 0.84 1.25
2390N-16V16 Yellow 1.00 25 1.37 35 6,500 44.8 4,100 28.3 16,420 113.2 8.00 203 0.84 1.25
Typical Applications: Low volumetric expansion hose with
sea-water resistant cover. Used for subsea hydraulic
controls, and as long single length hot-line hose for B.O.P.
systems.
A
01


1019X-16-16 1" NPT 4.10 104 1.78 45 1.42 36 6,500 44.8
6019X-16-16C 1" NPT 4.38 111 2.25 57 1.38 35 6,500 44.8

FluidConnectors

A
AY


6AY9X-16-16C 1-5/16" - 12 3.79 96 1.65 42 1.50 38 6,500 44.8
A A
06
H H
*SubSea Fitting


1069X-16-16 1-5/16" - 12 4.04 103 1.76 45 1.62 41 6,500 44.8
6069X-16-16C 1-5/16" - 12 3.79 96 1.65 42 1.50 38 6,500 44.8
E225JIC3 * 1-5/16" - 12 4.30 109 2.10 53 1.63 41 6,500 44.8
*SubSea Fitting

FluidConnectors
Minimum
Part Jacket Minimum Maximum Maximum Burst Minimum
Number Color I.D. O.D. Working Pressure Pressure Bend Radius Weight
inch mm inch mm psi MPa psi MPa inch mm lbs/ft kg/m

B
2440D-025V37 Gray 0.16 4 0.41 10 31,900 220.0 79,750 550.0 4.10 104 0.13 0.19
Typical Applications: Small diameter flexible hose. Ideal
for tight routing applications such as hydraulic tools and high
power plants. Especially suitable for hydraulic pre-tensioning
equipment and specialized pressure fitted sleeve and
coupling removal equipment.
A
B
National Pipe Tapered (NPT) Male Fitting ØR

01
*ProLance® Fitting


601LX-2-2AC * 1/8" NPT ProLance 1.90 48 0.76 19 0.50 13 15,000 103.4
*ProLance® Fitting
A
AY
H

6AYLX-6-2AC 9/16" - 18 2.51 64 1.28 33 0.68 17 31,900 220.0

FluidConnectors
A
High Pressure Tube Nipple B
Y4 ØR


6Y4LX-4-2AC 1/4" - 28 LH 2.96 75 1.71 43 0.63 16 31,900 220.0
6Y4LX-6-2AC 3/8" - 24 LH 3.40 86 2.16 55 0.63 16 31,900 220.0
A
B
ØR
YH
*ProLance® Fitting
Number Thread Size O verall Length Cutoff Allow ance Diam eter Working Pressure

6YHLX-4-2AC-LH 1/4" - 28 LH 2.10 53 0.87 22 0.50 13 31,900 220.0
*ProLance® Fitting
A
B
Female Water Jetting Nozzle Fitting ØR

HY
*ProLance® Fitting

6HYLX-4-2AC 1/4" - 28 RH 1.91 49 0.81 21 0.5 13 31,900 220.0
*ProLance® Fitting

FluidConnectors
Minimum
Part Jacket Minimum Maximum Maximum Burst Minimum
Number Color I.D. O.D. Working Pressure Pressure Bend Radius Weight
B
2440D-03V37 Gray 0.20 5 0.45 11 26,100 180.0 65,250 450.0 5.12 130 0.19 0.28
Typical Applications: Small diameter flexible hose. Ideal
for tight routing applications such as hydraulic tools, pres-
sure testing and high pressure heat exchanger tube clean-
ing, and other water blasting applications in petrochemical
and power plants and general industry. Especially suitable
for hydraulic pre-tensioning equipment and specialized
pressure fitted sleeve and coupling removal equipment.
A
01
H

601LX-4-3 1/4" NPT 2.86 73 1.30 33 0.56 14 15,000 103.4
A
AY
H

6AYLX-6-3 9/16" - 18 2.80 71 1.28 33 0.75 19 26,100 180.0
6AYLX-6-3C 9/16" - 18 2.93 74 1.42 36 0.68 17 26,100 180.0

FluidConnectors
A
High Pressure Tube Nipple Fitting B
Y4 ØR


6Y4LX-6-3C 3/8" - 24 LH 3.86 98 2.35 60 0.67 17 26,100 180.0
6Y4LX-9-3C 9/16" - 18 LH 4.20 107 2.70 69 0.67 17 26,100 180.0
A
YH ØR


6YHLX-4-3C-LH 1/4" - 28 LH 2.71 69 1.52 39 0.60 15 26,100 180.0
6YHLX-6-3C 3/8" - 24 RH 2.61 66 1.41 36 0.60 15 26,100 180.0
6YHLX-6-3C-LH 3/8" - 24 LH 2.61 66 1.41 36 0.60 15 26,100 180.0
A
High Pressure Female Swivel Fitting B
6Y


66YLX-4-3 9/16" - 18 2.80 71 1.28 33 0.75 19 26,100 180.0
66YLX-4-3C 9/16" - 18 2.93 74 1.42 36 0.68 17 26,100 180.0

FluidConnectors
A
5Y

B
65YLX-6-3 9/16" - 18 3.08 78 1.53 39 0.75 19 20,000 137.9

A
92


192LX-4-3 1/4" BSPP 2.95 75 1.38 35 0.75 19 26,100 180.0
692LX-4-3C 1/4" BSPP 2.83 72 1.30 33 0.88 22 26,100 180.0
A
3Z & ZE ØR


6ZELX-5-3C 5/16" - 24 RH 2.22 56 1.10 28 0.60 15 20,000 137.9

FluidConnectors
A
HY
ØR


6HYLX-6-3C 3/8" - 24 RH 1.98 50 0.70 18 0.63 16 26,100 180.0

FluidConnectors
Part Jacket Minimum Maxim um Maxim um Minimum Minimum

Number Color I.D. O .D. Working Pressure Burst Pressure Bend Radius Weight
B
2440N-04V37 G ray 0.25 6 0.50 13 23,780 164.0 59,450 410.0 6.10 155 0.22 0.33
2440N-04V91 Black 0.25 6 0.50 13 23,780 164.0 59,450 410.0 6.10 155 0.22 0.33
Typical Applications: Small diameter, chemical resistant

hose for hydraulic tools, pressure testing, offshore chemical
injection and high pressure heat exchanger tube cleaning in
petrochemical and power plants. The -04V91 is typically
used in methanol injection applications.
A
01


601LX-2-4 1/8" NPT 2.50 64 1.20 30 0.63 16 15,000 103.4
601LX-4-4 1/4" NPT 2.61 66 1.32 33 0.63 16 15,000 103.4
601LX-4-4C 1/4" NPT 2.62 67 1.34 34 0.63 16 15,000 103.4

FluidConnectors
A
AY
Part Con nection Type A B H Maxim um

Num ber Th read Siz e O verall Length Cutoff Allow ance Hex Siz e Working Pressure
inch mm inch mm in ch mm psi MPa

6AYLX-6-4 9/16" - 18 2.63 67 1.32 33 0.75 19 23,780 164.0
6AYLX-6-4C 9/16" - 18 2.69 68 1.39 35 0.68 17 23,780 164.0
6AYLX-6-4C-SD * 9/16" - 18 2.69 68 1.39 35 0.68 17 23,780 164.0
*SD = Corrosion Resistant (seawater) — specially designed for aggressive fluids found in offshore drilling applications.

A
92
H

692LX-4-4 1/4" BSPP 2.51 64 1.21 31 0.87 22 23,780 164.0

YH


6YHLX-6-4C 3/8" - 24 RH 2.60 66 1.41 36 0.67 17 20,000 137.9
6YHLX-6-4C-LH 3/8" - 24 LH 2.60 66 1.41 36 0.67 17 20,000 137.9

FluidConnectors
A
5Y

B
65YLX-6-4 9/16" - 18 2.84 72 1.54 39 0.75 19 20,000 137.9
65YLX-6-4C 9/18" - 18 2.84 72 1.54 39 0.75 19 20,000 137.9
A
HY
ØR


6HYLX-6-4C 3/8" - 24 RH 1.83 46 0.60 15 0.67 17 20,000 137.9

FluidConnectors
Part Jacket Minimum Maximum Maximum Minimum Minimum

Number Color I.D. O.D. Working Pressure Burst Pressure Bend Radius Weight

2440D-05V37 Gray 0.32 8 0.61 15 21,750 150.0 54,370 375.0 6.88 175 0.30 0.45
Typical Applications: Chemical resistant hose for hydraulic
tools, pressure testing of offshore equipment and high
power plants.
A
01
H

601LX-4-5 1/4" NPT 2.78 71 1.18 30 0.63 16 15,000 103.4
601LX-4-5C 1/4" NPT 2.78 71 1.18 30 0.63 16 15,000 103.4
601LX-6-5 3/8" NPT 2.96 75 1.37 35 0.75 19 15,000 103.4
601LX-6-5C 3/8" NPT 2.96 75 1.37 35 0.75 19 15,000 103.4
A
AY


6AYLX-8-5C 3/4" - 16 2.95 75 1.25 32 1.00 25 21,750 150.0

FluidConnectors
A
Medium Pressure Tube Nipple B
Y2
ØR
Part Connection Type Thread A B R Maxim um

Num ber Size O verall Length Cutoff Allow ance Diam eter Working Pressure

B
6Y2LX-9-5C 9/16" - 18 LH 3.83 97 2.13 54 0.95 24 20,000 137.9
6Y2LX-12-5C 3/4" - 16 LH 3.74 95 2.05 52 0.95 24 20,000 137.9
E408LCA2 9/16" - 18 LH (Long Tube) 4.53 115 2.83 72 0.95 24 20,000 137.9
E408LCA3 9/16" - 18 LH (7/8" Thread) 3.83 97 2.13 54 0.95 24 20,000 137.9

A
HY
ØR


6HYLX-9-5C-LH 9/16" - 18 LH 2.60 66 0.88 22 0.82 21 20,000 137.9

A
92
H

692LX-6-5C 3/8" BSPP 2.90 74 1.20 30 1.06 27 21,750 150.0

FluidConnectors
Part Jacket Minim um Maxim um Maximum Minim um Minimum


2440N-06V91 Black 0.40 10 0.77 20 20,300 140.0 50,750 350.0 7.50 191 0.47 0.70
Typical Applications: Chemical resistant hose for hydraulic
tools, pressure testing of offshore equipment and high
power plants.
A
AY


6AYLX-8-6C 3/4" - 16 2.95 75 1.25 32 1.00 25 20,300 140.0
A
Medium Pressure Tube Nipples B
Y2
ØR


6Y2LX-9-6C 9/16" - 18 LH 3.80 97 2.04 52 1.22 31 20,000 137.9

FluidConnectors
Part Jacket Minim um Maxim um Maxim um Minim um Minim um

Num ber Color I.D. O .D. Working Pressure Burst Pressure Bend Radius Weight
inch mm inch mm psi MPa psi MPa inch mm lbs/ft kg/m B

2440N-08V37 G ray 0.50 13 0.88 22 20,400 140.7 51,000 351.7 7.87 200 0.63 0.94
2440N-08V91 Black 0.50 13 0.88 22 20,400 140.7 51,000 351.7 7.87 200 0.63 0.94
resistant alternative to steel pipe and rubber hose for
applications such as waterblasting, gas transfer, chemical
injection, wireline logging services, and pressure testing.
The -08V91 is typically used in methanol injection
applications.
A
01


601LX-8-8 1/2" NPT 3.75 95 1.70 43 1.13 29 15,000 103.4
601LX-8-8C 1/2" NPT 3.75 95 1.70 43 1.13 29 15,000 103.4

FluidConnectors
A
AY


6AYLX-11-8C 1" - 12 3.53 90 1.50 38 1.25 32 20,400 140.7
6AYLX-11-8C-SD * 1" - 12 3.53 90 1.50 38 1.25 32 20,400 140.7
A
Y2
ØR


6Y2LX-9-8C 9/16" - 18 LH 4.20 107 2.20 56 1.13 29 20,000 137.9
6Y2LX-12-8C 3/4" - 16 LH 4.13 105 2.08 53 1.13 29 20,000 137.9
A
C9


6C9LX-16-8C M24 x 1.5 3.48 88 1.44 37 1.26 32 20,000 137.9

FluidConnectors


2440N-12V37 Gray 0.81 21 1.19 30 15,000 103.4 37,500 258.6 10.00 254 0.93 1.39
2440N-12V91 Black 0.81 21 1.19 30 15,000 103.4 37,500 258.6 10.00 254 0.93 1.39
Typical Applications: Flexible, chemical resistant
alternative to steel pipe for applications such as water-
blasting, hydrodemolition, gas transfer, hydraulic workover
and chemical injection. The -12V91 is typically used in
A
01


601LX-12-12C 3/4" NPT 4.75 121 2.10 53 1.38 35 10,000 69.0
601LX-16-12C 1" NPT 4.90 124 2.25 57 1.38 35 10,000 69.0

A
AY
H

6AYLX-16-12C 1-5/16" - 12 4.15 105 1.52 39 1.50 38 15,000 103.4
6AYLX-16-12C-SD 1-5/16" - 12 4.29 109 1.64 42 1.50 38 15,000 103.4

FluidConnectors
A
Y2
ØR


6Y2LX-16-12C 1" - 14 LH 5.39 137 2.75 70 1.56 40 15,000 103.4
A
C9


6C9LX-25-12C M36 x 2 4.26 108 1.58 40 1.81 46 15,000 103.4

A
06


606LX-16-12C 1-5/16" - 12 4.29 109 1.68 43 1.50 38 10,000 69.0

FluidConnectors


2440N-16V37 Gray 1.00 25 1.46 37 13,050 90.0 32,625 225.0 12.00 305 1.28 1.91
2440N-16V91 Black 1.00 25 1.46 37 13,050 90.0 32,625 225.0 12.00 305 1.28 1.91
Typical Applications: Flexible, chemical resistant alterna-
tive to steel pipe for applications such as waterblasting, gas
transfer, hydraulic workover and chemical injection. The
-16V91 is typically used in Methanol injection applications.
A
01


601LX-16-16C 1" NPT 5.00 125 2.50 64 1.38 35 10,000 69.0
A
AY


6AYLX-16-16C 1-5/16" - 12 5.45 139 2.04 52 1.50 38 13,050 90.0
6AYLX-16-16-HCL 1-5/16" - 12 5.45 139 2.04 52 1.50 38 13,050 90.0
6AYLX-16-16C-SD 1-5/16" - 12 5.45 139 2.04 52 1.50 38 13,050 90.0
**HCL = For hydrocloric acid solutions up to 15% by mole

FluidConnectors
A


606LX-16-16C 1-5/16" - 12 3.79 96 1.65 42 1.5 38 10,000 69.0
1" Hammer Union (Fig. 1502) Male

Cone with Wing Nut End Fitting
HE
Part C o n n ectio n T yp e A B H M axim u m

N u m b er T h read Siz e O verall L en g th C u to ff A llo w an ce H ex Siz e Wo rkin g Pressu re
6H EL X-16-16-T C 2-15/16" - 2.5 ACME 6 153 3.63 92.2 N/A N /A 13,050 90.0
1" Hammer Union (Fig. 1502) Female

Cone, Threaded End with Seal
HN

Num b er Thread Siz e O verall Length Cutoff Allo w an ce Diam eter Working Pressure

6HNL X-16-16-TC 2-15/16" - 2.5 ACME 6 153 3.63 92.2 1.87 47.5 13,050 90.0

FluidConnectors
Part Jacket Minim um Maxim um Maximum Minim um Minimum


2440N-32V10 Black 2.00 51 2.71 69 5,000 34.5 20,000 137.9 20.00 508 3.50 5.22
tive to steel pipe and multi-spiral 100R13 hoses for applica-
tions such as high volume flow rate pumping offshore,
oilfield well service cementing, chemical injection and gas
transfer. High pressure hydraulic applications with aggres-
sive fluids, and as large flow waterblast delivery hose to
multiple work stations.
A
01


601LX-32-32 2" NPT 5.57 141 3.00 76 2.50 64 5,000 34.5
A
06
H
Num b er Thread Siz e O verall Length Cutoff Allo w an ce Hex Siz e Working Pressure

606LX-32-32 2-1/2" -12 5.57 141 3.00 76 2.50 64 5,000 34.5

FluidConnectors
A
2" Hammer Union (Fig. 1502) Male B
Cone with Wing Nut End Fitting

HE


6HELX-32-32-TC 4-1/8" - 3 ACME * * * * N/A N/A 5,000 34.5
A
2" Hammer Union (Fig. 1502) Female B
Cone, Threaded End with Seal

ØR
HN


6HNL X-32-32-TC 4-1/8" - 3 ACME * * * * * * 5,000 34.5
Note: Other End Connections Are Available. Please Contact

Polyflex For More information.

FluidConnectors


B
2640D-025V32 Blue 0.16 4 0.48 12 40,600 280.0 101,500 700.0 5.50 140 0.20 0.30
for tight routing applications such as hydraulic tools, and
high pressure heat exchanger tube cleaning in petrochemical
and power plants. Especially suitable for hydraulic pre-
tensioning equipment, specialized pressure fitted sleeve
and coupling removal equipment. Pressure testing, operations
of portable jacks and remote pressure sensing devices.
A
AY


6AYHX-6-2AC 9/16" - 18 3.13 79 1.33 34 0.69 18 40,600 280.0

FluidConnectors
A
Y4 ØR


6Y4HX-4-2AC 1/4" - 28 LH 3.50 89 1.75 44 0.68 17 40,600 280.0
6Y4HX-6-2AC 3/8" - 24 LH 3.95 100 2.20 56 0.68 17 40,600 280.0
A
6Y


66YHX-4-2AC 9/16" - 18 3.13 79 1.33 34 0.69 18 40,600 280.0

FluidConnectors


B
2640D-03V32 Blue 0.20 5 0.51 13 36,250 250.0 90,620 625.0 6.88 175 0.27 0.40
Typical Applications: High pressure waterblast cleaning of
heat exchanger tubes in petrochemical and power plants.
Especially suitable for hydraulic pre-tensioning equipment
and specialized pressure fitted sleeve and coupling removal
equipment. Pressure testing, operations of portable jacks
and remote pressure sensing devices.
A
AY


6AY5X-6-3 9/16" - 18 3.07 78 1.29 33 0.75 19 36,250 250.0
6AY5X-6-3C 9/16" - 18 3.10 79 1.43 36 0.69 18 36,250 250.0
A
Y4 ØR


6Y45X-6-3C 3/8" - 24 LH 4.06 103 2.35 60 0.75 19 36,250 250.0
6Y45X-9-3C 9/16" - 18 LH 4.42 112 2.70 69 0.75 19 36,250 250.0

FluidConnectors
A
6Y


66Y5X-4-3 9/16" - 18 3.07 78 1.29 33 0.75 19 36,250 250.0
66Y5X-4-3C 9/16" - 18 3.10 79 1.43 36 0.69 18 36,250 250.0

A
92


1925X-4-3 1/4" BSPP 3.07 78 1.26 32 0.87 22 36,250 250.0

FluidConnectors


B
2640N-08V32 Blue 0.50 13 0.97 25 26,100 180.0 65,250 450.0 11.41 290 0.91 1.36
Construction: Polyamide core tube, high strength wire
reinforced and a polyamide outer cover.
tive to steel pipe delivery hose in waterblasting,
hydrodemolition systems, chemical injection and gas
transfer, oil field wireline logging services, and pressure
testing.
Temperature Range: -40°F and +140°F (-40°C and +60°C).
Contact polyflex for temperatures outside this range.
A
AY


6AY5X-11-8C 1" - 12 4.25 108 1.72 44 1.25 32 26,100 180.0

FluidConnectors
A
Y2
ØR


6Y25X-9-8C 9/16" - 18 LH 4.30 109 2.19 56 1.25 32 20,000 137.9
6Y25X-12-8C 3/4" - 16 LH 4.20 107 2.10 53 1.25 32 20,000 137.9
A
C9


6C95X-16-8C M24 x 1.5 3.58 91 1.45 37 1.26 32 20,000 137.9

FluidConnectors


2640N-12V32 Blue 0.75 19 1.30 33 20,300 140.0 50,750 350.0 13.77 350 1.41 2.10
2640N-12V71 Black 0.75 19 1.30 33 20,300 140.0 50,750 350.0 13.77 350 1.41 2.10
tive to steel pipe for waterblasting, hydrodemolition, gas
transfer, oil field snubbing and hydraulic workover systems,
and chemical injection service. The -12V71 is typically used
in methanol injection applications.

A
AY


6AY5X-16-12C 1-5/16" - 12 4.26 108 1.52 39 1.50 38 20,300 140.0
6AY5X-16-12C-SD * 1-5/16" - 12 4.26 108 1.52 39 1.50 38 20,300 140.0
*SD = Corrosion Resistant (sea water) — specially designed for aggressive fluids found in offshore drilling applications.

FluidConnectors
Hose and Fittings
A
Y2
ØR


6Y25X-16-12C 1" - 14 LH 5.48 139 2.75 70 1.69 43 20,000 137.9
A
C9


6C95X-25-12C M36 x 2 4.37 111 1.60 41 1.81 46 15,000 103.4

FluidConnectors
Hose and Fittings

Black Eagle TC
Black
inch
1.50
mm
38
inch
2.80
mm
71
psi
10,000
MPa
69.0
psi
33,350
MPa
230.0
inch
20.00
mm
508
lbs/ft
4.84
kg/m
7.21
B
2640N-24V80
Construction: Polyamide core tube, high strength wire Temperature Range: -40°F and +140°F (-40°C and
reinforced and a polyurethane outer cover. +60°C). Contact polyflex for temperatures outside this
range.
tive to steel pipe for high volume flow rate pumping
offshore, oilfield well service cementing, chemical injection
and gas transfer. For use in high pressure hydraulic
systems, and as large volume waterblast delivery hose to
distribution manifolds for multiple work stations.
A
National Pipe Tapered (NPT) Male Fit- B
ting
01
ØR


6015X-32-24-TC 2" NPT 9.08 231 4.20 107 3.35 85 10,000 69.0

FluidConnectors
Hose and Fittings
A
2" Hammer Union (Male) Cone B
with Wing Nut End Fitting

HE


6HE5X-32-24-TC 4-1/8" - 3 ACME 10.70 272 5.80 147 N/A N/A 10,000 69.0
A
2" Hammer Union (Female) Cone, B
Threaded End with Seal

ØR
HN


6HN5X-32-24-TC 4-1/8" - 3 ACME 9.15 232 4.25 108 3.35 85 10,000 69.0

FluidConnectors

Black Eagle TC
Num ber Color I.D. O.D. Working Pressure Burst Pressure Bend Radius Weight

B
2640N-32V80 Black 2.00 51 3.30 84 10,000 69.0 26,100 180.0 32.00 813 5.70 8.49
tive to steel pipe for high volume flow rate pumping offshore,
oilfield well service cementing, chemical injection and gas
transfer. For use in high pressure hydraulic systems, and as
large volume waterblast delivery hose to distribution
manifolds for multiple work stations.
A
01
ØR

6015X-32-32-TC 2" NPT 10.50 267 4.08 104 3.25 83 10,000 69.0

FluidConnectors
A
2" Hammer Union (Male) Cone B
with Wing Nut End Fitting

HE
Part Co nnection Type A B H Maxim um

Num ber Thread Siz e O verall Length Cutoff Allo w an ce Hex Siz e Wo rking Pressure

6HE5X-32-32-TC 4-1/8" - 3 ACME 11.25 286 5.87 149 N/A N/A 10,000 69.0
A
2" Hammer Union (Female) Cone, B
Threaded End with Seal

ØR
HN


6HN5X-32-32-T C 4-1/8" - 3 ACME 9.50 241 4.12 105 3.88 98 10,000 69.0

FluidConnectors

Num ber Color I.D. O.D. Working Pressure Burst Pressure Bend Radius Weight

2740D-025V30 Black 0.16 4 0.48 12 45,000 310.3 112,500 775.9 4.75 121 0.21 0.31
for tight routing applications such as hydraulic tools, and
high pressure heat exchanger tube cleaning in petro-
chemical power plants. Especially suitable for hydraulic
pre-tensioning equipment, specialized pressure fitted
sleeve and coupling removal equipment. Pressure testing,
operations of portable jacks and remote pressure sensing
devices.
A
AY


6AYHX-6-2AC 9/16"-18 3.13 79 1.33 34 0.69 18 45,000 310.3
A
Y4 ØR
Part Co nnection Type A B R Maxim um

Num ber Thread Siz e O verall Length Cutoff Allo w an ce Diam eter Wo rking Pressure

6Y4HX-4-2AC 1/4"-28 LH 3.50 89 1.75 44 0.68 N/A 45,000 310.3
6Y4HX-6-2AC 3/8"-24 LH 3.95 100 2.20 56 0.68 N/A 45,000 310.3

FluidConnectors
A
6Y


66YHX-4-2AC 9/16"-18 3.13 79 1.33 34 0.69 18 45,000 310.3

FluidConnectors


2740D-03V30 Black 0.20 5 0.52 13 40,600 280.0 101,500 700.0 6.00 152 0.32 0.48
Typical Applications: Pressure testing and ultra high
pressure waterblast lances for high pressure tube cleaning
in petrochemical and power plants. Replaces high pressure
steel tubing where flexibility and long lengths are important
to minimize leak points. Compression forming process
(hydroforming) as a manufacturing procedure applying
water pressure to produce complex hollow parts made
from pipe-like materials for truck and automotive industries.
A
AY


6AYHX-6-3C 9/16" - 18 3.20 81 1.40 36 0.68 17 40,600 280.0
A
Y4 ØR


6Y4HX-6-3C 3/8" - 24 LH 4.05 103 2.36 60 0.82 21 40,600 280.0
6Y4HX-9-3C 9/16" - 18 LH 4.42 112 2.70 69 0.82 21 40,600 280.0

FluidConnectors
A
6Y


66YHX-4-3C 91/6" - 18 3.20 81 1.40 36 0.68 17 40,600 280.0

A
92


692HX-4-3C 1/4" BSPP 3.07 78 1.28 33 0.87 22 40,600 280.0

FluidConnectors


2740D-05V32 Blue 0.32 8 0.67 17 36,230 249.9 90,580 624.7 7.87 200 0.47 0.70
Typical Applications: Pressure testing and ultra high
pressure waterblast delivery hose for industrial cleaning and
shipbuilding industries for coatings removal and water jet
cutting equipment.
A
AY


6AYHX-8-5C 3/4" - 16 2.97 75 1.24 31 1.00 25 30,000 206.9
6AYHX-10-5C 7/8" - 14 3.47 88 1.83 46 1.25 32 36,230 249.9
A
Y4 ØR
Part Connection Type Thread A B R Maximum

Number Size Overall Length Cutoff Allowance Diameter Working Pressure

6Y4HX-9-5C 9/16" - 18 LH 4.15 105 2.53 64 1.00 25 36,230 249.9
6Y4HX-9-5C-XLT 9/16" - 18 LH (Long Tube) 5.00 127 3.38 86 1.00 25 36,230 249.9

FluidConnectors


2840D-03V34 Red 0.20 5 0.59 15 48,000 331.0 120,000 827.6 7.87 200 0.37 0.55
2840D-03V34 * Red 0.20 5 1.10 28 * 55,000 380.0 120,000 827.6 7.87 200 1.23 1.83
*With Pressure Containment Shield
Typical Applications: Ultra high pressure hose used with
robotic controlled Waterjet cutting equipment, and coatings
removal from marine vessels near or at shipbuilding
facilities. Replaces high pressure steel tubing where
flexibility and long lengths are important to minimize leak
points. Compression forming process (hydroforming) as
a manufacturing procedure applying water pressure to
produce complex hollow parts made from pipe-like materials
for truck and automotive industries.
A
Y4 ØR


6Y4WX-6-3C 3/8" - 24 LH 4.30 109 2.35 60 0.88 22 55,000 379.3
6Y4WX-9-3C 9/16" - 18 LH 4.42 112 2.50 64 0.88 22 55,000 379.3
Part C o n n ectio n T yp e A B R Maxim u m

N u m b er T h read Siz e O verall L en g th Cu to ff Allo w an ce D iam eter Wo rkin g Pressu re
6A YWX-6-3C 9/16" - 18 3.59 91 1.49 38 0.88 22 48,000 331.0
6A YWX-6-3C -55 9/16" - 18 3.59 91 1.49 38 0.88 22 55,000 379.3

FluidConnectors


2840D-05V32 Blue 0.32 8 0.78 20 44,000 303.4 110,000 758.6 9.84 250 0.74 1.10
2840D-05V32 * Blue 0.32 8 1.40 36 55,000 379.3 110,000 758.6 9.84 250 0.74 1.10
*With Pressure Containment Shield
Typical Applications: Ultra high pressure water jet cutting
with robotic controlled waterjet cutting equipment, and
coatings removal from marine vessels near or at shipbuild-
ing facilities. Replaces high pressure steel tubing where
flexibility and long continuous lengths are very important
for high volume flow requirements, and to minimize leak
points. Compression forming process (hydroforming) as a
manufacturing procedure applying water pressure to
produce complex hollow parts made from pipe-like materials
for truck and automotive industries.
Type “M” Female Swivel Fitting

AY


6AYWX-10-5C 7/8" - 14 4.43 113 1.77 45 1.25 32 44,000 303.4
6AYWX-10-5C-55 7/8" - 14 4.43 113 1.77 45 1.25 32 55,000 379.3
A
Y4 ØR
Part Connection Type Thread A B R Maximum

Number Size Overall Length Cutoff Allowance Diameter Working Pressure

6Y4WX-9-5C 9/16" - 18 LH 5.13 130 2.47 63 1.10 28 44,000 303.4
6Y4WX-9-5C-55 9/16" - 18 LH 5.13 130 2.47 63 1.10 28 55,000 379.3
6Y4WX-9-5C-RCS 9/16" - 18 LH (Long Tube) 5.73 146 3.07 78 1.10 28 44,000 303.4

FluidConnectors


2840D-08V30 Black 0.50 13 1.16 29 36,000 248.3 90,000 620.7 * * * *
*Call for information.

Typical Applications: Ultra high pressure waterblast
delivery hose and high pressure coatings removal. Replaces
high pressure steel tubing where flexibility and long single
lengths are important to minimize leak points for water jet
cutting equipment.
A
YM ØR

Number Thread Siz e O verall Length Cutoff Allow ance Diameter Working Pressure

6Y4WX-16-08C 1" - 12 LH * * * * * * 30,000 206.9
*Call for information.

FluidConnectors
Hose and Fittings 2X00 Series
2X90N-04 polyflex Hose

“Red Snake”
Maximum Maximum
B
2X90N-04V14 Red 0.25 6 0.53 13 18,560 128.0 11,600 80.0 46,400 320.0 1.57 40 0.19 0.28
Construction: Polyamide core tube, steel wire and fiber Temperature Range: -40°F and +140°F (-40°C and +60°C).
combination reinforcement with a polyurethane outer cover. Contact polyflex for temperatures outside this range.
resistant alternative to rubber hose for waterblast cleaning
applications in pulp and paper mills, steel mills, power plants
and petrochemical plants. Available in long lengths.
A
01


1018X-6-4 3/8" NPT 2.72 69 1.47 37 0.75 19 15,000 103.4
6018X-4-4 1/4" NPT 2.62 67 1.37 35 0.63 16 15,000 103.4
601LX-4-4C 1/4" NPT 2.62 67 1.37 35 0.63 16 15,000 103.4
601LX-4-4-PL * 1/4" NPT 2.00 67 1.37 35 0.63 16 15,000 103.4
*ProLance® Fitting
A
AY
Part Conn ectio n Type A B H Maxim um

Num ber Th read Siz e O verall Length Cu to ff Allow an ce Hex Siz e Working Pressu re
inch mm inch mm inch mm p si MPa

6AY8X-6-4 9/16" - 18 2.54 65 1.30 33 0.75 19 16,240 112.0
6AYLX-6-4C 9/16" - 18 2.69 68 1.39 35 0.68 17 18,560 128.0
6AYLX-6-4C-SD * 9/16" - 18 2.54 65 1.30 33 0.75 19 18,560 128.0

FluidConnectors
A
06


1068X-4-4 7/16" - 20 2.64 67 1.37 35 0.75 19 10,000 69.0
1068X-6-4 9/16" - 18 2.58 66 1.30 33 0.75 19 10,000 69.0
6069X-4-4C 7/16" - 20 2.24 57 0.98 25 0.63 16 10,000 69.0
6069X-6-4C 9/16" - 18 2.36 60 1.10 28 0.68 17 10,000 69.0
A
5Y
Part Conn ectio n Type A B H Maxim um

Num ber Th read Siz e O verall Length Cu to ff Allow an ce Hex Siz e Working Pressu re
inch mm inch mm inch mm p si MPa

65Y8X-6-4 9/16" - 18 2.78 71 1.55 39 0.75 19 16,240 112.0
65YLX-6-4C 9/16" - 18 2.84 72 1.54 39 0.75 19 18,560 128.0

A
92

Number Thread Size Overall Length Cutoff Allow ance Hex Size Working Pressure

6928X-4-4 1/4" BSPP 2.51 64 1.27 32 0.75 19 16,240 112.0

FluidConnectors
A
BSP Male Fitting B
D9

B
1D98X-4-4 1/4" BSPP 2.65 67 1.39 35 0.75 19 16,240 112.0
A
MB
ØR


1MB8X-6-4 None 2.85 72 1.58 40 0.86 22 10,000 69.0
A
C3


1C38X-4-4 M14 x 1.5 2.45 62 1.20 30 0.75 19 16,240 112.0

FluidConnectors

“Red Snake”
Maximum Maximum
2X90N-06V14 Red 0.40 10 0.85 22 23,200 160.0 15,000 103.4 58,000 400.0 3.75 95 0.63 0.94
A
01


601RS-6-6 3/8" NPT 3.3 84 1.77 45 0.75 19 15,000 103.4
A
C3


6C9RS-14-6 M22x1.5 3.3 84 1.77 45 1 25 23,200 160.0

FluidConnectors

“Red Snake”
Maximum Maximum
B
2X90N-08V14 Red 0.50 13 0.91 23 15,080 104.0 9,425 65.0 37,700 260.0 3.15 80 0.45 0.67
A
01


101RS-8-08 1/2" NPT 3.68 93 1.45 37 0.87 22 15,000 103.4
A
C9


1C9RS-16-08 M24 x 1.5 3.55 90 1.45 37 1.26 32 15,000 103.4

FluidConnectors
Hose and Fittings

“Red Snake”


2X90N-12V04 Red 0.81 21 1.30 33 17,400 120.0 43,500 300.0 7.87 200 1.18 1.75
Construction: Polyamide core tube, high strength wire Temperature Range: -40°F and +140°F (-40°C and
reinforced and a polyamide outer cover. +60°C). Contact polyflex for temperatures outside this
range.
Typical Applications: Flexible, chemical resistant
alternative to steel pipe for applications such as water-
blasting, hydrodemolition, gas transfer, hydraulic workover
and chemical injection. The -12V91 is typically used in
A
01


6015X-12-12C 3/4" NPT 4.98 126 2.23 57 1.38 35 10,000 69.0
6015X-16-12C 1" NPT 4.80 122 2.05 52 1.38 35 10,000 69.0

A
AY


6AY5X-16-12C 1-5/16" - 12 4.26 108 1.52 39 1.50 38 17,400 120.0

FluidConnectors
Hose and Fittings
A
Y2
ØR

B
6Y25X-16-12C 1" - 14 LH 5.49 139 2.75 70 1.69 43 17,400 120.0
A
C9


6C95X-25-12C M36 x 2 4.16 106 1.58 40 1.81 46 15,000 103.4

A
06


6065X-16-12C 1-5/16" - 12 4.39 111 1.68 43 1.50 38 10,000 69.0

FluidConnectors
Hose and Fittings 57CR Series
57CRN polyflex Hose

Collapse Resistant
High Pressure U.S. Patents 6,390,141 & 6,742,545
Maximum
Maximum Elongation
Part Jacket Nominal Nominal Working @ Working Minimum Minimum
Number Color I.D. O.D. Pressure Pressure Burst Pressure Bend Radius Weight
inch mm inch mm psi MPa % psi MPa inch mm lbs/ft kg/m

57CRN-08V02 Blue 0.50 13 1.18 30 5,000 34.5 0 to +4% 20,000 137.9 6.25 159 0.630 0.937
57CRN-08V06 Yellow 0.50 13 1.18 30 5,000 34.5 0 to +4% 20,000 137.9 6.25 159 0.630 0.937
57CRN-16V02 Blue 1.00 25 2.00 51 5,000 34.5 0 to +4% 20,000 137.9 10.75 273 1.460 2.170
57CRN-16V06 Yellow 1.00 25 2.00 51 5,000 34.5 0 to +4% 20,000 137.9 10.75 273 1.460 2.170
* Call for information regarding collapse strength.

Internal impulse requirement: SAE J343; Minimum of 150,000 cycles at 140°F (+60°C) and 5,000 psi (34.5 MPa)
Scope: Specification HS-57CR details the performance of Typical Applications: Offshore oilfield exploration and
collapse resistant hose for use with high internal pressures. production. For use with petroleum, synthetic hydraulic oils,
The hose is best suited for offshore oil exploration applica- water and water based hydraulic fluids. Hose is not recom-
tions requiring internal pressure resistance and external mended for high pressure pneumatic service applications.
pressure support. The 57CR series hose offers the ultimate
in a lightweight, kink and collapse resistant rugged hose Temperature Range: -40°F and +140°F (-40°C and +60°C).
construction. Contact polyflex for temperatures outside this range.
Construction: The 57CR consists of a polyamide core tube, Color: Standard is blue. Other colors available upon
reinforced with high-tensile strength aramid fiber, and a request.
Patent-Pending stainless steel reinforced helix support. The
hose is jacketed, as standard, with a weather and ultra-high
abrasion resistant, non-perforated polymeric jacket. The
hose suitable for marine hydraulic (salt water) environment.

A
06
H

606CR-8-8C 3/4" - 16 3.875 98 2.125 54 1.000 25 5,000 34.5
606CR-16-16C 1-5/16" - 12 5.000 127 2.750 70 1.625 41 5,000 34.5

FluidConnectors
Hose and Fittings HP Series
HP® – High Pressure Hose

HP8® – High Pressure Non-
Conductive Hose
Typ. Volume
Maximum Minimum Expansion at Crimp
B
Part Jacket Minimum Maximum Working Minimum Bend Working Part Guard Kit Part Guard Kit Part Fitting
No. Color I.D. O.D. Pressure Burst Pressure Radius Weight Pressure No. Number 12 in. Number 23 in. Series
inch mm inch mm psi MPa psi MPa inch mm lbs/ft kg/m cc/ft. cc/m
HP-3 Blue 0.19 5 0.52 13 10,000 69.0 40,000 275.9 1.50 38 .09 0.13 2.4 7.87 HP-3 HPG3-12K HPG3-23K HP
HP8-3 Orange 0.19 5 0.52 13 10,000 69.0 40,000 275.9 1.50 38 .09 0.13 2.4 7.87 HP8-3 HPG3-12K-ORG HPG3-23K-ORG HP
Meets or exceeds SAE J517 for less than 50 microamps Temperature Range: -40°F to +150°F (-40°C to +66°C) for
leakage under 75000 volts per foot. petroleum or synthetic hydraulic fluids, water base fluids and
compatible chemicals.
Construction: Specially formulated thermoplastic
elastomer core tube, high tensile strength aramid fiber Hose Guards: See page B110.
reinforcement. HP8 Hose has an orange non-perforated
elastomeric cover. Fitting Series: HP Series. Field attachable crimp fittings
with prior divisional certification.
Applications: High pressure hydraulic, pneumatic and
lubricating oils including high pressure tools, rigging jacks, Refer to HP Hose Assembly Instructions Bulletin No.
test apparatus, oilfield pressure control devices and offshore 4660-B45.
oil applications. Non-conductive version used in aerial lift
equipment. Not recommended for water blast applications or
for use in static discharge applications; i.e., airless paint
spray.
Note: The above hose(s) are not intended for use in static discharge applications; i.e., airless paint spray.

FluidConnectors
A
01
H
B
Steel NPTF Thread Minim um A Cutoff H Pusher Sw age Crim p
Part No. Siz e I.D. O verall Length Allow ance Hex Siz e Num ber Die Die
inch mm inch mm inch mm inch mm

101HP-2-3 1/8–27 0.19 5 1.94 49 1.19 30 0.56 14 PUM 001 HP3 80C-HP3
101HP-2-4 1/8–27 0.25 6 2.10 53 1.19 30 0.63 16 PUM 002 HP4 80C-HP4
101HP-4-3 1/4–18 0.19 5 2.12 54 1.38 35 0.69 17 PUM 004 HP3 80C-HP3
101HP-4-4 1/4–18 0.25 6 2.28 58 1.38 35 0.69 17 PUM 004 HP4 80C-HP4
101HP-4-6 1/4–18 0.38 10 2.70 69 1.50 38 0.75 19 PUM 005 HP6 80C-HP6
101HP-6-3 3/8–18 0.19 5 2.22 56 1.50 38 0.75 19 PUM 005 HP3 80C-HP3
101HP-6-4 3/8–18 0.25 6 2.38 60 1.38 35 0.75 19 PUM 005 HP4 80C-HP4
101HP-6-6 3/8–18 0.38 10 2.70 69 1.50 38 0.75 19 PUM 005 HP6 80C-HP6
101HP-8-6 1/2–14 0.38 10 2.96 75 1.75 44 0.94 24 PUM 009 HP6 80C-HP6
Note: Some versions of HP Fittings may not allow for use of swage dies. Care should be taken to assure proper use. Consult factory with questions.
A
06
37°
J H
NPTF A B
Steel Thread Minimum Overall Cutoff H J Pusher Swage Crimp
Part No. Size I.D. Length Allowance Hex Size Hex Size Number Die Die
inch mm inch mm inch mm inch mm inch mm

106HP-4-3 7/16–20 0.19 5 2.20 56 1.44 37 0.63 16 0.63 16 PUF 011 HP3 80C-HP3
106HP-4-4 7/16–20 0.25 6 2.49 63 1.56 40 0.63 16 0.63 16 PUF 010 HP4 80C-HP4
106HP-5-4 1/2–20 0.25 6 2.52 64 1.56 40 0.75 19 0.75 19 PUF 013 HP4 80C-HP4
106HP-6-4 9/16–18 0.25 6 2.59 66 1.69 43 0.75 19 0.75 19 PUF 015 HP4 80C-HP4
106HP-6-6 9/16–18 0.38 10 2.91 74 1.63 41 0.75 19 0.75 19 PUF 015 HP6 80C-HP6
Note: Some versions of HP Fittings may not allow for use of swage dies. Care should be taken to assure proper use. Consult factory with questions.

FluidConnectors
High Pressure Safety Guard Kit

Use with Parker HP or HP8 hose only. Each guard
kit contains two color coded, pre-assembled 12" or
23" guards, a color coded warning tag, and complete
assembly instructions. Use blue guards with HP hose
and orange guards with HP8 hose.
B
Blue Orange Weight Crimp
Guard Kit Guard Kit Per Die
Part Part Hose Guard Part
Number** Number* Size lbs. Number
HPG3-12K HPG3-12K-ORG -3 0.27 80C-G03

HPG3-23K HPG3-23K-ORG -3 0.37 80C-G03
HPG4-12K HPG4-12K-ORG -4 0.32 80C-G04
HPG4-23K HPG4-23K-ORG -4 0.42 80C-G04
HPG6-12K HPG6-12K-ORG -6 0.40 80C-G06
HPG6-23K HPG6-23K-ORG -6 0.52 80C-G06
* For HP8 hose
** For HP hose

FluidConnectors
Hose and Fittings Twin Lines
2245N-04-D Twin Line

polyflex Hose
Maximum Maximum
2245N-04V00 Black 0.25 6 0.50 13 10,440 72.0 6,525 45.0 26,100 180.0 2.76 70 0.17 0.25
2245N-04V02 Blue 0.25 6 0.50 13 10,440 72.0 6,525 45.0 26,100 180.0 2.76 70 0.17 0.25
2245N-04V04 Red 0.25 6 0.50 13 10,440 72.0 6,525 45.0 26,100 180.0 2.76 70 0.17 0.25
Construction: Polyamide core tube, high strength wire Typical Applications: Industrial equipment, rescue
reinfored and a polyurethane outer cover. equipment, hydraulic tools.
Assembly includes any combination of two hoses (mix or
match 2245N-04-D and 2380N-04-D) with any fitting listed
for that hose.
A
01
Part Connection Type A B H Hex Size/ Maximum

Number Thread Size Overall Length Cutoff Allowance R Diameter Working Pressure

101NX-4-4 1/4" NPT 2.57 65 1.35 34 0.63 16 10,400 71.7
101NX-6-4 3/8" NPT 2.63 67 1.38 35 0.75 19 10,400 71.7
601NX-4-4C 1/4" NPT 2.38 60 1.12 28 0.63 16 10,400 71.7

FluidConnectors
A
AY

B
6AYNX-6-4 9/16" - 18 2.56 65 1.32 34 0.75 19 10,440 72.0
6AYNX-6-4C 9/16" - 18 2.36 60 1.11 28 0.68 17 10,440 72.0
A
06


106NX-4-4 7/16" - 20 2.56 65 1.37 35 0.75 19 10,000 69.0
106NX-6-4 9/16" - 18 2.56 65 1.32 34 0.75 19 10,000 69.0
606NX-4-4C 7/16" - 20 2.23 57 0.99 25 0.63 16 10,000 69.0
606NX-6-4C 9/16" - 18 2.36 60 1.11 28 0.68 17 10,000 69.0

A
BC


1BCNX-4-4 1/4" BSPP 2.50 64 1.25 32 0.75 19 10,440 72.0

FluidConnectors
A
BSP Male Fitting B
D9


1D9NX-4-4 1/4" BSPP 2.64 67 1.40 36 0.75 19 10,440 72.0
A
C3


1C3NX-8-4 M14 x 1.5 2.45 62 1.20 30 0.75 19 10,440 72.0

FluidConnectors
2380N-04-D Twin Line

polyflex Hose
B
Maximum Maximum
2380N-04V00 Black 0.25 6 0.53 13 16,240 112.0 10,150 70.0 40,600 280.0 2.76 70 0.22 0.33
2380N-04V02 Blue 0.25 6 0.53 13 16,240 112.0 10,150 70.0 40,600 280.0 2.76 70 0.22 0.33
2380N-04V04 Red 0.25 6 0.53 13 16,240 112.0 10,150 70.0 40,600 280.0 2.76 70 0.22 0.33
Construction: Polyamide core tube, high strength wire Typical Applications: Industrial equipment, rescue equip-
reinfored and a polyurethane outer cover. ment, hydraulic tools.
Assembly includes any combination of two hoses (mix or
match 2245N-04-D and 2380N-04-D) with any fitting listed
for that hose.
A
01


1018X-6-4 3/8" NPT 2.72 69 1.47 37 0.75 19 15,000 103.4
6018X-4-4 1/4" NPT 2.62 67 1.37 35 0.63 16 15,000 103.4
601LX-4-4C 1/4" NPT 2.62 67 1.37 35 0.63 16 15,000 103.4

FluidConnectors
A
AY


6AY8X-6-4 9/16" - 18 2.54 65 1.30 33 0.75 19 16,240 112.0
6AYLX-6-4C 9/16" - 18 2.69 68 1.39 35 0.68 17 16,240 112.0
6AYLX-6-4C-SD * 9/16" - 18 2.54 65 1.30 33 0.75 19 16,240 112.0
A
06


1068X-4-4 7/16" - 20 2.64 67 1.37 35 0.75 19 10,000 69.0
1068X-6-4 9/16" - 18 2.58 66 1.30 33 0.75 19 10,000 69.0
6069X-4-4C 7/16" - 20 2.24 57 0.98 25 0.63 16 10,000 69.0
6069X-6-4C 9/16" - 18 2.36 60 1.10 28 0.68 17 10,000 69.0
A
5Y


65Y8X-6-4 9/16" - 18 2.78 71 1.55 39 0.75 19 16,240 112.0
65YLX-6-4C 9/16" - 18 2.84 72 1.54 39 0.75 19 16,240 112.0

FluidConnectors

A
92

B
6928X-4-4 1/4" BSPP 2.51 64 1.27 32 0.75 19 16,240 112.0
A
BSP Male Fitting B
D9


1D98X-4-4 1/4" BSPP 2.65 67 1.39 35 0.75 19 16,240 112.0
A
MB
ØR


1MB8X-6-4 None 2.85 72 1.58 40 0.86 22 10,000 69.0

FluidConnectors
A
C3


1C38X-4-4 M14 x 1.5 2.45 62 1.20 30 0.75 19 16,240 112.0

FluidConnectors
Hose and Fittings Bundles
Bundles
Parflex (10,000 psi hose and lower) can be combined
with polyflex hose (10,000 psi and above) in custom
engineered umbilicals, also referred to as hose bundles.
Our technical staff will help design a product to meet
your specifications and routing requirements. Strength
members, tubing, electrical cables, pneumatic lines, and
more can be combined with hose, inside of a protective
jacket per your custom specifications.
Typical applications include offshore and land-based
exploration and drilling operations, hydraulic tool supply
B
lines, medical tools, surface preparation, robotics,
construction equipment, and many others.
polyflex’s unique manufacturing process can produce
very long lengths of steel reinforced thermoplastic hose
with very low volumetric expansion characteristics.
High pressure, long lengths, light weight and fast
response times are features that account for the
success of polyflex hose umbilicals.
Contact the division or visit our website with your ideas
and requirements.

FluidConnectors
Hose and Fittings Notes

FluidConnectors
Adapters Table of Contents
Table of Contents
Type M
YAYA ......................................................................................... C4
YAY6 ......................................................................................... C4
Plugs, caps and torpedos ......................................................... C5
YAY5 ......................................................................................... C6
YA02 ......................................................................................... C6
YA01 ......................................................................................... C7
20,000 PSI — Medium Pressure
5YY5 ........................................................................................ C9
5YY6 ...................................................................................... C10 C
6YY5 ...................................................................................... C10
5Y01 ....................................................................................... C11
025Y ....................................................................................... C12
5Y5Y ...................................................................................... C13
5Y6Y ...................................................................................... C14
5Y02 ....................................................................................... C15
Y5Y5 ...................................................................................... C16
Y5Y6 ...................................................................................... C16
Y501 ....................................................................................... C17
L5Y ........................................................................................ C17
T5Y ........................................................................................ C18
X5Y ........................................................................................ C18
Y2N ........................................................................................ C19
Y2C ........................................................................................ C19
Plugs ...................................................................................... C19
Nipples ................................................................................... C19
30,000/60,000 PSI — High Pressure
6YY6 ...................................................................................... C21
6Y01 ....................................................................................... C21
02Y6 ....................................................................................... C22
Y6Y6 ...................................................................................... C22
Y601 ....................................................................................... C23
6Y6Y .............................................................................. C23, C24
6Y02 ....................................................................................... C24
30,000/60,000 PSI — High Pressure (Continued)
(Continued)
Contact Parflex for current price and delivery information on shaded parts.
C1 Parker Hannifin Corporation

FluidConnectors
Adapters
Table of Contents (Continued)

L6Y ........................................................................................ C25
T6Y ........................................................................................ C25
X6Y ........................................................................................ C25
Y4N ........................................................................................ C26
Y4C ........................................................................................ C26
HBPHM .................................................................................. C26
Nipples ................................................................................... C26
Locking Nut and Collar ........................................................... C26
NPT
Couplers ................................................................................. C27
Elbows ................................................................................... C27
Crosses .................................................................................. C28
Tees........................................................................................ C28
Nipples ................................................................................... C29
Reducer Bushings.................................................................. C29
Valves — Medium Pressure
SV5Y ...................................................................................... C30
AV5Y ...................................................................................... C31
TV25Y .................................................................................... C31
TV15Y .................................................................................... C32
CV5Y ..................................................................................... C32
Valves — High Pressure
SV6Y ...................................................................................... C33
AV6Y ...................................................................................... C33
TV26Y .................................................................................... C34
TV16Y .................................................................................... C34
SV6Y ...................................................................................... C35
AV6Y ...................................................................................... C35
TV26Y .................................................................................... C36
TV16Y .................................................................................... C36
CV6Y ..................................................................................... C36

FluidConnectors
Adapters Type M
Type “M” Swivel Hose Fitting and Adapters

Sizes
Determined by hose type.
9/16" - 18 thd
3/4" - 16 thd
7/8" - 14 thd
1" - 12 thd
Swivel Nut 1 5/16" - 12 thd
Adapter
Weep HP Male Cone Insert
Hole
The Type “M” Swivel End Fitting is a swivel nut fitting with a 58° male cone nipple. Each Type “M” Swivel End Fitting is
rated for the full working pressure of the hose.
Advantages:
• Rated for the full working pressure of hose.
• Provides a swivel for quick and easy connection.
• Internal threads and seal are protected from external damage.
• Non rotating seal reduces galling and minimizes tightening torque.
• Can be adapted to almost any connection required.

FluidConnectors
Adapters Type M
YAYA A
Type “M” Male x Type “M” Male
T1 H T2
Part Thread Siz e Thread Siz e A H Maxim um

Num ber T1 T2 O verall Length Hex Siz e Working Pressure
inch inch psi

YAYA-6-6C 9/16" - 18 UNF 9/16" - 18 UNF 1.38 0.63 60,000
YAYA-8-6C 3/4" - 16 UNF 9/16" - 18 UNF 1.63 0.75 30,000
YAYA-8-8C 3/4" - 16 UNF 3/4" - 16 UNF 1.75 0.75 30,000
YAYA-10-6C 7/8" - 14 UNF 9/16" - 18 UNF 1.88 1.00 60,000
YAYA-10-10C 7/8" - 14 UNF 7/8" - 14 UNF 2.00 1.00 60,000
YAYA-11-8C 1" - 12 UNF 3/4" - 16 UNF 1.88 1.00 30,000
YAYA-11-11C 1" - 12 UNF 1" - 12 UNF 1.88 1.00 30,000
YAYA-16-11C 1-5/16" - 12 UNF 1" - 12 UNF 2.13 1.38 20,000
YAYA-16-16C 1-5/16" - 12 UNF 1-5/16" - 12 UNF 2.13 1.38 20,000
YAY6 A
Type “M” Male x High Pressure
T1 H T2
A M axim u m
Part T h read Siz e T h read Siz e Nom . O verall H W o rkin g
N u m b er T1 T2 T u b e Siz e L en g th H ex Siz e Pressu re
in ch in ch p si
YA Y6-6-4C 9/16 - 18 U N F 9/16" - 18 U N F 1/4" H P 1.53 0.63 60,000
YA Y6-6-6C 9/16 - 18 U N F 3/4" - 16 U N F 3/8" H P 1.75 0.75 60,000
YA Y6-6-9C 9/16 - 18 U N F 1-1/8" - 12 U N F 9/16" H P 2.00 1.13 60,000
YA Y6-8-6C 3/4" - 16 U N F 3/4" - 16 U N F 3/8" H P 2.00 0.75 30,000
YA Y6-8-9C 3/4" - 16 U N F 1-1/8" - 12 U N F 9/16" H P 2.25 1.13 30,000
YA Y6-10-6C 7/8" - 14 U N F 3/4" - 16 U N F 3/8" H P 2.25 1.00 60,000
YA Y6-10-9C 7/8" - 14 U N F 1-1/8" - 12 U N F 9/16" H P 2.38 1.13 60,000
YA Y6-11-9C 1" - 12 U N F 1-1/8" - 12 U N F 9/16" H P 2.25 1.13 30,000

FluidConnectors
Adapters Type M
Plugs A
Part Thread Size A H Maximum

Number T1 Overall Length Hex Size Working Pressure
T1 H
inch inch psi
YA6C-PLUG 9/16" - 18 2.07 0.75 60,000
YA8C-PLUG 3/4" - 16 2.13 1.00 30,000
YA11C-PLUG 1" - 12 1.25 1.00 30,000
YA16C-PLUG 1-5/16" - 12 2.63 1.38 20,000
C
A
Caps
Part Thread Size A H Maximum
T1
Number T1 Overall Length Hex Size Working Pressure
inch inch psi

AY6C-CAP 9/16" - 18 0.85 0.69 60,000
AY8C-CAP 3/4" - 16 0.91 1.00 30,000
AY11C-CAP 1" - 12 1.31 1.25 30,000
AY16C-CAP 1-5/16" - 12 1.20 1.50 20,000
A
Torpedos
T2
T1 H
A Maxim um
Part Thread Siz e Thread Size O verall H Working
Num ber T1 T2 Length Hex Size Pressure
inch inch psi

YAY1-8-16C 3/4" - 16 1" - 14 LH 3.56 1.13 20,000
YAY2-8-16C 3/4" - 16 1" - 14 LH 3.56 1.38 20,000
YAY1-11-16C 1" - 12 1" - 14 LH 3.56 1.13 20,000
YAY2-11-16C 1" - 12 1" - 14 LH 3.56 1.38 20,000
YAY1-16-16C 1-5/16" - 12 1" - 14 LH 3.70 1.38 20,000
YAY2-16-16C 1-5/16" - 12 1" - 14 LH 3.70 1.38 20,000

FluidConnectors
Adapters Type M
YAY5 A
Type “M” Male x Medium Pressure
T1
H T2
A Maxim u m
Part T h read Siz e T h read Siz e Nom. O verall H Wo rkin g
Nu m b er T1 T2 T u b e Siz e Len g th Hex Siz e Pressu re
in ch in ch p si
YA Y5-6-4C 9/16" - 18 UNF 7/16" - 20 UNF 1/4" MP 1.56 0.63 20,000
YA Y5-6-6C 9/16" - 18 UNF 9/16" - 18 UNF 3/8" MP 1.63 0.63 20,000
YA Y5-6-9C 9/16" - 18 UNF 13/16" - 16 UN F 9/16" MP 2.00 0.88 20,000
YA Y5-6-12C 9/16" - 18 UNF 3/4" - 14 NPS 3/4" MP 2.32 1.13 20,000
YA Y5-8-6C 3/4" - 16 UNF 9/16" - 18 UNF 3/8" MP 1.88 0.75 20,000
YA Y5-8-9C 3/4" - 16 UNF 13/16" - 16 UNF 9/16" MP 2.20 0.88 20,000
YA Y5-8-12C 3/4" - 16 UNF 3/4" - 14 NPS 3/4" MP 2.44 1.13 20,000
YA Y5-11-6C 1" - 12 UNF 9/16" - 18 UNF 3/8" MP 2.00 1.00 20,000
YA Y5-11-9C 1" - 12 UNF 13/16" - 16 UNF 9/16" MP 2.25 1.00 20,000
YA Y5-11-12C 1" - 12 UNF 3/4" - 14 NPS 3/4" MP 2.44 1.13 20,000
YA Y5-16-9C 1-5/16" - 12 UNF 9/16" - 18 UNF 9/16" MP 2.50 1.38 20,000
YA Y5-16-12C 1-5/16" - 12 UNF 13/16" - 16 UNF 3/4" MP 2.70 1.38 20,000
YA02 A
Type “M” Male x National Pipe Thread (NPT) Female

T2
T1
H
Part Thread Size Thread Size A H Maximum

Number T1 T2 O verall Length Hex Size Working Pressure
inch inch psi

YA02-6-4C 9/16" - 18 UNF 1/4" - 18 NPT 1.50 0.75 15,000
YA02-6-8C 9/16" - 18 UNF 1/2" - 14 NPT 2.00 1.25 15,000
YA02-8-8C 3/4" - 16 UNF 1/2" - 14 NPT 2.00 1.25 15,000
YA02-11-8C 1" - 12 UNF 1/2" - 14 NPT 2.50 1.00 15,000

FluidConnectors
Adapters Type M
YA01 A
Type “M” Male x National Pipe Thread (NPT) Male
T1
H T2
Part Thread Size Thread Size A H Maxim um

Num ber T1 T2 O verall Length Hex Siz e Working Pressure
inch inch psi

YA01-6-2C 9/16 - 18 UNF 1/8" - 27 NPT 1.28 0.63 15,000
C
YA01-6-4C 9/16 - 18 UNF 1/4" - 18 NPT 1.38 0.63 15,000
YA01-6-6C 9/16 - 18 UNF 3/8" - 18 NPT 1.57 0.75 15,000
YA01-6-8C 9/16 - 18 UNF 1/2" - 14 NPT 1.75 0.88 15,000
YA01-8-4C 3/4" - 16 UNF 1/4" - 18 NPT 1.80 0.75 15,000
YA01-8-6C 3/4" - 16 UNF 3/8" - 18 NPT 1.73 0.75 15,000
YA01-8-8C 3/4" - 16 UNF 1/2" - 14 NPT 1.95 0.88 15,000
YA01-8-12C 3/4" - 16 UNF 3/4" - 12 NPT 2.13 1.13 10,000
YA01-8-16C 3/4" - 16 UNF 1" - 11-1/2 NPT 2.38 1.38 10,000
YA01-11-6C 1" - 12 UNF 3/8" - 18 NPT 1.85 1.00 15,000
YA01-11-8C 1" - 12 UNF 1/2" - 14 NPT 2.00 1.00 15,000
YA01-11-12C 1" - 12 UNF 3/4" - 12 NPT 2.13 1.13 10,000
YA01-11-16C 1" - 12 UNF 1" - 11-1/2 NPT 2.38 1.38 10,000
YA01-16-8C 1-5/16" - 12 UNF 1/2" - 14 NPT 2.13 1.38 15,000
YA01-16-12C 1-5/16" - 12 UNF 3/4" - 12 NPT 2.38 1.38 10,000
YA01-16-16C 1-5/16" - 12 UNF 1" - 11-1/2 NPT 2.50 1.38 10,000
YA01-16-20C 1-5/16" - 12 UNF 1-1/4" - 11-1/2 NPT 2.75 1.75 10,000
YA01-16-24C 1-5/16" - 12 UNF 1-1/2" - 11-1/2 NPT 2.75 2.00 10,000
YA01-16-32C 1-5/16" - 12 UNF 2" - 11-1/2 NPT 2.75 2.38 10,000

FluidConnectors
Adapters 20,000 PSI
Medium Pressure Sizes

1/4" O.D. x 0.109" I.D. • 7/16" - 20 male thread on gland nut
3/4" O.D. x 0.44" I.D. • 3/4" - National Pipe Straight male
1" O.D. x 0.56" I.D. • 1-3/8" - 12 male thread on gland nut
Identification is by tubing O.D.
Medium Pressure is a 58/60 degree coned and threaded tubing design. They have a maximum working pressure
rating of 20,000 psi.
Advantages:
• An industry standard for use at elevated pressures.
• Large orifice allows maximum flow of liquids and gases.
• Suitable for repetitive assembly and disassembly.

FluidConnectors
Adapters 20,000 PSI
5YY5 A
Female Medium Pressure to Male Medium Pressure
Part A H Maxim u m
Nu m b er Co n n ection Typ e O verall L en g th Hex Siz e Workin g Pressu re
in ch in ch p si
5YY5-4-6C 1/4" M.P. F emale to 3/8" M.P. Male 1.75 0.75 20,000
5YY5-4-16C
5YY5-6-4C
1/4" M.P. F emale to 1" M.P. Male
3/8" M.P. F emale to 1/4" M.P. Male
3.00
1.75
1.00
0.75
20,000
20,000
C
5YY5-6-16C 3/8" M.P. F emale to 1" M.P. Male 3.12 1.00 20,000
5YY5-16-4C 1" M.P. F emale to 1/4" M.P. Male 2.75 1.75 20,000

FluidConnectors
Adapters 20,000 PSI
5YY6 A
Female Medium Pressure to Male High Pressure
Part A H Maxim u m
in ch in ch p si
5YY6-4-4C 1/4" M.P. F emale to 1/4" H.P. Male 1.37 0.75 20,000
5YY6-4-9C 1/4" M.P. F emale to 9/16" H .P Male 2.12 1.12 20,000
5YY6-6-9C 3/8" M.P. F emale to 9/16" H .P. Male 2.12 1.12 20,000
5YY6-9-9C 9/16" M.P. F emale to 9/16 H .P. Male 2.12 1.12 20,000
5YY6-16-4C 1" M.P. F emale to 1/4" H .P. Male 2.62 1.75 20,000
5YY6-16-6C 1" M.P. F emale to 3/8" H .P. Male 2.87 1.75 20,000
5YY6-16-9C 1" M.P. F emale to 9/16" H.P. Male 3.12 1.75 20,000
A
6YY5
Female High Pressure to Male Medium Pressure
Part A H Maxim u m
in ch in ch p si
6YY5-4-4C 1/4" H .P. F emale to 1/4" M.P. Male 1.75 0.75 20,000
6YY5-4-16C 1/4" H .P. F emale to 1" M.P. Male 3.00 1.00 20,000
6YY5-6-16C 3/8" H .P. F emale to 1" M.P. Male 3.25 1.00 20,000
6YY5-9-4C 9/16" H.P. F emale to 1/4" M.P. Male 2.12 1.37 20,000
6YY5-9-16C 9/16" H.P. F emale to 1" M.P. Male 3.62 1.37 20,000

FluidConnectors
Adapters 20,000 PSI
5Y01 A
Female Medium Pressure to National Pipe Thread (NPT)

Male
Part A H Maxim u m
in ch in ch p si
5Y01-4-2C 1/4" M.P. F emale to 1/8" NPT Male 1.43 0.75 15,000
5Y01-4-8C
5Y01-4-12C
1/4" M.P. F emale to 1/2" NPT Male
1/4" M.P. F emale to 3/4" NPT Male
1.75
1.87
1.00
1.37
15,000
10,000
C
5Y01-4-16C 1/4" M.P. F emale to 1" N PT Male 1.87 1.37 10,000
5Y01-9-2C 9/16" M.P. F emale to 1/8" N PT Male 1.87 1.00 15,000
5Y01-9-16C 9/16" M.P. F emale to 1" NPT Male 1.87 1.37 10,000
5Y01-16-2C 1" M.P. F emale to 1/8" N PT Male 2.50 1.37 15,000
5Y01-16-16C 1" M.P. F emale to 1" NPT Male 2.50 1.37 10,000

FluidConnectors
Adapters 20,000 PSI
02Y5 A
Female NPT to Male Medium Pressure
Part A H Maxim u m
in ch in ch p si
02Y5-2-12C 1/8" N PT F emale to 3/4" M.P. Male 2.00 1.12 15,000
02Y5-2-16C 1/8" N PT F emale to 1" M.P. Male 3.00 1.00 15,000
02Y5-16-6C 1" NPT F emale to 3/8" M.P. Male 2.87 1.87 10,000
02Y5-16-16C 1" NPT F emale to 1" M.P. Male 4.37 1.87 10,000

FluidConnectors
Adapters 20,000 PSI
5Y5Y A
Straight Coupling
Part A H Maxim um
Num ber Connection Type O verall Length Hex Size Working Pressure
inch inch psi

5Y5Y-4-4C 1/4" Medium Pres sure Female 1.62 0.75 20,000
5Y5Y-6-6C 3/8" Medium Pres sure Female 1.75 0.75 20,000
5Y5Y-9-9C 9/16" Medium Press ure Female 2.12 1.00 20,000
5Y5Y-12-12C
5Y5Y-16-16C
3/4" Medium Pres sure Female
1" Medium Press ure Female
2.50
3.50
1.37
1.75
20,000
20,000
C
5Y5Y A
Reducer Coupling
Part A H Maxim um
Num ber Connection Type O verall Length Hex Size Working Pressure
inch inch psi

5Y5Y-4-6C 1/4" M.P. Female to 3/8" M.P. Female 1.75 0.75 20,000
5Y5Y-4-16C 1/4" M.P. Female to 1" M.P. Female 3.50 1.75 20,000
5Y5Y-6-9C 3/8" M.P. Female to 9/16" M.P. Feamle 2.12 1.00 20,000

FluidConnectors
Adapters 20,000 PSI
5Y6Y A
Medium Pressure Female to

High Pressure Female Coupling
Part A H Maxim u m
in ch in ch p si
5Y6Y-4-4C 1/4" M.P. F emale to 1/4" H.P. F emale 1.62 0.75 20,000
5Y6Y-4-9C 1/4" M.P. F emale to 9/16" H .P. F emale 2.37 1.37 20,000
5Y6Y-16-4C 1" M.P. F emale to 1/4" H .P. F emale 3.50 1.37 20,000
5Y6Y-16-6C 1" M.P. F emale to 3/8" H .P. F emale 3.50 1.37 20,000
5Y6Y-16-9C 1" M.P. F emale to 9/16" H.P. F emale 3.50 1.37 20,000

FluidConnectors
Adapters 20,000 PSI
5Y02 A
Medium Pressure Female to NPT Female Coupling
Part A H Maxim u m
in ch in ch p si
5Y02-4-2C 1/4" M.P. F emale to 1/8" NPT F emale 1.62 0.75 15,000
5Y02-4-8C
5Y02-4-12C
1/4" M.P. F emale to 1/2" NPT F emale
1/4" M.P. F emale to 3/4" NPT F emale
2.00
2.37
1.12
1.37
15,000
10,000 C
5Y02-4-16C 1/4" M.P. F emale to 1" N PT Female 2.62 2.00 10,000
5Y02-9-2C 9/16" M.P. F emale to 1/8" N PT F emale 2.12 1.00 15,000
5Y02-9-16C 9/16" M.P. F emale to 1" NPT F emale 2.87 2.00 10,000
5Y02-16-2C 1" M.P. F emale to 1/8" N PT Female 3.00 1.75 15,000
5Y02-16-16C 1" M.P. F emale to 1" NPT F emale 3.75 1.87 10,000

FluidConnectors
Adapters 20,000 PSI
A
Y5Y5
Medium Pressure Male to Medium Pressure Male
Part A H Maxim u m
in ch in ch p si
Y5Y5-4-4C 1/4" M.P. Male to 1/4" M.P. Male 2.00 0.62 20,000
Y5Y5-4-16C 1/4" M.P. Male to 1" M.P. Male 3.62 1.00 20,000
A
Y5Y6
Medium Pressure Male to High Pressure Male
Part A H Maxim u m
in ch in ch p si
Y5Y6-4-4C 1/4" M.P. Male to 1/4" H.P. Male 1.73 0.63 20,000
Y5Y6-6-9C 3/8" M.P. Male to 9/16 H.P. Male 2.50 1.12 20,000
Y5Y6-16-4C 1' M.P. Male to 1/4" H.P. Male 3.62 1.00 20,000
Y5Y6-16-6C 1" M.P. Male to 3/8" H.P. Male 4.00 1.00 20,000
Y5Y6-16-9C 1" M.P. Male to 9/16" H.P. Male 4.00 1.12 20,000

FluidConnectors
Adapters 20,000 PSI
Y501 A
Medium Pressure Male to NPT Male
Part A H Maxim u m
in ch in ch p si
Y501-4-4C 1/4" M.P. to 1/4" NPT Male 1.60 0.63 15,000
Y501-4-8C 1/4" M.P. to 1/2" NPT Male 2.12 0.87 15,000
3/8" M.P. to 1/4" NPT Male 2.06 0.75 15,000
C
Y501-6-4C
Y501-6-6C 3/8" M.P. to 3/8" NPT Male 2.06 0.75 15,000
Y501-6-8C 3/8" M.P. to 1/2" NPT Male 2.18 0.87 15,000
Y501-9-2C 9/16" M.P. to 1/8" N PT Male 2.12 0.87 15,000
Y501-9-4C 9/16" M.P. to 1/4" N PT Male 2.25 0.87 15,000
Y501-9-6C 9/16" M.P. to 3/8" N PT Male 2.25 0.87 15,000
Y501-9-8C 9/16" M.P. to 1/2" N PT Male 2.37 0.87 15,000
Y501-9-12C 9/16" M.P. to 3/4" N PT Male 2.62 1.12 10,000
Y501-9-16C 9/16" M.P. to 1" NPT Male 2.62 1.37 10,000
Y501-12-2C 3/4" M.P. to 1/8" NPT Male 2.37 1.12 15,000
Y501-12-4C 3/4" M.P. to 1/4" NPT Male 2.50 1.12 15,000
Y501-12-6C 3/4" M.P. to 3/8" NPT Male 2.50 1.12 15,000
Y501-12-8C 3/4" M.P. to 1/2" NPT Male 2.62 1.12 15,000
Y501-12-12C 3/4" M.P. to 3/4" NPT Male 2.75 1.12 10,000
Y501-12-16C 3/4" M.P. to 1" NPT Male 3.00 1.37 10,000
Y501-16-2C 1" M.P. to 1/8" NPT Male 3.62 1.00 15,000
Y501-16-4C 1" M.P. to 1/4" NPT Male 3.75 1.00 15,000
Y501-16-6C 1" M.P. to 3/8" NPT Male 3.75 1.00 15,000
Y501-16-8C 1" M.P. to 1/2" NPT Male 3.87 1.00 15,000
Y501-16-12C 1" M.P. to 3/4" NPT Male 3.87 1.12 10,000
Y501-16-16C 1" M.P. to 1" N PT Male 4.00 1.37 10,000
L5Y E
G
Medium Pressure Elbow

H
F
Maxim um
Part Working
Num ber Connection Type Thickness E F G H Pressure
inch inch inch inch inch psi

L5Y-4C 1/4" M.P. 0.75 1.18 1.00 0.87 0.68 20,000
L5Y-6C 3/8" M.P. 0.75 1.37 1.37 1.00 1.00 20,000
L5Y-9C 9/16" M.P. 1.00 1.75 1.75 1.25 1.25 20,000
L5Y-12C 3/4" M.P. 1.37 2.25 2.25 1.50 1.50 20,000
L5Y-16C 1" M.P. 1.75 3.00 3.00 2.06 2.06 20,000

FluidConnectors
Adapters 20,000 PSI
T5Y E
G
Medium Pressure Tee

H
F
Maxim um
Part Working

T5Y-4C 1/4" M.P. 0.62 1.75 1.00 0.87 0.68 20,000
T5Y-6C 3/8" M.P. 0.75 2.00 1.37 1.00 1.00 20,000
T5Y-9C 9/16" M.P. 1.00 2.50 1.75 1.25 1.25 20,000
T5Y-12C 3/4" M.P. 1.37 3.00 2.25 1.50 1.50 20,000
T5Y-16C 1" M.P. 1.75 4.12 3.00 2.06 2.06 20,000
X5Y E
G
Medium Pressure Cross

H
Maxim um
Part Working

X5Y-4C 1/4" M.P. 0.62 1.75 1.37 0.87 0.68 20,000
X5Y-6C 3/8" M.P. 0.75 2.00 2.00 1.00 1.00 20,000
X5Y-9C 9/16" M.P. 1.00 2.50 2.50 1.25 1.25 20,000
X5Y-12C 3/4" M.P. 1.37 3.00 3.00 1.50 1.50 20,000
X5Y-16C 1" M.P. 1.75 4.12 4.12 2.06 2.06 20,000

FluidConnectors
Adapters 20,000 PSI
Y2N Y2C
Medium Pressure Medium Pressure Collar
Gland Nut
Part Maximum Part Maximum
Number Connection Type Working Pressure Number Connection Type Working Pressure
psi psi
Y2N-4C 1/4" M.P. 20,000 Y2C-4C 1/4" M.P. 20,000
Y2N-6C 3/8" M.P. 20,000 Y2C-6C 3/8" M.P. 20,000
Y2N-9C 9/16" M.P. 20,000 Y2C-9C 9/16" M.P. 20,000
Y2N-12C 3/4" M.P. 20,000 Y2C-12C 3/4" M.P. 20,000
Y2N-16C 1" M.P. 20,000 Y2C-16C 1" M.P. 20,000
C
HBPLM
Medium Pressure Plug
Part Maximum
Number Connection Type Working Pressure
psi
HBPLM4-B 1/4" M.P. 20,000
HBPLM6-B 3/8" M.P. 20,000
HBPLM9-B 9/16" M.P. 20,000
HBPLM12-B 3/4" M.P. 20,000
HBPLM16-B 1" M.P. 20,000
Y204, Y206, Y209, Y212 and Y216

Medium Pressure Nipple
1/4" 3/8" 9/16" 3/4" 1"

Length O .D. O .D O .D. O .D. O .D.
2.75" Y204-0275C
3" Y204-0300C Y206-0300C
4" Y204-0400C Y206-0400C Y209-0400C Y212-0400C
6" Y204-0600C Y206-0600C Y209-0600C Y212-0600C Y216-0600C
8" Y204-0800C Y206-0800C Y209-0800C Y212-0800C Y216-0800C
10" Y204-1000C Y206-1000C Y209-1000C Y212-1000C Y216-1000C
12" Y204-1200C Y206-1200C Y209-1200C Y212-1200C Y216-1200C

FluidConnectors
Adapters 30,000/60,000 PSI
High Pressure
Sizes
9/16" O.D. x 0.18" I.D. • 1 1/8" - 12 male thread on gland nut
Identification is by tubing O.D.
High Pressure is a 58/60 degree coned and threaded tubing design. With small bore sizes, they have a maximum
working pressure rating of 60,000 psi.
Advantages:
• An industry standard for use at elevated pressures.
• Suitable for repetitive assembly and disassembly.

FluidConnectors
6YY6
Female High Pressure to Male High Pressure
Part A H Maximum
Number Connection Type Overall Length Hex Size Working Pressure
inch inch psi

6YY6-4-6C 1/4" H.P. Female to 3/8"" H.P. 1.75 0.75 60,000
6YY6-4-9C 1/4" H.P. Female to 9/16" H.P. 2.12 1.12 60,000
C
6Y01
Female High Pressure to Male NPT
Part A H Maximum
inch inch psi

6Y01-4-2C 1/4" H.P. to 1/8" NPT 1.25 0.75 15,000
6Y01-4-4C 1/4" H.P. to 1/4" NPT 1.37 0.75 15,000
6Y01-4-6C 1/4" H.P. to 3/8" NPT 1.37 0.75 15,000
6Y01-4-8C 1/4" H.P. to 1/2" NPT 1.75 1.00 15,000
6Y01-4-12C 1/4" H.P. to 3/4" NPT 1.75 1.37 10,000
6Y01-4-16C 1/4" H.P. to 1" NPT 1.62 1.37 10,000
6Y01-6-2C 3/8" H.P. to 1/8" NPT 1.50 1.00 15,000
6Y01-6-4C 3/8" H.P. to 1/4" NPT 1.62 1.00 15,000
6Y01-6-6C 3/8" H.P. to 3/8" NPT 1.62 1.00 15,000
6Y01-6-8C 3/8" H.P. to 1/2" NPT 1.75 1.00 15,000
6Y01-6-12C 3/8" H.P. to 3/4" NPT 1.87 1.37 10,000
6Y01-6-16C 3/8" H.P. to 1" NPT 1.87 1.37 10,000
6Y01-9-2C 9/16" H.P. to 1/8" NPT 1.50 1.37 15,000
6Y01-9-4C 9/16" H.P. to 1/4" NPT 1.62 1.27 15,000
6Y01-9-6C 9/16" H.P. to 3/8" NPT 1.75 1.37 15,000
6Y01-9-8C 9/16" H.P. to 1/2" NPT 1.87 1.37 15,000
6Y01-9-12C 9/16" H.P. to 3/4" NPT 1.87 1.37 10,000
6Y01-9-16C 9/16" H.P. to 1" NPT 2.00 1.37 10,000

FluidConnectors
A
02Y6
Female NPT to Male High Pressure
Part A H Maximum
inch inch psi

02Y6-2-4C 1/8" NPT to 1/4" H.P. 1.62 0.75 15,000
02Y6-2-6C 1/8" NPT to 3/8" H.P. 1.62 0.75 15,000
02Y6-2-9C 1/8" NPT to 9/16" H.P. 2.12 1.12 15,000
02Y6-4-4C 1/4" NPT to 1/4" H.P. 1.75 0.75 15,000
02Y6-4-6C 1/4" NPT to 3/8" H.P. 1.75 0.75 15,000
02Y6-4-9C 1/4" NPT to 9/16" H.P. 2.12 1.12 15,000
02Y6-6-4C 3/8" NPT to 1/4" H.P. 1.75 1.00 15,000
02Y6-6-6C 3/8" NPT to 3/8" H.P. 1.75 1.00 15,000
02Y6-6-9C 3/8" NPT to 9/16" H.P. 2.12 1.12 15,000
02Y6-8-4C 1/2" NPT to 1/4" H.P. 2.12 1.12 15,000
02Y6-8-6C 1/2" NPT to 3/8" H.P. 2.12 1.12 15,000
02Y6-8-9C 1/2" NPT to 9/16" H.P. 2.12 1.12 15,000
02Y6-12-6C 3/4" NPT to 3/8" H.P. 1.50 1.62 10,000
02Y6-12-9C 3/4" NPT to 9/16" H.P. 2.25 1.37 10,000
02Y6-16-9C 1" NPT to 9/16" H.P. 2.00 2.75 10,000
A
Y6Y6
Male High Pressure to Male High Pressure
Part A H Maximum
inch inch psi

Y6Y6-4-4C 1/4" H.P. to 1/4" H.P. 1.68 0.62 60,000
Y6Y6-4-6C 1/4" H.P. to 3/8" H.P. 2.06 0.75 60,000
Y6Y6-4-9C 1/4" H.P. to 9/16" H.P. 2.25 1.12 60,000
Y6Y6-6-6C 3/8" H.P. to 3/8" H.P. 2.25 0.75 60,000
Y6Y6-6-9C 3/8" H.P. to 9/16" H.P. 2.50 1.12 60,000
Y6Y6-9-9C 9/16" H.P. to 9/16" H.P. 2.62 1.12 60,000

FluidConnectors
A
Y601
Male High Pressure to Male NPT
Part A H Maxim um
Num ber Connection Type O verall Length Hex Siz e Working Pressure
in ch in ch psi
Y601-4-2C 1/4" H.P. to 1/8" NPT 1.87 0.62 15,000
Y601-4-4C 1/4" H.P. to 1/4" NPT 2.06 0.75 15,000
Y601-4-6C 1/4" H.P. to 3/8" NPT 2.00 0.75 15,000
Y601-4-8C
Y601-4-12C
1/4" H.P. to 1/2" NPT
1/4" H.P. to 3/4" NPT
2.12
2.25
0.87
1.12
15,000
10,000 C
Y601-6-4C 3/8" H.P. to 1/4" NPT 2.12 0.87 15,000
Y601-6-6C 3/8" H.P. to 3/8" NPT 2.12 0.87 15,000
Y601-9-4C 9/16" H.P. to 1/4" NPT 2.37 1.12 15,000
Y601-9-6C 9/16" H.P. to 3/8" NPT 2.37 1.12 15,000
Y601-9-8C 9/16" H.P. to 1/2" NPT 2.50 1.12 15,000
Y601-9-12C 9/16" H.P. to 3/4" NPT 2.62 1.12 10,000
Y601-9-16C 9/16" H.P. to 1" NPT 2.75 1.37 10,000
6Y6Y
Straight Coupling
Part A H Maximum
inch inch psi

6Y6Y-4-4C 1/4" H.P. 1.75 1.00 60,000
6Y6Y-6-6C 3/8" H.P. 2.00 1.00 60,000
6Y6Y-9-9C 9/16" H.P. 2.37 1.37 60,000

FluidConnectors
6Y6Y
Reducer Coupling
Part A H Maximum
inch inch psi

6Y6Y-4-6C 1/4" H.P. to 3/8" H.P. 1.62 1.00 60,000
6Y6Y-4-9C 1/4" H.P. to 9/16" H.P. 1.75 1.37 60,000
6Y6Y-6-9C 3/8" H.P. to 9/16" H.P. 2.00 1.37 60,000
6Y02
Female High Pressure to Female NPT Coupling
Part A H Maximum
inch inch psi

6Y02-4-2C 1/4" H.P. to 1/8" NPT 1.50 1.00 15,000
6Y02-4-4C 1/4" H.P. to 1/4" NPT 1.50 1.00 15,000
6Y02-4-6C 1/4" H.P. to 3/8" NPT 1.87 1.00 15,000
6Y02-4-8C 1/4" H.P. to 1/2" NPT 1.87 1.12 15,000
6Y02-4-12C 1/4" H.P. to 3/4" NPT 2.00 1.62 10,000
6Y02-4-16C 1/4" H.P. to 1" NPT 2.50 1.75 10,000
6Y02-6-2C 3/8" H.P. to 1/8" NPT 1.87 1.00 15,000
6Y02-6-4C 3/8" H.P. to 1/4" NPT 1.87 1.00 15,000
6Y02-6-6C 3/8" H.P. to 3/8" NPT 1.87 1.00 15,000
6Y02-6-8C 3/8" H.P. to 1/2" NPT 1.87 1.12 15,000
6Y02-6-12C 3/8" H.P. to 3/4" NPT 2.12 1.37 10,000
6Y02-6-16C 3/8" H.P. to 1" NPT 2.50 1.75 10,000
6Y02-9-2C 9/16" H.P. to 1/8" NPT 2.37 1.37 15,000
6Y02-9-4C 9/16" H.P. to 1/4" NPT 2.37 1.37 15,000
6Y02-9-6C 9/16" H.P. to 3/8" NPT 2.37 1.37 15,000
6Y02-9-8C 9/16" H.P. to 1/2" NPT 2.37 1.37 15,000
6Y02-9-12C 9/16" H.P. to 3/4" NPT 2.37 1.37 10,000
6Y02-9-16C 9/16" H.P. to 1" NPT 2.62 2.00 10,000

FluidConnectors
L6Y
High Pressure Elbow
Maximum
Part Working
Number Connection Type Thickness E F G H Pressure

L6Y-4C 1/4" H.P. 1.00 1.37 1.50 0.87 1.00 60,000
C
L6Y-6C 3/8" H.P. 1.00 1.75 1.50 1.25 1.00 60,000
L6Y-9C 9/16" H.P. 1.50 2.62 1.87 1.12 1.12 60,000
T6Y
High Pressure Tee
Maximum
Part Working

T6Y-4C 1/4" H.P. 1.00 2.00 1.37 1.00 0.87 60,000
T6Y-6C 3/8" H.P. 1.00 2.00 1.56 1.00 1.06 60,000
T6Y-9C 9/16" H.P. 1.50 2.62 2.12 1.62 1.37 60,000
X6Y
High Pressure Cross
Maximum
Part Working

X6Y-4C 1/4" H.P. 1.00 2.00 1.50 1.00 0.75 60,000
X6Y-6C 3/8" H.P. 1.00 2.12 2.00 1.06 1.00 60,000
X6Y-9C 9/16" H.P. 1.50 2.75 2.62 1.37 1.31 60,000

FluidConnectors
Y4N Y4C
High Pressure Gland Nut High Pressure Collar
Part Maximum
Part Maximum
psi
Y4C-4C 1/4" H.P. 60,000
psi Y4C-6C 3/8" H.P. 60,000
Y4N-4C 1/4" H.P. 60,000 Y4C-9C 9/16" H.P. 60,000
Y4N-6C 3/8" H.P. 60,000
Y4N-9C 9/16" H.P. 60,000
HBPHM Nipples
High Pressure Plug High Pressure
Part Maximum Length 1/4" O.D. 3/8" O.D. 9/16" O.D.
Number Connection Type Working Pressure 2.75" Y404-0275C — —
3" Y404-0300C Y406-0300C —
4" Y404-0400C — Y409-0400C
6" Y404-0600C Y406-0600C Y409-0600C
psi 8" Y404-0800C Y406-0800C Y409-0800C
HBPHM4-B 1/4" H.P. 60,000 10" Y404-1000C Y406-1000C Y409-1000C
HBPHM6-B 3/8" H.P. 60,000 12" Y404-1200C Y406-1200C Y409-1200C
HBPHM9-B 9/16" H.P. 60,000
Locking Nut/Collar A
Anti-Vibration
Locking Nut
and Collar Tube A H
Part Number O.D. Length Hex Size
inch inch inch

Y4NC-4C-AV 1/4" H.P. 0.68 0.63
Y4NC-6C-AV 3/8" H.P. 1.06 0.68
Y4NC-9C-AV 9/16" H.P. 1.56 1.68

FluidConnectors
Adapters National Pipe Thread (NPT) 10,000 PSI/15,000 PSI
National Pipe Tapered (NPT)
polyflex™ offers a broad range of high quality

stainless steel high pressure NPT adapters.
Sizes 1/8" to 1/2" are rated up to 15,000 psi, 3/
4" and above are rated to 10,000 psi.
K0202 A
NPT Coupler C
Part A H Maximum
inch inch psi

10K0202-12-12C 3/4" NPT Female 2.13 1.50 10,000
10K0202-16-16C 1" NPT Female 2.50 2.00 10,000
15K0202-2-2C 1/8" NPT Female 1.50 0.75 15,000
15K0202-4-4C 1/4" NPT Female 1.75 0.87 15,000
15K0202-6-6C 3/8" NPT Female 1.75 1.00 15,000
15K0202-8-8C 1/2" NPT Female 2.13 1.25 15,000
E
KL02 G
NPT Elbow
H
F
Part Maximum
Number Connection Type Thickness E F G H Working Pressure

10KL02-12C 3/4" NPT Female 2.05 1.85 1.85 1.35 1.35 10,000
10KL02-16C 1" NPT Female 2.50 3.83 3.83 1.82 1.82 10,000
15KL02-4C 1/4" NPT Female 1.15 1.70 1.70 0.80 0.80 15,000
15KL02-6C 3/8" NPT Female 1.38 1.90 1.90 0.90 0.90 15,000
15KL02-8C 1/2" NPT Female 1.63 2.15 2.15 1.03 1.03 15,000

FluidConnectors
E
KX02 G
NPT Cross
H
Part Maximum

10KX02-12C 3/4" NPT Female 2.05 2.70 2.70 1.35 1.35 10,000
10KX02-16C 1" NPT Female 2.50 3.63 3.63 1.82 1.82 10,000
15KX02-4C 1/4" NPT Female 1.15 1.60 1.60 0.80 0.80 15,000
15KX02-6C 3/8" NPT Female 1.38 1.80 1.80 0.90 0.90 15,000
15KX02-8C 1/2" NPT Female 1.63 2.05 2.05 1.03 1.03 15,000
E
KT02 G
NPT Tee
H
Part Maximum

10KT02-12C 3/4" NPT Female 2.05 2.70 1.85 1.35 2.05 10,000
10KT02-16C 1" NPT Female 2.50 3.63 3.83 1.82 2.50 10,000
15KT02-4C 1/4" NPT Female 1.15 1.60 1.70 0.80 1.15 15,000
15KT02-6C 3/8" NPT Female 1.38 1.80 1.90 0.90 1.38 15,000
15KT02-8C 1/2" NPT Female 1.63 2.05 2.15 1.03 1.63 15,000

FluidConnectors
K0101 A
NPT Nipple
Part A H Maximum
inch inch psi

10K0101-12-12C 3/4" NPT Male 2.44 1.13 10,000
10K0101-16-16C 1" NPT Male 2.75 1.38 10,000
C
15K0101-1-1C 1/16" NPT Male 1.00 0.38 15,000
15K0101-2-2C 1/8" NPT Male 1.20 0.50 15,000
15K0101-4-4C 1/4" NPT Male 1.44 0.63 15,000
15K0101-6-6C 3/8" NPT Male 1.70 0.75 15,000
15K0101-8-8C 1/2" NPT Male 2.25 1.00 15,000
K0201 A
NPT Reducer Bushing
Part A H Maximum
inch inch psi

15K0201-1-8C 1/16" NPT Female to 1/2" NPT Male 1.25 0.87 15,000

FluidConnectors
Adapters Valves
Valves
Medium Pressure — up to 20,000 psi
High Pressure — up to 60,000 psi
Developed to assure safe and easy plumbing through

60,000 psi. These needle valves are engineered to the
highest standards of repeatable quality. The medium
pressure valves are designed with a compact cone-and-
threaded connection which permits the larger bore sizes on request.
and increased flow rates common in this pressure class.
The high pressure valves also use a coned-and-threaded
connection which accommodates the high pressures
Features:
common in these applications.
• Non-Rotating Stem Tips
Non-rotating tip stems are standard for on-off service and
insure long life on valve seats.
• Packing Below Stem Threads
Materials include high tensile type 316 stainless steel

• Type 316 ss high tensile bodies
bodies and hardened 17-4PH stainless steel lower section • Positive gland lock device
stems.
• No stem adjustment needed
Packing is TFE standard with optional Viton®, BUNA-N and
Grafoil available as non-standard. • Black T-handles standard or choice of 4 colors (special
order)
Two Way Straight valves are standard with five additional
patterns to satisfy widely varied requirements are available • Tube sizes
Medium Pressure — 1/4" through 1"
High Pressure — 1/4" through 9/16"
SV5Y
Two Way Straight Valves K
Medium Pressure – 20,000 psi D

J
L
G
F
E
Maximum
Part Working
Num ber Connection Type O rifice Thickness D E F G H J K L Pressure
inch inch inch inch inch inch inch inch psi

SV5Y-12C-20 3/4" Medium Pressure 0.51 1.37 7.00 3.00 0.75 1.50 3.75 0.62 1.75 0.43 20,000
SV5Y-16C-20 1" Medium Pressure 0.68 1.75 8.42 4.12 0.87 1.81 4.62 1.12 2.50 0.56 20,000
SV5Y-9C-20 9/16" Medium Pressur 0.31 1.00 6.12 2.50 0.50 1.12 2.87 0.50 1.37 0.34 20,000

FluidConnectors
Adapters Valves — 20,000 PSI
AV5Y
K
Two Way Angle Valves J
D
Medium Pressure – 20,000 psi L
F
E
Maximum
Part Working
inch inch inch inch inch inch inch inch psi C

AV5Y-4C-20 1/4" Medium Pressure 0.10 0.75 4.81 2.00 1.00 1.25 2.43 0.37 1.25 0.21 20,000
AV5Y-9C-20 9/16" Medium Pressur 0.31 1.00 6.62 2.50 1.25 1.62 3.37 0.50 1.37 0.34 20,000
AV5Y-16C-20 1" Medium Pressure 0.68 1.75 9.37 4.12 2.06 2.56 5.43 1.12 2.50 0.56 20,000
TV25Y
K
Three Way Valves
Medium Pressure – 20,000 psi D L J
Two Pressure Connections H

G
F
M axim u m
Part W o rkin g
N u m b er C o n n ectio n T yp e O rifice T h ickn ess D E F G H J K L Pressu re
in ch in ch in ch in ch in ch in ch in ch in ch p si
T V25Y-4C -20 1/4" M edium Pres s ure 0.10 0.75 5.00 2.00 1.00 1.43 2.62 0.37 1.25 0.21 20,000
T V25Y-16C -20 1" M edium Pres s ure 0.68 1.75 9.75 4.12 2.12 3.06 5.87 1.12 2.50 0.56 20,000

FluidConnectors
Adapters Valves — 20,000 PSI
TV15Y
K
Three Way Valves
Medium Pressure – 20,000 psi D
L
J
One Pressure Connection H
F G
Maximum
Part Working
Number Connection Type Orifice Thickness D E F G H J K L Pressure

TV15Y-4C-20 1/4" Medium Pressure 0.10 0.75 4.81 2.00 1.25 1.25 2.43 0.37 1.25 0.21 20,000
TV15Y-16C-20 1" Medium Pressure 0.68 1.75 9.37 4.12 2.62 2.62 5.43 1.12 2.50 0.56 20,000
A
CV5Y
Ball Check Valves
Medium Pressure
H
Part A H Maxim um
inch inch psi

CV5Y-4C-20 1/4" Medium pres sure 3.75 1.00 20,000
CV5Y-6C-20 3/8" Medium Pressure 3.75 1.00 20,000
CV5Y-9C-20 9/16" Medium Press ure 0.35 1.37 20,000

FluidConnectors
Adapters Valves — 30,000/60,000 PSI
SV6Y
Two Way Straight Valves K
High Pressure – 30,000 psi D

J
L
G
F
E
Maximum
Part Working
SV6Y-4C-30 1/4" High pressure 0.09 1.00

inch
5.18
inch
2.00
inch
0.62
inch
1.00
inch
2.43
inch
0.50
inch
1.37
inch
0.21
psi
30,000 C
SV6Y-6C-30 3/8" High Pressure 0.12 1.00 5.18 2.00 0.62 1.00 2.43 0.50 1.37 0.21 30,000
AV6Y
Two Way Angle Valves K
J

L
F
E
Maximum
Part Working

AV6Y-4C-30 1/4" High pressure 0.09 1.00 5.18 2.00 1.00 1.00 2.43 0.50 1.37 0.21 30,000
AV6Y-6C-30 3/8" High Pressure 0.12 1.00 5.56 2.00 1.00 1.37 2.81 0.50 1.37 0.21 30,000

FluidConnectors
TV26Y
K
Three Way Valves
L
J
Two Pressure Connections H
F G
Maximum
Part Working

TV26Y-4C-30 1/4" High pressure 0.09 1.00 5.18 2.00 0.62 1.00 2.43 0.50 1.37 0.21 30,000
TV26Y-6C-30 3/8" High Pressure 0.12 1.00 5.56 2.00 1.00 1.37 2.81 0.50 1.37 0.21 30,000
TV16Y
K
Three Way Valves
L
J
One Pressure Connection

F G
Maximum
Part Working


FluidConnectors
SV6Y
K
Two Way Straight Valves
L
J
G
F
E
Maximum
Part Working
Number Connection Type O rifice Thickness D E F G H J K L Pressure
SV6Y-4C-60 1/4" High pressure 0.06 1.00

inch
5.18
inch
2.00
inch
0.62
inch
1.00
inch
2.43
inch
0.50
inch
1.37
inch
0.21
psi
60,000 C
AV6Y
K
Two Way Angle Valves J

L
F
E
Maximum
Part Working

AV6Y-4C-60 1/4" High pressure 0.06 1.00 5.18 2.00 1.00 1.00 2.43 0.50 1.37 0.21 60,000

FluidConnectors
TV26Y
K
Three Way Valves
High Pressure – 60,000 psi D L J
Two Pressure Connections

H
G
F
Maxim um
Part Working

TV26Y-6C-60 3/8" High Press ure 0.06 1.00 5.56 2.00 1.00 1.37 2.81 0.50 1.37 0.21 60,000
TV26Y-9C-60 9/16" High Press ure 0.06 1.50 6.06 2.62 1.43 1.87 3.31 0.50 1.37 0.21 60,000
TV16Y K
Three Way Valves
L
J
One Pressure Connection

F G
Maximum
Part Working
Number Connection Type Orifice Thickness D E F G H J K L Pressure

A
CV6Y
Ball Check Valves
High Pressure
H
Part A H Maximum
Number Connection Type O verall Length Hex Size Working Pressure
inch inch psi

CV6Y-4C-60 1/4" High pressure 4.18 1.50 60,000
CV6Y-6C-60 3/8" High Pressure 4.25 1.50 60,000
CV6Y-9C-60 9/16" High Pressure 4.62 1.56 60,000

FluidConnectors
High Pressure Quick Couplings
Table of Contents
Rogan Series —
30,000 psi Maximum Working Pressure
HP006 Coupler .......................................................................... D3
HP006 Nipple (without Check Valve) .........................................D4
HP006 Nipple (with Check Valve) .............................................. D5
HP010 Coupler .......................................................................... D6
HP010 Nipple (without Check Valve) .........................................D7
HP010 Nipple (with Check Valve) .............................................. D8
C Series Hydraulic Couplers —
115 Coupler ............................................................................. D10
D
115 Nipple ............................................................................... D11
116 Coupler ............................................................................. D12
116 Nipple ............................................................................... D13
125 Coupler ............................................................................. D13
125 Nipple ............................................................................... D14
Adapters .................................................................................. D15
WB Series Waterblast Couplers —
WB Coupler ............................................................................. D17
WB Nipple ............................................................................... D17
D1 Parker Hannifin Corporation

FluidConnectors
High Pressure Quick Couplings Rogan Series
Rogan Series
A versatile connecting device that permits easy and rapid joining of hose assemblies to your system. Each
coupling is assembled and pressure tested to at least 5,000 psi above its maximum rated working pressure.
Couplings with check-valve can withstand the full working pressure in the disconnected condition.
Max. Working Test Nominal Thru

Type Pressure Hole Diameter
Pressure
(psi) (psi) (in)
HP006 30,000 35,000 0.24

HP010 20,000 25,000 0.40
NOTE: The choice of the threaded end form may limit the working pressure and the size of the thru hole in the coupling.
Call polyflex™ for additional information.

FluidConnectors
HP006
Coupler
Part A H Maxim um
inch inch psi

HP006-0-A9 Type "M" (9/16" - 18 threads ) 3.30 1.19 30,000
HP006-0-A12 Type "M" (3/4" - 16 threads) 3.34 1.19 30,000
HP006-0-HM4 1/4" High Pressure Male 3.46 1.19 30,000
HP006-0-HM9 9/16" High Press ure Male 3.70 1.19 30,000
HP006-0-LM6 3/8" Medium Press ure Male 3.54 1.19 20,000
HP006-0-NFB 1/4" NPT Female 3.30 1.19 15,000
HP006-0-NFC 3/8" NPT Female 3.30 1.19 15,000
HP006-0-NMB 1/4" NPT Male 3.40 1.19 15,000
HP006-0-NMC
HP006-0-NMD
3/8" NPT Male
1/2" NPT Male
3.30
3.45
1.19
1.19
15,000
15,000 D
HP006-0-X13 Low Angle Fac e Seal (9/16" - 18 threads 3.37 1.19 30,000
A A A
H H H
HP006-0-HM4 HP006-0-LM6 HP006-0-HM9
A A A
H H H
HP006-0-A9, HP006-0-X13 HP006-0-NMB,

HP006-0-A12 HP006-0-NMC,
HP006-0-NMD
A
HP006-0-NFB,
HP006-0-NFC
FluidConnectors
HP006
Nipple
Without Check Valve
Part A H Maxim um
inch inch psi

HP006-1-LM9 9/16" Medium Pres sure Male 2.57 1.00 20,000
HP006-1-NMB 1/4" NPT Male 2.09 0.75 15,000
HP006-1-NMC 3/8" NPT Male 2.13 0.75 15,000
HP006-1-NMD 1/2" NPT Male 2.31 1.00 15,000
A A A
H
H H
HP006-1-HM4 HP006-1-LM6, HP006-1-A9,

HP006-1-LM9 HP006-1-A12
A A
H
H
HP006-1-X13 HP006-1-NMB,
HP006-1-NMC,
HP006-1-NMD

FluidConnectors
HP006
Nipple
With Check Valve
Part A H Maxim um
inch inch psi

HP006-2-NFB 1/4" NPT Female 3.26 1.19 15,000
HP006-2-NFC 3/8" NPT Female 3.25 1.19 15,000
D
HP006-2-NMB 1/4" NPT Male 3.34 1.19 15,000
HP006-2-NMC 3/8" NPT Male 3.34 1.19 15,000
HP006-2-NMD 1/2" NPT Male 3.43 1.19 15,000
A A A
H H
H
HP006-2-HM4 HP006-2-LM6 HP006-2-A9,

HP006-2-A12
A A A
H H H
HP006-2-X13 HP006-2-NMB, HP006-2-NFB,

HP006-2-NMC, HP006-2-NFC
HP006-2-NMB

FluidConnectors
HP010
Coupler
Part A H Maxim um
inch inch psi

HP010-0-A12 Type "M" ( 3/4" - 16 threads ) 4.00 1.62 20,000
HP010-0-A16 Type "M" (1" - 12 threads ) 4.10 1.62 20,000
HP010-0-NFD 1/2" NPT Female 4.27 1.62 15,000
HP010-0-NMD 1/2" NPT Male 4.13 1.62 15,000
HP010-0-X23 Low Angle Fac e Seal (3/4" - 16 threads) 4.19 1.62 20,000
A A A
H H
H
HP010-0-A12, HP010-0-X23 HP010-0-NFD

HP010-0-A16
A A
H H
HP010-0-NMD HP010-0-LM12

FluidConnectors
HP010
Nipple
Without Check Valve
Part A H Maxim um
inch inch psi

HP010-1-LM9 9/16" Medium Pres sure Male 2.84 1.06 20,000
HP010-1-NMD 1/2" NPT Male 2.52 1.06 15,000
A A
H
H
HP010-1-A12, HP010-1-LM9,
HP010-1-A16 HP010-1-LM12
A A
H
H
HP010-1-X23 HP010-1-NMD

FluidConnectors
HP010
Nipple
With Check Valve
Part A H Maxim um
inch inch psi

HP010-2-NFD 1/2" NPT Female 4.14 1.62 15,000
HP010-2-NMD 1/2" NPT Male 4.13 1.62 15,000
A A
H H
HP010-2-A12,
HP010-2-X23
HP010-2-A16
A A
H H
HP010-2-NFD
HP010-2-NMD

FluidConnectors
High Pressure Quick Couplings C Series
C Series
D
Features:
• Working pressures to 29,000 psi.

• Non-drip valving for clean, safe, trouble-free performance and minimal air inclusion.
• Built-in safety locking device to prevent accidental disconnect.
• Wide range of threaded styles NPT, BSP and “High Pressure”.
• Adaptors for ease of connection to high pressure hoses and fixed ports.
• Thread sizes from 1/8" to 3/8"
• Protective dust caps are included to prevent damage and fluid contamination in disconnected position.
• Rugged design and construction for long life in demanding applications.
Applications:
• Torque Tensioning • Spreaders Max.
• Stud Tensioning • Cable Cutters Working Test Nominal Thru
Pressure Pressure Hole Diameter
• Rescue • Nut Splitters Type (psi) (psi) (in.)
• Bearing Pullers • Pipe Coupling Swegers
• Intensifers • Presses C Series 115 14,500 21,800 0.11
• Hydrostatic Testing • Clamping Fictures
C Series 116 21,800 29,200 0.11
• Pumps • Crimpers
• Jacks • Blow-out Preventers C Series 125 29,800 36,300 0.11
NOTE: The choice of the threaded end form may limit the working pressure and the size of the thru hole in the coupling.

FluidConnectors
115
Coupler
Part A H Maximum
inch inch psi

C10-115-1202 1/4" BSP Female (thru type) 2.30 0.94 14,500
C10-115-1222 1/4" BSP Female (with built-in locking device 2.30 0.94 14,500
C10-115-1401 1/8" NPT Female 2.30 0.94 14,500
C10-115-1402 1/4" NPT Female 2.30 0.94 14,500
C10-115-1404 3/8" NPT Female 2.38 0.94 14,500
C10-115-1422 1/4" NPT Female (with built-in locking device 2.30 0.94 14,500
C10-115-1452 1/4" NPT Male 2.45 0.94 14,500
C10-115-1454 3/8" NPT Male 2.45 0.94 14,500
A A A
H H H
C10-115-1202 C10-115-1222 C10-115-1401
A A A
H H H
C10-115-1402 C10-115-1404 C10-115-1422
A A
H H
C10-115-1452 C10-115-1454

FluidConnectors
115
Nipple
Part A H Maximum
inch inch psi

C10-115-6202 1/4" BSP Female 1.47 0.87 14,500
C10-115-6204 3/8" BSP Female 1.56 0.94 14,500
C10-115-6401 1/8" NPT Female 1.42 0.87 14,500
C10-115-6402 1/4" NPT Female 1.42 0.87 14,500
C10-115-6404 3/8" NPT Female 1.46 0.94 14,500
C10-115-6452 1/4" NPT Male 2.40 0.87 14,500
C10-115-6454 3/8" NPT Male 2.55 0.94 14,500
D
A A A
H H H
C10-115-6202 C10-115-6204 C10-115-6401
A A A
H H H
C10-115-6402 C10-115-6404 C10-115-6452
C10-115-6454

FluidConnectors
116
Coupler
Part A H Maximum
inch inch psi

C10-116-1202 1/4" BSP Female 2.30 0.94 21,800
C10-116-1222 1/4" BSP Female (with built-in locking device 2.30 0.94 21,800
C10-116-1402 1/4" NPT Female 2.30 0.94 15,000
C10-116-1422 1/4" NPT Female (with built-in locking device 2.30 0.94 15,000
A A
H H
C10-116-1202 C10-116-1222
A A
H
H
C10-116-1402
C10-116-1422

FluidConnectors
116
Nipple
Part A H Maximum
inch inch psi

C10-116-6202 1/4" BSP Female 1.47 0.87 21,800
C10-116-6402 1/4" NPT Female 1.41 0.87 15,000
D
A A A
H H H
C10-116-5202 C10-116-6202 C10-116-6402
125
Coupler
Part A H Maximum
inch inch psi

C10-125-1202 1/4" BSP Female 2.65 0.94 29,000
C10-125-1202
FluidConnectors
125
Nipple
Part A H Maximum
inch inch psi

C10-125-6202 1/4" BSP Female 1.50 0.87 29,000
C10-125-5202,
C10-125-6202

FluidConnectors
Quick Coupling Adapters
A
Overall Length
inch inch psi

C09-125-1680 1/4" BSP 120° external cone x 1/4" HP Male 1.72 0.67 29,000
C19-950-0029 1/4" BSP 120° external cone x 9/16" UNF Hose 1.48 0.67 29,000
C19-950-0062 1/4" BSP Rubber Metal Seal 0.08 0.81 14,500
C19-950-0064 3/8" BSP Rubber Metal Seal 0.08 0.94 14,500
C19-950-1600 1/4" BSP 120° external cone Blind Plug 1.07 0.67 29,000
C19-950-1601 1/4" BSP x 1/4" BSP with 120° external cones 1.76 0.08 29,000
C19-950-1602 1/4" BSP 120° external cone x 1/4" BSP 60° internal cone 1.54 0.83 29,000
C19-950-1622 1/4" BSP x 1/4" BSP with 60° internal cones 1.25 0.83 29,000
C19-950-1623 1/4" NPT Male x 1/4" BSP with 60° internal cone 1.27 0.83 14,500
C19-950-1680 Porting Block 1.80 29,000
HAHM4BM4 1/4" BSP with 60° internal cone x 1/4" HP Male 1.47 0.83 30,000 D
Note: Using A Rubber Metal Seal Reduces The Working Pressure To 14,500 psi
A A A A
H H H
H
C09-125-1680 C19-950-0029 C19-950-0062, C19-950-1600

C19-950-0064
A A A A
H H H H
C19-950-1601 C19-950-1602 C19-950-1622 C19-950-1623
A A
A/2
H H
C19-950-1680 HAHM4BM4
FluidConnectors
High Pressure Quick Couplings WB Series
WB Series
Applications
Parker’s WB Series couplings are designed for equipment
used in cleaning applications such as paint removal or mill
scale. The 10,000 psi operating pressure of the WB series
makes it ideal for applications that require a high pressure
coupling with minimal pressure drop.
Features
• Push-to-Connect allows for quick, easy connections by
elminiating the need to retract the sleeve to couple.
Specifications
• Locking collets in the female half maintain 360 degree
contact with male half to evenly distribute load and Body Size 1/2"
reduce brinelling.
Temperature Range -40°F to +250°F (-40°C to +121°C)
• Zinc plating with yellow chromate finish resists corrosion.
Maximum
• Straight through design allows for excellent flow with low Operating Pressure 10,000 PSI (69 MPa)
pressure drop. Rated Flow 45 GPM (170 LPM)
• Two knurled bands on the sleeve provide good gripping
for operation of sleeve to disconnect.
• Sleeve Lock design prevents accidental disconnects.

• Stainless steel collets resist corrosion and provide
smooth latching action.
• Teflon® backup washer ensures sealing integrity at high

pressure.
• Induction hardened locking groove on the male half

reduces wear and brinelling.
• Sleeve guard prevents accidental disconnect and seals

the opening between the sleeve and the body from the
environment.

FluidConnectors
High Pressure Quick Couplings WB Series
125
WB Coupler
A C D
Part O verall B Largest Turned Maximum
Number Connection Type Length Hex Size Diameter Diameter Working Pressure
inch inch inch inch psi

WB-501-8FP 1/2-14 NPTF 2.10 1.25 1.25 1.25 10,000
D C
D
WB-501-8FP
125
WB Nipple
E F H
Part O verall Exposed G Largest Maximum
Number Connection Type Length Length Hex Size Diameter Working Pressure
inch inch inch inch psi

WB-502-8FP 1/2-14 NPTF 2.35 1.26 1.13 1.63 10,000
WB-502-8FP

FluidConnectors
High Pressure Quick Couplings Notes

FluidConnectors
Accessories
Table of Contents
Heavy Duty Abrasion Cover ................................................... E2
Heavy Duty Abrasion Cover Sleeves...................................... E2
Spring Guards ........................................................................ E2
Containment Grips ................................................................. E2
Support Grips ........................................................................ E3
Bend Restrictors .................................................................... E3
Anti-Gall Lubricant ................................................................. E3
Pressure Containment Shield ................................................. E3
Dies, HP Fittings .................................................................... E4
Dies, HP Guards .................................................................... E4
Gauges, HP Fittings ............................................................... E4 E
Dies, polyflex BOP Hose Fittings ........................................ E4
Karrykrimp .................................................................................. E5
Parkrimp I and II ......................................................................... E5
E1 Parker Hannifin Corporation

FluidConnectors
Accessories HD Abrasion Cover, Spring Guards, Grips
Heavy Duty Abrasion Cover Spring Guards
Part No. Description Part No. Description
MHDC010 5/8" I.D. Clear Vinyl MSG060 0.60" I.D. Continuous Spring
MHDC011 5/8" I.D. Clear Vinyl with white Helix reinforcement MSG1006 For 2040N-04V00 Hose
MHDC012 3/4" I.D. Clear Vinyl with white Helix reinforcement MSG2006 For 2245N-04V00 Hose
MHDC014 7/8" I.D. Clear Vinyl with white Helix reinforcement MSG2106 For 2380N-04v00 Hose
MHDC016 1" I.D. Clear Vinyl with white Helix reinforcement MSG4113 For -8 Hoses
MHDC018 1-1/8" I.D. Clear Vinyl with white Helix reinforcement MSG4120 For 2440n-12V37 Hose
MHDC020 1-1/4" I.D. Clear Vinyl with white Helix reinforcement MSG4125 For 2440N-16V37 Hose
MHDC022 1-3/8" I.D. Clear Vinyl with white Helix reinforcement MSG6020 For 2640N-12v32 Hose
MHDC024 1-1/2" I.D. Clear Vinyl with white Helix reinforcement
MHDC026 1-5/8" I.D. Clear Vinyl with white Helix reinforcement
MHDC032 2" I.D. Clear Vinyl with white Helix reinforcement
Heavy Duty Abrasion Containment Grips

Cover Sleeves
Part No. Abrasion Cover Used O n... Part No. Description
508-J-500-10 MHDC010, MHDC011 MCG001SS For Hose O.D. 0.38" - 0.69"

510-A-500-12 MHDC012 For Hose O.D. 1.0" - 1.56"
MCG002SS
612-400-14 MHDC014
MCG003SS For Hose O.D. 1.25" - 1.94"
216-200-18 MHDC016, MHDC018
MCG005SS For Hose O.D. 0.75" - 1.25"
620-100-18 MHDC018 (w/2640N-08 hose)
MCGHS10-15 For Hose O.D. 0.40" - 0.59"
220-200-22 MHDC022, MHDC024
MCGHS15-20 For Hose O.D. 0.59" - 0.79"
520-A-500-26 MHDC026
MCGHS20-30 For Hose O.D. 0.79" - 1.18"
MCGHS30-40 For Hose O.D. 1.18" - 1.57"
MCGHS40-50 For Hose O.D. 1.57" - 1.96"
MCGHS50-60 For Hose O.D. 1.96" - 2.36"
Black Eagle® Support Grip

Part No. Description
MCG014-02-1523 For Hose O.D. 2.25" - 2.94"

MSG014-02-1524 For Hose O.D. 2.75" - 3.44"

FluidConnectors
Accessories Bend Restrictors, Lubricant, Burst Shield
Support Grips Bend Restrictors
MK022-03-038 For Hose O .D. 0.63" - 0.74"

MK022-03-039 For Hose O .D. 0.75" - 0.99" MBR003 Molded Vinyl 0.25" I.D.
MK022-03-043 For Hose O .D. 1.50" - 1.74"
MBR009 Molded Vinyl 0.562" I.D.
MK022-03-045 For Hose O .D. 2.25" - 2.49"
MBR013-B Molded Plastic for 2840D-03V32 hose E
MBR2104 Molded Vinyl for 2244N-025V00 hose
HG8X-04 Molded Plastic for 2380N-4Vxx hose
ThreadMate™ Pressure Safety Shield

Anti-Gall Lubricant
MTM04T 4-oz Tube

* MHBS012 3/4" I.D. Rubber Safety Shield
612-400-14 Pressure Safety Shield Retaining Sleeve
• ThreadMate is an extreme duty lubricant developed to reduce
M55STIF4 Pressure Safety Shield Stiffener HP Tube Fitting
galling during the assembly of threaded parts.
M55STIF6 Pressure Safety Shield Stiffener Type "M" Fitting
• ThreadMate promotes reliable sealing of pipe threads even at
high pressure by reducing friction and galling during tightening, * Designated for the 2740D-03V30 and the 2840D-03V34 Hoses.
resulting in higher contact pressures of the sealing surfaces, and
better metal-to-metal contact. ** MHBS016 1" I.D. Pressure Safety Shield
• ThreadMate reduces the torque needed to make pressure tight 416-400-16 Pressure Safety Shield Sleeve
connections and tighten fasteners. ** Designated for the 2740D-05V32 and the 2840D-05V32 Hoses.

FluidConnectors
Accessories Dies – HP Guards, HP Safety Guards
Dies, HP Fittings Dies, HP Guards
80C-HP3 Dies for HP3 Fittings 80C-G 03 Dies for HP3 G uards
Gauges, HP Fittings Dies for polyflex Hose

- 2390N Hose Series
- 2245N Hose Series
- 57CR Seawolf TM
Part No. Description
HP-3-G auge G auge for HP-3 Fittings

Part No. Description Fitting Series
Hose Types Series

83C-9X04 2390N-04 9x
83C-9X08 2390N-08 9X
83C-9X16 2390N-16 9X
80C-F04G 2245N-04V00 55
80C-F06G 2245N-06V00 58
80C-F08G 2245N-08V00 58
80C-F10G 2245N-10V30 58
80C-F12G 2245N-12V30 58
83C-F16G 2245N-16V30 58
80C-F08W 57CRN-08V CR
83C-F16W 57CRN-16v CR

FluidConnectors
Accessories Karrykrimp II, Parkrimp I & II, and Superkrimp
Parkrimp I Parkrimp II
Parkrimp I offers hose Parkrimp II provides you with total
assembly capability through capability to manufacture hydraulic hose
1-1/4", SAE 100R1, 100R2, assemblies up through 2". Parkrimp II’s
100R7, 100R8, 100R9 and advanced design – with capacity to
100R14. Its patented design handle 100R1 through 100R14 hose
provides you with the ability types, coupled with straight or bent tube
to crimp straight – as well ends – is the industry’s leading edge in
as bent tube hose ends; a the manufacture of hydraulic hose
full power return cycle assemblies. Unparalleled in its design,
allows quick, easy size and Parkrimp II needs no special adjust-
hose type changes, while ments or gauge settings. Simply insert
the die pusher automatically moves out of the way for easy the unitized or split die train for the
die insertion: Bench mounted at a 20° angle lets you load appropriate size – and with push
and unload hydraulic assemblies as easily as possible. button ease you have factory-quality
Parkrimp I gives you the ease and flexibility to manufacture assemblies in just seconds.
hydraulic hose assemblies you require – and in less than
Part No. 83C-081-PFD
ten seconds.
Part No.
80C-001-PFD ........... Machine with power unit, silver die ring and
dies 80C-P04, P06, P08, P12
E
80C-081-PFD ........... Machine with power unit and without silver die
ring and dies
80C-R01-PFD .......... Silver die ring
MiniKrimp™
Standard Equipment
Model 94C-001-PFD includes:
Part Number Part Description
94C-080-PFD MiniKrimp™ Portable Crimping Machine
015301 Hand Pump
82C-R01-PFD Die Ring – Color Coded Silver
Optional Equipment
Part Number Part Description
015736 Side Vise Mount
015306 Upright Table Mount
015307 Upright Vise Mount
82C-R02-PFD Die Ring – Color Coded Black
015309 Hose Assembly
015308 Replacement Tube Assembly w/o Fittings

FluidConnectors
Accessories Notes

FluidConnectors
Technical Information
Table of Contents
polyflex Hose — Determination of Length
of Hose for Over-the-Sheave Applications......................... F2
Installation Tips ..................................................................... F3
Recommended Practice for Selection, Installation,
and Maintenance of polyflex Hose Assemblies ................. F4
Dash Size Systems for Hose and Tubing .............................. F5
Selection of Hose Diameter .................................................. F6
Twin/Multi-Line Separation Instructions ................................. F8
Volumetric Expansion Data ................................................... F9
Pressure Drop vs. Flow ....................................................... F10
Government & Agency Approvals ....................................... F15
Glossary .............................................................................. F16
Gas Permeability of Plastics................................................ F17 F
Recommended Tightening Procedures ............................... F18
Metric Conversions ............................................................. F19
Chemical Resistance .......................................................... F20
Parker Safety Guide ............................................................ F25
F1 Parker Hannifin Corporation

FluidConnectors
Technical Information Installation Tips
Installation Tips
polyflex Hose —
Determination of Length of Hose for Over-the-Sheave Applications
The exact cutoff length for an optimum over-the-sheave
assembly depends on the particular mechanical arrange-
ment of the machine. A method for finding an approximate
starting point is as follows:
1. Assemble hose with one coupling as shown in diagram.
2. Measure hose length from point 1 to point 2 with hose

taut. (Lo = length)
3. Calculate hose cutoff or free length LF:

LF = 0.985 Lo + 2x
Where LF includes coupling insert allowance on both
ends. The coupling insert allowance (x) may be found
from the coupling dimension tabulations in the fittings
sections section of this fitting section or from direct
measurement on the coupling. A 1.5% stretch allowance
is provided in this formula.
4. Couple the remaining hose end and assemble on the

machine.

FluidConnectors
Technical Information Installation Tips
right
wrong
wrong
right
Hose is weakened when installed in twisted position. Also, Hose should exit coupling in a straight position rather than
pressure pulses in twisted hose tends to fatigue wire and side loaded. Ample bend radius should be provided to avoid
loosen fitting connections. Design so that machine motion collapsing of hose and flow restriction. Exceeding minimum
produces bending rather than torsion. bend radius will greatly reduce hose assembly life.
wrong
F
right
right
wrong
When hose assembly is installed in a flexing application, Use elbows or other adapters as necessary to eliminate
remember that metal hose fittings are not part of the flexible excess hose length and to ensure neater installation for
portion. Allow ample free length for flexing. easier maintenance.
right
wrong
wrong
right
Pressure can change hose length as much as ±3%. Provide Avoid installing hose line close to exhaust manifold or any
slack in line to compensate for hose length changes. other hot section. If possible, isolate hose with fireproof
boot or other protective means.

FluidConnectors
Technical Information Selection, Installation & Maintenance
Recommended Practice for Selection, Installation,

and Maintenance of polyflex Hose and Hose Assemblies
Hose and hose assemblies have a finite life span and many things reduce this time. This recommended practice should be
read by designers and users of hose to assist them in the proper selection of hose. These guidelines, while not all inclusive,
will assist the user in maintaining hydraulic and pneumatic systems.
READ THE PARKER SAFETY GUIDE CONTAINED IN THIS CATALOG IN ITS ENTIRETY.
PART ONE – How to Select Hose PART TWO – Installation and Maintenance
• Pressure – Maximum operating pressure of the hose • Inspect components – Check hose for cover cracks,
must be greater than or equal to the system pressure. blisters, cleanliness, kinks, cracks or core tube obstruc-
Pressure surges or system “spikes” in excess of the tions or other defects. Examine fittings for poor threads,
maximum operating pressure will shorten hose life and obstructions, cracks, rust. Do not use hose or fittings if
must be avoided. these problems exist.
• Temperature – Ambient and fluid temperatures must not • Assemble per instructions contained in this catalog.
exceed the hose/fittings rated design temperature.
Attempt to route hose or shield hose from high tempera- • Do not exceed specified minimum bend radius – Use
ture sources. stress relievers to prevent sharp bends at the hose and
fitting juncture. These can be spring guards or other
• Size – Adequately size hose and fittings to avoid damag- stress relieving members.
ing hose with excessive turbulence, or heat build-up,
while maintaining proper flow and pressure. (Refer to fluid • Ensure that hose bends rather than twists with
velocity nomogram.) equipment motion.
• Fluid compatibility – Refer to Chemical Compatibility • Use a torque wrench or the flats from finger tight
Guide in this catalog for use of fluids with various method to properly install port connections.
materials. If unsure of an application, contact the factory.
Additional care must be taken with gaseous applications. • After installation, eliminate air entrapped in system,
(See Safety Guide at end of catalog.) pressurize to maximum operating pressure, and
check for leaks and proper system function.
• Environment – Conditions such as ozone, UV light,
harsh chemicals, salt water, and other airborne contami- • After installation, periodically (frequency depends on
nants can degrade hose and shorten its life. severity of application and potential risk) inspect the
system for the following:
• Length – Hose length changes with pressure. This, along
1. Blistered, degraded, or loose hose covers.
with equipment movement, must be considered in the
system design. 2. Stiff, cracked, or charred hose.
• Proper couplings – Always follow manufacturers 3. Cuts or abrasion of hose. Look for exposed reinforce-
specifications and do not mix components of different ment.
manufacturers. 4. Leaks in hose or fittings.
• Mechanical loads – Conditions such as tensile and side 5. Damaged or corroded fittings.
loads, vibration, excessive flexing, and twist will reduce 6. Excessive build up of dirt, grease, oils, etc.
hose life. Use swivel fittings and adapters to avoid hose
twisting. Test the hose if the application is potentially 7. Defective or broken clamping devices, shields.
problematic or unusual. 8. Kinks in hoses.
• Electrical conductivity – Determine if the hose must be Upon discovery of any of these items, replace it, repair it,
non-conductive to prevent electrical current flow or but DO NOT IGNORE IT!
conductive to dissipate static electricity. Choose hose and
fittings accordingly. (See Safety Guide for Electrical • Retest the system after all maintenance procedures.
Conductivity issues.)
• Establish replacement schedules based on previous
service life, or when failures could result in damage,
personal injury, excessive or unacceptable downtime.

FluidConnectors
Technical Information Dash Size Systems for Hose and Tubing
Dash Sizes
Dash sizes are commonly used to designate hose I. D., plastic tubing and metal tubing O. D. and coupling size.
Dash size systems in common use:
Dash Number Nominal

Nominal Hose I. D. Dash Number for DIN
or Tubing O. D. for all polyflex Hose TFE Hose Size
Inches Millimeters
3/32 2.0 -012

1/8 3.2 -2 – –
3/16 4.8 -3 -4 5
1/4 6.3 -4 -5 6
5/16 7.9 -5 -6 8
3/8 9.5 -6 – 10
13/32 10.3 -6.5 -8 –
1/2 12.7 -8 -10 12

5/8 15.9 -10 -12 16 F
3/4 19.1 -12 – 20
7/8 22.2 -14 -16 –

1 25.4 -16 – 25
1-1/8 28.6 – -20 –
1-1/4 31.8 -20 – 32

1-3/8 34.9 – -24 –
1-1/2 38.1 -24 – 40
1-13/16 46.0 – -32 –

2 50.8 -32 – 50

FluidConnectors
Technical Information Selection of Hose Diameter
Selection of Hose Diameter from Flow Rate and Velocity

The Fluid Velocity Nomogram gives the velocity of a liquid or gas as a function of flow rate and inside diameter of
the fluid line. The commonly recommended maximum velocities for hydraulic oil systems at 200°F or less are
indicated for guidance.
Example: At 10 gpm, what is the minimum size within the recommended velocity range
for a hydraulic pressure line?
The dashed line drawn from the 10 gpm mark on the left hand line to the maximum velocity of 20 fps intersects
the middle line at .438 " (7/16" I. D. hose or tubing).
For a hose application, use 1/2" I. D., the nearest common standard size.
This chart is based on the following formulas: vfps = .321Q , Q = gal per min
þd2 d = hose or tube I. D. (inch)
4
cu. ft./min. = .1337 Q

The cu. ft. per min. value is the actual volume flow rate under flowing conditions.
For air, standard cfm of free air = 7.81 actual cfm when the inlet air is at 100 psig, 68°F.

FluidConnectors
Technical Information Selection of Hose Diameter
Determination of Pressure Drop in the Line

Q W q
Velocity: v = .409 = .0509 =
d2 pd 2 .785d 2
dvp W qp
Reynold’s Number: Re = 124 µ = 6.31 dµ = 378 dµ
Pressure Drop, Isothermal, Incompressible Flow (Liquids):

2 2 2
ΔP = .001 294 fL p v = .000 00336 fLW = .0121 fL q
d pd5 d5
Pressure Drop, Isothermal, Compressible, Long Lines (Gases and Vapors):
ΔP = 1 – 1– fLp 1 v12
P1 √ 12 g d P1
Symbols and Units for Listed Formulas
F
d = inside diameter of hose, inches
f = friction coefficient, dimensionless
g = gravitational constant, 32.2 ft./sec.2
P1 = input pressure, psi
ΔP = pressure difference, psi
q = rate of flow at flowing condition, cu. ft./min.
Q = rate of flow, gals./min.
Re = Reynolds number, dimensionless
v = flow velocity, ft./sec.
W = rate of flow, lbs./hr.
p = weight density of fluid, lbs./cu. ft.
µ = absolute (dynamic) viscosity, centipoises

FluidConnectors
Technical Information Twin/Multi-Line Separation Instructions
Twin Line and Multi-Line Separation Instructions
1. Position twinned or multi-line hose 2. Measure and mark the length that the 3. Lightly lubricate the web area
assembly so that it lies flat on work hoses are to be separated. Note: if between the hoses. Distribute the
surface without tendency to twist or length of separation is specified from the lubricant uniformly along the web of
turn. threaded or swivel nut end of coupling, the assembly to be separated. Parker
deduct the cutoff allowance dimension Hoze-Oil or any lightweight oil will
for the specific style of coupling used. suffice. (SAE 10 or 20) The function of
The cutoff allowance is obtainable from the oil is to reduce the friction of the
the hose fitting tables found in the hose knife blade so that it naturally seeks the
fitting tables or can be calculated by center of the valley formed by the hoses.
subtracting the insertion depth of the This eliminates the need for the operator
shell from the overall coupling length. to steer the knife.
NOTE:
• It is important that the knife blade be
perpendicular to the hose during this pro-
cedure so that the blade cuts only the
center line of the web. EXTREME CARE
MUST BE TAKEN TO AVOID CUTTING
THROUGH THE COVER OF THE
4. Press the multi-line hose HOSES AND THEREBY EXPOSING
assembly firmly and flat against THE FIBER REINFORCEMENT. If this
the work surface with your free occurs, the hose assembly must be dis-
hand so that it does not move. carded. (see photo A.)
Using a Stanley trimming knife 5. It is suggested that the separation
If the separation length is greater than
model No. l0-5l5 or equivalent, length be sufficiently long so that the
that which can be accomplished with one
draw the knife toward you with swaging or crimping operation can be
continuous, smooth stroke, then the pro-
constant light to moderate accomplished without risk of kinking the
cedure should be repeated over shorter
pressure, and a smooth stroke. hoses or tearing the web which could
distances always cutting toward the free
Three or four strokes will be result in exposure of the braided
end of the hoses.
necessary to separate the hoses. reinforcement. (see photo B)
DON'T
A DON'T B
6. At the option of the assembler as EXTREME CARE MUST BE TAKEN The separation length must allow for the
dictated by the installation, it is TO AVOID CUTTING THROUGH THE swaging or crimping operation without
suggested that a nylon lashing strap COVER OF THE HOSES AND THEREBY damaging the hose.
or tape be applied at the termination EXPOSING THE REINFORCEMENT.
of the separated length to provide If this occurs, the hose assembly must
protection against tearing of the web be discarded.
or hose covers.

FluidConnectors
Technical Information Volumetric Expansion Data/Hose Fitting Guide
Volumetric Expansion Data For HP/HP8 Thermoplastic Hose

▲ indicates hose working pressure)
(▲
10.00
-6
VOLUMETRIC EXPANSION (cc/ft.)
-4
-3
1.00
HP/HP8 SERIES
0.10
500 1500 2500 3500 4500 5500 6500 7500 8500 9500
PRESSURE (psi)

FluidConnectors
Technical Information Pressure Drop vs. Flow
For Hose Types:

2040N-02V00 (1003 K)
2020N-02V30 (1003 MK)
2240D-02V32 (2003 STR)
3mm Hose Pressure drop
3000
2500
Pressure drop (psi)
2000
100'
1500
1000 50'
25'
500
0
0 1 2 3 4
Flow rate (gpm)
For Hose Types:

2240D-025V34 (2004 STR) 2440D-025V37 (4004 ST)
2243D-025V70 (2004 STV) 2640D-025V32 (6004 ST)
2244N-025V00 (2104 ST) 2740D-025V30 (6104 ST)
5000
4500
4000
100'
Pressure drop (psi)
3500
3000
2500
50'
2000
1500 25'
1000
500
0
0 2 4 6 8
Flow rate (gpm)
Results obtained from actual pressure drop tests, pumping water through hose assemblies with normal end fittings.

FluidConnectors
For Hose Types:

2240D-03V32 (2005 STS) 2440D-03V37 (4005ST)
2245D-03V32 (2005 STR) 2640D-03V32 (6005 ST)
2243D-03V70 (2005 STV) 2740D-03V30 (6105 ST)
5000
4500
4000
Pressure drop (psi)
3500
100'
3000
2500
2000 50'
1500
25'
1000
500
0
2 4 6 8 10 12 14
Flow rate (gpm)
F
For Hose:
2840D-03V34 (8005 ST)
8005St Hose Pressure drop
5000
4500
4000
Pressure drop (psi)
3500
3000
100'
2500
2000 50'
25'
1500
1000
500
0
0 2 4 6 8
Flow rate (gpm)

FluidConnectors
For Hose Types:

2245N-04V00 (2006 ST) 2380N-04V00 (2106 ST)
2380N-04V33 (2006 STA) 2380M-04V00 (ChemJec)
390N-04V00 (2206 ST) 2240D-04V32 (2006 STS)
2440N-04V37 (4006ST) 2X90N-04V14 (Red Snake)
2440M-04V30 (ChemJec)
5000
4500
4000
Pressure drop (psi)
3500
3000
2500 100'
2000
1500 50'
1000 25'
500
0
5 10 15 20
Flow rate (gpm)
For Hose Types:

2240N-05V32 (2008 STS) 2440D-05V37 (4008 ST)
2380F-05V07 (FEP) 2640D-05V32 (6008 ST)
2380M-05V30 (ChemJec) 2740D-05V32 (6108 ST)
2440M-05V30 (ChemJec) 2840D-05V32 (8108 ST)
4000
3500
3000
Pressure drop (psi)
2500 100'
2000
50'
1500
25'
1000
500
0
5 10 15 20 25 30
Flow rate (gpm)

FluidConnectors
For Hose Types:

2245N-06V30 (2010 ST) 2X90N-06V14 (Red Snake)
2390N-06V13 (2210 ST) 2440N-06V91 (4110 STN)
4000
3500
3000 100'
Pressure drop (psi)
2500
2000 50'
1500 25'
1000
500
0
10 15 20 25 30 35 40 45
Flow rate (gpm)
F
For Hose Types:
2245N-08V30 (2013 ST) 2380F-08V07
2244N-08V10 (2113 ST) 2440N-08V37 (4113 ST)
2390N-08V13 ( 2213 ST) 2640N-08V32 (6013 ST)
2X90N-08V14 (Red Snake) 2840D-08V30 (8013 ST)
2000
1800
1600
Pressure drop (psi)
1400
1200
1000
800 100'
600
50'
400 25'
200
0
10 15 20 25 30 35 40 45 50
Flow rate (gpm)

FluidConnectors
For Hose Types:

2380F-12V07 (FEP) 2245N-12V30 (2025 ST)
2390N-12V03 (2220 ST) 2440N-12V37 (4120 ST)
2640N-12V32 (6020 ST) 2X90N-12V34 (Red Snake)
2000
1800
1600
Pressure drop (psi)
1400 200'
1200
1000
800 100'
600 50'
400 25'
200
0
40 50 60 70 80 90 100 110 120
Flow rate (gpm)
For Hose Types:

2245N-16V30 (2025 ST)
2390N-16V13 (2225 ST)
2440N-16V37 (4125ST)
2000
1800
1600 200'
Pressure drop (psi)
1400
1200
1000 100'
800
50'
600
25'
400
200
0
60 80 100 120 140 160 180 200
Flow rate (gpm)

FluidConnectors
Technical Information Government & Agency Approvals
Agency and Specifications Approved polyflex Products

Hydraulic Service:
SAE 100R10 2244N/2380N
DIN (Deutsches Institur Für Normung):

DIN 20022 Part 1 (Performance Requirements) 2040N
DIN 20022 Part 2 2040H, 2245N/2244N
Electrical Non-Conductivity:
SAE J517, Pitman E-00094 HP8
DNV:
Cert. No. P-8934, P-8936, P-10271, P-10410 HP, HP8
Cert. No. P-9785 2040N, 2380N

FluidConnectors
Technical Information Glossary
Abrasion Pressure Effects

Abrasion occurs in numerous forms; two of the more Pressure surges and system shocks (spikes) are common
common are the typical rubbing or chafing, with the in hydraulic systems. The normal 4:1 safety factor should
second being very high frequency, low amplitude friction. reflect these transient pressures. Where these surges and
This type of abrasion results from pump pressure pulses shocks are considered severe or hazardous, the safety
otherwise known as pump ripple. It can also be caused by factor should be increased.
equipment vibration or resonance. Abrasion may occur
When hose is under pressure, it may change in length by
when two hose lines cross or when a hose line rubs or
as much as ±3%. Installation should compensate for
bears against a fixed point. Abrasion resistance is also a
shortening by providing an appropriate amount of slack
function of temperature and attack of the cover material by
and for lengthening by allowing space for this growth to be
aggressive chemicals.
absorbed.
Spring guards or other protective sleeving can also ward
off premature hose failure resulting from abrasion. Spring Routing and Clamping
guards also distribute bending force often associated with Whenever possible, and maximum efforts should be made
excessive side loading or even kinking at the skirt of the to do so, hose should be routed to flex in a single plane.
coupling. Routing hoses in flexure through compound bends results
in torsions. When this is unavoidable, the torsion should
Ambient Temperature be distributed over the maximum hose length possible.
Exceedingly high or low ambient temperatures will affect Wire reinforced hoses suffer the most rapid and severe
the materials from which the hose is constructed and will loss of service life when applied in torsion. Extremely tight
negatively influence hose life. When at all possible, the and improperly located clamps focus this torsion over
hose should be routed in such a manner as to protect it short distances.
from heat sources. In extreme cold applications, the
Analysis of the hose function is required before the proper
equipment should be designed with remote relief valves to
clamping techniques can be selected. In some applica-
allow circulation and warming of the oil before hose
tions, hoses must be contained to stay out of harm's way
articulation is attempted. The hose liner (core tube) of
and at the same time be free to come and go with equip-
choice for extremely high or low temperature is Teflon®.
ment articulation. Other applications may require restric-
Teflon® is serviceable at temperatures as low as -100°F
tive clamping, in which case a protective material should
and as high as +450°. Consult the specific hose operating
be used around the hose to provide the grasp without
parameters for more information.
deformation of the hose by the clamp. These techniques
Bend Radius also apply to the use of the popular method of clamping
The minimum bend radii listed in this catalog are valid at and clustering hoses with plastic tie straps.
rated working pressures and indicated service tempera- Parker swivel adaptors feature 360° swiveling action that
tures. Service life of a hose may be shortened if the especially suits them for use in applications where hose
minimum radius is exceeded or if the hose is flexed moves, bends or twists. Swivel adapters connected to
continuously in use. hose assemblies relieve twisting, prevent excessive
flexing of hose, eliminate need for long radius bends, and
Burst Pressure and Working Pressure cushion intraline shock caused by peak system pressure
The specified burst pressure for each hose style and dash pulses.
size are for unaged hoses tested at normal laboratory
temperature in accordance with SAE J343 specification High Pressure Adapters
for normal service and technically ideal installations. The It is critical that the adapter material be properly suited to
maximum recommended working pressure is 1/4 of the the fluid media. Widely varying conditions frequently
minimum rated burst pressure, except as otherwise necessitate high pressure adapters constructed of
specifically stated in those product specifications. For materials other than conventional 316 stainless steel.
more severe service, a higher rated working pressure Since many variables affect the corrosion resistance of
hose may have to be selected. metallic materials, it is Parker Hannifin’s policy not to
recommend materials based on corrosion resistance for
Hose Installation Tips specific fluid applications. The published recommended
Establish hose size (I. D.) and style based upon flow rate working pressure represent the capability of the subject
(GPM), pressure drop, and chemical compatibility with fluid fitting. Nevertheless, in some instances, the hose, hose
medium. Other significant factors to be considered in hose fitting or other connector assembled to the adapter may
selection and installation are discussed briefly as follows: dictate the maximum working pressure. The end-user
should read and understand the Parker Safety Guide
Operating Temperature
(Bulletin 4400-B.1) and follow its suggested practices and
The temperature range for satisfactory service (maximum
warnings.
hose life) depends to a great extent upon the fluid being
conveyed. Use of a hose above maximum specified
temperature ratings will shorten hose life due, but not
limited, to oxidation, chemical degradation and loss of
compression within the coupling.

FluidConnectors
Technical Information Gas Permeability of Plastics
Permeability Coefficient = V
AxTxp
Where: V is the volume of gas, in cm3, which diffuses through a 1mm thickness.
A is the area across which the gas diffuses, in m2.
T is the diffusion time, in days.
p is the pressure difference across the plastic, in bar.
Permeability Coefficients per DIN 53380

Gas
Material
N2 O2 CO2 H2 He
PTFE 50 150 1500 — 3500

PVDF 3 2 10 — 60
PA-6 XE 3289 1 4 10 100* 60*
PA-6 A 28 NZ 0.5 2 5 50* 30*
PA-12 L 2124 — 30 180 210 160
PA-12 P40 TL — — 105 — —
PA-12 L 25W40 8 35 150 1000* 500* F
PA-12 L 2140 — 12 71 — 130
PA-11 P 40 TL — — 55 130 —
PA-11 POTL 2 20 65 65 —
POM H 2320 5 10 130 35 40
POM 150 SA 2 4 20 — —
PEE 4055 150 — 3000 — 1400
PEE 5556 120 — 1600 — 900
PEE 7246 — — — — 300
* Calculated value. Diffusion constants based on normal room temperature. Actual behavior mat vary
considerably because of variations in processing the plastic.

FluidConnectors
Technical Information Recommended Tightening Procedures
Tightening
Connection Thread Sizes Torque (ft. Lb)
High Pressure
1/4" 9/16" - 18thd 25
3/8" 3/4" - 16thd 50
9/16" 1-1/8" - 12thd 75
Medium Pressure
1/4" 7/16" - 20thd 20
3/8" 9/16" - 18thd 30
9/16" 13/16" - 16thd 85
3/4" 3/4" NPSM 90
1" 1-3/8" - 12thd 125
Type “M” Swivel
A9 9/16" - 18thd 25-30
A12 3/4" - 16thd 40-50
A14 7/8" - 14thd 50-60
A16 1" - 12thd 75-85
A21 1-5/16 - 12thd 100-120
Fitting Adapter Adapter Your

Swivel Nut Cone Surface Cone Surface Equipment
Port
Weep Fitting Nipple Adapter

Hole Cone Surface
Leakage at Swivel Nut-to-Adapter Joint Leakage at Type “M” Adapter-to-Port

(Seen by leak at weep hole in swivel nut) (Seen by leak at weep hole in pressure port,or leak
at threads for NPT adapters.)
1. Reduce system pressure to zero
1. Reduce system pressure to zero.
2. Unscrew swivel nut and check cone surfaces of
adapter and hose insert. 2. Slacken Hose Swivel Nut.
3. If hose insert is damaged, return hose to 3. Tighten Adaptor into Port.

polyflex for repair and retest.
4. Re-tighten Swivel Nut.
4. If cone surfaces look good after cleaning,
re-tighten swivel nut. Do not exceed 150% Never use the swivel nut to tighten the adapter into
of recommended torque. the port.

FluidConnectors
Technical Information Metric Conversions
Metric Conversion Chart

English to Metric Metric to English
To Convert From To Multiply To Convert From To Multiply
sq. in. (in2) sq. mm (mm2) 645.16
Area sq. in. (in2) sq. cm (cm2) 6.4516 sq. mm (mm2) sq. in. (in2) 0.00155
2 2
sq. ft. (ft ) sq. meters (m ) 0.0929
Kilograms/cubic Kilograms/cubic
Density pounds/cubic foot (lb/ft3) meter 16.02 meter pounds/cubic foot (lb/ft3) 0.0624
(kg/m3) (kg/m3)
British Thermal Units (Btu)

Energy joules (J) 1055 joules (J) British Thermal Units (Btu) 0.000947
(1 J = Ws = 0.2388 cal)
pounds - force (lbf)

Force newtons (N) 4.448 newtons (N) pounds - force (lbf) 0.2248
(1N = 0.102 kgf)
inches (in) millimeters (mm) 25.4 millimeters (mm) inches (in) 0.03937
Length feet (ft) meters (m) 0.3048 meters (m) feet (ft) 3.281
miles (mi) kilometers (km) 1.609 kilometers (km) miles (mi) 0.621
ounces (oz.) grams (g) 28.35 grams (g) ounces (oz.) 0.035
Mass
pounds - mass (lb) kilograms (kg) 0.4536 kilograms (kg) pounds - mass (lb) 2.205
(Weight)
short tons (2000 lb) (tn) metric tons (1000 kg) 0.9072 metric tons (1000 kg) short tons (2000 lb) (tn) 1.102
Power horsepower (550 ft. lb/s) (hp) kilowatts (kW) 0.7457 kilowatts (kW) horsepower (550 ft. lb/s) (hp) 1.341
kilograms (f)/square kilograms (f)/square F
pounds/square inch (psi) cm 0.0703 cm pounds/square inch (psi) 14.22
Pressure (kg(f)/cm2) (kg(f)/cm2)
pounds/square inch (psi) kilopascals (kPa) 6.8948 kilopascals (kPa) pounds/square inch (psi) 0.145
pounds/square inch (psi) bars (100 kPa) 0.06895 bars (100 kPa) pounds/square inch (psi) 14.503
pounds/square inch (psi)
Stress megapascals (MPa) 0.006895 megapascals (MPa) pounds/square inch (psi) 145.039
(1N/mm2 = 1MPa)
5/9 (after
9/5 (then
Temperaturedegrees Fahrenheit (°F) degrees Celsius (°C) subtracting degrees Celsius (°C) degrees Fahrenheit (°F)
add 32)
32)
Torque or pounds-force-foot (lb-ft) Newtons-meter (Nm) 1.3567 Newtons-meter (Nm) pounds-force-foot (lb-ft) 0.737
Bending
Moment pounds-force-inch (lb-in) Newtons-meter (Nm) 0.113 Newtons-meter (Nm) pounds-force-inch (lb-in) 8.85
Velocity feet/seconds (ft/s) meters/second (m/S) 0.3048 meters/second (m/S) feet/seconds (ft/s) 3.2808
dynamic (centipoise) Pascal-second (Pas) 0.001 Pascal-second (Pas) dynamic (centipoise) 1000
Viscosity 2 2 2 2 2 2 2 2
kenematic-foot /sec (ft /s) meter /sec (m /s) 0.0929 meter /sec (m /s) kenematic-foot /sec (ft /s) 10.7643
cubic centimeter cubic centimeter
cubic inch (in3) (cm3) 16.3871 (cm3) cubic inch (in3) 0.061
Volume (milliliter) (milliliter)
quarts (qt) liters (1000 cm3) 0.9464 liters (1000 cm3) quarts (qt) 1.057
gallons (gal) liters 3.7854 liters gallons (gal) 0.2642

FluidConnectors
Technical Information Chemical Resistance
Ratings Code:
G – Good to excellent. Little or no swelling, tensile or surface changes. Preferred choice.
L – Marginal or conditional. Noticeable effects but not necessarily indicating lack of
serviceability. Further testing suggested for specific application. Very long-term effects
such as stiffening or potential for crazing should be evaluated.
P – Poor or unsatisfactory. Not recommended without extensive and realistic testing.
— – Indicates that this was not tested.
# – For Teflon. Indicates good chemical resistance but potential for excessive permeation.
Polyester Polyoxy- Fluorinated- Proprietary

Elastomer Polyamide methylene ethylene Fluoropolymer Polyurethane Polyamide
"H" "N" "POM" "F" "M" "U" "N"
Core Tube Core Tube Core Tube Core Tube Core Tube Hose Covers Hose Covers
2040H 2020N 2240D 2380F 2380M 2040N 2020N
2370H 2040N 2243D 2440M 2244N 2240D
2244N 2245D 2640M 2245N 2243D
2245N 2440D 2380F 2245D
2380N 2640D 2380N 2245N-8
2390N 2740D 2390N 2245N-12
2440N 2840D 2440N-32V10 2245N-16
2640N 2640N-24V80 2380N-04V33
2X90N 2640N-32V80 2440D
2X90N 2440N
2640D
2640N
2740D
2840D
Notes on the Chemical Resistance Table

(1) The fluid resistance tables are simplified rating tabulations based on immersion tests at 24° C. Higher
temperatures tend to reduce ratings. Since final selection depends on pressure, fluid and ambient
temperature and other factors not known to Parker Hannifin , no performance guarantee is expressed
or implied. The indications do not imply any compliance with standards and regulations and do not refer to
possible changes of colour, taste or smell. For food and drinking water specially approved materials have to
be used. For fluids not listed or for advice on particular applications, please consult Parker Hannifin, Polyflex
in Stafford, TX.
(2) Hose applications for these fluids must take into account legal and insurance regulations. The chemical
resistance indicated does not express or imply approval by certain institutions.
(3) Satisfactory at some concentrations and temperatures, unsatisfactory at others.
(4) For gas applications, the cover should be pin-pricked and the pressure must not be released quickly. Special
safety guard accessories are to be used to prevent damage or personal injury in the event of failure..
(5) Chemical resistance does not imply low permeation rates. Please consult Parker Hannifin for a recommendation
for your specific requirements.
(6) The indication of chemical resistance does not imply any special food compatibility; it refers only to the
chemical resistance of the material.
(7) Chemical resistance does not imply acceptability for use in airless paintspray applications. These applications
require a special, electrically conductive hose.

FluidConnectors
Chemical H N U POM FEP
Acetaldehyde G L L — G
Acetic Acid Glacial L L L — L
Acetone L G P L G
Acetylene 2 2 2 — 2
Air (4) G G G G G
Ammonium Chloride G P G — L
Ammonium Hydroxide L G P — G
Anhydrous Ammonia P P P — 8
Aniline P P P — G
Animal Oils (6) G G G — —
Aromatic Hydrocarbons L G L — —
Asphalt G G G — L
Baygon (insecticide) L G P — —
Beer G G G — G
Benzene L G L — G
Brake Fluid (DOT #3) — G P L —
Butane (2) (4) G G L — #
Butter (6) G G G — —
Calcium Chloride G 3 G — G
Carbon Dioxide (4) G G G — # F
Carbon Monoxide (4) G 3 G — #
Carbon Tetrachloride L G P — G
Castor Oil G L L — —
Chlordane (Insecticide) L G P — —
Chlorinated Hydrocarbon Base Fluids L G L — —
Chlorinated Petroleum Oil G G L — —
Chlorinated Solvents P 3 P — #
Chlorine, Gaseous, Dry P P P — —
Chloroform P P P — G
Chromic Acid P 3 P — L
Citric Acid Solutions G G L — G
Crude Petroleum Oil G G G G —
Cyclohexane (2) G G G — G
Cygon (Insecticide) L G P — —
Diazion (insecticide) L G P —
Diesel Fuel (2) G G G G —
Diester Oils L G P — —
Enamels G G G — —
Ethanol (6) G G L G —
Ethers L G P P G
Ethylene Glycol G G L G G
Ethylene Oxide G G L — #
Fatty Acids G G 3 — G
Formaldehyde L L P — G
Formic Acid J P P P — G

FluidConnectors
Freon 12 (5) P G L — #
Freon 22 (5) P G L — #
Fruit Juices G G G — —
Fuel Oil (2) G G L G G
Gas (Oil) (2) G G G — —
Gas (Natural) (4) — — — — 2
Gasoline (2) G G 3 — G
Glue 3 3 3 — 3
Glycerin G G L — G
Glycols (to 135°F) G G L G G
Grease (petroleum base) G G G G —
Heptachlor (insecticide) L G P — —
Hexane (2) G G G — G
Houghto Safe-600 Series —
(hydraulic fluid) G G L — —
Houghto Safe-1000 Series —
(phosphate esters) L G P — —
Hydraulic Fluid (petroleum base) G G G G L
Hydraulic Fluid (phosphate ester base) L G L — —
Hydraulic Fluid (water glycol base) G G G — —
Hydraulic Oil (petroleum base) G G G G L
Hydrochloric Acid P L P — G
Hydrofluoric Acid P P P — G
Hydrogen, Gaseous (2) (4) (5) G G G — #
Hydrolube —
(hydraulic fluid/water glycol base) G G L — —
IRUS 902 —
(hydraulic fluid/water-oil emulsion) G G G — —
Isocyanates (2) L L L — —
IsoOctane (2) G G G — G
Isopropyl Alcohol G G L — G
Kerosene (2) G G L — G
Ketones L G P — G
Lacquer Solvents L G P — L
Lactic Acid P G P — G
Lime (calcium oxide) G G G — G
Lindol —
(hydraulic fluid\phosphate esters) L G P — —
Linseed Oil G G G G G
LP - Gas 2 2 2 — 2
Lubricating Oils (diester base) L G P — —
Lubricating Oils (petroleum base) G G G G G
Magnesium Hydroxide L G L — G
Magnesium Salts — G G — —
Malathion (insecticide) L G P —

FluidConnectors
Mercury G G G — G
Meropa Oil (sulphur base) G G — — —
Methane 2 2 2 — 2
Methanol G G P — —
Methoxychlor (insecticide) L G P — —
Methyl Alcohol (6) G G P G G
Methylene Chloride — — — — G
Methyl Ethyl Ketone (MEK) L G P L G
Methyl Ethyl Ketone Peroxide (MEKP) — L P — —
Methyl Isobutyl Ketone (MIBK) L G P — G
Methylene Chloride P L P P
Milk (6) G G G — G
Mineral Oil G G G G G
Mineral Spirits P — L — —
Motor Oils G G G — G
Naphtha L G P G G
Natural Gas (4) 2 2 2 — 2
Nitric Acid P P P — L
Nitrobenzene P G P — G
Nitrogen, Gaseous (4) (5) G G G — G F
Nitrous Oxide — L — — #
Oil (SAE) G G G G —
Oil of Turpentine G G P — —
Oleic Acid G G G — G
OS 45 Type 3 Hydraulic Fluid
(silicate esters) L G L — —
Oxygen, Gaseous (4) (5) (6) G G G — G
Ozone L P L — G
Paint (Oil Base) (7) G G G — —
Paint Solvents (oil base) L G L — —
Pentane (2) G G L — G
Perchloric Acid P P P — L
Perchloroethylene P P P L —
Petroleum Ether — 2 2 — 2
Petroleum Oils G G G — —
Phenols P P P — —
Phosphate Esters (above 135°F) P G P — —
Phosphate Esters (to 135°F) G G P — —
Polyol Esters L G P — —
Potassium Hydroxide, 50% P P P — G
Propane (4) (5) 2 2 2 — 2
Propylene Glycol — — G — G
Pydraul 312C, 625 (to 135°F) P G P — —
Pydraul F-9, 150, 160 (to 135°F) G G P — —
Quintolubric 822 Fluid — G G — —

FluidConnectors
Salt Water 3 3 3 — G
Sevin (insecticides in water) G G G — —
Silicone Greases G G G — —
Silicone Oils G G G — —
Skydrol 500 & 7000 L G P — G
Soap Solutions G G G — G
Soda Water G G G — —
Sodium Borate G G G — G
Sodium Carbonate 3 3 3 — 3
Sodium Chloride Solutions G G G — G
Sodium Hydroxide, 50% L P P — G
Sodium Hypochlorite L P P — G
Steam P P P — G
Stoddard Solvent P G P — G
Straight Synthetic Oils
(phosphate esters) L G P — —
Sulfur G G G — G
Sulfur Dioxide P L L — G
Sulfur Hexafluoride Gas (4) (5) G G G — —
Sulphuric Acid P P P — —
Toluol, Toluene L G L G G
Toluol L G L — —
Transmission Fluid G G G L —
Trichloroethylene P L P — G
Trisodium Phosphate Solutions L G P — G
Turpentine G G L — G
Ucon
(hydraulic fluid-water glycol base) G G L — —
Varnish G G G G —
Vinegar (6) L G L — G
Water (to 135°F) (6) G G G G G
Water (above 135°F) (6) P G P — L
Water Glycols (to 135°F) G G L — —
Water Glycols (above 135°F) P G P — —
Water in oil Emulsions (to 135°F) G G L G —
Water in oil Emulsions (above 135°F) P G P — —
Whiskey, Wines (6) G G L — G
Wood Oils G G L G —
Xylene L G P G G
Zinc Chloride G G G — G

FluidConnectors
Technical Information Parker Safety Guide
Parker Safety Guide

for Selecting and Using Hose, Tubing, Fittings, and Related Accessories
Parker Publication No. 4400-B.1
Revised: May 2002
WARNING: Failure or improper selection or improper use of hose, tubing, fittings, assemblies or related accessories (“Products”)
can cause death, personal injury and property damage. Possible consequences of failure or improper selection or improper use of
these Products include but are not limited to:
• Fittings thrown off at high speed. • Contact with conveyed fluids that may be hot, cold, toxic or
• High velocity fluid discharge. otherwise injurious.
• Explosion or burning of the conveyed fluid. • Sparking or explosion caused by static electricity buildup or
• Electrocution from high voltage electric power lines. other sources of electricity.
• Contact with suddenly moving or falling objects that are • Sparking or explosion while spraying paint or flammable
controlled by the conveyed fluid. liquids.
• Injections by high-pressure fluid discharge. • Injuries resulting from inhalation, ingestion or exposure to
fluids.
• Dangerously whipping Hose.
Before selecting or using any of these Products, it is important that you read and follow the instructions below. Only Hose from Parker’s
Stratoflex Products Division is approved for in flight aerospace applications, and no other Hose can be used for such in flight applications.
1.0 GENERAL INSTRUCTIONS The following are considerations for electrically nonconductive and con-
1.1 Scope: This safety guide provides instructions for selecting and using (in- ductive Hose. For other applications consult the individual catalog pages
cluding assembling, installing, and maintaining) these Products. For conve- and the appropriate industry or regulatory standards for proper selection.
nience, all rubber and/or thermoplastic products commonly called “hose” or 2.1.1 Electrically Nonconductive Hose: Certain applications require that the
“tubing” are called “Hose” in this safety guide. All assemblies made with Hose be nonconductive to prevent electrical current flow or to maintain
Hose are called “Hose Assemblies”. All products commonly called “fittings” electrical isolation. For these applications that require Hose to be electri-
or “couplings” are called “Fittings”. All related accessories (including crimp- cally nonconductive, including but not limited to applications near high volt-
ing and swaging machines and tooling) are called “Related Accessories”. age electric lines, only special nonconductive Hose can be used. The manu-
This safety guide is a supplement to and is to be used with, the specific
Parker publications for the specific Hose, Fittings and Related Accessories
facturer of the equipment in which the nonconductive Hose is to be used
must be consulted to be certain that the Hose and Fittings that are selected F
that are being considered for use. are proper for the application. Do not use any Parker Hose or Fitting for any
1.2 Fail-Safe: Hose, and Hose Assemblies and Fittings can and do fail without such application requiring nonconductive Hose, including but not limited to
warning for many reasons. Design all systems and equipment in a fail-safe applications near high voltage electric lines, unless (i) the application is
mode, so that failure of the Hose or Hose Assembly or Fitting will not en- expressly approved in the Parker technical publication for the product, (ii)
danger persons or property. the Hose is marked “nonconductive”, and (iii) the manufacturer of the equip-
ment on which the Hose is to be used specifically approves the particular
1.3 Distribution: Provide a copy of this safety guide to each person that is
Parker Hose and Fitting for such use.
responsible for selecting or using Hose and Fitting products. Do not select
or use Parker Hose or Fittings without thoroughly reading and understand- 2.1.2 Electrically Conductive Hose: Parker manufactures special Hose for cer-
ing this safety guide as well as the specific Parker publications for the prod- tain applications that require electrically conductive Hose.
ucts considered or selected. Parker manufactures special Hose for conveying paint in airless paint spray-
1.4 User Responsibility: Due to the wide variety of operating conditions and ing applications. This Hose is labeled “Electrically Conductive Airless Paint
applications for Hose and Fittings, Parker and its distributors do not repre- Spray Hose” on its layline and packaging. This Hose must be properly con-
sent or warrant that any particular Hose or Fitting is suitable for any specific nected to the appropriate Parker Fittings and properly grounded in order to
end use system. This safety guide does not analyze all technical param- dissipate dangerous static charge buildup, which occurs in all airless paint
eters that must be considered in selecting a product. The user, through its spraying applications. Do not use any other Hose for airless paint spraying,
own analysis and testing, is solely responsible for: even if electrically conductive. Use of any other Hose or failure to properly
• Making the final selection of the Hose and Fitting. connect the Hose can cause a fire or an explosion resulting in death, per-
• Assuring that the user’s requirements are met and that the application sonal injury, and property damage.
presents no health or safety hazards. Parker manufactures a special Hose for certain compressed natural gas
• Providing all appropriate health and safety warnings on the equipment (“CNG”) applications where static electricity buildup may occur. Parker CNG
on which the Hose and Fittings are used. Hose assemblies comply with AGA Requirements 1-93, “Hoses for Natural
• Assuring compliance with all applicable government and industry stan- Gas Vehicles and Fuel Dispensers”. This Hose is labeled “Electrically Con-
dards. ductive for CNG Use” on its layline and packaging. This Hose must be prop-
1.5 Additional Questions: Call the appropriate Parker technical service de- erly connected to the appropriate Parker Fittings and properly grounded in
partment if you have any questions or require any additional information. order to dissipate dangerous static charge buildup, which occurs in, for
See the Parker publication for the product being considered or used, or call example, high velocity CNG dispensing or transfer. Do not use any other
1-800-CPARKER, or go to www.parker.com, for telephone numbers of the Hose for CNG applications where static charge buildup may occur, even if
appropriate technical service department. electrically conductive. Use of other Hoses in CNG applications or failure to
properly connect or ground this Hose can cause a fire or an explosion re-
2.0 HOSE AND FITTING SELECTION INSTRUCTIONS sulting in death, personal injury, and property damage. Care must also be
2.1 Electrical Conductivity: Certain applications require that the Hose be taken to protect against CNG permeation through the Hose wall. See sec-
nonconductive to prevent electrical current flow. Other applications require tion 2.6, Permeation, for more information. Parker CNG Hose is intended
the Hose and the Fitting and the Hose/Fitting interface to be sufficiently for dispenser and vehicle use at a maximum temperature of 180°F. Parker
conductive to drain off static electricity. Extreme care must be exercised CNG Hose should not be used in confined spaces or unventilated areas or
when selecting Hose and Fittings for these or any other applications in areas exceeding 180°F. Final assemblies must be tested for leaks. CNG
which electrical conductivity or nonconductivity is a factor. Hose Assemblies should be tested on a monthly basis for conductivity per
AGA 1-93.
The electrical conductivity or nonconductivity of Hose and Fittings is de-
pendent upon many factors and may be susceptible to change. These fac- Parker manufactures special Hose for aerospace in-flight applications. Aero-
tors include but are not limited to the various materials used to make the space in-flight applications employing Hose to transmit fuel, lubricating flu-
Hose and the Fittings, Fitting finish (some Fitting finishes are electrically ids and hydraulic fluids require a special Hose with a conductive inner tube.
conductive while others are nonconductive), manufacturing methods (in- This Hose for in-flight applications is available only from Parker’s Stratoflex
cluding moisture control), how the Fittings contact the Hose, age and amount Products Division. Do not use any other Parker Hose for in-flight applica-
of deterioration or damage or other changes, moisture content of the Hose tions, even if electrically conductive. Use of other Hoses for in-flight applica-
at any particular time, and other factors. tions or failure to properly connect or ground this Hose can cause a fire or

FluidConnectors
an explosion resulting in death, personal injury , and property damage. of which can cause premature Hose failure. Any Hose that has been kinked
These Hose assemblies for in-flight applications must meet all applicable or bent to a radius smaller than the minimum bend radius, and any Hose
aerospace industry, aircraft engine, and aircraft requirements. that has been cut or is cracked or is otherwise damaged, should be re-
2.2 Pressure: Hose selection must be made so that the published maximum moved and discarded.
recommended working pressure of the Hose is equal to or greater than the 2.12 Proper End Fitting: See instructions 3.2 through 3.5. These recommenda-
maximum system pressure. Surge pressures or peak transient pressures tions may be substantiated by testing to industry standards such as SAE
in the system must be below the published maximum working pressure for J517 for hydraulic applications, or MIL-A-5070, AS1339, or AS3517 for Hoses
the Hose. Surge pressures and peak pressures can usually only be deter- from Parker’s Stratoflex Products Division for aerospace applications.
mined by sensitive electrical instrumentation that measures and indicates 2.13 Length: When establishing a proper Hose length, motion absorption, Hose
pressures at millisecond intervals. Mechanical pressure gauges indicate length changes due to pressure, and Hose and machine tolerances and
only average pressures and cannot be used to determine surge pressures movement must be considered.
or peak transient pressures. Published burst pressure ratings for Hose is
2.14 Specifications and Standards: When selecting Hose and Fittings, gov-
for manufacturing test purposes only and is no indication that the Product
ernment, industry, and Parker specifications and recommendations must
can be used in applications at the burst pressure or otherwise above the
be reviewed and followed as applicable.
published maximum recommended working pressure.
2.15 Hose Cleanliness: Hose components may vary in cleanliness levels. Care
2.3 Suction: Hoses used for suction applications must be selected to insure
must be taken to insure that the Hose Assembly selected has an adequate
that the Hose will withstand the vacuum and pressure of the system. Im-
level of cleanliness for the application.
properly selected Hose may collapse in suction application.
2.16 Fire Resistant Fluids: Some fire resistant fluids that are to be conveyed by
2.4 Temperature: Be certain that fluid and ambient temperatures, both steady
Hose require use of the same type of Hose as used with petroleum base
and transient, do not exceed the limitations of the Hose. Temperatures be-
fluids. Some such fluids require a special Hose, while a few fluids will not
low and above the recommended limit can degrade Hose to a point where
work with any Hose at all. See instructions 2.5 and 1.5. The wrong Hose
a failure may occur and release fluid. Properly insulate and protect the Hose
may fail after a very short service. In addition, all liquids but pure water may
Assembly when routing near hot objects (e.g. manifolds). Do not use any
burn fiercely under certain conditions, and even pure water leakage may be
Hose in any application where failure of the Hose could result in the con-
hazardous.
veyed fluids (or vapors or mist from the conveyed fluids) contacting any
open flame, molten metal, or other potential fire ignition source that could 2.17 Radiant Heat: Hose can be heated to destruction without contact by such
cause burning or explosion of the conveyed fluids or vapors. nearby items as hot manifolds or molten metal. The same heat source may
then initiate a fire. This can occur despite the presence of cool air around
2.5 Fluid Compatibility: Hose Assembly selection must assure compatibility
the Hose.
of the Hose tube, cover, reinforcement, and Fittings with the fluid media
used. See the fluid compatibility chart in the Parker publication for the prod- 2.18 Welding or Brazing: When using a torch or arc welder in close proximity to
uct being considered or used. This information is offered only as a guide. hydraulic lines, the hydraulic lines should be removed or shielded with ap-
Actual service life can only be determined by the end user by testing under propriate fire resistant materials. Flame or weld spatter could burn through
all extreme conditions and other analysis. the Hose and possibly ignite escaping fluid resulting in a catastrophic fail-
ure. Heating of plated parts, including Hose Fittings and adapters, above
Hose that is chemically compatible with a particular fluid must be assembled
450°F (232°C) such as during welding, brazing, or soldering may emit deadly
using Fittings and adapters containing likewise compatible seals.
gases.
2.6 Permeation: Permeation (that is, seepage through the Hose) will occur
2.19 Atomic Radiation: Atomic radiation affects all materials used in Hose as-
from inside the Hose to outside when Hose is used with gases, liquid and
semblies. Since the long-term effects may be unknown, do not expose Hose
gas fuels, and refrigerants (including but not limited to such materials as
assemblies to atomic radiation.
helium, diesel fuel, gasoline, natural gas, or LPG). This permeation may
result in high concentrations of vapors which are potentially flammable, 2.20 Aerospace Applications: The only Hose and Fittings that may be used for
explosive, or toxic, and in loss of fluid. Dangerous explosions, fires, and in-flight aerospace applications are those available from Parker’s Stratoflex
other hazards can result when using the wrong Hose for such applications. Products Division. Do not use any other Hose or Fittings for in-flight appli-
The system designer must take into account the fact that this permeation cations. Do not use any Hose or Fittings from Parker’s Stratoflex Products
will take place and must not use Hose if this permeation could be hazard- Division with any other Hose or Fittings, unless expressly approved in writ-
ous. The system designer must take into account all legal, government, ing by the engineering manager or chief engineer of Stratoflex Products
insurance, or any other special regulations which govern the use of fuels Division and verified by the user’s own testing and inspection to aerospace
and refrigerants. Never use a Hose even though the fluid compatibility is industry standards.
acceptable without considering the potential hazardous effects that can result 2.21 Unlocking Couplings: Ball locking couplings or other couplings with dis-
from permeation through the Hose Assembly. connect sleeves can unintentionally disconnect if they are dragged over
Permeation of moisture from outside the Hose to inside the Hose will also obstructions or if the sleeve is bumped or moved enough to cause discon-
occur in Hose assemblies, regardless of internal pressure. If this moisture nect. Threaded couplings should be considered where there is a potential
permeation would have detrimental effects (particularly, but not limited to for accidental uncoupling.
refrigeration and air conditioning systems), incorporation of sufficient dry-
3.0 HOSE AND FITTING ASSEMBLY AND INSTALLATION INSTRUCTIONS
ing capacity in the system or other appropriate system safeguards should
be selected and used. 3.1 Component Inspection: Prior to assembly, a careful examination of the
Hose and Fittings must be performed. All components must be checked for
2.7 Size: Transmission of power by means of pressurized fluid varies with pres-
correct style, size, catalog number, and length. The Hose must be exam-
sure and rate of flow. The size of the components must be adequate to keep
ined for cleanliness, obstructions, blisters, cover looseness, kinks, cracks,
pressure losses to a minimum and avoid damage due to heat generation or
cuts or any other visible defects. Inspect the Fitting and sealing surfaces for
excessive fluid velocity.
burrs, nicks, corrosion or other imperfections. Do NOT use any component
2.8 Routing: Attention must be given to optimum routing to minimize inherent that displays any signs of nonconformance.
problems (kinking or flow restriction due to Hose collapse, twisting of the
3.2 Hose and Fitting Assembly: Do not assemble a Parker Fitting on a Parker
Hose, proximity to hot objects or heat sources).
Hose that is not specifically listed by Parker for that Fitting, unless autho-
2.9 Environment: Care must be taken to insure that the Hose and Fittings are rized in writing by the engineering manager or chief engineer of the appro-
either compatible with or protected from the environment (that is, surround- priate Parker division. Do not assemble a Parker Fitting on another
ing conditions) to which they are exposed. Environmental conditions includ- manufacturer’s Hose or a Parker Hose on another manufacturer’s Fitting
ing but not limited to ultraviolet radiation, sunlight, heat, ozone, moisture, unless (i) the engineering manager or chief engineer of the appropriate
water, salt water, chemicals, and air pollutants can cause degradation and Parker division approves the Assembly in writing or that combination is
premature failure. expressly approved in the appropriate Parker literature for the specific Parker
2.10 Mechanical Loads: External forces can significantly reduce Hose life or product, and (ii) the user verifies the Assembly and the application through
cause failure. Mechanical loads which must be considered include exces- analysis and testing. For Parker Hose that does not specify a Parker Fitting,
sive flexing, twist, kinking, tensile or side loads, bend radius, and vibration. the user is solely responsible for the selection of the proper Fitting and
Use of swivel type Fittings or adapters may be required to insure no twist is Hose Assembly procedures. See instruction 1.4.
put into the Hose. Unusual applications may require special testing prior to The Parker published instructions must be followed for assembling the Fit-
Hose selection. tings on the Hose. These instructions are provided in the Parker Fitting
2.11 Physical Damage: Care must be taken to protect Hose from wear, snag- catalog for the specific Parker Fitting being used, or by calling 1-800-
ging, kinking, bending smaller that minimum bend radius, and cutting, any CPARKER, or at www.parker.com.

FluidConnectors
3.3 Related Accessories: Do not crimp or swage any Parker Hose or Fitting with 4.3 Visual Inspection All Other: The following items must be tightened, re-
anything but the listed swage or crimp machine and dies in accordance with paired, corrected or replaced as required:
Parker published instructions. Do not crimp or swage another manufacturer’s • Leaking port conditions;
Fitting with a Parker crimp or swage die unless authorized in writing by the • Excess dirt buildup;
engineering manager or chief engineer of the appropriate Parker division. • Worn clamps, guards or shields; and
3.4 Parts: Do not use any Parker Fitting part (including but not limited to socket, • System fluid level, fluid type, and any air entrapment.
shell, nipple, or insert) except with the correct Parker mating parts, in accor- 4.4 Functional Test: Operate the system at maximum operating pressure
dance with Parker published instructions, unless authorized in writing by the and check for possible malfunctions and leaks. Personnel must avoid
engineering manager or chief engineer of the appropriate Parker division. potential hazardous areas while testing and using the system. See sec-
3.5 Reusable/Permanent: Do not reuse any field attachable (reusable) Hose tion 2.2.
Fitting that has blown or pulled off a Hose. Do not reuse a Parker permanent 4.5 Replacement Intervals: Hose assemblies and elastomeric seals used
Hose Fitting (crimped or swaged) or any part thereof. Complete Hose As- on Hose Fittings and adapters will eventually age, harden, wear and de-
semblies may only be reused after proper inspection under section 4.0. Do teriorate under thermal cycling and compression set. Hose Assemblies
not assemble Fittings to any previously used hydraulic Hose that was in ser- and elastomeric seals should be inspected and replaced at specific re-
vice, for use in a fluid power application. placement intervals, based on previous service life, government or in-
3.6 Pre-Installation Inspection: Prior to installation, a careful examination of dustry recommendations, or when failures could result in unacceptable
the Hose Assembly must be performed. Inspect the Hose Assembly for any downtime, damage, or injury risk. See section 1.2.
damage or defects. Do NOT use any Hose Assembly that displays any signs 4.6 Hose Inspection and Failure: Hydraulic power is accomplished by uti-
of nonconformance. lizing high-pressure fluids to transfer energy and do work. Hoses, Fit-
3.7 Minimum Bend Radius: Installation of a Hose at less than the minimum tings, and Hose Assemblies all contribute to this by transmitting fluids at
listed bend radius may significantly reduce the Hose life. Particular attention high pressures. Fluids under pressure can be dangerous and potentially
must be given to preclude sharp bending at the Hose to Fitting juncture. Any lethal and, therefore, extreme caution must be exercised when working
bending during installation at less than the minimum bend radius must be with fluids under pressure and handling the Hoses transporting the fluids.
avoided. If any Hose is kinked during installation, the Hose must be discarded. From time to time, Hose Assemblies will fail if they are not replaced at
proper time intervals. Usually these failures are the result of some form of
3.8 Twist Angle and Orientation: Hose Assembly installation must be such that
misapplication, abuse, wear, or failure to perform proper maintenance.
relative motion of machine components does not produce twisting.
When Hoses fail, generally the high-pressure fluids inside escape in a
3.9 Securement: In many applications, it may be necessary to restrain, protect, stream which may or may not be visible to the user. Under no circum-
or guide the Hose to protect it from damage by unnecessary flexing, pressure stances should the user attempt to locate the leak by “feeling” with their
surges, and contact with other mechanical components. Care must be taken hands or any other part of their body. High-pressure fluids can and will
to insure such restraints do not introduce additional stress or wear points. penetrate the skin and cause severe tissue damage and possibly loss of
3.10 Proper Connection of Ports: Proper physical installation of the Hose As- limb. Even seemingly minor hydraulic fluid injection injuries must be treated
F
sembly requires a correctly installed port connection insuring that no twist or immediately by a physician with knowledge of the tissue damaging prop-
torque is transferred to the Hose when the Fittings are being tightened or erties of hydraulic fluid.
otherwise during use. If a Hose failure occurs, immediately shut down the equipment and leave
3.11 External Damage: Proper installation is not complete without insuring that the area until pressure has been completely released from the Hose As-
tensile loads, side loads, kinking, flattening, potential abrasion, thread dam- sembly. Simply shutting down the hydraulic pump may or may not elimi-
age, or damage to sealing surfaces are corrected or eliminated. See instruc- nate the pressure in the Hose Assembly. Many times check valves, etc.,
tion 2.10. are employed in a system and can cause pressure to remain in a Hose
3.12 System Checkout: All air entrapment must be eliminated and the system Assembly even when pumps or equipment are not operating. Tiny holes
pressurized to the maximum system pressure (at or below the Hose maxi- in the Hose, commonly known as pinholes, can eject small, dangerously
mum working pressure) and checked for proper function and freedom from powerful but hard to see streams of hydraulic fluid. It may take several
leaks. Personnel must stay out of potential hazardous areas while testing and minutes or even hours for the pressure to be relieved so that the Hose
using. Assembly may be examined safely.
3.13 Routing: The Hose Assembly should be routed in such a manner so if a Once the pressure has been reduced to zero, the Hose Assembly may
failure does occur, the escaping media will not cause personal injury or prop- be taken off the equipment and examined. It must always be replaced if a
erty damage. In addition, if fluid media comes in contact with hot surfaces, failure has occurred. Never attempt to patch or repair a Hose Assembly
open flame, or sparks, a fire or explosion may occur. See section 2.4. that has failed. Consult the nearest Parker distributor or the appropriate
Parker division for Hose Assembly replacement information.
4.0 HOSE AND FITTING MAINTENANCE AND REPLACEMENT INSTRUCTIONS Never touch or examine a failed Hose Assembly unless it is obvious that
4.1 Even with proper selection and installation, Hose life may be significantly the Hose no longer contains fluid under pressure. The high-pressure fluid
reduced without a continuing maintenance program. The severity of the appli- is extremely dangerous and can cause serious and potentially fatal in-
cation, risk potential from a possible Hose failure, and experience with any jury.
Hose failures in the application or in similar applications should determine 4.7 Elastomeric seals: Elastomeric seals will eventually age, harden, wear
the frequency of the inspection and the replacement for the Products so that and deteriorate under thermal cycling and compression set. Elastomeric
Products are replaced before any failure occurs. A maintenance program must seals should be inspected and replaced.
be established and followed by the user and, at minimum, must include in-
4.8 Refrigerant gases: Special care should be taken when working with
structions 4.2 through 4.7.
refrigeration systems. Sudden escape of refrigerant gases can cause
4.2 Visual Inspection Hose/Fitting: Any of the following conditions require im- blindness if the escaping gases contact the eye and can cause freezing
mediate shut down and replacement of the Hose Assembly: or other severe injuries if it contacts any other portion of the body.
• Fitting slippage on Hose;
4.9 Compressed natural gas (CNG): Parker CNG Hose Assemblies should
• Damaged, cracked, cut or abraded cover (any reinforcement exposed);
be tested after installation and before use, and at least on a monthly
• Hard, stiff, heat cracked, or charred Hose;
basis per AGA 1-93 Section 4.2 “Visual Inspection Hose/Fitting”. The rec-
• Cracked, damaged, or badly corroded Fittings;
ommended procedure is to pressurize the Hose and check for leaks and
• Leaks at Fitting or in Hose;
to visually inspect the Hose for damage.
• Kinked, crushed, flattened or twisted Hose; and
• Blistered, soft, degraded, or loose cover. Caution: Matches, candles, open flame or other sources of ignition shall
not be used for Hose inspection. Leak check solutions should be rinsed
off after use.

FluidConnectors
Technical Information Notes

FluidConnectors
Alphanumeric Index
Part Number Page Part Number Page Part Number Page Part Number Page
101HP-2-3 .................. B120 15K0101-8-8C ............. C29 2243D-03V70 ............... B20
015301 – 02Y6-16-9C 101HP-2-4 .................. B120 15K0201-1-8C ............. C29 2243D-04V70 ............... B23
015301 ........................... E5 101HP-4-3 .................. B120 15K0201-2-8C ............. C29 2244N-025V00 ............. B26
015306 ........................... E5 101HP-4-4 .................. B120 15K0201-4-8C ............. C29 2244N-08V10 ............... B28
015307 ........................... E5 101HP-4-6 .................. B120 15K0201-6-8C ............. C29 2244N-08V71 ............... B28
015308 ........................... E5 101HP-6-3 .................. B120 15K0202-2-2C ............. C27 2244N-20V30 ............... B30
015309 ........................... E5 101HP-6-4 .................. B120 15K0202-4-4C ............. C27 2245D-03V32 ............... B31
015736 ........................... E5 101HP-6-6 .................. B120 15K0202-6-6C ............. C27 2245N-04V00 .... B33, B122
02Y5-2-4C .................... C12 101HP-8-6 .................. B120 15K0202-8-8C ............. C27 2245N-04V02 .... B33, B122
02Y5-2-6C .................... C12 101NX-4-4 ... B15, B23, B33 15KL02-4C ................... C27 2245N-04V04 .... B33, B122
02Y5-2-9C .................... C12 .................... B55, B122 15KL02-6C ................... C27 2245N-05V00 ............... B37
02Y5-2-12C .................. C12 101NX-6-05 .................. B37 15KL02-8C ................... C27 2245N-06V30 ............... B39
02Y5-2-16C .................. C12 101NX-6-06 .................. B39 15KT02-4C ................... C28 2245N-08V30 ............... B41
02Y5-4-4C .................... C12 101NX-6-4 ... B15, B23, B33 15KT02-6C ................... C28 2245N-12V30 ............... B43
02Y5-4-6C .................... C12 .................... B55, B122 15KT02-8C ................... C28 2245N-16V30 ............... B45
02Y5-4-9C .................... C12 101NX-6-5 .................... B47 15KX02-4C ................... C28 2380F-05V07 ............... B47
02Y5-4-12C .................. C12 101NX-8-06 .................. B39 15KX02-6C ................... C28 2380F-08V07 ............... B48
02Y5-4-16C .................. C12 101PX-4-4 ...................... B6 15KX02-8C ................... C28 2380F-12V07 ............... B50
02Y5-6-4C .................... C12 101RS-8-08 ................ B115 1925X-4-3 .................... B94 2380N-04V00 .... B52, B125
02Y5-6-6C .................... C12 1068X-4-4 ........ B53, B112, 1928X-4-4 ........... B53, B61 2380N-04V02 .... B52, B125
02Y5-6-9C .................... C12 ............................. B126 ............................... B112 2380N-04V04 .... B52, B125
02Y5-6-12C .................. C12 1068X-6-4 ........ B53, B112, 192LX-4-3 .................... B75 2380N-04V33 ............... B55
02Y5-6-16C .................. C12 ............................. B126 192NX-6-05 .................. B38 2380N-04V71 ............... B52
02Y5-8-4C .................... C12 1069X-12-12 ...... B44, B51, 192NX-6-06 .................. B40 2380N-05V00 ............... B58
02Y5-8-6C .................... C12 ............................... B68 192NX-8-06 .................. B40 2380N-05V71 ............... B58
02Y5-8-9C .................... C12 1069X-16-12 ...... B44, B51, 1AY8X-6-2A .................. B27 2390N-04V10 ............... B60
02Y5-8-12C .................. C12 ............................... B68 1BCLX-4-4 ................... B25 2390N-04V12 ............... B60
02Y5-8-16C .................. C12 1069X-16-16 ....... B46, B70 1BCNX-4-4 ......... B17, B35, 2390N-04V16 ............... B60
106EX-4-012 .................. B3 .................... B57, B123 2390N-06V13 ............... B63
G
02Y5-12-4C .................. C12
02Y5-12-6C .................. C12 106HP-4-3 .................. B120 1BCPX-4-4 ..................... B7 2390N-08V12 ............... B65
02Y5-12-9C .................. C12 106HP-4-4 .................. B120 1C38X-4-4 ........ B54, B113, 2390N-08V13 ............... B65
02Y5-12-12C ................ C12 106HP-5-4 .................. B120 ............................. B128 2390N-08V16 ............... B65
02Y5-12-16C ................ C12 106HP-6-4 .................. B120 1C3NX-8-4 ........ B35, B124 2390N-12V03 ............... B67
02Y5-16-6C .................. C12 106HP-6-6 .................. B120 1C3PX-8-4 ..................... B7 2390N-16V12 ............... B69
02Y5-16-9C .................. C12 106NX-4-4 ......... B16, B24, 1C9NX-12-05 ............... B38 2390N-16V13 ............... B69
02Y5-16-12C ................ C12 ..................... B34, B56, 1C9NX-14-06 ............... B40 2390N-16V16 ............... B69
02Y5-16-16C ................ C12 ............................. B123 1C9RS-16-08 ............. B115 2440D-025V37 ............. B71
02Y6-2-4C .................... C22 106NX-6-4 .......... B16, B24 1D98X-4-4 .......... B54, B62, 2440D-03V37 ............... B73
02Y6-2-6C .................... C22 ..................... B34, B56, .................. B113, B127 2440N-04V37 ............... B77
02Y6-2-9C .................... C22 ............................ B123 1D9LX-4-4 .................... B25 2440N-04V91 ............... B77
02Y6-4-4C .................... C22 106NX-6-05 ......... B37, B47 1D9NX-4-4 ......... B17, B35, 2440D-05V37 ............... B80
02Y6-4-6C .................... C22 106NX-6-06 .................. B39 .......................B57, B124 2440N-06V91 ............... B82
02Y6-4-9C .................... C22 106NX-8-06 .................. B39 1D9PX-4-4 ..................... B8 2440N-08V37 ............... B83
02Y6-6-4C .................... C22 106NX-20-20 ................ B30 1MB8X-6-4 ....... B54, B113, 2440N-08V91 ............... B83
02Y6-6-6C .................... C22 106PX-4-4 ...................... B7 ............................. B127 2440N-12V37 ............... B85
02Y6-6-9C .................... C22 10K0101-12-12C ......... C29 1MBPX-6-4 ..................... B8 2440N-12V91 ............... B85
02Y6-8-4C .................... C22 10K0101-16-16C ......... C29 2440N-16V37 ............... B87
02Y6-8-6C .................... C22 10K0202-12-12C ......... C27 201RX-2-2C – 2440N-16V91 ............... B87
02Y6-8-9C .................... C22 10K0202-16-16C ......... C27 2X90N-06V04 2440N-32V10 ............... B89
02Y6-12-6C .................. C22 10KL02-12C ................. C27 201RX-2-2C .................... B4 2640D-025V32 ............. B91
02Y6-12-9C .................. C22 10KL02-16C ................. C27 2020N-012V30 ................ B3 2640D-03V32 ............... B93
02Y6-16-9C .................. C22 10KT02-12C ................. C28 2020N-02V30 .................. B4 2640N-08V32 ............... B95
10KT02-16C ................. C28 2040N-04V00 .................. B6 2640N-12V32 ............... B97
1018X-6-4 – 1MBPX-6-4 10KX02-12C ................ C28 206RX-4-2C .................... B5 2640N-12V71 ............... B97
10KX02-16C ................ C28 216-200-18 ..................... E2 2640N-24V80 .................B99
1018X-6-4 .......... B52, B60,
13BNX-6-05 ................. B38 220-200-22 ..................... E2 2640N-32V80 ............. B101
.................. B111, B125
13BNX-6-06 ................. B40 2240D-02V32 .................. B9 2740D-025V30 ........... B103
1019X-8-8 .................... B48
13BNX-8-06 ................. B40 2240D-025V34 .............. B10 2740D-03V30 ............. B105
1019X-12-12 ................ B50
15K0101-1-1C ............. C29 2240D-03V34 ................ B13 2740D-05V32 ............. B107
1019X-16-12 ...... B43, B50,
15K0101-2-2C ............. C29 2240D-04V32 ................ B15 2840D-03V34 ............. B108
............................... B67
15K0101-4-4C ............. C29 2240D-05V32 ................ B18 2840D-05V32 ............. B109
1019X-16-16 ....... B45, B69
15K0101-6-6C ............. C29 2243D-025V70 .............. B19 2840D-08V30 ............. B110
G1 Parker Hannifin Corporation

FluidConnectors
Alphanumeric Index
2TURX-4-2C .................. B5 5Y02-9-16C .................. C15 5YY5-16-12C ................. C9 601LX-16-16C ............. B87
2X90N-04V14 ............ B111 5Y02-12-2C .................. C15 5YY6-4-4C ................... C10 601LX-32-32 ................ B89
2X90N-06V14 ............ B114 5Y02-12-4C .................. C15 5YY6-4-6C ................... C10 601NX-2-4 ... B15, B23, B33
2X90N-08V14 ............ B115 5Y02-12-6C .................. C15 5YY6-4-9C ................... C10 ............................... B55
2X90N-08V14 ............ B116 5Y02-12-8C .................. C15 5YY6-6-4C ................... C10 601NX-4-4 ... B15, B23, B33
5Y02-12-12C ................ C15 5YY6-6-6C ................... C10 ............................... B55
416-400-16 – 5YY6-16-9C 5Y02-12-16C ................ C15 5YY6-6-9C ................... C10 601NX-4-4C ......... B6, B15,
416-400-16 ..................... E3 5Y02-16-2C .................. C15 5YY6-9-4C ................... C10 ... B23, B33, B55, B122
508-J-500-10 .................. E2 5Y02-16-4C .................. C15 5YY6-9-6C ................... C10 601PL-1-2 ................. B9B9
510-A-500-12 ................. E2 5Y02-16-6C .................. C15 5YY6-9-9C ................... C10 601RS-6-6 .................. B114
520-A-500-26 ................. E2 5Y02-16-8C .................. C15 5YY6-12-4C ................. C10 601VX-2-2A .................. B19
57CR-6 ....................... B118 5Y02-16-12C ................ C15 5YY6-12-6C ................. C10 602AX-1-2A .................. B11
57CR-8 ....................... B118 5Y02-16-16C ................ C15 5YY6-12-9C ................. C10 602AX-2-3 ... B13, B21, B31
57CR-16 ..................... B118 5Y5Y-4-4C .................... C13 5YY6-16-4C ................. C10 602NX-4-4 .......... B16, B24,
5Y01-4-2C .................... C11 5Y5Y-4-6C .................... C13 5YY6-16-6C ................. C10 ...................... B34, B56
5Y01-4-4C .................... C11 5Y5Y-4-9C .................... C13 5YY6-16-9C ................. C10 6065X-16-12C..............B117
5Y01-4-6C .................... C11 5Y5Y-4-12C .................. C13 6068X-4-2AC ............... B27
5Y01-4-8C .................... C11 5Y5Y-4-16C .................. C13 6015X-32-24-TC – 6068X-8-8C .................. B29
5Y01-4-12C .................. C11 5Y5Y-6-6C .................... C13 6ZEAX-5-2A 6069X-4-4C ........ B53, B61,
5Y01-4-16C .................. C11 5Y5Y-6-9C .................... C13 6015x-12-12C ............. B116 .................. B112, B126
5Y01-6-2C .................... C11 5Y5Y-6-12C .................. C13 6015x-16-12C...............B116 6069X-6-4C ........ B53, B61,
5Y01-6-4C .................... C11 5Y5Y-6-16C .................. C13 6015X-32-24-TC ............B99 .................. B112, B126
5Y01-6-6C .................... C11 5Y5Y-9-9C .................... C13 6015X-32-32-TC.......... B101 6069X-8-6C .................. B64
5Y01-6-8C .................... C11 5Y5Y-9-12C .................. C13 6018X-2-2A .................. B26 6069X-8-8C ........ B42, B49,
5Y01-6-12C .................. C11 5Y5Y-9-16C .................. C13 6018X-2-2AC ............... B26 ............................... B66
5Y01-6-16C .................. C11 5Y5Y-12-12C ................ C13 6018X-4-2AC ............... B26 6069X-16-16C .... B46, B70
5Y01-9-2C .................... C11 5Y5Y-12-16C ................ C13 6018X-4-4 .......... B52, B60, 606AX-4-2A .................. B11
5Y01-9-4C .................... C11 5Y5Y-16-16C ................ C13 .................. B111, B125 606AX-4-3C ....... B14, B22,
5Y01-9-6C .................... C11 5Y6Y-4-4C .................... C14 6018X-8-8C .................. B28 ............................... B32
5Y01-9-8C .................... C11 5Y6Y-4-6C .................... C14 6019X-4-4C .................. B60 606CR-6-6C ............... B118
5Y01-9-12C .................. C11 5Y6Y-4-9C .................... C14 6019X-6-6 .................... B63 606CR-8-8C ............... B118
5Y01-9-16C .................. C11 5Y6Y-6-4C .................... C14 6019X-6-6C .................. B63 606CR-16-16C ........... B118
5Y01-12-2C .................. C11 5Y6Y-6-6C .................... C14 6019X-8-6 .................... B63 606LX-6-5C .................. B59
5Y01-12-4C .................. C11 5Y6Y-6-9C .................... C14 6019X-8-6C .................. B63 606LX-8-5C .................. B59
5Y01-12-6C .................. C11 5Y6Y-9-4C .................... C14 6019X-8-8 ........... B41, B65 606LX-16-12C ... B44, B51,
5Y01-12-8C .................. C11 5Y6Y-9-6C .................... C14 6019X-8-8C ........ B41, B48, ...................... B68, B86
5Y01-12-12C ................ C11 5Y6Y-9-9C .................... C14 ............................... B65 606LX-16-16C ............. B88
5Y01-12-16C ................ C11 5Y6Y-12-4C .................. C14 6019X-12-12 ....... B43, B67 606LX-32-32 ................ B89
5Y01-16-2C .................. C11 5Y6Y-12-6C .................. C14 6019X-16-16C .... B45, B69 606NX-4-4C ......... B7, B16,
5Y01-16-4C .................. C11 5Y6Y-12-9C .................. C14 601AX-1-2A .................. B10 ... B24, B34, B56, B123
5Y01-16-6C .................. C11 5Y6Y-16-4C .................. C14 601AX-2-2A .................. B10 606NX-6-4C .......... B7, B16
5Y01-16-8C .................. C11 5Y6Y-16-6C .................. C14 601AX-2-3 ... B13, B20, B31 ... B24, B34, B56, B123
5Y01-16-12C ................ C11 5Y6Y-16-9C .................. C14 601AX-6-5 .................... B18 612-400-14 ............... E2, E3
5Y01-16-16C ................ C11 5YY5-4-6C ..................... C9 601EX-2-012 .................. B3 620-100-18 ..................... E2
5Y02-4-2C .................... C15 5YY5-4-9C ..................... C9 601EX-2-2 ...................... B4 63ZAX-5-2A .................. B12
5Y02-4-4C .................... C15 5YY5-4-12C ................... C9 601EX-4-012 .................. B3 63ZAX-5-3 ... B14, B22, B32
5Y02-4-6C .................... C15 5YY5-4-16C ................... C9 601LX-2-2AC ............... B71 63ZAX-5-3C ........ B14, B22
5Y02-4-8C .................... C15 5YY5-6-4C ..................... C9 601LX-2-4 .................... B77 ............................... B32
5Y02-4-12C .................. C15 5YY5-6-9C ..................... C9 601LX-4-3 .... B13, B20,B31 63ZNX-5-4C ....... B17, B25,
5Y02-4-16C .................. C15 5YY5-6-12C ................... C9 ............................... B73 ...................... B36, B57
5Y02-6-2C .................... C15 5YY5-6-16C ................... C9 601LX-4-4 .................... B77 65Y8X-6-4 .......... B53, B62,
5Y02-6-4C .................... C15 5YY5-9-4C ..................... C9 601LX-4-4C ........ B52, B77, .....................B112,B126
5Y02-6-6C .................... C15 5YY5-9-6C ..................... C9 .................. B111, B125 65YLX-6-3 .................... B75
5Y02-6-8C .................... C15 5YY5-9-12C ................... C9 601LX-4-5 ........... B58, B80 65YLX-6-4 .................... B79
5Y02-6-12C .................. C15 5YY5-9-16C ................... C9 601LX-4-5C ......... B58, B80 65YLX-6-4C ....... B53, B62,
5Y02-6-16C .................. C15 5YY5-12-4C ................... C9 601LX-6-5 ........... B58, B80 .......... B79, B112, B126
5Y02-9-2C .................... C15 5YY5-12-6C ................... C9 601LX-6-5C ......... B58, B80 66Y5X-4-3 .................... B94
5Y02-9-4C .................... C15 5YY5-12-9C ................... C9 601LX-8-8 ........... B28, B83 66Y5X-4-3C ................. B94
5Y02-9-6C .................... C15 5YY5-12-16C ................. C9 601LX-8-8C .................. B83 66YHX-4-2AC ... B92, B104
5Y02-9-8C .................... C15 5YY5-16-4C ................... C9 601LX-12-12C .... B67, B85 66YHX-4-3C ............... B106
5Y02-9-12C .................. C15 5YY5-16-6C ................... C9 601LX-16-12C .... B67, B85 66YLX-4-3 .................... B74
5YY5-16-9C ................... C9 66YLX-4-3C ................. B74

FluidConnectors
Alphanumeric Index
6928X-4-4 ....... B110, B127 6C9RS-14-6 ............... B114 6Y2LX-12-5C ............... B81 80C-F04G ....................... E4
692HX-4-3C ............... B106 6D9NX-8-8-PL ............. B28 6Y2LX-12-8C ............... B84 80C-F06G ....................... E4
692LX-4-3C .................. B75 6C9RS-14-6 ............... B114 6Y2LX-16-12C................B86 80C-F10G ....................... E4
692LX-4-4 .................... B78 6EYLX-6-3C ................. B76 6Y4HX-4-2AC ... B92, B103 80C-F12G ....................... E4
692LX-6-5C .................. B81 6EYLX-6-4C ................. B79 6Y4HX-6-2AC ... B92, B103 83C-F16G ....................... E4
6AY5X-6-3 .................... B93 6EYLX-9-5C ................. B81 6Y4HX-6-3C ............... B105 80C-F08W ...................... E4
6AY5X-6-3C ................. B93 6EZAX-5-2A ................. B12 6Y4HX-9-3C ............... B105 80C-G03 .............. B117, E4
6AY5X-11-8C ............... B95 6HE5X-32-24-TC......... B100 6Y4HX-9-5C ............... B107 80C-G04 .............. B117, E4
6AY5X-16-12C .. B97, B116 6HE5X-32-32-TC........ B102 6Y4HX-9-5C-XLT ....... B107 80C-G06 .............. B117, E4
6AY5X-16-12C-SD........B97, 6HELX-16-16-TC .......... B88 6Y4LX-4-2AC ............... B72 80C-HP3 ........................ E4
................................B116 6HELX-32-32-TC ......... B90 6Y4LX-6-2AC ............... B72 80C-HP4 ............. B117, E4
6AY8X-6-2AC ............... B27 6HN5X-32-24-TC ....... B100 6Y4LX-6-3C ................. B74 80C-HP6 .................... B117
6AY8X-6-4 ........... B52, B61 6HN5X-32-32-TC ....... B102 6Y4LX-9-3C ................. B74 80C-R01-PFD ................ E5
.................. B111, B126 6HNLX-16-16-TC .......... B88 6Y4WX-16-08C .......... B110 80C-YP6 ......................... E4
6AY8X-8-5C ................. B59 6HNLX-32-32-TC ......... B90 6Y4WX-6-3C .............. B108 82C-R01-PFD ................ E5
6AY8X-11-8C ............... B29 6HYPL-1-2 ..................... B9 6Y4WX-9-3C .............. B108 82C-R02-PFD ................ E5
6AY9X-6-4C ................. B61 6HYLX-4-2AC .............. B72 6Y4WX-9-5C .............. B109 83C-081-PFD ................. E5
6AY9X-8-6C ................. B64 6HYLX-6-3C .................. B76 6Y4WX-9-5C-RCS ..... B109 83C-9X04 ....................... E4
6AY9X-11-8C ..... B42, B49, 6HYLX-6-4C .................. B79 6Y45X-6-3C ................. B93 83C-9X08 ....................... E4
............................... B66 6HYLX-9-5C-LH ........... B81 6Y45X-9-3C ................. B93 83C-9X16 ....................... E4
6AY9X-16-16C .... B46, B70 6Y01-4-2C .................... C21 6Y6Y-4-4C .................... C23 83C-F16W ...................... E4
6AYAX-6-2A .................. B11 6Y01-4-4C .................... C21 6Y6Y-4-6C .................... C24 94C-080-PFD ................. E5
6AYAX-6-3 ... B14, B21, B32 6Y01-4-6C .................... C21 6Y6Y-4-9C .................... C24
6AYHX-6-2AC ... B91, B103 6Y01-4-8C .................... C21 6Y6Y-6-6C .................... C23
6AYHX-6-3C ............... B105 6Y01-4-12C .................. C21 6Y6Y-6-9C .................... C24 AV5Y-4C-20 – E408LCA3
6AYHX-8-5C ............... B107 6Y01-4-16C .................. C21 6Y6Y-9-9C .................... C23 AV5Y-4C-20 .................. C31
6AYHX-10-5C ............. B107 6Y01-6-2C .................... C21 6YHLX-4-2AC-LH ..........B72 AV5Y-6C-20 .................. C31
6AYHX-13-5C ............. B105 6Y01-6-4C .................... C21 6YHLX-6-3C ................. B74 AV5Y-9C-20 .................. C31
6AYLX-6-2AC ............... B71 6Y01-6-6C .................... C21 6YHLX-4-3C-LH ............ B74
6AYLX-6-3 .......... B14, B21, 6Y01-6-8C .................... C21 6YHLX-6-3C-LH ............ B74
AV5Y-12C-20 ................ C31
AV5Y-16C-20 ................ C31 G
...................... B32, B73 6Y01-6-12C .................. C21 6YHLX-6-4C-LH ........... B78 AV6Y-4C-30 .................. C33
6AYLX-6-3C ................. B73 6Y01-6-16C .................. C21 6YHLX-6-4C .................. B78 AV6Y-4C-60 .................. C35
6AYLX-6-4 .................... B78 6Y01-9-2C .................... C21 6YY5-4-4C ................... C10 AV6Y-6C-30 .................. C33
6AYLX-6-4C ........ B52, B78 6Y01-9-4C .................... C21 6YY5-4-6C ................... C10 AV6Y-6C-60 .................. C35
.................. B111, B126 6Y01-9-6C .................... C21 6YY5-4-9C ................... C10 AV6Y-9C-30 .................. C33
6AYLX-6-4C-SD . B52, B78, 6Y01-9-8C .................... C21 6YY5-4-12C ................. C10 AV6Y-9C-60 .................. C35
.................. B111, B125 6Y01-9-12C .................. C21 6YY5-4-16C ................. C10 AY6C-CAP ...................... C5
6AYLX-8-5C ................. B80 6Y01-9-16C .................. C21 6YY5-6-4C ................... C10 AY8C-CAP ...................... C5
6AYLX-8-6C ................. B82 6Y02-4-2C .................... C24 6YY5-6-6C ................... C10 AY11C-CAP .................... C5
6AYLX-11-8C ...... B29, B84 6Y02-4-4C .................... C24 6YY5-6-9C ................... C10 AY16C-CAP .................... C5
6AYLX-11-8C-SD ........ B29, 6Y02-4-6C .................... C24 6YY5-6-12C ................. C10 C09-125-1680 .............. D15
............................... B84 6Y02-4-8C .................... C24 6YY5-6-16C ................. C10 C10-115-1202 .............. D10
6AYLX-16-12C .... B44, B51 6Y02-4-12C .................. C24 6YY5-9-4C ................... C10 C10-115-1222 .............. D10
...................... B68, B85 6Y02-4-16C .................. C24 6YY5-9-6C ................... C10 C10-115-1401 .............. D10
6AYLX-16-12C-SD ....... B85 6Y02-6-2C .................... C24 6YY5-9-9C ................... C10 C10-115-1402 .............. D10
6AYLX-16-16C ............. B87 6Y02-6-4C .................... C24 6YY5-9-12C ................. C10 C10-115-1404 .............. D10
6AYLX-16-16C-SD ....... B87 6Y02-6-6C .................... C24 6YY5-9-16C ................. C10 C10-115-1422 .............. D10
6AYLX-16-16-HCL ....... B87 6Y02-6-8C .................... C24 6YY6-4-6C ................... C21 C10-115-1452 .............. D10
6AYLX-32-32-Flat ......... B90 6Y02-6-12C .................. C24 6YY6-4-9C ................... C21 C10-115-1454 .............. D10
6AYNX-6-4 .......... B16, B24 6Y02-6-16C .................. C24 6YY6-6-4C ................... C21 C10-115-6202 .............. D11
............ B34, B56, B123 6Y02-9-2C .................... C24 6YY6-6-9C ................... C21 C10-115-6204 .............. D11
6AYNX-6-4C ......... B6, B16, 6Y02-9-4C .................... C24 6YY6-9-4C ................... C21 C10-115-6401 .............. D11
... B24, B34, B56, B123 6Y02-9-6C .................... C24 6YY6-9-6C ................... C21 C10-115-6402 .............. D11
6AYWX-6-3C ............... B108 6Y02-9-8C .................... C24 6ZEAX-1-2A ................... B12 C10-115-6404 .............. D11
6AYWX-6-3C-55 ......... B108 6Y02-9-12C .................. C24 6ZEAX-5-2A ................. B12 C10-115-6452 .............. D11
6AYWX-10-5C ............ B109 6Y02-9-16C .................. C24 6ZELX-5-3C ................... B75 C10-115-6454 .............. D11
6AYWX-10-5C-55 ....... B109 6Y25X-9-8C ................. B96 C10-116-1202 .............. D12
6C95X-16-8C ............... B96 6Y25X-12-8C ............... B96 80C-001-PFD – C10-116-1222 .............. D12
6C95X-25-12C.....B98,B117 6Y25X-16-12C.....B98, B117 94C-080-PFD C10-116-1402 .............. D12
6C9LX-16-8C ...... B29, B84 6Y2LX-9-5C ................. B81 80C-001-PFD ................. E5 C10-116-1422 .............. D12
6C9LX-25-12C ............. B86 6Y2LX-9-6C ................. B82 80C-081-PFD ................. E5 C10-116-5202 .............. D13
6C9RS-14-6 ........ B114B86 6Y2LX-9-8C ................. B84

FluidConnectors
Alphanumeric Index
C10-116-6202 .............. D13 HP006-1-NMB ................ D4 M55STIF4 ....................... E3 SV5Y-6C-20 .................. C30
C10-116-6402 .............. D13 HP006-1-NMC ............... D4 MBR003 .......................... E3 SV5Y-9C-20 .................. C30
C10-125-1202 .............. D13 HP006-1-NMD ............... D4 MBR007 .......................... E3 SV6Y-4C-30 .................. C33
C10-125-5202 .............. D14 HP006-1-X13 ................. D4 MBR008 .......................... E3 SV6Y-4C-60 .................. C35
C10-125-6202 .............. D14 HP006-2-A9 ................... D5 MBR009 .......................... E3 SV6Y-6C-30 .................. C33
C19-950-0029 .............. D15 HP006-2-A12 ................. D5 MBR010 .......................... E3 SV6Y-6C-60 .................. C35
C19-950-0062 .............. D15 HP006-2-HM4 ................ D5 MBR012 .......................... E3 SV6Y-9C-30 .................. C33
C19-950-0064 .............. D15 HP006-2-LM6 ................. D5 MBR013-B ...................... E3 SV6Y-9C-60 .................. C35
C19-950-1600 .............. D15 HP006-2-NFB ................. D5 MBR2104 ....................... E3 SV5Y-12C-20 ................ C30
C19-950-1601 .............. D15 HP006-2-NFC ................ D5 MCG001SS .................... E2 SV5Y-16C-20 ................ C30
C19-950-1602 .............. D15 HP006-2-NMB ................ D5 MCG002SS .................... E2 T5Y-4C .......................... C18
C19-950-1622 .............. D15 HP006-2-NMC ............... D5 MCG003SS .................... E2 T5Y-6C .......................... C18
C19-950-1623 .............. D15 HP006-2-NMD ............... D5 MCG005SS .................... E2 T5Y-9C .......................... C18
C19-950-1680 .............. D15 HP006-2-X13 ................. D5 MCG014-02-1523 .......... E2 T6Y-4C .......................... C25
CV5Y-4C-20 ................. C32 HP010-0-A12 ................. D6 MCG014-02-1524 .......... E2 T6Y-6C .......................... C25
CV5Y-6C-20 ................. C32 HP010-0-A16 ................. D6 MCGHS10-15 ................. E2 T6Y-9C .......................... C25
CV5Y-9C-20 ................. C32 HP010-0-LM12 ............... D6 MCGHS15-20 ................. E2 T5Y-12C ........................ C18
CV6Y-4C-60 ................. C36 HP010-0-NFD ................ D6 MCGHS20-30 ................. E2 T5Y-16C ........................ C18
CV6Y-6C-60 ................. C36 HP010-0-NMD ............... D6 MCGHS30-40 ................. E2 TV15Y-4C-20 ................ C32
CV6Y-9C-60 ................. C36 HP010-0-X23 ................. D6 MCGHS40-50 ................. E2 TV15Y-6C-20 ................ C32
E204UZD1 ................... B12 HP010-1-A12 ................. D7 MCGHS50-60 ................. E2 TV15Y-9C-20 ................ C32
E206JCC3 .................... B61 HP010-1-A16 ................. D7 MHBS012 ....................... E3 TV15Y-12C-20 .............. C32
E206JEC3 .................... B61 HP010-1-LM12 ............... D7 MHBS016 ....................... E3 TV15Y-16C-20 .............. C32
E213JFC4 .................... B66 HP010-1-LM9 ................. D7 MHDC010 ...................... E2 TV16Y-4C-30 ................ C34
E225JIC3 ...................... B70 HP010-1-NMD ............... D7 MHDC011 ...................... E2 TV16Y-4C-60 ................ C36
E408LCA2 .................... B81 HP010-1-X23 ................. D7 MHDC012 ...................... E2 TV16Y-6C-30 ................ C34
E408LCA3 .................... B81 HP010-2-A12 ................. D8 MHDC014 ...................... E2 TV16Y-6C-60 ................ C36
HP010-2-A16 ................. D8 MHDC016 ...................... E2 TV16Y-9C-30 ................ C34
HAHM4BM4 – HP010-2-NFD ................ D8 MHDC018 ...................... E2 TV16Y-9C-60 ................ C36
HPG6-23K-ORG HP010-2-NMD ............... D8 MHDC020 ...................... E2 TV25Y-4C-20 ................ C31
HAHM4BM4 ................. D15 HP010-2-X23 ................. D8 MHDC022 ...................... E2 TV25Y-6C-20 ................ C31
HBPHM4-B ................... C26 HP8-3 .......................... B119 MHDC024 ...................... E2 TV25Y-9C-20 ................ C31
HBPHM6-B ................... C26 HP8-4 .......................... B119 MHDC026 ...................... E2 TV25Y-12C-20 .............. C31
HBPHM9-B ................... C26 HP8-6 .......................... B119 MHDC032 ...................... E2 TV25Y-16C-20 .............. C31
HBPLM12-B ................. C19 HPG3-12K ....... B119, B121 MK022-03-038 ............... E3 TV26Y-4C-30 ................ C34
HBPLM16-B ................. C19 HPG3-12K-ORG ........ B119, MK022-03-039 ............... E3 TV26Y-4C-60 ................ C36
HBPLM4-B ................... C19 ............................. B121 MK022-03-041 ............... E3 TV26Y-6C-30 ................ C34
HBPLM6-B ................... C19 HPG3-23K ....... B119, B121 MK022-03-042 ............... E3 TV26Y-6C-60 ................ C36
HBPLM9-B ................... C19 HPG3-23K-ORG ........ B119, MK022-03-043 ............... E3 TV26Y-9C-30 ................ C34
HP-3 ............................. B119 ............................. B121 MK022-03-045 ............... E3 TV26Y-9C-60 ................ C36
HP-3-Gauge ................... E4 HPG4-12K ....... B119, B121 MSG060 .......................... E2
HP-4 ............................. B119 HPG-4-12K-ORG ....... B119, MSG1006 ....................... E2 WB-501-8FP –
HP-4-Gauge ................... E4 ............................. B121 MSG2006 ....................... E2 YAYA-16-16C
HP-6 ............................. B119 HPG4-23K ....... B119, B121 MSG2106 ....................... E2 WB-501-8FP ................. D17
HP-6-Gauge ................... E4 HPG-4-23K-ORG ....... B119, MSG4113 ....................... E2 WB-502-8FP ................. D17
HP006-0-A9 ................... D3 ............................. B121 MSG4120 ....................... E2 X5Y-4C .......................... C18
HP006-0-A12 ................. D3 HPG6-12K ....... B119, B121 MSG4125 ....................... E2 X5Y-6C .......................... C18
HP006-0-HM4 ................ D3 HPG6-12K-ORG ........ B119, MSG6020 ....................... E2 X5Y-9C .......................... C18
HP006-0-HM9 ................ D3 ............................. B121 MTM04T .......................... E3 X5Y-12C ....................... C18
HP006-0-LM6 ................. D3 HPG6-23K ....... B119, B121 X5Y-16C ....................... C18
HP006-0-NFB ................. D3 HPG6-23K-ORG ........ B119, PUF 011 – TV26Y-9C-60 X6Y-4C .......................... C25
HP006-0-NFC ................ D3 ............................. B121 PUF 010 ....................... B118 X6Y-6C .......................... C25
HP006-0-NMB ................ D3 PUF 011 ..................... B118 X6Y-9C .......................... C25
HP006-0-NMC ............... D3 L5Y-4C – MTM04T PUF 013 ..................... B118 Y2C-4C ......................... C19
HP006-0-NMD ............... D3 L5Y-4C .......................... C17 PUF 015 ..................... B118 Y2C-6C ......................... C19
HP006-0-X13 ................. D3 L5Y-6C .......................... C17 PUF 101 ..................... B118 Y2C-9C ......................... C19
HP006-1-A9 ................... D4 L5Y-9C .......................... C17 PUM 001 .................... B118 Y2C-12C ...................... C19
HP006-1-A12 ................. D4 L5Y-12C ........................ C17 PUM 002 .................... B118 Y2C-16C ...................... C19
HP006-1-HM4 ................ D4 L5Y-16C ........................ C17 PUM 004 .................... B118 Y2N-12C ...................... C19
HP006-1-LM6 ................. D4 L6Y-4C .......................... C25 PUM 005 .................... B118 Y2N-16C ...................... C19
HP006-1-LM9 ................. D4 L6Y-6C .......................... C25 PUM 009 .................... B118 Y2N-4C ......................... C19
L6Y-9C .......................... C25 SV5Y-4C-20 .................. C30

FluidConnectors
Alphanumeric Index
Y2N-6C ......................... C19 Y404-0300C ................. C26 Y5Y5-12-12C ............... C16 YA01-8-16C .................... C7
Y2N-9C ......................... C19 Y404-0400C ................. C26 Y5Y5-12-16C ............... C16 YA01-11-6C .................... C7
Y4C-4C ......................... C26 Y404-0600C ................. C26 YA01-11-8C .................... C7
Y4C-6C ......................... C26 Y404-0800C ................. C26 Y5Y6-4-4C ................... C16 YA01-11-12C .................. C7
Y4C-9C ......................... C26 Y404-1000C ................. C26 Y5Y6-4-6C ................... C16 YA01-11-16C .................. C7
Y4N-4C ......................... C26 Y404-1200C ................. C26 Y5Y6-4-9C ................... C16 YA01-16-12C .................. C7
Y4N-6C ......................... C26 Y406-0300C ................. C26 Y5Y6-6-4C ................... C16 YA01-16-8C .................... C7
Y4N-9C ......................... C26 Y406-0600C ................. C26 Y5Y6-6-9C ................... C16 YA01-16-16C .................. C7
Y4NC-4C-AV ................ C26 Y406-0800C ................. C26 Y5Y6-9-4C ................... C16 YA01-16-20C .................. C7
Y4NC-6C-AV ................ C26 Y406-1000C ................. C26 Y5Y6-9-9C ................... C16 YA01-16-24C .................. C7
Y4NC-9C-AV ................ C26 Y406-1200C ................. C26 Y5Y6-12-4C ................. C16 YA01-16-32C .................. C7
Y409-0400C ................. C26 Y5Y6-12-6C ................. C16
Y409-0600C ................. C26 Y5Y6-12-9C ................. C16 YA02-6-4C ...................... C6
Y409-0800C ................. C26 Y5Y6-16-4C ................. C16 YA02-6-8C ...................... C6
Y409-1000C ................. C26 Y5Y6-16-6C ................. C16 YA02-8-8C ...................... C6
Y409-1200C ................. C26 Y5Y6-16-9C ................. C16 YA02-11-8C .................... C6
Y501-4-4C .................... C17 Y601-4-2C .................... C23 YA6C-PLUG ................... C5
Y204-0275C ................. C19 Y501-4-8C .................... C17 Y601-4-4C .................... C23 YA8C-PLUG ................... C5
Y204-0300C ................. C19 Y501-6-4C .................... C17 Y601-4-6C .................... C23 YA11C-PLUG ................. C5
Y204-0400C ................. C19 Y501-6-6C .................... C17 Y601-4-8C .................... C23 YA16C-PLUG ................. C5
Y204-0600C ................. C19 Y501-6-8C .................... C17 Y601-4-12C .................. C23
Y204-0800C ................. C19 Y501-9-2C .................... C17 Y601-6-4C .................... C23 YAY1-8-16C .................... C5
Y204-1000C ................. C19 Y501-9-4C .................... C17 Y601-6-6C .................... C23 YAY1-11-16C .................. C5
Y204-1200C ................. C19 Y501-9-6C .................... C17 Y601-9-4C .................... C23 YAY1-16-16C .................. C5
Y501-9-8C .................... C17 Y601-9-6C .................... C23
Y206-0300C ................. C19 Y501-9-12C .................. C17 Y601-9-8C .................... C23 YAY2-8-16C .................... C5
Y206-0400C ................. C19 Y501-9-16C .................. C17 Y601-9-12C .................. C23 YAY2-11-16C .................. C5
Y206-0600C ................. C19 Y501-12-2C .................. C17 Y601-9-16C .................. C23 YAY2-16-16C .................. C5
Y206-0800C ................. C19 Y501-12-4C .................. C17
Y206-1000C ................. C19 Y501-12-6C .................. C17 Y6Y6-4-4C ................... C22 YAY5-6-4C ...................... C6 G
Y206-1200C ................. C19 Y501-12-8C .................. C17 Y6Y6-4-6C ................... C22 YAY5-6-6C ...................... C6
Y501-12-12C ................ C17 Y6Y6-4-9C ................... C22 YAY5-6-9C ...................... C6
Y209-0400C ................. C19 Y501-12-16C ................ C17 Y6Y6-6-6C ................... C22 YAY5-6-12C .................... C6
Y209-0600C ................. C19 Y501-16-2C .................. C17 Y6Y6-6-9C ................... C22 YAY5-8-6C ...................... C6
Y209-0800C ................. C19 Y501-16-12C ................ C17 Y6Y6-9-9C ................... C22 YAY5-8-9C ...................... C6
Y209-1000C ................. C19 Y501-16-16C ................ C17 YAY5-8-12C .................... C6
Y209-1200C ................. C19 Y501-16-4C .................. C17 YA01-6-2C ...................... C7 YAY5-11-6C .................... C6
Y501-16-6C .................. C17 YA01-6-4C ...................... C7 YAY5-11-9C .................... C6
Y212-0400C ................. C19 Y501-16-8C .................. C17 YA01-6-6C ...................... C7 YAY5-11-12C .................. C6
Y212-0600C ................. C19 YA01-6-8C ...................... C7 YAY5-16-9C .................... C6
Y212-0800C ................. C19 Y5Y5-4-4C ................... C16 YA01-8-4C ...................... C7 YAY5-16-12C .................. C6
Y212-1000C ................. C19 Y5Y5-4-6C ................... C16 YA01-8-6C ...................... C7
Y212-1200C ................. C19 Y5Y5-4-12C ................. C16 YA01-8-8C ...................... C7 YAY6-6-4C ...................... C4
Y5Y5-4-16C ................. C16 YA01-8-12C .................... C7 YAY6-6-6C ...................... C4
Y216-0600C ................. C19 Y5Y5-6-6C ................... C16 YAY6-6-9C ...................... C4
Y216-0800C ................. C19 Y5Y5-6-9C ................... C16 YAY6-8-6C ...................... C4
Y216-1000C ................. C19 Y5Y5-6-12C ................. C16 YAY6-8-9C ...................... C4
Y216-1200C ................. C19 Y5Y5-6-16C ................. C16 YAY6-10-6C .................... C4
Y5Y5-9-9C ................... C16 YAY6-10-9C .................... C4
Y404-0275C ................. C26 Y5Y5-9-12C ................. C16 YAY6-11-9C .................... C4
Y5Y5-9-16C ................. C16
YAYA-6-6C ...................... C4
YAYA-8-6C ...................... C4
YAYA-8-8C ...................... C4
YAYA-10-6C .................... C4
YAYA-10-10C .................. C4
YAYA-11-8C .................... C4
YAYA-11-11C .................. C4
YAYA-16-11C .................. C4
YAYA-16-16C .................. C4

FluidConnectors
Alphanumeric Index Notes

FluidConnectors
Alphanumeric Index Notes

FluidConnectors
Alphanumeric
Offer of Sale Index
The items described in this document are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized
distributors. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions. Buyer’s order for any item
described in this document, when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor (“Seller”) verbally or in writing, shall
constitute acceptance of this offer.
1. Terms and Conditions of Sale: All descriptions, quotations, proposals, 8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,
offers, acknowledgments, acceptances and sales of Seller’s products are confidential information or equipment furnished by Buyer, or any other
subject to and shall be governed exclusively by the terms and conditions. items which become Buyer’s property, may be considered obsolete and
Any terms or conditions in addition to, or inconsistent with those stated may be destroyed by Seller after two (2) consecutive years have elapsed
herein, proposed by Buyer in any acceptance of an offer by Seller, are without Buyer placing an order for the items which are manufactured
hereby objected to. No such additional, different or inconsistent terms using such property. Seller shall not be responsible for any loss or
and conditions shall become part of the contract between Buyer and damage to such property while it is in Seller’s possession or control.
Seller unless expressly accepted in writing by Seller. Seller’s acceptance
of any offer to purchase by Buyer is expressly conditional upon Buyer’s 9. Taxes: Unless otherwise indicated on the face hereof, all prices and
assent to all the terms and conditions stated herein, including any terms charges are exclusive of excise, sales, use, property, occupational or like
in addition to, or inconsistent with those contained in Buyer’s offer. taxes which may be imposed by any taxing authority upon the
Acceptance of Seller’s products shall in all events constitute assent. manufacture, sale or delivery of the items sold hereunder. If any such
taxes must be paid by Seller, or if Seller is liable for the collection of such
2. Payment: Payment shall be made by Buyer net 30 days from the date of tax, the amount thereof shall be in addition to the amounts for the items
delivery of the items purchased hereunder. Amounts not timely paid shall sold. Buyer agrees to pay all such taxes or to reimburse Seller therefor
bear interest at the rate of 1-1/2% for each month or a portion thereof upon receipt of its invoice. If Buyer claims exemption from any sales, use
that Buyer is late in making payment. Any claims by Buyer for omissions or other tax imposed by any taxing authority, Buyer shall save Seller
or shortages in a shipment shall be waived unless Seller receives notice harmless from and against any such tax, together with any interest or
thereof within 30 days after Buyer’s receipt of the shipment. penalties thereon which may be assessed if the items are held to be
taxable.
3. Delivery: Unless otherwise provided on the face hereof, delivery shall be
made F.O.B. Seller’s plant. Regardless of the method of delivery, 10. Indemnity For Infringement of Intellectual Property Rights: Seller
however, risk of loss shall pass to Buyer upon Seller’s delivery to a shall have no liability for infringement of any patents, trademarks,
carrier. Any delivery dates shown are approximate only and Seller shall copyrights, trade dress, trade secrets or similar rights except as provided
have no liability for delays in delivery. in this Part 10. Seller will defend and indemnify Buyer against allegations
of infringement of U.S. patents, U.S. trademarks, copyrights, trade dress
4. Warranty: Seller warrants that the items sold hereunder shall be free and trade secrets (hereinafter ‘Intellectual Property Rights’). Seller will
from defects in materials or workmanship for a period of 365 days from defend at its expense and will pay the cost of any settlement or damages
the date of shipment to Buyer, or 2,000 hours of use, whichever expires awarded in an action brought against Buyer based on an allegation that
first. THIS WARRANTY COMPRISES THE SOLE AND ENTIRE an item sold pursuant to this contract infringes the Intellectual Property
WARRANTY PERTAINING TO ITEMS PROVIDED HEREUNDER. Rights of a third party. Seller’s obligation to defend and indemnify Buyer
SELLER MAKES NO OTHER WARRANTY, GUARANTEE, OR is contingent on Buyer notifying Seller within ten (10) days after Buyer
REPRESENTATIONS OF ANY KIND WHATSOEVER. ALL OTHER becomes aware of such allegations of infringement, and Seller having
WARRANTIES, INCLUDING BUT NOT LIMITED TO, sole control over the defense of any allegations or actions, including all
MERCHANTABILITY AND FITNESS FOR PURPOSE, WHETHER negotiations for settlement or compromise. If an item sold hereunder is
EXPRESS, IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE subject to a claim that it infringes the Intellectual Property Rights of a
USAGE, OR COURSE OF DEALING ARE HEREBY DISCLAIMED. third party, Seller may, at its sole expense and option, procure for Buyer
the right to continue using said item, replace or modify said item so as to
NOTWITHSTANDING THE FOREGOING, THERE ARE NO make it noninfringing, or offer to accept return of said item and return the
WARRANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED purchase price less a reasonable allowance for depreciation.
WHOLLY OR PARTIALLY, TO BUYER’S DESIGNS OR
SPECIFICATIONS. Notwithstanding the foregoing, Seller shall have no liability for claims of
infringement based on information provided by Buyer, or directed to items
5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR IN delivered hereunder for which the designs are specified in whole or part
ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT by Buyer, or infringements resulting from the modification, combination or
SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT use in a system of any item sold hereunder. The foregoing provisions of
OF THE ITEMS SOLD, OR REFUND OF THE PURCHASE PRICE PAID this Part 10 shall constitute Seller’s sole and exclusive liability and
BY BUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL Buyer’s sole and exclusive remedy for infringement of Intellectual
SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR Property Rights.
SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER,
INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM If a claim is based on information provided by Buyer or if the design for
OR IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS an item delivered hereunder is specified in whole or in part by Buyer,
SOLD HEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH Buyer shall defend and indemnify Seller for all costs, expenses or
OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, judgements resulting from any claim that such an item infringes any
INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO patent, trademark, copyright, trade dress, trade secret or any similar
WARN OR STRICT LIABILITY. right.
6. Changes, Reschedules and Cancellations: Buyer may request to 11. Force Majeure: Seller does not assume the risk of and shall not be
modify the designs or specifications for the item sold hereunder as well liable for delay or failure to perform any of Seller’s obligations by reason
as the quantities and delivery dates thereof, or may request to cancel all of circumstances beyond the reasonable control of Seller (hereinafter
or part of this order, however, no such requested modification or ‘Events of Force Majeure’). Events of Force Majeure shall include
cancellation shall become part of the contract between Buyer and Seller without limitation, accidents, acts of God, strikes or labor disputes, acts,
unless accepted by Seller in a written amendment to this Agreement. laws, rules or regulations of any government or government agency, fires,
Acceptance of any such requested modification of cancellation shall be at floods, delays or failures in delivery of carriers or suppliers, shortages of
Seller’s discretion, and shall be upon such terms and conditions as Seller materials and any other cause beyond Seller’s control.
may require.
12. Entire Agreement/Governing Law: The terms and conditions set forth
7. Special Tooling: A tooling charge may be imposed for any special herein, together with any amendments, modifications and any different
tooling, including without limitation, dies, fixtures, molds and patterns, terms or conditions expressly accepted by Seller in writing, shall
acquired to manufacture items sold pursuant to this contract. Such constitute the entire Agreement concerning the items sold, and there are
special tooling shall be and remain Seller’s property notwithstanding no oral or other representations or agreements which pertain thereto.
payment of any charges therefor by Buyer. In no event will Buyer acquire This Agreement shall be governed in all respects by the law of the State
any interest in apparatus belonging to Seller which is utilized in the of Ohio. No actions arising out of the sale of the items sold hereunder or
manufacture of the items sold hereunder, even if such apparatus has this Agreement may be brought by either party more than two (2) years
been specially converted or adapted for such manufacture and after the cause of action accrues.
notwithstanding any charges paid by Buyer therefor. Unless otherwise
agreed, Seller shall have the right to alter, discard or otherwise dispose
of any special tooling or other property in its sole discretion at any time.

FluidConnectors

4900 - US - 2006 - POLIFLEX Hose Products

Uploaded by

Copyright:

Available Formats

4900 - US - 2006 - POLIFLEX Hose Products

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

4900 - US - 2006 - POLIFLEX Hose Products

Uploaded by

Copyright:

Available Formats

Catalog 4900 polyflex ®

General Information ................................................... Section A A

polyflex® Hose and Fittings ................................ Section B B

High Pressure Adapters and Valves .......................... Section C C

Quick Couplings ........................................................ Section D D

Accessories/Tooling ................................................... Section E E

Technical Information................................................. Section F F

Alphanumeric Index ................................................... Section G G

Offer of Sale ......................................................................... G8

i Parker Hannifin Corporation

ii Parker Hannifin Corporation

Table of Contents – Section A

A1 Parker Hannifin Corporation

A2 Parker Hannifin Corporation

Hose Selection Chart

A3 Parker Hannifin Corporation

Hose Selection Chart

A4 Parker Hannifin Corporation

Hose Selection Chart

A5 Parker Hannifin Corporation

Hose Selection Chart

A6 Parker Hannifin Corporation

Hose Selection Chart

A7 Parker Hannifin Corporation

Hose Selection Chart

A8 Parker Hannifin Corporation

Hose Fitting Chart

National Pipe Tapered(NPT) Female Fitting 02

JIC Female Swivel Fitting 06

Type “M” Female Swivel Fitting AY

BSP Female Swivel Fitting BC or 92

Metric Female Swivel Fitting C3 or C9

BSP Male Fitting D9 or 3B

Male Stecko Fitting MB

Tube Stub Fitting TU

A9 Parker Hannifin Corporation

Hose Fitting Chart

Male Water Jetting Nozzle ZE or 3Z

Medium Pressure Female Swivel 5Y

High Pressure Female Swivel 6Y

Right Hand Female for Water Jetting Nozzle Fitting HY-RH

Left Hand Female for Water Jetting Nozzle Fitting HY-LH

2" Hammer Union (Male) Cone with Wing Nut HE

2" Hammer Union (Female) Cone Threaded End HN

A10 Parker Hannifin Corporation

Hose Fitting Chart

Medium Pressure Tube Nipple Y2

A11 Parker Hannifin Corporation

Hose Fitting Guide

A12 Parker Hannifin Corporation

Hose Part Numbering System A

Hose Core Hose I.D. Design

Hose End Fitting Part Numbering System

Mfg. Connection Hose Series Connection

A13 Parker Hannifin Corporation

How to Order polyflex Hose Assemblies

A14 Parker Hannifin Corporation

Explanation of Symbols Used in

Symbol Definition Symbol Definition