OF

TE O

H
ST

IO
ANDREW D.
TOROWSKI

ECT
R EG
CEILING LEGEND 14836
GYPSUM BOARD METAL SUSPENSION SYSTEMS

IT
IS
AS MFG BY THE UNITED STATES GYPSUM COMPANY (USG) TE H
OR APPROVED EQUAL. R E D A RC

LINEAR DIFFUSER PERFORMANCE REQUIREMENTS: FABRICATE AND INSTALL

24" X 36" SUSPENDED SYSTEMS AS INDICATED BUT NOT LESS THAN THAT REQUIRED TO COMPLY WITH ASTM C754 UNDER THE FOLLOWING GENERAL NOTES:
1
CONDITIONS: INTERIOR SUSPENDED CEILINGS AND SOFFITS. MAXIMUM DEFLECTION OF 360 OF DISTANCE BETWEEN
CEILING GRID SYSTEM METAL SUPPORTS.
1. CONTRACTOR TO FIELD VERIFY ALL DIMENSIONS AND EXISTING CONDITIONS BEFORE
SUBMITTING A BID PROPOSAL. DELETIONS FROM DRAWINGS WILL NOT BE ACCEPTED
AS JUST CAUSE FOR CHANGING THE CONTRACT COST. DRAWINGS ARE INTENDED TO
CEILING SUPPORT MATERIAL:
S.A. GRILLE SHOW AREAS OF WORK AND DESIGN INTENT ONLY.
A. HANGER ANCHORAGE DEVICES: SCREWS, CLIPS, BOLTS OR OTHER DEVICES COMPATIBLE WITH INDICATED
2. CONTRACTOR IS RESPONSIBLE FOR ALL SECURITY AND WEATHER-PROOFING
STRUCTURAL ANCHORAGE FOR CEILING HANGERS AND WHOSE SUITABILITY HAS BEEN PROVEN THROUGH
PAINTED GYPSUM BD. STANDARD CONSTRUCTION PRACTICES OR BY CERTIFIED TEST DATA.
RELATED ITEMS DURING CONSTRUCTION. INTENDED MATERIALS AND COURT SYSTEM MUST BE
APPROVED BY ARCHITECT. ANY DAMAGE TO EXISTING STRUCTURE OR INTERIOR DUE TO
B. HANGERS: STEEL WIRE OR RODS, SIZES TO COMPLY WITH REQUIREMENTS OF ASTM C754 FOR CEILING OR WIRE:
NEGLECT MUST BE REPAIRED BY THE CONTRACTOR.
ASTM A641, SOFT, CLASS 1 GALVANIZED RODS AND FLATS: MILD STEEL COMPONENTS. GALVANIZED OR PAINTED
WITH RUST INHIBITIVE PAINT FOR INTERIOR WORK.
3. CONTRACTOR TO MAINTAIN SITE IN A NEAT AND ORDERLY MANNER FOR EXTENT OF
R.A. GRILLE C. FRAMING SYSTEM: MAIN RUNNERS: COLD ROLLED. "C" SHAPED STEEL CHANNELS, 16 GAUGE MINIMUM
CONSTRUCTION.
RECESSED CAN LIGHT D. FINISH: GALVANIZED OR PAINTED WITH RUST INHIBITIVE PAINT
E. CROSS FURRING: HAT-SHAPED STEEL FURRING CHANNELS, ASTM C645, 78 INCH HIGH, 25 GAUGE, GALVANIZED
F. FURRING ANCHORAGE: 16 GAUGE GALVANIZED WIRE TIES MANUFACTURER'S STANDARD WIRE TYPE CLIPS,
BOLTS, NAILS OR SCREWS RECOMMENDED BY FURRING MANUFACTURER AND COMPLYING WITH ASTM C754.
G. METAL SUPPORT INSTALLATION: SECURE HANGERS OR RODS ATO STRUCTURAL SUPPORT BY CONNECTING
EXIT LIGHT DIRECTLY TO STRUCTURE WHERE POSSIBLE: OTHERWISE CONNECT TO INSERTS, CLIPS OR OTHER ANCHORAGE
DEVICES OR FASTENER, AS INDICATED. SPACE MAIN RUNNERS, HANGERS AND FURRING ACCORDING TO
PENDENT FIXTURE REQUIREMENTS OF ASTM C754
H. WHERE SPACING OF STRUCTURAL MEMBERS, OR WIDTHS OR OTHER DUCT EQUIPMENT, PREVENTS REGULAR
SPACING OF HANGERS, PROVIDE SUPPLEMENTAL HANGERS AND SUSPENSION MEMBERS AND REINFORCE
NEAREST AFFECTED HANGERS TO SPAN EXTRA DISTANCE.

DATE

5/5/20
REVISION
B B

ADDENDUM 2
2

NO

2
1'-0"
TYP

TYP.
2'-0"
B B

DESIGNED BY:

CHECKED BY:
ISSUED FOR:

ISSUE DATE:

DRAWN BY:
SCALE:
LAKETRAN WICKLIFFE PARK-N-RIDE LOT
G

29610 LAKELAND BLVD., WICKLIFFE, OH 44092

CE G
B B B

CEILING AND FRAMING PLAN

(3) 1-3/4" X 14"
C
LVL HEADER

B C G

GE

(3) 2 X 12'S
LVL HEADER 2 X 12 @ 16" O.C.
B RAFTERS
CE
(2) 2 X 12'S

2x12"s @ 12" OC
GE G
D D
(2) 2 X 12'S
C (2) 2 X 12'S
C

CE

(3) 1-3/4" X 14"

LVL HEADER
CE GE

REFLECTED CEILING PLAN

SCALE: 1/4" = 1'-0"
N FRAMING PLAN
SCALE: 1/4" = 1'-0"
N 190065
PROJECT NO.

DISCIPLINE

ARCHITECTURAL
SHEET NAME

A-02
SHEET OF

34 49
\\CTC.LOCAL\CT_DATA\PROJECTS\2019\190065\DWG\SHEETS\A_190065 - CEILING AND FRAMING PLAN.DWG - 34 CEILING AND FRAMING PLAN - 5/4/2020 10:03:17 AM - ANDREW TOROWSKI