Hazard Job Application Approving and Area

certifying

fiber/composite toe safety

Impact-heavy objects shoes, mandatory for High Ankle Safety Shoe Smelter & Mines
everyone to enter to with Composite Toe
smelter/mines premises

Compression-rolling or
Leather boots or safety shoes High
Ankle Safety Shoe
pinching objects/ vehicles with Composite Toe Smelter & Mines

High Ankle Safety Shoe Smelter & Mines

Slippery or wet surface Slip resistant soles with Composite Toe

Antistatic Slip Resistant High Ankle shoe with Only applicable

Slip Resistant
Safety shoes Composite Toe in Mines

fiber/composite toe safety

High Ankle Safety Shoe
shoes, mandatory for
Impact-heavy objects with Fiber Toe/ Smelter & Mines
everyone to enter to
smelter/mines premises Composite Toe

_x000D_ Sensitivity: Internal (C3)

#
 Chemical resistant
Penetration-chemical Gum Boots Smelter & Mines
boots/covers

Splashing-chemical Rubber boots/ closed top Gum Boots Smelter & Mines
shoes

Exposure to extreme cold

Insulated boots or shoes Gum Boots Smelter & Mines
Other:

_x000D_ Sensitivity: Internal (C3)

#
 Make Model photo

Liberty WARRIOR

Bata Eagle and BS 2013

Allen Cooper AC1625//AC 1416

Delta Plus Jumper3 S3

PERF NORRIS - H

_x000D_ Sensitivity: Internal (C3)

#
 14 INCH BLACK,
DUCKBACK
GREY COLOUR

Liberty WARRIOR

Bata 802-6224

_x000D_ Sensitivity: Internal (C3)

#
 Specification/Long text Maintenance and Technical Remark
rejection criteria

OK

SHOE,SAFETY,DESIGN STANDARD:
BIS/EN345/344,TYPE: HIGH
ANKLE,ACCESSORIES:
WITH FIBER TOE,MATERIAL:
LEATHER,CHEMICAL RESISTANCE:
ACID,OIL,HEAT,POWER PROOF: SHOCK,SIZE:
NO.4/5/6/7/8/9/10/11/12

OK

On wear/tear or 1 year
whichever is earlier

OK

Pigmented split leather boots - Water resistant

treatment, polyamide mesh lining, Polyster on EVA OK
Insole, Dual Density PU.

SAFETY SHOES; STEEL TOW CAP; PU DOUBLE

DENSITY SOLE;BREATHABLE POLYAMIDE On wear/tear or 1 year
OK
LINING;NON MAGNETIC MID SOLE;PLOYAMIDE whichever is earlier
LINING

_x000D_ Sensitivity: Internal (C3)

#
 On wear/tear or 1 year
OK
whichever is earlier

SHOE,SAFETY,DESIGN STANDARD: IS
12255,TYPE: GUM BOOT,ACCESSORIES: WITH S
STEEL TOE,MATERIAL: VIRGIN POLYVINYL
CHLORIDE,CHEMICAL RESISTANCE: ACID,
ALKALI,POWER PROOF: ELECTRIC SHOCK,COLOR: On wear/tear or 1 year OK
BLACK,SIZE: NO.6/7/8/9/10/11, HEIGHT: whichever is earlier
14,STOCK NET LINING,ANTI SKID FOR FIRM WITH
TO AVOID SKIDDING ON WET SURFACE

On wear/tear or 1 year
OK
whichever is earlier

_x000D_ Sensitivity: Internal (C3)

#
 Hazard Job Application Approving and Area
certifying

Flying particles, Dust and To be used by people who are

Safety overspecs Mines/ Smelter
foreign paticles using prescribed specs

Mines/ Smelter

Flying particles, Dust and To be used by people who are

foreign paticles having prescribed glasses Power Goggles Mines/ Smelter

Mines/ Smelter

To be used in chemical splash

Chemical Splash, Gas tight, potential areas, reagent areas Splash proof goggles Mines/ Smelter
impact and dust proof etc. where there is a chance of
splash
 To be used in chemical splash
Chemical Splash, Gas tight, potential areas, reagent areas Splash proof goggles
Mines/ Smelter
impact and dust proof etc. where there is a chance of
splash

Mines/ Smelter

Mines/ Smelter

Mines/ Smelter

Industrial type general

purpose Anti Fog and clear General purpose glasses
Flying particles, Dust and foreign paticles
goggles, to be used for general Anti Fog type and clear
purpose
Mines/ Smelter
Mines/ Smelter

Smelter/Mines
 Make Model photo

Karam ES007 Z87+ clear

& Antifog (Both)

Unicare UEE181

MSAFE SAF i

SAVIOUR EYSAV - PR01

GKB MI 27

Unicare UEE172
 3M 2890A

SF401AF & &

3M SF3701AS

ES015 Clear and

Karam
Antifog (Both)

UVEX UVEX PHEOS CX2

1011027 HS – New
Honeywell XC
 Unicare UPS99

Delta Plus AS02 Clear

 Specification/Long text Maintenance and
rejection criteria

GOGGLES,SAFETY,MANUFACTURER MODEL : G-103,OVERSPECT

GLASSES, COLOR:CLEAR WHITE, ZERO POWER LENS, CLEAR
HARD COATED POLYCARBONATE MATERIAL,99.9 % UV
Damage, scratch or vision
PROTECTION, FRAMELESS DESIGN, CLEAR INBUILT NOSE
blur
BRIDGE WHICHGIVES COMFORT SHOULD BE WORN EASILY
OVER OTHER GLASSES

ACCESSORIES,SAFETY,TYPE: GOGGLE,POWER,APPLICATION:
EYE,COLOR:TRANSPARANT,MODERATE IMPACT RESISTANT
PLANO LENS, LENS MATERIAL: POLYCARBONATE, FRAME Damage, scratch or vision
blur
COLOUR: BLACK

CLI Approved lens;COMFORTABLE AN FLEXIBLE; SCRATCH

RESISTANT;IMPACT RESISTANT;PREGRESSIVE LENS;UV Damage, scratch or vision
blur
PROTECTION

ACCESSORIES,SAFETY,TYPE: GOGGLE,POWER,APPLICATION:
EYE,COLOR:TRANSPARANT,MODERATE IMPACT RESISTANT
Damage, scratch or vision
PLANO LENS, LENS MATERIAL: POLYCARBONATE, FRAME
blur
COLOUR: BLACK

GOGGLES,SAFETY,LENS MATERIAL: POLYCARBONATE,ACID

SPLASH PROOF-GAS TIGHT,,SUPER VISION,EXTREMELY
SCRATCH RESISTANT OUT SIDE NON FOGY & UVEX,ULTRASONIC
VISION: UEE160 (UNICARE) OR ITS EQUIVALENT,SHOULD BE
APPROVED BY ISI,PROTECTION FROM CHEMICAL
SPLASH,IMPACT & DUST

Damage, scratch or vision

blur
 Damage, scratch or vision
blur

GOGGLES,SAFETYTYPE: ANTI-FOG ANTI STATIC

SCRATCH,STYLE: SPECTACLE,LENSMATERIAL:
GLASS/PLASTIC,LENS COATING: ULTRADURA,FRAME
COLOR:BLACK,MANUFACTURER MODEL : 9170861,MAKE: 3M

Damage, scratch or vision

blur

GOGGLES,SAFETY, TYPE:ANTI-FOG ANTI STATIC SCRATCH,

FRAME COLOR:BLUE,NEW XC WITH HYDROSHIELD (CLEAR
HYDROSHIELD COATING ), LENS MATERIAL: POLYCARBONATE,
FRAME MATERIAL: PLASTIC, LENS COATING: HONEYWELL
Damage, scratch or vision
HYDROSHIELD, CERTIFICATIONS: EC CERTIFICATE NUMBER: blur
EC1144, STANDARD(S): EN166:200-EC CATEGORY PPE: 2-
QUALITY ASSURANCE: ISO 9001 / 2000, LENS
COATING: CLEAR/GRAY/AMBER( 10 110 27 HS/10 1110 25
HS/10 129 00 HS )
GOGGLES,SAFETY,LENS MATERIAL: POLYCARBONATE,LENS
TINT: CLEAR,APPLICATION N: GENERAL PURPOSE,LIGHT
WEIGHT: 26 GM,SCRATCH RESISTANCE,HIGH ABSORPTION OF Damage, scratch or vision
blur
UV RADIATION, COLOURLESS GLASSES WITH SIDE
PROTECTION,MM: UPS 99

Anti slip, anti scratch, Plycarbonate lens and frame material.

Damage, scratch or vision
Lens: clear, application : General works, Leight weigh t- 28 Kg.
blur
anti scratch and antifog lens
 Approving
Hazard Job Application and Area Make
certifying

Cut resistant
Smelter &
gloves (Cut VALPRO
Mines
Level-5)

Cut resistant
Smelter & JOSEPH
gloves (Cut
Mines LESLIE
Level-5)
For protection against
Penetration-sharp objects, mechanical
Penetration-animal bites hazard, cut & abraision
resistance
Cut resistant Smelter &
gloves (Cut Ansell
Mines
Level-5)

Cut resistant
Smelter &
gloves (Cut Mines Lakeland
Level-5)

Cut resistant
gloves (Cut Smelter & Ansell
Level-3) Mines

Cut resistant
Smelter &
gloves (Cut Honeywell
Mines
Level-3)

Cut resistant
Smelter &
gloves (Cut Lakeland
For protection against Mines
Level-3)
Penetration-sharp objects, mechanical
Penetration-animal bites hazard, cut & abraision
resistance
 For protection against
Penetration-sharp objects, mechanical
Penetration-animal bites hazard, cut & abraision
resistance

Cut Resistant
Smelter &
Gloves ( Cut Mines Atlas
Level - 3)

Cut Resistant
Smelter &
Gloves ( Cut Delta Plus
Mines
Level - 3)

General
purpose work Smelter & JOSEPH
gloves (Cut Mines LESLIE
Level-1)

General
purpose work Smelter &
gloves (Cut Mines Lakeland
Level-1)

General
purpose work Smelter &
gloves (Cut Mines Lakeland
Level-1)

General
purpose work Smelter &
Ansell
gloves (Cut Mines
Level-1)

Penetration-rough objects General

maintenance/handling work
General
purpose work Smelter & Lakeland
gloves (Cut Mines
Level-1)
 General
purpose work Smelter &
Karam
gloves (Cut Mines
Level-1)

General
purpose work Smelter &
Delta Plus
gloves (Cut Mines
Level-1)

General
purpose work Smelter & Delta Plus
gloves (Cut Mines
Level-1)

Chemical
resistant PVC Smelter
& JOSEPH
gloves Mines LESLIE

Handling acid, alkali & other Chemical

resistant PVC Smelter
&
chemicals Mines Ansell
gloves

Chemical
Smelter &
resistant PVC Mines Atlas
gloves

Nitrile hand Smelter & JOSEPH

Chemical gloves Mines LESLIE

Nitrile hand Smelter &

LAKELAND
gloves Mines

Handling oil/solvents &

chemicals of low
concentration like spent
 Handling oil/solvents &
chemicals of low
concentration like spent
Nitrile hand Smelter &
Ansell
gloves Mines

Nitrile hand Smelter &

Delta Plus
gloves Mines

Heat resistant Smelter &

Leather hand Mines Weldohard
gloves

For protection against

welding , hot Heat resistant Smelter &
Extreme heat Leather hand MESSAR
jobs, Welding application Mines
gloves

Canadian Smelter &

hand gloves Mines Weldohard

MESSAR

For handling hot/molten Heat resistant

Molten Metal metal in melting casting, ISF, Leather hand Smelter
LRP, ZRP area gloves
 For handling hot/molten Heat resistant
Molten Metal metal in melting casting, ISF, Leather hand Smelter
LRP, ZRP area gloves

Weldohard

Latex/
Smelter & JOSEPH
surgical Mines LESLIE
gloves

Latex/ Smelter &

Working in laboratory, testing surgical Lakeland
Blood gloves Mines
machine

Latex/ Smelter &

surgical Ansell
gloves Mines

Cotton,
leather, or Smelter & Ansell
anti- vibration Mines
gloves

Construction work with hand Cotton,

grinder, power tools, leather, or Smelter &
Superior
Vibration different vibrating tool, anti- vibration Mines
impact hammer, jack gloves
hammer, drilling,
 grinder, power tools,
Vibration different vibrating tool,
impact hammer, jack
hammer, drilling,

Cotton,
leather, or Smelter &
B&D
anti- vibration Mines
gloves
 Model photo Specification/Long text

GLOVES - PU Coated, HS
RANGER Nylon/Glass/Spandex liner material.
ACTIVCUT ABRASION RESISTANCE - 4
CA3 TEAR RESISTANCE - 4

C1400

GLOVES,PROTECTIVE,TYPE:
HAND,SEAMLESS,INTERNAL MATERIAL:
COTTON,EXTERNAL, MATERIAL: RUBBER,
EDGE 48-703, CUFF STYLE: ELASTIC,LENGTH: 250
EDGE 48-705 MM,KNITTED COTTON, WITH RUBBER
COATING, THE BACK OF GLOVES ARE
UNCOATED HAS UNIFORM FINISH FOR
ENHANCED GRIP, CUT, ABRASION,
PUNCTURE AND TEAR RESISTANCE, EN
STANDARD APPROVED

96-5205

Hyflex 11-
738

GLOVES; TYPE:
PROTECTIVE,HAND,GLOVES, STANDARD:
CUT LEVEL-3; TYPE: HAND ,RESISTANCE
WE22-
LEVEL3, ABRASION RESISTANCE LEVEL4,
7313G-9L
PUNCTURE RESISTANCE LEVEL3 AND
TEAR RESISTANCE LEVEL4,NITRILE
COATED

96-5202
 Cypress
GIA003

MECHANICAL KNITTED GLOVE WITH

SMOOTH NITRILE COATING.
ABRASION RESISTANCE - 3
VENICUT 33
TEAR RESISTANCE - 4
PIERCE RESISTANCE - 3
CUT RESISTANCE - B

PU1003

NitroGaurd
202

GLOVES,PROTECTIVE, TYPE:HAND,
APPLICATION:GENERAL
Black PU PURPOSE,SEAMLESS
Style KNITTED POLYESTER SHELL BLACK PU
73104 COATED GLOVES, FOR GENERAL
ASSEMBLY,
PRECISION JOBS, HANDLING SMALL
OBJECTS, PACKING AND WAREHOUSE,
MATERIAL
COATING: PU, LINER: POLYESTER, ELASTIC:
Hyflex 11- NATURAL RUBBER, EN-388 BY SGS,
801 ABRASION RESISTANCE LEVEL-3, CUT
RESISTANCE LEVEL-1, TEAR RESISTANCE
LEVEL-3, PUNCTURE RESISTANCE LEVEL-1

Grey Nitrile
 HS22

Mechanical knitted coated single layer glove.

Abrasion Resistance - 3
VE702PN Cut Resistance - 1
Tear Resistance - 2
Polyurethane coating for grip

Mechanical knitted coated single layer glove

WITH SMOOTH NITRILE COATING
VE712GR Abrasion Resistance - 3
Cut Resistance - 1
Tear Resistance - 2
Polyurethane coating for grip

POLYSOL

GLOVES,PROTECTIVE,TYPE: HAND,ACID
PROOF,EXTERNAL MATERIAL: POLYVINYL
CHLLORIDE/RUBBER,SIZE: 16 INCH,WITH
LINING SAVIOUR PVC
SOLVEX 37-
185 SUPPORTED,CONCENTRATED CHEMICAL
RESISTANT (ACID/ALKALI PROOF),MADE
FROM SUPERIOR QUALITY PVCINSIDE
COTTON REINFORCEMENT,FOR BETTER
GRIP AND LONGER LIFE

Starfish Plus

JLNF15
GLOVES,PROTECTIVE,TYPE:
HAND,COATING: NITRILE LATEX,FULL
DOUBLE DIPPED,C
COATING ON 100% COTTON JERSEY WITH
KNITTED WRIST WITH STANDARD: EN-
Nitrosol EN
388,A
15 F
PPROVAL AND CE MARKED,SUITABLE FOR
ABRASION,CUT AND PUNCTURE
RESISTANCE, HANDLING
OIL,CHEMICALS,SOLNITRILE LATEX
COATED HAND GLOVES
 KNITTED WRIST WITH STANDARD: EN-
388,A
PPROVAL AND CE MARKED,SUITABLE FOR
ABRASION,CUT AND PUNCTURE
RESISTANCE, HANDLING
OIL,CHEMICALS,SOLNITRILE LATEX
COATED HAND GLOVES
SOLVEX 37-
185

GLOVES,PROTECTIVE,TYPE:
HAND,COATING: SMOOTH NITRILE FULLY
NITREX COATED, SINGLE LAYER SILICON FREE,
VE801 ABRASION RESISTANCE - 3, CUT
RESISTANT - 1, HANDLING OIL, CHEMICAL
GLOVES

GLOVES,PROTECTIVE, TYPE:HAND
FOR HOT SAFETY,SAFE WELD,
WORK APPLICATION:WELDING,EXTERNAL
MATERIAL:SPLIT CHROME
LEATHER,PREMIUM QUALITY SPLIT
CHROMELEATHER WELDING GLOVE, FOR
MIG/ARC WELDING, PROVIDES
PROTECTION FROMMINOR SPLASHES OF
MOLTEN METAL, PROTECTION FROM
MECHANICAL HAZARDS, EN388 ABRASION
RESISTANCE LEVEL-4, CUT RESISTANCE
LEVEL-1, TEAR RESISTANCELEVEL-4,
FOR HOT PUNCTURE RESISTANCE LEVEL-3, EN-407
WORK BURNING BEHAVIOUR LEVEL-4,CONTACT
HEAT LEVEL-1, CONVECTIVE HEAT LEVEL-
3, RADIANT HEAT LEVEL-2,SPLASH OF
MOLTEN METAL LEVEL-4

GLOVES,PROTECTIVE,TYPE:
HAND,LENGTH: 10.5 INCH,TYPE:
FOR HOT CANADIAN,PALM SIDEFULL SLIT LEATHER
WORK AND BACK SIDE WITH DRILL CLOTH
SUPERIOR QUALITY,COMFORTABLE IN
WEARING

GLOVES,PROTECTIVE,TYPE:
HAND,EXTERNAL MATERIAL:
LEATHER,THICKNESS: 1-1.5
5 MM,LENGTH: 14 INCH,WITH INSIDE FELT
LINING,AND FITTED WITH FULL INSIDE
SUPERIOR QUALITY FLANNEL CLOTH
LINING,SUPERIOR QUALITY CHROME AND
SPLIT
LEATHER THICKNESS: 1.5 MM
 GLOVES,PROTECTIVE,TYPE:
HAND,EXTERNAL MATERIAL:
LEATHER,THICKNESS: 1-1.5
FOR HOT 5 MM,LENGTH: 14 INCH,WITH INSIDE FELT
METAL LINING,AND FITTED WITH FULL INSIDE
SUPERIOR QUALITY FLANNEL CLOTH
LINING,SUPERIOR QUALITY CHROME AND
SPLIT
LEATHER THICKNESS: 1.5 MM

JL5000

92-600/ GLOVES,PROTECTIVE,TYPE:
Nitrile HAND,SURGICAL,INTERNAL MATERIAL:
disposal LATEX,SIZE: 9
8304 INCH,MAX DISPOSABLE, EXAMINATION,
NON STERILE AMBIDEXTROUS LIGHT
POWDERED (USP GRADE)

92-600

VIBRAGAURD
07-112

VIBRASTOP
VIBRAGAURD
07-112
 Maintenance and
Technical Remarks
rejection criteria

OK

OK

1. When palm coating worn

out
2. When gloves torn

OK

OK

OK

1. When palm coating worn

out OK
2. When gloves torn

OK
 OK

OK

OK

OK

OK

1. On wear & tear

OK

OK
 OK

OK

OK

OK

1. When glove shows any

discolouration
2. When change in physical OK
properties
3. On Wear & Tear

OK

OK

OK

1. When glove shows any

discolouration
2. When change in physical
properties
3. On Wear & Tear
 1. When glove shows any
discolouration
2. When change in physical
properties
3. On Wear & Tear OK

OK

On wear & tear OK

On wear & tear OK

On wear & tear OK

On wear & tear OK

 1. On wear & tear OK

OK

1. On wear & tear OK

2. Replace after each
activity

OK

OK

OK
On wear & tear
On wear & tear

OK
 Hazard

Protection against chemicals

 Body protection against
hazardous chemicals and dust
 High visibility jacket

Protection Against Heat

Protection Against Heat &

Molten Metal
Protection Against Heat &
Molten Metal

Protection Against Molten

Metal
Protection Against Heat
 Approving and
Job Application
certifying

EN 14605 (Type 3
& 4),IS4501-1981

The lightest and most comfortable chemical protective garments available.

Featuring soft and flexible fabric, strong welded seams and an effective wide
ranging chemical barrier, it remains the preferred choice of industry for
chemical protection.
 The back open coat is extremely soft, lightweight for protection against
hazardous chemical splash.
 The back open coat is certified for Type 3, Type 4, Type 5 & Type 6 protection
to EN 14605, EN 13982-1 & 2 & EN 13034 respectively.
 The back open coat is made from triple layered fabric having good mechanical EN 14605 (Type 3
strength and higher chemical resistance & 4),IS4501-1981

EN 14605 (Type 3
& 4),IS4501-1981
Clothing suit,barrier man coverll white
CLOTHING Jaceket FLRSN FOR IDENTIFCATION OF PERSONS IS approved

ISO 11612: 2015

ISO
15025:2000,
Procedure A, Code
A1&Procedure B,
Code A2
7.3 :
Radiant Heat (Code
C) - as per ISO 6942
CLOTHING Leather COAT BAR MAN COVALL
7'.6 : Contact Heat
(Code F)-as per ISO
L2t27-t
7.5 : Molten iron
Splash (Code E) - as
per ISO 9185
7.6:Molten
aluminum splash
ISO 9185

ISO 11611 &

ISO 11612

Leather Clothing- Aprom, Arm Guard, Leg Guard

 Leather Clothing- Aprom, Arm Guard, Leg Guard

ISO 11611 &

ISO 11612

ISO 11612 and D3

certified

Fire Retardant Suit

ISO 11612 and D3

certified
 ISO 11612 and D3
certified

Aluminised Suit

ISO 11612 and D3

certified
Area Make Model photo

Joseph MICROGARD
Lesli/Ansell 3000

Smelter

Ansell Alphatec
3000

Smelter Lakeland Chemmax 2

Smelter Lakeland Chemmax 1

 Joseph MICROGARD
Lesli/Ansell 1800

Du Pont Tyvek

Smelter

Lakeland NS Cool Suit

Lakeland Safegard GP
Smelter
&Mine Reflectosafe

Smelter Weldohard

Smelter &
Weldohard
Mines
 PERF

Smelter &
Mines

MESSER

Smelter Weldohard/
Tarasafe

Smelter Lakeland
Smelter Joseph Leslie

Smelter Lakeland
 Maintenance and
Specification/Long text Technical Remarks
rejection criteria

OK

CLOTHING,SUIT,TYPE: PVC,ACID/ALKALI
PROOF,MATERIAL: HIGH POLYETHYLENE
Wash & keep dry after
FIIBER,SIZE: FREE,STANDARD: IS 4501:
each use Once
1981,EN-369,374/3 CE 0120,TYPE: damaged / punctured
LNCPC100 ABC NUMBER,WITH YELLOW
POLYMER COATING ON TOP

OK

CLOTHING,SUIT,TYPE: PVC,ACID/ALKALI
PROOF,MATERIAL: HIGH POLYETHYLENE Wash & keep dry after
FIIBER,SIZE: FREE,STANDARD: IS 4501:
each use Once OK
1981,EN-369,374/3 CE 0120,TYPE: damaged / punctured
LNCPC100 ABC NUMBER,WITH YELLOW
POLYMER COATING ON TOP

CLOTHING,SUIT,TYPE: PVC,ACID/ALKALI
PROOF,MATERIAL: HIGH POLYETHYLENE
Wash & keep dry after
FIIBER,SIZE: FREE,STANDARD: IS 4501:
each use Once OK
1981,EN-369,374/3 CE 0120,TYPE: damaged / punctured
LNCPC100 ABC NUMBER,WITH YELLOW
POLYMER COATING ON TOP
 OK

OK

CLOTHING,SUIT,TYPE: BARRIER MAN

COVERALL,MATERIAL: TYVEK,COLOR: OFF
WHITTE,FLAME RETARDENT,NON
Once
INFLAMMABLE,SUPERIER QUALITY
MATERIAL,COMFORTABLEIN damaged/punctured
WEARING,FREE IN SIZE IN ONE PIECE,MM:
1442A

OK

OK
CLOTHING,JACKET,TYPE: Once
FLUORESCENT,SIZE: FREE damaged/punctured OK

CLOTHING,COAT,TYPE: BARRIER MAN

COVERALL,MATERIAL:
LEATHER,COLOR:WHITE,SIZE: XTRA Once
OK
LARGE,FLAME RETARDENT, NON damaged/punctured
INFLAMMABLE, SUPERIERQUALITY
MATERIAL, COMFORTABLE IN WEARING

APRON,MATERIAL: LEATHER,SIZE: 24 X 48
Once
INCH,MADE FROM EXPORT QUALITY OK
LEATHER damaged/punctured

GUARD,SAFETY,TYPE: ARM
GUARD,OUTSIDE MATERIAL: LEATHER,
PATTERN: WOOLEN,SLEEVES WITH INSIDE
WOOLEN FLENT AND FLANNEL Once
LINING,EXPORT QUALITY: COMPLETE OK
damaged/punctured
PROTECTION OF ARM,MADE OF HEAVY
LEATHER (SAMPLE SHOULD BE
SUBMITTED
ALONGWITH THE OFFER)

GUARD,SAFETY,TYPE: LEG GUARD,INSIDE

MATERIAL: WOOLEN,OUTSIDE MATERIAL:
LEATHER,WITH INSIDE WOOLEN FLENT
AND FLANNELINING, EXPORT QUALITY- Once OK
MADE OF HEAVY LEATHER,COMPLETE damaged/punctured
PROTECTION OF FOOT AND LEG UP TO
KNEE JOINT.-SHOULD HAVE BELCROW FOR
TIGHTENING THE SAME IN LEG.
APRON,MATERIAL: LEATHER,SIZE: 24 X 48
Once
INCH,MADE FROM EXPORT QUALITY damaged/punctured OK
LEATHER

GUARD,SAFETY,TYPE: LEG GUARD,INSIDE

MATERIAL: WOOLEN,OUTSIDE MATERIAL:
LEATHER,WITH INSIDE WOOLEN FLENT
AND FLANNELINING, EXPORT QUALITY- Once
MADE OF HEAVY LEATHER,COMPLETE damaged/punctured OK
PROTECTION OF FOOT AND LEG UP TO
KNEE JOINT.-SHOULD HAVE BELCROW FOR
TIGHTENING THE SAME IN LEG.

CLOTHING,SUIT,TYPE: FLAME
PROOF,MATERIAL: COTTON,SAVIOUR
FLAME RETARDANT,SPECIFICATION: EN-
366/367,CE MARK,THREE PIECE SUIT Once OK
damaged/punctured
WITH CHINESE COLLAR,JACKET,PANT AND
HOOD ATTACHED WITH TWO FRONT
POCKETS AND CLOSING

CLOTHING,SUIT,TYPE: FLAME
PROOF,MATERIAL: COTTON,SAVIOUR
FLAME RETARDANT,SPECIFICATION: EN-
Once
366/367,CE MARK,THREE PIECE SUIT OK
damaged/punctured
WITH CHINESE COLLAR,JACKET,PANT AND
HOOD ATTACHED WITH TWO FRONT
POCKETS AND CLOSING
Two Layered Aluminized Heat Protective Once
Boiler Suit, Leslico damaged/punctured OK

Two Layered Aluminized Heat Protective Once

Boiler Suit, Leslico damaged/punctured OK
 Hazard Job Application Area

Smelter &
Mines

Smelter &
Mines

For protection against dust, &

welding fumes & Avian Smelter &
Influenza / SARS as Mines
NIOSH Approved IS 9473-2002
recommended by WHO approved N95 mask , IS 9473 - 2002

Smelter &
Mines
 Smelter &
Mines

CARTRIDGE,AMMONIA/ Smelter &

NIOSH Approved
METHYLAMINE,MM:6004 Mines

CARTRIDGE,FILTER,MM:7093 Smelter &

NIOSH Approved
P100 Mines

CARTRIDGE,ACID Smelter &

FUME,SO2,SO3 GAS,MM:6003 NIOSH Approved Mines

CARTRIDGE,MULTI Smelter &

NIOSH Approved
GAS,MM:60926 Mines
 Smelter &
Gas mask cartridge - Lead NIOSH Approved EN Approved
Mines

Gas mask cartridge - Acid Smelter &

NIOSH Approved EN Approved
Fumes, Cl2, So2/So3 Mines

Gas mask cartridge - Multi Smelter &

NIOSH Approved EN Approved
Gas/Vapour Mines

Gas mask cartridge - Multi Smelter &

Gas/Vapour NIOSH Approved EN Approved Mines

Gas mask catridge - Ammonia Catridge, ammonia/methylamine, MM 6004 Mines

&
Smelters
MASK,SAFETY,HALF,MM:TM Smelter &
NIOSH Approved
6200 Mines

RESPIRATOR,SAFETY,AIRLIN Smelter &

E,CLN PRES,100FT Mines

NIOSH
RESPIRATOR,SAFETY,HARDH approved mask, meets ANSI Z87.1 - 2003 Smelter &
AT HOOD requirements for lens Mines

Smelter &
For protection against vapour NIOSH Approved EN Approved
Mines
 Make Model photo

Joseph Lesli JL-240 V

Venus 410v

3M 9504 INV

RFH01(Grey)
KARAM RFH01(White
)
 RFH02(GREY
)
KARAM
RFH02(WHIT
E)

3M MM: 6004

MM:
3M
7093P100

3M MM: 6003

3M MM: 60926
GVS SPR582

GVS SPR582

GVS SPR582

GVS SPR582

GVS SRP492
 MM: TM
3M
6200

3M

SCOTT

3M PR315

GVS SPR581
 Specification/Long text Maintenance and
rejection criteria

RESPIRATOR,SAFETY,TYPE: DUST,HAVING EXHALE On Wear/Tear and

VALVE,TYPE: FOLD FLAT TYPE (FFOLDING),TO PROTECT
Depending on the
AGAINST RESPIRABLE DUST,OFFER MUST BE SUBMITTED
contaimination
WITHSAMPLE

MASK,SAFETY, TYPE:DUST, MATERIAL:TEXTILE,

COLOR:GREY OR YELLOW, MANUFACTURER
NAME:VENUS,REFERENCE NUMBER:V410-V FFP1,CLASS, On Wear/Tear and
FOLD FLAT TYPE: IS-9473:2002 AND DGMS APPROVED Depending on the
RESPIRATOR WITH ONE WAY EXHALATION VENT VALVE, contaimination
ALUMINIUM NOSE CLIP, STITCHED DOUBLE TEXTILE
ELASTIC BANDS WITH ADJUSTABLE BEADS

RESPIRATOR,SAFETY,TYPE: DUST,HAVING EXHALE On Wear/Tear and

VALVE,TYPE: FOLD FLAT TYPE (FFOLDING),TO PROTECT
AGAINST RESPIRABLE DUST,OFFER MUST BE SUBMITTED Depending on the
contaimination
WITHSAMPLE

MASK,SAFETY, TYPE:DUST, MATERIAL:TEXTILE,

COLOR:GREY OR YELLOW, MANUFACTURER
NAME:VENUS,REFERENCE NUMBER:V410-V FFP1,CLASS, On Wear/Tear and
FOLD FLAT TYPE: IS-9473:2002 AND DGMS APPROVED Depending on the
RESPIRATOR WITH ONE WAY EXHALATION VENT VALVE, contaimination
ALUMINIUM NOSE CLIP, STITCHED DOUBLE TEXTILE
ELASTIC BANDS WITH ADJUSTABLE BEADS
RESPIRATOR,SAFETY,TYPE: DUST,HAVING EXHALE On Wear/Tear and
VALVE,TYPE: FOLD FLAT TYPE (FFOLDING),TO PROTECT
Depending on the
AGAINST RESPIRABLE DUST,OFFER MUST BE SUBMITTED
contaimination
WITHSAMPLE

PART NAME: CARTRIDGE,PART MATERIAL:

AMMONIA/METHYLAMINE,MM: 6004,FOR On wear/tear or
6months whichever is
GASS(NH3),SUITABLE TO FIT IN 3M 6200 HALF MASK,FOR
earlier
RESPIRATOR

PART NAME: CARTRIDGE,FILTER,MM: 7093P100,FOR LEAD On wear/tear or

DUST AND LEAD,CADMIUMZINC METAL FUMES,SUITABLE 6months whichever is
TO FIT IN 3M 6200 HALF MASK,FOR RESPIRATOR earlier

PART NAME: CARTRIDGE,MM: 6003,ACID FUME,CL2,SO2,SO3 On wear/tear or

GAS,FOR RESPIRATOR,HHALF MASK,MAKE: 3M,MODEL 6months whichever is
NUMBER: 6200 earlier

On wear/tear or
CARTRIDGE- GAS MASK, MULTI GAS 6months whichever is
earlier
PART NAME: CARTRIDGE,FILTER,MM: 7093P100,FOR LEAD On wear/tear or
DUST AND LEAD,CADMIUMZINC METAL FUMES,SUITABLE 6months whichever is
TO FIT IN 3M 6200 HALF MASK,FOR RESPIRATOR earlier

PART NAME: CARTRIDGE,MM: 6003,ACID FUME,CL2,SO2,SO3 On wear/tear or

GAS,FOR RESPIRATOR,HHALF MASK,MAKE: 3M,MODEL 6months whichever is
NUMBER: 6200 earlier

On wear/tear or
CARTRIDGE- GAS MASK, MULTI GAS 6months whichever is
earlier

On wear/tear or
CARTRIDGE- GAS MASK, MULTI GAS WITH HEPA FILTER 6months whichever is
earlier

PART NAME: CARTRIDGE,PART MATERIAL: On wear/tear or

AMMONIA/METHYLAMINE,MM: 6004,FOR
6months whichever is
GASS(NH3),SUITABLE TO FIT IN 3M 6200 HALF MASK,FOR earlier
RESPIRATOR
RESPIRATOR,SAFETY,TYPE: DOUBLE CARTRIDGE,GAS
MASK,MATERIAL: POLYVINYL CHHLORIDE,FILTER TYPE:
On wear/tear or 1 year
VAPOUR,COMFORTABLE AND EASY TO USE,FACE PIECE
whichever is earlier
SHOULD BE REUSABLE,CARTRIDGE AND FILTER
REPLACEABLE,MM: 3M TM 6000-3M 6200

RESPIRATOR,SAFETY,TYPE: AIR LINE,CLEAN

PRESSURE,FILTER TYPE: PANEL,WITHHOOD, BREATHING
TUBE WITH ADAPTER, AIR REGULATOR, HOSE SIZE: 50 On wear/tear or
FEETWITH SACHRADER TWIST LOCK FITTINGS, AS PER 6months whichever is
STANDARD MATERIAL:IS-10245-1982 EN-136,THREE earlier
OUTLETS AND ROLLED ON A WHEEL / RETRACTABLESPOOL,
FOR FACE MASK, MAKE: SURE SAFETY

RESPIRATOR,SAFETY,TYPE: AIR LINE,CLEAN

PRESSURE,FILTER TYPE: PANEL,WITHHOOD, BREATHING
TUBE WITH ADAPTER, AIR REGULATOR, HOSE SIZE: 50 On wear/tear or
FEETWITH SACHRADER TWIST LOCK FITTINGS, AS PER 6months whichever is
STANDARD MATERIAL:IS-10245-1982 EN-136,THREE earlier
OUTLETS AND ROLLED ON A WHEEL / RETRACTABLESPOOL,
FOR FACE MASK, MAKE: SURE SAFETY

RESPIRATOR,SAFETY,WITH HARDHAT HOOD, FOR On wear/tear or

FACEMASK, WITH EASILY ADJUSTABLE SUSPENSION AND 6months whichever is
ADJUSTABLE AIRFLOW, MAKE: 3M earlier

RESPIRATOR,SAFETY,TYPE: DOUBLE CARTRIDGE,GAS

MASK,MATERIAL: POLYVINYL CHHLORIDE,FILTER TYPE:
VAPOUR,COMFORTABLE AND EASY TO USE,FACE PIECE
SHOULD BE REUSABLE,CARTRIDGE AND FILTER
REPLACEABLE,MM: 3M TM 6000-3M 6200
On wear/tear or 1 year
whichever is earlier
Technical Remarks

OK

OK

OK

OK
OK

OK

OK

OK

OK
OK

OK

OK

OK

OK
OK

OK

OK

OK

OK
 Approving and
Hazard Job Application Area
certifying

EN 166 , EN 167,
EN 168, EN 170 or
Face protection For Chemical ANSI APPROVED -
splash ,Heat and small Face Protection ANSI Z87.1 - Smelter
particals 2003 for high impact,
IS 8940 -1978

EN 166 , EN 167,
EN 168, EN 170 or
Face protection For Chemical ANSI APPROVED -
splash ,Heat and small Face Protection ANSI Z87.1 - Smelter
particals 2003 for high impact,
IS 8940 -1978

EN 166 , EN 167,
EN 168, EN 170 or
Face protection For Chemical ANSI APPROVED -
splash ,Heat and small Face Protection ANSI Z87.1 - Smelter
particals 2003 for high impact,
IS 8940 -1978

EN 166 , EN 167,
EN 168, EN 170 or
Face protection For Chemical ANSI APPROVED -
splash ,Heat and small Face Protection ANSI Z87.1 - Smelter
particals 2003 for high impact,
IS 8940 -1978

Face and Neck

Face Protection from Heat and ISO 11612: 2015 and
Protection Smelter
dust BALACLAVA D3 certified
 Face and Neck
Face Protection from Heat and ISO 11612: 2015 and
Protection Smelter
dust BALACLAVA D3 certified
 Make Model photo

Unicare UEE 107

Unicare UEE 107

Karam ES51

Karam ES51

Joseph Lesli/ Jemini

Tarasafe Klopman
Lakeland
 Maintenance and Technical
Specification/Long text
rejection criteria Remarks

SHIELD,SAFETY,TYPE: VISOR,SUITABLE TO
FIT IN ANY HELMET HAVING SLOT
FORFIXING THE SAME MADE FROM Cleaned after use with a
SUPERIOR QUALITY HEAT RESISTANT damp cloth and change OK
ACRYLIC VISOR. AS PER STANDARD IS 8521 When it is damaged
(PART-1): 1971 OR POLY CARBONATE
VISOR,ANSI Z87 CE MARK,HAVING SLOT FIX

SHIELD,SAFETY,TYPE: VISOR,SIZE: 12 X 9
INCH,COLOR: BLUE,ADJUSTABLE Cleaned after use with a
HEADBAND,IT SHOULD COVER UPTO EARS damp cloth and change OK
AND CHIN AND SHOULD NOT CAUSE When it is damaged
INCONVENIENCE FOR NECK MOVEMENT

SHIELD,SAFETY,TYPE: VISOR,SUITABLE TO
FIT IN ANY HELMET HAVING SLOT
FORFIXING THE SAME MADE FROM Cleaned after use with a
SUPERIOR QUALITY HEAT RESISTANT damp cloth and change OK
ACRYLIC VISOR. AS PER STANDARD IS 8521 When it is damaged
(PART-1): 1971 OR POLY CARBONATE
VISOR,ANSI Z87 CE MARK,HAVING SLOT FIX

SHIELD,SAFETY,TYPE: VISOR,SIZE: 12 X 9
INCH,COLOR: BLUE,ADJUSTABLE Cleaned after use with a
HEADBAND,IT SHOULD COVER UPTO EARS damp cloth and change OK
AND CHIN AND SHOULD NOT CAUSE When it is damaged
INCONVENIENCE FOR NECK MOVEMENT

MASK,SAFETY,TYPE:
BALACLAVA,MATERIAL: HEAVY DRILL
COTTON CLOTH SOFT,FORTAPERS
HOOD,COMFORTABLE IN WEARING,FOR
When it is damaged OK
OVER ALL COVER ON HEAD,FACE ANDNECK
WITH OPENING AT BOTH EYES AND
ATTACHED LACE FOR TIGHTENING AT
NECK
MASK,SAFETY,TYPE:
BALACLAVA,MATERIAL: HEAVY DRILL
COTTON CLOTH SOFT,FORTAPERS
HOOD,COMFORTABLE IN WEARING,FOR
When it is damaged OK
OVER ALL COVER ON HEAD,FACE ANDNECK
WITH OPENING AT BOTH EYES AND
ATTACHED LACE FOR TIGHTENING AT
NECK
 Hazard Description Job Application Area

Madatory PPE, Every one has

to wear it while getting enter
in the Plant/Mine Premises .
The Hard Hats are designed to
Strong head impacts and absorb some of the energy of an
injury penetration which can impact through partial Mines/
Safety helmet
be caused by falling of heavy destruction of component parts Smelter
objects. and, even though damage may
not be readily apparent, any
protective hard hat subject to
impact should be replaced.
 Make Model photo Specification/Long text

2001
Joseph Leslie Smelater
3001 Mines

HELMET,SAFETY,INDUSTRIA
L,MATERIAL: HIGH-DENSITY
POLYETHYLENE,CONNECTIO
N,,HEADBAND/CHINSTRAP:
ADJUSTABLE REXENE
HEADBANDS,COLOR:
Karam SHELTEK - WHITE,STANDARD:IS
PN542 2925/1984,HEAD BAND
MATERIAL:
NYLON,ADJUSTABLE
COTTON CHIN
STRAPS,ISIMARKED AND
DGMS APPROVED,WITH
LAMP BRACKET AND CABLE
CLIPS

Karam
PN 581
 Maintenance and Technical
rejection criteria Remarks

OK

As Per DGMS Guideline

should be reject after 3 OK
years

OK
 Hazard Job Application Area

Emergency PPE , Madatory For UG work

Self-rescuers to provide seccondary source for
breathing ,are intended for use in environments
such as underground Mine Metal Mine , Coal Mine
Mines/
Risk of Fire and Explosion where there is a risk of fire or explosion, and in a
Smelter
location where no external rescue may be
available for some time – the wearer must make
their own way to safety , this is required a sper
DGMS MMR 2019 Regulation no -213
 Make Model photo

Roshimzaschita SHS-30E

Dezega CI 30
 Maintenance and Technical
Specification/Long text
rejection criteria Remarks

OK

RESPIRATOR,SAFETY, TYPE:SELF
RESCUER,DEMO,
MANUFACTURERMODEL:CI-30,SERVICE As Per OEM Shelf Life is
LIFE: 10 YEARS, ESCAPE FROM 10 years or after Colour
DANGEROUS ENVIRONMENT:30 MINS, Change of Indicator
NOMINAL RATED DURATION AS PER
EN13794:2002

OK
 Hazard Job Application Area

Protection from fall during Mines/

Fall Protection while working at Height -Block
free fall with sudden jerk Smelter

It enables the worker to work

at heights in a well-supported Fall Protection while working at Height -Full Mines/
body Harness Smelter
position, with both hands free.
position, with both hands free. body Harness Smelter

It enables the worker to work

Mines/
at heights in a well-supported Fall Protection while working at Height -Belt
position, with both hands free. Smelter
 In the event of a fall the
special webbing inside the
Energy Absorber opens up.
Fall Protection while working at Height -rope Mines/
This opening of the webbing
lanyard Smelter
takes up most of the jerk
which is felt as an impact
when a fall occurs

To provide safe anchorage for

Fall Protection while working at Height - Mines/
horizontal movement while
Horozontal Anchorage Line Smelter
working at height.
To provide safe anchorage for
Fall Protection while working at Height - Mines/
horizontal movement while
working at height. Horozontal Anchorage Line Smelter
Make Model photo

Karam PCGS10SS

Model - SRL REBEL 33' SS

3M
Cable

Karam PN43+PN351
 3M™ DBI-SALA® ExoFit
NEX™ Lineman Arc Flash
3M
Harness with 2D Belt
1113682

Karam 56

3M™ DBI-SALA® Delta™

3M Crossover-Style Construction
Climbing Harness (1101812)

Karam 351
Karam 351

3M Protecta Twin Leg

3M lanyard

Karam PN22
 3M Protecta Full Body
3M
Harness
 Maintenance and
Specification/Long text Technical Remarks
rejection criteria

OK

PART NAME: BLOCK,FALL

ARRESTER,RETRACTABLE with 10 m
Rope ,PART NUMBER : After Each fall
PCGS306SS,WITHWIRE ROPE, CABLE Maintenance should be
OK
MATERIAL: STAINLESS STEEL, LENGTH: 6 done or as per Check it
MTRS, FORHORIZONTAL ANCHORAGE LINE can rejected also.
SYSTEM ON RIGID CABLE LINE, MAKE:
KARAM

OK

OK

BELT,SAFETY,TYPE: FULL BODY HARNESS

with shock absorber ,APPLICATION:
LINEMAN,FOR WORK ON POLLES,CONFIRM
After Each fall
TO EN 361,SIZE:
Inspection should be
MEDIUM/LARGE,ADJUSTABLE SHOULDER
AND THIGH STRAP,HOOK MODEL NUMBER: done or as if any OK
physical damage found
UEE-302 WITH TWIN LIFE LINES
(LANYARDS),2 CHESTATTACHMENT D- or observed it should be
rejected immediately.
RING AND DORSAL ATTACHMENT D-
RING,MM: UEE-284 To be used at above 6
m height work
 UEE-302 WITH TWIN LIFE LINES physical damage found
or observed it should be
(LANYARDS),2 CHESTATTACHMENT D-
rejected immediately.
RING AND DORSAL ATTACHMENT D-
RING,MM: UEE-284 To be used at above 6
m height work

OK

OK

OK
After Each fall
Inspection should be
BELT,SAFETY,TYPE: FULL BODY HARNESS done or as if any
without lanyard ,PART NUMBER : 56 physical damage found
or observed it should be
rejected immediately.

OK

OK
 OK
After Each fall
BELT,SAFETY,TYPE: ROPE LANYARD with Inspection should be
shock absorber only ,PART NUMBER : done or as if any
351To be used at above 6 m height work physical damage found
only or observed it should be
rejected immediately.

OK

OK

OK
After Each fall
BELT,SAFETY,TYPE: FULL BODY HARNESS Inspection should be
only ,PART NUMBER : PN22,FOR done or as if any
HORIZONTALANCHORAGE LINE SYSTEM physical damage found
ON RIGID CABLE LINE, MAKE: KARAM or observed it should be
rejected immediately.
 After Each fall
BELT,SAFETY,TYPE: FULL BODY HARNESS Inspection should be
only ,PART NUMBER : PN22,FOR done or as if any
HORIZONTALANCHORAGE LINE SYSTEM physical damage found
ON RIGID CABLE LINE, MAKE: KARAM or observed it should be
rejected immediately.

OK
 Hazard Job Application Area

Hearing Damage, temporary Industrial type hearing protection, to be used at Mines/

or permanent hearing loss,
high noise areas on in machineries - Ear Muff Smelter
permanent thresshold shift

Hearing Damage, temporary

or permanent hearing loss, Industrial type hearing protection, to be used at Mines/
high noise areas on in machineries - Ear Plug Smelter
permanent thresshold shift
 Make Model photo

3M 1426

KARAM EP21

3M PELTOR, X series

3M 1270

Honeywell SMF30
 Maintenance and
Specification/Long text Technical Remarks
rejection criteria

OK

EAR MUFF,SAFETY,TYPE: ROOMY AND

DURABLE,GENERAL PURPOSE
PADDED,FEATURES:: FOR RELIABLE
PROTECTION,FOR EVERY DAY USE,LIGHT OK
WEIGHT DESIGN AND FLEXIBLE Wear and tear, puncture
HEADBAND TO PROVIDE AN EASY FIT AND
COMFORT TO THE USE WITH ADJUSTABLE
EAR,REF: 1435

OK

OK
Soft Pliable <(>&<)> Reusable EAR PLUGS
confirming to EN352-2:2002Specification,
Pre-moulded for secure fit, having reversible
TripleFlanges for easy cleaning <(>&<)> an Wear and tear, poor
integral cord (neck string) topreventplug condition, poor fitting,
loss, supplied in plastic box, display packed dirty condition
in poly bag having CEMark and with
instructions for use.
OK
 Hazard Job Application Area

Arc Flash
Hood
Protection Against Electricity Working on electric panel/circuit
(40/ 100
Cal/Cm2)

Electrical
Protection Against Electricity Working on electric panel/circuit Safety Helmet
(Class E)

Balaclava
Protection Against Electricity Working on electric panel/circuit (8/ 11.8/ 20
Cal/Cm2)
 Dielectric
Protection Against Electricity Working on electric panel/circuit Over Safety
Shoe

Dielectric
Protection Against Electricity Working on electric panel/circuit
Gum boot

Electric Volts
handled &
Insulated
rubber gloves

Electrical shock Working on electric panel/circuit

Electric Volts
handled &
Insulated
rubber gloves

Electrical shock Working on electric panel/circuit Arc Flash Suit

Electrical shock Working on electric panel/circuit Arc Flash Suit
 Make Model photo

Smelter &
Salisbury (By Honeywell)
Mines

Smelter &
Salisbury (By Honeywell)
Mines

Smelter & KARAM

Mines

Salisbury (By Honeywell)

Smelter &
Mines

Lakeland
Smelter &
Lakeland
Mines

Smelter &
RESPIREX
Mines

Smelter &
Mines Honeywell

Smelter &
Mines Raychem RPG

Smelter & Salisbury/ Impact (By

Mines Honeywell)
Smelter &
Lakeland
Mines
 Maintenance and Technical
Specification/Long text
rejection criteria Remarks

Need basis or If any

As per Arc flash risk assessment OK
incident occurs

Need basis or If any

As per Arc flash risk assessment OK
incident occurs

As per Arc flash risk assessment Need basis or If any OK

incident occurs

Need basis or If any

As per Arc flash risk assessment OK
incident occurs

Need basis or If any

As per Arc flash risk assessment OK
incident occurs
 Need basis or If any
As per Arc flash risk assessment OK
incident occurs

Need basis or If any

As per Arc flash risk assessment OK
incident occurs

1. On Wear & Tear

2. On Validity expiry (As
per GESM standards,
validity for electrical
GLOVES,PRTVE,ARC FLASH,Salisbury,AFG40 gloves is only for 12 OK
months from date of
manufature or for 6
months from date of use
whichever is earlier)
1. On Wear & Tear
2. On Validity expiry (As
per GESM standards,
validity for electrical
GLOVES,PRTVE,ARC FLASH gloves is only for 12 OK
months from date of
manufature or for 6
months from date of use
whichever is earlier)

Need basis or If any

CLOTHING,SUIT,ARC FLASH,PANT OK
incident occurs
 Need basis or If any
CLOTHING,SUIT,ARC FLASH,PANT OK
incident occurs