Bid Number/बोली मांक ( बड सं या) :

GEM/2024/B/5201267
Dated/ दनांक : 24-07-2024

Bid Document/ बड द तावेज़

Bid Details/ बड ववरण

Bid End Date/Time/ बड बंद होने क तार ख/समय 03-08-2024 18:00:00

Bid Opening Date/Time/ बड खुलने क

03-08-2024 18:30:00
तार ख/समय

Bid Offer Validity (From End Date)/ बड पेशकश

30 (Days)
वैधता (बंद होने क तार ख से)

Ministry/State Name/मं ालय/रा य का नाम Gujarat

Department Name/ वभाग का नाम Panchayats And Rural Housing Department Gujarat

Organisation Name/संगठन का नाम Surat District Panchayat

Office Name/कायालय का नाम Taluka Panchayat Kamrej

Total Quantity/कुल मा ा 20

Sofa Set (Steel Tube) (Q3) , Sofas (V2) (Q3) , Executive

Item Category/मद केटे गर Table (V2) (Q3) , Plastic Moulded Chair as per IS 13713 (V2)
(Q3)

Minimum Average Annual Turnover of the

bidder (For 3 Years)/ बडर का यूनतम औसत 30 Lakh (s)
वा षक टनओवर (3 वष का)

MSE Exemption for Years of Experience and

No
Turnover/ अनुभव के वष से एमएसई छूट

Startup Exemption for Years of Experience

No
and Turnover/ अनुभव के वष से टाटअप छूट

Experience Criteria,Bidder Turnover,Certificate (Requested

in ATC),Additional Doc 1 (Requested in ATC),Additional Doc
Document required from seller/ व े ता से मांगे 2 (Requested in ATC)
*In case any bidder is seeking exemption from Experience /
गए द तावेज़ Turnover Criteria, the supporting documents to prove his
eligibility for exemption must be uploaded for evaluation by
the buyer

Bid to RA enabled/ बड से रवस नीलामी स य कया No

Type of Bid/ बड का कार Two Packet Bid

Primary product category Sofa Set (Steel Tube)

Time allowed for Technical Clarifications

during technical evaluation/तकनीक मू यांकन के 2 Days
दौरान तकनीक प ीकरण हे तु अनुमत समय

1 / 10
 Bid Details/ बड ववरण

Inspection Required (By Empanelled

Inspection Authority / Agencies pre- No
registered with GeM)

Evaluation Method/मू यांकन प ित Total value wise evaluation

EMD Detail/ईएमड ववरण

Required/आव यकता No

ePBG Detail/ईपीबीजी ववरण

Required/आव यकता No

Splitting/ वभाजन

Bid splitting not applied/बोली वभाजन लागू नह ं कया गया.

MII Purchase Preference/एमआईआई खर द वर यता

MII Purchase Preference/एमआईआई खर द वर यता Yes

MSE Purchase Preference/एमएसई खर द वर यता

MSE Purchase Preference/एमएसई खर द वर यता Yes

1. The minimum average annual financial turnover of the bidder during the last three years, ending on 31st
March of the previous financial year, should be as indicated above in the bid document. Documentary evidence in
the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant /
Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the
date of constitution / incorporation of the bidder is less than 3-year-old, the average turnover in respect of the
completed financial years after the date of constitution shall be taken into account for this criteria.
2. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier
as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its
subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum
local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the
Purchase preference, the bidder must upload a certificate from the OEM regarding the percentage of the local
content and the details of locations at which the local value addition is made along with their bid, failing which
no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore, the declaration relating
to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company
and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public
Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers
as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are
not eligible to participate. However, eligible micro and small enterprises will be allowed to participate .The
buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023.

2 / 10
OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy
for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017.

3. Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs as
defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued
by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned
Ministry. If the bidder wants to avail the Purchase preference, the bidder must be the manufacturer of the offered
product in case of bid for supply of goods. Traders are excluded from the purview of Public Procurement Policy for
Micro and Small Enterprises. In respect of bid for Services, the bidder must be the Service provider of the offered
Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the
offered product or service. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% of
margin of purchase preference /price band defined in relevant policy, such Seller shall be given opportunity to
match L-1 price and contract will be awarded for 25 % percentage of total quantity.The buyers are advised to
refer the OM No.F.1/4/2021-PPD dated 18.05.2023. OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of
Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012 and Public
Procurement (Preference to Make in India) Order, 2017.
4. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and
for determining the Eligibility Criteria related to Turn Over, Past Performance and Project / Past Experience etc.
This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any
impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of
quoted prices which would be determined by the buyer based on its own assessment of reasonableness and
based on competitive prices received in Bid / RA process.

Sofa Set (Steel Tube) ( 2 pieces )

(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

* As per GeM Category Specification/जेम केटे गर विश के अनुसार

Specification Name/ विश का Bid Requirement/ बड के िलए आव यक (Allowed

Specification
नाम Values)/अनुमत मू य

MATERIAL Material of backrest cover leather cloth / LEATHERITE

Material of frame for seat Moulded plywood of 12±1mm thickness

and Backrest

Material of Seat cover leather cloth / LEATHERITE

Material of Side Frame SS 202 Round pipeDiameter 25 Mm x 1.6 Mm Thick

Cover of Foam on armrest fabric

FINISH Finish powder coated

WARANTEE WARRANTY PERIOD IN 1, 2, 3, 4, 5 Or higher

NUMBER OF YEARS

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

3 / 10
 Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Patel Sumitraben 394185,Taluka Panchayat

1 2 30
Parbhubhai Kamrej , Ta.Kamrej , Dist Surat

Sofas (V2) ( 2 pieces )

(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

* As per GeM Category Specification/जेम केटे गर विश के अनुसार

Specification Name/ विश का Bid Requirement/ बड के िलए आव यक (Allowed

Specification
नाम Values)/अनुमत मू य

GENERIC Total Number of Seats in 4

the Sofa Set

Number of Single Seater 2

Units (Nos)

Number of Two Seater Units 1

(Nos)

Number of Three Seater No Three Seater Unit

Units (Nos)

Number of Four Seater No Four Seater Unit

Units (Nos)

Frame Covering Fully Upholstered

Sofa Set is Foldable to use No

as bed

Backrest Cushion Material Foam

Density of Cushion of 50
Backrest Material (Kg/Cubic
M)

Covering Material for Seat Fabric

and Backrest

MATERIAL Frame Structure Material 18 mm thick Teak Plywood

and size (±1 mm)

Seat Cushion Material Rubber

Density of Cushion of Seat 40

Material ±3 (Kg/Cubic M)

Type of Spring in the Base / Web suspension

Seating

DIMENSION Length of Single Seater 508

Units in mm (±5 mm)

4 / 10
 Specification Name/ विश का Bid Requirement/ बड के िलए आव यक (Allowed
Specification
नाम Values)/अनुमत मू य

Length of Two Seater Units 800

in mm (±10 mm)

Length of Three Seater N.A

Units in mm (±10 mm)

Length of Four Seater Units N.A

in mm (±10 mm)

Depth of Sofa Units in mm 550

(±10 mm)

Sofa Height (Without Back 450.0 (millimeter)

Cushion) ±5 (mm)

Sofa Height (With Back 650.0 (millimeter)

Cushion) ±5 mm

Seat Cushion Length ±5 740

(mm)

Seat Cushion Width ±5 520

(mm)

Seat Cushion Thickness ±3 90

(mm)

Backrest Cushion Length ±5 740

(mm)

Backrest Cushion Width ±5 508

(mm)

WARRANTY Warranty 1 - Year

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Patel Sumitraben 394185,Taluka Panchayat

1 2 30
Parbhubhai Kamrej , Ta.Kamrej , Dist Surat

Executive Table (V2) ( 8 pieces )

(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

5 / 10
* As per GeM Category Specification/जेम केटे गर विश के अनुसार

Specification Name/ विश का Bid Requirement/ बड के िलए आव यक (Allowed

Specification
नाम Values)/अनुमत मू य

GENERIC Structure /Frame of table Two legs with modesty panel

The type of Storage One side pedestal unit

provided

Keyboard tray Not provided

Footrest Not Provided

MATERIAL Tabletop Material Teak wood

Thickness of table top 25 mm

material (± 1 mm)

Gable end material Prelaminated particles board(wood product) of grade

II type III of IS 12823/Latest

The thickness of the gable 25 mm

end

Modesty panel material Teak wood

The thickness of the 25 mm

modesty panel material

Leg Material NA

The thickness of the Leg NA

material

DIMENSION Width of tabletop ±10 mm 1200 mm

Depth of table ±10 mm 620 mm

Height of table ±10 mm 750 mm

Size (L x W) /diameter of NA
leg material ± 5 mm

EXTENDED RETURN ERU unit consists of No ERU

UNIT

PEDESTAL UNIT Total Number of drawers Three drawers

/storage in Pedestal units

COLOUR AND FINISH Table top finish Paint

Tabletop shade Dark walnut

Table /ERU /Pedestal Panel CP Teak Wood Lipping

Plain Side

WARRANTY Warranty period 1 Year

CERTIFICATION Test reports to be furnished No

to the buyer on demand

6 / 10
Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Patel Sumitraben 394185,Taluka Panchayat

1 8 30
Parbhubhai Kamrej , Ta.Kamrej , Dist Surat

Plastic Moulded Chair As Per IS 13713 (V2) ( 8 pieces )

(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

* As per GeM Category Specification/जेम केटे गर विश के अनुसार

Specification Name/ विश का Bid Requirement/ बड के िलए आव यक (Allowed

Specification
नाम Values)/अनुमत मू य

Generic Type of Chair Single Piece Plastic Moulded

Seat Cushion With

Back Cushion With

Plastic Material ABS Plastic (Acrylonitrile Butadiene Styrene)

Arms With Arms

Dimension and Seat Width in mm (+/- 5 455

Weight mm)

Seat Depth in mm (+/- 5 420

mm)

Thickness of Polyurethane 45
Foam Used in Seat in mm
(+/- 2 mm)

Density of PU Foam in KG 55
per Cum

GSM/Thickness of Fabric 230 gsm

(Gram per Sq Meter)

Thickness of Polyurethane 60
Foam Used in Backrest in
mm (+/- 2 mm)

Support / Under Support/Under Structure Single Moulded Piece No Support Structure

Structure
Support Structure Finishing Sigle Moulded Piece No Support Structure

Warranty Period Warranty Period in Number 1

of Years

7 / 10
Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

Patel Sumitraben 394185,Taluka Panchayat

1 8 30
Parbhubhai Kamrej , Ta.Kamrej , Dist Surat

Buyer Added Bid Specific Terms and Conditions/ े ता ारा जोड़ गई बड क वशेष शत

1. Generic

OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up
to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to
increase the ordered quantity by up to 25% of the contracted quantity during the currency of the
contract at the contracted rates. Bidders are bound to accept the orders accordingly.

2. Generic

Bidder financial standing: The bidder should not be under liquidation, court receivership or similar
proceedings, should not be bankrupt. Bidder to upload undertaking to this effect with bid.

3. Turnover

Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last
three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the
relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the
bidder is less than 3 year old, the average turnover in respect of the completed financial years after the
date of constitution shall be taken into account for this criteria.

4. Service & Support

Dedicated /toll Free Telephone No. for Service Support : BIDDER/OEM must have Dedicated/toll Free
Telephone No. for Service Support.

5. Service & Support

Escalation Matrix For Service Support : Bidder/OEM must provide Escalation Matrix of Telephone Numbers
for Service Support.

6. Buyer Added Bid Specific ATC

Buyer Added text based ATC clauses

8 / 10
 1. Copy of GST Certificate
2.. Copy of Pan Certificate
3. Copy of Cancel Cheque
4. Copy of EFT mandate duly by bank
This bid is only reserved for Local Bidder (Geographical Presence : Gujarat )

7. Buyer Added Bid Specific ATC

Buyer uploaded ATC document Click here to view the file .

Disclaimer/अ वीकरण

The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization, whereby Buyer organization is solely responsible for the impact of these clauses
on the bidding process, its outcome, and consequences thereof including any eccentricity / restriction arising in
the bidding process due to these ATCs and due to modification of technical specifications and / or terms and
conditions governing the bid. If any clause(s) is / are incorporated by the Buyer regarding following, the bid and
resultant contracts shall be treated as null and void and such bids may be cancelled by GeM at any stage of
bidding process without any notice:-

1. Definition of Class I and Class II suppliers in the bid not in line with the extant Order / Office Memorandum
issued by DPIIT in this regard.
2. Seeking EMD submission from bidder(s), including via Additional Terms & Conditions, in contravention to
exemption provided to such sellers under GeM GTC.
3. Publishing Custom / BOQ bids for items for which regular GeM categories are available without any
Category item bunched with it.
4. Creating BoQ bid for single item.
5. Mentioning specific Brand or Make or Model or Manufacturer or Dealer name.
6. Mandating submission of documents in physical form as a pre-requisite to qualify bidders.
7. Floating / creation of work contracts as Custom Bids in Services.
8. Seeking sample with bid or approval of samples during bid evaluation process. (However, in bids for
attached categories, trials are allowed as per approved procurement policy of the buyer nodal Ministries)
9. Mandating foreign / international certifications even in case of existence of Indian Standards without
specifying equivalent Indian Certification / standards.
10. Seeking experience from specific organization / department / institute only or from foreign / export
experience.
11. Creating bid for items from irrelevant categories.
12. Incorporating any clause against the MSME policy and Preference to Make in India Policy.
13. Reference of conditions published on any external site or reference to external documents/clauses.
14. Asking for any Tender fee / Bid Participation fee / Auction fee in case of Bids / Forward Auction, as the
case may be.

Further, if any seller has any objection/grievance against these additional clauses or otherwise on any aspect of
this bid, they can raise their representation against the same by using the Representation window provided in
the bid details field in Seller dashboard after logging in as a seller within 4 days of bid publication on GeM. Buyer
is duty bound to reply to all such representations and would not be allowed to open bids if he fails to reply to
such representations.

This Bid is also governed by the General Terms and Conditions/ यह बड सामा य शत के अंतगत भी शािसत है

In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action

in accordance with the laws./ जेम क सामा य शत के खंड 26 के संदभ म भारत के साथ भूिम सीमा साझा करने वाले दे श के बडर से खर द

9 / 10
पर ितबंध के संबंध म भारत के साथ भूिम सीमा साझा करने वाले दे श का कोई भी बडर इस िन वदा म बड दे ने के िलए तभी पा होगा
जब वह बड दे ने वाला स म ािधकार के पास पंजीकृ त हो। बड म भाग लेते समय बडर को इसका अनुपालन करना होगा और कोई भी
गलत घोषणा कए जाने व इसका अनुपालन न करने पर अनुबंध को त काल समा करने और कानून के अनुसार आगे क कानूनी कारवाई
का आधार होगा।

---Thank You/ ध यवाद---

10 / 10