NORME - 2017

ISO
ISO 14271:2017
Resistance welding -- Vickers hardness testing (low-force and microhardness) of resistance spot,
projection, and seam welds

ISO 19675:2017
Non-destructive testing -- Ultrasonic testing -- Specification for a calibration block for phased array
testing (PAUT)

ISO/TS 20273:2017
Guidelines on weld quality in relationship to fatigue strength

ISO 13918:2017
Welding -- Studs and ceramic ferrules for arc stud welding

ISO 16338:2017
Welding for aerospace applications -- Resistance spot and seam welding

ISO 19828:2017
Welding for aerospace applications -- Visual inspection of welds

ISO 17633:2017
Welding consumables -- Tubular cored electrodes and rods for gas shielded and non-gas shielded
metal arc welding of stainless and heat-resisting steels – Classification

ISO 20378:2017
Welding consumables -- Rods for gas welding of non-alloy and creep-resisting steels – Classification

ISO 26304:2017
Welding consumables -- Solid wire electrodes, tubular cored electrodes and electrode-flux
combinations for submerged arc welding of high strength steels – Classification

ISO 9017:2017
Destructive tests on welds in metallic materials -- Fracture test

ISO 14114:2017
Gas welding equipment -- Acetylene manifold systems for welding, cutting and allied processes --
General requirements

ISO 15296:2017
Gas welding equipment – Vocabulary

ISO 15011-4:2017
Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases
-- Part 4: Fume data sheets

1
ISO 16809:2017
Non-destructive testing -- Ultrasonic thickness measurement

ISO/TS 16829:2017
Non-destructive testing -- Automated ultrasonic testing -- Selection and application of systems

ISO 20669:2017
Non-destructive testing -- Pulsed eddy current testing of ferromagnetic metallic components

ISO 15708-1:2017
Non-destructive testing -- Radiation methods for computed tomography -- Part 1: Terminology

ISO 15708-2:2017
Non-destructive testing -- Radiation methods for computed tomography -- Part 2: Principles,
equipment and samples

ISO 15708-3:2017
Non-destructive testing -- Radiation methods for computed tomography -- Part 3: Operation and
interpretation

ISO 15708-4:2017
Non-destructive testing -- Radiation methods for computed tomography -- Part 3: Operation and
interpretation

ISO 20485:2017
Non-destructive testing -- Leak testing -- Tracer gas method

ISO 20486:2017
Non-destructive testing -- Leak testing -- Calibration of reference leaks for gases

ISO 10880:2017
Non-destructive testing -- Infrared thermographic testing -- General principles

ISO 18251-1:2017
Non-destructive testing -- Infrared thermography -- Part 1: Characteristics of system and equipment

CEN
EN 13479:2017
Welding consumables - General product standard for filler metals and fluxes for fusion welding of
metallic materials

EN ISO 9606-1:2017
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor
1:2012 and Cor 2:2013)

EN 14730-1:2017
Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes

2
CEN/TR 17108:2017
Non-destructive testing - Lighting in penetrant and magnetic particle testing, good practice

CEN/TS 17100:2017
Non-destructive testing - Penetrant testing - Reference photographs and sizing of indications

EN 1330-9:2017
Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing

CEN/ISO
CEN ISO/TR 15608:2017
Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)

EN ISO 10675-2:2017
Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and
its alloys (ISO 10675-2:2017)

EN ISO 13916:2017
Welding - Measurement of preheating temperature, interpass temperature and preheat
maintenance temperature (ISO 13916:2017)

EN ISO 14271:2017
Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot,
projection, and seam welds (ISO 14271:2017)

EN ISO 14343:2017
Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless
and heat resisting steels - Classification (ISO 14343:2017)

EN ISO 14555:2017
Welding - Arc stud welding of metallic materials (ISO 14555:2017)

EN ISO 15614-1:2017
Specification and qualification of welding procedures for metallic materials - Welding procedure test
- Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017)

EN ISO 17640:2017
Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO
17640:2017)

EN ISO 18276:2017
Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc
welding of high strength steels - Classification (ISO 18276:2017)

EN ISO 18278-3:2017
Resistance welding - Weldability - Part 3: Evaluation procedures for weldability in spot weld bonding
(ISO 18278-3:2017)

3
EN ISO 19285:2017
Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels (ISO
19285:2017)
EN ISO 22825:2017
Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-
based alloys (ISO 22825:2017)

EN ISO 22829:2017
Resistance welding equipment - Transformers - Integrated transformer-rectifier units for welding
guns operating at 1 000 Hz (ISO 22829:2017)

EN ISO 23279:2017
Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO
23279:2017)

EN ISO 3580:2017
Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels -
Classification (ISO 3580:2017)

EN ISO 5175-1:2017
Gas welding equipment - Safety devices - Part 1: Devices incorporating a flame (flashback) arrestor
(ISO 5175-1:2017)

EN ISO 5175-2:2017
Gas welding equipment - Safety devices - Part 2: Not incorporating a flame (flashback) arrestor (ISO
5175-2:2017)

EN ISO 544:2017
Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product,
dimensions, tolerances and markings (ISO 544:2017)

EN ISO 636:2017
Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-
grain steels - Classification (ISO 636:2017)

EN ISO 9013:2017
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality
tolerances (ISO 9013:2017)

EN ISO 9455-11:2017
Soft soldering fluxes - Test methods - Part 11: Solubility of flux residues (ISO 9455-11:2017)

EN ISO 9455-13:2017
Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:2017)

EN ISO 9455-14:2017
Soft soldering fluxes - Test methods - Part 14: Assessment of tackiness of flux residues (ISO 9455-
14:2017)

4
EN ISO 9455-15:2017
Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:2017)

EN ISO 5577:2017
Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017)

EN ISO 16946:2017
Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO
16946:2017)

EN ISO 18563-2:2017
Non-destructive testing - Characterization and verification of ultrasonic phased array equipment -
Part 2: Probes (ISO 18563-2:2017)

EN ISO 20339:2017
Non-destructive testing - Equipment for eddy current examination - Array probe characteristics and
verification (ISO 20339:2017)

EN ISO 16371-2:2017
Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates -
Part 2: General principles for testing of metallic materials using X-rays and gamma rays (ISO 16371-
2:2017)

EN ISO 20484:2017
Non-destructive testing - Leak testing - Vocabulary (ISO 20484:2017)

IEC
IEC 60974-1:2017
Arc welding equipment - Part 1: Welding power source

IEC 62822-3:2017
Electric welding equipment - Assessment of restrictions related to human exposure to
electromagnetic fields (0 Hz to 300 Hz) - Part 3: Resistance welding equipment

AD 2000
B 8:2017
Flanges

G 2:2017
List of all standards quoted in the AD 2000 Code

HP 0:2017
General principles of design, manufacture and associated tests

HP 2/1:2017
Procedure testing for joining processes - Procedure testing for welded joints

HP 100 R:2017
Construction regulations - Metal piping

5
HP 801 Nr. 14:2017
Special pressure vessels - Pressure vessels in refrigerating and heat-pumping plant

HP 801 Nr. 26:2017

Special pressure vessels - Pressure for gases or gas mixtures with operating temperatures below -
10 °C

HP 801 Nr. 27:2017

Special pressure vessels - Pressure vessels for gases and gas mixtures in the liquid state

HP 801 Nr. 29:2017

Special pressure vessels - Rotating steam-heated cylinders

HP 801 Nr. 30:2017

Special pressure vessels - Autoclaves for masonry blocks

HP 801 Nr. 39:2017

Special pressure vessels - Pressure vessels in isostatic presses

W 9:2017
Steel flanges

Z 1:2017
Guidelines for meeting the essential safety requirements of the Pressure Equipment Directive when
using AD 2000-Merkblätter on pressure vessels, piping and fittings

Z 2:2017
Guidelines for carrying out a systematic analysis of hazards and risks

AWS
A5.9/A5.9M:2017 (ISO 14343:2009 MOD)
Welding Consumables—Wire Electrodes, Strip Electrodes, Wires, and Rods for Arc Welding of
Stainless and Heat Resisting Steels--Classification

A5.10/A5.10M:2017 (ISO 18273:2004 MOD)

Welding Consumables—Wire Electrodes, Wires and Rods for Welding of Aluminum and Aluminum-
Alloys—Classification

A5.18/A5.18M:2017
Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding

C1.4M/C1.4:2017
Specification for Resistance Welding of Carbon and Low-Alloy Steels

C2.16/C2.16M:2017
Guide for Thermal Spray Operator Qualification Programs

C4.2/C4.2M:2017
Recommended Practices for Oxyfuel Gas Cutting Torch Operation

6
C7.4/C7.4M:2017
Process Specification and Operator Qualification for Laser Beam Welding

C7.6/C7.6M:2017
Process Specification and Operator Qualification for Laser Hybrid Welding

C3.12M/C3.12:2017
Specification for Furnace Soldering

D1.6/D1.6M:2017
Structural Welding Code— Stainless Steel

D3.6M:2017
Underwater Welding Code

D8.2M:2017
Specification for Automotive Weld Quality – Resistance Spot Welding of Aluminum

D8.14M:2017
Specification for Automotive Weld Quality — Arc Welding of Aluminum

D16.3M/D16.3:2017
Risk Assessment Guide for Robotic Arc Welding

D17.1/D17.1M:2017
Specification for Fusion Welding for Aerospace Applications

F1.6:2017
Guide for Estimating Welding Emissions for EPA and Ventilation Permit Reporting

F4.1:2017
Safe Practices for the Preparation of Containers and Piping for Welding, Cutting, and Allied
Processes