Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Bca 2023 Sor

Download as pdf or txt
Download as pdf or txt
You are on page 1of 26

Unit Rates

The unit rates provided herewith were compiled from inputs obtained from a few leading quantity
surveying firms in Singapore. In view of the data limitations, the unit rates should be regarded as
reference only and are not suitable to be adopted for managing contract variations and contracts
involving Schedule of Rates. BCA makes no representation, expressed or implied, with regard to
the accuracy of the information herein and cannot accept any responsibility or liability for any
errors or omissions that may be made.

The unit rates include allowances for contractor’s overheads and profit and all necessary labour,
goods and materials, and plant & equipment costs unless stated otherwise.

Index

1 Excavation
2 Concrete Work
3 Brickwork and Blockwork
4 Roofing
5 Carpentry and Joinery
6 Structural Steelwork
7 Metal Work
8 Wall Finishes
9 Ceiling Finishes
10 Floor Finishes
11 Glazing
12 Painting
Unit Rates
Last Updated on 18 November 2022
[The data will be updated on a quarterly basis]

ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3


MEAN MEAN MEAN

I EXCAVATION
1 SITE CLEARANCE

1.1 Clear Site Vegetation

Clearing shrubs, bushes, undergrowth, grass, rubbish and


small trees not exceeding 600mm girth at a height of
1.00m above ground and grubbing up roots and disposal
of materials off site
A generally m2 9.50 9.80 9.80

2 GENERAL EXCAVATION

2.1 Oversite Excavation

Excavate over site, commencing from ground level, to


reduce level
A average 100mm deep m2 4.00 4.30 4.40
B average 200mm deep m2 5.10 5.40 5.60
C average 300mm deep m2 6.50 6.80 7.00
D exceed average 300mm deep m3 19.30 20.60 21.30

2.2 Pit/Trench Excavation

Excavate to form pit or trench, commencing from reduced


level
A ne 2.00m deep m3 36.40 37.60 37.60
B 2.00 - 4.00m deep m3 39.50 40.80 40.80
C 4.00 - 6.00m deep m3 42.30 43.70 43.70
D extra over for each 2.00m deep m3 5.60 5.80 5.80

2.3 Basement Excavation

Excavate to form basement, commencing from reduced


level
A ne 2.00m deep m3 30.90 32.00 32.00
B 2.00 - 4.00m deep m3 33.40 34.50 34.50
C 4.00 - 6.00m deep m3 36.20 37.40 37.40
D extra over for each 2.00m deep m3 3.30 3.40 3.40

2.4 Break Up Obstruction

Extra over excavation for breaking up obstruction below


ground level using mechanical means
A rock m3 154.80 160.70 160.70

3 FILLING

3.1 Backfilling

Backfill around trench, column base, pile cap, foundation,


beam and pier hole
A excavated material obtained within the site m3 10.70 11.30 11.30
B earthfilling obtained from contractor's own source m3 12.50 13.10 13.10

Page 2/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN

3.2 Filling and Forming Embankments

Deposit, spread, level, compact and consolidate in layers


of 150mm thick to make up levels
A excavated material obtained within the site m3 11.40 11.90 11.90
B earthfilling obtained from contractor's own source m3 14.60 15.40 15.40

3.3 Hardcore and Aggregate

Spread, level, compact, ram and consolidate


A hardcore, including blinding with sand m3 60.00 62.50 62.50

4 DISPOSAL

4.1 Excavated Material

Remove excavated material off site


A to contractor's own dumping site m3 33.70 34.30 36.30

II CONCRETE WORK
1 IN-SITU CONCRETE

1.1 Lean/Mass Concrete

Lean or Mass concrete binding to any location


A grade 15 m3 257.00 261.10 261.10
B grade 20 m3 265.40 269.70 269.70

1.2 Reinforced Concrete

Reinforced concrete to any location


A grade 25 m3 151.30 157.20 157.20
B grade 30 m3 153.30 158.60 159.00
C grade 35 m3 157.10 162.60 163.00
D grade 40 m3 162.50 168.10 168.60
E grade 50 m3 169.20 175.00 175.40
F Extra over for waterproofing additive m3 50.70 52.30 52.30

1.3 Green Concrete

Eco Green Concrete to any location


A 30 Eco Green Conc m3 158.10 164.10 164.10
B 35 Eco Green Conc m3 161.20 167.50 167.50
C 40 Eco Green Conc m3 164.50 170.80 170.80

2 REINFORCEMENT

2.1 Bar reinforcement

Mild steel bar reinforcement to any location


A 6 to 20mm diameter kg 1.90 1.90 1.90

High tensile steel bar reinforcement; to structure in any


location
B 10 to 13mm diameter kg 1.80 1.90 1.80
C 16 to 32mm diameter kg 1.80 1.90 1.80
D 40 to 50mm diameter kg 1.80 1.90 1.80

2.2 Fabric Reinforcement

Page 3/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN

Welded fabric reinforcement; well lapped (measured net)


A Reference No A7 - 3.02kg/m2 m2 11.70 12.00 11.90
B Reference No A8 - 3.95kg/m2 m2 13.20 13.50 13.50
C Reference No A9 - 4.99kg/m2 m2 15.60 16.00 15.90
D Reference No A10 - 6.16kg/m2 m2 17.00 17.40 17.30
E Reference No A13 - 10.42kg/m2 m2 26.20 27.00 26.90
F Reference No B10 - 8.14kg/m2 m2 21.90 22.50 22.40
G Reference No B13 - 13.50kg/m2 m2 32.70 33.40 33.40
H Reference No D10 - 12.32kg/m2 m2 32.20 33.20 33.20
I Reference No D13 - 20.84kg/m2 m2 50.80 52.10 52.10

3 FORMWORK

3.1 Timber Formwork

Timber formwork to in-situ concrete including strutting ne


3.50m high
A flat surface of suspended slab m2 52.20 53.30 53.80
B vertical surface of pilecap, ground beam, etc. m2 52.20 53.30 53.80
C vertical surface of column, walls m2 52.20 53.30 53.80
D vertical curved surface of column, wall m2 61.00 62.30 62.80
E sides and soffits of beams m2 53.20 54.30 54.80
F slopping surfaces to soffit of slabs and staircases m2 55.50 56.80 57.30
G vertical edge for each 100mm high m 9.20 9.90 9.90

Extra over formwork for strutting exceeding 3.50m


H each 1.50m high m2 3.80 3.80 3.80

3.2 Metal Formwork

Metal formwork to in-situ concrete with strutting not


exceeding 3.50m high
A vertical surface m2 58.70 61.90 62.80
B vertical curved surface m2 65.10 68.70 69.60
C horizontal surface m2 59.40 62.60 63.60
D left in formwork to soffits of suspended slab m2 87.20 89.90 91.60

Extra over formwork for strutting exceeding 3.50m high


E every successive 1.50m high m2 6.50 6.50 6.50

4 PRECAST CONCRETE COMPONENTS

4.1 Precast Concrete Components

Precast concrete components complete with steel


reinforcement, the whole hoisted, fixed and casted in
place including all labour and materials, formwork,
accessories and jointing
A column m3 1,332.40 1,367.30 1,367.30
B beam m3 1,163.40 1,202.70 1,221.30
C 100mm thick partition wall m2 105.50 109.00 110.40
D 100mm thick light weight partition wall m2 62.00 64.10 66.60

5 EXPANSION JOINTS

5.1 Joint Fillers

Compressible non-extruding bitumen impregnated


fibreboard to joint, including all necessary formwork
A 10mm thick m2 26.50 27.30 28.10

Page 4/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN
B 12mm thick m2 32.00 32.90 34.00
C 25mm thick m2 45.30 46.60 48.10

5.2 Joint Sealant

Polyurethane / polysulphide sealer squeezed into joint


A 25 x 15mm joint m 18.30 18.30 18.30
B 25 x 25mm joint m 23.20 23.20 23.20

5.3 Prestressing Cables

Tendons to prestressed concrete complete with all


necessary fixing accessories and grouts
A 12.9mm tendon kg 6.10 6.20 6.90

6 WATERPROOFING

6.1 Damp Proof Membrane

Waterproofing sheet laid to top,side or underside of


concrete structure
A 0.6mm thick polyethylene moisture barrier m2 6.70 6.70 6.70
B 0.8mm thick polyethylene moisture barrier m2 10.00 10.00 10.00
C approved bituminous m2 28.00 28.00 28.00

6.2 Waterproofing System to Ground Slab / Basement

Bituminous waterproof membrane


A to vertical surfaces m2 26.50 26.50 26.30
B to horizontal surfaces m2 26.50 26.50 26.30

Homogeneous thermoplastic waterproof membrane


C to vertical surfaces m2 29.50 29.50 31.30
D to horizontal surfaces m2 29.50 29.50 31.30

Polyurethane waterproof membrane


E to vertical surfaces m2 29.30 29.30 31.50
F to horizontal surfaces m2 29.30 29.30 31.50

6.3 Waterproofing System to Interior/Exterior Wet Areas

Cementitious waterproof coating


A to vertical surfaces m2 19.70 19.70 20.20
B to horizontal surfaces m2 19.70 19.70 20.20

Homogeneous thermoplastic waterproof membrane


C to vertical surfaces m2 32.10 32.10 32.10
D to horizontal surfaces m2 31.80 31.80 32.10

Acrylic waterproof membrane


E to vertical surfaces m2 24.10 24.10 24.70
F to horizontal surfaces m2 24.10 24.10 24.70

6.4 Waterproofing System to Water-retaining Structure

Cementitious waterproof coating


A to vertical surfaces m2 20.00 20.00 20.50
B to horizontal surfaces m2 20.00 20.00 20.50

Polyurethane elastomeric waterproof membrane

Page 5/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN
C to vertical surfaces m2 27.00 27.00 28.90
D to horizontal surfaces m2 27.00 27.00 28.90

7 INTEGRATED FINISH

Power floated finish to concrete slab


A generally m2 4.90 5.00 5.00
B with non-metallic hardener; generally m2 15.60 15.90 16.00

III BRICKWORK AND BLOCKWORK


1 CLAY BRICKS

1.1 Common Brickwork

Common clay brick laid in cement mortar (1:4) with


approved plasticiser and mesh reinforcement at every
fourth course;
A 102.5mm thick m2 38.90 40.60 41.70
B 215mm thick m2 77.20 80.10 82.30

1.2 Facing Brickwork

First quality facing brick laid in cement mortar (1:4) with


approved plasticiser and mesh reinforcement at every
fourth course;
A 102.5mm thick m2 51.60 54.00 57.40
B 215mm thick m2 102.30 106.40 108.70

2 CONCRETE BLOCKS

2.1 Hollow Concrete Blockwork

Hollow concrete block laid in cement mortar (1:4) with


approved plasticiser and mesh reinforcement at every
fourth course;
A 90mm thick m2 31.90 33.20 34.00
B 190mm thick m2 64.80 67.10 68.90

2.2 Autoclaved Aerated Concrete Blockwork

Autoclaved aerated concrete block laid in cement mortar


(1:4) with approved plasticiser and mesh reinforcement at
every fourth course;
A 100mm thick m2 42.60 44.30 44.20
B 200mm thick m2 68.70 72.10 72.00

3 GLASS BLOCKS

3.1 Glass Blockwork

Glass block laid in cement mortar (1:4) with approved


plasticiser and mesh reinforcement at every fourth course;

A 80mm thick m2 315.20 315.60 320.90

IV ROOFING
1 TILE ROOFING

1.1 Clay Roof Tiles

Page 6/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN

Standard colour interlocking clay roof tiles laid to slope not


exceeding 30º (measured nett with no allowance for laps);
fixed to battens (measured separately) according to
manufacturer's specifications and recommendations
A generally m2 63.30 63.30 65.30
B ridge or hip tiles m 45.10 45.10 46.50

1.2 Concrete Roof Tiles

Standard colour interlocking concrete roofing tile laid to


slope not exceeding 30º (measured nett with no allowance
for laps); fixed to battens (measured separately) according
to manufacturer's specifications and recommendations

A generally m2 24.60 24.60 25.50


B ridge tile m 14.70 14.70 15.20

2 BUILT-UP ROOFING

2.1 Insitu Finishes

Cement and sand (1:3) screed with waterproofing additive;


finished with steel trowel to receive waterproofing
membrane (measured separately)
A 25mm (average) thick; finished to falls m2 20.10 20.40 22.30
B 50mm (average) thick; finished to falls m2 30.80 31.40 32.00
C add or deduct for each 10mm thickness m2 5.40 5.40 5.50

Cement and sand (1:3) screed finished with steel trowel to


receive waterproofing membrane (measured separately)

D 25mm (average) thick; finished to falls m2 20.40 20.80 20.80


E 50mm (average) thick; finished to falls m2 23.60 24.10 24.10
F add or deduct for each 10mm (average) thickness m2 4.60 4.60 4.60

2.2 Waterproofing Membranes

Preparing surfaces, priming, applying roof waterproofing


membrane in accordance to manufacturer's
recommendation on screeded bed (measured separately)

Bituminous waterproof membrane


A to flat surface; finished to falls m2 27.70 27.70 27.70
B to vertical surface m2 27.70 27.70 27.70

Homogeneous thermoplastic waterproof membrane


C to flat surface; finished to falls m2 29.10 29.10 30.60
D to vertical surface m2 28.90 28.90 30.60

Polyurethane waterproof membrane


E to flat surface; finished to falls m2 30.80 30.80 30.80
F to vertical surface m2 30.80 30.80 30.80

2.3 Panel Roofing

50mm thick precast concrete slab in maximum panel size


not exceeding 1000 x 1000mm; complete with 1 layer of
wire mesh Ref No 3315 infilled joints with approved PU
sealant.

Page 7/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN
A Concrete grade 20 to roof slabs; finished to falls m2 37.00 37.70 37.70
B Concrete grade 25 to roof slabs; finished to falls m2 42.80 43.00 43.10

3 METAL ROOFING

3.1 Steel Roofing

Corrugated steel roof covering complete with all


necessary fixing accessories; fixed to steel structural
framing (measured separately)
A 0.42mm thick; Zincalume Steel m2 29.70 29.70 30.00
B 0.48mm thick; Zincalume Steel m2 39.20 39.20 39.60
C 0.42mm thick; Colourbond Steel m2 35.20 35.20 35.60
D 0.48mm thick; Colourbond Steel m2 39.40 39.40 39.80

Curve corrugated steel roof covering complete with all


necessary fixing accessories; fixed to steel structural
framing (measured separately)
E 0.60mm thick; Zincalume Steel m2 56.60 56.60 57.40
F 0.80mm thick; Zincalume Steel m2 63.50 63.50 64.40
G 0.60mm thick; Colourbond Steel m2 65.10 65.10 65.90
H 0.80mm thick; Colourbond Steel m2 72.00 72.00 72.90

4 RAINWATER GOODS

4.1 Flashings

0.61mm thick galvanised steel with Zincalume coating


(unpainted) metal flashing including fixing accessories
A girth not exceeding 300mm girth m 15.30 15.60 16.00
B girth exceeding 300mm but n.e. 600mm girth m 28.50 29.00 29.30

1.0 mm thick galvanised steel with Zincalume coating


(unpainted) metal flushing including fixing accessories
C girth not exceeding 300mm girth m 20.80 21.10 21.30
D girth exceeding 300mm but n.e. 600mm girth m 32.50 33.10 33.30

1mm thick colourbond metal flushing including fixing


accessories
E girth not exceeding 300mm girth m 22.40 22.80 23.00
F girth exceeding 300mm but n.e. 600mm girth m 35.40 36.30 36.50

2mm thick colourbond metal flushing including fixing


accessories
G girth not exceeding 300mm girth m 29.00 29.50 29.80
H girth exceeding 300mm but n.e. 600mm girth m 44.90 45.90 46.10

4.3 UPVC Downpipes

Unplasticied polyvinyl chloride rainwater pipes and fittings;


SS213 Class B; jointing in accordance to manufacturer's
recommendation

Pipes; casting inside reinforced concrete columns


A 100mm diameter m 48.00 48.00 48.00
B 150mm diameter m 62.00 62.00 62.00
C 200mm diameter m 76.10 76.10 76.10

Pipes; fixing to masonry walls; including brackets


D 100mm diameter m 48.00 48.00 48.00
E 150mm diameter m 62.00 62.00 62.00
F 200mm diameter m 76.10 76.10 76.10

Page 8/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN

Pipes; suspending from concrete soffits including hangers

G 100mm diameter m 48.00 48.00 48.00


H 150mm diameter m 62.00 62.00 62.00
I 200mm diameter m 76.40 76.40 76.40

5 SUNDRIES

5.1 Insulation

Insulation material to roof slabs; finished to falls


A 50mm thick fibreglass insulation, density 16 kg/m3 m2 7.90 7.90 7.90
B 25mm thick, ditto m2 6.00 6.00 6.00
C double-sided reinforced aluminum foil insulation paper m2 5.70 5.70 5.70
with 150mm laps
D 25mm thick extruded polystyrene insulation board of m2 10.70 10.70 10.70
density 32kg/m2
E 50mm thick, ditto m2 17.70 17.70 17.70

5.2 Wire Mesh

Wire mesh to roof space including dressing over purlins


(measured net)
A Wire mesh Ref No 3315 (75 x 75 x 1.5mm diameter) m2 4.30 4.40 4.40

5.3 Protection fleece

1 layer of approved geotextile fleece with side lapped


edges (measured nett); laid in accordance with
manufacturer's recommendation
A to roof slab; finished to falls m2 4.60 4.80 4.80

V CARPENTRY AND JOINERY


1 CARCASSING

1.1 Structural Timber

Sawn timber in carpenter's works


A kapur m3 2,118.30 2,118.30 2,118.30
B balau m3 2,366.00 2,440.10 2,521.60
C kempas m3 1,590.30 1,590.30 1,590.30
D chengal m3 3,117.10 3,206.50 3,304.80

1.2 Timber Preservation

Extra over structural timber for pressure impregnation with


a suitable wood preservative to an average dry salt
retention of 5.6kg/m3 and complying with SS 72 and
treated in accordance with SS CP 1
A generally m3 84.90 84.90 84.90

2 FRAMING

2.1 Roof Framing

Carpentry framing in roofs; complete with all necessary


fixing accessories
A 100 x 50mm tanalised kapur rafter m 22.60 22.60 22.60
B 150 x 50mm tanalised kapur rafter m 28.50 28.50 28.50

Page 9/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN

3 LININGS

3.1 Calcium Silicate Boards

Calcium silicate board reinforced with selected fibres and


fillers (Class 0) including pointing
A 6mm thick m2 24.50 24.50 24.50
B 9mm thick m2 33.90 33.90 33.90
C 12mm thick m2 35.90 35.90 35.90

3.2 Cement Building Boards

Cement building board including pointing


A 6mm thick m2 19.60 19.60 19.60
B 12mm thick m2 27.10 27.10 27.10

3.3 Gypsum Boards

Bare finish gypsum board including pointing


A 10mm thick m2 18.90 18.90 18.90
B 13mm thick m2 23.20 23.20 23.20

3.4 Plywoods

Non-waterproofed plywood complying with SS1


A 6mm thick m2 16.90 16.90 16.90
B 12mm thick m2 22.00 22.00 22.00
C 18mm thick m2 27.60 27.60 27.60
D 25mm thick m2 39.50 39.50 39.50

Waterproofed plywood type WBP


E 6mm thick m2 20.70 20.70 20.70
F 12mm thick m2 27.30 27.30 27.30
G 18mm thick m2 34.30 34.30 34.30
H 25mm thick m2 39.80 39.80 39.80

3.5 Laminated Plastics

Laminated plastic sheet to BS 3796 including compatible


adhesive
A 0.8mm thick Formica m2 25.30 25.30 25.30
B 0.8mm thick Print m2 22.30 22.30 22.30
C 1.0mm thick Formica m2 29.60 29.60 29.60

Laminated plastic sheet to BS 3796 including compatible


adhesive
D 1.0mm thick Print m2 24.30 24.30 24.30
E 1.2mm thick Print m2 27.50 27.50 27.50
F 1.3mm thick Print m2 27.50 27.50 27.50
G 1.3mm thick Formica m2 32.90 32.90 32.90

4 WALL INSULATION

4.1 Fibreglass Insulation

Supply and fix fibreglass insulation


A 50mm thick, 48 kg/m3 m2 24.00 24.00 24.00
B 75mm thick, 48 kg/m3 m2 30.50 30.50 30.50

4.2 Mineral Wool Insulation

Page 10/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN
Supply and fix mineral wool insulation
A 25mm thick, 48 kg/m3 m2 13.60 13.60 13.60
B 50mm thick, 48 kg/m3 m2 18.40 18.40 18.40
C 25mm thick, 80 kg/m3 m2 15.90 15.90 15.90

5 PANELLING

5.1 Timber Panelling

100mm wide tongued and grooved wrought boarding fixed


to battens (measured separately)
A 19mm thick kapur m2 46.50 46.50 46.50
B 25mm thick kapur m2 62.80 62.80 62.80
C 13mm thick chengal m2 49.80 49.80 49.80
D 19mm thick chengal m2 56.20 56.20 56.20
E 25mm thick chengal m2 126.50 126.50 126.50

5.2 Woodwool Slab Wall Panelling

Supply and fix woodwool slab to wall


A 50mm thick m2 18.80 18.80 18.80

6 FLOORING

6.1 Floor Boards

100mm wide wrought plain edge floor board fixed to


bearers (measured separately)
A 19mm thick Indonesia teak m2 93.60 93.60 94.20
B 25mm thick Indonesia teak m2 112.80 112.80 113.50
C 19mm thick chengal m2 57.20 57.20 57.60
D 25mm thick chengal m2 68.60 68.60 69.10

100mm wide wrought tongued and grooved floor board


fixed to bearers (measured separately)
E 12mm thick Indonesia teak m2 97.80 97.80 98.30
F 19mm thick Indonesia teak m2 123.10 123.10 123.80
G 25mm thick Indonesia teak m2 145.90 145.90 146.80
H 19mm thick chengal m2 84.60 84.60 85.10
I 25mm thick chengal m2 96.30 96.30 96.90
J 20mm thick white oak m2 168.60 168.60 169.80

6.2 Parquet Flooring

Teak parquet flooring laid to approved pattern, including


levelling, spreading, filling, sanding, cleaning and 3 coats
of clear finish varnish; laid on cement and sand screed
(m/s)
A 12mm thick x 50mm wide x 300-400mm randon length m2 63.10 63.10 64.30
Indonesia teak
B 12mm thick x 50mm wide x 300-400mm randon length m2 73.90 73.90 75.40
Burmese teak

6.3 Timber Flooring

Teak strip flooring laid to approved pattern, including


levelling, spreading, filling, sanding, cleaning and 3 coats
of clear finish varnish; laid on plywood backing (m/s)

A 12mm thick x 70mm wide x 400-1200mm randon length m2 97.70 97.70 98.40
Indonesia teak

Page 11/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN
B 12mm thick x 70mm wide x 400-1200mm randon length m2 112.50 112.50 113.30
Burmese teak
C Extra over for 9mm thick WBP plywood to underside of m2 17.90 17.90 18.00
teak strip flooring (m/s) laid on prepared screed (m/s)
D Extra over for 9mm thick MR plywood to underside of teak m2 21.30 21.30 21.40
strip flooring (m/s) laid on prepared screed (m/s)

7 TIMBER DOORS

7.1 Non Fire-rated Timber Doors; Kapur core

Solid core flush door faced both sides with timber veneer;
complete with hardwood lipping all round vertical core
strips glued and well cramped together (including supply
and installation of sub-frame, frame / architrave and
installation of ironmongery)
A overall size: 900 x 2100 x 38mm thick; single leaf No 632.30 640.70 657.30
B overall size: 900 x 2100 x 45mm thick; single leaf No 696.60 702.80 724.60

Hollow core flush door panel faced both sides with timber
veneer; complete with hardwood lipping all round
(including supply and installation of sub-frame, frame /
architrave and installation of ironmongery)
C overall size: 900 x 2100 x 38mm thick; single leaf No 470.80 477.40 490.80
D overall size: 900 x 2100 x 45mm thick; single leaf No 541.20 546.20 563.90

7.2 Fire-rated Timber Doors

Fire-rated timber door panel faced both sides with timber


veneer; including supply and installation of frame /
architrave and installation of ironmongery and all
accessories to FSB requirements and PSB testing and
labelling
A 1/2 hour fire-rated single leaf door; to suit structural No 962.70 962.70 973.50
opening of 1040 x 2220mm high
B 1/2 hour fire-rated double leaf door; to suit structural No 1,490.50 1,490.50 1,490.50
opening of 1640 x 2220mm high
C 1 hour fire-rated single leaf door; to suit structural opening No 1,144.20 1,144.20 1,156.20
of 1040 x 2220mm high
D 1 hour fire-rated double leaf door; to suit structural No 1,773.40 1,773.40 1,790.90
opening of 1640 x 2220mm high
E 2 hour fire-rated single leaf door; to suit structural opening No 1,551.00 1,551.00 1,551.00
of 1040 x 2220mm high
F 2 hour fire-rated double leaf door; to suit structural No 2,396.80 2,396.80 2,396.80
opening of 1640 x 2220mm high

Fire-rated timber door panel faced both sides with


plywood in paint finish (measured separately); including
supply and installation of metal frame, installation of
ironmongery and accessories to FSB requirements
complete with PSB testing and labelling
G 1/2 hour rated single leaf door; to suit structural opening of No 965.20 965.20 965.20
1040 x 2220mm high
H 1/2 hour rated double leaf door; to suit structural opening No 1,438.00 1,438.00 1,438.00
of 1640 x 2220mm high
I 1 hour rated single leaf door; to suit structural opening of No 1,157.10 1,157.10 1,157.10
1040 x 2220mm high

Page 12/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN
J 1 hour rated double leaf door; to suit structural opening of No 1,743.30 1,743.30 1,743.30
1640 x 2220mm high
K 2 hour rated single leaf door; to suit structural opening of No 1,507.90 1,507.90 1,507.90
1040 x 2220mm high
L 2 hour rated double leaf door; to suit structural opening of No 2,222.50 2,222.50 2,222.50
1640 x 2220mm high

INTERNAL WALLS

8 PARTITIONS

Drywall partition covered both sides with boards complete


with metal studs support, jointing and finishing to give a
flush seamless surface ready for decoration

A 75mm thick walls with gypsum plasterboard on both sides m2 67.50 67.50 67.50

B 75mm thick walls with fibrous plasterboard on both sides m2 78.40 78.40 78.40

C 75mm thick walls with calcium silicate board on both sides m2 86.80 86.80 86.80

One hour fire-rated drywall partition covered both sides


with boards complete with insulation, metal studs support,
jointing and finishing to give a flush seamless surface
ready for decoration
D 100mm thick walls with gypsum plasterboard on both m2 88.80 88.80 88.80
sides
E 100mm thick walls with fibrous plasterboard on both sides m2 99.00 99.00 99.00

F 100mm thick walls with calcium silicate board on both m2 107.40 107.40 107.40
sides

Acoustic drywall partition; achieving STC 48 rating,


covered both sides with boards complete with insulation,
metal studs support, jointing and finishing to give a flush
seamless surface ready for decoration
G 100mm thick walls with gypsum plasterboard on both m2 105.00 105.00 105.00
sides
H 100mm thick walls with fibrous plasterboard on both sides m2 115.30 115.30 115.30

I 100mm thick walls with calcium silicate board on both m2 123.70 123.70 123.70
sides

VI STRUCTURAL STEELWORK
1 Structural Steel

1.1 Mild Steel Members

Bolted and welded structural steel conforming to EN10025


Grade S275 to building
A universal columns kg 5.50 5.80 5.80
B universal beams kg 5.50 5.80 5.80
C square or rectangular hollow sections kg 5.50 5.80 5.80
D circular hollow sections kg 5.50 5.80 5.80
E connection plates kg 5.50 5.80 5.80
F composite beam kg 5.50 5.80 5.80

Page 13/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN
1.2 Off-Site Surface Treatment

Surface treatment to structural steel members in factory

A hot dip galvanising kg 1.20 1.20 1.20


B one coat of primer kg 0.50 0.50 0.50

1.3 Surface Treatment After Erection

Preparing and applying on structural steel surfaces


A one coat of red lead primer m2 2.90 2.90 2.90
B one coat of zinc chromate primer m2 3.10 3.10 3.10

VII METAL WORK


1 ALUMINIUM WINDOWS AND DOORS

1.1 Aluminium Window Frames

Anodised aluminium section frames in single light,


complete with ironmongery, fixing straps, vinyl weather
strips including building-in and pointing frame (glass
measured separately)
A side-hunged window and casement frames m2 295.50 296.20 293.40
B top-hung window frame and sash m2 287.20 288.00 285.40
C sliding window frame and sash m2 267.40 268.40 266.00
D fixed panel window frame m2 244.50 245.10 242.90
E fixed louvred window frame including clips m2 349.90 355.80 355.80
F adjustable louvred window frame including clips m2 404.00 410.60 410.60

Powder coated aluminium section frames in single light,


complete with ironmongery, fixing straps, vinyl weather
strips including building-in and pointing frame (glass
measured separately)
G side-hunged window and casement frames m2 282.20 287.20 287.20
H top-hung window frame and sash m2 278.80 283.80 283.80
I sliding window frame and sash m2 248.20 253.20 253.20
J fixed panel window frame m2 230.00 234.10 234.10
K fixed louvred window frame including clips m2 356.60 362.40 362.40
L adjustable louvred window frame including clips m2 410.60 417.30 417.30

Flurocarbon coating aluminium section frames in single


light, complete with ironmongery, fixing straps, vinyl
weather strips including building-in and pointing frame
(glass measured separately)
M side-hunged window and casement frames m2 330.50 335.50 335.50
N top-hung window frame and sash m2 331.20 336.20 336.20
O sliding window frame and sash m2 313.90 318.90 318.90
P fixed panel window frame m2 279.80 284.80 284.80
Q fixed louvred window frame including clips m2 370.10 376.00 376.00
R adjustable louvred window frame including clips m2 444.20 452.50 452.50

1.2 Aluminium Louvre Window

Louvred blades with both ends fixed to metal clips, in


single light; complete with fixing accessories
A in anodised aluminium finish m2 359.90 366.60 366.60
B in aluminium flurocarbon finish m2 396.90 405.20 405.20

1.3 Aluminium Door Frames

Page 14/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN
Anodised aluminium section frames in single light,
complete with ironmongery, fixing straps, vinyl weather
strips including building-in and pointing frame; with height
not exceeding 3m high (glass measured separately)

A side-hunged door and casement frames m2 295.50 300.50 300.50


B sliding door frame and sash m2 310.20 314.30 314.30
C fixed panel door frame m2 250.00 253.30 253.30

Powder coated aluminium section frames in single light,


complete with ironmongery, fixing straps, vinyl weather
strips including building-in and pointing frame; with height
not exceeding 3m high (glass measured separately)

D side-hunged door and casement frames m2 299.90 304.90 304.90


E sliding door frame and sash m2 305.60 310.60 310.60
F fixed panel door frame m2 263.40 267.50 267.50

2 Metal Cladding

2.1 Aluminium

Aluminium cladding panels complete with all necessary


fixing accessories
A 2mm thick panel in flurocarbon coated finish; generally m2 314.30 320.10 320.10
B 2mm thick panel in powder coated finish; generally m2 286.90 291.90 291.90

Perforated aluminium cladding panels complete with all


necessary fixing accessories
C 2mm thick panel in flurocarbon coated finish; generally m2 337.30 343.20 343.20
D 2mm thick panel in powder coated finish; generally m2 306.70 311.70 311.70

2.2 Stainless Steel

Stainless steel grade 316 cladding panels complete with


all necessary fixing accessories
A 2mm thick panel in mirror finish; generally m2 370.00 370.00 370.00
B 2mm thick panel in hairline finish; generally m2 370.60 370.60 370.60
C 2mm thick panel in 2B finish; generally m2 390.40 390.40 390.40

3 Metal Doors

3.1 Blast Door

Air tight blast door consist of door leaf, frame,


ironmongery, stainless steel ventilation sleeves including
fragmentation plate; coated with 1 coat of cathodic electro
deposition (CED) primer complete with all fixing
accessories and commissioning
A single leaf; size: 900 x 1900mm high no 1,191.70 1,191.70 1,191.70
B single leaf; size: 1000 x 2055mm high no 1,360.00 1,360.00 1,360.00

3.2 Refuse Hoppers and Refuse Chute Doors

1/2 hr fire rated air tight self-closing single leaf refuse


hopper complete with ironmongery, PSB label and fixing
accessories
A size: 450 x 350mm in aluminium finish no 297.20 297.20 297.20
B size: 450 x 350mm in stainless steel finish no 342.30 342.30 342.30

3.3 Roller Shutter

Page 15/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN

Manually operated roller shutter, in non-corrosive


aluminium finish; complete with ironmongery, PSB label
and fixing accessories
A non fire-rated; generally m2 325.00 331.70 333.60
B 1/2 hour fire-rated; generally m2 502.50 502.50 502.50

Electric motorised operated roller shutter, in non-corrosive


aluminium finish; complete with operating gear, casing,
ironmongery, PSB label and fixing accessories

C non fire-rated; generally m2 555.60 567.30 570.50


D 1/2 hour fire-rated; generally m2 667.10 667.10 670.50

3.4 Fire-rated Metal Door

Single leaf metal flush door consisting of door leaf and


frames with primer finish, ironmongery and fixing
accessories to F.S.B. requirements and PSB labelling
A 1/2 hour fire-rated; generally m2 600.00 611.70 611.70
B 1 hour fire-rated; generally m2 704.40 717.80 717.80
C 2 hour fire-rated; generally m2 813.40 828.40 828.40

3.5 Non Fire-rated Metal Door

Metal flush door consisting of door leaf and frames,


complete with ironmongery and fixing accessories
A single leaf mild steel door with primer finish m2 580.80 592.50 592.50
B double leaves mild steel door with primer finish m2 555.80 565.80 565.80
C single leaf powder coated aluminium door m2 595.90 607.60 607.60
D double leaves powder coated aluminium door m2 630.70 644.00 644.00

4 RAILINGS

4.1 Stainless Steel

1100mm high x 12.76mm thick clear tempered laminated


glass railing complete with top railing; glass framed in 'c'
channel all round and fixed to vertical support anchor
embeded in concrete; the whole constructed using
stainless steel (grade 304) flat bar in hairline finish

A horizontal balustrades m 909.90 958.50 958.50


B raking balustrades m 953.10 1003.60 1003.60

1000mm high stainless steel (grade 304) railing in hairline


finish constructed of top railing fixed on vertical support
anchor to concrete kerb (measured separately); infill with
vertical baluster welded to horizontal rail at top and
bottom; the whole constructed using flat bar

C horizontal balustrades m 411.70 434.50 434.50


D raking balustrades m 440.00 463.60 463.60

Stainless steel (grade 304) wall mounted tubular railing in


hairline finish welded to 'L' shape steel bracket bolted onto
wall
E horizontal balustrades m 103.20 105.20 105.20
F raking balustrades m 106.50 108.20 108.20

4.2 Mild Steel

Page 16/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN

1000mm high hot dipped galvanised mild steel railing


constructed of handrail fixed on vertical support anchor to
concrete kerb (measured separately); infill with vertical
balusters welded to horizontal rail at top and bottom; the
whole constructed using flat bar
A horizontal balustrades m 158.50 161.80 161.80
B raking balustrades m 165.10 168.40 168.40

Hot dipped galvanised mild steel wall mounted tubular


railing welded to 'L' shape steel bracket bolted onto wall
C horizontal balustrades m 68.10 69.10 69.10
D raking balustrades m 75.60 77.30 77.30

5 PROPRIETORY DEMOUNTABLE PARTITIONS

5.1 Proprietory Toilet Cubicle

Toilet cubicles complete with door and partition


constructed of solid phenolic core face both sides with
laminated plastic complete with aluminium framing and
nylon fixing accessories and ironmongery
A Floor mounted system cubicl 1,079.70 1,079.70 1,088.10
e
B Ceiling hung system cubicl 1,207.70 1,207.70 1,217.40
e

VIII FLOOR FINISHES


1 IN-SITU FINISHES

1.1 Plain Paving

Cement and sand (1:3) paving trowelled smooth


A average 25mm thick; generally m2 20.70 21.60 22.90
B average 30mm thick; generally m2 22.10 23.00 24.30
C average 38mm thick; generally m2 23.90 24.80 25.70
D average 50mm thick; generally m2 28.60 29.70 30.10
E add or deduct each 10mm thickness m2 2.30 2.30 2.30

1.2 Waterproofed Paving

Cement and sand (1:3) paving trowelled smooth including


approved waterproofing additive
A average 25mm thick; generally m2 23.70 25.00 26.20
B average 30mm thick; generally m2 24.60 25.80 27.10
C average 38mm thick; generally m2 25.80 27.10 28.50
D average 50mm thick; generally m2 31.30 32.60 32.60

1.3 Hardened Paving

Cement and sand (1:3) paving trowelled smooth; including


approved light duty metallic hardener (0.25kg of hardener
per kg of cement)
A average 25mm thick; generally m2 25.80 27.00 27.00
B average 50mm thick; generally m2 30.00 31.50 31.50

Page 17/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN
Cement and sand (1:3) paving trowelled smooth; including
approved heavy duty metallic hardener (0.5kg of hardener
per kg of cement)
C average 25mm thick; generally m2 29.60 30.90 31.10
D average 50mm thick; generally m2 34.50 36.20 36.40

1.4 Liquid applied floor hardener

Supply and apply 3 coats of liquid applied hardener to


concrete surface
A to floor; generally m2 38.60 39.40 39.40

1.5 Anti-skid Coating

Supply and apply epoxy coatings to concrete surface


A to floor; generally m2 20.00 20.00 20.00

1.6 Granolithic Paving

Granolithic paving in cement, sand and granite chippings


(2:1:5) mortar to concrete surface; including scrubbing to
produce exposed aggregate finish
A average 25mm thick; generally m2 41.50 43.80 43.80
B average 32mm thick; generally m2 43.00 45.40 45.40
C average 50mm thick; generally m2 51.30 54.00 54.00

1.7 Screed Bed

Cement and sand (1:3) screed to receive floor finishes


(measured separately)
A 13mm thick m2 15.90 16.60 16.60
B 20mm thick m2 18.00 18.70 18.70
C 25mm thick m2 19.40 20.10 20.10
D 32mm thick m2 20.70 21.60 21.70
E 38mm thick m2 22.00 22.90 22.90
F 50mm thick m2 24.10 25.10 25.10
G add or deduct each 10mm thickness m2 2.30 2.30 2.30

2 CARPET FINISHES

2.1 Labour

Supply labour and compatible adhesive for laying carpet;


on smooth and levelled surface (measured separately)

A carpet tile to floor; generally m2 9.90 9.90 9.90


B broadloom carpet to floor; generally m2 11.30 11.30 11.30
C Extra over for supply and install of foam rubber underlay m2 3.00 3.00 3.00

3 VINYL FINISHES

3.1 Labour

Supply labour and compatible adhesive for laying vinyl


tiles; on smooth and levelled surface (measured
separately)
A to floor; generally m2 13.60 13.60 13.60

4 STONE FINISHES

Page 18/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN

4.1 Labour

Supply labour and compatible adhesive for laying granite /


marble slab including pointing with coloured grout

A to floor; generally m2 75.40 77.30 77.30


B to skirting ne 150mm high, generally m 15.90 15.90 15.90
C to skirting 150-300mm high, generally m 21.70 21.70 21.70

5 TILE FINISHES

5.1 Labour

Supply labour and compatible adhesive for laying ceramic


/ homogeneous / porecelain tiles including pointing with
coloured grout
A to floor; generally m2 42.80 42.80 42.80
B to skirting ne 150mm high, generally m 12.00 12.00 12.00
C to skirting 150-300mm high, generally m 16.50 16.50 16.50

Supply labour and compatible adhesive for laying mosaic


tiles including pointing with coloured grout
D to floor; generally m2 52.30 52.30 52.30
E to skirting ne 150mm high, generally m 14.10 14.10 14.10
F to skirting 150-300mm high, generally m 20.50 20.50 20.50

6 BRICK / BLOCK PAVING

6.1 Interlocking Pavers

Supply and lay interlocking pavers complete with matching


colour pointing, interlocked together and laid to patterns
including levelling and compacting sand bed
A 80mm thick brick paver to floor; generally m2 50.60 52.20 52.20
B 80mm thick concrete paver to floor; generally m2 60.10 61.80 61.80

7 GLASS BLOCKS

7.1 Glass Block Floors

Supply and lay standard glass blocks with compactible


adhesive including pointing with coloured grout

A 95mm thick to floor; generally m2 366.30 366.30 366.30

8 RAISED FLOORING

8.1 Raised Floor System

Supply and install raised accessed floor system with bare


finish
A overall 150mm high m2 74.20 74.20 74.20
B overall 300mm high m2 96.80 96.80 96.80

9 SUNDRIES

9.1 Dividing Strip

Page 19/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN
Supply and fix 25mm high dividing strip to edge of floor
finish
A 2mm thick aluminium m 9.60 9.60 9.60
B 2mm thick stainless steel m 15.50 15.80 15.80

9.2 Tactile floor

Supply and install tactile tiles; on cement and sand screed


(measured separately)
A 300 x 300mm tactile tiles to floor; generally m2 118.60 118.60 118.60

IX WALL FINISHES
1 IN-SITU FINISHES

1.1 Smooth Finished Plaster

Plastering in cement and sand (1:4) mortar plasticiser


finished with a steel trowel to concrete or brick surface
A 6mm thick; internal m2 15.70 16.50 16.50
B 13mm thick; internal m2 20.80 21.60 21.70
C 20mm thick; internal m2 24.50 25.60 25.70
D 20mm thick; external m2 26.80 28.00 28.10

1.2 Skim Coat Plaster

Skim coat plaster finished smooth to concrete surfaces


A to wall/column, generally m2 11.90 12.10 12.10

1.3 Screed Backing

Cement and sand (1:3) screeded backing finished with


wood float to concrete or brick surface to receive tiling
(measured separately)
A 13mm thick; generally m2 19.00 19.70 20.50
B 20mm thick; generally m2 21.20 22.00 22.80

1.4 Aggregate Plaster

Granite aggregate plaster in cement and granite chippings


(1:2) mortar with plasticiser to concrete or brick surface;
including scrubbing to produce exposed aggregate finish

A 20mm thick; generally m2 28.30 29.00 29.00


B 25mm thick; generally m2 29.30 30.00 30.00

2 TILE FINISHES

2.1 Labour

Supply labour and compatible adhesive for laying ceramic


/ homogenous / porcelain tiles including pointing with
coloured grout
A to walls; generally m2 40.20 40.20 40.70

Supply labour and compatible adhesive for laying mosaic


tiles including pointing with coloured grout
B to walls; generally m2 50.90 50.90 51.70

3 STONE FINISHES

Page 20/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN

3.1 Labour

Supply labour and compatible adhesive for laying granite /


marble slabs including pointing with coloured grout

A to walls; generally m2 76.20 76.20 77.20

Supply labour and compatible adhesive for laying granite /


marble slabs including mechanical fixing and pointing with
coloured grout
B to walls; generally m2 180.10 180.10 180.10

4 SHEET FINISHES

4.1 Labour

Supply labour and compatible adhesive for fixing


decorative fabric or vinyl paper including cutting border
strips, corners and motifs to profile
A to walls; generally m2 7.50 7.50 7.50

X CEILING FINISHES
1 IN-SITU FINISHES

1.1 Skim Coat Plaster

Skim coat plaster finished smooth to concrete surfaces


A to ceiling, generally m2 11.60 11.80 11.80
B Extra over for every 1.5m high m2 1.40 1.40 1.40

2 SUSPENDED CEILINGS

2.1 Metal Framed Ceilings (Exposed Grid)

Ceiling board fixed to an appoved pattern on exposed grid


type suspended system and framing; complete with
concealed galvanised nails including framing of board to
all ends of grids along the boundaries; not exceeding
3.5m high

A 600 x 600 x 15mm thick Mineral fibreboard, pre-finished m2 35.30 35.80 35.80
face pattern panels with a white paint finish
B 600 x 600 x 15mm thick Acoustical mineral fibreboard, pre- m2 37.90 38.60 38.60
finished face pattern panels with a white paint finish
C 600 x 600 x 20mm thick Acoustical mineral fibreboard, pre- m2 39.70 40.40 40.40
finished face pattern panels with a white paint finish
D 600 x 600 x 9mm thick calcium silicate board m2 41.90 42.50 42.50
E 600 x 600 x 13mm thick calcium silicate board m2 46.40 47.00 47.00
F 600 x 600 x 9mm thick cement board m2 40.80 41.50 41.50
G 600 x 600 x 12mm thick cement board m2 48.30 49.20 49.20
H 600 x 600 x 9mm thick fibrous gypsum board m2 35.30 35.80 35.80
I 600 x 600 x 13mm thick fibrous gypsum board m2 38.20 38.90 38.90
J Extra over for every 1.5m high m2 2.40 2.40 2.40

2.2 Metal Framed Ceilings (Concealed Grid)

Page 21/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN
Ceiling board fixed to an approved pattern on concealed
type suspended system and framing; jointing and finishing
to give a flush seamless surface ready to receive
decoration; not exceeding 3.5m high
A 15mm thick acoustic fibreboard m2 43.80 44.40 44.40
B 20mm thick acoustic fibreboard m2 49.60 50.30 50.30
C 9mm thick fibrous gypsum board m2 33.60 34.20 34.20
D 12mm thick fibrous gypsum board m2 40.00 40.70 40.70
E 9mm thick moisture resistance fibrous gypsum board m2 36.10 36.80 36.80
F 12mm thick moisture resistance fibrous gypsum board m2 39.00 39.70 39.70
G 9mm thick calcium silicate board m2 40.00 40.60 40.60
H 13mm thick calcium silicate board m2 47.60 48.20 48.20
I 9mm thick cement building board m2 46.80 47.50 47.50
J Extra over for every 1.5m high m2 2.40 2.40 2.40

2.3 Metal Ceilings

Metal panel ceiling fixed to an approved pattern; including


metal sheet laid in proprietary system and concealed
supports; not exceeding 3.5m high
A Aluminium strip ceiling of ribs with baked enamel finish m2 86.40 86.40 86.40
fixed to suspended carrier rails 0.60mm thick x 100mm
wide module
B Steel strip ceiling of ribs with baked enamel finish fixed to m2 69.60 69.60 69.60
suspended carrier rails 84mm wide module
C Aluminium perforated ceiling system fixed to perforated m2 112.10 113.80 113.80
clip-in system'
D Aluminium open cell ceiling system comprising U shaped m2 110.10 110.10 110.10
blades 9mm wide x 40mm thick and suspension system,
blade at 100mm
E Aluminium plank ceiling system fixed to perforated clip-in m2 106.40 106.40 106.40
system
F Extra over for every 1.5m high m2 2.80 2.80 2.80

XI GLAZING
1 STANDARD GLASS

1.1 In Panes

Obscured glass fixed to metal frame (m/s)


A 5mm thick m2 59.70 59.80 60.10
B 6mm thick m2 64.80 64.80 65.10

Clear float glass fixed to metal frame (m/s)


C 6mm thick m2 59.90 60.30 60.70
D 8mm thick m2 67.10 67.10 67.60
E 10mm thick m2 103.90 104.10 104.80
F 12mm thick m2 125.90 125.90 125.90

Tinted float glass fixed to metal frame (m/s)


G 5mm thick m2 45.20 45.20 45.50
H 6mm thick m2 57.80 57.80 58.10
I 8mm thick m2 80.40 80.40 80.80
J 10mm thick m2 137.50 137.50 137.50
K 12mm thick m2 157.30 157.30 157.30

Clear laminated tempered glass in metal frame (m/s)


L 12.76mm thick (6mm tempered + 0.76mm PVB + 6mm m2 187.50 187.50 187.50
float)

Page 22/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN
M 17.9mm thick (8mm tempered + 1.9mm PVB + 8mm float) m2 260.00 260.00 260.00

Low emittance (Low-E) clear float glass to metal frame


(m/s)
N 6mm thick m2 92.90 92.90 92.90
O 8mm thick m2 112.40 112.40 112.40

Low emittance (Low-E) clear tempered glass to metal


frame (m/s)
P 6mm thick m2 111.00 111.00 111.00
Q 8mm thick m2 137.50 137.50 137.50

Clear tempered glass fixed onto metal frame (m/s)


R 12mm thick m2 201.10 201.10 201.10

Tinted wired glass fixed onto metal frame (m/s)


S 6mm thick m2 148.50 148.50 148.50

1.2 In Louvres

Obscured glass with ends fixed to metal clips


A 100mm wide x 600mm long x 6mm thick No 5.30 5.30 5.30
B 150mm wide x 600mm long x 6mm thick No 6.60 6.60 6.60

Clear float glass with ends fixed to metal clips


C 100mm wide x 600mm long x 6mm thick No 5.00 5.00 5.00
D 150mm wide x 600mm long x 6mm thick No 5.80 5.80 5.80

Tinted float glass with ends fixed to metal clips


E 100mm wide x 600mm long x 6mm thick No 5.20 5.20 5.20
F 150mm wide x 600mm long x 6mm thick No 6.40 6.40 6.40

Tinted wired glass with ends fixed to metal clips


G 100mm wide x 600mm long x 6mm thick No 12.60 12.60 12.60
H 150mm wide x 600mm long x 6mm thick No 17.00 17.00 17.00

1.3 In Panels/Doors

Clear float toughened glass fixed to metal frame (m/s)


A 6mm thick m2 95.70 95.70 95.70
B 8mm thick m2 120.90 120.90 120.90
C 10mm thick m2 146.90 146.90 146.90

Tinted float toughened glass fixed to metal frame (m/s)


D 6mm thick m2 98.40 98.40 98.40
E 8mm thick m2 126.60 126.60 126.60
F 10mm thick m2 161.60 161.60 161.60

Low emittance (Low-E) clear float glass fixed to metal


frame (m/s)
G 6mm thick m2 93.40 93.40 93.40
H 8mm thick m2 112.70 112.70 112.70
I 10mm thick m2 140.10 140.10 140.10

2 SPECIAL GLASS

2.1 Mirrors

Frameless mirror glass with copper backing in polished


pencil edge; concealed fixing, plugging and screwing to
walls

Page 23/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN
A 6mm thick clear mirror m2 216.70 217.00 218.30
B 6mm thick tinted mirror m2 224.30 224.70 226.10

Beveling to straight edges including internal mitres and


scallops
C 8mm wide m 64.80 64.80 65.30
D 10mm wide m 72.00 72.00 72.50
E 12mm wide m 81.20 81.20 81.80

Aluminium framed mirror glass with copper backing;


concealed fixing, plugging and screwing to walls
F 6mm thick clear mirror m2 259.50 259.50 259.50
G 6mm thick tinted mirror m2 265.10 265.10 265.10

3 SHOWER SCREEN

Framed shower screen with clear tempered glass;


comprising one fixed panel and one swing door complete
with polished stainless steel L-shaped handle,
ironmongeries and all necessary fixing accessories

A 8mm thick glazing m2 348.10 348.10 348.10


B 10mm thick glazing m2 373.90 373.90 373.90

Frameless clear tempered glass shower screen;


comprising one fixed panel and one swing door complete
with polished stainless steel L-shaped handle,
ironmongeries and all necessary fixing accessories

C 10mm thick glazing m2 321.60 321.60 321.60


D 12mm thick glazing m2 366.60 366.60 366.60

XII PAINTING
1 INTERNAL PAINTING

1.1 General Surfaces

Preparing, sealing, applying paint on plastered or concrete


surfaces
A one sealer coat and two finishing coats of acrylic emulsion m2 4.30 4.30 4.30
paint
B one sealer coat and two finishing coats of acrylic m2 4.70 4.70 4.70
elastomeric paint
C one sealer coat, one undercoat and two finishing coats of m2 4.80 4.80 4.80
acrylic emulsion paint
D one sealer coat, one undercoat and two finishing coats of m2 5.80 5.80 5.80
acrylic elastomeric paint
E one sealer coat, one texture coat and two finishing coats m2 10.00 10.00 10.00
of emulsion paint
F one sealer coat, one texture coat and two finishing coats m2 13.20 13.20 13.20
of acrylic elastomeric paint

1.2 Timber Surfaces

Preparing, priming, applying paint on timber surfaces


A two coats of aluminium wood primer m2 8.00 8.00 8.00
B two coats of wood preservative painting m2 3.80 3.80 3.80
C two coats of stain and two coats of wax polish m2 8.00 8.00 8.00
D two coats of clear varnish m2 11.50 11.50 11.50

Page 24/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN
E one coat of aluminium wood primer, one undercoat and m2 12.00 12.00 12.00
two finishing coats of synthetic enamel paint
F one coat of stain and three coats of clear polyurethane m2 12.60 12.60 12.60
G two coats staining, varnishing three coats of translucent m2 14.40 14.40 14.40
finish on wood

1.3 Metal Surfaces

Preparing, priming, applying paint on metal surfaces


A two coats of aluminium paint m2 4.50 4.50 4.50
B one undercoat and two finishing coats of synthetic enamel m2 11.00 11.00 11.00
paint
C one coat of zinc chromate primer, one alkyd resin m2 12.90 12.90 12.90
undercoat and two finishing coats of synthetic enamel
paint

1.4 Weldmesh Surfaces

Preparing, priming, applying paint on metal surfaces


(measured flat on one side)
A two coats of aluminium paint m2 10.80 10.80 10.80
B one undercoat and two finishing coats of synthetic enamel m2 15.90 15.90 15.90
paint
C one coat of zinc chromate primer, one alkyd resin m2 16.30 16.30 16.30
undercoat and two finishing coats of synthetic enamel
paint

1.5 Large Metal Pipe Surfaces

Preparing, priming, applying paint on large metal pipes


A two coats of aluminium primer, one undercoat and two m 4.30 4.30 4.30
finishing coats of synthetic enamel paint
B two coats of zinc chromate primer, one undercoat and two m 4.20 4.20 4.20
finishing coats of synthetic enamel paint

1.6 Small Metal Pipe Surfaces

Preparing, priming, applying paint on small metal pipes


A two coats of aluminium primer, one undercoat and two m 3.30 3.30 3.30
finishing coats of synthetic enamel paint
B two coats of zinc chromate primer, one undercoat and two m 3.50 3.50 3.50
finishing coats of synthetic enamel paint

1.7 Large UPVC Pipe Surfaces

Preparing, priming, applying paint on large uPVC pipes


A one coat of polyvinyl acetate primer, one undercoat and m 3.40 3.40 3.40
two finishing coats of synthetic enamel paint

1.8 Small UPVC Pipe Surfaces

Preparing, priming, applying paint on small uPVC pipes


A one coat of polyvinyl acetate primer, one undercoat and m 2.80 2.80 2.80
two finishing coats of synthetic enamel paint

Page 25/26
ITEM DESCRIPTION UNIT 2022Q1 2022Q2 2022Q3
MEAN MEAN MEAN
1.9 Fire Protection

Supply and spray vermiculite to general surfaces


A 13mm thick m2 25.30 25.30 25.30
B 25mm thick m2 33.70 33.70 33.70
C 50mm thick m2 46.30 46.30 46.30

2 EXTERNAL PAINTING

2.1 General Surfaces

Preparing, sealing, applying paint on plastered or concrete


surfaces
A one sealer coat and two finishing coats of weathershield m2 6.00 6.00 6.00
emulsion paint
B one sealer coat and two finishing coats of acrylic m2 6.50 6.50 6.50
elastomeric paint
C one sealer coat, one texture coat and two finishing coats m2 10.40 10.40 10.40
of weathershield emulsion paint
D one sealer coat, one texture coat and two finishing coats m2 12.50 12.50 12.50
of acrylic elastomeric paint
E three coats of water based high build acrylic resin texture m2 12.70 12.70 12.70
coat incorporating natural granite chip c/w clear top coat

Preparing, sealing, applying paint on fairface mansory


surfaces
F two coats of water repellant solution m2 4.60 4.60 4.60

3 GENERAL

3.1 Labour

Supply labour to prepare and apply paint on


A concrete or plastered surface m2 1.70 1.70 1.70
B timber surface m2 1.70 1.70 1.70
C metal surface m2 1.70 1.70 1.70
D large pipe surface m 1.70 1.70 1.70
E small pipe surface m 1.70 1.70 1.70

Page 26/26

You might also like