Royal Live Center
Royal Live Center
Royal Live Center
Royal live centers are widely regarded by top metalworking professionals as the best live centers available anywhere in the world. Each Royal live center is a finely crafted tool, incorporating the highest quality steels, bearings, and seals. Manufactured to exacting tolerances, all Royal live centers are guaranteed accurate to + 0.00005" TIR or better. Royal Products offers a broad range of standard live center models to suit virtually all turning applications. We also design and build hundreds of custom centers each year to meet special customer requirements. Custom live centers from Royal Products are competitively priced and are held to the same high manufacturing tolerances as our standard models.
62
The new, exclusive Royal Roto-Shield represents a breakthrough in live center technology, significantly increasing the effective operating life. Royal Roto-Shield Technology consists of two main components: - A live center point machined from a solid bar which incorporates a specially-shaped steel coolant slinger - A long-life, spring-loaded seal that is resistant to abrasion, high temperatures, and virtually all metalworking fluids A dramatic increase in operating life is achieved through the following effects: - Coolant is deflected, keeping it from penetrating the center - Bearings are protected from harmful fines and dust - Seal wear is minimized - Lubricating grease lasts longer and retains consistency
The Royal Roto-Shield is now a standard feature on the following Royal Live Center models:
- High Precision Quad Bearing - High Precision CNC Quad Bearing - Heavy-Duty Spindle Type - Heavy-Duty CNC Spindle Type - High-Speed Precision - Super Quad Extra Heavy-Duty
Hi g h-P r e s s u r e C o o l a nt Ap p r o v e d
In s i s t o n Ro t o-S h i e l d Te c h n o l o g y O n l y Av a i l a b l e o n Ro y a l Li v e C e n t e r s
63
Excellent Thrust Load Capacities A high-capacity thrust bearing protects the center from excessive axial loads, one of the biggest enemies of any live center.
Highest Accuracy The point on every Royal Live Center is guaranteed to + 0.00005" TIR. This guaranteed accuracy is the best in the industry.
Long Life Seal A long-life, spring-loaded seal that is resistant to abrasion, high temperatures, and virtually all metalworking fluids is standard on many Royal live center models.
Concentric Seal Contact A close-tolerance press-fit between the seal retainer and live center body is superior to a threaded fit because it ensures that the seal makes even, concentric contact with the rotating point. Threaded retainers push the seal off-center by the very nature of their design.
High Workpiece Weight Ratings A precision, double-row angular-contact bearing provides high workpiece weight ratings for turning large, heavy parts. Our 2&3 MT models are equipped with a single-row bearing for reduced turning resistance and higher operating speeds. The single-row bearing on the smaller models also allows for a shorter head length, keeping the load concentrated closer to the tailstock for rigidity. Some manufacturers promote the fact that they use double-row bearings on all models, but the gain in workpiece weight capacity for such a small center is overshadowed by reduced operating speeds, increased point drag, and increased risk of flexing.
64
Hi g h-P r e s s u r e C o o l a nt Ap p r o v e d
Best Warranty All Royal Live Centers carry a one-year warranty against failure due to manufacturing defects. Other U.S. manufacturers only offer a 90-day warranty, and most imported centers carry no warranty at all. Fortunately, Royal Products accepts all brands of centers for our Rebuild/Exchange Program so it is very easy for you to upgrade to a Royal Live Center. See page 50 for details.
Royal Point
D1 = Diameter of Royal Point = .603" D2 = Diameter of Other Brand Point = .465" Cross-Sectional Area of Royal Point = .285 sq. in. Cross-Sectional Area of Other Brand Point = .170 sq. in. The cross-sectional area of the point on the Royal Center is 68% larger than that of the other brand, making the Royal point much more rigid and less likely to deflect under load. Royal's thick, beefy point offers superior rigidity, resulting in tighter part tolerances and chatter-free surface-finishes.
65
REBUILD/EXCHANGE PROGRAM
Tu r n t h i s ....
.... i n t o t h i s!
Rebuilt centers are guaranteed to cost no more than 40% the price of new.
Note Trade-in discount does not apply for custom centers.
66
- 2MT 6MT - Load Capacity: 885 5,240 lbs. - 3,000 6,000 rpm
- 2MT 6MT - Load Capacity: 465 2,210 lbs. - 3,000 6,000 rpm
- 2MT 6MT - Load Capacity: 725 4,080 lbs. - 3,500 6,000 rpm
- 2MT 6MT - Load Capacity: 375 2,420 lbs. - 3,500 6,500 rpm
- 4MT 7MT - Load Capacity: 3,325 12,130 lbs. - 2,500 4,000 rpm
Value-Turn Pages 80 81
Versa-Turn Pages 84 85
- 1MT 5MT & Straight Shank - Load Capacity: 390 750 lbs. - 4,500 5,000 rpm
- 2MT 5MT & Straight Shanks - Load Capacity: 150 785 lbs. - 4,500 5,000 rpm
- 2MT 5MT - Load Capacity: 330 1,165 lbs. - 3,500 5,000 rpm
Changeable-Point Pages 90 92
- 2MT 5MT - Load Capacity: 475 845 lbs. - 4,000 5,000 rpm
- 3MT 6MT - Load Capacity: 615 1,450 lbs. - 3,500 5,000 rpm
- 1MT 5MT - Load Capacity: 390 1,070 lbs. - 3,500 6,000 rpm
67
Body and point are hardened and ground for strength and extended operating life.
Bearing life is significantly extended with the exclusive Royal Roto-Shield coolant slinger and a long-life, spring-loaded seal that is resistant to abrasion, high temperatures, and virtually all metalworking fluids.
The point extends into the body where it is supported by a needle roller bearing, which further increases rigidity, reduces point deflection, and dampens vibration.
Three precision angular-contact bearings are secured to the point with a locknut to form a rigid, preloaded assembly. This design is similar to a machine tool spindle cartridge and provides outstanding accuracy and rigidity.
An excellent choice for precision turning, grinding, and hard-turning. Precision, preloaded bearing assembly provides exceptional rigidity and accuracy. Low-profile head offers superior tool clearance. Exclusive Roto-Shield coolant slinger and upgraded seal provide outstanding bearing
68
B G F E
Hi g h-P r e s s u r e C o o l a nt Ap p r o v e d
2 MT 3 MT 4 MT 5 MT 5 MT HD 6 MT HD
* Maximum recommended operating limit. Operating above this speed could result in heat build-up and accelerated bearing wear.
In s i s t o n Ro t o-S h i e l d Te c h n o l o g y O n l y Av a i l a b l e o n Ro y a l Li v e C e n t e rs
69
Body and point are hardened and ground for strength and extended operating life.
Standard point angle is 60 +15'. -0 The point extends into the body where it is supported by a needle roller bearing, which further increases rigidity, reduces point deflection, and dampens vibration.
Bearing life is significantly extended with the exclusive Royal Roto-Shield coolant slinger and a long-life, spring-loaded seal that is resistant to abrasion, high temperatures, and virtually all metalworking fluids.
Three precision angular-contact bearings are secured to the point with a locknut to form a rigid, preloaded assembly. This design is similar to a machine tool spindle cartridge and provides outstanding accuracy and rigidity.
An excellent choice for precision turning, grinding, and hard-turning. Precision, preloaded bearing assembly provides exceptional rigidity and accuracy. Low-profile head and extended point combine to offer superior tool clearance. Exclusive Roto-Shield coolant slinger and upgraded seal provide outstanding bearing
70
B G H I F E
Hi g h-P r e s s u r e C o o l a nt Ap p r o v e d
2 MT 3 MT 4 MT 5 MT 5 MT HD 6 MT HD
* Maximum recommended operating limit. Operating above this speed could result in heat build-up and accelerated bearing wear.
In s i s t o n Ro t o-S h i e l d Te c h n o l o g y O n l y Av a i l a b l e o n Ro y a l Li v e C e n t e rs
71
Body and point are hardened and ground for strength and durability.
The thick, rigid point extends into the shank where it is supported by a large needle bearing for increased strength and vibration dampening.
Standard point angle is 60 +15'. -0 A high capacity thrust bearing enables this center to handle extreme axial loads one of the biggest potential causes of failure for any live center. Bearing life is significantly extended with the exclusive Royal Roto-Shield coolant slinger and a long-life, spring-loaded seal that is resistant to abrasion, high temperatures, and virtually all metalworking fluids.
A precision, double-row angular-contact bearing provides high workpiece weight ratings for turning large, heavy parts. Smaller 2&3 MT models are not typically used to support very large workpieces so they are instead equipped with a single-row bearing that turns more freely and allows for higher speeds.
Proudly Made in U.S.A.
One of our most popular models an excellent heavy-duty live center designed to handle
72
B G F E
Hi g h-P r e s s u r e C o o l a nt Ap p r o v e d
2 MT 3 MT 4 MT 5 MT 6 MT
* Maximum recommended operating limit. Operating above this speed could result in heat build-up and accelerated bearing wear.
In s i s t o n Ro t o-S h i e l d Te c h n o l o g y O n l y Av a i l a b l e o n Ro y a l Li v e C e n t e rs
73
Body and point are hardened and ground for strength and durability.
The thick, rigid point extends into the shank where it is supported by a large needle bearing for increased strength and vibration dampening. Bearing life is significantly extended with the exclusive Royal Roto-Shield coolant slinger and a long-life, spring-loaded seal that is resistant to abrasion, high temperatures, and virtually all metalworking fluids. A high capacity thrust bearing enables this center to handle extreme axial loads one of the biggest potential causes of failure for any live center.
A precision, double-row angular-contact bearing provides high workpiece weight ratings for turning large, heavy parts. Smaller 2&3 MT models are not typically used to support very large workpieces so they are instead equipped with a single-row bearing that turns more freely and allows for higher speeds.
One of our most popular models an excellent heavy-duty live center designed to handle
74
B G H I F E
Hi g h-P r e s s u r e C o o l a nt Ap p r o v e d
2 MT 3 MT 4 MT 5 MT 6 MT
* Maximum recommended operating limit. Operating above this speed could result in heat build-up and accelerated bearing wear.
In s i s t o n Ro t o-S h i e l d Te c h n o l o g y O n l y Av a i l a b l e o n Ro y a l Li v e C e n t e rs
75
Low-profile head and extended point provide exceptional tool clearance. Note Carbide-tipped point has a slightly different profile.
Body and point are hardened and ground for strength and extended operating life.
Lubricated with lightweight spindle oil instead of grease for reduced turning resistance and lower operating temperatures. A true high-speed live center capable of running at 12,000 rpm all day long!
Bearing life is significantly extended with the exclusive Royal Roto-Shield coolant slinger and a long-life, spring-loaded seal that is resistant to abrasion, high temperatures, and virtually all metalworking fluids.
Three precision angular-contact bearings are secured to the point with a locknut to form a rigid, preloaded assembly. This design is similar to a machine tool spindle cartridge and provides outstanding accuracy and rigidity.
The point extends into the body where it is supported by a needle roller bearing, which further increases rigidity, reduces point deflection, and dampens vibration.
A true high-speed live center up to 12,000 rpm. Lubricated with lightweight spindle oil instead of grease for reduced turning resistance
76
B G
H I F E
Hi g h-P r e s s u r e C o o l a nt Ap p r o v e d
2 MT 3 MT 4 MT 5 MT
B G H
* Maximum recommended operating limit. Operating above this speed could result in heat build-up and accelerated bearing wear.
In s i s t o n Ro t o-S h i e l d Te c h n o l o g y O n l y Av a i l a b l e o n Ro y a l Li v e C e n t e rs
77
Body and point are hardened and ground for strength and durability.
Bearing life is significantly extended with the exclusive Royal Roto-Shield coolant slinger and a long-life, spring-loaded seal that is resistant to abrasion, high temperatures, and virtually all metalworking fluids.
The sturdy, heavy-duty point extends into the shank where it is supported by a large needle roller bearing. This further increases rigidity, reduces point deflection, and dampens vibration. Three oversized precision angular-contact bearings are secured to the point with a locknut to form a rigid, preloaded assembly. This design is similar to a machine tool spindle cartridge and provides outstanding accuracy and rigidity.
Proudly Made in U.S.A.
Designed for turning very large, heavy parts up to 12,000 lbs. Three oversized angular contact bearings and a large needle roller bearing combine to
78
F E
Hi g h-P r e s s u r e C o o l a nt Ap p r o v e d
4 MT 5 MT 6 MT 6 MT
* Maximum recommended operating limit. Operating above this speed could result in heat build-up and accelerated bearing wear.
In s i s t o n Ro t o-S h i e l d Te c h n o l o g y O n l y Av a i l a b l e o n Ro y a l Li v e C e n t e rs
79
Two precision radial ball bearings enable the Value-Turn to achieve high operating speeds. Rear bearing is sealed to protect assembly from coolant and chips. + 0.00005" TIR guaranteed.
Thrust bearing provides great axial load ratings for long operating life.
A sturdy, low-cost center designed for light/medium-duty turning applications. Precision three-bearing design enables the Royal Value-Turn to achieve both high RPMs
80
1 MT 2 MT 3 MT 4 MT 5 MT
* Maximum recommended operating limit. Operating above this speed could result in heat build-up and accelerated bearing wear.
81
Point and body are hardened for wear resistance and long life.
Heavy springs allow the point to slide axially while ensuring that it remains seated in the workpiece center hole. A special thrust bearing handles the axial loads.
Visual reference groove indicates point travel. Neoprene seal protects bearings from contaminants.
Twin needle bearings separated by a steel spacer support the entire length of the rotating point.
Unique spring-loaded point compensates for workpiece thermal expansion. Low-profile design provides outstanding tool clearance. Available with standard and CNC extended points. Can be used in the turret of sub-spindle machines to overcome a lack of
hydraulic compensation.
82
2 MT 3 MT 4 MT 5 MT
1.00 1.25
1.16 1.38
0.55 0.63
0.14 0.18
5,000 4,500
940 1,400
315 435
10526 10527
$338 399
Maximum recommended operating limit. Operating above this speed could result in heat build-up and accelerated bearing wear. Exceeding this value will bottom-out springs.
G H I F
2 MT 3 MT 4 MT 5 MT
1 2
Maximum recommended operating limit. Operating above this speed could result in heat build-up and accelerated bearing wear. Exceeding this value will bottom-out springs.
83
Two precision radial ball bearings give the Versa-Turn high RPM ratings. Both sections of rotating point are guaranteed to + 0.00005" TIR and are -0 ground to an included angle of 60 +15' .
Close-fitting head eliminates contact seal, resulting in an extremely free turning center. Great for thin parts that could bend under high thrust loads when using a stiffer center.
Extended front section of point is used for parts with standard center holes and provides excellent tool clearance. Rear bull-head section of point is great for tubes and parts with large center holes.
Thrust bearing provides high axial load ratings for long operating life.
turning jobs.
The Royal Versa-Turn is extremely free turning, making it an ideal choice for
thin parts that could bend when subjected to high thrust loads.
The unique design is really two centers in one, providing great value for
cost-conscious manufacturers.
84
E xt r e m e l y F r e e Tu r n i n g G r e a t f o r T h i n Pa r ts
F E
2 MT 3 MT 3 MT HD 4 MT 4 MT HD 5 MT
* Maximum recommended operating limit. Operating above this speed could result in heat build-up and accelerated bearing wear.
85
Two matched angular contact bearings for solid thrust and radial load ratings.
Head O.D. is 1 8" larger than nominal size, enabling these centers to cover a wider range of workpieces and eliminating the need to buy the next larger size center.
Steel shield and neoprene seal protect bearing assembly from coolant and chips for extended operating life.
Designed for turning pipes, tubes, and parts with extra-large center holes. Two matched angular contact bearings provide good thrust and radial load ratings. Head diameter is 1 8" over nominal size, enabling these centers to cover a wider
range of workpieces.
86
2 MT 3 MT 4 MT 5 MT 4 MT 5 MT
* Maximum recommended operating limit. Operating above this speed could result in heat build-up and accelerated bearing wear.
87
Two matched angular contact bearings for solid thrust and radial load ratings.
Head O.D. is 1 8" larger than nominal size, enabling these centers to cover a wider range of workpieces and eliminating the need to buy the next larger size center.
Steel shield and neoprene seal protect bearing assembly from coolant and chips for extended operating life. + 0.00005" TIR guaranteed.
Designed for turning pipes, tubes, and parts with extra-large center holes. Two matched angular contact bearings provide good thrust and radial load ratings. Head diameter is 1 8" over nominal size, enabling these centers to cover a wider range
of workpieces.
Bull Head design is shorter than a pipe head, reducing potential interference in blind
center hole applications and ensuring that the load is positioned over the bearings for optimum strength.
Larger Extra Heavy-Duty models up to 12" also available.
88
3 MT 3 MT 4 MT 5 MT 4 MT 5 MT 5 MT 6 MT
* Maximum recommended operating limit. Operating above this speed could result in heat build-up and accelerated bearing wear.
89
*Accuracy is guaranteed to be + 0.00005" TIR as long as the points are installed on the live center to which they have been match-ground. When a customer purchases a new point, we recommend sending the live center back to our factory so we can grind the new point to it. This service is free to Royal customers.
Two precision angular contact bearings help achieve good rpm and load ratings.
Shank, head, and points (except #4 blank point), are hardened for wear resistance and long life.
Precision ground tapers and single-lead threads ensure that points consistently seat in the same location when they are interchanged, providing maximum accuracy.
Steel shield and neoprene seal protect bearing assembly from coolant and chips for extended operating life.
This versatile live center uses interchangeable points to handle many common turning jobs. Each center includes a #3 standard 60 male point. Other points sold separately.
90
2 MT 3 MT 4 MT 5 MT
* Maximum recommended operating limit. Operating above this speed could result in heat build-up and accelerated bearing wear.
1
1. Pipe point for pipe and tubing work. 2. Extra-long male point for additional tool clearance. 3. Standard male point. 4. Blank point made of unhardened 4140 steel. 5. Female point for work not having a center-hole.
POINT
10061 $237 0.882 .38 10062 166 1.00 10063 153 1.00 93 10064 1.00 10065 149 0.251.06
10071 $192 1.383.50 10072 165 1.38 10073 158 1.50 10074 76 1.38 10075 200 0.251.38
10091 $298 10082 205 10083 163 10084 103 10085 188
91
TOOLMAKER'S SET
and the following four points: #1- Bull Head Point #2- Extended Point #3- Standard Point #5- Female Point
All points in the set are ground and serialized to the same live center Additional points available please see previous page.
2 MT 3 MT 4 MT 5 MT
92