Product Description: Aksh 50 micron Multimode Fibre-OM3 Grade supports 10 Gb/s serial transmission over 300m length in the 850nm wavelength range. This 10 Gigabit Ethernet capable laser- optimized fibre provides highest bandwidth performance for premises, Local Area Networks (LAN), Metropolitan Area Networks (MAN), Storage Area Networks (SAN) applications while achieving the lowest overall system cost.
International Standards: Aksh 50 micron Multimode fibre- OM3 Grade complies or exceeds the ISO/IEC 11801(2) as OM3 type or the IEC 60793-2-10 (Type A1a.2) Optical fibre specification. Each fibre is 100% quality measured according to IEC 60793.
Product Specification: Material Properties: Glass Composition Core: Germania (GeO2) doped Silica (SiO2) Cladding: Silica (SiO2) Primary Coating 2 layers of UV curable resin Attenuation Coefficient: At 850 nm < 2.40 dB/km At 1300 nm < 0.60 dB/km At 1383 nm < 2.00 dB/km Point Discontinuity < 0.05 dB Bandwidth vs. wavelength At 850 nm > 1500 MHz.km At 1300 nm > 500 MHz.km
Effective Modal wavelength at 850nm: > 2000 MHz.km
Numerical Aperture: 0.200+0.015
Effective Group Refraction of Index (IOR) At 850nm: 1.483 At 1300nm: 1.478
Environmental Characteristics: Environmental Test Test Condition Induced Attenuation 850 nm & 1300 nm (dB/km) Temperature Dependence -600C to +850C < 0.20 0 0 Water Immersion 23 ± 2 C < 0.20 Heat Aging 850 ± 20C < 0.20 0 Damp Heat 85 C at 85% RH < 0.20
Shipping Information Reel Dimension: Fibre is available with following type of reel. Flange Diameter: 234.9 mm Traverse Width: 95.00 mm Bore Diameter: 25.45 mm Barrel Diameter: 152.4 mm
Reel Length: Max. fibre length: 17.6 km
Length distribution 8.8 km or 17.6 km 100 %
Reel Identification: The label with ID number, barcode of ID number, attenuation at 850 nm and 1300 nm, product code and fibre length shall be attached on each reel.
