MILL TEST CERTIFICATE Jindal Stainless Limited.

(INSPECTION CERTIFICATE) IS 6911

Jajpur,Odisha
In Accordance with EN 10204 :2004 Type 3.1

CM/L-5200020363
a6c926jppMDE4NjUzNzM=
CUSTOMER :STEEL SPACE PVT. LTD. CERTIFICATE NO. :JSL-JRD/QA/2024-25/DOM/01865373
CITY :MUMBAI DATE :08.06.2024
P.O.NO. :1438260_STEELSPACE/037/26-30/30/4/2 PO DATE:30.04.2024 VEHICLE NO. :MH46BM8955
CUSTOMER SPECIFICATION :AS PER OA/PO AGREEMENT SALES ORDER NO. :0558103992
SHIPMENT/DELIVERY NO. :6300152425 NET WT(MT) :7.667

Material Description/Product Grade / Type Material Specifications Process-Route

STAINLESS STEEL 304L/304 ASTM A240/A240M-23A, ASME SA-240/SA-240M 2023 SEC. II, EF-AOD-LRF-CCS
PART A, IS 6911:2017 AMD. 3

PHYSICAL DESCRIPTION
SR BATCH NO. PARENT COIL NO. PKT/PALLET WEIGHT NO. OF HEAT NO. THK WIDTH LENGTH FINISH EDGE QUALITY
NO. / PLATE NO. NO. (MT) PCS (mm) (mm) (mm)
1 500182226 0001044093 241380 1.021 1 40402D04 14.000 1,500.00 6,000.00 N1 Mill Edge PRIME
2 500182227 0001044093 241380 1.022 1 40402D04 14.000 1,500.00 6,000.00 N1 Mill Edge PRIME
3 500182228 0001044093 241380 1.022 1 40402D04 14.000 1,500.00 6,000.00 N1 Mill Edge PRIME
4 X069154302 0001037033 X069154302 4.602 25 12401732 3.000 1,250.00 6,000.00 N1 Mill Edge PRIME

CHEMICAL ANALYSIS (LADLE)

HEAT NO. %C %Mn %S %P %Si %Ni %Cr %N %Mo %Cu %Ti %Nb %Al
40402D04 0.027 1.25 0.002 0.033 0.34 8.00 18.09 0.066 - - - - -
12401732 0.025 1.33 0.002 0.039 0.24 8.03 18.08 0.064 - - - - -

MECHANICAL PROPERTIES:SAMPLE DIRECTION - TRANSVERSE

Sr Rp 0.2/ Rp 1.0 Rm/ %EL %EL %EL Hardness Bend Test
No. YS Mpa TS GL= 50 GL= 80 GL= 5.65 SO HRBW
Mpa Mpa mm mm mm

1 340 - 642 56 - - 80 / 81 -

2 340 - 642 56 - - 80 / 81 -

3 340 - 642 56 - - 80 / 81 -

4 344 - 668 56 - - 83 / 84 -

ADDITIONAL INFORMATION
1)- MATERIAL HAS BEEN SOLUTION ANNEALED AT MIN 1040º C & QUENCHED IN WATER.
2)- ABOVE MATERIAL ALSO CONFIRM TO IS 6911:2017 AMD. 3 GRADE 304L/304.
3)- MATERIALS CONFIRM TO THE REQUIREMENTS AS PER ASTM A480/A480M-23B & ASME SA-480/SA-480M SEC. II PART A-2023.

* THE ABOVE MATERIAL FULLY CONFORMS TO IS 6911:2017 AMD 3 CHEMICAL & MECHANICAL PROPERTIES OF
PRODUCT AS TESTED IN ACCORDANCE WITH THE SCHEME OF TESTING & INSPECTION CONTAINED
IN BIS CERTIFICATION.
HOT ROLLED FINISHES : (BL, ANN, N1, 1D, CHQ) & COLD ROLLED FINISHES: (2E, 2D, 2B, BA, NO.4, HL)
PLATE:- MATERIAL 5.00 MM AND OVER IN THICKNESS AND OVER 250 MM IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS 3 MM OR OVER (AS PER DIN STANDARD)
SHEET:- MATERIAL UNDER 5.00 MM IN THICKNESS AND 600 MM AND OVER IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS LESS THAN 3 MM (AS PER DIN STANDARD)
COIL:- IN "PHYSICAL DESCRIPTION"- LENGTH MENTIONED AS "COIL".

Jindal Stainless Limited, This is hereby certified that the material was manufactured, sampled, tested & inspected in accordance ISO 9001 : 2015
Kalinga Nagar Industrial Complex, with requirements of the material specification and has been found to meet the requirements of order. ISO 14001 : 2015
PO: Danagadi , Jajpur The material supplied under this Test Certificate is free from any radioactive contamination as checked ISO 45001 : 2018
Odisha - 755026, India. by procedures established by Jindal Stainless Limited as per the recommendations provided by AERB. ISO 50001: 2018
TEL :+91-9078899031, IATF 16949 : 2016
FAX :+91-06726-266006 CERTIFIED COMPANY
Email: QualityMTC@jindalstainless.com Format Ref: JSLO/F/QA-CRM/32 Rev.01
Eff Date: 24/09/2021

Any unauthorised usage of this Test Certificate will warrant Legal Action.
1/1