A93230 en

RF Electronics
Compact Electronic Gain Control (EGC) Mini Amplifier Model 93230

Description
The Compact Electronic Gain Control (EGC) Mini Amplifier Model 93230 combines powerful performance with ease of use to meet the growing demands from operators for advanced products. It provides advanced features and benefits to help operators reduce operating costs by streamlining amplifier deployment and configuration and is especially well suited for network upgrades due to increased reverse gain. The mini amplifier performs to 1GHz in the forward path and can be configured electronically, using a handheld programmer terminal for rapid initial set-up or for adjustments that arise as network requirements shift. All settings are done without interrupting service, an especially important capability in networks that are delivering Voice over IP (VoIP) services. Settings for the EGC mini amplifier can be established or modified using a handheld programmer terminal and settings from one amplifier can be uploaded to the handheld programmer terminal for downloading to other amplifiers in order to streamline their configuration. Different forward gain settings (28 dB to 38 dB) can be obtained in the amplifier, enabling it to support several different applications within the network allowing a single amplifier model to help reduce inventory and sparing costs. The number of amplifier plug-ins is reduced to a minimum to help operators keep inventory and costs down. The full range electronic attenuators and equalizers offer improved versatility and make it possible to achieve the same adjustment range as with conventional plug-in or potentiometer solutions. The unit features an easyto-use, electronic input equalizer with built-in cable simulator to help ensure a flat input level to the amplifier. Plug-in diplex filters are used to determine the forward/reverse band split. To meet future demands for more bandwidth, the mini amplifier offers an electronic 862 MHz to 1 GHz fieldprogrammable bandwidth extension, as well as a reverse path that can be upgraded to 200 MHz.
Features

GaAs-FET gain block technology for improved distortion and noise performance Common RF test point for forward output and reverse injections simplify reverse balancing 5 amp power passing Improved output level and flatness Improved surge protection now 6 kV Plug-in, self-contained diplex filters for easy upgrade of reverse path bandwidth Low power consumption

Overview
Low Voltage Lockout Typ 75018-xx Only in 65/90 V types AC Connection Max. 7 A at remote supply Power Supply Fuse 3.15 AT at remote supply 2.0 AT at mains supply Diplex Filter 2 pcs Type 75130-xxxx xxxx is the split freq. If no reverse wanted; Use 0 dB link type 74089 Reverse Equalizer Type 74141-xx Input Test Point -20 dB Bi-directional Fuses (turnable) 6.3 AT Choose AC-pass
-20dB Diplex
Mounting Fittings Distance between holes 168 mm. / 6.6 in. DC-Voltage Indicator LCI Port To setup the amplifier, the handheld terminal can be connected here
93230-138 93230-238
28/38dB 862MHz/1GHz
1
93230-338 93230-938
1
Copy Parameters LCI Port
Eq
Att
Att
Eq Diplex
Output Measure Point, -20 dB directional coupled, can be used as reverse insertion point Reverse Measure Point, -20dB directional coupled
-918dB
018dB
0 6dB
015dB
6.3AT
6.3AT Att
Eq
6
25dB Reverse
Att
-20dB
015dB
018dB
020dB -20dB
mi n. 21mm max.24mm
Service Port For software download

out
in
Service Port
Connector PG11 at input and output Terminal for earthing
Block Diagram
230 V AC
DC DC
Equalizer or Cable simulator -9 to18 dB 0-18 dB
AC or DC in
0-6 dB
0-15 dB
Controller
0-18 dB -20dB TP
Rev.Eq. 0-15 dB
0-20 dB -20dB TP -20dB Rev. TP
IN
OUT 1

Specifications
Forward Performance Frequency range Gain Frequency response Attenuator Equalizer Attenuator, interstage Pre-equalizer, interstage Test point, input, bi-directional Measuring point, output, directional Number of outputs Return loss Noise figure Output level (reference 110 dBV) CTB, EN 50083-3, 4.2.3 CSO, EN 50083-3, 4.2.4 Reverse Performance Frequency range Gain Frequency response Attenuators on input and output Equalizer Measuring point, reverse input, directional Signal injection point, reverse Return loss 3-state reverse switch, EM controlled Noise figure (max. gain, flat output) Output level IMD3 60 dB, EN 50083-5, 3.2 IMD2 60 dB, EN 50083-3, 4.2.2 General Performance Surge protection Enclosure category Emission, EN 50083-2 Screening Connectors, input and outputs (reduction) Test point Electrical 65 V coax line powering (rms, sine) 230 V mains line powering (rms, sine) Power consumption remote powered Power consumption mains powered Max current, inputs and outputs Hum modulation at max. current, EN 50083-3 Max. current, power insertion Environmental Operating temperature range Mechanical Housing dimensions, W x H x D Material Weight Packaging dimensions, H x W x D Units MHz dB dB dB dB dB dB dB dB dB dB dB dB MHz dB dB dB dB dB dB dB dB dB dBV dBV kV, s dBpW 93230-x38 47 862 or 1 GHz 28 38 0.75 ( 1 dB to 1GHz) 0 18 in 0.5 dB step 0 18 in 0.5 dB step 0 6 in 0.5 dB step 0 15 in 0.5 dB step -20 1.5 -20 0.75 1 20 8 7.5 ( 8 to 1GHz) 63 58 63 59 Notes
1
2 2
4 3 5 5 1 2, 6 2, 6
5 - 200 26 0.5, 5 - 65 MHz ( 0,75, 5 - 200 MHz) 0 18 in 0.5 dB step 0 15 in 0.5 dB step -20 0.5 -20 0.5 18 On/-6/Off 7,5, 5 - 65 MHz ( 8.0, 5 - 200 MHz) 120.0, 5 - 65 MHz (115.0, 5 - 200 MHz) 110.0, 5 - 65 MHz (109.0, 5 - 200 MHz) 6, 1.2/50 IP 64 < 20 > 85 PG 11 (5/8) F-connector, Female 24 65 187 250 12 14 5 -65 7 -20 to +55 185 x 145 x 95 Die-cast aluminum 2.2 225 x 225 x 110
2, 4, 6
6 6 2
V AC V AC W W AAC dB A AC C mm kg mm

Specifications, cont.
Notes: 1. Frequency range depends on plug-in diplex filters and amplifier setting 2. Including diplex filter #A75130.106587 3. Max. gain, flat output 45-862MHz 4. At 40 MHz red. 1.5 dB/octave 5. Measured with 6 dB output tilt 6. Including plug-in equalizer 7. A DC voltage supply is possible, 35 - 90 V DC 8. - 55 dB, 5 15 MHz
Ordering Information
Un-configured Amplifier Compact EGC Mini Amplifier, 862 MHz, 28/38 dB gain version, 115 V mains powered Compact EGC Mini Amplifier, 862 MHz, 28/38 dB gain version, 230 V mains powered Compact EGC Mini Amplifier, 862 MHz, 28/38 dB gain version, 24-65 V coax line powered Compact EGC Mini Amplifier, 862 MHz, 28/38 dB gain version, 35-90 V coax line powered Configured Amplifier Compact EGC Mini Amplifier, 862 MHz, 28/38 dB gain version, 230 V mains powered, configured for 65 MHz reverse Compact EGC Mini Amplifier, 862 MHz, 28/38 dB gain version, 24-65 V coax line powered, configured for 65 MHz reverse Please note that some combinations are available on request only. Part Number A93230.10138 A93230.10238 A93230.10338 A93230.10938 A93230.1023865 A93230.1033865
Required Accessories for Compact EGC Mini Amplifier 93230*

The table below contains ordering information for required and optional accessories that are not included as part of an un-configured 93230 amplifier. Please consult your account representative or customer service for ordering assistance. The following Required Accessories must be ordered separately:
Required Accessories Part Number Plug-in Diplex Filter 2 required, xx/yy MHz split A75130.10xxyy Plug-in Reverse Equalizer 1 required xx MHz reverse band A74141.10xx For more information on the above, see the Compact Amplifier and Node Accessories (P/N: A541441) data sheet. * Please note that the required accessories are only relevant for un-configured amplifiers.
Optional Accessories for Compact EGC Mini Amplifier 93230

The following Optional Accessories for coax line powered amplifiers 93230 may be ordered separately:
Optional Accessories Voltage Lock-Out Module, 24 or 35 V * *The 35 V Lock-Out Module is standard with all 90 V Power Supplies. Part Number A75018.00xx
Scientific-Atlanta and the Scientific-Atlanta logo are registered trademarks of Scientific-Atlanta, Inc. ROSA is a trademark of Scientific-Atlanta Europe NV. Specifications and product availability are subject to change without notice. 2006 Scientific-Atlanta, Inc. All rights reserved. Europe & Asia. +45-73-12-21-50 or +49-6173-928-0 http://www.saeurope.com/ North America 1-800-722-2009 or 770-236-6900 www.scientificatlanta.com
Part Number 7009156 Rev A January 2006

A93230 en

Uploaded by

Copyright:

Available Formats

A93230 en

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

A93230 en

Uploaded by

Copyright:

Available Formats

RF Electronics

Compact Electronic Gain Control (EGC) Mini Amplifier Model 93230

Compact Electronic Gain Control (EGC) Mini Amplifier Model 93230

Service Port For software download

Connector PG11 at input and output Terminal for earthing

0-20 dB -20dB TP -20dB Rev. TP

Compact Electronic Gain Control (EGC) Mini Amplifier Model 93230

Compact Electronic Gain Control (EGC) Mini Amplifier Model 93230

Required Accessories for Compact EGC Mini Amplifier 93230*

Optional Accessories for Compact EGC Mini Amplifier 93230

Part Number 7009156 Rev A January 2006

You might also like