Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 4 views

    CN Exp 1

    Uploaded by

    riya kini
    experiment

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CN Exp 1

    Uploaded by

    riya kini
    4 views3 pages
    experiment

    Original Title

    CN_Exp_1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    experiment

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    4 views3 pages

    CN Exp 1

    Uploaded by

    riya kini
    experiment

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Universal College of Engineering, Kaman

    Department of Computer Engineering


    Subject:CN
    Experiment no: 1
    Roll No: 41 Name: Riya Arvind Kini Div: A Batch: A3

    Aim- Use of Crimping Tool for RJ45.


    Theory:-
    Crimping an RJ45 Connector Correctly Proper Wiring for Ethernet Cat5/Cat5e/Cat 6 Cables

    Cables can transmit information along their length. To actually get that information where it
    needs to go, you need to make the right connections to an RJ45 connector. Your cable run needs
    to terminate into a connector, and that connector needs a jack to plug into. Registered Jack 45
    (RJ45) is a standard type of physical connector for network cables. RJ45 connectors are
    commonly seen with Ethernet cables and networks. Modern Ethernet cables feature a small
    plastic plug on each end of the cable. That plug is inserted into
    RJ45 jacks of Ethernet devices. The term “plug” refers to the cable or “male” end of the
    connection while the term “jack” refers to the port or “female” end.

    STEP 1:
    Using a Crimping Tool, trim the end of the cable you're terminating, to ensure that the ends of the
    conducting wires are even.
    Universal College of Engineering, Kaman
    Department of Computer Engineering
    Subject: Computer Network

    STEP 2:
    Being careful not to damage the inner conducting wires, strip off approximately 1 inch of the
    cable's jacket, using a modular crimping tool or a UTP cable stripper.

    STEP 3:
    Separate the 4 twisted wire pairs from each other, and then unwind each pair, so that you end up
    with 8 individual wires. Flatten the wires out as much as possible, since they'll need to be very
    straight for proper insertion into the connector.

    STEP 4:
    Holding the cable with the wire ends facing away from you. Moving from left to right, arrange
    the wires in a flat, side-by-side ribbon formation, placing them in the following order:
    white/orange, solid orange, white/green, solid blue, white/blue, solid green, white/brown, solid
    brown.

    STEP 5:
    Holding the RJ45 connector so that its pins are facing away from you and the plug-clip side is
    facing down, carefully insert the flattened, arranged wires into the connector, pushing through
    until the wire ends emerge from the pins. For strength of connection, also push as much of the
    cable jacket as possible into the connector.
    Universal College of Engineering, Kaman
    Department of Computer Engineering
    Subject: Computer Network

    STEP 7:Insert the prepared connector/cable assembly into the RJ45 slot in your crimping tool.
    Firmly squeeze the crimper's handles together until you can't go any further. Release the handles
    and repeat this step to ensure a proper crimp.

    STEP 8: If your crimper doesn't automatically trim the wire ends upon termination, carefully cut
    wire ends to make them as flush with the connector's surface as possible. The closer the wire
    ends are trimmed, the better your final plug-in connection will be.

    STEP 9: After the first termination is complete, repeat process on the opposite end of your cable

    Conclusion:-Thus, we have studied the use of a crimping tool for RJ-45.

    You might also like