KSB Pumps Arabia, Ltd.

‫ ﺑﻲ اﻟﻌﺮﺑﯿﺔ ﻟﻠﻤﻀﺨﺎت اﻟﻤﺤﺪودة‬، ‫ أس‬، ‫ﺷﺮﻛﺔ ﻛﻲ‬

List of Proposed Materials and Description

Sr. Description QTY.

1 Manufacturer: KSB (France) 1

Application: Wastewater
Hydraulic Data/Pump: 4 L/s @ 10 m
Pumps System: Simplex System
Pump Model: ARX F050-140/023F2USG1-120
Pump Type: Submersible Single Stage
Impeller Design: Free-flow, 44 mm free passage
Materials: Cast iron casing/Stainless steel impeller
Motor: 2.35KW, 3500 RPM, 3PH/380V, IP68
-Installation Kit: Stationary Kit - guide wire arrangement, with its standard accessories
-Control Panel: to run the pumps as 1 Duty, IP54 Enclosure, DOL Starting Method

2651972 (01): ‫ ﻓﺎﻛﺲ‬2652081 – 2651969 – 2652446 (01) : ‫ اﻟﻤﻤﻠﻜﺔ اﻟﻌﺮﺑﯿﺔ اﻟﺴﻌﻮدﯾﺔ – ﺗﻠﻔﻮن‬11554 ‫ اﻟﺮﯾﺎض‬56368 ‫ ب‬. ‫ص‬
P.O.Box. 56368 Riyadh-11554 Saudi Arabia, Tel. (01) 2652081, 2651969, 2652446 Fax.. (01) 2651972
Our technology. Your success.
Pumps Valves Service
n n

Amarex – Submersible Motor Pump

for Handling Waste Water

Applications:
In commercial, industrial and
municipal sectors:
■ Waste water transport

■ Sludge transport

■ Dewatering/water extraction

More information:
www.ksb.com/products

F-max impeller D-max impeller

Amarex – Submersible Motor Pump
for Handling Waste Water

Efficient
■ significant reduction of energy costs by optimised
hydraulic system with F-max impeller
■ new, open dual-vane D-max impeller with top
hydraulic efficiency (“best in class”)
■ high-efficiency motor of efficiency class IE3
■ U-shaped ring on claw for perfect sealing between
pump and duckfoot

Non-clogging
■ free passage of up to 100 mm with F-max
free-flow impeller
■ no clogging by wet wipes with patented D-flector
and D-max impeller

Cost-efficient
■ increased impeller efficiency
■ reduced maintenance work thanks to non-clogging
impellers
■ overall efficiency up to 69 %

2573.025-EN / 11.19 / © KSB SE & Co. KGaA 2019 · Subject to technical modification without prior notice
Durable
■ high operating reliability with optimally selected
motor for continuous duty S1, thermal class H Flexible
■ bearings with long service life (100,000 hours) for ■ wide range of sizes to suit most applications (up to DN
high operating reliability 150, up to 10 kW)
■ long service life with shaft made of corrosion-resistant ■ ideally suited to handling abrasive and aggressive fluids
stainless steel due to wide variety of available material variants
■ optimum material quality of D-max impeller to (e.g. cast chrome steel) and mechanical seals
prevent abrasion (EN GJS-600-3) ■ easy replacement of existing pumps thanks to a large
choice of adapter claws and the replacement pumps app
Environmentally friendly ■ straightforward installation of stationary pump
■ eco-friendly, non-toxic oil fill for lubricating the
mechanical seal (liquid reservoir)
Technical data
■ repairable; two spare part sets per impeller type for
Pump sizes DN 50 to DN 150
all pump sizes
Flow rate Up to 89 l/s / 320 m³/h
■ “Second life” through recyclable components
Head Up to 42 m
Temperature
- Standard (U) Up to 40 °C
- Explosion-proof option (Y) Up to 40 °C
 Material Data Sheets

Technical Submittal - KSB Pumps Arabia Ltd.

Technical Datasheet

Customer Item No.:

Inquiry Date: 24/09/2024 Quotation: 256079
Inquiry No.: Item no.: 100
Quantity: 1 Date: 24/09/2024
Page: 1 / 5

Amarex F 050-140 G1 Version No.: 1

ARX F050-140/023F2USG1-120 /01100S000

Operating point 1 Dimensioning operating point

Operating conditions (purchaser requirements)
Target flow rate 4 l/s Vapour pressure determined -0.9766 bar.r
Target mass flow rate 3.992 kg/s
Minimum allowed ambient -20 °C
Fluid Water temperature
Fluid variant Clean water Maximum allowed ambient 40 °C
Specified fluid temperature 20 °C temperature
Density Fluid handled 998 kg/m³ Installation altitude above sea 1,000 m
Kinematic viscosity Fluid 1 mm²/s level
handled

Operating conditions (performance)

Flow rate 3.999 l/s Maximum power input at duty 1.688 kW
Head 14.9 m point
Shut-off head 20.05 m Maximum power input / curve 1.768 kW
Pump speed 3,459 1/min
Discharge pressure-max. 1.963 bar.r

Design data pump

Scope of supply Pump Pump with stationary Pump directive Non-regulated (NEC)
supplied by KSB installation parts Marking according to Not relevant
Installation code S directive Pump/Valve for
Pump design Close-coupled destination country
Pump system design Single-pump system Explosion protection directive Not relevant
Pump/Valve for destination
Installation depth 4.5 m country
Impeller diameter D2 120 mm
Impeller type Vortex impeller
Free passage 44 mm

Nozzle connections pump

Nominal pressure Suction PN 16 Nominal diameter Discharge DN 50
nozzle nozzle
Nominal pressure Discharge PN 16
nozzle
Discharge flange bolt hole Drawing
pattern as per standard
Technical Datasheet

Customer Item No.:

Inquiry Date: 24/09/2024 Quotation: 256079
Inquiry No.: Item no.: 100
Quantity: 1 Date: 24/09/2024
Page: 2 / 5

Amarex F 050-140 G1 Version No.: 1

ARX F050-140/023F2USG1-120 /01100S000

Shaft sealing
Shaft seal type Double mechanical seal with Mechanical seal type inboard MG1G36
unpressurised buffer fluid Material Shaft seal inboard Q1Q1PGG
(tandem) - T
Mechanical seal type MG1G6
outboard
Material Shaft seal outboard BVPGG

Materials
Design concept G1 Material motor housing EN-GJL-250/A48 CL 35B
Material Volute casing EN-GJL-250/A48 CL 35B Material Power cable sheath PE-C
Material Casing cover EN-GJL-250/A48 CL 35B Material Bolts/Screws A4-70
Material Shaft 1.4021+QT800/20CR13+QT800Hydraulic casing
Material Impeller 1.4517 Material Impeller fastening A4-80
Material Static seal Hydraulic NBR 70 Material Lifting tackle Pump/ 1.4404/A276 TP 316L
casing mixer
Material Inlet part suction-side EN-GJL-250/A48 CL 35B Material Elbow Outlet EN-GJL-250/A48 CL 35B
Material Bearing bracket EN-GJL-250/A48 CL 35B Material Claw, wet installation EN-GJL-250/A48 CL 35B
housing pump-end Material Guide wire 1.4401/A276 TP 316
Technical Datasheet

Customer Item No.:

Inquiry Date: 24/09/2024 Quotation: 256079
Inquiry No.: Item no.: 100
Quantity: 1 Date: 24/09/2024
Page: 3 / 5

Amarex F 050-140 G1 Version No.: 1

ARX F050-140/023F2USG1-120 /01100S000

Driver
Drive concept Electric actuator Rated speed Motor 3,355 1/min
Motor manufacturer KSB Number of motor poles 2
Motor size NG08M Rated power Motor 2.35 kW
Motor version U Motor power reserve 39.2 %
Rolling element bearing type Single-row deep groove ball determined
non-drive end (Basic symbol) bearing 6306 Mains type Motor Three-phs alternating current
Efficiency class Without Rated voltage Motor 380 V
Motor cooling method Surface cooling Dual voltage No
Enclosure Motor IP68 Rated frequency Motor 60Hz
Thermal class 180 (H) nach IEC 60085 Motor starting method Direct
Temperature sensor motor Bimetal switch Motor switching type Star
Operation on a frequency Yes (acc to motor manufact) Rated current Motor 5.28 A
inverter permitted Starting current ratio Ia/In 10
Length Power cable 10 m Cos phi at 4/4 load 0.82
Quantity Power cables 1 Motor efficiency at 4/4 load 83 %
Cable type Power cable H07RN-F Explosion protection directive Without
Cable cross-section Power 7G1,5 Drive
cable Explosion protection directive Not relevant
Quantity Control cables 0 Drive for destination country
Cable type Control cable Without Moisture protection Leakage sensor
Seal Cable gland Resin-sealed, absolutely monitoring Submersible motor
Submersible motor watertight Motor power P1 1.96 kW
P1 at 4/4 load 2.83 kW
Specific energy Flow rate 0.136 kWh/m³
Maximum allowable number 30
of motor starts (per hour)

Installation parts / Accessories Guide wire arrangement Pump (bracket(s) and wire)
Installation type Stationary guide wire Quantity Spacer Guide wire 0
Duckfoot Guidance length 4.5 m
Nominal size Inlet Elbow DN 50 Claw
Nominal size Outlet Elbow DN 50 Claw design straight
Standard Bolt hole pattern EN1092-2 Nominal size Inlet Claw DN 50
Connection Outlet Elbow Nominal size Outlet Claw DN 50
Connection element type Chemical anchors Elbow manufacturer KSB
Foundation
Technical Datasheet

Customer Item No.:

Inquiry Date: 24/09/2024 Quotation: 256079
Inquiry No.: Item no.: 100
Quantity: 1 Date: 24/09/2024
Page: 4 / 5

Amarex F 050-140 G1 Version No.: 1

ARX F050-140/023F2USG1-120 /01100S000

Lifting tackle / Lifting parts

Lifting tackle Pump/mixer Chain
Length Lifting tackle Pump/ 5m
mixer
Maximum load Lifting tackle 200 kg
Pump/mixer
Performance Curve (Pump)

Customer Item No.:

Inquiry Date: 24/09/2024 Quotation: 256079
Inquiry No.: Item no.: 100
Quantity: 1 Date: 24/09/2024
Page: 1 / 1

Amarex F 050-140 G1 Version No.: 1

ARX F050-140/023F2USG1-120 /01100S000

Curve Data
Rated speed Motor 3,355 1/min Efficiency Pump 34.5 %
Density Fluid handled 998 kg/m³ Maximum power input at duty 1.69 kW
Kinematic viscosity Fluid 1 mm²/s point
handled Characteristic curve number K2573-62-50140F/0
Flow rate 4 l/s Impeller diameter D2 120 mm
Target flow rate 4 l/s Hydraulic calculation EN ISO 9906 §4.4.2 (pump
Head 14.9 m according to standard/class input power below 10 kW)
Target head 0m
Installation plan

Customer Item No.:

Inquiry Date: 24/09/2024 Quotation: 256079
Inquiry No.: Item no.: 100
Quantity: 1 Date: 24/09/2024
Page: 1 / 2

Amarex F 050-140 G1 Version No.: 1

ARX F050-140/023F2USG1-120 /01100S000

Drawing is not to scale. Dimensions are given in mm

Motor Connections
Motor manufacturer KSB Nominal diameter Suction nozzle Without
Motor size NG08M Suction flange bolt hole pattern as Without
Rated power Motor 2.35 kW per standard
Number of motor poles 2 Nominal diameter Discharge nozzle DN 50
Rated speed Motor 3,355 1/min Discharge flange bolt hole pattern Drawing
as per standard
Nominal size Outlet Elbow DN 50
Nominal pressure Suction nozzle PN 16
Nominal pressure Discharge nozzle PN 16
Installation plan

Customer Item No.:

Inquiry Date: 24/09/2024 Quotation: 256079
Inquiry No.: Item no.: 100
Quantity: 1 Date: 24/09/2024
Page: 2 / 2

Amarex F 050-140 G1 Version No.: 1

ARX F050-140/023F2USG1-120 /01100S000
Net weight
Connect pipelines stress-free
Total weight Pump 60 kg
Dimensional tolerances for shaft axis height: DIN 747
Weight Installation kit 16.03 kg
Dimensions without tolerances, middle tolerances to: ISO
2768-m Total weight Pump set 76.03 kg
Connection dimensions for pumps: EN735
Dimensions without tolerances - welded parts: ISO 13920-B
Dimensions without tolerances - gray cast iron parts: ISO
8062-CT9