The electromagnetic flow meter, type IZMAG™, is suitable for the
measurement of both the flow rate and the volume of all kinds of liquids, even liquids of minimum conductivity values. The IZMAG™ is completely made of stainless steel. An illuminated display belongs to its standard equipment. The built-in Bluetooth interface allows a wireless communication. Moreover, two pulse outputs and an analog output are available as standard functions. Actions can be controlled by a digital input, e.g. count interruption and zero setting. Its design and the materials used enable the IZMAG™ to meet even the highest hygienic requirements. By default the IZMAG™ is delivered in compact all-in-one design (see the image on the right). A separated version can be optionally Fig.: with an optional welding socket supplied.
Features
The parameters of the flow meter can be set without opening the housing. Quick start and language change offer a simple and user-friendly parameterization. The display and the converter can be turned into different directions, always easy-to-read. Intelligent software enables high measuring dynamics of a span of 1:100. The electronics is permanently monitored by the highly stable electronic “IN-CAL” module. The measurement can be carried out in both flow directions. Its engineering design makes the IZMAG™ piggable in pipe systems according to DIN 11850 R2.
The integrated empty-pipe detection avoids undefined counts.
The liner keeps stable, even in case of a suddenly caused vacuum at high temperatures. The application of adapters makes it possible to use different process connections. Compatible to IZM-S™ and IZM-L™
GEA Diessel GmbH
Steven 1 IZMAG™ D7626-00en Issued: 15.10.2010 / Rev. E 31135 Hildesheim / Germany Tel.: +49 (0)5121-742-0 electromagnetic flow meter Page -1- of -2- Subject to technical change without notice. www.geadiessel.com compact design Observe protection notices ISO 16016! Data Sheet IZMAG™ compact design
Technical Data of the IZMAG™
Supply voltage 9…32 V DC, Electrical power 7 watts/V.A.
100…240 V AC, 50…60 Hz -15% / +10% Protection class IP 67
Materials in contact 1.4404 (AISI 316 L) / PFA Pressure range 0.1…11 bar abs. (PN 10) with the product 1) Housing material 1.4301 (AISI 304) Measuring accuracy ± 0.20% Process connection Aseptic flange Display Graphics LCD, 46 x 23 DIN 11864/2, shape A mm, illuminated Process adapter Welded socket, milk pipe, Pulse output 2x optocoupler (optional) clamp, DIN flange, etc. (volume) 24 V / 20 mA Ambient temperature -25…+55 °C, DC power supply Status output Optocoupler, malfunction -25... +45 °C, AC power supply or direction Product temperature 0…100 °C, Analog output (0)/4…20 mA, 130 °C max. for 30 minutes active or passive; load: 500 Ω max. 2) Minimum conductivity 5 µS/cm min. Control input 9…32 V DC, Ri < 3.2 kΩ of the product Inner diameter According to DIN 11850 R2, Radio Bluetooth ® of the milk pipe piggable communication class 2 1) 2) ±1 mm/s under reference conditions see instruction manual
Steven 1 IZMAG™ D7626-00en Issued: 15.10.2010 / Rev. E 31135 Hildesheim / Germany Tel.: +49 (0)5121-742-0 electromagnetic flow meter Page -2- of -2- Subject to technical change without notice. www.geadiessel.com compact design Observe protection notices ISO 16016! Data Sheet IZMAG™ separated design
Description
The electromagnetic flow meter, type IZMAG™, is suitable for the
measurement of both the flow rate and the volume of all kinds of liquids, even liquids of minimum conductivity values. The IZMAG™ is completely made of stainless steel. An illuminated display belongs to its standard equipment. The built-in Bluetooth interface allows a wireless communication. Moreover, two pulse outputs and an analog output are available as standard functions. Actions can be controlled by a digital input, e.g. count interruption and zero setting. Its design and the materials used enable the IZMAG™ to meet even the highest hygienic requirements. By default the IZMAG™ is delivered in compact all-in-one design. A separated version can be optionally supplied (see the image on the right). Fig.: the IZMAG™ in separated design
Features
The parameters of the flow meter can be set without opening the housing. Quick start and language change offer a simple and user-friendly parameterization. The display and the converter can be turned into different directions, always easy-to-read. Intelligent software enables high measuring dynamics of a span of 1:100. The electronics is permanently monitored by the highly stable electronic “IN-CAL” module. The measurement can be carried out in both flow directions. Its engineering design makes the IZMAG™ piggable in pipe systems according to DIN 11850 R2.
The integrated empty-pipe detection avoids undefined counts.
The liner keeps stable, even in case of a suddenly caused vacuum at high temperatures. The application of adapters makes it possible to use different process connections. Compatible to IZM-S™ and IZM-L™
GEA Diessel GmbH
Steven 1 IZMAG™ D7626-01en Issued: 15.10.2010 / Rev. A 31135 Hildesheim / Germany Tel.: +49 (0)5121-742-0 electromagnetic flow meter Page -1- of -2- Subject to technical change without notice. www.geadiessel.com separated design Observe protection notices ISO 16016! Data Sheet IZMAG™ separated design
Technical Data of the IZMAG™
Supply voltage 9…32 V DC, Electrical power 7 watts/V.A.
100…240 V AC, 50…60 Hz -15% / +10% Protection class IP 67
Materials in contact with 1.4404 (AISI 316 L) / PFA Pressure range 0.1…11 bar abs. (PN 10) the product 1) Housing material 1.4301 (AISI 304) Measuring accuracy ± 0.20% Process connection Aseptic flange Display Graphics LCD, 46 x 23 mm, DIN 11864/2, shape A illuminated Process adapter Welded socket, milk pipe, clamp, Pulse output (volume) 2x optocoupler (optional) DIN flange, etc. 24 V / 20 mA Ambient temperature -25…+55 °C, DC power supply Status output Optocoupler, malfunction or -25... +45 °C, AC power supply direction Product temperature 0…165 °C Interface CS3-BUS / RS485 2) Minimum conductivity of 15 µS/cm min. Control input 9…32 V DC, Ri < 3.2 kΩ the product Inner diameter of the milk According to DIN 11850 R2, Radio communication Bluetooth ® pipe piggable class 2 1) 2) ±1 mm/s under reference conditions see instruction manual
