Single Line Telephone User Guide: Conferencing

Conferencing
Establishing a Conference Call

Repeat for additional parties
Intelligent Hybrid System
RECALL
Extension Number
8
(Talking)
?
Telephone (Talk)
Trunk Code
?
RECALL
u You can repeat this operation to add additional parties. You may be able to have up to 8 parties in total (including your extension).
<press twice>
In the European Union

The symbol depicted here has been affixed to your product in order to inform you that electrical and electronic products should never be disposed of as municipal waste. Electrical and electronic products including the cables, plugs and accessories should be disposed of separately in order to allow proper treatment, recovery and recycling. These products should be taken to a designated facility where the best available treatment, recovery and recycling techniques are available. Separate disposal has significant advantages: valuable materials can be re-used and it prevents the dispersion of unwanted substances into the municipal waste stream. This contributes to the protection of human health and the environment. Please be informed that a fine may be imposed for illegal disposal of electrical and electronic products via the general municipal waste stream. In order to facilitate separate disposal and environmentally sound recycling, NEC Infrontia has made arrangements for local recycling in all member states of the European Union. In case your electrical and electronic products need to be disposed of please refer to the contractual agreements that your company has made upon acquisition of these products. Should this information not be available, please contact us at recycle@necinfrontia.co.uk. For countries outside the European Union Disposal of electrical and electronic products in countries outside the European Union should be done in line with local regulations. If no arrangement has been made with NEC Infrontia or your supplier, please contact the local authorities for further information.
Single Line Telephone User Guide
Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or representation with respect to, any of the equipment covered. This manual is subject to change without notice and NEC Infrontia Ltd has no obligation to provide any updates or corrections to this manual. Further, NEC Infrontia Ltd also reserves the right, without prior notice, to make changes in equipment design or components as it deems appropriate. No representation is made that this manual is complete or accurate in all respects and NEC Infrontia Ltd shall not be liable for any errors or omissions. In no event shall NEC Infrontia Ltd be liable for any incidental or consequential damages in connection with the use of this manual. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied or reproduced without prior written consent of NEC Infrontia Ltd. Copyright 2004 by NEC Infrontia Ltd All Rights Reserved. www.neci.co.uk Issue 1.2 July 2005 991404-5
Before using Your Telephone

Thank you for purchasing the NEC XN120 system.
Due to the flexibility built into the system, your Dialling Codes and Feature Capacities may differ from those in this guide. Check with your Supplier / System Administrator and make a note of any differences.
Forwarding Calls / Do Not Disturb

Do Not Disturb (DND)
8 4 7 1 2 3 4 0
DND : Trunk Incoming Call DND : Intercom Incoming Call DND : Trunk & Intercom Incoming Call DND : Transferred (CFW) Call DND : Cancel
Using Your Telephone

Typical Single Line Telephone is displayed here. This User Guide describes general analogue Single Line Telephone (SLT) procedures. Refer to the User Guide included with to your specific SLT for details on additional key functions.
u When you set DND, the Internal Dial Tone pattern changes.
Handset
Dial Keys Message Lamp
Call Forwarding / Follow Me

CFW Condition Extension Number CFW Type
Ring Key Redial Key Recall Key Volume Control Keys
2 3 4
Busy / No Answer Follow Me Immediate
6 7 0
No Answer Dual Ring Cancel
2 3 4
FWD All Calls FWD Outside Calls only FWD Intercom Calls only
u When you set a Call Forward, the Internal Dial Tone pattern changes.
Call Forward Off-Premise

Telephone Number
To Cancel u When you set a Call Forward, the DND/CONF Keys lamp flashes and the Internal Dial Tone pattern changes.
Answering Calls
Picking up another Extensions Call
In same Group
Placing Calls
Placing an Outside Call
7
Trunk Code Telephone Number
9
In other Groups
9
Extension Number
u Listen for Dial Tone before dialling the Telephone Number.
Pickup for Specified Extension
Placing an Intercom Call

Extension Number
u System programming is required to allow Group Call Pickup. Ask your NEC Authorised Supplier for details.
Hold / Transferring Calls

Placing a Call on Hold / Retrieving a Held Call
Hold RECALL Retrieve RECALL
u Your call will ring or voice-announce. If you hear ringing, wait for an answer. If you hear a beep, begin speaking. Dialling 1 changes voice/ring mode (where the destination is an XN120 Telephone).
Placing Calls Quickly

Abbreviated Dialling <for outside calls>
Common/ Personal Abbv. Common/Personal Abbv. Bin No.
(Talking)
(Dont hang up)
u If you go on hook, the held call will ring back. u This operation puts your call on Exclusive Hold. Other extension users can not take the call off Hold.
Retrieving a Held Outside Call

Trunk No. you want to retrieve
Group Abbv.
Group Abbv. Bin No.
Transferring a Call to another Extension

RECALL Extension Number
u Common/Personal Abbreviated Dialling Bins are numbered as follows (by default): 2-digit dialling: Common = 00-79, Personal = 80-99, or 3-digit dialling: Common = 000-899, Personal = 990-919. u Single Line Telephones cannot store a number into an Abbreviated Dialling Bin. For this you must use an XN120 Display Telephone or PC Programming application. Ask your NEC Authorised Supplier for details. (Announce) u System programming is required to provide Group Abbreviated Dialling. Supplier for details Ask your NEC Authorised
?
(Talking)
Placing Calls Quickly

Last Number Redial <for outside and intercom calls>
If your call doesnt go through

Setting / Answering a Message Waiting Indication
Set
8
(Hear Busy Tone or No Answer)
u Intercom numbers can also be stored under Last Number Redial. (System programming is required. Ask your NEC Authorised Supplier for details.) Answer
Your phones MW Indicator is flashing
If your call doesnt go through

Setting Camp On / Callback / Trunk Queuing
8
(Hear Busy Tone, No Answer, or Trunk Unavailable) <Camp On> Wait without hanging up
u When you set MW, the called partys MW Indicator starts to flash. u When you answer MW, the MW Indicator shall automatically go off when the called party answers.
Cancelling a Message Waiting Indication (at originating extension)

Extension Number you want to cancel MW
8
<Callback> Wait for the system to call you back
Clearing All Message Waiting Indications (at any extension)

8 7 3
u <Camp On> u <Callback>
For Intercom Call, when you hear ringing, wait for the called party to answer. For Trunk Queuing, when you hear Dial Tone, begin dialling the telephone number. For Intercom Call, when your phone starts the ringing, lift handset and wait for the called party to answer. For Trunk Queuing, when your phone starts the ringing, lift handset, hear Dial Tone and begin dialling the telephone number.
u Clear all messages (you have left for other extensions and messages other extensions have left for you).
Cancelling Camp On / Callback / Trunk Queuing

8
(When Camp On set)
Answering Calls
Answering an Outside / Intercom Call
(Ringing) u Each type of incoming call can have its own distinctive ringing pattern. Ask you NEC Authorised Supplier for details.

Single Line Telephone User Guide: Conferencing

Uploaded by

Copyright:

Available Formats

Single Line Telephone User Guide: Conferencing

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Single Line Telephone User Guide: Conferencing

Uploaded by

Copyright:

Available Formats

Conferencing

Establishing a Conference Call

Intelligent Hybrid System

In the European Union

Single Line Telephone User Guide

Before using Your Telephone

Forwarding Calls / Do Not Disturb

Using Your Telephone

Dial Keys Message Lamp

Call Forwarding / Follow Me

Ring Key Redial Key Recall Key Volume Control Keys

Busy / No Answer Follow Me Immediate

No Answer Dual Ring Cancel

Call Forward Off-Premise

u Listen for Dial Tone before dialling the Telephone Number.

Pickup for Specified Extension

Placing an Intercom Call

Hold / Transferring Calls

Placing Calls Quickly

(Dont hang up)

Retrieving a Held Outside Call

Group Abbv. Bin No.

Transferring a Call to another Extension

Placing Calls Quickly

If your call doesnt go through

Your phones MW Indicator is flashing

If your call doesnt go through

Cancelling a Message Waiting Indication (at originating extension)

Clearing All Message Waiting Indications (at any extension)

u <Camp On> u <Callback>

Cancelling Camp On / Callback / Trunk Queuing

You might also like