Ltestng

[ANSWER] question- (answer is in left, question is in right)
Load Testing This is a type of performance testing conducted to evaluate the behavior of a system at increasing
workload. Performance Testing This is a type of software testing that intends to determine how a system performs
in terms of responsiveness and stability under a certain load. Scalability This determines the maximum user load
the software application can handle. Spike Testing This is a type of performance testing conducted to evaluate the
behavior of a system when the load is suddenly and substantially increased. Speed This determines whether the
application responds quickly. Endurance Testing This is a type of performance testing conducted to evaluate the
behavior of a system when a significant workload is given continuously. Stability This determines if the application
is stable under varying loads. at The goal of Performance Testing is to eliminate these. Stress Testing This is a type
of performance testing conducted to evaluate the behavior of a system at or beyond the limits of its anticipated
workload. Software Application's Performance Its response time, reliability, resource usage, and scalability do
matter. TRUE Performance Testing is a subset of FALSE Performance Testing cannot uncover what needs to be
tested and upgraded before the product goes to the market. TRUE Without Performance Testing, software is likely
to suffer from issues such as running slow while several users use it simultaneously. FALSE Application Testing will
determine whether their software meets speed, scalability, and stability requirements under expected workloads.
FALSE Applications sent to market with poor performance metrics due to non-existent or poor are likely to gain
popularity and new niche in the market. TRUE Mission-critical applications like space launch programs or life-saving
medical equipment should be performance tested to ensure that they run for a long period without deviations.
FALSE Only a 1-minute downtime of is estimated to cost the search giant as much as $545,000. TRUE It is estimated
that companies lost sales worth $1100 per second due to a recent FALSE Scability Testing is to check software
application's performance under varying database volumes. FALSE Volume Testing helps plan capacity addition to
the software system. Processor Usage This refers to an amount of time processor spends executing non-idle
threads. thread counts response times Proper loading includes goals and constraints for throughput,
_____________ and resource allocation. It is also necessary to identify project success criteria outside of these
goals and constraints. Throughput This is the rate of a computer or what the network can receive a request per
second. Garbage Collection It has to do with returning unused memory back to the system. Hit Ratios This has to do
with the number ofSQL statements that are handled by cached data instead of expensive I/O operations. Disk Time
This is an amount of time when the disk is busy executing a read or write request. long load time This is normally
the initial time it takes an application to start. Memory Use This refers to the amount of physical memory available
to process on a computer. Response Time Disk Queue Length This is the average number of read and write requests
queued for the selected dis during a sample interval. bottlenecking The key to fixing a ________________ issue is
to find the section of code that is causing the slowdown and try to fix it there. Software Enhancement All are
common activities of performance bottlenecks except one. Private Bytes The number of bytes a process has
allocated that can't be shared among other processes. These are used to measure memory leak and usage.
bottlenecking This is when either coding errors or hardware issues cause a decrease of throughput under certain
loads. response time This should be very quick or else, the user has to wait too long and they lose interest.
Committed Memory The refers to the amount of virtual memory used. Bandwidth This shows the bits per second
used by a network interface. methodology This _____________ adopted for can vary widely but the objective for
performance tests remain the same. network configurations The IT expert should understand the details of the
hardware, software and _________________ used during testing before beginning the testing process. Top Waits
Hard Page Faults An applications health can be measured by the number of threads that are running This referred
to the time from when a user enters a request until the first character These are monitored to determine what wait
times can be cut down when dealing This is when the code that is not from the current working set is called up
from els methodology This _____________ adopted for can vary widely but the objective for performance tests
remain the same. network configurations The IT expert should understand the details of the hardware, software
and _________________ used during testing before beginning the testing process. Top Waits Hard Page Faults
Memory Pages These referred to the number of pages written to or read from the disk in order to resolve hard
Question
Correct
Mark 1.00 out of 1.00
page faults. poor scalability A from this when it cannot handle the expected number of users or when it does not
accommodate a wide enough range of users. security professional Which of the following statements best
describes a white-hat hacker? remote attack Name the attack type when a hacker attempts to attack a host via the
Internet. authentication MAC address spoofing is which type of attack? target of evaluation TRUE Hacking for a
cause is called hacktivism. white-box testing The security, functionality, and ease of use triangle illustrates which
concept? cracker Who uses their hacking skills for destructive purposes? physical access What type of ethical hack
tests access to the physical infrastructure? eCommerce This is a business conducted electronically. yes The
Computer Bus transmits data to different parts of the machine. operating system hyperlink Internet The world's
largest network is the: TRUE The control unit is the part of the processor that interprets the instructions. CPU This is
the brain of the computer. hard drive mouse A pointing device that fits comfortably in the palm of your hand.
keyboard An input device that contains keys you press to enter data into a computer. disgruntled employee Which
type of person poses the greatest threat to an organization's security? LR Controller In the start menu,click All
Program-HP software-HP LoaderRunner-Controller to open the . Separate command Verify that a window opens
the following message Apache Web Server If the is not running click start-all programs-HP Software-HP
LoadRunner-Samples-Web-Start HP Web tours Serve Pacing The time to wait before repeating the action. Window
Task Bar In verify that the Apache web server is running . Stress testing It is performed to find the upper limit
capacity of the system and also to determine how the system performs if the current load goes well above the
expected maximum. Load testing It is the simplest form of testing conducted to understand the Soak testing Also
known as endurance testing is performed to determine the system parameters under continuous expected load.
Spike testing Performed by increasing the number of users suddenly by a very large amount and measuring the
performance of the system. Performance testing Measures the quality attributes of the system, such as scalability,
reliability and resource usage. Standalone Applications Enables you to run standalone installations of the following
applications: Analysis, Load Generator, MI Listener, Monitors Over Firewall, and Virtual User Generator (VuGen).
Content Check For automatically detecting user-defined errors. IDE Add-ins Installs a component that enables you
to create and run scripts, written in your standard development environment, in the application's native language.
Think Time The time the user stops to think between steps. Vusers Quantity Provide the desired Service Test Add-in
Enables you to run VuGen with all of the HP Service Test capabilities. SiteScope Installs the SiteScope server used
for the Siebel Web Server, SAP CCMS, SAP Portal, and Server Resource monitors Speed Simulation Users using
different network connections such as modem, DSL, and cable. Log The level of information that you want to gather
during the test. HP Performance Validation SDK Provides you with the tools to create a custom protocol to run load
tests on a previously unsupported application. Run Logic The number of times a user repeats a set of actions.
Change Scenario group name Select the script and click the Browser Emulation Users using different browsers to
see their application’s performance. Locate the desired script Navigate to find out that that our desired script basic
script in this case appears in the Group Name column of the Scenario Groups pane. correct performance tests
functional API tests ______________are the equivalent of unit tests for software. developers load tests API
performance tests can be divided into two: functional and _______________. same results When the deployment
works, the tests should return the ____________ everywhe API Load Tests virtual users equivalent system Load API
tests, on the other hand, typically run in production or an ____________ functional API tests It's recommended to
run them to verify that deployment doesn't break functionality shorter than testing, monitoring API Monitoring
Soak Testing stress testing peak test hese are the times during which you expect a higher load. URL/API Test
increase UAT tests This is testing by the actual users. server memory or disk space starts The correct answer is: APIs
should be functionally ____________, as well as available, fast, secure and Most API tests also fall under the
umbrella term “__________________” because For _____________, API testing is essential not just for making
promises to custo This is because non-functional constraints such as reliability and responsiveness Every load test
works with _____________, typically abbreviated to VU, which sim A peak test is typically _____________ a soak
Question
Correct
test and often includes ramping up _____________ is done as part of the development, build and deploy process;
__ ______________ typically includes simple uptime checks as well as performance The idea behind
______________ is that sometimes a system seems to perform a The idea behind this testing approach is to
continuously grow the load to find the p To set up an function endpoint test in BlazeMeter you can click the button
under The idea behind Spike Testing is to _______________ the load in short bursts, mu Running out of
______________ due to leaks or not cleaning up logs etc. is a com The ramp-up ___________ with a single user and
grows linearly until reaching the To set up an function endpoint test in BlazeMeter you can click the button under
Analyzing Run Results and Reporting Defects Stage 6 GUI Testing Workflow Automated Testing To verify if the AUT
performs the designated tasks, you automate a series of tests that run without human intervention. Community
Area It Click the Community button to open news about UFT GUI Testing. comprehensive Benefits of Automated
Testing where you can build a suite of tests that covers eve feature in your Web site or application. Default It is a
normal object based recording mode for UFT recording sessions. Fast Benefits of Automated Testing where
automated tests are significantly faster than human users. Flight Reservation It is a windows- based application.
Functional Testing Enables you to verify the following features of Application Under test in-platform prompt If a test
for a desktop or web app is to be performed, users select the proper settings on an _________________ and begin
the test by hitting the Record butto Insight Recording Recognizes objects based on their appearance rather than
their native properties interactive The platform will automatically record any ______________ or keyword-based
on screen actions and commands undertaken by the user. Item Refers to the object in the AUT that was interacted
with. Links Area It Click the Links button to open links to the UFT for GUI Testing Help. Low level recording Records
additional detail into some steps, such as the coordinates of a mouse clic on an object so that UFT may use that
additional data. Manual Testing To verify if the AUT performs the designated tasks, you manually execute a series
of tests. Mercury Tours It is a browsers-based application. mobile app If a test for a ________________is selected,
HPE Unified Functional Testing allow users to install or push their developed mobile apps to real Android, iOS or
Windows devices and interact with both the device and the app from within the platform. Operation Refers to the
action that you perform on the object during the recording session. This is also called the method. Options Expands
or collapses the dialog box to show the Results Location and Input Parameters tabs. platform The ______________
allows for both keyword-driven and objectbased automated functional testing commands, but also provides
manual scripting tools for users w want a more hands-on approach. Preparing the Testing Infrastructure Stage 2 of
GUI Testing Workflow Programmable Benefits of Automated Testing where you can program sophisticated tests
that brin out hidden information Recent Test/Components and Recent Solutions Enables you to create a test or
component or a solution by clicking the New or Open buttons after selecting a test, component or solution name.
Recent Test/Components and Recent Solutions Enables you to create a test or component or a solution by clicking
the New or Open buttons after selecting a test, component or solution name Reliable Tests perform precisely the
same operations each time they are run, thereby eliminating human error Repeatable Benefits of Automated
testing where you can test how the Web site or application reacts after repeated execution of the same operations
Results Location The target location for the results, as specified in the Results Location tab. Run Begins the run
sessions Support Area It Click the Support button to open links to UFT for GUI Testing support Test Name The test
or component to run. You can select any open item from the drop- down list. test script To create a new
_______________, users open a new project and select what typ of app (Windows desktop, mobile or web) the test
is to be performed on. Value Refers to data that you specify for the operation performed on the object. FALSE
Community Links is the community button to open news about UFT GUI Testing. FALSE UFT stands for Unitied
Functinal Testing. FALSE Mercury Tools is a browsers-based application. FALSE Operation refers to data that you
specify for the operation performed on the object FALSE Various Name is the test or component to run. FALSE
Comprehension can build a suite of tests that covers every feature in your Web si or application. FALSE Manual
Testing enables you to verify the following features of Application Under test. FALSE Low Recording recognizes
Question
Correct
objects based on their appearance rather than their native properties. FALSE Data driven functionally without
which users could not operate. FALSE Jenkins is a tool that evaluates the functionality and load performance of any
created or deployed APIs present in the app being tested. FALSE Low Recording recognizes objects based on their
appearance rather than their native properties FALSE HPE has the hardware which functions using an interactive,
visual system and let developers and testers view, manipulate, and assess the application's graphical user interface.
FALSE There is a manual script writing involved when creating automated test(s) using UFT from HPE TRUE Links
Area is the Links button to open links to the UFT for GUI Testing Help. Low level recording Records additional detail
into some steps, such as the coordinates of a mouse clic on an object so that UFT may use that additional data.
Manual Testing To verify if the AUT performs the designated tasks, you manually execute a series of tests. Mercury
Tours It is a browsers-based application. mobile app If a test for a ________________is selected, HPE Unified
Functional Testing allow users to install or push their developed mobile apps to real Android, iOS or Windows
devices and interact with both the device and the app from within the platform. Operation Refers to the action that
you perform on the object during the recording session. This is also called the method. Options Expands or
collapses the dialog box to show the Results Location and Input Parameters tabs. platform The ______________
allows for both keyword-driven and objectbased automated functional testing commands, but also provides
manual scripting tools for users w want a more hands-on approach. Preparing the Testing Infrastructure Stage 2 of
GUI Testing Workflow Programmable Benefits of Automated Testing where you can program sophisticated tests
that brin out hidden information Recent Test/Components and Recent Solutions Enables you to create a test or
component or a solution by clicking the New or Open buttons after selecting a test, component or solution name.
Recent Test/Components and Recent Solutions Enables you to create a test or component or a solution by clicking
the New or Open buttons after selecting a test, component or solution name Reliable Tests perform precisely the
same operations each time they are run, thereby eliminating human error Repeatable Benefits of Automated
testing where you can test how the Web site or application reacts after repeated execution of the same operations
Results Location The target location for the results, as specified in the Results Location tab. Run Begins the run
sessions Support Area It Click the Support button to open links to UFT for GUI Testing support Test Name The test
or component to run. You can select any open item from the drop- down list. test script To create a new
_______________, users open a new project and select what typ of app (Windows desktop, mobile or web) the test
is to be performed on. Value Refers to data that you specify for the operation performed on the object. FALSE
Community Links is the community button to open news about UFT GUI Testing. FALSE UFT stands for Unitied
Functinal Testing. FALSE Mercury Tools is a browsers-based application. FALSE Operation refers to data that you
specify for the operation performed on the object FALSE Various Name is the test or component to run. FALSE
Comprehension can build a suite of tests that covers every feature in your Web si or application. FALSE Manual
Testing enables you to verify the following features of Application Under test. FALSE Low Recording recognizes
objects based on their appearance rather than their native properties. FALSE Data driven functionally without
which users could not operate. FALSE Jenkins is a tool that evaluates the functionality and load performance of any
created or deployed APIs present in the app being tested. FALSE Low Recording recognizes objects based on their
appearance rather than their native properties FALSE HPE has the hardware which functions using an interactive,
visual system and let developers and testers view, manipulate, and assess the application's graphical user interface.
FALSE There is a manual script writing involved when creating automated test(s) using UFT from HPE TRUE Links
Area is the Links button to open links to the UFT for GUI Testing Help. TRUE Item refers to the object in the AUT
that was interacted with. TRUE Dynamic Content is the process of unique identifiers. TRUE Automated testing is to
verify if the AUT performs the designated tasks, you automate a series of tests that run without human
intervention. TRUE Default is a normal object based recording mode for UFT recording sessions TRUE The UFT
platform from HPE allows users to create and execute automated functionality and performance tests on native
and cross-platform mobile apps developed for Android, iOS, and Windows devices. TRUE The HPE Unified
Question
Correct
Functional Testing tool offers integration with Jenkins and other HPE and third-party app development tools such as
HP Quality Center and HPE Application Lifecycle Management suite. Dialog Box Enables you to associate one or
more shared object repositories with one or more actions in a test. Distance and hierarchy Enables you to define
related objects according to their distance or hierarchical location relative to the object to identify. External It is a
reusable action stored with another test. Global sheet Global Sheet enables you to insert data that applies only to
that action. HP Unified Functional Testing software features various important legacy products such as QuickTest
Professional, WinRunner, and HP Service Test. Micro Focus UnifiedFunctional Testing __________ enables
functional tests to be carried out automatically to increase th speed and cost effectiveness of application
development and delivery. Nested An action inside another action. None of the choices It is one that can be called
multiple times by the local test. Object Details area (Checkpoint Objects) Enables you to view the properties of a
checkpoint object, the same way as you d in the relevant Checkpoint Properties dialog box. Object Repository
Manager dialog box Enables you to open multiple shared object repositories and modify them as required. Objects
Details area(Output Value Objects) Enables you to view the properties of an output value object, the same way as
you do in the relevant Checkpoint Properties dialog box. operating systems The platform is best suited for
organizations that intend to develop and launch one or more complex desktop, mobile, or web applications
intended for use on a varie of devices and Preview Highlights the visual relation between all related objects and the
objects matching the test object to identify (main UFT window is hidden). quality assurance The Unified Functional
Testing platform from HPE is suitable for use by development, testing and ______ individuals and teams due to its
range of automated functionality and performance testing tools. Relation details The details of the visual relation
for the selected related object. Test Object Image area(Insight Test Objects) Displays the image that UFT for GUI
Testing uses to identify the object in the application. Test Object to Identify The name of the test object as it
appears in the object repository (read-only). Test with Multiple Actions An action can be divided into logical
sections such as the Login process, Create New Order process, and Logoff process. windows-based machines The
HPE Unified Functional Testing platform is available as on-premises software (for _______) or as software as a
service available for use on today's most popular web browsers FALSE The Object Management area enables you to
view the properties and property values used to identify a test object during a run session FALSE Checkpoints do
not need to be managed in single tests. FALSE You can use only one shared object repositories Test with Multiple
Actions act o ca be d ded to og ca sect o s suc as t e og p ocess, C eate New Order process, and Logoff process.
windows-based machines The HPE Unified Functional Testing platform is available as on-premises software (for
_______) or as software as a service available for use on today's most popula web browsers FALSE The Object
Management area enables you to view the properties and property values used to identify a test object during a
run session FALSE Checkpoints do not need to be managed in single tests. FALSE You can use only one shared
object repositories. FALSE There is a manual script writing involved when creating automated test(s) using UFT from
HPE. FALSE After creating tests, you must determine exactly what you want to test in your application FALSE The
Browser Navigation Timeout allows 90 seconds for a page to load by default. FALSE During your test creation, you
must determine exactly what you want to test in you application. FALSE A Web design uses Web classes and Web
object. FALSE Double Action Test is an action in UFT for GUI Testing refers to a set of steps that are run as a group.
FALSE The Object Repository System enables you to open multiple shared object repositories and modify them as
needed FALSE Multiple shared object repositories can store in data sheets. TRUE Optional Filter properties is the
other properties that can help identify objects of a particular class. TRUE Before you begin creating tests, you must
determine exactly what you want to test in your application. TRUE After a test is recorded, run the test to verify the
test results. TRUE Captured Data is a still image of the state of your application at a particular step. TRUE You can
also merge objects from the local object repository directly to a shared object repository that is associated with the
same action or component. TRUE When the Web add-in is loaded, the Test Settings displays a Web tab. TRUE Result
Details is a high-level results overview report, containing general informatio about the test. TRUE Non-reusable
Question
Correct
action is one that can be called only in the local test. TRUE During your regular working process, you can add
checkpoints to any test. TRUE A Web application generally uses a greater variety of objects as compared to a
Windows-based application. TRUE Use a shared object repository, when: You are creating tests or components
using keyworddriven methodologies (not by recording) TRUE You can use the shared object repository for multiple
tests. TRUE When you open an object repository, it opens in a read-only format by default. TRUE You can open as
many shared object repositories as you want. TRUE Reusable action is one that can be called multiple times by the
local test. TRUE Before a record session is initiated, you must set the record and run settings for th Web application
that you want to test. Add Enables you to define a new internal environment variable and add it to the list. All of
the choices To update an object, perform the following steps: Creation Time This is the identifier that applicable
only to web applications. Database Checkpoint It checks the contents of a data based accessed by an application.
File The environment variable xml file to load and use when your test runs. Index This is the identifier that indicates
the order which the order appears in the application code. Input Parameter Names and their values are located in
the Data Table. It is a reusable action stored with another test. It is a reusable action stored with another test. Java
Checkpoints include the following type EXCEPT. Links Area ItClick the Links button to open links to the UFT for GUI
Testing Help. Location This is the identifier which object appears within the frameor dialog box. None of the choices
The most fundamental properties of a particular test object class. None of the choices Indicates that the value of
the property is currently an environment variable parameter. None of the choices Indicates that the value of the
property is currently a parameter. None of the choices It is a checkpoint that can check for any value generated at
run time. Objects Details area(Output Value Objects) Enables you to view the properties of an output value object,
the same way as you do in the relevant Checkpoint Properties dialog box Output Parameter It is a value of a
property capturedfrom thethe AUT during the test execution. Plus It matches one to any number of occurrences of
the preceding character. Preview Highlights the visual relation between all related objects and the objects matching
the test object to identify (main UFT window is hidden) FALSE The Object Management area enables you to view
the properties and property values used to identify a test object during a run session. FALSE The Object Repository
System enables you to open multiple shared object repositories and modify them as needed. FALSE Class is the
selected name of the selected object. FALSE Test object name is the test object class of the selected object. FALSE
You can notdelete objects from the object repository. FALSE Property name enables you to specify the property
valuefor which UFT for GUI Testing should wait before continuing to the next step in the test. FALSE
Comprehensioncan build a suite of tests that covers every feature in your Web sit or application FALSE
Comprehensioncan build a suite of tests that covers every feature in your Web sit or application. FALSE Global
Sheet enables you to insert data that applies only to that action. FALSE Double Action Test is anaction in UFT for
GUI Testing refers to a set of steps that are run as a group. FALSE Accessibility checkpoint identifies area of a web
site to check for section 598 compliancy. FALSE Table checkpoint checks the property values of an image FALSE File
content checkpoint check the image in a document generated during a run session. FALSE Text checkpoints thetext
string is displayed within a defined area in a window base application according to specified criteria. FALSE Various
Nameis the test or component to run. TRUE You can also merge objects from the local object repository directly to
a shared object repository that is associated with the same action or component TRUE Use a shared object
repository, when: You are creating tests or components using keyword-driven methodologies (not by recording).
TRUE You can add an object to the object repository directly from the Object Spy. TRUE You can insert a
synchronization point that instructs the tool to wait until the Upda Order button's enabled property equals. TRUE
When you run a test, your application might not always respond with the same speed. TRUE All test objects are
stored in the object repository. TRUE You can insert a synchronization point, which instructs the UFT for GUI Testing
too TRUE Base Filter propertiesis the most fundamental properties of a particular test object class. TRUE
Synchronization is used to instruct UFT for GUI Testing to wait for the application process to complete before
proceeding to the next step in the test. TRUE You can modify the default amount of time that the UFT for GUI
Question
Correct
Testing tool waits for a Web page to load. TRUE You can insert Exist or Wait statements that instruct the UFT for
GUI Testing tool to wait until an object exists or to wait a specified amount of time before continuing the test. TRUE
You can insert a synchronization point that instructs the UFT for GUI Testing tool to wait until the Update Order
button is enabled. TRUE Item refers tothe object in the AUT that was interacted with. TRUE When a local data sheet
is used, values specific to an action appear in the action data sheets that are available to that action only. TRUE
Result Detailsis a high-level results overview report, containing general information about the test. TRUE Reusable
action is onethat can be called multiple times by the local test. TRUE XML checkpointchecks the data content of
XML documents. TRUE Special character Period in UFT matches any single character. TRUE Page checkpoint checks
the characteristics of a web page TRUE Brackets matches a range of character. TRUE Checkpoints can be inserted
even while you are in recording mode. TRUE You can check the object property values in your application using
standard checkpoints. FALSE Double Action Test is an action in UFT for GUI Testing refers to a set of steps that are
run as a group. TRUE You can use the shared object repository for multiple tests TRUE When a local data sheet is
used, values specific to an action appear in the action data sheets that are available to that action only TRUE Before
you begin creating tests, you must determine exactly what you want to test in your application Bottlenecks The goal
of Performance Testing is to eliminate these. Endurance Testing This is a type of performance testing conducted to
evaluate the behavior of a system when a significant workload is given continuously. Load Testing This is a type of
performance testing conducted to evaluate the behavior of a system at increasing workload. Performance Testing
This is a type of software testing that intends to determine how a system performs in terms of responsiveness and
stability under a certain load. Scalability This determines the maximum user load the software application can
handle. Software Application's Performance Its response time, reliability, resource usage, and scalability do matter.
Speed This determines whether the application responds quickly. Spike Testing This is a type of performance testing
conducted to evaluate the behavior of a system when the load is suddenly and substantially increased. Stability This
determines if the application is stable under varying loads. Stress Testing This is a type of performance testing
conducted to evaluate the behavior of a system at or beyond the limits of its anticipated workload. FALSE
Performance Testing cannot uncover what needs to be tested and upgraded before the product goes to the
market. FALSE Application Testing will determine whether their software meets speed, scalability, and stability
requirements under expected workloads. FALSE Applications sent to market with poor performance metrics due to
non-existent or poor are likely to gain popularity and new niche in the market. FALSE Only a 1-minute downtime of
is estimated to cost the search giant as much as $545,000. FALSE Scability Testing is to check software application's
performance under varying database volumes. FALSE Volume Testing helps plan capacity addition to the software
system. FALSE Text checkpoints the text string is displayed within a defined area in a window based application
according to specified criteria FALSE You can not delete objects from the object repository. FALSE Test object name
is the test object class of the selected object FALSE Property name enables you to specify the property value for
which UFT for GUI Testing should wait before continuing to the next step in the test. FALSE A Web design uses Web
classes and Web object TRUE Performance Testing is a subset of TRUE Without Performance Testing, software is
likely to suffer from issues such as running slow while several users use it simultaneously. TRUE Mission-critical
applications like space launch programs or life-saving medical equipment should be performance tested to ensure
that they run for a long period without deviations. TRUE It is estimated that companies lost sales worth $1100 per
second due to a recent TRUE XML checkpoint checks the data content of XML documents. TRUE Page checkpoint
checks the characteristics of a web page. TRUE Base Filter properties is the most fundamental properties of a
particular test object class. TRUE You can insert a synchronization point, which instructs the UFT for GUI Testing
tool to pause the test until an object property achieves the value you specify TRUE Reusable action is one that can
be called multiple times by the local test. TRUE Result Details is a high-level results overview report, containing
general information about the test. Apache Web Server If the is not running click start-all programs-HP Software-HP
LoadRunner-Samples- Web-Start HP Web tours Server. Load testing It is the simplest form of testing conducted to
Question
Correct
understand the LR Controller In the start menu,click All Program-HP software-HP LoaderRunner-Controller to open
the . Output Parameter It is a value of a property captured from the the AUT during the test execution. Pacing The
time to wait before repeating the action. Performance testing Measures the quality attributes of the system, such
as scalability, reliability and resource usage. Separate command Verify that a window opens the following message
Soak testing Also known as endurance testing is performed to determine the system parameters under continuous
expected load. Spike testing Performed by increasing the number of users suddenly by a very large amount and
measuring the performance of the system. Stress testing It is performed to find the upper limit capacity of the
system and also to determine how the system performs if the current load goes well above the expected maximum.
Window Task Bar In verify that the Apache web server is running . Top Waits methodology This _____________
adopted for performance testing can vary widely but the objective for performance tests remain the same. poor
scalability A from this when it cannot handle the expected number of users or when it does not accommodate a
wide enough range of users. Top Waits These are monitored to determine what wait times can be cut down when
dealing with the how fast data is retrieved from memory. thread counts An applications health can be measured by
the number of threads that are runnin and currently active. Hard Page Faults This is when the code that is not from
the current working set is called up from elsewhere and retrieved from a disk. response time This should be very
quick or else, the user has to wait too long and they lose interest. Response Time Garbage Collection It has to do
with returning unused memory back to the system. Hard Page Faults Memory Pages These referred to the number
of pages written to or read from the disk in order to resolve hard page faults. Disk Queue Length This is the average
number of read and write requests queued for the selected dis during a sample interval. FALSE Various Name is the
test or component to run.
Links Area is the Links button to open links to the UFT for GUI Testing
True
Help.
Community Links is the community button to open news about UFT GUI
False
Testing.
Stage 2 of GUI Testing Workflow Preparing the Testing Infrastructure
It is a windows- based application. Flight Reservation
Tests perform precisely the same operations each time they are run,
Reliable
thereby eliminating human error
Benefits of Automated Testing where automated tests are significantly
Fast
faster than human users.
It Click the Links button to open links to the UFT for GUI Testing Help. Links Area
It Click the Community button to open news about UFT GUI Testing. Community Area
To verify if the AUT performs the designated tasks, you manually
Manual Testing
execute a series of tests.
Enables you to verify the following features of Application Under test Functional Testing
Benefits of Automated testing where you can test how the Web site or
Repeatable
application reacts after repeated execution of the same operations
To verify if the AUT performs the designated tasks, you automate a
Automated Testing
series of tests that run without human intervention.
UFT stands for Unitied Functinal Testing. False
Stage 6 GUI Testing Workflow Analyzing Run Results and Reporting Defects
Mercury Tools is a browsers-based application. False
Benefits of Automated Testing where you can build a suite of tests that
comprehensive
covers every feature in your Web site or application.
It is a browsers-based application. Mercury Tours
Benefits of Automated Testing where you can program sophisticated
Programmable
tests that bring out hidden information
Enables you to create a test or component or a solution by clicking the
Recent Test/Components and Recent
New or Open buttons after selecting a test, component or solution
Solutions
name.
It Click the Support button to open links to UFT for GUI Testing support Support Area
Refers to the action that you perform on the object during the recording
Operation
session. This is also called the method.
Question
Correct
Operation refers to data that you specify for the operation performed on
False
the object.
Various Name is the test or component to run. False
Item refers to the object in the AUT that was interacted with. True
Dynamic Content is the process of unique identifiers. True
Records additional detail into some steps, such as the coordinates of a
Low level recording
mouse click on an object so that UFT may use that additional data.
Comprehension can build a suite of tests that covers every feature in
False
your Web site or application.
The test or component to run. You can select any open item from the
Test Name
drop- down list.
The target location for the results, as specified in the Results Location
Results Location
tab.
Begins the run sessions Run
Manual Testing enables you to verify the following features of
False
Application Under test.
Expands or collapses the dialog box to show the Results Location and
Options
Input Parameters tabs.
Refers to the object in the AUT that was interacted with. Item
It is a normal object based recording mode for UFT recording sessions. Default
Automated testing is to verify if the AUT performs the designated tasks,
True
you automate a series of tests that run without human intervention.
Low Recording recognizes objects based on their appearance rather
False
than their native properties.
Refers to data that you specify for the operation performed on the
Value
object.
Default is a normal object based recording mode for UFT recording
True
sessions
Recognizes objects based on their appearance rather than their native
Insight Recording
properties.
Data driven functionally without which users could not operate. False
Options
Benefits of Automated Testing where you can program sophisticated
Programmable
tests that bring out hidden information
Match the missing word/details to its corresponding statement
If a test for a desktop or web app is to be performed, users select the
proper settings on an _________________ and begin the test by hitting in-platform prompt
the Record button
The platform will automatically record any ______________ or
keyword-based on-screen actions and commands undertaken by the interactive
user.
The ______________ allows for both keyword-driven and objectbased
automated functional testing commands, but also provides manual platform
scripting tools for users who want a more hands-on approach.
To create a new _______________, users open a new project and
select what type of app (Windows desktop, mobile or web) the test is to test script
be performed on.
If a test for a ________________is selected, HPE Unified Functional
Testing allows users to install or push their developed mobile apps to
mobile app
real Android, iOS or Windows devices and interact with both the device
and the app from within the platform.
The target location for the results, as specified in the Results Location
Results Location
tab.
It is a windows- based application. Flight Reservation
Jenkins is a tool that evaluates the functionality and load performance
False
of any created or deployed APIs present in the app being tested.
True
The test or component to run. You can select any open item from the
Test Name
drop- down list.
Question
Correct
It Click the Community button to open news about UFT GUI Testing. Community Area
To verify if the AUT performs the designated tasks, you automate a
Automated Testing
series of tests that run without human intervention.
Value
object.
Repeatable
The UFT platform from HPE allows users to create and execute
automated functionality and performance tests on native and cross-
True
platform mobile apps developed for Android, iOS, and Windows
devices.
Recent Test/Components and Recent
New or Open buttons after selecting a test, component or solution
Solutions
name
False
than their native properties
HPE has the hardware which functions using an interactive, visual
system and lets developers and testers view, manipulate, and assess False
the application's graphical user interface.
Reliable
Low level recording
Stage 2 of GUI Testing Workflow Preparing the Testing Infrastructure
There is a manual script writing involved when creating automated
False
test(s) using UFT from HPE
Insight Recording
properties.
comprehensive
Operation
False
Links Area is the Links button to open links to the UFT for GUI Testing
True
Help.
Various Name is the test or component to run. False
Fast
Mercury Tools is a browsers-based application. False
The HPE Unified Functional Testing tool offers integration with Jenkins
and other HPE and third-party app development tools such as HP True
Quality Center and HPE Application Lifecycle Management suite.
True
sessions
It is a normal object based recording mode for UFT recording sessions. Default
False
the object.
False
False
Testing.
Question
Correct
The Object Management area enables you to view the properties and
False
property values used to identify a test object during a run session.
The Object Repository System enables you to open multiple shared
object repositories and modify them as needed.
False
You can also merge objects from the local object repository directly to a
shared object repository that is associated with the same action or True
component
Enables you to associate one or more shared object repositories with Dialog Box
one or more actions in a test.
Displays the image that UFT for GUI Testing uses to identify the object Test Object Image area(Insight Test Objects)
in the application.
You can use only one shared object repositories.

False
Enables you to view the properties of an output value object, the same Objects Details area(Output Value Objects)
way as you do in the relevant Checkpoint Properties dialog box
The details of the visual relation for the selected related object. Relation details
When you open an object repository, it opens in a read-only format by

default.
True
Highlights the visual relation between all related objects and the objects
Preview
matching the test object to identify (main UFT window is hidden)
The name of the test object as it appears in the object repository (read- Test Object to Identify
only).
Multiple shared object repositories can store in data sheets. False

Use a shared object repository, when: You are creating tests or
True
components using keyword-driven methodologies (not by recording).
Enables you to view the properties of a checkpoint object, the same Object Details area (Checkpoint Objects)
way as you do in the relevant Checkpoint Properties dialog box.
Enables you to open multiple shared object repositories and modify

Object Repository Manager dialog box
them as required.

Enables you to define related objects according to their distance or Distance and hierarchy
hierarchical location relative to the object to identify.
Before you begin creating tests, you must determine exactly what you
True
want to test in your application.
During your test creation, you must determine exactly what you want to
False
test in your application.
You can use the shared object repository for multiple tests. True
Class is the selected name of the selected object. False
You can add an object to the object repository directly from the Object
True
Spy.
You can insert a synchronization point that instructs the tool to wait until
True
the Update Order button's enabled property equals.
This is the identifier that applicable only to web applications. Creation Time
Question
Correct
Test object name is the test object class of the selected object. False
When you run a test, your application might not always respond with
True
the same speed.
All test objects are stored in the object repository. True
To update an object, perform the following steps: All of the choices
You can insert a synchronization point, which instructs the UFT for GUI
Testing tool to pause the test until an object property achieves the value True
you specify.
Base Filter properties is the most fundamental properties of a particular
True
test object class.
This is the identifier which object appears within the frame or dialog
Location
box.
The most fundamental properties of a particular test object class. None of the choices
Synchronization is used to instruct UFT for GUI Testing to wait for the
application process to complete before proceeding to the next step in True
the test.
You can modify the default amount of time that the UFT for GUI Testing
True
tool waits for a Web page to load.
You can not delete objects from the object repository. False
You can insert Exist or Wait statements that instruct the UFT for GUI
Testing tool to wait until an object exists or to wait a specified amount of True
time before continuing the test.
You can insert a synchronization point that instructs the UFT for GUI
True
Testing tool to wait until the Update Order button is enabled.
Property name enables you to specify the property value for which UFT
for GUI Testing should wait before continuing to the next step in the False
test.
This is the identifier that indicates the order which the order appears in
Index
the application code.

False
test(s) using UFT from HPE.
False
the object.
Reliable
False
your Web site or application
Benefits of Automated Testing where you can build a suite of tests that comprehensive
True
sessions
False
Question
Correct
Records additional detail into some steps, such as the coordinates of a Low level recording

True
sessions
The test or component to run. You can select any open item from the Test Name
drop- down list.
Value
object.
Recognizes objects based on their appearance rather than their native Insight Recording
properties.
False
Operation
False
Records additional detail into some steps, such as the coordinates of a Low level recording

than their native properties.
False
Options

True
Refers to the object in the AUT that was interacted with.

Item
It is a normal object based recording mode for UFT recording sessions.

Default
The target location for the results, as specified in the Results Location Results Location
tab.
Begins the run sessions

Run
False
the object.
Benefits of Automated Testing where automated tests are significantly Fast
Question
Correct

An action inside another action. Nested
When a local data sheet is used, values specific to an action appear in
True
the action data sheets that are available to that action only.
Result Details is a high-level results overview report, containing
True
general information about the test.
Checkpoints do not need to be managed in single tests. False
During your regular working process, you can add checkpoints to any
True
test.
A Web application generally uses a greater variety of objects as
True
compared to a Windows-based application.
Global Sheet enables you to insert data that applies only to that action. Global sheet
An action can be divided into logical sections such as the Login Test with Multiple Actions
process, Create New Order process, and Logoff process.
Non-reusable action is one that can be called only in the local test. True
It is a reusable action stored with another test.
It is one that can be called multiple times by the local test. None of the choices
Captured Data is a still image of the state of your application at a

True
particular step.
Reusable action is one that can be called multiple times by the local
True
test.
When the Web add-in is loaded, the Test Settings displays a Web tab.
True
The Browser Navigation Timeout allows 90 seconds for a page to load

by default.
False
Global Sheet enables you to insert data that applies only to that action.
False
Double Action Test is an action in UFT for GUI Testing refers to a set
of steps that are run as a group.
False
A Web design uses Web classes and Web object.

False
After a test is recorded, run the test to verify the test results.
True
Enables you to define a new internal environment variable and add it to

the list.
Add
Indicates that the value of the property is currently an environment

None of the choices
variable parameter.
Accessibility checkpoint identifies area of a web site to check for section

False
598 compliancy.
Checkpoints include the following type EXCEPT. Java
Question
Correct
Indicates that the value of the property is currently a parameter. None of the choices
It is a value of a property captured from the the AUT during the test Output Parameter
execution.
The environment variable xml file to load and use when your test runs. File
It is a checkpoint that can check for any value generated at run time. None of the choices
Table checkpoint checks the property values of an image False

It matches one to any number of occurrences of the preceding
Plus
character.
File content checkpoint check the image in a document generated
False
during a run session.
XML checkpoint checks the data content of XML documents. True
Names and their values are located in the Data Table. Input Parameter
Special character Period in UFT matches any single character. True
It checks the contents of a data based accessed by an application. Database Checkpoint
Page checkpoint checks the characteristics of a web page True

Brackets matches a range of character. True
Checkpoints can be inserted even while you are in recording mode. True
You can check the object property values in your application using
standard checkpoints.
True
Text checkpoints the text string is displayed within a defined area in a

window based application according to specified criteria.
False
Various Name is the test or component to run.

False
Optional Filter properties is the other properties that can help identify
True
objects of a particular class.
The platform is best suited for organizations that intend to develop and
launch one or more complex desktop, mobile, or web applications operating systems
intended for use on a variety of devices and
The HPE Unified Functional Testing platform is available as on-
premises software (for _______) or as software as a service available windows-based machines
for use on today's most popular web browsers
Before you begin creating tests, you must determine exactly what you
True
want to test in your application.
The Object Management area enables you to view the properties and
False
property values used to identify a test object during a run session
Global Sheet enables you to insert data that applies only to that action. Global sheet
Enables you to associate one or more shared object repositories with
Dialog Box
one or more actions in a test.
Checkpoints do not need to be managed in single tests. False
After a test is recorded, run the test to verify the test results. True
You can use only one shared object repositories. False
False
Captured Data is a still image of the state of your application at a
True
particular step.
Question
Correct
It is a reusable action stored with another test. External

Enables you to view the properties of an output value object, the same
Objects Details area(Output Value Objects)
You can also merge objects from the local object repository directly to a
shared object repository that is associated with the same action or True
component.
When the Web add-in is loaded, the Test Settings displays a Web tab. True
It is one that can be called multiple times by the local test. None of the choices
Enables you to view the properties of a checkpoint object, the same
Object Details area (Checkpoint Objects)
False
test(s) using UFT from HPE.
The name of the test object as it appears in the object repository (read-
Test Object to Identify
only).
Result Details is a high-level results overview report, containing general
True
information about the test.
Non-reusable action is one that can be called only in the local test. True
An action can be divided into logical sections such as the Login
Test with Multiple Actions
process, Create New Order process, and Logoff process.
During your regular working process, you can add checkpoints to any
True
test.
After creating tests, you must determine exactly what you want to test in
False
your application
A Web application generally uses a greater variety of objects as
True
compared to a Windows-based application.
Use a shared object repository, when: You are creating tests or
True
components using keyworddriven methodologies (not by recording)
The Browser Navigation Timeout allows 90 seconds for a page to load
False
by default.
You can use the shared object repository for multiple tests. True
Enables you to define related objects according to their distance or
Distance and hierarchy
hierarchical location relative to the object to identify.
Enables you to open multiple shared object repositories and modify
them as required.
True
devices.
During your test creation, you must determine exactly what you want to
False
test in your application.
__________ enables functional tests to be carried out automatically to
increase the speed and cost effectiveness of application development Micro Focus Unified Functional Testing
and delivery.
A Web design uses Web classes and Web object. False
An action inside another action. Nested
software features various important legacy products such as QuickTest
HP Unified Functional Testing
Professional, WinRunner, and HP Service Test.
When you open an object repository, it opens in a read-only format by
True
default.
You can open as many shared object repositories as you want. True
Double Action Test is an action in UFT for GUI Testing refers to a set of
False
steps that are run as a group.
Displays the image that UFT for GUI Testing uses to identify the object
Test Object Image area(Insight Test Objects)
in the application.
Highlights the visual relation between all related objects and the objects
Preview
matching the test object to identify (main UFT window is hidden).
The details of the visual relation for the selected related object. Relation details
Reusable action is one that can be called multiple times by the local
True
test.
The Object Repository System enables you to open multiple shared False
Question
Correct
object repositories and modify them as needed

The Unified Functional Testing platform from HPE is suitable for use by
development, testing and ______ individuals and teams due to its quality assurance
range of automated functionality and performance testing tools.
Multiple shared object repositories can store in data sheets. False
Before a record session is initiated, you must set the record and run
True
settings for the Web application that you want to test.
__________ enables functional tests to be carried out automatically to increase the
speed and cost effectiveness of application development and delivery.
 Micro Focus Unified Functional Testing Correct
A constant is a named entity that sometimes represent the same value and cannot
be changed
 True
 False Correct
A variable is a named entity that can represent different values at different times
 True Correct
 False
A Web application generally uses a greater variety of objects as compared to a

Windows-based application.
 True Correct
A Web design uses Web classes and Web object.
 False Correct
Accessibility checkpoint identifies area of a web site to check for section 598
compliancy.
 False Correct
After a test is recorded, run the test to verify the test results.
 True Correct
After creating tests, you must determine exactly what you want to test in your
application
 False Correct
After every recording, the script requires correlation You can continue to correlate
using the script after using the recording correlation method
Question
Correct
 True Correct
 False
After playback, the replay summary advises as to whether the script should be
correlated because dynamic server values were found
 True Correct
 False
All test objects are stored in the object repository.
 True Correct
An action can be divided into logical sections such as the Login process, Create New
Order process, and Logoff process.
 Test with Multiple Actions Correct
An action inside another action.
 Nested Correct
ANSI C functions allow you to add:CommentsControl flow statementsConditional

statements
 True Correct
 False
Automated testing is to verify if the AUT performs the designated tasks, you
automate a series of tests that run without human intervention.
 True Correct
Base Filter properties is the most fundamental properties of a particular test object
class.
 True Correct
Before a record session is initiated, you must set the record and run settings for the
Web application that you want to test.
 True Correct
Before you begin creating tests, you must determine exactly what you want to test in
your application.
Question
Correct
 True Correct
 Run Correct
Benefits of Automated Testing where automated tests are significantly faster than
human users.
 Fast Correct
Benefits of Automated Testing where you can build a suite of tests that covers every
feature in your Web site or application.
 comprehensive Correct
Benefits of Automated Testing where you can program sophisticated tests that bring
out hidden information
 Programmable Correct
Benefits of Automated testing where you can test how the Web site or application
reacts after repeated execution of the same operations
 Repeatable Correct
Brackets matches a range of character.
 True Correct
Business processes that are crucial in day-to-day operations
 Mission-Critical Process Correct

 Process
 Business Process
Check stability of system under extended periods of load
 load testing
 volume testing Correct
 Component Testing
Checkpoints can be inserted even while you are in recording mode.
 True Correct
Question
Correct
Checkpoints do not need to be managed in single tests.
 False Correct
Checkpoints include the following type EXCEPT.
 Java Correct
Class is the selected name of the selected object.
 False Correct
Community Links is the community button to open news about UFT GUI Testing.
 False Correct
Comprehension can build a suite of tests that covers every feature in your Web site
or application
 False Correct
Correlation is used when a dynamic script includes a recorded value
 True
 False Correct
Data driven functionally without which users could not operate.
 False Correct
Default is a normal object based recording mode for UFT recording sessions
 True Correct
Determine whether the system handles anticipated real-world load
 load testing Correct
 stress testing
Displays the image that UFT for GUI Testing uses to identify the object in the
application.
 Test Object Image area(Insight Test Objects) Correct

Question
Correct
Double Action Test is an action in UFT for GUI Testing refers to a set of steps that are
run as a group.
 False Correct
During your regular working process, you can add checkpoints to any test.
 True Correct
During your test creation, you must determine exactly what you want to test in your
application.
 False Correct
Dynamic Content is the process of unique identifiers.
 True Correct
Enables you to associate one or more shared object repositories with one or more
actions in a test.
 Dialog Box Correct
Enables you to create a test or component or a solution by clicking the New or Open
buttons after selecting a test, component or solution name
 Recent Test/Components and Recent Solutions Correct
Enables you to define a new internal environment variable and add it to the list.
 Add Correct
Enables you to define related objects according to their distance or hierarchical

location relative to the object to identify.
 Distance and hierarchy Correct
Enables you to open multiple shared object repositories and modify them as
required.
 Object Repository Manager dialog box Correct
Enables you to open multiple shared object repositories and modify them as
required. Object Repository Manager dialog box
 Object Repository Manager dialog box Correct

Question
Correct
Enables you to verify the following features of Application Under test
 Functional Testing Correct
Enables you to view the properties of a checkpoint object, the same way as you do in
the relevant Checkpoint Properties dialog box.
 Object Details area (Checkpoint Objects) Correct
Expands or collapses the dialog box to show the Results Location and Input
Parameters tabs.
 Options Correct
File content checkpoint check the image in a document generated during a run
session.
 False Correct
Filtering data using the legend provides a fast and easy way to hide unwanted data
 True Correct
 False
Find system's breaking point; measure whether system's environment is properly

configured for unexpected, high-transaction volume
 stress testing Correct
 load testing
Find the behaviour and performance of each tier
 stress testing
 Component Testing Correct
 load testing
Global Sheet enables you to insert data that applies only to that action.
 Global sheet Correct
Highlights the visual relation between all related objects and the objects matching
the test object to identify (main UFT window is hidden).
 Preview Correct
Question
Correct
HPE has the hardware which functions using an interactive, visual system and lets
developers and testers view, manipulate, and assess the application's graphical user
interface.
 False Correct
If a test for a ________________is selected, HPE Unified Functional Testing allows users
to install or push their developed mobile apps to real Android, iOS or Windows
devices and interact with both the device and the app from within the platform.
 mobile app Correct
If a test for a desktop or web app is to be performed, users select the proper settings
on an _________________ and begin the test by hitting the Record button
 in-platform prompt Correct
If server-generated data gets reused by the client, VuGen automatically correlates it
 True Correct
 False
In exporting and importing rules, scripter 1 will export the custom rules to a file with
cor extension
 True Correct
 False
In exporting and importing rules, scripter 2 will import the custom rules from cor
extension file to his machine
 True Correct
 False
In recording a new script, after creating the rule, when you record a new script, the
rule is automatically applied and correlates the script
 True Correct
 False
In regenerating the script, if you have already recorded the script, create the rules,
and then regenerate the script to apply the newly created correlation rule
 True Correct
 False
Question
Correct
In the initial stages, ________________ goals that cannot be measured will allow later
filtering to create more focused goals
 Analysis Tool
 Load Runner
 Load Generators
 Documenting Correct
Indicates that the value of the property is currently a parameter.
 None of the choices Correct
Indicates that the value of the property is currently an environment variable

parameter.
It checks the contents of a data based accessed by an application.
 Database Checkpoint Correct
It Click the Community button to open news about UFT GUI Testing.
 Community Area Correct
It Click the Links button to open links to the UFT for GUI Testing Help.
 Links Area Correct
It Click the Support button to open links to UFT for GUI Testing support
 Support Area Correct
It is a browsers-based application.
 Mercury Tours Correct
It is a checkpoint that can check for any value generated at run time.
It is a file that defines the script to execute, the number of Vusers to run, the goals of
the test, the computer that will host the Vusers, and the condition under which the
load test runs
 Script
Question
Correct
 Load Testing
 Scenario Correct
 Vusers
 Default Correct
 It is a reusable action stored with another test. Correct
It is a set of all actions or user steps performed within an application to accomplish a

business goal
 Business process Correct

 Vusers
 Script
 Load Testing
It is a set of users acting upon an application in a similar manner at the same time
 Courtesy
 Consistency
 Concurrency Correct
It is a value of a property captured from the the AUT during the test execution.
 Output Parameter Correct
It is a web_submit_data records all data that was actually sent from the browser to
the server
 URL Correct
 LAN
 HTML
It is a windows- based application.
 Flight Reservation Correct
It is an end-to-end measurement of time elapsed when one or more steps in a

business process have been completed
 LoadRunner
 LoadRunner think time
Question
Correct
 LoadRunner Transaction Correct
It is aweb_submit_form only records options that an end user is allowed to see and
change
 URL
 HTML Correct
 LAN
It is one that can be called multiple times by the local test.
It matches one to any number of occurrences of the preceding character.
 Plus Correct
Itconsists of server requests that are customized for each user
 Mission-critical process
 Dynamic Content Correct
 Heavy throughput
Item refers to the object in the AUT that was interacted with.
 True Correct
Itis a set of actions or user steps performed within an application to accomplish a

business goal
 Process
 Mission-Critical Process
 Business Process Correct
Itis the administrative centre for creating, maintaining and executing scenarios The
machine you designate to manage and maintain your scenarios
 Product Evaluation
 Regression
 Controller Correct
Ituses the load test results to create graphs and reports that correlate system
information, identify bottlenecks and performance issues
 Reliability
 Vuser Script
Question
Correct
 Analysis Tool Correct
Jenkins is a tool that evaluates the functionality and load performance of any created
or deployed APIs present in the app being tested.
 False Correct
Lines between /*/* are comments
 True
 False Correct
Links Area is the Links button to open links to the UFT for GUI Testing Help.
 True Correct
LoadRunner offers a wide range of performance monitors for isolating

bottlenecksPerformance monitors:Gather data for online/offline analysisDisplay real-
time data during testingGather data for online root cause analysis after testing
 True
 False Correct
Low Recording recognizes objects based on their appearance rather than their native
properties
 False Correct
Manual Testing enables you to verify the following features of Application Under test.
 False Correct
Mercury Tools is a browsers-based application.
 False Correct
Multiple shared object repositories can store in data sheets.
 False Correct
Names and their values are located in the Data Table.
 Input Parameter Correct
Non-reusable action is one that can be called only in the local test.
Question
Correct
 True Correct
Number field value is dynamic and requires correlation
 True Correct
 False
One advantage of exporting and importing correlation rules is that it allows other
scripts to use rules that were already created
 True Correct
 False
Operation refers to data that you specify for the operation performed on the object.
 False Correct
Optional Filter properties is the other properties that can help identify objects of a
particular class.
 True Correct
Page checkpoint checks the characteristics of a web page
 True Correct
Property name enables you to specify the property value for which UFT for GUI
Testing should wait before continuing to the next step in the test.
 False Correct
Recognizes objects based on their appearance rather than their native properties.
 Insight Recording Correct
Records additional detail into some steps, such as the coordinates of a mouse click
on an object so that UFT may use that additional data.
 Low level recording Correct
Refers to data that you specify for the operation performed on the object.
 Value Correct
Refers to the action that you perform on the object during the recording session. This
is also called the method.
Question
Correct
 Operation Correct
 Item Correct
Result Details is a high-level results overview report, containing general information

about the test.
 True Correct
Reusable action is one that can be called multiple times by the local test.
 True Correct
software features various important legacy products such as QuickTest Professional,

WinRunner, and HP Service Test.
 HP Unified Functional Testing Correct
Special character Period in UFT matches any single character.
 True Correct
Stage 2 of GUI Testing Workflow
 Preparing the Testing Infrastructure Correct
Stage 6 GUI Testing Workflow
 Analyzing Run Results and Reporting Defects Correct
Synchronization is used to instruct UFT for GUI Testing to wait for the application
process to complete before proceeding to the next step in the test.
 True Correct
Table checkpoint checks the property values of an image
 False Correct
Test object name is the test object class of the selected object.
 False Correct
Question
Correct
Tests perform precisely the same operations each time they are run, thereby
eliminating human error
 Reliable Correct
Text checkpoints the text string is displayed within a defined area in a window based
application according to specified criteria.
 False Correct
The ______________ allows for both keyword-driven and objectbased automated

functional testing commands, but also provides manual scripting tools for users who
want a more hands-on approach.
 platform Correct
The amount of time that a real user pauses between steps
 LoadRunner Transaction
 LoadRunner think time Correct
 LoadRunner
The Browser Navigation Timeout allows 90 seconds for a page to load by default.
 False Correct
The details of the visual relation for the selected related object.
 Relation details Correct
The environment variable xml file to load and use when your test runs.
 File Correct
The first step in isolating the problem in a specific subsystem is to understand how
the network performed during the test
 True Correct
 False
The HPE Unified Functional Testing platform is available as on-premises software (for
_______) or as software as a service available for use on today's most popular web
browsers
 windows-based machines Correct

Question
Correct
The HPE Unified Functional Testing tool offers integration with Jenkins and other HPE
and third-party app development tools such as HP Quality Center and HPE
Application Lifecycle Management suite.
 True Correct
The LoadRunner tool used to create VuGen scripts that emulate user behaviour on an
application
 Vuser Script
 Vuser Script Creation
 Virtual User Generation Correct
The most fundamental properties of a particular test object class.
The name of the test object as it appears in the object repository (read-only).
 Test Object to Identify Correct
The Object Repository System enables you to open multiple shared object
repositories and modify them as needed
 False Correct
The platform is best suited for organizations that intend to develop and launch one or
more complex desktop, mobile, or web applications intended for use on a variety of
devices and
 operating systems Correct
The platform will automatically record any ______________ or keyword-based on-screen

actions and commands undertaken by the user.
 interactive Correct
The Programming language used for VuGen scripts
 Vu-Gen
 ANSI-C Correct
 Create Vuser Scripts
The second step in the Script Creation Phase is?
 Virtual User Creation Correct

Question
Correct

 Virtual User Generation
The target location for the results, as specified in the Results Location tab.
 Results Location Correct
The test or component to run. You can select any open item from the drop- down list.
 Test Name Correct
The UFT platform from HPE allows users to create and execute automated
functionality and performance tests on native and cross-platform mobile apps
developed for Android, iOS, and Windows devices.
 True Correct
The Unified Functional Testing platform from HPE is suitable for use by development,
testing and ______ individuals and teams due to its range of automated functionality
and performance testing tools.
 quality assurance Correct
There is a manual script writing involved when creating automated test(s) using UFT
from HPE.
 False Correct
This a geographically dispersed network
 WAN Correct
 LAN
 PAN
 MAN
This allows data to be written, read, and destroyed without affecting production users
and allows the test system to be rebooted during test runs without affecting
production users
 Test Environment Correct

 System Monitoring
 System
This allows you to control all the Vusers for the scenario from a single location
 Vusers
Question
Correct
 Components
 Analyzer
This allows you to decide which business processes to record, isolate peak loads and
peak load times, and document user actions and valid input data for each business
process
 Load Runner controller

 Gathering information Correct
 Virtual Users
 Script emulator
This is an end-to-end measurement of time elapsed when one or more steps in a

business proves have been completed
 Analyzer
 LoadRunner transaction Correct
 Components
 Vusers
This is the administrative center for creating, maintaining, and executing scenarios
 Load Runner
 Load Generators
 Analysis Tool
This is the identifier that applicable only to web applications.
 Creation Time Correct
This is the identifier that indicates the order which the order appears in the
application code.
 Index Correct
This is the identifier which object appears within the frame or dialog box.
 Location Correct
This records the scripts that emulate the steps of the real users using the application
 Load Runner controller

 Virtual User Generator Correct
 Virtual Users
Question
Correct
 Script emulator
This should outline all of your load test objectives
 Goals
 Stress Testing Goals
 Conceptual Goals Correct
 Load Testing Goals
To create a new _______________, users open a new project and select what type of
app (Windows desktop, mobile or web) the test is to be performed on.
 test script Correct
To update an object, perform the following steps:
 All of the choices Correct
To verify if the AUT performs the designated tasks, you automate a series of tests
that run without human intervention.
 Automated Testing Correct
To verify if the AUT performs the designated tasks, you manually execute a series of
tests.
 Manual Testing Correct
To work correctly, automatic correlation requires at least two playbacks
 True
 False Correct
UFT stands for United Functional Testing.
 False Correct
Use a shared object repository, when: You are creating tests or components using
keyworddriven methodologies (not by recording)
 True Correct
 False Correct
Question
Correct
Very Popular
 Mission-critical process
 Heavy throughput Correct
 Business Process
VuGen can correlate dynamic data based on predefined rules in the Recording
Options
 True Correct
 False
What objective of Load Testing tries to identify the best server for 100 users?
 Controller
 Regression
 Product Evaluation Correct
What should you do to indicate that you would like to ask a question?
 Raise your hand Correct

 Run
When a local data sheet is used, values specific to an action appear in the action
data sheets that are available to that action only.
 True Correct
When running a script, what settings can be changed to allow you to control the
behavior of a Vuser?
 Analysis Tool
 Runtime Settings Correct
 Load Generators
 Load Runner
When the Web add-in is loaded, the Test Settings displays a Web tab.
 True Correct
When you open an object repository, it opens in a read-only format by default.
 True Correct
Question
Correct
When you run a test, your application might not always respond with the same
speed.
 True Correct
With Correlation Studio you can add and edit rules
 True Correct
 False
With Correlation Studio you can scan for correlations using rules, record-based
engines, and replay-based engines
 True Correct
 False
With Correlation Studio you cannot review details pertaining to a specific dynamic
value in a snapshot
 True
 False Correct
XML checkpoint checks the data content of XML documents.
 True Correct
You can add an object to the object repository directly from the Object Spy.
 True Correct
You can also merge objects from the local object repository directly to a shared
object repository that is associated with the same action or component.
 True Correct
You can check the object property values in your application using standard
checkpoints.
 True Correct
You can create a custom correlation rule to correlate during recording if you know
the context in advance This is a one-time task After setup, all future recordings add
the correlation in the script during recording
 True Correct
 False
Question
Correct
You can define correlation options before you record a script
 True Correct
 False
You can insert a synchronization point that instructs the tool to wait until the Update
Order button's enabled property equals.
 True Correct
You can insert a synchronization point that instructs the UFT for GUI Testing tool to
wait until the Update Order button is enabled.
 True Correct
You can insert a synchronization point, which instructs the UFT for GUI Testing tool to
pause the test until an object property achieves the value you specify.
 True Correct
You can insert Exist or Wait statements that instruct the UFT for GUI Testing tool to
wait until an object exists or to wait a specified amount of time before continuing the
test.
 True Correct
You can modify the default amount of time that the UFT for GUI Testing tool waits for
a Web page to load.
 True Correct
You can not delete objects from the object repository.
 False Correct
You can open as many shared object repositories as you want.
 True Correct
You can use only one shared object repositories.
 False Correct
You can use the shared object repository for multiple tests.
 True Correct
Question
Correct
Asdasdasds
Select one:
True 
False
Question 2
Correct
Select one:
a. Blocking
b. Item

c. Value d. Operation Your answer is correct.
UFT stands for Unitied Functinal Testing.
Select one:
True
False 
Question 4
Correct

Question
Correct
Tests perform precisely the same operations each time they are run, thereby eliminating human error
Select one:
a. Rely

b.Reliable c. Resilience
d. Manual
Your answer is
correct.
Question 5
Correct
Select one:
a. Automated Testing

b.Functional Testing c. Testing Infrastructure
d. Manual
Testing Your answer
is correct.
6
Question
Correct
Select one:
True
False 
Question 7
Correct
Comprehension can build a suite of tests that covers every feature in your Web site or application.
Select one:
True
False 
Question 8
Correct
The UFT platform from HPE allows users to create and execute automated functionality and performance tests on
native and cross-platform mobile apps developed for Android, iOS, and Windows devices.
Select
one: True

False
9
Select one:
a. Areal Link
b. Area Unit
Question
Correct

c. Links Area d. Support Area
Your answer is
correct.
Question 10
Correct
Select one:
b. Manual Testing
c. Testing Infrastructure

d. Functional Testing
Your answer is
correct.
11
Select one:
a. Preparing the Testing Infrastructure
b. Adding Steps to your Action

c. Analyzing Run Results and Reporting Defects d. Running and Debugging you Test
Question
Correct
Your answer is
correct.
Question 12
Correct
Select one:
a. Results

b.Run c. Options
d. Fun
Your answer is
correct.
13
Records additional detail into some steps, such as the coordinates of a mouse click on an object so that UFT may
use that additional data.
Select one:
a. Mid-High level recording

b.Low level recording c. High level recording
d. Mid level recording
Your answer is
correct.
Question
Correct
Question 14
Correct
Jenkins is a tool that evaluates the functionality and load performance of any created or deployed APIs present in
the app being tested.
Select one:
True
False 
Question 15
Correct
Benefits of Automated Testing where you can build a suite of tests that covers every feature in your Web site or
application.
Select one:
a. Repeat
b. fast

c. comprehensive d. comprehension
Your answer is
correct.
16
The HPE Unified Functional Testing tool offers integration with Jenkins and other HPE and third-party app
development tools such as HP Quality Center and HPE Application Lifecycle Management suite.
Question
Correct
Select
one: True

False
Question 17
Correct
Manual Testing enables you to verify the following features of Application Under test.
Select one:
True
False 
Question 18
Correct
Select one:
True
False 
Question 19
Correct
Select
one: True

False
Question
Correct
20
Incorrect
Select one:
a. Mercury Tours
b. Mercury Tools

c. Mercury Tower d. Web server
Your answer is
incorrect.
Question 21
Correct
Select one:

a. Functional Testing b. Automated Testing
d. Manual Testing Your answer is correct.
22
To verify if the AUT performs the designated tasks, you manually execute a series of tests.
Select one:
Question
Correct
a. Mutuality
b. Manual
c. Automated Testing

d. Manual Testing
Your answer is
correct.
Question 23
Correct
Select one:
True
False 
Question 24
Correct
Automated testing is to verify if the AUT performs the designated tasks, you automate a series of tests that run
without human intervention.
Select one:
True 
False
25
Correct
Refers to the action that you perform on the object during the recording session. This is also called the method.
Question
Correct
Select one:
a. Value
b. Item

c. Operation d. Blocking
Your answer is
correct.
Question 26
Correct
There is a manual script writing involved when creating automated test(s) using UFT from HPE.
Select one:
True
False 
Question 27
Correct
Stage 2 of GUI Testing Workflow
Select one:
a. Analyzing your Application
b. Running and Debugging you Test

c. Preparing the Testing Infrastructure d. Adding Steps to your Action
Your answer is
correct.
Question
Correct
28
To verify if the AUT performs the designated tasks, you automate a series of tests that run without human
intervention.
Select one:
a. Mutuality

b.Automated Testing c. Manual Testing
d. Manual
Your answer is
correct.
Question 29
Correct
Select one:

b.Functional Testing c. Testing Infrastructure
d. Manual
Testing Your answer
is correct.
Question
Correct
30
Incorrect
Select one:
a. Area Unit
b. Community Area
c. Community link

d. Links Area
Your answer is
incorrect.
Question 31
Correct
Benefits of Automated Testing where you can program sophisticated tests that bring out hidden information
Select one:
a. Program
b. Programming

c. Programmable d. Comprehensive
Your answer is
correct.
Question 32
Correct

Question
Correct
Select
one: True

False
33
Benefits of Automated testing where you can test how the Web site or application reacts after repeated execution
of the same operations
Select one:

a. Repeatable b. Recyclable
c. Reusable
d. Reduce
Your answer is
correct.
Question 34
Correct
Select one:
b. Manual Testing

d. Functional Testing
Question
Correct
Your answer is
correct.
Question
Correct
35
Select one:

a. Flight Reservation b. Links Area
c. Web server
d. Mercury Tool
Your answer is
correct.
Question 36
Correct
Select one:

a. Results Location b. Index Results
c. Answer Folder
d. Results Folder
Your answer is
correct.
Question 37
Correct

Question
Correct
HPE has the hardware which functions using an interactive, visual system and lets developers and testers view,
manipulate, and assess the application's graphical user interface.
Select one:
True
False 
38
Benefits of Automated Testing where automated tests are significantly faster than human users.
Select one:

a. Fast b. Reusable
c. Repeat
d. Reliable
Your answer is
correct.
Question 39
Correct
Enables you to create a test or component or a solution by clicking the New or Open buttons after selecting a test,
component or solution name.
Select one:
a. Support Area

b.Recent Test/Components and Recent Solutions c. Sample Test
d. Community Test
Question
Correct
Your answer is
correct.
40
Operation refers to data that you specify for the operation performed on the object.
Select one:
True
False 
Question 41
Correct
The test or component to run. You can select any open item from the drop- down list.
Select one:
a. Run a Test
b. Result Location

c. Test Name d. Various Name
Your answer is
correct.
Question 42
Correct
It Click the Support button to open links to UFT for GUI Testing support.
Question
Correct
Select one:
a. Links Area
b. Areal Link

c. Support Area d. Area Unit Your answer is correct.
43
Recognizes objects based on their appearance rather than their native properties.
Select one:
a. Low Recording

b.Insight Recording c. Default
d. Analog
Your answer is
correct.
Question 44
Correct
Low Recording recognizes objects based on their appearance rather than their native properties.
Select one:
True
False 
Question 45
Correct

Question
Correct
Select one:
True 
False
46
Select one:
a. Insight recording
b. Low recording
c. Analog

d. Default
Your answer is
correct.
Question 47
Correct
Select one:
a. Value
b. Operation
c. Blocking

d. Item
Your answer is
correct.
Question
Correct
48
Match the missing word/details to its corresponding statement.
If a test for a ________________is selected, HPE Unified Functional Testing allows users to
install or push their developed mobile apps to real Android, iOS or Windows devices and mobile app
interact with both the device and the app from within the platform.

The ______________ allows for both keyword-driven and object-based automated functional testing
commands, but
platform
also provides manual scripting tools for users who want a more hands-on approach.

The platform will automatically record any ______________ or keyword-based on-screen actions and
commands interactive undertaken by the user.

If a test for a desktop or web app is to be performed, users select the proper settings on an
_________________ and in-platform prompt begin the test by hitting the Record button.

To create a new _______________, users open a new project and select what type of app
(Windows desktop, mobile test script or web) the test is to be performed on.

Your
answer is
correct.
Question 49
Correct
Select one:
True
False 
Question
Correct
50
Expands or collapses the dialog box to show the Results Location and Input Parameters tabs.
Select one:
a. Operation

b.Options c. Test Name
d. Operators
Benefits of Automated Testing where you can build a suite of tests that covers
every feature in your Web site or application. Comprehensive
thereby eliminating human error Reliable

Functional Testing
It Click the Support button to open links to UFT for GUI Testing support
Support Area
It Click the Support button to open links to UFT for GUI Testing support.
Support Area
Benefits of Automated Testing where you can program sophisticated tests that
bring out hidden information Programmable
Question
Correct
Mercury Tours

Analyzing Run Results and Reporting Defects
Community Area
To verify if the AUT performs the designated tasks, you automate a series of
tests that run without human intervention. Automated Testing
To verify if the AUT performs the designated tasks, you manually execute a
series of tests.
Manual Testing
Repeatable
Links Area
Stage 2 of GUI Testing Workflow Preparing

the Testing Infrastructure
UFT stands for Unitied Functinal Testing.

False
Question
Correct

False

faster than
human
users.
Fast
True
False

New or Open
buttons after selecting a test, component or
solution name.
Recent Test/Components and Recent Solutions

Flight Reservation

False
Low Recording recognizes objects based on their appearance rather than their
native properties.
False
Comprehension can build a suite of tests that covers every feature in your Web
site
or application. False
Question
Correct
Operation refers to data that you specify for the operation performed on the
object.
False
Input Parameters tabs. Options

properties. Insight Recording
True
session. This is also called the method. Operation
Value
The test or component to run. You can select any open item from the drop-
down list.
Test Name

Item

True
Question
Correct

False
True
Manual Testing enables you to verify the following features of Application Under
test.
False

True
Results Location

Default
Records additional detail into some steps, such as the coordinates of a mouse
click on an object so that UFT may use that additional data. Low level
recording
Performance Testing is a subset of performance engineering.

True
Question
Correct
Performance Testing cannot uncover what needs to be tested and upgraded

before the product goes to the market. False
Without Performance Testing, software is likely to suffer from issues such as

running slow while several users use it simultaneously. True
Application Testing will determine whether their software meets speed,

scalability, and stability requirements under expected workloads. False
Applications sent to market with poor performance metrics due to non-existent

or poor performance testing are likely to gain popularity and new niche in the
market. False
Mission-critical applications like space launch programs or life-saving medical

equipment should be performance tested to ensure that they run for a long
period without deviations.
True
Only a 1-minute downtime of Google.com (19-Aug-13) is estimated to cost the

search giant as much as $545,000.
False
It is estimated that companies lost sales worth $1100 per second due to a
recent Amazon Web Service Outage.
True
Scability Testing is to check software application's performance under

varying database volumes. False
Question
Correct
Volume Testing helps plan capacity addition to the software system.

False
There is a manual script writing involved when creating automated test(s) using
UFT from HPE.
False
Jenkins is a tool that evaluates the functionality and load performance of any
created or deployed APIs present in the app being tested. False
HPE has the hardware which functions using an interactive, visual system and
lets developers and testers view, manipulate, and assess the application's
graphical user interface. False
test script
To create a new _______________, users open a new project and select

Answer 1
what type of app (Windows desktop, mobile or web) the test
is to be performed on.
The ______________ allows for both keyword-driven and object-based
automated functional testing commands, but also provides manual
scripting tools for users who want a Answer 2 more hands-on
approach.
platform

proper settings on an _________________ and begin in-platform prompt
Answer 3
the test by hitting the Record button.
The platform will automatically record any ______________ or
keyword-based on-screen actions and commands
interactive
Answer 4
undertaken by the user.
If a test for a ________________is selected, HPE Unified

Functional Testing allows users to install or push their developed
mobile apps to real Android, iOS or Windows devices and interact with
Answer 5
both the device and the app from within mobile app
the platform.
Question
Correct
devices. True
The HPE Unified Functional Testing tool offers integration with Jenkins and other
HPE and third-party app development tools such as HP Quality Center and HPE
Application Lifecycle Management suite.
True
Prelim Exam
These are monitored to determine what wait times can be cut down when
dealing with the how fast data is retrieved from memory.
Select one:
a.
Thread Counts
b.
Top Waits
c.
Garbage Collection
d.
Rollback Segment
Feedback
Your answer is incorrect.
The correct answer is: Top Waits
Question 2
Incorrect
Remove flag
Question text
This referred to the time from when a user enters a request until the first
Question
Correct
character of the response is received.
Select one:
a.
Network Output
b.
Network Bytes
c.
Throughput
d.
Response Time
Feedback
The correct answer is: Response Time
Question 3
Not answered
Marked out of 1.00
Flag question
Question text
This is the average number of read and write requests queued for the
selected disk during a sample interval.
Select one:
a.
Disk Queue Length
b.
Network Byte
c.
Disk Queue Processor
Question
Correct
d.
Disk Queue Interruption
Feedback
The correct answer is: Disk Queue Length
Question 4
Incorrect
Flag question
Question text
This shows the bits per second used by a network interface.
Select one:
Pro a.
cessor Usage
b.
Pri ate Bytes
v
c.
Memory Use
d.
Bandwidth
Feedback
The correct answer is: Bandwidth
Question 5
Not answered
Marked out of 1.00
Flag question
Question text
Question
Correct
This _____________ adopted for performance testing can vary widely but
the objective for performance tests remain the same.
Select one:
a.
methodology
b.
test
c.
assessment
d.
evaluation
Feedback
The correct answer is: methodology
Question 6
Not answered
Marked out of 1.00
Flag question
Question text
Question
Correct
The key to fixing a ________________ issue is to find the section of code that
is causing the slowdown and try to fix it there.
Select one:
a.
loading
b.
start up
c.
bottlenecking
d.
server issue
Feedback
The correct answer is: bottlenecking
Question 7
Not answered
Marked out of 1.00
Flag question
Question text
The IT expert should understand the details of the hardware, software and
_________________ used during testing before beginning the testing
process.
Select one:
a.
Question
Correct
network configurations
b. network
derivation
c.
network system
d.
network assessment
Feedback
The correct answer is: network configurations
Question 8
Not answered
Marked out of 1.00
Flag question
Question text
An applications health can be measured by the number of threads that

are running and currently active.
Select one:
a. hit
s per
second
b. thr
ead
counts
c.
database locks
d.
rollback segment
Feedback
Question
Correct

The correct answer is: thread counts
Question 9
Not answered
Marked out of 1.00
Flag question
Question text
The number of bytes a process has allocated that can't be shared among
other processes. These are used to measure memory leaks and usage.
Select one:
Ba a.
n dwidth
b.
Memory Use
c.
Disk Time
d.
Private Bytes
Feedback
The correct answer is: Private Bytes
Question 10
Not answered
Marked out of 1.00
Flag question
Question text
This is when the code that is not from the current working set is called up
from elsewhere and retrieved from a disk.
Question
Correct
Select one:
a.
Disk Time
b.
Committed Memory
c.
Hard Page Faults
d.
Memory Pages
Feedback
The correct answer is: Hard Page Faults
Question 11 Not answered
Marked out of 1.00
Flag question
Question text
This has to do with the number of SQL statements that are handled by
cached data instead of expensive I/O operations.
Select one:
a.
Database Locks
b.
Rollback Segment
c.
Hits per Second
d.
Hit Ratios
Feedback
Question
Correct
The correct answer is: Hit Ratios

Question 12
Not answered
Marked out of 1.00
Flag question
Question text
This refers to the amount of physical memory available to process on a
computer.
Select one:
a.
Memory Use
b.
Bandwidth
c.
Private Bytes
d.
Disk Time
Feedback
The correct answer is: Memory Use
Question 13
Not answered
Marked out of 1.00
Flag question
Question text
It has to do with returning unused memory back to the system.
Select one:
a.
Question
Correct
Dat
abase Locks
b.
To Waits
p
c.
Ga bage Collection
r d.
Thread Counts
Feedback
The correct answer is: Garbage Collection
Question 14 Not answered
Marked out of 1.00
Flag question
Question text
This is normally the initial time it takes an application to start.
Select one:
a.
long load
time
loadin
g b.
c.
short load time
d.
load
time
Feedback
The correct answer is: long load time
Question 15
Not answered
Marked out of 1.00
Question
Correct
Flag question
Question text
These referred to the number of pages written to or read from the disk in
order to resolve hard page faults.
Select one:
a.
Committed Memory
b.
Memory Pages
c.
Network Output Queue
d.
Page Faults
Feedback
The correct answer is: Memory Pages
Question 16
Not answered
Marked out of 1.00
Flag question
Question text
The key to fixing a bottlenecking issue is to find the section of code
that is causing the slowdown and delete it entirely.
Select one:
True
False
Question
Correct
Feedback
The correct answer is 'False'.
Question 17
Not answered
Marked out of 1.00
Flag question
Question text
A software product suffers from this when it cannot handle the expected
number of users or when it does not accommodate a wide enough range
of users.
Select one:
a.
bottlenecking
b. poor
scalability
c.
long loading time
d.
poor response time
Feedback
The correct answer is: poor scalability
Question 18
Not answered
Marked out of 1.00
Flag question
Question text
This refers to an amount of time processor spends executing non-idle
threads. Select one:
a.
Question
Correct
Memory Use
b.
Processor Usage
c.
Disk Time
d.
Bandwidth
Feedback
The correct answer is: Processor Usage
Question 19
Not answered
Marked out of 1.00
Flag question
Question text
All are common activities of performance bottlenecks except one.
Select one:
a.
Disk Usage
b.
Operating System Limitations
c.
Software Enhancement
d.
CPU Utilization
Feedback
The correct answer is: Software Enhancement
Question 20
Not answered
Marked out of 1.00
Question
Correct
Flag question
Question text
This should be very quick or else, the user has to wait too long and they
lose interest.
Select one:
a.
start up
b.
end task
c.
response time
d.
load time
Feedback
The correct answer is: response time
Question 21
Not answered
Marked out of 1.00
Flag question
Question text
The refers to the amount of virtual memory
used. Select one:
a.
Question
Correct
Disk Time
b.
Bandwidth
c.
Private Bytes
d.
Committed Memory
Feedback
The correct answer is: Committed Memory
Question 22 Not
answered
Marked out of 1.00
Flag question
Question text
This is when either coding errors or hardware issues cause a decrease of
throughput under certain loads.
Select one:
a. poor
scalability
b. bottlene
cking
c.
long loading period
d.
poor response time
Feedback
The correct answer is: bottlenecking
Question 23
Not answered
Question
Correct
Marked out of 1.00
Flag question
Question text
Proper loading includes goals and constraints for throughput,
_____________ and resource allocation. It is also necessary to identify
project success criteria outside of these goals and constraints.
Select one:
a.
start up
b.
booting
c.
response times
d.
calibrating
Feedback
The correct answer is: response times
Question 24
Not answered
Marked out of 1.00
Flag question
Question text
This is the rate of a computer or what the network can receive a request
per second. Select one:
a.
Question
Correct
Response Time
b.
Rollback Segment
c.
Hit Ratio
d.
Throughput
Feedback
The correct answer is: Throughput
Question 25
Not answered
Marked out of 1.00
Flag question
Question text
This is an amount of time when the disk is busy executing a read or write
request.
Select one:
a.
Disk Time
b.
Private Bytes
c.
Committed Memory
d.
Bandwidth
Feedback
The correct answer is: Disk Time
Midterm Quiz 1
Which of the following is a system, program, or network that is the subject of a
security analysis?
Question
Correct
a. process of evaluation
b. target of evaluation
c. security of agenda
MAC address spoofing is which type of attack?

a. Authentication
b. analysis
c. duplication
d. synthesis
Name the attack type when a hacker attempts to attack a host via the Internet.
a. remote attack
b. security attack
c. malign attack
Hacking for a cause is called hacktivism.

True
False
Which of the following statements best describes a white-hat hacker?

a.security professional
b. visual
c. artist
ITexper
t
Midterm Quiz 2
What type of ethical hack tests access to the physical infrastructure?
physical access
The security, functionality, and ease of use triangle illustrates which concept? as
security decreases, functionality and ease of use increase
Who uses their hacking skills for destructive purposes?

Cracker
A security audit performed on the internal network of an organization by the

network administration is also known as ______________.
Question
Correct
white-box testing
Reconnaissance is the last phase of hacking.

False
Midterm Exam
Application software are programs designed to make users more productive and
assist them with personal task.
True
An input device that contains keys you press to enter data into a computer.
keyboard
CPU interprets and carries out the basic instructions that operate a computer.
True
1,000,000,000,000 bytes is a terabyte.

True
The control unit is the part of the processor that interprets the instructions.
True
A built-in connection to other documents, graphics, audio files, videos, web

pages, or websites.
hyperlink
Which type of person poses the greatest threat to an organization's security?

disgruntled employee
This is a business conducted electronically.

Question
Correct
eCommerce
The world's largest network is the:

Internet
Data is a collection of unprocessed items, which can introduce text, numbers,

images, audio, and video. True
The _____________ tells the computer how to perform the functions of loading,
storing, and executing an application program and how to transfer data.
operating system
This is the brain of the computer.

CPU
This is a storage device that contains one or more inflexible, circular platters
that magnetically store data, instructions, and information.
hard drive
A pointing device that fits comfortably in the palm of your hand.

mouse
The Computer Bus transmits data to different parts of the machine.

Yes
Match the missing word/details to complete each statement.

LoadUI's easy-to-use graphical interface makes it simple for Answer 1 new users to
setup load scenarios. LoadUI NG Pro
Question
Correct
This is a test designed to increase the number of simultaneous requests on a system past a
Answer 2 stress test
point where performance degrades, possibly even to a point
of complete failure of the system.
Organization wide load and performance testing tool for web Answer 3 applications.
Webload
They need knowledge of tools and in some complex cases, the
Answer 4 programming languages to perform load testing. testers
It is a cloud based, distributed load testing solution that ensures applications run reliably
Answer 5
before, during and after DevOps releases. Flood IO
It is an open source load testing tool and it is a Java platform Answer 6 application.
Apache Jmeter
It is an easy and cost effective way to test websites, mobile/web
Answer 7 applications, web services and API’s. Load Focus
It allows to simulate millions of concurrent users from multiple Answer 8 geographic

locations. cloud
Answer 9
It is a cloud-based, distributed load testing tool.
triscentis flood
This is a planned test to perform a specified number of requests Answer 10 to a system in

order to test the performance of the system. load test
It is fully managed, on-demand load testing tool that allows for Answer 11 completely
hassle free load and stress testing. loadview
Answer 12
It provides advanced testing features with Jmeter at its core.
SmartMeter.io
It is 100% compatible with Apache Jmeter and other open- Blazemeter

Answer 13 source tools like Jenkins and Selenium
Webdriver.
It is a SaaS based performance testing tool powered by Jmeter Answer 14 for the web, API,
REST and mobile app. Octoperf
This is an HP product which can be used as a load testing tool. It can handle and create
Answer 15
thousands of virtual users at the same time. HP Loadrunner
Blazemeter
Question
Correct
Final Quiz 1
Match the term/details to complete each statement.

For _____________, API testing is essential not just for making promises to customers (and
keeping them) but also Answer 1 for gathering data about API performance to
improve development. developers
Most API tests also fall under the umbrella term

“__________________” because their purpose is to Answer 2 determine the overall
performance of a system under specific circumstances. performance tests
Answer 3
______________are the equivalent of unit tests for software.
functional API tests
APIs should be functionally ____________, as well as Answer 4 available, fast, secure

and reliable. correct
API performance tests can be divided into two: functional Answer 5 and
_______________. load tests
Final Quiz 2

It's recommended to run them to verify that deployment Answer 1
doesn't break functionality. functional API tests
various real-world
This is because non-functional constraints such as
Answer 2conditions.
reliability and responsiveness look differently under
API Load Tests
Load
API tests, on the other hand, typically run in equivalent system
Answer 3 production or an ______________.
Every load test works with _____________, typically Answer 4 abbreviated to VU,
which simulate different clients. virtual users
When the deployment works, the tests should return the Answer 5 ____________
everywhere. same results
Question
Correct
Final Exam
_____________ is done as part of the development, build and deploy process;

______________ is done in regular intervals to catch potential problems with the
system while it's in production.
testing, monitoring
To set up an function endpoint test in BlazeMeter you can click

the _______________ button under Create Test and enter your API operation
endpoints. URL/API Test
With Peak Testing you simulate your API at peak times.

True
Soak test is also known as ramping up.

False
The ramp-up ___________ with a single user and grows linearly until
reaching the selected number of users. Starts
Running out of ______________ due to leaks or not cleaning up logs etc. is a

common reason for it. To discover these errors before they happen, you can
soak test.
server memory or disk space
A peak test is typically _____________ a soak test and often includes ramping up
and ramping down to a higher pressure but not as huge as within a stress test.
shorter than
This is testing by the actual users. UAT

tests
Question
Correct
______________ typically includes simple uptime checks as well as

performance or functional tests. API Monitoring
The idea behind this testing approach is to continuously grow the load to find
the point at which your API becomes either too slow, non-responsive or throws
errors.
stress testing

Example, ______________ supports up to 50
VUs on the free plan and tens of millions on
BlazeMeter
Answer 1 paid plans.
Load testing scripts can reuse _____________, Answer 2
executed repeatedly and simultaneously. functional tests
A ______________ can simulate multiple VUs Answer 3 through multithreading.

single machine
You specify the number of VUs, the test script

and the ______________ and all VUs hit your Answer 4
API continuously during the specified time time to run the test
while the testing tool records the performance.
Website tests may include client-side browser network requests.
behavior whereas _____________ only send Answer 5
API tests In
_________________, it is possible to run Answer 6
multiple machines concurrently to simulate an cloud-based test environments even
higher number of VUs, and therefore test more
significant load.
Answer 7
Load tests need proper ______________.
planning
Load testers record them for each run to provide statistics such as average, mean, minimum
and Answer 8 maximum response times that the API provider may want to assert as part
of their ___________. Service-Level Agreement (SLA)
It's also important to consider the use cases of your API and which load and changes in API
Answer 9 request _______________ you are likely to
traffic
experience as a result.
Load tests provide a much broader range of Answer 10
Question
Correct
KPIs
_______________ than functional tests.
The term Load Testing refers to a
Functional testers typically don't care about Answer 11
Answer
standard12
version
response times as long as there is
no timeout
______________ of the performance test.
In BlazeMeter, you can create your
Answer 13_______________.
_______________ in an open source testing
test scenario
tool.
Answer 14
API testing works similar to ______________.
website testing
When performing ________________, you start with a low to medium number of VUs and
Answer 15
then, step by step, increase their stress testing
count.
The idea behind Spike Testing is to _______________ the load in short bursts,
much faster than in a peak test, to see how the system performs to sudden
increases who flatline again. Increase
When performance testing, you can call a single URL, or multiple URLs in
succession. True
hese are the times during which you expect a higher load.
peak test
The idea behind ______________ is that sometimes a system seems to perform

as expected under a particular load and then, all of a sudden, it stops working
without any changes in traffic. Soak Testing
A soak test is a load test that runs with a high but non-critical number of VUs for
a long time, from several hours to multiple days.
True
Question 1
Question
Correct
Complete
An input device that contains keys you press to enter data into a computer.
Select one:
a. hardware
b. number keys
c. software
d. keyboard
Your answer is correct.
Question 2
Complete
This is a business conducted electronically.
Select one:
a. E-Banking
b. Encoding
c. Scanning
d. eCommerce
This is the brain of the computer.

Question
Correct
Select one:
a. RAM
b. CD
c. CPU
d. ROM
Question 4
Complete
1,000,000,000,000 bytes is a terabyte.
Select one:
True
False
Question 5
Complete
CPU interprets and carries out the basic instructions that operate a computer.
Select one:
True
False
6
Which type of person poses the greatest threat to an organization's security?
Select one:
a. conservative employee
Question
Correct
b. disgruntled employee
c. conservative
d. traditional employee
Question 7
Complete
The control unit is the part of the processor that interprets the instructions.
Select one:
a. true
b. false
Question 8
Complete
Data is a collection of unprocessed items, which can introduce text, numbers, images, audio, and video.
Select one:
True
False
9
The Computer Bus transmits data to different parts of the machine.
Select one:
a. yes
Question
Correct
b. no
c. maybe
Question 10
Complete
A built-in connection to other documents, graphics, audio files, videos, web pages, or websites.
Select one:
a. animation
b. delete
c. scatter
d. hyperlink
Question 11
Complete
A pointing device that fits comfortably in the palm of your hand.
Select one:
a. USB
b. mouse
c. CD-ROM

Question
Correct
12
Application software are programs designed to make users more productive and assist them with
personal task.
Select one:
True
False
Question 13
Complete
The _____________ tells the computer how to perform the functions of loading, storing, and executing
an application program and how to transfer data.
Select one:
a. network system
b. operating system
c. manufacturing factory
14
Mark 13.00 out of 15.00
Match the missing word/details to complete each statement.
LoadUI's easy-to-use graphical interface makes it simple for new users to setup load scenarios. LoadUI NG Pro
They need knowledge of tools and in some complex cases, the programming languages to testers
perform load testing. triscentis flood
It is a cloud-based, distributed load testing tool.

Question
Correct
This is a planned test to perform a specified number of requests to a system in order to test
the performance of the load test system.
It is 100% compatible with Apache Jmeter and other open-source tools like Jenkins and Selenium
Webdriver. Blazemeter
It is a cloud based, distributed load testing solution that ensures applications run reliably before,
during and after
Flo
od IO DevOps releases.
It provides advanced testing features with Jmeter at its core. Apache Jmeter
Organization wide load and performance testing tool for web applications. Webload
It is a SaaS based performance testing tool powered by Jmeter for the web, API, REST and Octoperf
mobile app. SmartMeter.io
It is an open source load testing tool and it is a Java platform application. Load Focus
It is an easy and cost effective way to test websites, mobile/web applications, web services and API’s.
This is an HP product which can be used as a load testing tool. It can handle and create thousands of
virtual users at
HP
Loadrunner the same time.
It is fully managed, on-demand load testing tool that allows for completely hassle free load and stress
testing. loadview
This is a test designed to increase the number of simultaneous requests on a system past a
point where performance stress test degrades, possibly even to a point of complete failure of the
system.
It allows to simulate millions of concurrent users from multiple geographic locations. cloud
Your answer is partially correct.

You have correctly selected 13.
15
The world's largest network is the:
Select one:
Question
Correct
a. Google
b. Internet
c. Website
Question 16
Complete
This is a storage device that contains one or more inflexible, circular platters that magnetically store
data, instructions, and information.
Select one:
a. hard drive
b. application program
c. software
d. ROM
Ssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss
ssssssssssssssssssss
An applications health can be measured by the number of threads that are running and currently active.
a. thread counts
Question
Correct
This has to do with the number ofSQL statements that are handled by cached data instead of
expensive I/O operations.
c. Hit Ratios 
All are common activities of performance bottlenecks except one.
a. Software Enhancement 
This _____________ adopted for performance testing can vary widely but the objective for performance
tests remain the same.
b. methodology 
It has to do with returning unused memory back to the system.
c. Garbage Collection 
The IT expert should understand the details of the hardware, software and _________________ used
during testing before beginning the testing process.
a. network configurations 
This is when the code that is not from the current working set is called up from elsewhere and retrieved
from a disk.
Question
Correct
a. Hard Page Faults 
This shows the bits per second used by a network interface.
b. Memory Use 
This refers to the amount of physical memory available to process on a computer.
a. Memory Use 
This is the average number of read and write requests queued for the selected disk during a sample
interval.
a. Disk Queue Length 
These referred to the number of pages written to or read from the disk in order to resolve hard page
faults.
d. Page Faults 
These are monitored to determine what wait times can be cut down when dealing with the how fast
data is retrieved from memory.
b. Rollback Segment 
Question
Correct
This should be very quick or else, the user has to wait too long and they lose interest.Select one:a. start
up
This is the rate of a computer or what the network can receive a request per second. Select one:a.
Rollback Segment
Question 15CorrectMark 1.00 out of 1.00Question 16CorrectMark 1.00 out of 1.00Proper loading
includes goals and constraints for throughput, _____________ and resource allocation. It is also
necessary to identify project success criteria outside of these goals and constraints.
b. response times 
The number of bytes a process has allocated that can't be shared among other processes. These are
used to measure memory leaks and usage.
d. Private Bytes 
This is when either coding errors or hardware issues cause a decrease of throughput under certain
loads.
c. bottlenecking 
This refers to an amount of time processor spends executing non-idle threads.
d. Processor Usage 
Question
Correct
The key to fixing a ________________ issue is to find the section of code that is causing the slowdown
and try to fix it there.Select one:a. server issue
A software product suffers from this when it cannot handle the expected number of users or when it
does not accommodate a wide enough range of users.
d. poor scalability 
This referred to the time from when a user enters a request until the first character of the response is
received.
b. Response Time 
This is an amount of time when the disk is busy executing a read or write request.
c. Disk Time 
The key to fixing a bottlenecking issue is to find the section of code that is causing the slowdown and
delete it entirely.
FALSE
This is normally the initial time it takes an application to start.
c. long load time

Question
Correct
Select the Invalid recording modes supported by QTP
High-level Recording mode
Utility to measure the timing delays between transactions, we use
services
The Run Analog function is used to run
Tracks
Can a transaction contain another transaction ?
yes
Which Options (Settings) are NOT part of run -time settings dialog box ?
Reports
Consider the QTP Script below
Window("Calculator").WinObject("8").Click 21,6
Question
Correct
Window("Calculator").WinObject("WinObject").Click 14,13
In which mode is the script recorded ?
Low Level Recording mode
Identify the corelation function
web_reg_save_param
You are a LoadRunner expert consultant and have been assigned to a client that needs to performance
test an application that has not yet been released. How can you obtain information about the
application anticipated load?
a. Consult with the business experts to determine the anticipated load
During the analysis of a scenario, you realize that the hits per second become flat as Vusers continue to
increase. What is likely to cause?
b. A web server connection problem
Select the type of properties used for Smart Identification
Base Filter Properties

Question
Correct
yes
Default Actions generated in a Load Runner Script are
a. Vuser_int Actions, Vuser_end
You are running a 3-tier web application. With which component must the load generator(s)
communicate?
Controller
What is NOT an advantages of using automated load tests over manual load tests?
Increased hardware resources
Which of the following function sends a message to the output window
Ir_output_message
Virtual Objects are used when:-

Question
Correct
a. Standard Objects cannot be recorded due to problems that arise during recording
Consider the QTP Script below:-
On Error Resume Next
What does the above line of code do ?
If an error occurs in the current line of script under execution QTP proceeds ahead to the next step
Which scenario type helps you plan for future growth and provides a safety factor with the application?
Top Time
LR records communication between Client & Server only but does not record screen actions performed
by user
yes
You are meeting a new LoadRunner customer. The application under test is a call center application
used by the customer representatives. The representatives are located in Phoenix, AZ and Columbus,
OH. A large customer base resides in Flagstaff, AZ an
Phoenix, AZ
Question
Correct
The RunAnalog function is used to run
a. Tracks
Which methods can be used to fix Corelation problem ?
All Of The Above
Which of the following is NOT a supported scripting language for Load Runner
a.
.NET
In Analyer, can graphs be corelated /overlayed?
a. YES
What is an external data source?
a.
Purchase order number

Question
Correct
Types of Checks supported by LR
a. All of the Above
What type of scenarios can be created in Load Runner
a. Both
Can Load Runner be integrated with Quality Center and Quick Test Pro (QTP) ?
a. Both Quality Center & QTP
What is an example of a stress test?
a.
Displaying the home page immediately after a marketing promotion has been run
Which of the following is an example of a missing resource?
An External Action
Which component of LR will be used play back a script in multi-user mode ?

Question
Correct
Controller
When analyzing a technical aspect of a system under test, which group is a helpful source of
information?
Application experts
Which LoadRunner component runs the vuser that generates the load?
a. Load Generator/host
Which Options (Settings) are available for scheduling a scenario ?
a. All of the Above
Browsers supported by Load Runner -
a. All of the Above
Which performance test objective is met when determining the cause of performance degradation?
Bottleneck identification
Question
Correct
Select valid recording modes in LR
Both
Define -Think Time
emulates real life think times taken by user
Which statement is an example of a conceptual goal?
The application's update function should still work under heavy load
What is the LoadRunner term that describes the time a user pauses between steps?
Think time
What is the first stage of load testing process?
Plan the load test
Does Analog Recording mode, records exact mouse and keyboard operations ?
yes
Question
Correct
Which tool is used to manage and maintain a scenario?
Controller
Which file type has an extension .1rr?
Results
Which term defines the end-to-end measurement of time when one or more steps are completed?
Transaction.
What is the first indication of a performance problem?
b. The end user experiences higher than expected response time
Which of the following is NOT a component of LR ?
Performance Enhancer
Which file defines the Vusers to execute, the number of Vusers to run, the goals of the test, the
computer that hosts the Vusers, and the
Question
Correct
conditions under which to run the load test?
Scenario
What are the main types of service level agreements available in the Controller and Analysis?
a. Per Time Interval
Corelation problem is caused by
Dynamic values sent by server
What does a breakpoint do?
Pauses test execution at the specified step, before executing that step
Bottlenecks, This is a type of performance testing conducted to evaluate the behavior of a system
when the load is suddenly and substantially increased.
Spike Testing, This is a type of performance testing conducted to evaluate the behavior of a system
when a significant workload is given continuously.

Question
Correct
Endurance Testing, This is a type of software testing that intends to determine how a system
performs in terms of responsiveness and stability under a certain load.
Performance Testing, Its response time, reliability, resource usage, and scalability do matter.
Software Application's Performance, This is a type of performance testing conducted to evaluate the
behavior of a system at increasing workload.
Load Testing, This determines the maximum user load the software application can handle.
Scalability, This determines if the application is stable under varying loads. → Stability, This determines
whether the application responds quickly. → Speed, This is a type of performance testing conducted to
evaluate the behavior of a system at or beyond the limits of its anticipated workload.
This is a type of performance testing conducted to evaluate the behavior of a system at or beyond the
limits of its anticipated workload. stress testing

Question
Correct
faster than human users. - Repeat
Enables you to verify the following features of Application Under test -
Functional Testing
Stage 6 GUI Testing Workflow - Analyzing Run Results and Reporting
Defects
It Click the Support button to open links to UFT for GUI Testing support -
Support Area
Stage 2 of GUI Testing Workflow - Preparing the Testing Infrastructure
thereby eliminating human error - Reliable
New or Open buttons after selecting a test, component or solution name. -

Question
Correct
Recent Test/Components and Recent Solutions
series of tests. - Manual Testing
It Click the Community button to open news about UFT GUI Testing. -
Community Area
application reacts after repeated execution of the same operations -
Repeatable
It is a windows- based application. - Flight Reservation
Benefits of Automated Testing where you can program sophisticated tests
that bring out hidden information - Programmable
Question
Correct
- True
UFT stands for Unitied Functinal Testing. - False
It is a browsers-based application. - Mercury Tours
covers every feature in your Web site or application. - comprehensive
It Click the Links button to open links to the UFT for GUI Testing Help. -
Links Area
Testing. - False
Mercury Tools is a browsers-based application. - False
To verify if the AUT performs the designated tasks, you automate a series
of tests that run without human intervention. - Automated Testing

Question
Correct
- Results Location
Functional Testing
It Click the Links button to open links to the UFT for GUI Testing Help. -
Links Area
properties. - Insight Recording
It Click the Community button to open news about UFT GUI Testing. -
Community Area
It is a browsers-based application. - Mercury Tours

Question
Correct
faster than human users. - Fast
It is a windows- based application. - Flight Reservation
Functional Testing
Functional Testing
Input Parameters tabs. - Options - Recent Test/Components and Recent
Solutions
Stage 2 of GUI Testing Workflow - Preparing the Testing Infrastructure

Question
Correct
Functional Testing
It Click the Support button to open links to UFT for GUI Testing support. -
Support Area
Functional Testing
Stage 6 GUI Testing Workflow - Analyzing Run Results and Reporting
Defects
Benefits of Automated Testing where you can program sophisticated tests
that bring out hidden information - Programmable

Question
Correct
Item refers to the object in the AUT that was interacted with. - True
- Results Location
Begins the run sessions - Run
Manual Testing enables you to verify the following features of Application
Under test. - False
you automate a series of tests that run without human intervention. -
True
Refers to data that you specify for the operation performed on the object. -
Value

Question
Correct
sessions - True
Low Recording recognizes objects based on their appearance rather than
their native properties. - False
Various Name is the test or component to run. - False
Refers to the object in the AUT that was interacted with. - Item
the object. - False
Input Parameters tabs. - Options
Dynamic Content is the process of unique identifiers. - True
Comprehension can build a suite of tests that covers every feature in your
Web site or application. - False

Question
Correct
mouse click on an object so that UFT may use that additional data. - Low
level recording
It is a normal object based recording mode for UFT recording sessions. -
Default
The test or component to run. You can select any open item from the drop-
down list. - Test Name
properties. - Insight Recording
session. This is also called the method. - Operation
Data driven functionally without which users could not operate. - FALSE
Question
Correct
Input Parameters tabs. - Options
Refers to data that you specify for the operation performed on the object. -
Value
thereby eliminating human error - Reliable
application reacts after repeated execution of the same operations -
Repeatable
Begins the run sessions - RUN

Question
Correct
mouse click on an object so that UFT may use that additional data. - Low
level recording
session. This is also called the method. - Operation
Functional Testing
proper settings on an
and begin the test by hitting the

Question
Correct
Record button. - IN-PLATFORM PROMPT
The
allows for both keyword-driven and object-based
automated functional testing commands, but also provides manual
scripting tools for users who want a more hands-on approach. - PLATFORM
, users open a new project and select what
To create a new _______________, users open a new project and select what type of app (Windows
desktop, mobile or web) the test is to be performed on. - TEST SCRIPT
The platform will automatically record any ______________ or keyword-based on-screen actions and
commands undertaken by the user. - INTERACTIVEIf a test for a ________________is selected, HPE
Unified Functional Testing allows users to install or push their developed mobile apps to real
Android,iOS or Windows devices and interact with both the device and the app from within the
platform. - MOBILE APPThe test or component to run. You can select any open item from the drop-down
list. - Test NameBenefits of Automated Testing where you can build a suite of tests that covers every
feature in your Web site or application. - comprehensiveRecognizes objects based on their appearance
rather than their native properties. - Insight RecordingIt is a normal object based recording mode for
UFT recording sessions. - Default Refers to the object in the AUT that was interacted with. - Item
Midterm Quiz 1 // Midterm LAB Quiz 1Base Filter properties is the most fundamental properties of a
particular test object class. - TRUEYou can insert a synchronization point that instructs the tool to wait
until the Update Order button's enabled property equals. - TRUEThis is the identifier that indicates the
order which the order appears in the application code. - IndexThis is the identifier that applicable only to
web applications. - Creation TimeYou can insert Exist or Wait statements that instruct the UFT for GUI
Testing tool to wait until an object exists or to wait a specified amount of time before continuing the
Question
Correct
test. - True Synchronization is used to instruct UFT for GUI Testing to wait for the application process to
complete before proceeding to the next step in the test. - True Class is the selected name of the
selected object. - FALSEOptional Filter properties is the other properties that can help identify objects of
a particular class. - TRUE You can insert a synchronization point, which instructs the UFT for GUI Testing
tool to pause the test until an object property achieves the value you specify. - TRUETest object name is
the test object class of the selected object. - FALSEThis is the identifier which object appears within the
frame or dialog box. -LocationYou can modify the default amount of time that the UFT for GUI Testing
tool waits for a Web page to load. - True You can add an object to the object repository directly from the
Object Spy.- TrueThe most fundamental properties of a particular test object class. - None of the
choicesYou can insert a synchronization point that instructs the UFT for GUI Testing tool to wait until the
Update Order button is enabled. - True Property name enables you to specify the property value for
which UFT forGUI Testing should wait before continuing to the next step in the test. - False You can not
delete objects from the object repository. - False To update an object, perform the following steps: - All
of the choicesWhen you run a test, your application might not always respond with the same speed. -
True All test objects are stored in the object repository. - True File content checkpoint check the image
in a document generated during arun session. - False All test objects are stored in the object repository.
- True XML checkpoint checks the data content of XML documents. - True Base Filter properties is the
most fundamental properties of a particular test object class. - True Constant is a value that is defined or
generated externally and is retrievedduring a run session. - False You can check the object property
values in your application using standard checkpoints. - True Run on all rows test with iterations using
one rows in the global data table.- False A dynamic checkpoint is a checkpoint that can check for any
value generated at run time. - True Environment parameters enable you to insert a value in the test
from an environment variable list. - TRUEThe View Configuration Options dialog box enables you to
define a selected value as a constant or a parameter. -TRUEn Input parameter is the value of a property
captured from the AUT during test execution. - False Optional Filter properties is the other properties
that can help identify objects of a particular class. - True When you run a test, your application might not
always respond with the same speed. - TRUEYou can insert a synchronization point, which instructs the
UFT for GUI Testing tool to pause the test until an object property achieves the value you specify. -
TRUERegular Expression option enables you to specify a constant value using a regular expressions. -
True Input parameters enable you to replace a static recorded value in a step with a placeholder for a
dynamic value. - True Run one iteration only using the first row in the global data table. - TRUEYou can
modify the default amount of time that the UFT for GUI Testing tool waits for a Web page to load. -
TRUEInput parameter names and their values are located in the Data Table. - TRUE You can add an
object to the object repository directly from the Object Spy.- TRUEMidterm Quiz 2 // Midterm LAB Quiz
2Table checkpoint checks the property values of an image. - FALSECheckpoints can be inserted even
while you are in recording mode. - TRUEText checkpoints the text string is displayed within a defined
area in a window based application according to specified criteria. - FALSEYou can check the object
property values in your application using standard checkpoints. - TRUEIndicates that the value of the
property is currently an environment variable parameter. - None of the choicesIt matches one to any
number of occurrences of the preceding character. - PLUSIt is a value of a property captured from the
the AUT during the test execution. - Output ParameterEnables you to define a new internal environment
variable and add it to the list. - ADDThe environment variable xml file to load and use when your test
runs. - FILEFile content checkpoint check the image in a document generated during arun session. -
FALSEIt is a checkpoint that can check for any value generated at run time. - None of the choicesXML
Question
Correct
checkpoint checks the data content of XML documents. - TRUESpecial character Period in UFT matches
any single character. - TRUECheckpoints include the following type EXCEPT. - JAVAIndicates that the
value of the property is currently a parameter. - None of the choicesBrackets matches a range of
character. - True Names and their values are located in the Data Table. - Input Parameter Page
checkpoint checks the characteristics of a web page. - True Accessibility checkpoint identifies area of a
web site to check for section 598 compliancy. - False It checks the contents of a data based accessed by
an application. - Database CheckpointYou can insert a synchronization point, which instructs the UFT for
GUI Testing tool to pause the test until an object property achieves the value you specify. - TRUEClass is
the selected name of the selected object. - FALSECheckpoints can be inserted even while you are in
recording mode. - TRUEEnvironment parameters enable you to insert a value in the test from an
environment variable list. - TRUEProperty name enables you to specify the property value for which UFT
forGUI Testing should wait before continuing to the next step in the test. - FALSETest object name is the
test object class of the selected object. - FALSEAccessibility checkpoint identifies area of a web site to
check for section 598 compliancy. - FALSEYou can insert Exist or Wait statements that instruct the UFT
for GUI Testing tool to wait until an object exists or to wait a specified amount of time before continuing
the test. - TRUEYou can insert a synchronization point that instructs the tool to wait until the Update
Order button's enabled property equals. - TRUEYou can not delete objects from the object repository. -
FALSEBrackets matches a range of character. - TRUESpecial character Period in UFT matches any single
character. - TRUEYou can modify the default amount of time that the UFT for GUI Testing tool waits for a
Web page to load. - True Text checkpoints the text string is displayed within a defined area in a window
based application according to specified criteria. - FASLEAll test objects are stored in the object
repository. - TRUEYou can insert a synchronization point that instructs the UFT for GUI Testing tool to
wait until the Update Order button is enabled. - TRUETable checkpoint checks the property values of an
image. - FALSESynchronization is used to instruct UFT for GUI Testing to wait for the application process
to complete before proceeding to the next step in the test. -TRUEWhen you run a test, your application
might not always respond with the same speed. - TRUEPage checkpoint checks the characteristics of a
web page. - TRUEFINAL Quiz 1 // FINAL LAB Quiz 1The Browser Navigation Timeout allows 90 seconds
for a page to load by default. - FALSEDouble Action Test is an action in UFT for GUI Testing refers to a
set of steps that are run as a group. - FALSEWhen the Web add-in is loaded, the Test Settings displays a
Web tab. - TRUEBefore a record session is initiated, you must set the record and run settings for the
Web application that you want to test. - TRUEIt is one that can be called multiple times by the local test.
- None of the choicesWhen a local data sheet is used, values specific to an action appear in the action
data sheets that are available to that action only. - TRUEAn action can be divided into logical sections
such as the Login process, Create New Order process, and Logoff process. - Test with Multiple
ActionsReusable action is one that can be called multiple times by the local test. - TRUEDuring your
regular working process, you can add checkpoints to any test. - TRUE Checkpoints do not need to be
managed in single tests. - FASLEA Web application generally uses a greater variety of objects as
compared to a Windows-based application. - TRUEGlobal Sheet enables you to insert data that applies
only to that action. - FALSEResult Details is a high-level results overview report, containing general
information about the test. - TRUEAn action inside another action. - NestedIt is a reusable action stored
with another test. - ExternalAfter a test is recorded, run the test to verify the test results. - True
Captured Data is a still image of the state of your application at a particular step. - True Non-reusable
action is one that can be called only in the local test. - True Global Sheet enables you to insert data that
applies only to that action. - Global sheetA Web design uses Web classes and Web object. - False
Question
Correct
Reusable action is one that can be called multiple times by the local test. - TRUEEnables you to view the
properties of a checkpoint object, the same way as you do in the relevant Checkpoint Properties dialog
box. - Object Detailsarea (Checkpoint Objects)It is a reusable action stored with another test. -
ExternalGlobal Sheet enables you to insert data that applies only to that action. - Global sheetThe name
of the test object as it appears in the object repository (read-only). - Test Object to IdentifyHighlights the
visual relation between all related objects and the objects matching the test object to identify (main UFT
window is hidden). - PreviewIt is one that can be called multiple times by the local test. - None of the
choicesCheckpoints do not need to be managed in single tests. - FALSE An action inside another action. -
NESTEDBefore a record session is initiated, you must set the record and run settings for the Web
application that you want to test. - TRUEEnables you to associate one or more shared object repositories
with one or more actions in a test. - Dialog BoxA Web design uses Web classes and Web object. -
FALSEThe details of the visual relation for the selected related object. - Relation detailsAfter a test is
recorded, run the test to verify the test results. - TRUEEnables you to open multiple shared object
repositories and modify them as required. - Object Repository Manager dialog boxDisplays the image
that UFT for GUI Testing uses to identify the object in the application. - Test Object Image area(Insight
Test Objects)Enables you to view the properties of an output value object, the same way as you do in
the relevant Checkpoint Properties dialog box. - Objects Details area(Output Value Objects)Enables you
to define related objects according to their distance or hierarchical location relative to the object to
identify. - Distance and hierarchyAn action can be divided into logical sections such as the Login process,
Create New Order process, and Logoff process. - Test with Multiple ActionsFINAL Quiz 2 // FINAL LAB
Quiz 2 Multiple shared object repositories can store in data sheets. - FALSEUse a shared object
repository, when: You are creating tests or components using keyword-driven methodologies (not by
recording). - TRUEThe Object Management area enables you to view the properties and property values
used to identify a test object during a run session. - FASLEBefore you begin creating tests, you must
determine exactly what you want to test in your application. - TRUEThe details of the visual relation for
the selected related object. - Relation details Enables you to define related objects according to their
distance or hierarchical location relative to the object to identify. - Distance and hierarchyThe name of
the test object as it appears in the object repository (read-only). - Test Object to IdentifyEnables you to
associate one or more shared object repositories with one or more actions in a test. - Dialog BoxEnables
you to view the properties of a checkpoint object, the same way as you do in the relevant Checkpoint
Properties dialog box. - Object Detailsarea (Checkpoint Objects)Displays the image that UFT for GUI
Testing uses to identify the object in the application. - Test Object Image area(Insight Test Objects)You
can also merge objects from the local object repository directly to a shared object repository that is
associated with the same action or component. - True You can use the shared object repository for
multiple tests. - TRUEDuring your test creation, you must determine exactly what you want to test in
your application. - FALSEHighlights the visual relation between all related objects and the objects
matching the test object to identify (main UFT window is hidden). - PreviewEnables you to view the
properties of an output value object, the same way as you do in the relevant Checkpoint Properties
dialog box. - Objects Details area(Output Value Objects)When you open an object repository, it opens in
a read-only format by default. - TRUEEnables you to open multiple shared object repositories and
modify them as required. - Object Repository Manager dialog boxYou can open as many shared object
repositories as you want. - TRUEThe Object Repository System enables you to open multiple shared
object repositories and modify them as needed. - FASLEYou can use only one shared object repositories.
- FALSEThe Browser Navigation Timeout allows 90 seconds for a page to load by default. - FALSEMultiple
Question
Correct
shared object repositories can store in data sheets. - FALSE Double Action Test is an action in UFT for
GUI Testing refers to a set of steps that are run as a group. - FALSECaptured Data is a still image of the
state of your application at a particular step. - TRUEThe Object Repository System enables you to open
multiple shared object repositories and modify them as needed. - False You can use only one shared
object repositories. - False You can use the shared object repository for multiple tests. - TRUEYou can
open as many shared object repositories as you want. - TRUEGlobal Sheet enables you to insert data
that applies only to that action. - TRUEThe Object Management area enables you to view the properties
and property values used to identify a test object during a run session. - FALSEDuring your test creation,
you must determine exactly what you want to test in your application. - FASLEUse a shared object
repository, when: You are creating tests or components using keyword-driven methodologies (not by
recording). - TRUEA Web application generally uses a greater variety of objects as compared to a
Windows-based application. - TRUEWhen you open an object repository, it opens in a read-only format
by default. - TRUEBefore you begin creating tests, you must determine exactly what you want to test in
your application. - TRUEAfter creating tests, you must determine exactly what you want to test in your
application - FALSEDuring your regular working process, you can add checkpoints to any test. -
TRUENon-reusable action is one that can be called only in the local test. - TRUE Which tab in the Debug
Viewer pane allows you to view or change variables orproperties? - WATCH
Question 1 This is normally the initial time it takes an application to start. Answer: c. long load time
Question 2 This should be very quick or else, the user has to wait too long and they lose interest.
Answer: c. response time Question 3 A software product suffers from thiswhen it cannot handle the
expected number of users or when it does not accommodate a wide enough range of users. Answer: a.
poor scalability Question 4 This is when either coding errors or hardware issues cause a decrease of
throughput under certain loads. Answer: b. bottlenecking Question 5 The key to fixing a bottlenecking
issue is to find the section of code that is causing the slowdown and delete it entirely. Answer: False
Question 6 All are common activities of performance bottlenecks except one. Answer: b. Software
Enhancement
Question 7 This _____________ adopted for performance testing can vary widely but the objective for
performance tests remain the same. Answer: a. methodology Question 8 The IT expert should
understand the details of the hardware, software and _________________ used during testing
beforebeginning the testing process. Answer: a. network configurations Question 9 Proper loading
includes goals and constraints for throughput, _____________ and resource allocation.It is also
necessary to identify project success criteria outside of these goals and constraints. Answer: c. response
times Question 10 The key to fixing a ________________ issue is to find the section of code that is
causing the slowdown and try to fix it there. Answer: b. bottlenecking Question 11 This refers to an
amount of time processor spends executing non-idle threads. Answer: a. Processor Usage Question 12
This refers to the amount of physical memory available to process on a computer. Answer: c. Memory
Use Question 13
Question
Correct
This is an amount of time when the disk is busy executing a read or write request. Answer: d. Disk Time
Question 14 This shows the bits per second used by a network interface. Answer: b. Bandwidth Question
15 The number of bytes a process has allocated that can't be shared among other processes. These are
used to measure memory leaks and usage. Answer: a. Private Bytes Question 16 The refers to the
amount of virtual memory used. Answer: a. Committed Memory Question 17 These referred to the
number of pages written to or read from the disk in order to resolve hard page faults. Answer: a.
Memory Pages Question 18 This is when the code that is not from the current working set is called up
from elsewhere and retrieved from a disk. Answer: d. Hard Page Faults Question 19 This is the average
number of read and write requests queued for the selected disk during a sample interval. Answer: d.
Disk Queue Length Question 20 This referred to the time from when a user enters a request until the
first character of the response is received. Answer: a. Response Time Question 21 This is the rate of a
computer or what the network can receive a request per second. Answer: a. Throughput Question 22
This has to do with the number ofSQL statements that are handled by cached data instead of expensive
I/O operations. Answer: a. Hit Ratios Question 23 These are monitored to determine what wait times
can be cut down when dealing with the how fast data is retrieved from memory. Answer: d. Top Waits
Question 24 An applications health can be measured by the number of threads that are running and
currently active. Answer: c. thread counts Question 25 It has to do with returning unused memory back
to the system
It matches one to any number of occurrences of the preceding character. Plus Input parameter names
and their values are located in the Data Table. True Special character Period in UFT matches any single
character. True Indicates that the value of the property is currently a parameter. None of the choices
Optional Filter properties is the other properties that can help identify objects of a particular class. True
You can check the object property values in your application using standard checkpoints. True Property
name enables you to specify the property value for which UFT for GUI Testing should wait before
continuing to the next step in the test. False You can modify the default amount of time that the UFT for
GUI Testing tool waits for a Web page to load. True
File content checkpoint check the image in a document generated during a run session. False Brackets
matches a range of character. True Test object name is the test object class of the selected object. False
You can insert Exist or Wait statements that instruct the UFT for GUI Testing tool to wait until an object
exists or to wait a specified amount of time before continuing the test. True A dynamic checkpoint is a
checkpoint that can check for any value generated at run time. True Names and their values are located
in the Data Table. Input Parameter This is the identifier that indicates the order which the order appears
in the application code. Index You can insert a synchronization point that instructs the tool to wait until
the Update Order button's enabled property equals. True Synchronization is used to instruct UFT for GUI
Testing to wait for the application process to complete before proceeding to the next step in the test.
True You can add an object to the object repository directly from the Object Spy. True Base Filter
properties is the most fundamental properties of a particular test object class. True n Input parameter is
the value of a property captured from the AUT during test execution. False Run on all rows test with
Question
Correct
iterations using one rows in the global data table. False The View Configuration Options dialog box
enables you to define a selected value as a constant or a parameter. True XML checkpoint checks the
data content of XML documents. True The environment variable xml file to load and use when your test
runs. File Input parameters enable you to replace a static recorded value in a step with a placeholder for
a dynamic value. True Page checkpoint checks the characteristics of a web page. True You can not delete
objects from the object repository. True You can insert a synchronization point, which instructs the UFT
for GUI Testing tool to pause the test until an object property achieves the value you specify. True You
can add an object to the object repository directly from the Object Spy. True All test objects are stored
in the object repository. True To update an object, perform the following steps: all of the choices You
can insert a synchronization point that instructs the UFT for GUI Testing tool to wait until the Update
Order button is enabled. True You can insert a synchronization point that instructs the tool to wait until
the Update Order button's enabled property equals. True This is the identifier that indicates the order
which the order appears in the application code. index
Test object name is the test object class of the selected object. False This is the identifier which object
appears within the frame or dialog box. Location Base Filter properties is the most fundamental
properties of a particular test object class. True Class is the selected name of the selected object. False
This is the identifier that applicable only to web applications. Creation Time You can insert Exist or Wait
statements that instruct the UFT for GUI Testing tool to wait until an object exists or to wait a specified
amount of time before continuing the test. True Synchronization is used to instruct UFT for GUI Testing
to wait for the application process to complete before proceeding to the next step in the test. True The
most fundamental properties of a particular test object class. None of the Choices You can modify the
default amount of time that the UFT for GUI Testing tool waits for a Web page to load. True Optional
Filter properties is the other properties that can help identify objects of a particular class. True When
you run a test, your application might not always respond with the same speed.True Property name
enables you to specify the property value for which UFT for GUI Testing should wait before continuing to
the next step in the test. False Checkpoints can be inserted even while you are in recording mode. True
File content checkpoint check the image in a document generated during a run session. False Indicates
that the value of the property is currently a parameter. None of the choices Accessibility checkpoint
identifies area of a web site to check for section 598 compliancy. False Checkpoints include the following
type EXCEPT. Java Indicates that the value of the property is currently an environment variable
parameter. None of the Choices It matches one to any number of occurrences of the preceding
character. Plus It is a checkpoint that can check for any value generated at run time. None of the choices
It checks the contents of a data based accessed by an application. Database Checkpoint You can check
the object property values in your application using standard checkpoints. True Page checkpoint checks
the characteristics of a web page. True It is a value of a property captured from the the AUT during the
test execution. Output Parameter Text checkpoints the text string is displayed within a defined area in a
window based application according to specified criteria. False Special character Period in UFT matches
any single character. True XML checkpoint checks the data content of XML documents. True The
environment variable xml file to load and use when your test runs. File Names and their values are
located in the Data Table. Input Parameter Enables you to define a new internal environment variable
Question
Correct
and add it to the list. Add Table checkpoint checks the property values of an image. False Brackets
matches a range of character.
Choose the valid syntax to call Action 1 ( from Action 0) with input parameter "action_in" and store the
output in a variable "MyVariable"
RunAction 'Action1', oneIteration, Parameter("action_in"), MyVariable
Can Actions inserted as "Call to Action" be modified by the test engineer?
NO
By default a Datable contains :-
One Action Sheet and One Global Sheet
Do statement always end with
Loop
Can we use all standard Microsoft Excel features like Formulae, Formatting , Sorting etc in QTP
DataTable ?
yes
Question
Correct
The Index Property value of Occurrence of the first object in source code is
Are Ordinal Identifiers used when Mandatory and Assistive properties used by QTP are not enough to
identify Object?
yes
Text Output Value - a) outputs property value of any object b) outputs text string appearing in AUT c)
outputs part of displayed text appearing in AUT
both b & c
Are Nested Actions Call to one Action from Another ?
yes
Select the Browsers NOT Supported by QTP ?
safari
Action Iteration is :-
Question
Correct
Number of times action would be executed every global iteration
Does the "Information" Toolbar in QTP 10.x give the Syntax Errors if any in the script ?
yes
Which one is the default data type of QTP
string
To terminate the script execution, during running, QTP uses
exit run
To use the non-standard windows object, we can go for
Virtual objects
Does Index based ordinal identifier indicates the order in which the object appears in the parent window
frame or dialog box relative to other objects?
no
Question
Correct
Synchronization Point is used :-
To delay QTP execution until Application Under Test (AUT) attains certain status
Select the Invalid type of Ordinal Identifiers Used by QTP
time based
When a test is run in update mode, what is updated?
The object descriptions
Parameterization of all Test data in a script can be done using
Data Driver
In a Per - Action (Local) Repository Action 1 and Action 2 in the same test script would have different
object repositories?
yes
Checkpoint which is being used for verifying the web page with W3C standard is
Question
Correct
Accessibility checkpoint
"Call to Copy" of an action can be inserted only for reusable actions ?
no
Is Smart Identification is invoked when QTP cannot recognize an object using mandatory , assistive and
ordinal properties ?
yes
BITMAP Checkpoint checks the property values of an image ?
no
Object Spy can be used to
identify the properties used for identification of objects
Can Test-Data in "Action Sheet" of Data Table be used from one action to another ?
no
Question
Correct
Can Checkpoints be parameterized ?
yes
Are Assistive properties used when mandatory properties are enough to identify an object ?
yes
What is the correct order of events in Test Script Creation ?
Plan , Record , Enhance , Debug
Object Repository is available in 3 modes viz. a) Per-Action Object Repository b) Shared Object
Repository, c) Unshared Object Repository
Both a & b
Is the Shared ( Global ) Action Repository the default repository in QTP ?
no
What is *.tsr file in QTP ?

Question
Correct
Object Repository Files
"Active Screen" Technology in QTP gives
Screenshots of Application Under Test (AUT)
Does Location based ordinal identifier indicates the order in which object appears in the application
code relative to other objects?
no
Results Table (results of a test) is available in which following locations ?
Test Results Folder
Does QTP support Data Driven Framework ?
yes
Select the environments in which Creation Time ordinal identifier is used
web
Question
Correct
The file extension of Shared object repository file is
tsr
Select Case statement is end with
end select
*.mts file contains :-
Sequence and iterations of Actions to be executed
Select INVALID Checkpoint Type from the following
Object Checkpoint
Which scripting language is used in QTP ?
VB Script
For identification of any object the choice of ordinal identifier selected can be modified in the Object
Identification Window? a.YES
Question
Correct
The feature of selecting different values of test data at run-time is called
Parameterization
The Share Action Repository is preferable when
The Application Under Test is Dynamic with respect time
Action Sheet (in Data Table) of an action inserted as "Copy of an Action" is editable only from the test
from which they were created ? no
Select the valid types of Actions in QTP a) Nested Actions b) Shared Actions c) External Actions d)
Reusable Actions a.both a & d
Method to To count the no of rows in a table
getrowcount
Users using different browsers to see their application’s performance.
Browser Emulation
Navigate to find out that that our desired script basic script in this case appears in the Group Name
column of the Scenario Groups pane.
Question
Correct
Locate the desired script
You can configure LoadRunner to run Vusers in a Load Generator machine without the need for the user
to manually log in to the machine. For more information, see “Configuring User Login Settings”
true
Select the script and click the “Details” button to launch the “Group Information” dialog box.
script
The number of times a user repeats a set of actions.
run logic
For creating & using a new Load Generator: When the desired load generator does not appear in the list,
select “Add” from the Load Generator Name list to launch the “Add New Load Generator” dialog box.
true
To install LoadRunner, use the Windows Add/Remove Programs utility. Alternatively, you can run the
setup.exe file located in the root directory of the LoadRunner installation disk, select LoadRunner Full
Setup, and then select the Remove option in the Setup Wizard.
true
Question
Correct
Enables you to run VuGen with all of the HP Service Test capabilities.
Service Test Add-in
The level of information that you want to gather during the test.
log
Controller Controls the execution of scenarios and Vusers. Includes the online monitors which monitor
and display information about the test execution.
true
For automatically detecting user-defined errors.
Content Check
If your version of LoadRunner is supplied with a plug and you have not already installed the plug, do so
now by inserting it in the parallel port
true
The time to wait before repeating the action.

Question
Correct
TruePacing
To repair LoadRunner, run the setup.exe file located in the root directory of the LoadRunner installation
disk, select LoadRunner Full Setup, and then select the Repair option in the Setup Wizard.
false
Testing the Load Generator Connection:Involves instructing the Controller to make attempts to connect
to the load generator machine
true
Installs the SiteScope server used for the Siebel Web Server, SAP CCMS, SAP Portal, and Server Resource
monitors
SiteScope Installation
Users using different network connections such as modem, DSL, and cable.
Speed Simulation
Installs a component that enables you to create and run scripts, written in your standard development
environment, in the application's native language.
IDE Add-ins
Question
Correct
Enables you to run standalone installations of the following applications: Analysis, Load Generator, MI
Listener, Monitors Over Firewall, and Virtual User Generator (VuGen).
Standalone Applications
Provides you with the tools to create a custom protocol to run load tests on a previously unsupported
application
HP Performance Validation SDK
Scheduling of scenario in schedule pane of the Controller window: In real world scenario, the actual
users do not log on and off the system exactly at the same time.
true
The time the user stops to think between steps.
Think Time
For using already available Load Generator: Click the “Load Generators” button In the Design view to
launch the “Load Generators” dialog box
true
Provide the desired number of Vusers intended to be created in the group.

Question
Correct
Vusers Quantity
Setting the schedule actions definitions in Actions Grid: As described in the following Global Schedule
Actions Grid following four definitions Initialize ,Start Vusers,Duration,Vusers
false
Users using different browsers to see their application’s performance.
Browser Emulation
Navigate to find out that that our desired script basic script in this case appears in the Group Name
column of the Scenario Groups pane.
Locate the desired script
You can configure LoadRunner to run Vusers in a Load Generator machine without the need for the user
to manually log in to the machine. For more information, see “Configuring User Login Settings”
true
Select the script and click the “Details”button to launch the “Group Information”dialog box.
script
Question
Correct
The ramp-up with a single user and grows linearly until reaching the selected number of users.
a. stuts
The idea behind Spike Testing is to the load in short bursts, much faster than in a peak test, to see how
the system performs to sudden increases who flatline again
increase
To set up an function endpoint test in BlazeMeter you can click the button under Create Test and enter
your API operation
URL,'APlTest
A soak test is a load test that runs with a high but non-critical number of VLIS for a long time, from
several hours to multiple days.
True
When performance testing, you can call a single URL or multiple URLs in succession.
True
Question
Correct
When is the Parameterization required ?
Copy, paste, or move an object from a shared object repository to the local object repository When
object hierarchy is changed
To compares the values of the specified property during a run session with the values stored for the
same test object property within the test ? checkpoint
By default, how many no of tables would be there in a script?
The method used to get data from HTML Table is ?
GetCellData (Row,Col)
Question
Correct
What is the role of lservc file in UFT?
It is a library file to provide user defined functions
The standard timing delay for windows application is
20 seconds
Where can you associate a function library to a test ?
Test Settings
The file which is used for recovering from the runtime errors known as ?
qrs
Question
Correct
Input or Output action parameter name are not case sensitive.
false
Constant “2” with the reporter statement returns
done
A Checkpoint checks that a text string is displayed within a defined area in a Windows application is ?
text area
The result of the checkpoints can be stored in a variable
yes
Question
Correct
Parameterization generally involves
All of the Above
Which statement type can you use in your test to wait for a condition to be met and fail the test if it
times out before meeting the condition?
standard checkpoint
Where do you mark an action as reusable?
Action Properties
input or Output action parameter name are not case sensitive.
false
Question
Correct
By default, the all actions in QTP are
non – reusable
n the Associated Repositories tab of the Action Properties dialog box, the ......object repository is always
listed first and cannot be moved down the priority list or deleted ?
local
The key that is used to Start/End analog recording mode ?
. SHIFT+ALT+F3
By default, how many no of tables would be there in a script ?

Question
Correct
The method used for sending information to the test results ?
Reporter.reportevent()
If the same object is present in the local and shared repository, QTP will refer which one?
Both Shared and Local
getrowcount
Action Iteration is ?
Question
Correct
The ....... is not accessible as a separate file ?
local object repository
When you export a captured movie to a file, the file is saved as ________ file.
fbr
Among the following recording modes, which method uses both the objects and mouse coordinates
lowlevel
If the same object is present in the local and shared repository, QTP will refer which one ?Both Shared
and Local
Question
Correct
When is it best to use a programmatic description?
when you work With properties and methods of an object not in the object repository
To invoke the function which does not return any value, we can use
CALL function name
The file which is used for recovering from the run time errors has an extension
QRS
Where can you associate a function library to a test?
Test Settings
Question
Correct
After running a test that contains both input and output parameters, where can the results of an output
parameter be found
Run-time Data Table
Which one is not true about “Call of action”
Tester can edit the script
Using 'Save Test with resources', UFT saves a copy of any external action used. true
Which UFT feature confirms that the application is functioning correctly ? checkpointb
Question
Correct
In VB Script functions, which one is false among the following
Variables may not be declared before use
What is the shortcut key that is used for a Standard Checkpoint ? f12
If you have a Virtual Object Collection stored on your machine, and you don’t want to use it what you
must do? Disable Virtual Objects in General Options
Where do you mark an action as reusable ? Action Properties

Question
Correct
Constant “2” with the reporter statement returns
Done
Which is the odd one out ? mta
In a Per – Action (Local) Repository Action 1 and Action 2 in the same test script would have different
object repositories?
yes
Can we use all standard Microsoft Excel features like Formulae, Formatting , Sorting etc in QTP
DataTable ?
no
Question
Correct
Are Ordinal Identifiers used when Mandatory and Assistive properties used by QTP are not enough to
identify Object? yes
The feature of selecting different values of test data at run-time is called Parameterization
Parameterization of all Test data in a script can be done using Data Driver
Select Case statement is end with end select
Does QTP support Data Driven Framework ? yes

Question
Correct
Object Spy can be used to
identify the properties used for identification of objects
“Active Screen” Technology in QTP gives
Screenshots of Application Under Test (AUT)
Results Table (results of a test) is available in which following locations ?
Test Results Folder
Are Assistive properties used when mandatory properties are enough to identify an object ?
yes
Question
Correct
Select the Browsers NOT Supported by QTP ?
Safaric
Does Index based ordinal identifier indicates the order in which the object appears in the parent window
frame or dialog box relative to other objects?
no
*.mts file contains :-
Sequence and iterations of Actions to be executed
What is *.tsr file in QTP ?
Object Repository Files

Question
Correct
Object Repository is available in 3 modes viz.a) Per-Action Object Repositoryb) Shared Object
Repository,c) Unshared Object Repository
Both a & b
The Index Property value of Occurrence of the first object in source code is
Do statement always end with
loop
Choose the valid syntax to call Action 1 ( from Action 0) with input parameter “action_in” and store the
output in a variable “MyVariable”
Question
Correct
RunAction 'Action1', oneIteration, Parameter(“action_in”), MyVariable
Text Output Value -a) outputs property value of any objectb) outputs text string appearing in AUTc)
outputs part of displayed text appearing in AUT
both b & c
Synchronization Point is used :-
To delay QTP execution until Application Under Test (AUT) attains certain status
What is the correct order of events in Test Script Creation ?
Plan , Record , Enhance , Debug

Question
Correct
Which scripting language is used in QTP ?
VB Script
To use the non-standard windows object, we can go for
Virtual objects
getrowcountc
The Share Action Repository is preferable when
The Application Under Test is Dynamic with respect time

Question
Correct
Which one is the default data type of QTP
string
Can Test-Data in “Action Sheet” of Data Table be used from one action to another ?
NO
Is Smart Identification is invoked when QTP cannot recognize an objectusing mandatory , assistive and
ordinal properties ?
yes
Action Iteration is :-

Question
Correct
Can Actions inserted as “Call to Action” be modified by the test engineer?
no
By default a Datable contains :-
One Action Sheet and One Global Sheet
BITMAP Checkpoint checks the property values of an image ?
no
Question
Correct
Can Checkpoints be parameterized ?
yes
Does the “Information” Toolbar in QTP 10.x give the Syntax Errors if any in the script ?
YES
The standard timing delay for web based application is
60 seconds
Are Nested Actions Call to one Action from Another ?
yes
Question
Correct
Select the environments in which Creation Time ordinal identifier is used
Web
Virtual Objects are used when:-
Standard Objects cannot be recorded due to problems that arise during recording
Which of the following is NOT a supported scripting language for Load Runner
.NET
What are the main types of service level agreements available in the Controller and Analysis?
Per Time Interval

Question
Correct
Which statement is an example of a conceptual goal?
The application’s update function should still work under heavy load
Which scenario type helps you plan for future growth and provides a safety factor with the application?
Top Time
In Analyer, can graphs be corelated /overlayed?
yes
You are a LoadRunner expert consultant and have been assigned to a client that needs to performance
test an application that has not yet been released. How can you obtain information about the
application anticipated load?
Question
Correct
Consult with the business experts to determine the anticipated load
Which performance test objective is met when determining the cause of performance degradation?
Bottleneck identification
What is the first indication of a performance problem?
The end user experiences higher than expected response time
What is the first stage of load testing process?
Plan the load test

Question
Correct
yes
Consider the QTP Script below:-On Error Resume NextWhat does the above line of code do ?
If an error occurs in the current line of script under execution , QTP proceeds ahead to the next step
Select the type of properties used for Smart Identification
Base Filter Properties
Tracks
Which term defines the end-to-end measurement of time when one or more steps are completed?
Question
Correct
Transaction.
Which file type has an extension .lrr?
Results
Which of the following is an example of a missing resource?
An External Action
Define -Think Time
emulates real life think times taken by user
Identify the corelation function

Question
Correct
web_reg_save_param
Tracksb
Which of the following function sends a message to the output window
lr_output_message
During the analysis of a scenario, you realize that the hits per second become flat as Vusers continue to
increase. What is likely to cause?
A web server connection problem

Question
Correct
What is NOT an advantages of using automated load tests over manual load tests?
Increased hardware resources
What is the LoadRunner term that describes the time a user pauses between steps?
Think time
Default Actions generated in a Load Runner Script are
Vuser_int, Actions, Vuser_end
Which Options (Settings) are NOT part of run -time settings dialog box ?
ReportsFeedbackYour
Question
Correct
Which of the following is NOT a component of LR ?
Performance Enhancer
Can Load Runner be integrated with Quality Center and Quick Test Pro (QTP) ?
Both Quality Center & QTP
Select the Invalid recording modes supported by QTP
High-level Recording mode
You are running a 3-tier web application. With which component must the load generator(s)
communicate?
Controllerc
Question
Correct
Does Analog Recording mode, records exact mouse and keyboard operations ?
yes
Utility to measure the timing delays between transactions, we use
services
Types of Checks supported by LR
All of the Above
Which tool is used to manage and maintain a scenario?
controller
Question
Correct
Which methods can be used to fix Corelation problem ?
All Of The Above
Browsers supported by Load Runner -
All Of The Above
What does a breakpoint do?
Pauses test execution at the specified step, before executing that step
LR records communication between Client & Server only but does not record screen actions performed
by user
Question
Correct
yes
You are meeting a new LoadRunner customer. The application under test is a call center application
used by the customer representatives. The representatives are located in Phoenix, AZ and Columbus,
OH. A large customer base resides in Flagstaff, AZ an
Cincinnati, OH
Select valid recording modes in LR
Bothc
Corelation problem is caused by
Dynamic values sent by server

Question
Correct
Which component of LR will be used play back a script in multi-user mode ?
Controller
What type of scenarios can be created in Load Runner
Bothc
Consider the QTP Script belowWindow(“Calculator”).WinObject(“8”).Click

21,6Window(“Calculator”).WinObject(“WinObject”).Click 14,13In which mode is the script recorded ?
Low Level Recording mode
When analyzing a technical aspect of a system under test, which group is a helpful source of
information?
Application experts
Question
Correct
What is an example of a stress test?
Displaying the home page immediately after a marketing promotion has been run
yes
Which LoadRunner component runs the vuser that generates the load?
Load Generator/host
Question
Correct

Question
Correct

Ltestng

Uploaded by

Document Informationclick to expand document information

Document Informationclick to expand document information

Copyright:

Available Formats

Ltestng

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ltestng

Uploaded by

Copyright:

Available Formats

[ANSWER] question- (answer is in left, question is in right)

Mark 1.00 out of 1.00

Mark 1.00 out of 1.00

Mark 1.00 out of 1.00

Mark 1.00 out of 1.00

Mark 1.00 out of 1.00

Mark 1.00 out of 1.00

Mark 1.00 out of 1.00

Mark 1.00 out of 1.00

Mark 1.00 out of 1.00

Mark 1.00 out of 1.00

You can use only one shared object repositories.

When you open an object repository, it opens in a read-only format by

Multiple shared object repositories can store in data sheets. False

Enables you to open multiple shared object repositories and modify

Object Repository Manager dialog box

Mark 1.00 out of 1.00

There is a manual script writing involved when creating automated

Mark 1.00 out of 1.00

It is a browsers-based application. Mercury Tours

Default is a normal object based recording mode for UFT recording

Low Recording recognizes objects based on their appearance rather

Automated testing is to verify if the AUT performs the designated tasks,

Refers to the object in the AUT that was interacted with.

It is a normal object based recording mode for UFT recording sessions.

Begins the run sessions

Mark 1.00 out of 1.00

faster than human users.

Captured Data is a still image of the state of your application at a

The Browser Navigation Timeout allows 90 seconds for a page to load

A Web design uses Web classes and Web object.

Enables you to define a new internal environment variable and add it to

Indicates that the value of the property is currently an environment

Accessibility checkpoint identifies area of a web site to check for section

Mark 1.00 out of 1.00

Table checkpoint checks the property values of an image False

Page checkpoint checks the characteristics of a web page True

Text checkpoints the text string is displayed within a defined area in a

Various Name is the test or component to run.

Mark 1.00 out of 1.00

It is a reusable action stored with another test. External

Mark 1.00 out of 1.00

object repositories and modify them as needed

 Micro Focus Unified Functional Testing Correct

A Web application generally uses a greater variety of objects as compared to a

A Web design uses Web classes and Web object.

Mark 1.00 out of 1.00

All test objects are stored in the object repository.

 Test with Multiple Actions Correct

An action inside another action.

ANSI C functions allow you to add:CommentsControl flow statementsConditional

Mark 1.00 out of 1.00

Begins the run sessions

Brackets matches a range of character.

Business processes that are crucial in day-to-day operations

 Mission-Critical Process Correct

Check stability of system under extended periods of load

Lines between // are comments