XCMG Truck Crane

XCT80_Y

80t 45.5 m 60.9 m

Max. Lifting Capacity – 80 ton

Boom – 45.5 m; Jib – 16 m
Main Components - XCT80_Y
XCMG truck crane XCT80_Y has the maximum Brakes
lifting capacity of 80 t. Its longest boom length is Service braking: Foot pedal is operated using
45.5 m and the maximum lifting height is 60.9 m double-circuit air pressure brake. 1st circuit acts on
(including the jib). the wheels of 1st and 2nd axles, and 2nd circuit acts
Chassis on the wheels of 3rd and 4th axles.

Frame Parking brake: Spring-loaded brake acts on wheels

of axles 2,3 and 4.
It is designed and manufactured by XCMG. It is
made of high strength steel with fully covered Auxiliary brake: Engine compression and exhaust
walking surface and anti-torsion box-typed brake, is safe and reliable and prolongs the brake
structure. lining service life.

Outriggers Steering
Mechanical steering mechanism is with a hydraulic
Four outrigger are arranged with 5th jack made
booster.
available. It is arranged in H-shape and are
hydraulically controlled by control levers. Electrical system
Double-stage outrigger beam is adopted. There is an 24V DC, two sets of 12 V battery in series.
outrigger control station located at each side of the Generator: 28±0.3 V-70 A
chassis and there is a level gauge on each
Safety devices
control station.
Hydraulic balance valve, hydraulic relief valve, LMI,
The outrigger movements can be simultaneously or
spring centering system for control levers, lowering
separately controlled from any side of the chassis.
limiter for preventing wire rope from over releasing,
There is a check valve fitted in each outrigger
anti-two block at boom head for preventing wire
cylinder and a double-way hydraulic valve fitted in
rope from overwinding, free sliding and slewing
each jack cylinder. Outrigger float diameter is φ450
locking are standard.
mm. Reaction force of outrigger at max. lifting load is
700kN. Double-way hydraulic valve are available while
Engine winch monitoring device, tri - coloured light bar,
beacon lamp, beacon lamp for slewing, angle
Weichai Power,WP12.460E62, in line, water cooled,
EJ@E?=PKN UAHHKSNAŃA?PEJCI=NGEJC >=?GQL?=IAN=
four-stroke, supercharging, high pressure common
and ABS are optional.
rail with rated power of 247 kW / 1900 rpm and
max. torque of 1600 rpm Nm/1000-1400 rpm,
Compliant of BS-IV emission standard. Superstructure
Fuel tank capacity is 320L. Hydraulic system
Transmission Variable pump driven by chassis engine is used for
Mechanical transmission 10JSD140TB with manual hoisting, elevating and telescoping operations. It
ŃATE>HA OD=BP ?KJPNKH  BKNS=N@ OLAA@ =J@ has a load sensing proportional multi-way change
2-reverse speed with a synchronizer. valve with impact resistance valve, cavitation - proof
valve integrated and air-cooled hydraulic oil
Axles radiator. Tank capacity is 972L.
High strength axle makes the machine reliable. Operator’s cab
Suspensions Luxurious new steel cab with safety glass and sun
Rubber spring suspensions with V-type push rods shield are used for windows, electrically operated
are adopted for rear suspension system leading to door window lifters, adjustable seats, electrically
improved chassis stability and reduced tyre wear. adjustable mirrors, steering wheel adjustable in
height and angle, liquid crystal display and radio
Tyres cassette player are equipped. Heater and air
12.00R24 low noise during traveling and strong conditioner are standard.
bearing capacity .
Main Components - XCT80_Y
A swing-out door is equipped. The cab features a Under lung jib
new ergonomic seat design with back rest Two-section box-type jib is stowed under boom.
=@FQOPIAJP4ELANO=NAłPPA@BKNPDASEJ@ODEAH@=J@ One jib section is 9.8 m and the total length of two
roof window. Standard controls and indicators are jib sections is 16 m.The jib has offset angles of
ergonomically arranged in the cab. Extension of 5°,15° and 30°.
control lever is in mechanical control system.
Single top
Operating mode
It is installed at the boom top for single line
Pilot hydraulic control is used for controlling the operation. Its lifting performance is the same as that
superstructure. All crane movements are controlled for the boom but the maximum lifting load cannot
by hydraulic pump and proportional valve are exceed 4.5t.
through two control levers at left and right sides.
Main and auxiliary winch system Operational Safety Instructions
Hydraulic control is used for speed regulation. The 1. The total rated loads given in the rated load
system is driven by a hydraulic motor through a charts are the maximum lifting capacities when
planetary gear reducer with a normally closed PDA ?N=JA EO OAP QL KJ łNI =J@ HARAH CNKQJ@ 
brake, a balance valve and a grooved drum is which includes the weight of the hook block and
equipped. slings. The weight of above-mentioned devices
Slewing system should be deducted to correctly calculate the
load weight.
Four-point contact-ball slewing ring is driven by the
planetary gear reducer of slewing mechanism which 2. The working radius shown in the rated load
is driven by a hydraulic motor and can continuously charts is the radius when the load is lifted off the
slew at 360°. Power control and free slewing ground and it is the actual value including
function as well as step-less speed regulation are HK=@A@>KKI@AŃA?PEKJ
=R=EH=>HA1DANAEO=HOK=DKNJOSEP?DłPPA@KJPDA 3. A lifting operation is permissible only when the
slewing control lever. wind force is below grade 5 (instantaneous
Elevating system wind speed is 14.1 m/s, wind pressure is
A front support double-acting hydraulic cylinder is 125N/m2).
equipped for elevating operation with a balance 4. Before beginning the lifting operation, the
R=HRAłPPA@ operator should know the weight of the load to
Combined counterweight be lifted and its working range. Then select
proper working conditions. Never operate the
Total weight is 5.3t. Two counterweight
crane beyond the limit shown in the chart. Use
?KJłCQN=PEKJOKBP=J@P=NA=R=EH=>HA
the lower value from the chart when the boom
Hook block length or working radius is between the range of
80t hook block and 4.5t hook block are available values.
while 35t hook block is an optional. 5. Observe the boom angle limit. Never operate the
crane with the boom angle beyond the
Boom and jib system recommended limit even if the load is not being
Boom carried. Otherwise, the crane will tip.
Comprises of welded one basic boom and four 6. The boom length given in the rated load charts
telescoping boom sections with U-shaped should accord with the telescoping code of
cross-section and adopts anti-distortion design. It boom sections.
is made of high strength structural steel,
single-cylinder plus ropes telescoping system.
Boom length is 11.83m 45.5m.
Swing-away jib
Two-section lattice jib, welded structure.
It Three offset
angles of 0°, 15° and 30°.
Dimensions - XCT80_Y

The medium and large tonnage products increase the full-scale shape and size parameter map, and the correspond-
ing weight tail radius of gyration A: Approach angle B: Departure angle C: plane height on the frame D: vehicle height
E: vehicle width R1: minimum turning radius of the arm head (the main arm and the jib are determined according to
the size) R2: Minimum turning radius of the body R3: minimum turning radius H: minimum ground clearance.

A B C D E F R1 R2 R3 R4 H

12.00R24 22° 13° 1725 3770 1690 14085 14500 14100 13500 12000 305
1A?DJE?=H0LA?Eł?=PEKJO

Category Item Unit Parameter

Max. total rated lifting capacity t 80

Min. rated working radius m 3

Turning radius Counterweight mm 4050

at turntable tail
Winch mm 4190

Base boom kN.m 2587

Max. load
Fully - extended boom kN.m 1286
moment
Fully - extended boom + jib kN.m 706
Main
performance Longitudinal m 6.5
Outrigger span
Lateral m 7.9

Base boom m 12.2

Hoist height Fully - extended boom m 46

Fully - extended boom + jib m 60.9

Base boom m 11.83

Boom length Fully - extended boom m 45.5

Fully - extended boom + jib m 61.5

Jib offset angle ° 0, 15, 30

Boom raising time s Ł

Boom fully extending time s Ł

Max. slewing speed r / min —

Retracting s Ł
Outrigger
Working beam
speed Outrigger Extending s Ł
extending and
retracting time Retracting s Ł
Outrigger
jack Ł
Extending s

Hoisting speed Main winch m / min —

(single line, 4th layer,
no load) Auxillary winch m / min —
1A?DJE?=H0LA?Eł?=PEKJO

Travel Configuration
Category Item Unit Parameter

Dimensions length×width×height mm 14085×2800×3770

Dimensions Wheel base mm 1470+4500+1350

Track (Front / rear) mm 2316 / 2063

Front / rear overhang mm 2375 / 2700

Front / rear extension mm 1690 / 0

Total vehicle mass in travel configuration Kg 46000

Weight 1st axle and 2nd axle Kg 10000

Axle load
3rd axle and 4th axle Kg 13000

Engine model —— WP12.460E62

Rated power / rpm kW / (r/min) 247 / 1900

Power

Max. output torque / rpm Nm / (r/min) 1600 / 1000 - 1400

Max. travel speed km / h 50 / 90

Min. stable travel speed km / h 2 3

Min. turning diameter m Ł

ŁĠ0SEJC=S=UFE>
Min. turning diameter at boom tip m
ŁĠ2J@ANHQJCFE>
Travel
Min. ground clearance mm 305

Approach angle ° 22

Departure angle ° 13

Braking distance (at 30 km / h) m Ł

Max. gradeability % —

Fuel consumption per 100 km L 38

Exterior noise level dB(A) ŁŁ

Noise
Noise level at seated position dB(A) Ł
 Description of Symbols - XCT80_Y
General symbols

Superstructure Jib offset angle Tyres

Lifting capacity Hoist height with jib Outriggers

360° 360° operation of the boom

Boom length Hook block
with 5th jack down

Radius Chassis Counterweight

Boom angle Axle Winch

360°
Hoist height with boom Driving speed 360° operation of the boom

Fixed jib length Gradeability

Weight
Axle 1 2 3 4 Total weight
t 10 10 13 13 46

Hook No. of lines Weight (kg) Dimensions(mm) Remarks

80t 13 616 1325x544x537 Single hook, standard
35t 10 403 1334x544x419 Single hook, optional
4.5t 1 100 (Swing - away jib) 536x298x298 Single hook, standard

Working speeds

12.00R24 2 - 50 40%

Drive Working speed Max. single line pull Rope diameter/ length

1 0-145 m / min, single line, 4th layer 6.5t 20mm / 230m

2 0-90 m / min, single line, 4th layer 6.5t 20mm / 145m

360°
0-2 r / min

Approx. 55s for boom elevation

from - 1° to 81°
Approx. 110s for boom extension
from 11.4m to 43.5m
Boom / Jib combinations - XCT80_Y

Telescopic boom Jib

T : 45.5m
T : 11.83 - 45.5m
J : 9.5m / 16m
Lifting Capacities - XCT80_Y

50m

T 45.5m

40

T 45.5m

T 41.3m
T 39.19m
T 37.1m
30
T 35m
T 32.87m
T 30.8m
T 28.7m
T 26.56m
T 24.5m
20
T 22.4m
T 20.25m
T 18.1m
T 16.04m

T 11.83m
10

0 10 20 30 40m
 Lifting Capacities - XCT80_Y
11.83 - 45.5m 6.545m×7.9m 5.3t
360°

m 11.83 16.04 18.1 20.25 22.4 24.5 26.56 m

3 80 3
3.5 75 55 3.5
4 65 55 4
5 52 50 31 40 30 29.5 5
6 44 42 31 36 30 27.2 30 6
7 36.5 35 30.5 32.5 30 25.1 28 7
8 27.5 27.2 28.8 26.9 29 23.6 25.5 8
9 21.7 21.4 23.7 21.1 23 22.4 22.6 9
10 17.4 19.5 17.1 18.9 20.3 18.4 10
12 12.1 14.1 11.8 13.5 14.8 13.1 12
14 10.6 8.6 10.1 11.3 9.7 14
16 6.2 7.8 9 7.4 16
18 6.1 7.3 5.7 18
20 5.9 4.4 20
22 3.4 22
24 24
26 26
28 28
30 30
32 32
34 34
11.83-45.5m 6.545m×7.9m 5.3t
360°

m 28.7 30.8 32.87 35 37.1 39.19 41.3 45.5 m

3 3
3.5 3.5
4 4
5 5
6 29.2 19.9 22.5 6
7 28.3 18.5 21.4 18.4 14.0 15.5 7
8 26.5 17.2 19.8 17.4 13.6 15.3 11.6 9.8 8
9 24 16.2 18.4 16.4 12.9 14.5 11.6 9.6 9
10 19.7 15.2 17.1 15.6 12.0 13.6 11.5 9.6 10
12 14.2 13.5 13.8 14.0 10.8 12.2 10.7 9.6 12
14 10.8 11.8 10.4 11.3 9.6 10.9 9.8 8.9 14
16 8.5 9.4 8.1 8.9 8.5 8.5 8.6 8.2 16
18 6.7 7.6 6.4 7.2 7.6 6.8 7.5 7 18
20 5.4 6.3 5 5.8 6.5 5.5 6.1 5.8 20
22 4.4 5.2 4 4.8 5.5 4.4 5.1 4.7 22
24 3.6 4.4 3.2 4 4.6 3.6 4.2 3.9 24
26 3.7 2.5 3.3 3.9 2.9 3.5 3.2 26
28 1.9 2.7 3.3 2.3 3 2.6 28
30 2.2 2.8 1.9 2.5 2.1 30
32 2.4 1.5 2 1.7 32
34 1.7 1.4 34
Lifting Heights - XCT80_Y
J 16m 60m
30º
15º

J 16m

50
J 9.5m

T 44.5m

40

30

20

10

0 10 20 30 40 50m

Lifting Capacities - XCT80_Y

45.5m 9.5m/16m 6.545mx7.9m 5.3t
360º

9.2m 16m
0˚ 15˚ 30˚ 0˚ 15˚ 30˚
80° 4.5 4 3.2 2.9 2.4 1.3 80°
78° 4.2 3.8 3.2 2.9 2 1.1 78°
75° 4 3.7 3 2.8 1.6 1 75°
72° 3.8 3.5 2.7 2.5 1.4 0.9 72°
70° 3.6 3.2 2.6 2.2 1.2 0.9 70°
65° 2.6 2.4 2.2 1.6 1 0.9 65°
60° 1.7 1.6 1.5 1.2 0.9 0.8 60°
55° 1.2 1.1 1 0.9 0.8 0.7 55°
50° 0.7 0.7 0.7 50°
 SCHWING - STETTER
ALWAYS CLOSE Jammu

TO THE CUSTOMER. Jalandhar

Haridwar
Mohali
Uttarakhand
Delhi
Manesar Nepal
Gurugram
Jaipur Bhutan

Lucknow Siliguri
Kota Patna Guwahati
Ahmedabad Bangladesh
Bhopal Jabalpur Hooghly
Silchar
Ranchi
Kolkata
Indore
Rajkot

0=HAO,Bł?A Surat Nashik

Raipur
Nagpur Bhubaneshwar
Resident Engineer Mumbai

Resident Engineer with Spares Depot Pune Vijayawada Visakhapatnam

Goa
Hubli Hyderabad Rajahmundry
Service Centre with Spares Depot
Anantapur Nellore
Dealership Support Mangalore

Customer Training Center

Kozhikode Bengaluru
Chennai
Coimbatore
Trichy
Cochin
Madurai

Sri Lanka

An ISO 9001 : 2015 Company

CORPORATE OFFICE : F 71 - 72, SIPCOT Industrial Mumbai : 620/621, Nirmal Lifestyle Corporate Centre, New Delhi : 19, Okhla Industrial Estate,
Park, Irungattukottai, Sriperumbudur Taluk, 6thŃKKN )0*=NC *QHQJ@Ġ4AOP *QI>=E Phase III, New Delhi - 110 020.
Kancheepuram District, Tamil Nadu - 602117. Tel : 022 25624863 / 64, 30718300, 71378100 Tel : 011 30928500 Fax : 011 30928530
Tel : 044 - 71378100 / 106 Fax : 022 25624865 / 66 Email : newdelhi@schwingstetterindia.com
Email : chennai@schwingstetterindia.com Email : mumbai@schwingstetterindia.com
Mohali : D 91-PH-VII, Industrial Area, Mohali,
Kolkata : Y6, Block EP, Sector V,Electronics Complex, Hyderabad : No.8-2-268/1/C, Plot 2, Road 3, Punjab - 160 055. Tel : 0172 3957500 / 3957501
Salt Lake City, Kolkata-700091.Tel: 033 40823300 Arora Colony, Banjara Hills, Hyderabad-500034. Email : chandigarh@schwingstetterindia.com
Email : kolkata@schwingstetterindia.com Tel: 040 33555588 / 47848601 Fax: 040 23731770
Email : hyderabad@schwingstetterindia.com
Bengaluru : No 138-B,"UDAYAGIRI COMPLEX", Jammu : C/o. VRL Logistics Limited, Plot No. 19,
3rd Phase,KIADB Industrial area, Transport Nagar, Narwal, Jammu - 180006.
Visakhapatnam : Plot No.54, IDA - Block 'D',
Peenya, Bangalore - 560058. Tel : 099060 35941.
Expansion, Auto nagar, Visakhapatnam - 530 012.
Tel: 080-68114300
Tel : 09100061783 Fax: 0891 2706063
Email : bangalore@schwingstetterindia.com
Bhubaneshwar : Plot No:182, Naharkanta, Rudrapur,
Ahmedabad :103, Shivalik Arcade, 100 Ft., T.P Anand Cochin : No.134 / 1404 B, Arakkakadavu Road, Beside Puri Main Canal, NH5, Bhubaneshwar-752101.
Nagar, Satellite Road, Ahmedabad - 380 051. Anchumana, Edappally P.O. Cochin - 682 024. Odisha. Tel : 09078884484 / 85
Tel : 079 71378100 Tel: 0484 - 3355558 / 4055544 Fax: 0484 4506165
Email : ahmedabad@schwingstetterindia.com Email : cochin@schwingstetterindia.com Raipur : NH-6, Opposite Vardhaman Motor,
Kumahari, Dist - Durg, Chhattisgarh - 490042.
Pune : Baner Biz Bay, A Wing, 7th Floor, Tel : 07821 247066
Coimbatore : 2005,Trichy Road, Old Rajalaxmi Mills, Email : sunil.kumar@schwingstetterindia.com
Office No. A-701 & 702, Baner Road,
Near D-Mart, Pune - 411 045. Tel: 020-6718500 Singanallur, Coimbatore-641005.Tel: 0422 3223660
Email : coimbatore@schwingstetterindia.com Guwahati : House No. 161, Jaya Nagar,
Email : pune@schwingstetterindia.com
Six Miles, Khanapara, Guwahati - 781 022.
Patna : C/o. House of Ashok Kumar Rana, Surat : Shop No. 128, First Floor, Aagam Orchid, Tel: 0361 2234738 / 099575 66738
Ground & First Floor, Samridhi Bhawan, TP Scheme No 6, Opp. Shiv Kartik Complex,
Agamkuan Road, Shivaji Colony, Pahari More, Off VIP Road, Nr. Shrungar Building, Nr Nandini 2, Indore ġ-HKP+K /K=@ĠU-=OO
SSI/CAT/XCMG/XCT80_Y/10/2019

Patna - 800007, Bihar. Tel : 09570996702 Vesu, Surat-395007 Tel : 08980002726 Ġ,LL 0EHE?KJ3=HHAU%KQOEJC-NKFA?P 
Email : rajiv.chandra@schwingstetterindia.com Email : ahmedabad@schwingstetterindia.com Rau - 453331, Indore. M.P. Tel : 08085966587
Email : ahmedabad@schwingstetterindia.com
Goa: C/o Agarwal Packers and Movers Limited, Nagpur : C/o Amrut Dairy Farm, No. 118, Opp VCA
Plot No X-1, Verna Industrial Estate, Verna, Stadium, Jamtha,16th KM Milestone, NH-7, Wardha Jaipur : F-551, Road No. 6, Lehar Choraha,
Goa - 403722.Tel: 09820203847 Road, Nagpur - 441108. Tel : 09820203847 3EODS=G=NI=&J@QOPNE=HNA=Ġ3(&NA=
Email : sohit.chakhaiyar@schwingstetterindia.com Email : sohit.chakhaiyar@schwingstetterindia.com Jaipur - 302 013, Rajasthan. Phone: 09672423444

The Data given in this brochure are subject to change without notice.