Revision date: 27/09/2019 Revision: 6 Supersedes date: 05/07/2016

SAFETY DATA SHEET 300J7

100% ACRYLIC WATER BASED EMULSION COATING & PRIMER

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Product name 100% ACRYLIC WATER BASED EMULSION COATING & PRIMER

Product number E27, EP27 & ES27

1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses 100% Water based acrylic coating for a wide range of interior and exterior surfaces.
Please see data sheet or contact our technical team.

1.3. Details of the supplier of the safety data sheet

Supplier Technical Paint Services
Rear of 27 Southcote Road
Bournemouth
Dorset
BH1 3SH
Tel: +44 (0)1202 295570

Contact person enquiries@technicalpaintservices.com

1.4. Emergency telephone number

Emergency telephone +44 (0)1202 295570 (Not 24 Hours)

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Classification (EC 1272/2008)
Physical hazards Not Classified

Health hazards Not Classified

Environmental hazards Not Classified

2.2. Label elements

Hazard statements NC Not Classified

2.3. Other hazards

SECTION 3: Composition/information on ingredients

3.2. Mixtures
Composition comments No classified ingredients, or those having occupational exposure limits, present above the
levels of disclosure.

SECTION 4: First aid measures

4.1. Description of first aid measures

Inhalation Move affected person to fresh air at once. Rinse nose and mouth with water. Get medical
attention if any discomfort continues.

1/6
Revision date: 27/09/2019 Revision: 6 Supersedes date: 05/07/2016

100% ACRYLIC WATER BASED EMULSION COATING & PRIMER

Ingestion Never give anything by mouth to an unconscious person. Do not induce vomiting. Rinse
mouth thoroughly with water. Get medical attention if any discomfort continues.

Skin contact Remove affected person from source of contamination. Remove contaminated clothing. Wash
skin thoroughly with soap and water. Get medical attention if any discomfort continues.

Eye contact Remove any contact lenses and open eyelids wide apart. Wash with plenty of water. Continue
to rinse for at least 15 minutes. Get medical attention if irritation persists after washing.

4.2. Most important symptoms and effects, both acute and delayed
General information No data available on the mixture itself.

4.3. Indication of any immediate medical attention and special treatment needed
Notes for the doctor Treat symptomatically.

SECTION 5: Firefighting measures

5.1. Extinguishing media

Suitable extinguishing media The product is not flammable. Use fire-extinguishing media suitable for the surrounding fire.

5.2. Special hazards arising from the substance or mixture

Hazardous combustion Thermal decomposition or combustion products may include the following substances:
products Carbon dioxide (CO2). Carbon monoxide (CO).

5.3. Advice for firefighters

Protective actions during Cool containers exposed to heat with water spray and remove them from the fire area if it can
firefighting be done without risk.

Special protective equipment Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
for firefighters clothing.

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

Personal precautions Wear protective clothing as described in Section 8 of this safety data sheet.

6.2. Environmental precautions

Environmental precautions Avoid the spillage or runoff entering drains, sewers or watercourses.

6.3. Methods and material for containment and cleaning up

Methods for cleaning up Stop leak if possible without risk. Absorb in vermiculite, dry sand or earth and place into
containers. Flush contaminated area with plenty of water. Avoid the spillage or runoff entering
drains, sewers or watercourses.

6.4. Reference to other sections

Reference to other sections For personal protection, see Section 8. For waste disposal, see Section 13.

SECTION 7: Handling and storage

7.1. Precautions for safe handling

Usage precautions Avoid spilling. Avoid contact with skin and eyes.

7.2. Conditions for safe storage, including any incompatibilities

Storage precautions Store in tightly-closed, original container in a dry, cool and well-ventilated place.

7.3. Specific end use(s)

Specific end use(s) The identified uses for this product are detailed in Section 1.2.

2/6
Revision date: 27/09/2019 Revision: 6 Supersedes date: 05/07/2016

100% ACRYLIC WATER BASED EMULSION COATING & PRIMER

SECTION 8: Exposure Controls/personal protection

8.1. Control parameters

8.2. Exposure controls

Protective equipment

Appropriate engineering Provide adequate ventilation. Avoid inhalation of vapours. Observe any occupational
controls exposure limits for the product or ingredients.

Eye/face protection Eyewear complying with an approved standard should be worn if a risk assessment indicates
eye contact is possible. The following protection should be worn: Chemical splash goggles or
face shield.

Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be worn if
a risk assessment indicates skin contact is possible.

Other skin and body Wear appropriate clothing to prevent any possibility of skin contact.
protection

Hygiene measures Do not eat, drink or smoke when using this product. Use appropriate skin cream to prevent
drying of skin. Promptly remove any clothing that becomes contaminated. Wash promptly if
skin becomes contaminated. Wash at the end of each work shift and before eating, smoking
and using the toilet.

Respiratory protection No specific recommendations. Respiratory protection may be required if excessive airborne
contamination occurs.

SECTION 9: Physical and Chemical Properties

9.1. Information on basic physical and chemical properties

Appearance Viscous liquid.

Colour White.

Odour Characteristic.

Odour threshold Not available.

pH pH (concentrated solution): 9.0 - 9.5

Melting point Not available.

Initial boiling point and range 100°C

Flash point Not applicable.

Evaporation rate Not available.

Flammability (solid, gas) Not available.

Upper/lower flammability or Not available.

explosive limits

Vapour pressure Not available.

Vapour density Not available.

Relative density 1.36 - 1.41

Solubility(ies) Soluble in water.

3/6
Revision date: 27/09/2019 Revision: 6 Supersedes date: 05/07/2016

100% ACRYLIC WATER BASED EMULSION COATING & PRIMER

Partition coefficient Not available.

Auto-ignition temperature Not available.

Decomposition Temperature Not available.

Explosive properties Not available.

Oxidising properties Not available.

9.2. Other information

Other information No additional information

Volatile organic compound This product contains a maximum VOC content of 1 g/l.

SECTION 10: Stability and reactivity

10.1. Reactivity
Reactivity There are no known reactivity hazards associated with this product.

10.2. Chemical stability

Stability Stable at normal ambient temperatures.

10.3. Possibility of hazardous reactions

Possibility of hazardous No potentially hazardous reactions known.
reactions

10.4. Conditions to avoid

Conditions to avoid Avoid excessive heat for prolonged periods of time.

10.5. Incompatible materials

Materials to avoid Avoid contact with the following materials: Oxidising agents. Strong acids. Strong bases

10.6. Hazardous decomposition products

Hazardous decomposition Fire creates: Carbon monoxide (CO). Carbon dioxide (CO2).
products

SECTION 11: Toxicological information

11.1. Information on toxicological effects

Toxicological effects No data on the mixture itself.

Inhalation Gas or vapour in high concentrations may irritate the respiratory system. Symptoms following
overexposure may include the following: Coughing.

Ingestion May cause discomfort if swallowed.

Skin contact Liquid may irritate skin.

Eye contact Vapour or spray in the eyes may cause irritation and smarting.

SECTION 12: Ecological Information

Ecotoxicity Not regarded as dangerous for the environment.

12.1. Toxicity
Toxicity No data on the mixture itself. Do not allow to enter drains or watercourses.

12.2. Persistence and degradability

4/6
Revision date: 27/09/2019 Revision: 6 Supersedes date: 05/07/2016

100% ACRYLIC WATER BASED EMULSION COATING & PRIMER

Persistence and degradability No data available.

12.3. Bioaccumulative potential

Bioaccumulative potential No data available on bioaccumulation.

Partition coefficient Not available.

12.4. Mobility in soil

Mobility No data available.

12.5. Results of PBT and vPvB assessment

Results of PBT and vPvB This product does not contain any substances classified as PBT or vPvB.
assessment

12.6. Other adverse effects

Other adverse effects None known.

SECTION 13: Disposal considerations

13.1. Waste treatment methods

General information The generation of waste should be minimised or avoided wherever possible. Do not allow to
enter drains or watercourses.

Disposal methods Dispose of waste to licensed waste disposal site in accordance with the requirements of the
local Waste Disposal Authority.

SECTION 14: Transport information

General The product is not covered by international regulations on the transport of dangerous goods
(IMDG, IATA, ADR/RID).

14.1. UN number
Not applicable.

14.2. UN proper shipping name

Not applicable.

14.3. Transport hazard class(es)

No transport warning sign required.

14.4. Packing group

Not applicable.

14.5. Environmental hazards

Environmentally hazardous substance/marine pollutant

No.

14.6. Special precautions for user

Not applicable.

14.7. Transport in bulk according to Annex II of MARPOL and the IBC Code
Transport in bulk according to Not applicable.
Annex II of MARPOL 73/78
and the IBC Code

SECTION 15: Regulatory information

5/6
Revision date: 27/09/2019 Revision: 6 Supersedes date: 05/07/2016

100% ACRYLIC WATER BASED EMULSION COATING & PRIMER

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
EU legislation Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18
December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) (as amended).
Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16
December 2008 on classification, labelling and packaging of substances and mixtures (as
amended).

Guidance Workplace Exposure Limits EH40.

15.2. Chemical safety assessment

No chemical safety assessment has been carried out.

SECTION 16: Other information

Abbreviations and acronyms WEL: Workplace Exposure Limit.

used in the safety data sheet ATE: Acute Toxicity Estimate.
CAS: Chemical Abstracts Service.
DMEL: Derived Minimal Effect Level.
DNEL: Derived No Effect Level.
PNEC: Predicted No Effect Concentration.
PBT: Persistent, Bioaccumulative and Toxic substance.
vPvB: Very Persistent and Very Bioaccumulative.

Revision date 27/09/2019

Revision 6

Supersedes date 05/07/2016

SDS number 300J7

This information relates only to the specific material designated and may not be valid for such material used in combination
with any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurate
and reliable as of the date indicated. However, no warranty, guarantee or representation is made to its accuracy, reliability or
completeness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use.

6/6