Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 8 views

    S210B

    Uploaded by

    diegooliveira

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    S210B

    Uploaded by

    diegooliveira
    8 views1 page

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    8 views1 page

    S210B

    Uploaded by

    diegooliveira

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    TECHNOLOGY DEPARTMENT

    PRODUCT DATA SHEET

    TRADEMARK: DIALAC®
    GRADE: S210B

    TEST METHOD CONDITION UNIT S210B

    Charpy Impact 23 deg.C 10


    Strength,(Notched)
    ISO 179 kJ/m2
    -30 deg.C 2
    Tensile Strength 23 deg.C MPa 47
    ISO 527
    Tensile Modulus 23 deg.C MPa 2350
    Flexural Strength 23 deg.C MPa 73
    ISO 178
    2mm/min
    Flexural Modulus MPa 2500
    Rockwell Hardness ISO 2039 23 deg.C R-scale 108
    1.80MPa
    T.D.U.L. ISO 75
    Flatwise
    deg.C 83

    Density ISO 1183 23 deg.C g/cm3 1.07


    Melt Volume Flow
    Rate
    ISO 1133 220deg.C cm3/10min 25

    Mold Shrinkage note) ISO 294-4 23 deg.C % 0.4-0.6


    Coefficient of Linear cm/cm/deg.
    ISO 11359-2 - 8.5
    Thermal Expansion C(x10-5)
    - mm -
    UL Flame Rating
    File No. E47016
    UL 94 - mm -
    - mm -
    2011-01

    note)Mold shrinkage valus are determined along the parrarel of flow direction and will depend on the molding conditions,such as holding pressure etc, so
    please ask our technical service in advance for applying to the mold design.
    Numeric values shown in the tables are the Typical values of natural colors obtained based on predetermined testing methods and thus are not
    guaranteed values. Also, the numeric values for colored products may slightly vary depending upon the kind and quantity of pigment used.
    Also, these values are subject to change as a result of improvement in the physical properties.
    Be sure to read in advance Material Safety Data Sheet (MSDS) to safely handle our products. You can obtain and use the MSDS from our SALES
    DEPARTMENT
    Information described on these sheets was obtained based on specific conditions and thus UMG ABS, Ltd. will not guarantee that you can always obtain
    the same results as described here from the use of our product.
    Also, UMG ABS, Ltd. is unable to guarantee the quality and safety of your products manufactured by using our products or any information proposed by
    our company.Your company by itself has to judge the suitability of the materials to your products.
    Also pay full attention to legal restrictions and industrial properties.

    You might also like