Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 4 views

    Válvula de Bola. Especificación

    Uploaded by

    Alex Mendoza

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Válvula de Bola. Especificación

    Uploaded by

    Alex Mendoza
    4 views2 pages

    Original Title

    Válvula de bola. Especificación

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    4 views2 pages

    Válvula de Bola. Especificación

    Uploaded by

    Alex Mendoza

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Tri-Tech Ball Valves

    Medical Inc. w/Extensions & Dual Gauge Ports


    Submittal Data Sheet

    Project
    Information Project Number_______________________ Approval_____________________________

    Features

    • Meets NFPA 99 standard


    • 3 piece in-line easy to service
    • Dual gauge/purge ports
    • Full port ¼ turn ball valve
    • Cleaned for Oxygen service
    • Adjustable packing with blow-out proof stem
    • Working pressure rating of 600 psi WOG Adhesive backed caution labels shall be acquired
    (29 in/Hg vacuum) separately and field installed. The labels shall
    • Complies with Federal Standard WW-V35B, state: CAUTION – (gas name) VALVE, DO NOT
    Type II, Composition: BZ, Style 1, CLOSE EXCEPT IN EMERGENCY and/or any
    requirements other required labeling per NFPA 99.
    • Available in sizes ½” – 4” Labels shall be color coded for the appropriate gas
    • Brass 1/8 NPT Female gauge/purge ports service and include a section for stating the area
    • Type K copper extensions being serviced by the valve.
    • Optional locking handles available
    • 100% tested Each valve assembly shall be supplied cleaned for
    oxygen service in accordance with the current
    Compressed Gas Association (CGA) Pamphlet
    Specifications G-4.1, ends capped and sealed in a polyethylene
    bag to prevent contamination prior to installation.
    All valves shall be Tri-Tech Medical 51 series and
    must be installed and tested in strict accordance NFPA – National Fire Protection Association
    with NFPA 99 standards and or any local codes Pamphlet 99 “Health Care Facilities”
    before use.
    CGA – Compressed Gas Association Pamphlet
    The valves shall be bronze, ball-type, with Teflon G-4.1 “Cleaning Equipment for Oxygen Service”
    (TFE) seats and seals. Valves shall be rated at
    working pressure of 600 psi (29 in/Hg vacuum)
    and shall be operated by a lever-type handle
    requiring only a quarter turn from fully open
    position to a fully closed position. Optional
    locking handles are available.

    All valves shall be equipped with type K copper


    tubing extensions with two brass 1/8 NPT female
    gauge/purge ports (one on each side of the valve),
    to facilitate installation. Gauge/purge ports shall
    be shipped with a 1/8 NPT plug. Valves shall be 3
    piece in-line repairable type. Valves shall
    incorporate an adjustable packing and blow-out
    proof stem. Only full port valves having flow
    rates comparable to equivalent size of pipe shall be
    used.
    Tri-Tech Medical Inc., 35401 Avon Commerce Pkwy, Avon, Ohio 44011
    Tel. 1-800-253-8692 -or- 440-937-6244 Fax. 440-937-5060
    Web site www.tri-techmedical.com E mail address: sales@tri-techmedical.com
    Tri-Tech
    Medical Inc.
    BALL VALVES w/ EXTENSIONS & TWO GAUGE PORTS
    Dimensions
    Note: Gauge port supplied w/ 1/8” NPT Plug

    Gauge Port Design

    Six Bolt used


    Ordering Information on 2 ½” , 3” & 4” Valves

    Ball Valve Assemblies – without labels (order gas labels separately)


    Size Standard w/ Locking Dimensions
    Valve Handle Handle
    Part# Part# A B C D E F G H J K L M
    ½” 51-02 51-02LH 6.56 11.82 2.62 1.69 3.35 21.00 2.38 6.37 7.87 1.31 0.93 -
    ¾” 51-03 51-03LH 6.78 11.28 2.93 1.89 4.33 21.00 2.69 6.06 8.25 1.43 1.43 -
    1’ 51-04 51-04LH 6.86 10.70 3.44 2.05 4.33 21.00 2.88 5.87 8.58 1.62 1.62 -
    1 ¼” 51-05 51-05LH 6.77 10.27 3.96 2.56 5.12 21.00 3.25 5.50 8.75 2.00 2.00 -
    1 ½” 51-06 51-06LH 6.65 9.92 4.43 2.72 5.12 21.00 3.38 5.37 8.87 2.25 2.25 -
    2” 51-07 51-07LH 8.09 7.35 5.55 3.15 6.30 21.00 3.75 5.00 10.87 2.81 2.81 -
    2 ½” 51-08 51-08LH 12.64 12.64 6.73 4.29 9.06 32.00 4.25 4.25 16.00 2.50 4.33 5.00
    3” 51-09 51-09LH 12.22 12.22 7.56 4.61 9.06 32.00 4.50 4.50 16.00 2.75 4.73 5.00
    4” 51-10 51-10LH 11.10 11.10 9.80 7.00 12.00 32.00 8.00 8.00 16.00 3.75 6.50 7.50

    Gauges & Labels

    Pressure Gauge Gas ID Labels Cards – sold in Pkgs of (10)


    Pressure gauges 1-1/2” diameter 1/8” NPT center back mount Gas Color Part #
    Scale Part Number N2O USA-ISO ZV104-7R
    0-100 psi 14-1008 CO2 USA-ISO ZV108-7R
    0-300 psi 14-1009 N2 USA-ISO ZV112-7R
    0-30 in Hg 14-1010 AIR USA ZV116-7R
    AIR ISO ZV116-8R
    VAC USA ZV122-7R
    VAC ISO ZV122-8R
    O2 USA ZV124-7R
    O2 ISO ZV124-8R
    WAGD (EVAC) USA-ISO ZV132-7R

    35401 Avon Commerce Parkway, Avon, Ohio 44011


    Phone (440) 937-6244
    © 2005 Tri-Tech Medical Inc. Printed in USA No. 99-0271 Rev B 10/22/07

    You might also like