USER MANUAL

Notices Before using this product, please read this

User Manual carefully and keep it well

Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and
swimming pools.

device damage.
Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission and heat
sources.
Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or
similar objects.
The range of the supply voltage of the monitor is printed on the label on the rear casing. If it is impossible to
determine the supply voltage, please consult the distributor or local power company.

days and damage due to abnormal supply voltage.

Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please contact the
after-sales service directly.
Do not pull or twist the power cable forcedly.

be damaged and the warranty will be invalid.

1
Product introduction

Packing list
Please check that the package of the monitor contains all parts. If any part is lost, please contact the distributor.
The color and shape of parts may vary with models. Figures in this User Manual are for reference only.
Wires supplied may vary with purchased products. Figures in this User Manual are for reference only.

Monitor Stand stem Base

Mount screw Upper mount adapter Lower mount adapter

USER MANUAL

Power cable DP signal cable User Manual

2
 Installation

Installation of base

Carton

2. Take out the stand stem and base, and use the thumb screw of the base to lock the stand tightly.

Stand

Base

3. Put the assembled stand and base components into the slot of the rear casing, slightly press the stand to clip the
rotary shaft component into position, hold the middle of the stand with hand to lightly lift the monitor twice to

Note: During standing of the whole monitor, do not press the liquid crystal screen with hand to avoid
damage to the screen.

3
Installation of mount

Upper foam cover

Lower foam cover

3. Take out the mount adapter from accessories, insert 4 screws into corresponding screw holes at the middle of
the rear casing to lock the upper mount adapter and the lower mount adapter respectively, and tighten the screws
with a screwdriver (not supplied).

Mount adapter

Mount screw

Note: During disassembly of screws, do not take the screen out from the foam to avoid damage to the screen.

4. After assembly of the mount cover, directly hang the monitor onto the mount (not supplied).

Tips: The mounting hole distance of the mount for the product is 75x75mm.

Mount (not supplied)

Monitor

Do not place or hang any object on the mount, and the using height of the mount should be less than 2 meters.

4
Adjusting the monitor

Rotation angle
-20.0°(±2.0°)- +20°(±2.0°)

-5° +20°

100mm

Tilting angle Height range

-5.0°(±2.0°)- +20°(±2.0°) 100mm (±5.0mm)

5
 Usage

Description of buttons

1 2 3 4 5

1 Menu button: Press to enter sub-menus/ quickly enter the main menu
2 Down button: Press to move down in the menu/quickly enter the game crosshair mode
3 Up button: Press to move up in the menu/quickly enter the contextual mode
4 Exit/hot key: Press to return to the previous menu/quickly switch the color format
5

Explanation of indicators

Indicator

Indicator: Steady blue light indicates the power is on and the monitor runs normally. Flashing blue light indicate no
video source and no horizontal or vertical signal detected or low voltage. Please make sure your computer is turned
on and all video cables are fully plugged in and/or connected.

6
Cable connection:

with products.
* Note: If the power cable or signal cable is damaged, you must replace it
with special soft cables or special components purchased from the
manufacture or maintenance department.

HDMI interface
Use the HDMI-DVI cable to connect the HDMI IN interface
Use the HDMI cable to connect the HDMI IN interface
of the product to the DVI OUT interface of a PC.
of the product to the HDMI OUT interface of a PC.
(In general, PCs do not transfer video signals to the
monitor through the DVI OUT interface , and it is
necessary to connect a loudspeaker box additionally to
play sounds of PCs.)

DP interface AUDIO OUT Power interface

Use the DP cable to connect Connect audio outputting Please connect the power
the DP IN interface of the devices such as earphones to cable to the power interface
product to the DP OUT the AUDIO OUT interface. of the monitor, and plug the
interface of a PC. other end of the power cable
into the power socket.

OR

7
 OSD menu

Menu description

The screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the screen after the
monitor is powered on and the button is pressed.
1. Press one of the buttons ( M , , , E, ) to activate the browser screen.

Game Crosshair
Contextual Model Color format
Power switch

2. Press ( ) to enter the OSD screen.

DP1 Resolution: 3440x1440@144Hz

Input Source DP1

Brightness/Contrast DP2
Color Setting
Picture Quality Setting
Display
Audio
Multi-window
OSD
Other

Window 1: Window 2:
Input Source: DP1 Input Source:
Resolution: 3440x1440@144Hz Resolution:

3.Press or to scroll through the functions.

- Select the desired function, and press to enter the sub-menu.

4. Press to exit from the menu screen

8
The function of the display may vary by model.

DP1 None
DP2 None
Input Source
HDMI1 None
HDMI2 None
Brightness 0-100
Blacklevel 0-100
Brightness/
Contrast Contrast 0-100
DCR Off/On
Gamma 1.8/2.0/2.2/2.4/2.6
Pictrue Mode Standard/Photo/Movie/Game/FPS/RTS
Color Temperature Warm/Cool/USER
Color Setting
Low Blue Light 0-100
Hue 0-100
Saturation 0-100
Sharpness 0-100
Response Time Off/High/Middle/Low
Picture Quality
Noise Reduction Off/High/Middle/Low
Setting
Super Resolution Off/High/Middle/Low
Dynamic Luminous Off/On
Control

MPRT Off/On
Aspect Ratio Wide Screen/4:3/1:1/Auto
Display
LedMode Normal/Off/Flicker
Mute Off/On
Audio Volume 0-100
Audio Source DP1/DP2/HDMI1/HDMI2
Multi-Window Off/PIP Mode/PBP 2Win
Sub Win2 Input DP1/DP2/HDMI1/HDMI2
Multi-Window PIP Size Small/Medium/Large
PIP Position TopRight/TopLeft/BottomRight/BottomLeft
Swap N/A

Language English/ / /РУССКИЙ/Español/ /Francais

OSD H-Position 0-100

OSD V-Position 0-100
OSD
OSD Transparency 0-100
OSD Time Out 0-100
OSD Rotation Normal/90/180/270
DP Version DP1.1/DP1.2/DP1.4
Adaptive-Sync Off/On
Other HRD Off/On/Auto Detect

Reset N/A

9
 Basic parameters

Product Name Liquid Crystal Display

Product model SG34-WQ144
Screen Size 34 inches (86.36cm)
Aspect Ratio 21:9
Viewing Angle ≥178°(H) / ≥178°(V)

Pixel pitch 0.23175 (H) × 0.23175 (V) mm

Contrast ratio 4000:1 (TYP)
Colors 16.7M
Resolution 3440 x 1440
Maximum refresh rate 144Hz
Power Input AC 100-240V~, 50/60Hz, 2.0A
Product Without base 808.65 x 363.33 x 129.59 mm, approx. 6.485 kg
Dimensions
Lifting base With base 808.65 x 513.47 x 245.56 mm, approx. 7.85 kg
Tilting angle Forward tilting : 5° ± 2°; Backward tilting: 20° ± 2°
Height range 100 ±5mm
Rotation angle -20° / +20°
Temperature: 0°C~ 40°C (32°F ~ 104°F)
Action
Humidity: 10%~90% RH (non-condensing)
Environmental
conditions Temperature: -20°~ 60° (-4°F ~ 140°F)
Storage
Humidity: 5%~95% RH (non-condensing)

trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

10