OmniAC Series - OmniAC30

All Weather Outdoor Multi-tech Smart Standalone Terminal

• Multi-Biometric technology combining palm and face recognition
• IP66 water & dustproof protection rating
• Supports 125 kHz and 13.56 MHz frequency credentials
• Supports multiple mount types (Single gang/ European/ Asian box)

Industry-Leading Design and User Experience

The OmniAC30 provides an improved user experience
Modern Aesthetic Design with a 5“ high resolution touchscreen and intuitive UI
The build of the OmniAC30 blends a high-quality design. Using our advanced algorithms, users can get
metal enclosure with a tempered glass panel. The the best verification experience.
elegant design fits perfectly into any usage scenario Palm recognition distance: 7" - 15.7" (18cm - 40cm)
and its sleek design brings a practical and reliable Face recognition distance: 15.7"- 47.2" (40cm - 120cm)
experience to users.
Variable Input Voltage
The device is compatible with 9V-24V input voltages.
IP66 Water & Dustproof Protection Rating
Certified IP66 water & dustproof levels represent that
the readers can withstand dust, dirt, sand, and are Outdoor Rated for Variable Environments
resistant to violent surf impact or strong winds and IP66 Weatherproof rating - built to withstand freezing
rain. cold winters, heavy rains and dry/hot summers.
-20°C to 60°C/ -4°F - 140°F (-20°C to 60°Coperating
Advanced Security temperature enables operation even under the most
Secure communication: OSDP(V2.1.7) over RS-485 severe weather conditions.
communication between the OmniAC30 and access
control panels. Using AES-128 encryption standards Unrivaled Palm and Face Recognition Performance
ensures the highest levels of data protection &
security. ARMATURA’s Multi-Biometric technology combines
palm and face recognition with our unique deep
learning algorithm to give users an efficient
Supports Multi-Card Types authentication experience.
Supports 125 kHz and 13.56 MHz frequency Industry-leading combination of visible and NIR
credentials. Supports various card types including infrared recognition technology provides exceptional
EM, IC Card, HID Prox, HID iCLASS, DESFire and authentication accuracy and the industry's top-notch
FeliCa. anti-spoofing protection.

Touchless Solution for New standards

Multi-Factor Authentication Capability of the Post-pandemic World
Offering credential options of palm, face, physical
The OmniAC30 meets the needs of the contactless
cards and QR codes.
world with features like remote user enrollment, palm,
*IC Card, Desfire, HID Prox, iClass, SEOS, etc.
mask detection and face recognition for users with or
*Integrate advanced multiple biometric recognition
without masks. Our Palm/ Face/ Card/ QR code
methods such as palm and face.
recognition technology supports contactless
*QR code scanning for visitors & employees.
authentication.
*PIN code option.

Better Images, Faster Recognition

Video Intercom Coming Soon This device supports palm/ face tracking, which can
The OmniAC30 supports video intercom function more intelligently capture the user's biometrics and
suitable for most visitor scenarios. Two-way audio avoid the user's biometric from continuing to be
streaming with echo and noise cancellation lets you compared after verifying. At the same time, the palm/
easily communicate with visitors. face Automatic Exposure function enables the device
to obtain higher quality images which improves the
recognition accuracy.
Installation Made Easy
Robust design & form factor makes this device easy to Sleep-and-Wake Mode
install. PoE option allows for minimal use of cabling The function enables activation of face recognition
and lowers the cost of installation. OmniAC30 supports camera upon detection of face, in case always-on
multiple mount types (Single gang/ European/ Asian face recognition is not needed, which reduces the
box) to meet most scenarios worldwide. Mounting heat generated by the always-on face recognition of
accessories for speed gates are also available. the camera for better protection and performance of
the device.
 Dimensions

3.82"/ 97mm

8.23"/ 209mm
General Information
Primary Power 9 to 24 VDC (3A min @12V)

POE Supported (IEEE 802.3 at compliant)

RS-485 connection Port 1: RS-485 standard/ OSDP V2.1.7

CPU 1.2GHZ Quad Core ARM Processor

NPU 2.4 TOPs NPU

Memory 4G RAM + 16G Flash

Face Automatic Exposure

Palm Automatic Exposure
Face Tracking
Palm Tracking
Camera WDR
HDR
50Hz to 60Hz Automatic Adaption
Dual Camera
CMOS 2MP Output image 720P*1280P

Primary Host Ethernet: 10/ 100 Mbps, auto MDI/ MDIX

Communication Complies with TLS 1.2 for end-to-end secure communication channel

Ethernet network connection Port 1:10/ 100 Mbps, auto MDI/ MDIX

Complies with TLS 1.2 for end-to-end secure communication channel

(Secured Communication between Standalone Terminal & Server)
Data Protection
AES128 (Secured Communication between the Standalone Terminal &
OSDP Readers & Access Control Panels)

1*TCP/ IP
1*RS-485
Number of Ports Input: 4ch TTL Inputs
Output: 1ch TTL Output
2 relays

Inputs Wiegand in, Button, Sensor in, Aux Input

Outputs Wiegand Output, 2 relays with dry contacts Lock Alarm

Normally Open Contact Rating 5A @30Vdc resistive

Normally Closed Contact Rating 5A @30Vdc resistive

Tamper Switch Magnetic tamper detection system

On-Board Monitor Size: 5.0", Resolution: 720*1280

Audio Indicator Internal speaker with adjustable intensity (Configurable on UI)

MIC Supported

Video Phone Coming Soon

User Capacity 100,000

RFID Card Capacity 100,000

Maximum RFID Card Number Length Wiegand In & Out (up to 64 bits)

Face Capacity 50,000 (1:N)/ 100,000 (1:1)

Palm Capacity 10,000 (1:N)/ 100,000 (1:1)

RFID Reading Distance 13.56MHz & 125kHz: Up to 1.96"/ 50 mm (depending on environment and transponder)

Dual Camera Liveness Detection On: 15.7" - 55.1" (40cm - 140cm)

Face Recognition Distance
Single Camera Liveness Detection On: 15.7" - 78.7" (40cm - 200cm)

Face Recognition Posture Adaptability Yaw ≤ 30°, Pitch ≤ 30°, Roll ≤45°

Face Recognition Accuracy True Accept Rate (TAR)=99%, False Accept Rate(FAR)=0.01%

Face Recognition Mode 1:1, 1:N

Face Recognition Speed < 100ms (Field Test Result)

Face Recognition Liveness Detection Yes (Infrared-visible light mode, Infrared Light Mode)

Face Mask Detection Yes

Palm Recognition Distance Liveness Detection On: 7” -15.7” (18cm - 40cm)

Palm Recognition Posture Adaptability Yaw ≤ 45°, Pitch ≤ 30°, Roll ≤ 90°, Bend ≤ 30°

Palm Recognition Accuracy True Accept Rate(TAR)=98.7%, False Accept Rate(FAR)=0.01%

Palm Recognition Mode 1:1, 1:N

Palm Recognition Speed < 140ms (Field Test Result)

Palm Recognition Liveness Detection Yes (Infrared Light Mode)

55" (140cm) (Using the plate with tilt angle)

Recommend Installation Height
59" (150cm) (Plate with horizontal angle)

Transaction Buffer Records: 1,000,000

Access group 99

On-Board Access Point Control 1 access point on board

On-Board Reader Support 1 (OSDP over RS-485) or 1 (Wiegand Input)

Protection / Resistance Weather & Dust Proof Protection Rating compliant with IP66
 RFID / Biometrics Reader Interface
Input Voltage 9 to 24 VDC (3A min @12V) (Equal to primary power input)

Maximum Input Current 9 to 24 VDC (3A min @12V) (Equal to primary power input)

RS-485 Protocol OSDP 2.1.7 Secure Channel, AES-128

9600-115200 bps, OSDP V2.1.7, asynchronous, half-duplex, 1 start bit, 8 data bits,
OSDP Mode
and1 stop bit.

Wiegand Wiegand In & Out (Up to 64 bits)

TCP/IP, RS-485, OSDP and Wiegand standards supported.

Data Inputs Maximum RS-485/ OSDP cable length: 500ft (152m)
Maximum Wiegand cable length: 328ft (100m)

Cable Requirement
Power & Relays Twisted pair, 18 to 16 AWG

Ethernet CAT-5, minimum 330 ft. (100m)

9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and 1 stop bit.
RS-485 Reader Port One twisted pair with drain wire and shield, 120 ohm resistance, 22-18 AWG,
Maximum cable length: 3937ft (1200m)

Wiegand Port 20 AWG shielded, 328ft. (100m)

Mechanical
Dimensions 3.82" W x 1.112" D x 8.23" H (97 x 28.5 x 209mm)

Weight 29.45oz (835g)

Supports mounting plate installation (Single gang/ European/ Asian box)

Mounting
Supports rots-02 bracket

Housing Material Aluminum alloy + Tempered glass

 Environmental
Operating & Storage Temperature -4°F ~ 140°F (-20°C ~ 60°C)

Operating Humidity 0 - 90%RH (Non-condensing)

Certification(s) CE, FCC, RoHS

Software Interface
TCP/IP Mode Ethernet: 10 - 100Base-TX

TCP/IP Protocol VLAN, SSH, HTTP, IPv4, DNS

TCP/IP Encryption Complied up to TLS1.2 end to end secure communication channel

TCP/IP Communication Push Protocol over HTTP HTTPS

Supported Software Armatura One Security System

 ARMATURA RFID Card Module Supporting List ArmaSec-13112023

Card Module Abbreviation [DF] [SFMH] [NO] [NP] [NI] [NPL] [NIH] [RNP] [RNI]

EP10C/ EP20C/ EP20CK/

EP10C/ EP20C/ EP20CK/ OmniAC20/ OmniAC30/ OmniAC20/ OmniAC30/
EP20CQ/ EP20CKQ/ EP10C/EP20CQ/
Frequency Classification Compatible Readers EP20CQ/ EP20CKQ/
EP20ENC/ EP30 Series/
EP10C/ EP20ENC EP10C/ EP20ENC
EP20CKQ/ EP20ENC
EP10C EP10C EP20CQ*/ EP20CKQ*/ EP20CQ*/ EP20CKQ*/
EP20ENC/ EP30 Series VG10CKQ* VG10CKQ*
VG10CKQ*

LEGIC Advant √ √1 √1 √1 √1
MIFARE Classic, Mini √4 √ √ √ √ √ √4) √4)
S50,S70
MIFARE Classic EV1 √4 √2 √2 √2 √2 √2 √4) √4)
MIFARE DESFire Light √8 √8 √8 √8 √8 √4) √4)
MIFARE DESFire EV1 √4 √ √ √ √ √ √4) √4)
MIFARE DESFire EV2/ EV3 √4 √13 √13 √13 √13 √13 √4) √4)
MIFARE Plus S, X √ √ √ √ √ √4) √4)
MIFARE Smart MX √3 √3 √3 √3 √3 √4) √4)
MIFARE Ultralight √ √ √ √ √ √4) √4)
ISO14443A MIFARE Ultralight C √ √ √ √ √ √4) √4)
MIFARE Ultralight EV1 √2 √2 √2 √2 √2 √4) √4)
NFC (NTAG2xx) √ √ √ √ √
SLE44R35 √3 √3 √3 √3 √3

SLE66Rxx (my-d move) √3 √3 √3 √3 √3

Topaz √ √ √ √
HID iCLASS SEOS √20 √20 √20)
NFC(HCE & NTAG2xx) √ √ √ √ √
13.56MHz

Calypso √3 √3 √3 √3 √3
Calypso Innovatron protocol √3 √3 √3 √3 √3
CEPAS √3 √3 √3 √3 √3
ISO14443B CTS √ √ √ √10
Pico Pass √1 √4 √4 √4 √4
SRI4K, SRIX4K √ √ √ √ √
SRI512, SRT512 √ √ √ √

ISO18092/
Sony FeliCa √5 √5 √5 √5 √5 √1 √1
ECMA-340
EM4x33 √3 √3 √3 √3 √3
EM4x35 √3 √3 √3 √3 √3
HID iCLASS √1) √1 √1 √10) √10 √1 √10

HID iCLASS SE/ SR/ Elite √1) √1 √1 √10) √10 √1 √10

iCODE SLI √ √ √ √ √
LEGIC Advant √1 √1 √1 √1 √1
M24LR16/64 √ √ √ √ √
ISO15693 MB89R118/119 √ √ √ √

SRF55Vxx (my-d vicinity) √3 √3 √3 √3 √3

Tag-it √ √ √ √ √
Pico Pass √1) √4 √4 √4 √4
LEGIC Prime √
CPU Card

*To be released
 ARMATURA RFID Card Module Supporting List ArmaSec-13112023

Card Module Abbreviation [DF] [SFMH] [NO] [NP] [NI] [NPL] [NIH] [RNP] [RNI]

EP10C/ EP20C/ EP20CK/

EP10C/ EP20C/ EP20CK/ OmniAC20/ OmniAC30/ OmniAC20/ OmniAC30/
EP20CQ/ EP20CKQ/ EP10C/EP20CQ/
Frequency Classification Compatible Readers EP20CQ/ EP20CKQ/
EP20ENC/ EP30 Series/
EP10C/ EP20ENC EP10C/ EP20ENC
EP20CKQ/ EP20ENC
EP10C EP10C EP20CQ*/ EP20CKQ*/ EP20CQ*/ EP20CKQ*/
EP20ENC/ EP30 Series VG10CKQ* VG10CKQ*
VG10CKQ*

AWID √ √ √ √
Cardax √ √ √ √
CASI-RUSCO √6 √6 √6 √6 √ √
Deister √6 √6 √6 √6
EM4100, 4102, 4200 √ √7 √7 √7 √7 √ √
EM4050, 4150, 4450, 4550 √ √ √ √
EM4305 √ √ √ √
Ultra Prox √ √ √ √
G-Prox √6) √6) √6)
HID DuoProx II (1336) √ √ √ √1) √1)
HID ISO Prox II (1386) √ √ √ √1) √1)
HID Micro Prox II (1391) √ √ √ √1) √1)
HID Prox III (1346) √ √ √ √1) √1)
HID Prox √ √ √ √1) √1)
125kHz

HID Prox II (1326) √ √ √ √1) √1)

HITAG 1, 2, S √9) √9) √9) √9)
ICT √8) √8) √8) √8)
IDTECK √ √ √ √
Indala √ √ √
ioProx √ √
ISONAS √ √ √ √
Keri √ √ √ √
Miro √ √ √ √
Nedap √6 √6 √6 √6
Nexwatch √ √ √
Pyramid √ √ √ √
Q5 √ √ √ √
T5557, T5567, T5577 √ √ √ √
TITAN (EM4050) √ √ √ √
UNIQUE √ √ √ √
ZODIAC √ √ √ √
Globally Available Y Y Y Y Y
Globally Available
Except for U.S., E.U., Japan,
Availability Australia, Canada, U.K., Albania,
Iceland, Liechtenstein, Monaco,
Y Y Y Y
North Macedonia, Norway,
San Marino, Serbia, Switzerland,
Turkey, and the United Kingdom

√) UID only, customization upon request for reading encryption content 6) Hash value only 13) EV2/ EV3 supported as part of the EV1 downward compatibility
1) UID only 7) Only emulation of 4100, 4102 14) From FW V4.05
2) Read/ write (customisation) enhanced security features on request 8) On request 15) 134.2 kHz only
3) Read/ write (customisation) in direct chip command mode 9) Without encryption 20) PAC (CSN & Facility Code), read/ write (customisation) on request
4) UID only, read/ write (customisation) on request 10) UID + PAC (CSN & Facility Code), read/ write(customisation) on request
5) UID + read/ write (customisation) public area 11) In preparation

The final interpretation of this data sheet belongs to Armatura LLC.

All information regarding the card formats supported by the RFID card modules are claimed by the provider(s) of the card modules. Armatura LLC accepts no liability.
Address:190 Bluegrass Valley Parkway, Alpharetta, GA 30005
Phone: + 1 (470) 816-1970
Email: sales@armatura.us
Website: www.armatura.us
Copyright © 2023 Armatura LLC @ ARMATURA, the ARMATURA logo, are trademarks of Armatura

ArmaSec-15112023