Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

ACCESS 2USB Brochure

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Stereo BRIC

IP Audio Codec

ACCESS 2USB
The Comrex ACCESS Stereo BRIC IP Audio codec has set the standard for reliable
remote broadcast. The new ACCESS 2USB redefines that standard. Now with two USB
ports and support for select 4G Wireless cellular data service modems, ACCESS 2USB
provides even more flexibility to meet the demands of on-the-go broadcasters. AC-
CESS codecs now ship with AAC Coding Algorithms, BRUTE (BRIC UDP Transmission
Enhancement) technology, and network bonding capabilities to provide users with a
complete complement of tools to help get your remote broadcast on the air.

BRIC Technology Any of these networks can be connected


Developed to overcome the inherent simultaneously for increased bandwidth
instability of challenging data networks and network stability.
like the public Internet, BRIC Technology
provides a sophisticated suite of tools BRUTE
that allow for high-quality, low-latency, Not all IP networks are created equally.
stable transmission of audio over a wide In fact, some can be quite challenging
variety of data networks. Intelligent, such as certain Wi-Fi and 3G cellular
Dynamic Jitter Buffer Management, BRIC connections. Comrex has developed
algorithms and the Switchboard Traversal BRUTE (BRIC UDP Transmission
Server all work together to provide the Enhancement) to help maintain stable
most stable Audio over IP transmission and reliable transmission on marginal
platform available for remote broadcast. networks. UDP Reliability and Congestion
Avoidance modes provide an extra
IP Networks measure of error protection with a
IP networks are available virtually minimal increase in latency.
everywhere. ACCESS 2USB offers several CrossLock
ways to get connected. You can utilize the With the addition of firmware version 4.0,
included USB Wi-Fi modem to connect ACCESS is now equipped with CrossLock.
to widely available HotSpots or use the CrossLock creates a virtual private network
integrated Ethernet port to connect (VPN) between ACCESS units. This
to wired DSL or broadband cable IP VPN increases reliability and enables
networks. Either of the two USB ports will simultaneous use of multiple networks.
accommodate connections to 3G/4G With CrossLock, ACCESS can bond
cellular data networks using Comrex networks for more bandwidth, making it
supported USB devices. ACCESS 2USB easier to conduct high fidelity broadcasts
also includes a USB POTS/PSTN modem from even more places.
for use on legacy analog phone lines.
Stereo BRIC
IP Audio Codec

AAC (Advance Audio Coding)


ACCESS 2USB includes AAC modes as standard. For broadcasts that require the highest
audio quality available, AAC delivers. AAC, AAC-LD (low delay), HE-AAC (high efficiency),
HE-AACv2 and AAC-ELD (enhanced low delay) can accommodate nearly any bandwidth,
latency or audio quality requirement. In particular, the AAC-ELD mode provides the
perfect balance of low bit rate, low delay, and high quality audio to get the best out of
remote broadcasts.
(For users who prefer our HQ1/HQ2 encoders or other encoders that are no longer supported,
ACCESS 2USB can be “downgraded” to an older firmware version. Instructions can be found
on our website: http://www.comrex.com/support/access-2usb-and-rackmount/#firmware

Portable
ACCESS 2USB is the most portable and versatile professional IP audio codec
on the market. With its 7-hour Lithium Ion battery, integrated mixer, easy-to-
navigate touch screen and handheld form factor, ACCESS can go just about
anywhere...and has! Wherever there is breaking news, a major sporting event
or large outdoor festival, you’re likely to see an ACCESS Portable. The ACCESS
Portable is the “go-to” remote broadcast tool for broadcasters worldwide.
Optional Mixer
ACCESS 2USB provides a single MIC/Line input on XLR plus stereo
line level inputs and outputs and a headphone output. It’s perfect
for reporters running after a story or simple remotes. For situations
that require more mics and headphones, the optional ACCESS Mixer
easily docks onto the side of the ACCESS 2USB to provide a total of
six switchable MIC/Line XLR inputs and six headphone outputs.

Rack
While the ACCESS 2USB has been optimized to provide complete mobility and solid
reliability, the ACCESS Rack has been designed as its perfect studio counterpart. The 1U
19” rack mount ACCESS features balanced stereo XLR inputs and outputs, AES I/O on
XLR, Ethernet port, POTS modem, multiple USB ports, serial and contact closure ports.
ACCESS Rack can be directly controlled with a keyboard/video/mouse, a USB Touch
screen monitor or driven with a standard web browser with Adobe Flash Player installed.
Connect and Control
ACCESS codecs offer several ways to be configured, controlled and managed. Comrex
Device Manager is a free Windows app that allows for easy IP configuration of ACCESS
codecs as well as firmware and license updates. Comrex Switchboard Traversal Server,
managed by Comrex, provides a simple way for ACCESS codecs to “see” each other from
behind Firewalls and private LANs.
ACCESS 2USB Connections & Features
• MIC/Line switchable mono input on balanced XLR with adjustable volume control
• MIC input offers switchable 12v phantom power
• Stereo headphone output on 1/8” (3mm) mini jack with adjustable volume control
• Stereo analog line level inputs/outputs on unbalanced 1/8” (3mm) mini jacks
• “Hands free” cellular connection on 1/8” (3mm) mini jack
• Audio level meters available via integrated LCD interface
• Two USB ports for Wi-Fi & POTS modems (included) and optional 3G/4G devices
• RJ45 Ethernet connector
• DIN connector for serial ancillary data
• DIN connector for Contact closures (4)
• Multi-pin connector for optional mixer

www.comrex.com • e-mail: info@comrex.com • 19 Pine Road, Devens, Massachusetts 01434 USA • Tel: 978-784-1776 • Fax: 978-784-1717

You might also like