LUIS M.

REYES
Blk. 3 Lot 2 Lynville Homes, San Agustin, Alaminos, Laguna
Email : 17reyesluis1985@gmail.com
Contact No : +63 967-405-6826

POSITION DESIRE:

AutoCAD Operator / QC Inspector on Construction / Document Controller

CAREER OBJECTIVE:

Seeking a position in order to utilize my skills and abilities in all assignments that will be given to me
which will provide me a professional growth while being resourceful, innovative and flexible.

WORKING EXPERIENCE:

AUTOCAD OPERATOR (March 23, 2023 – March 2, 2024)

Construction Direction Company
Riyadh, KSA

JOB DESCRIPTION:
As a CAD Operator:
 Makes drawings related to architectural, structural, mechanical and electrical works such as
shop drawings, as-built, drawings needed for RFA and RFI, transmittal and other necessary
drawings needed in construction site.

CAD OPERATOR / PROJECT CONTROLLER (June. 06, 2022 – March 15, 2023)
PHPC Co., Ltd.
Ayala Avenue, Makati City

JOB DESCRIPTION:
As a CAD Operator:
 Makes drawings related to architectural, structural, mechanical and electrical works such as
shop drawings, as-built, drawings needed for RFA and RFI, transmittal and other necessary
drawings needed in construction site.
As a Project Controller:
 Controls all documents and other paper works with regards to project site such as:
o All kinds of permits needed on site
o Materials used on site
o All drawings needed on project and all necessary documents needed.

CAD OPERATOR / QC INSPECTOR / DOCUMENT CONTROLLER (Oct. 04, 2021 – Mar. 3, 2022)
Balfor Construction and Development Corporation
Binan City, Laguna

JOB DESCRIPTION:
As a CAD Operator:
 Makes drawings related to architectural, structural, mechanical and electrical works such as
shop drawings, as-built, drawings needed for RFA and RFI, transmittal and other necessary
drawings needed in construction site.
As a QC Inspector:
 Check’s quality of work and activities during and after execution on site (actual versus FCD).
 Prepares punch list and issued to site engineer.
 Make sure that all punch lists are done before submission of request for inspection to the
client.

As a Document Controller:
 Make sure that all documents (RFA, RFI, Transmittal, and other construction papers and
documents are in safe place, segregated well and easy to find if needed.

CAD OPERATOR / QC INSPECTOR (March 25, 2019 – September 30, 2021)

D.L. Cervantes Construction Corporation
Gen. Malvar Street, Brgy. Tubigan, Binan City, Laguna

JOB DESCRIPTION:
As a CAD Operator:
 Makes drawings related to architectural, structural, mechanical and electrical works such as
shop drawings, as-built, drawings needed for RFA and RFA, transmittal and other necessary
drawings needed in construction site.

As a QC Coordinator (Structural):
 In-charge on all activities during concrete pouring such as:
(makes cylinder samples, slump test, batching of concrete, de-molding and curing).
 Attend as witness in trial mix for new concrete supplier, testing of rebar and concrete sample
specimen together with the client.
 Prepare and submit as well as record of all transmitted RFI, RFA, Pre-concreting Inspection
Request, Concrete Pouring Request, Result of Testing of Samples and Records of Concrete
Pouring.
 Internal inspection and monitoring of rebar and formworks on all site activities.
 Makes necessary actions / works needed and order by site engineers.

Mold Designer / Engineering Staff (May, 2017 – October, 2017)

Shing Hung Plastics Co., Inc
Lot 8 Phase 1 First Philippine Industrial Park
Sta.Anastacia Sto.Tomas,Batangas

JOB DESCRIPTION:
As a Mold Designer:
 Export 3D drawing into 2D drawing using NX program
 Make dimension and other necessary details needed to create a mold.
 Make basic 3D drawings using NX program.
 Make 2D drawings using AutoCAD
 Make reports, tables and other necessary documents needed in mold department.

As a Engineering Staff:
 Responsible in all incoming and outgoing parts needed in making mold.
 Make a trial request for the new mold to be produced as trial sample.
Make a complete trial report including the appearance, dimension etc that only based on
drawing specification made and given by the customer.
 Make SOP and defect map of all approved parts as a working guide of all operators in
production.

AutoCAD Operator (February, 2012 – June, 2016)

Maged Al Rached Al Humaid Est. For Contracting
Rachedia Road, Buraidah Al Qassim, K.S.A.

JOB DESCRIPTION:
 Handle the design and drafting for complete Mechanical, Electrical, Civil and Architectural
Services.
  Preparing shop drawings and as-built drawings for all works such as Mechanical, Electrical,
Civil and Architectural designs.
 Collecting information from the site and implementing it in as-built drawing.
 Preparing as-built drawing, Co-coordinating with site installation.
 Check and review drawing at an early stage and prepare RFI (request for inspection) to
queries and sorted out prior to work commencing on site.
 Check and review subcontract drawings prior to submittal to ensure technical compliance.
 Makes general arrangement drawings of Mechanical and Electrical for all site projects and
buildings.
 Makes detailed drawings for all mechanical works inside and outside the building such as
HVAC and Plumbing (ducting, chillers, water supply, sprinklers, drainage layout etc.).
 Makes detailed drawings in all electrical works inside and outside the building such as cable
tray, cable trunk, floor trunk, lightings, switches power outlets and all kinds of works
regarding electrical.
 Makes detailed drawings for all civil works inside and outside the building such as beams,
columns, footings, slab etc.
 Makes detailed drawings for all architectural works inside and outside the building such as
plan, section, elevations, doors and windows, etc.
 Makes estimation in all materials needed in electrical, mechanical, civil and architectural
works.
 Check and review sketches & drawings & Engineers Data received from Engineers.
Ensuring conformation to concepts.
 Install and update software if necessary.
 Makes report, tables and other paper works using MS Word and Excel if needed.

Note: The duties & Responsibilities were applied and made by the guidance and thoroughly
checked by the assigned engineer.

Engineering Department Process Technician III (August, 2011 – November, 2011)

Advance Electro Devices Philippines Inc.
Lot B2-4 Carmel Ray Industrial Park II Brgy. Tulo, Calamba City, Laguna, Philippines

JOB DESCRIPTION:
 Responsible for all activities involving Engineering Department workloads.
 Maintain good condition of all machines at all time.
 Repair and reprogram all broken machines if necessary
 Makes report for all things that happen during all period of time.
 Maintain good housekeeping in work area.

Engineering Department Process Technician III (August, 2011 – November, 2011)

Advance Electro Devices Philippines Inc.
Lot B2-4 Carmel Ray Industrial Park II Brgy. Tulo, Calamba City, Laguna, Philippines

JOB DESCRIPTION:
 Responsible for all activities involving Engineering Department workloads.
 Maintain good condition of all machines at all time.
 Repair and reprogram all broken machines if necessary
 Makes report for all things that happen during all period of time.
 Maintain good housekeeping in work area.

Research and Development Department Acting Supervisor (August 1, 2010 – May 18, 2011)
Artnature Manufacturing, Phils. Inc.
Lot 2 First St. First Philippines Industrial Park
Brgy Sta. Anastacia, Sto. Tomas, Batangas

JOB DESCRIPTION:
 Responsible for all activities involving R&D workloads.
 Recommend number of personnel that is required in R&D workloads.
 Monitor the performance of line leaders and operators.
  Monitor and checks the movement of sample orders based on established and agreed turn-
around-time target date.
 Submits daily reports to Assistant Manager.
 Coordinates priorities that might be required by R&D Japan.
 Recommends Japanese Manager, Assistant Manager Work schedules, workday reduction,
transfer of operators based on work-in-process (WIP).
 Check and validates product specification and quality submits to Japanese Manager /
Assistant Manager.
 Implement standard R&D procedure in accordance with the set-up product specification and
quality standards.
 Performs other task that may be assigned by his/her immediate superior.

AutoCAD Operator (July 6, 2009 – July 31, 2010)

Artnature Manufacturing, Phils. Inc.
Lot 2 First St. First Philippines Industrial Park
Brgy Sta. Anastacia, Sto. Tomas, Batangas (Status: Regular)

AutoCAD Operator (February 4, 2008 – July 1, 2009)

Artnature Phils. Inc.
Brgy. Nueva, San Pedro Laguna

SEMINARS AND TRAININGS ATTENDED:

 ISO 9001 : 2000 (Quality Management System) (Artnature Philippines Inc., 2008)
 ISO 9001 : 2008 (Quality Policy) (Artnature Philippines Inc., 2009)
 Leadership Workshop (Supervisory Development Program) Ayala Greenfield Golf Club
House Puting Lupa, Calamba City, Laguna, November 13, 2010.
 ISO 9001:2008 (Internal Auditing Course, February 11-12, 2011) Artnature Manufacturing
Phils., Inc.

EDUCATION QUALIFICATION:

 Bachelor of Science in Computer Engineering (2002-2007) from La Fortuna College, Daan

Sarile, Cabanatuan City, Nueva Ecija.
Awarded as Best in Design Project

PERSONAL PROFILE:

Name : Luis M. Reyes

Father’s Name : Eligio M. Reyes
Mother’s Name : Luisa M. Reyes
Nationality : Filipino
Date of Birth : 17 July 1985
Languages Known : Filipino and English

I hereby certify that all information here is true and correct.