Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Specifications SATA 6 Gb/s 12 Gb/s SAS SATA 6 Gb/s 12 Gb/s SAS

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Specifications SATA 6 Gb/s 12 Gb/s SAS SATA 6 Gb/s 12 Gb/s SAS

Capacity 18TB 18TB 16TB 16TB


Standard Model FastFormat ™ (512e/4Kn)1 ST18000NM000J ST18000NM004J ST16000NM000J ST16000NM004J

SED Model FastFormat (512e/4Kn)1,2 ST18000NM001J ST18000NM005J ST16000NM001J ST16000NM005J

SED-FIPS FastFormat (512e/4Kn)1,2 — ST18000NM007J — ST16000NM007J


Features
Helium Sealed-Drive Design Yes Yes Yes Yes
Conventional Magnetic Recording (CMR) Yes Yes Yes Yes
Protection Information (T10 DIF) — Yes — Yes
SuperParity Yes Yes Yes Yes
Low Halogen Yes Yes Yes Yes

PowerChoice™ Idle Power Technology Yes Yes Yes Yes

PowerBalance™ Power/Performance Technology Yes Yes Yes Yes

Hot-Plug Support 3 Yes Yes Yes Yes


Cache, Multi-segmented (MB) 256 256 256 256
Organic Solderability Preservative Yes Yes Yes Yes
RSA 3072 Firmware Verification (SD&D) Yes Yes Yes Yes
Reliability/Data Integrity
Mean Time Between Failures (MTBF, hours) 2,500,000 2,500,000 2,500,000 2,500,000
Reliability Rating @ Full 24×7 Operation (AFR) 0.35% 0.35% 0.35% 0.35%
Non-recoverable Read Errors per Bits Read 1 sector per 10E15 1 sector per 10E15 1 sector per 10E15 1 sector per 10E15
Power-On Hours per Year (24×7) 8,760 8,760 8,760 8,760
512e Sector Size (Bytes per Sector) 512 512, 520, 528 512 512, 520, 528
4Kn Sector Size (Bytes per Sector) 4,096 4,096, 4,160, 4,224 4,096 4,096, 4,160, 4,224
Limited Warranty (years) 5 5 5 5
Performance
Spindle Speed (RPM) 7,200 RPM 7,200 RPM 7,200 RPM 7,200 RPM
Interface Access Speed (Gb/s) 6.0, 3.0 12.0, 6.0, 3.0 6.0, 3.0 12.0, 6.0, 3.0
Max. Sustained Transfer Rate OD (MB/s, MiB/s) 270/258 270/258 261/249 261/249
Random Read/Write 4K QD16 WCD (IOPS) 170/550 170/550 170/550 170/550
Average Latency (ms) 4.16 4.16 4.16 4.16
Interface Ports Single Dual Single Dual
Rotation Vibration @ 20-1500 Hz (rad/sec²) 12.5 12.5 12.5 12.5
POWER CONSUMPTION
Idle A (W) Average 5.3 W 5.8 W 5.3 W 5.8 W
Max Operating, Random Read/Write 4K/16Q (W) 9.4, 6.4 9.9, 7.0 9.4, 6.4 9.9, 7.0
Power Supply Requirements +12 V and +5 V +12 V and +5 V +12 V and +5 V +12 V and +5 V
Environmental
Temperature, Operating (°C) 5°C – 60°C 5°C – 60°C 5°C – 60°C 5°C – 60°C
Vibration, Non-operating: 2 to 500 Hz (Grms) 2.27 2.27 2.27 2.27
Shock, Operating 2 ms (Read/Write) (Gs) 50 50 50 50
Shock, Non-operating 2 ms (GS) 200 200 200 200
Physical

Height (mm/in, max)4 26.1 mm/1.028 in 26.1 mm/1.028 in 26.1 mm/1.028 in 26.1 mm/1.028 in

Width (mm/in, max) 4 101.85 mm/4.01 in 101.85 mm/4.01 in 101.85 mm/4.01 in 101.85 mm/4.01 in

Depth (mm/in, max)4 147 mm/5.787 in 147 mm/5.787 in 147 mm/5.787 in 147 mm/5.787 in
Weight (lb/g) 670 g/1.477 lb 670 g/1.477 lb 670 g/1.477 lb 670 g/1.477 lb
Carton Unit Quantity 20 20 20 20
Cartons per Pallet / Cartons per Layer 40/8 40/8 40/8 40/8
1 FastFormat models ship in 512e format state. When switching from 512e to 4Kn by executing the FastFormat routine, all data on the drive will be deleted. Note that data must be aligned to 4K sectors to see improved
performance in 4Kn fomat.
2 Self-Encrypting Drives (SED) and FIPS 140-2 Validated drives available through franchised authorised distributors. May require TCG-compliant host or controller support.
3 Supports Hotplug operation per Serial ATA Revision 3.3 specification
4 These base deck dimensions conform to the Small Form Factor Standard (SFF-8301) found at www.sffcommittee.org. For connector-related dimensions, see SFF-8323.

You might also like