SBLT-SHORT-TGD

1
1200 [47.24]
Short
Bedplate

305 [12.01]
685 [26.97]
Deflector
280 [11.02] 3 5
Mounting Holes 122 [4.80] 2
2 9°

280 [11.02]
FRONT VIEW
8.5 [0.33]
225 [8.86]

32.2 lb/ft
47.888 kg/m
CROSSBEAM DETAIL
20 [0.79]
550 [21.65]
200 [7.87]
1200 [47.24]

815 [32.09]
760 [29.92]
84 [3.31]

410 [16.14]
6°

280 [11.02]
185 [7.28]

11.5 [0.45]

24.1 lb/ft
145 [5.71]
35.823 kg/m
240 [9.45] PLAN VIEW CHANNEL DETAIL
MACHINE HARDWARE KIT
Hardware (TGD1 Machine to Short Bedplate) Hardware (TGD2 Machine to Short Bedplate)
Standard Type Quantity Standard Type Quantity
1 GB/T5783 Bolt M16*80 2 1 GB/T5783 Bolt M20*100 4
2 GB/T93 Lock Washer 16 2 2 GB/T93 Lock Washer 20 4
3 GB/T853 Wedge Washer 16 2 3 GB/T853 Wedge Washer 20 8
4 GB/T97.1 Flat Washer 16 2 4 GB/T97.1 Flat Washer 20 4
5 GB/T6170 Nut M16 2 5 GB/T6170 Nut M20 4
6 GB/T5783 Bolt M24*120 4
7 GB/T93 Lock Washer 24 4 BILL OF MATERIAL
8 GB/T853 Wedge Washer 24 4
9 GB/T97.1 Flat Washer 24 SR. PART # DESCRIPTION QTY
4
10 GB/T6170 Nut M24 4 1 SEE DETAILS Short Bedplate 1
2 SBLT-CROSSBEAM-3 Crossbeams 1
3 RBISN-A Isolation Pad Kit 3
4 4 SEE DETAILS Machine Hardware Kit 1
5 SBLT-KIT-SRTW Crossbeam kit for short rope to wall 1
TOTAL 7
DRAWING NO: SBLT-SHORT-TGD Sheet 1 of 2
DESCRIPTION: Standard short bedplate system for TGD1/2, GENERAL TOLERANCES:
including bedplate, 2 cross beams, 6 isolation pads and hardware
MATERIALS: Scale: >6-30mm: ±1 [0.039]
ASSEMBLY NTS >30-120mm: ±1.5 [0.059] www.torindrivena.com
>120-400mm: ±2.5[0.098] 4949 E. Raines Road #101
All Dimensions are in mm [Inches] >400-1000mm: ±4 [0.157]
Date Rev. ECO # Des/App >1000-2000mm: ±6 [0.236] Memphis, TN 38118
Phone: 1-877-622-2888
09/11/19 - - LH/JS
UNLESS SHOWN OTHERWISE Fax: 901-290-1680
8/12/21 - 21ECO0002 JZ/SY
SBLT-SHORT-TGD

1 2 3
280 [11.02]
5 [0.20]
100(100)
8
1200 [47.24]
12.5 240 [9.45] 195 [7.68]
4-M6-7H Threaded
305 [12.01]

10 [0.39] Holes (both sides)

266 [10.47]
300 [11.81] 218 [8.58]
6.3
6-Ø22 [0.87]
12.5 46 [1.81] 12.5 44 [1.73] 30 [1.18]
Bottom Only
92 [3.62] 20-Ø22 [0.87] 12.5
50 [1.97] 185 [7.28] 550 [21.65] 40 [1.57]
112 [4.41]
Bottom Only
12.5
FRONT VIEW SIDE VIEW
6 4 5

181 [7.13]
145 [5.71] 20 [0.79]
40 [1.57]
155 [6.10] 445 [17.52] 445 [17.52] 155 [6.10]
185 [7.28]

8-M6-7H
200 [7.87]
40 [1.57]

Bottom Only
815 [32.09]

54 [2.13] 6.3
550 [21.65]
120 [4.72]

354 [13.94]

20 [0.79] 6-M6-7H
120 [4.72]

Bottom Only
6.3
40 [1.57]

43 [1.69]
1112 [43.78]
195 [7.68]
TOP VIEW Note
1. Use E4303 type welding rod, the weld height is greater than
5mm, the weld should be flat and firm, without defects.
2. Minimize welding distortion. Obvious distortion after welding
should be corrected and deburred. The strength of the welded
part should be the same as the parent material.
3. The bedplate should be painted in same color as traction
machine except for the machined surface and screw holes.

BILL OF MATERIAL
SR. PART # DESCRIPTION QTY
1 - GB/T707 C-Channel 28bx815 2
2 - GB/T707 C-Channel 28bx1180 4
3 - Pad 120x84x5 4
Copyright - All information 4 - Pad 120x84x20 4
contained in this drawing 5 - Pad 139x120x20 4
is property of Torin Drive 6 - Pad 300x120x20 4
North America TOTAL 21
DRAWING NO: SBLT-SHORT-TGD Sheet 2 of 2
DESCRIPTION: Standard short bedplate system for TGD1/2, GENERAL TOLERANCES:
including bedplate, 2 cross beams, 6 isolation pads and hardware
MATERIALS: Scale: >6-30mm: ±1 [0.039]
ASSEMBLY NTS >30-120mm: ±1.5 [0.059] www.torindrivena.com
>120-400mm: ±2.5[0.098] 4949 E. Raines Road #101
All Dimensions are in mm [Inches] >400-1000mm: ±4 [0.157]
Date Rev. ECO # Des/App >1000-2000mm: ±6 [0.236] Memphis, TN 38118
Phone: 1-877-622-2888
09/11/19 - - LH/JS
UNLESS SHOWN OTHERWISE Fax: 901-290-1680
8/12/21 - 21ECO0002 JZ/SY