SERVO-TEK ® DC Tachometer Generators

A-Series B-Series
1 to 10 volts/1000 rpm 11 to 24 volts/1000 rpm
SN-763A-2 SB-757B-1 and SU-7346B-1

SA-757A-2 and SA-740A-2

A-Series B-Series
Instrument Type: As is the case with the A-Series generators, the
• 0.120 inch shaft diameter B-Series also comes in instrument and industrial
• Small in size configurations. The output voltage ranges be-
• Ideally suited to instrumentation applications tween 11 and 24 v/1000 rpm, depending on the
unit. Electrical characteristics, ripple, linearity
Industrial Type: and temperature effects, etc., are the same as the
• 0.187 inch shaft diameter A-Series.
• Special front-end bearings for radial loads
• Ideal for pulley and belt drive applications Other shaft sizes and mounting configurations are
available.
A-Series and B-Series Specifications
Inertia Arm Resis- Armature
Weight (Approx) V/1000 RPM tance (ohms Inductance Outline Di- Mounting Shaft Size
Model Number Mounting (Approx) oz-in-sec2 rpm (max) dynamic) (henrys) mensions Dimensions (inches)
SA-740A-7 Face 3.0 oz 1.32 x 10-4 2.6v 12,000 40Ω 0.024h Fig. 10 Fig. 1 .120
SB-740A-7 Flange 3.0 oz 1.32 x 10-4 2.6v 12,000 40Ω 0.024h Fig. 10 Fig. 2 .120
SA-740A-2 Face 3.0 oz 1.32 x 10 -4
7.0v 12,000 350Ω 0.18h Fig. 10 Fig. 1 .120
SB-740A-2 Flange 3.0 oz 1.32 x 10-4 7.0v 12,000 350Ω 0.18h Fig. 10 Fig. 2 .120
SA-757A-2 Face 3.0 oz 1.32 x 10 -4
7.0v 12,000 350Ω 0.18h Fig. 11 Fig. 1 .187
SB-757A-2 Flange 3.0 oz 1.32 x 10-4 7.0v 12,000 350Ω 0.18h Fig. 11 Fig. 2 .187
SA-740B-1 Face 4.0 oz 2.27 x 10 -4
20.8v 8,000 1000Ω 0.56h Fig. 10 Fig. 1 .120
SB-740B-1 Flange 4.0 oz 2.27 x 10-4 20.8v 8,000 1000Ω 0.56h Fig. 10 Fig. 2 .120
SA-757B-1 Face 4.0 oz 2.27 x 10 -4
20.8v 8,000 1000Ω 0.56h Fig. 11 Fig. 1 .187
SB-757B-1 Flange 4.0 oz 2.27 x 10-4 20.8v 8,000 1000Ω 0.56h Fig. 11 Fig. 2 .187
Sold & Serviced By:

Maximum Driving Torque for A and B series isELECTROMATE

0.25 oz-in
Most units listed above are normally in Toll
stockFree Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
 Mounting and Outline Dimensions
Figure 1 SA Face Mount Figure 2 SB Flange Mount Figure 3 SD Modified Synchro

Figure 4 SM Aircraft Mount Figure 5 SU Large Flange Mount Figure 6 SS Synchro Mount

Figure 7 Aircraft Configuration Figure 8 Sealed Configuration Figure 9 Flat Shaft Configuration

Model # “L” Model “L” “F” “P” “N” “S” Model “L” “E” “F” “N” “S”
ST-7336A 1.867 OMIT OMIT OMIT 0.120 ± .001 XX-7114B 2.193 0.562 0.437 0.157 0.187 ± .001
SM-762A 2.520
ST-7336B 2.304 OMIT OMIT OMIT 0.120 ± .001 XX-7114D 3.253 0.562 0.437 0.157 0.187 ± .001
SM-762B 2.957
ST-7337A 1.875 0.375 0.062 0.157 0.187 ± .001 XX-7146A 1.701 0.562 0.437 0.110 0.120 ± .001
ST-7337B 2.312 0.375 0.062 0.157 0.187 ± .001

Figure 10 Instrument/Industrial Configuration Figure 11 Industrial Configuration Figure 12 E-Series Tachometers

Model # “L” “F” “P” “N” “S” Model # “L” “F” “P” “N” Model # “T” “L” “E” “S”
XX-740A 1.701 OMIT OMIT OMIT 0.120 ± .001 XX-757A 2.240 0.375 0.062 0.157 SS-779E 1.687 1.479 0.375 ± .015 0.120 ± .0005
XX-740B 2.138 OMIT OMIT OMIT 0.120 ± .001 XX-757B 2.677 0.375 0.062 0.157 SS-7251E 1.687 1.479 0.562 ± .015 0.187 ± .0002
XX-780B 2.193 0.375 0.062 0.157 0.187 ± .001 XX-796B 2.677 OMIT OMIT OMIT
XX-780D 3.253 0.375 0.062 0.157 0.187 ± .001 XX-7483H 2.677 0.375 0.062 0.157
XX-797A 1.701 0.187 0.187 0.110 0.120 ± .001
XX-7103A 1.756 0.375 0.062 0.157 0.187 ± .001
XX-7107D 3.253 OMIT OMIT OMIT 0.187 ± .001
XX-7123A 1.756 OMIT OMIT OMIT 0.187 ± .001
Sold & Serviced By:
XX-7123B 2.193 OMIT OMIT OMIT 0.187 ± .001
XX-7356F 1.701 OMIT OMIT OMIT 0.120 ± .001 ELECTROMATE
XX-7360F 1.756 0.375 0.062 0.157 0.187 ± .001 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
SERVO-TEK ® DC Tachometer Generators

Technical Data
An Industry Standard for over fifty years. Linearity
Servo-Tek DC tachometer generators provide a Linearity at any speed is better than 0.1% of the
convenient and economical means of converting output at that rpm.
rotational speed into an isolated analog voltage
signal suitable for remote indication and control. Bidirectional Operation
While this catalog contains information on our most All Servo-Tek DC tachometer generators operate
popular models, we also manufacture countless in either rotational direction. That direction can
specials. be determined by output voltage polarity. Output
(in either direction) is held to a tolerance of
Construction 0.25% of the average output.
Most of our DC generators are housed in aluminum
casings protected in accordance with Mil-C-5541 or
Mil-A-8625 or high performance plastics. Alnico
permanent magnets are used. Armature shafts
are stainless-steel, and rotate on fully-shielded
stainless-steel ball bearings. Commutators are
manufactured from an alloy containing at least 90%
silver. Armature laminations are wound with Isomid
insulated wire, over Teflon slot insulation. The
entire armature is then baked, resulting in a NEMA
Class H insulation system.

Stability
Optimum brush and commutator combination
gives 0.1% stability. Highly stable output gives
no evidence of long-term drift.

Breakdown Voltage
Servo-Tek DC tachometer generators are factory
tested with an ac potential of 1250 volts rms
applied for one second between (either) terminal
and shaft. E-Series units are tested with 500
volts.
Ripple
The ripple rms value will not exceed 3% of the DC Temperature Range
value at any speed in excess of 40 rpm on standard Most of our units are designed for continuous
units. On the low ripple units, the ripple rms value operation in ambient temperatures ranging from
will not exceed 1.5% of the DC value. A peak to -55ºC to +100ºC. Voltage output at 25ºC will not
peak ripple of 1.5% is available on some models. deviate by more than 0.01% per degree of change
within the range of -20ºC to +75ºC. All units are
Brush Life temperature compensated, with the exception of
Sold & Serviced By:
Brushes and commutators are matched for long life D-Series and E-Series units.
and stability.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com