STEREO AMPLIFIER

AX-397 SERVICE MANUAL

IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA
Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and
specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).

DPX-1200
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.

AX-397
■ CONTENTS
TO SERVICE PERSONNEL . . . . . . . . . . . . . . . . . . 2–3 ADJUSTMENT / 11
IMPEDANCE SELECTOR . . . . . . . . . . . . . . . . . . . . . . 3 IC DATA / 12
REMOTE CONTROL PANEL . . . . . . . . . . . . . . . . . . . 3 BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 PIN CONNECTION DIAGRAM / 14
REAR PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6 PRINTED CIRCUIT BOARD . . . . . . . . . . . . . . . . 15–20
SPECIFICATIONS / 7–8 SCHEMATIC DIAGRAM . . . . . . . . . . . . . . . . . . . 21–22
INTERNAL VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23–33
DISASSEMBLY PROCEDURES / 9 REMOTE CONTROL RAX15 . . . . . . . . . . . . . . . . . . 34

© 2005 YAMAHA CORPORATION. All rights reseved.

100976 This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.

’05.09
 AX-397

■ TO SERVICE PERSONNEL
AC LEAKAGE
1. Critical Components Information WALL EQUIPMENT TESTER OR
Components having special characteristics are marked Z OUTLET UNDER TEST EQUIVALENT
and must be replaced with parts having specifications equal
to those originally installed.

2. Leakage Current Measurement (For 120V Models Only)

When service has been completed, it is imperative to verify
that all exposed conductive surfaces are properly insulated INSULATING
from supply circuits. TABLE

● Meter impedance should be equivalent to 1500 ohms shunted ● Leakage current must not exceed 0.5mA.
by 0.15µF.
● Be sure to test for leakage with the AC plug in both
polarities.
“CAUTION”
“F151, F152 : FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 6A, 125V FUSE.”
A V
CAUTION
F151, F152 : REPLACE WITH SAME TYPE 6A, 125V FUSE.
ATTENTION
F151, F152 : UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE DE 6A, 125V.

WARNING: CHEMICAL CONTENT NOTICE!

The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or
plastic (where applicable) components may also contain traces of chemicals found by the California Health and
Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm.

DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR

ANY REASON WHATSOEVER!

Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes
AX-397

or expose eyes to solder/flux vapor!

If you come in contact with solder or components located inside the enclosure of this product, wash your hands
before handling food.

About Lead Free Solder /

The P.C.B.s installed in this unit are soldered using the fol-
lowing solder.

Side A SMT REFLOW Process

Solder Dip
Side B
MI FLOW Process

Among some types of lead free solder currently available, it

is recommended to use one of the following types for the
repair work.
• Sn + Ag + Cu (tin + silver + copper)
• Sn + Cu (tin + copper)
• Sn + Zn + Bi (tin + zinc + bismuth)

2
 AX-397

Caution:
1. As the melting point temperature of the lead free solder is
about 30°C to 40°C (50°F to 70°F) higher than that of the
lead solder, be sure to use a soldering iron suitable to
each solder.
2. If lead solder must be used, be sure to remove lead free
solder from each terminal section of the parts to be replaced
and from the area around it completely before soldering, or
make sure that the lead free solder and lead solder melt
together fully.

■ IMPEDANCE SELECTOR ■ REMOTE CONTROL PANEL

IMPEDANCE SELECTOR

DPX-1200
AX-397
WARNING:
Do not change the setting of the IMPEDANCE SELECTOR switch
when the unit power is switched on, as doing so may damage
the unit.

■ FRONT PANEL

3
 AX-397

■ REAR PANELS
▼ C models

▼ R model
AX-397

▼ T model

4
 AX-397

▼ A model

▼ B model

DPX-1200
AX-397
▼ G, E models

5
 AX-397

▼ L model

▼ J model
AX-397

6
 AX-397

■ SPECIFICATIONS
AUDIO SECTION / GENERAL /
Minimum RMS Output Power (Power Amp. Section) / Power Supply /
L/R, 20 Hz to 20 kHz C model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V, 60 Hz
C, R, T, A, B, G, E, L, J models (0.019% THD, 8 ohms) . . . . . . 60 W + 60 W R model . . . . . . . . . . . . . AC 110/120/220/230-240 V, 50/60 Hz
C, R, T, A, B, G, E, J models (0.038% THD, 6 ohms) . . . . . . . . 70 W + 70 W T model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 220 V, 50 Hz
Dynamic Power Per Channel (IHF) / A model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 240 V, 50 Hz
8/6/4/2 ohms . . . . . . . . . . . . . . . . . . . . . . . 100/120/140/150 W B, G, E models . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V, 50 Hz
Maximum Power Per Channel (B, G, E models) L model . . . . . . . . . . . . . . . . . . . . AC 220/230-240 V, 50/60 Hz
1 kHz, 0.7 % THD, 4 ohms . . . . . . . . . . . . . . . . . . . . . . . . . 95 W J model . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 100 V, 50/60 Hz
IEC Power (B, G, E models) Power Consumption / . . . . . . . . . . . . . . . . . . . 170 W
1 kHz, 0.019% THD, 8 ohms . . . . . . . . . . . . . . . . . . . . . . . 75 W Standby Power Consumption /
Power Band Width / C, T, A, B, G, E, J models . . . . . . . . . . . . . . . . . . . . . . . . 1.1 W
L/R, 0.04% THD, 30 W, 8 ohms . . . . . . . . . . . . 10 Hz to 50 kHz R model (AC 110/120 V) . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 W
Damping Factor / R, L models (AC 220/230-240 V) . . . . . . . . . . . . . . . . . . . 2.7 W
20 Hz to 20 kHz, SPEAKER-A, 8 ohms . . . . . . . . . 240 or more Maximum Power Consumption
Maximum Power (EIAJ) / R model (1 kHz, 6 ohms, 10% THD) . . . . . . . . . . . . . . . 400 W
1 kHz, 10 % THD AC Outlet /
R, T, L, J models (8 ohms) . . . . . . . . . . . . . . . . . . . . . . . . 100 W 3 Switched Outlet
R, T, J models (6 ohms) . . . . . . . . . . . . . . . . . . . . . . . . . . 110 W R, J models . . . . . . . . . . . . . . . . . . . . . . . . . . 50 W Max. total
Input Sensitivity/Input Impedance / C, T, G, E, L models . . . . . . . . . . . . . . . . . . 100 W Max. total
PHONO MM . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 mV/47 k-ohms 1 Switched Outlet
CD, etc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 mV/47 k-ohms A, B models . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 W Max.
Maximum Input Signal / Dimensions (W x H x D) /
PHONO MM, 1kHz, 0.003 % THD . . . . . . . . . . . . . . . . . 115 mV . . . . . . . . . . . . . . . . . . . . . . . . . 435 x 151 x 390 mm
CD, etc., 1kHz, 0.5 % THD . . . . . . . . . . . . . . . . . . . . . . . . 2.2 V (17-1/8" x 5-15/16" x 15-3/8")
Output Level/Output Impedance / Weight / . . . . . . . . . . . . . . . . . . . . . . . . . 8.3 kg (18 lbs 5 oz)
REC OUT . . . . . . . . . . . . . . . . . . . . . . . . . . 165 mV/1.6 k-ohms Finish / . . . . . . . . Black color (C, R, A, B, G, E, L models)
Headphone Jack Rated Output/Output Impedance / Titanium color (R, B, G, E, L models)
Gold color (J, T, L models)
CD, etc. 1 kHz, 150 mV, 8 ohms, 0.019% THD . . . . . . . . 250 mV/680 ohms Accessories / . . . . . . . . . . . . . . . . . Remote Control x 1

DPX-1200
Frequency Response / Battery (Manganese Dry) x 2

AX-397
CD, etc. 20 Hz to 20 kHz . . . . . . . . . . . . . . . . . . . . . . 0 ± 0.5 dB * Specifications subject to change without notice.
CD/DVD DIRECT AMP ON, 10 Hz to 100 kHz . . . . . 0 ± 1.0 dB
RIAA Equalization Deviation /
PHONO MM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 ± 0.3 dB
Total Harmonic Distortion (20 Hz to 20 kHz) /
PHONO MM to REC OUT (3 V) . . . . . . . . . . . . . . . . 0.003 % or less C ........ Canadian model G ........ European model
CD, etc. to SP OUT (42.5 W/8 ohms) . . . . . . . 0.009 % or less R ........ General model E ........ South European model
Signal to Noise Ratio (IHF-A Network) / T ........ Chinese model L ........ Singapore model
PHONO MM (Input shorted, 5 mV) . . . . . . . . . . 88 dB or more A ........ Australian model J ........ Japanese model
B ........ British model
CD (CD DIRECT AMP ON, Input shorted, 165mV) . . . . . . 110 dB or more
Residual Noise (IHF-A Network) /
CD DIRECT AMP ON . . . . . . . . . . . . . . . . . . . . . 35 µV or less
CD DIRECT AMP OFF . . . . . . . . . . . . . . . . . . . 100 µV or less
Channel Separation /
CD, etc. (Input 5.1 k-ohms shorted)
1 kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 dB or more
10 kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 dB or more
Tone Control Characteristics /
BASS Boost/Cut (20 Hz) . . . . . . . . . . . . . +10 dB/-10 dB
Turnover Frequency . . . . . . . . . . . . . . . . . 350 Hz
TREBLE Boost/Cut (20 kHz) . . . . . . . . . . . . +10 dB/-10 dB
Turnover Frequency . . . . . . . . . . . . . . . . . 3.5 kHz
Continuous Loudness Control /

Attenuation (1 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . -30 dB

Gain Tracking Error /
0 to -60 dB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 dB or less

7
 AX-397

(7/8")
DIMENSIONS

21.5

390 (15-3/8")
350 (13-3/4")
18.5
(3/4")
130 (5-1/8")

151 (5-15/16")

435 (17-1/8")
21
(13/16")

Unit : mm (inch)

■ INTERNAL VIEW

q w e r t y u i
AX-397

q MAIN (2) P.C.B.

w MAIN (4) P.C.B. (R, L models)
e MAIN (5) P.C.B.
r MAIN (1) P.C.B.
t MAIN (6) P.C.B.
y MAIN (3) P.C.B.
u FUNCTION (4) P.C.B.
i FUNCTION (5) P.C.B.
o FUNCTION (12) P.C.B.
!0 FUNCTION (7) P.C.B.
!1 FUNCTION (6) P.C.B.
!2 FUNCTION (1) P.C.B.
!3 FUNCTION (10) P.C.B.
!4 FUNCTION (8) P.C.B.

o !0 !1 !2
!5 FUNCTION (11) P.C.B.
!6 FUNCTION (2) P.C.B.
!7 FUNCTION (9) P.C.B.
o !3 !4 !5 !2 !6
!8 FUNCTION (3) P.C.B.

!7 !0 !1 !8
8
 AX-397

■ DISASSEMBLY PROCEDURES
• Remove parts in disassembly order as numbered.
• Disconnect the power cable from the AC outlet.

1. Removal of Top Cover

a. Remove 4 screws ( q ), 1 screw ( w ) and 4 screws ( q w e
e ). (Fig. 1)
b. Slide the Top Cover rearward to remove it. (Fig. 1)

2. Removal of Front Panel Unit

a. Remove the INPUT knob.
b. Remove 1 screw ( r ) and then remove the Support
Top. (Fig. 1) r
c. Remove 7 screws ( t ) and then remove the Front
Panel Unit. (Fig. 1) t
3. Removal of Plate Side
Remove 2 push rivets ( y ) and then remove the Plate
Side L/R. (Fig. 1) y
4. Removal of Sub Chassis Unit
a. Remove 1 push rivet ( u ). (Fig. 1)
b. Remove 2 screws ( i ) and then slide the Sub Chassis u
Unit forward. (Fig. 1) i
c. Loosen the harness fixture fixing the cable.
d. Remove connectors CB221, CB226, CB302, CB306,
CB532, CB581 and CB681 and then remove the Sub

DPX-1200
Chassis Unit. (Fig. 1)

AX-397
e
Top Cover
q

e
Sub Chassis Unit
w

CB681

CB581 u
t CB532 CB302

i r CB306 q
Support Top CB221
Plate Side L CB226
y
Knob
t i

Front Panel Unit

Plate Side R

y
Fig. 1

9
 AX-397

5. Removal of Amp Unit

a. Remove 1 screw ( o ) attaching the Impedance o
Selector. (Fig. 2)
b. Remove 2 screws ( !0 ) attaching the Speaker Termnal. !0
(Fig. 2)
c. Remove 2 screws ( !1 ) and then remove the MAIN (4) !1
P.C.B. (Fig. 2) (R, L models only)
d. Remove 2 screws ( !2 ) and 2 screws ( !3 ). (Fig. 2) !2 !3
e. Remove connectors CB3 and CB151. (Fig. 2)
f. Remove the Amp Unit. (Fig. 2)

Impedance Selector
Amp Unit !3
CB3 !3

!2 Speaker Terminal

CB151
MAIN (4) P.C.B.

!1
o
!0
AX-397

Fig. 2

10
 AX-397

■ ADJUSTMENT

● CONFIRMATION OF IDLING CURRENT ●

1. Right after the power is turned on, confirm that the volt-
age across the terminals of R64 (L ch) and R65 (R ch)
are between 0.1mV to 10.0mV.
2. If the measured voltage exceeds 10.0mV, open (cut off)
R51 (L ch), R52 (R ch) and reconfirm the voltage.
3. Confirm that the voltage is between 0.25mV and 30.0mV
after 60 minutes.

R64 (L ch) Cut

R65 (R ch)

0.1mV–10mV R51 (L ch)

R52 (R ch)

DPX-1200
AX-397
R64 R65

R51 R52

11
 AX-397

■ IC DATA
IC301 : M38503G4A-101FP (FUNCTION (1) P.C.B.)
8-bit Microprocessor
VCC 1 42 P30/AN0
VREF 2 41 P31/AN1
AVSS 3 40 P32/AN2
P44/INT3/PWM 4 39 P33/AN3
P43/INT2/SCMP2 5 38 P34/AN4
P42/INT1 6 37 P00/SIN2
P41/INT0 7 36 P01/SOUT2
P40/CNTR1 8 35 P02/SCLK2
P27/CNTR0/SRDY1 9 34 P03/SRDY2
P26/SCLK1 10 33 P04/(AN5)
P25/TXD 11 32 P05/(AN6)
P24/RXD 12 31 P06/(AN7)
P23 13 30 P07/(AN8)
P22 14 29 P10/(LED0)
CNVSS 15 28 P11/(LED1)
P21/XCIN 16 27 P12/(LED2)
P20/XCOUT 17 26 P13/(LED3)
RESET 18 25 P14/(LED4)
XIN 19 24 P15/(LED5)
XOUT 20 23 P16/(LED6)
VSS 21 22 P17/(LED7)

No. Port Name I/O Function

1 VCC MCU Power Supply, +5V
2 VREF MCU AD Reference
3 AVSS MCU AD Ground
4 P44/INT3/PWM PD I Power Down Detect
5 P43/INT2/SCMP2 TPM/PD I Tape Monitor /Pure Direct SW
6 P42/INT1 PS I SYSTEM Power SW
7 P41/INT0 REM I Remote Control (Wake up)
8 P40/CNTR1 PRINH I Release the Protection
AX-397

9 P27/CNTR0//SRDY1 CEI O Chip Enable (INPUT SEL)

10 P26/SCLK1 CK O Clock
11 P25/TXD DATA O Data
12 P24/RXD TMO/DEST O/I Tape Monitor (397)/Destination Distinction (497)
13 P23 VRUP O Motor Volume (UP)
14 P22 VRDN O Motor Volume (DOWN)
15 CNVSS CNVSS MCU Vss: when single chip mode is used, Vcc: when flash writing is used
16 P21/XCIN D43 I AX-497/397 Detect
17 P20/XCOUT CDM O CD Direct Mute
18 /RESET MCU Reset
19 XIN MCU Oscillator In
20 XOUT MCU Oscillator Out
21 VSS MCU Ground
22 P17/(LED7) LEDA O LED (AUX)
23 P16/(LED6) LEDTP O LED (TAPE)
24 P15/(LED5) LEDM O LED (MD)
25 P14/(LED4) LEDC O LED (CD)
26 P13/(LED3) LEDT O LED (TUNER)
27 P12/(LED2) LEDP O LED (PHONO)
28 P11/(LED1) LSBY O LED (POWER)
29 P10/(LED0) LEDCDD O LED (CD DIRECT)
30 P07(AN8) LEDTM/PD O LED (TAPE MONITOR/PURE DIRECT)
31 P06(AN7) ENL I Rotary Encoder (Left)
32 P05(AN6) ENR I Rotary Encoder (Right)
33 P04(AN5) MUTE O Mute
34 P03//SRDY2 CDD I CD Direct SW
35 P02/SCLK2 PRI I Protection (Overload)
36 P01/SOUT2 RYSP O Speaker Relay
37 P00/SIN2 RYPS O Power Relay
38 P34/AN4 PRDC I Protection (DC)
39 P33/AN3 PRPS I Protection (Power Supply)
40 P32/AN2 THMR I Protection (Temperature Detection)
41 P31/AN1 THML I Protection (Temperature Detection)
42 P30/AN0 REC I Rec Out Selector Detect

12
 CD/DVD DIRECT AMP
CD/DVD DIRECT AMP
SW301
IC502 Q451,452 POWER AMP
ON VR421 Q5—30
CD/DVD 10dB IC531,532 ON RY2
IC302 Q1,2
LOUDNESS SP A
OFF 10dB BALANCE
–10dB RY3
TONE CONTROL OFF 31.8dB
VR531–534 SP B
PHONO EQ AMP RY1
IC501 CD-D M
MUTE PHONES
PHONO MOTOR IC421 MAIN
INPUT DRIVER MUTE
SELECTOR
Main VR
■ BLOCK DIAGRAM

IC452
A LB
RYSP
TUNER B

SW581

AUX CDD
Q26
Q27
TAPE TAPE MONITOR
SW302 D15–18
IN + Q25
TAPE
MONITOR 15 Q3
TAPE IC453
+
OUT –15 Q4
IC456
TAPE SW4
MD B RY151
INH + D20
IN IC452

MD
OUT CD-D MAIN +
MUTE MUTE
–B
XL301 D19
4MHz LB
Q303 Q305 +

T151 SW681

Protection
TAPE
CDD
D153–156

Main VR

SERIAL DATA
(Input Select)
12S
+ POWER
19 20 11 13,14 35,38–41 5 34 17 33 36 RYSP
Microprocessor IC301
37 RYPS Q151
6 7 31,32 12
(Power ON/OFF)

STANDBY Remote Control Input Select Tape Monitor RYPS

/ON U631 SW622
SW621
AX-397

13
DPX-1200
AX-397
 AX-397

■ PIN CONNECTION DIAGRAM

● ICs

LM61CIZ NJM2068MD-TE2 NJU7312AM M38503G4A-101FP LB1641 TC4053BP

22
16

21
5 10
15
42 8
8 30
3: GND 4 16
2: Vout 1: +Vs 1 1
1 1 1

● Transistors

2SA933AS (R, S) 2SA970 (GR, BL) 2SA1358 (O, Y)

2SD1915F (S, T) 2SA1015 (Y) 2SC3421 (O, Y)
2SC1704S (Q, R, S) 2SA1145 (O, Y)
2SC1815 (Y)
2SC2705 (O, Y)
2SC2N5551C-AT
2SA2N5401C-AT
B
E
C C
E B EC
B

2SA1095 (O, P, Y)
2SC4488 (S, T) 2SB1274 (Q, R, S) 2SC4468 (O, P, Y)
2SA1037K (Q, R, S) 2SD1913 (R, S) 2SC4466 (O, P, Y)
DTC114EKA
DTC144EKA

E B B
C B C
B E CE E

● Diodes
AX-397

1SS133 1SS355 S4VB20

1SS139 MA8039-L
1SS140 MA8047-L
1SS176 MA8051-M
1SS270A Anode MA8062-M
HZS12B2TD MA8068-L Anode
HZS162TD MA8091-H

Cathode Cathode

14
 A B C D E F G H
AX-397

■ PRINTED CIRCUIT BOARD (Foil side)

1

FUNCTION (1) P.C.B. (Side A) FUNCTION (1) P.C.B. (Side B) Lead Free Solder Used

FUNCTION (8) FUNCTION (4) 1

FUNCTION (3) P.C.B. CB601 W451 2 CH1

(Side B) Lead Free Solder Used

MAIN (3)
CB201 2 CH2
21 1

2
22 42

3
FUNCTION (11) MAIN (5) CB221
FUNCTION (3) P.C.B. CB641
MAIN (6) CB226
(Side A)
FUNCTION (2) P.C.B. 8 5

(Side A)
1 4
1 10

FUNCTION (6) CB531

CD/DVD DIRECT AMP TAPE MONITOR

VOLUME
Point w
Point q (Pin 20 of IC301)
CH 1 : Emitter of Q309
5 CH 2 : Collector of Q304

↑ ↑ ↑
AC POWER ON AC POWER OFF AC POWER ON
(Connect the power cable) (Disconnect the power cable) (Connect the power cable)

15
6
 A B C D E F G H
AX-397

■ PRINTED CIRCUIT BOARD (Foil side)

1

FUNCTION (5) P.C.B. FUNCTION (5) P.C.B.

(Side A) (Side B) Lead Free Solder Used

CD/DVD

8
1
4

5
2

8
5
4
PHONO

FUNCTION (4) P.C.B. FUNCTION (4) P.C.B.

(Side A) (Side B) Lead Free Solder Used

TUNER

IN

15
16
4
TAPE

OUT

30

1
FUNCTION (1)

IN
CB302

MD
8
1

OUT
9
16

AUX

16
6
 A B C D E F G H
AX-397

■ PRINTED CIRCUIT BOARD (Foil side)

1

FUNCTION (6) P.C.B. FUNCTION (6) P.C.B.

(Side A) (Side B) Lead Free Solder Used
MAIN (1)
W2

4 1

FUNCTION (1) CB304 8 5

5 8

2
1 4

BASS TREBLE BALANCE LOUDNESS

3

FUNCTION (8) P.C.B.

(Side A)
FUNCTION (1)
CB305

FUNCTION (7) P.C.B.

(Side A)
MAIN (1) FUNCTION (10)
CB1 CB631

PHONO TUNER CD/DVD TAPE MD AUX

FUNCTION (8) P.C.B.

(Side B) Lead Free Solder Used
B A
5
SPEAKERS
PHONES

17
6
 A B C D E F G H
AX-397

■ PRINTED CIRCUIT BOARD (Foil side)

1

FUNCTION (9) P.C.B. FUNCTION (10) P.C.B. FUNCTION (11) P.C.B.

(Side A) (Side A) (Side A)
TAPE MONITOR CD/DVD DIRECT AMP

STANDBY
FUNCTION (1)
CB303
FUNCTION (8)
STANDBY CB603
/ON

2
INPUT

FUNCTION (9) P.C.B. FUNCTION (10) P.C.B. FUNCTION (12) P.C.B.

(Side B) Lead Free Solder Used (Side B) Lead Free Solder Used (Side A)

POWER
3

MAIN (2)
W151

18
6
 A B C D E F G H
AX-397

■ PRINTED CIRCUIT BOARD (Foil side) Lead Free Solder Used

1

MAIN (3) P.C.B.

(Side A)

MAIN (1) P.C.B. FUNCTION (1)

CB306
(Side A)
2

Q24A Q24C

SPEAKERS
A
B

3
R

FUNCTION (6)
CB532

MAIN (2)
CB151
Q23A Q23C

IMPEDANCE
SELECTOR

FUNCTION (7)
CB581

MAIN (1)
Circuit No. R, T, A, B, G, E, L C, J
C48–55 O X POWER TRANSFORMER
R98, 99 O X
X: NOT USED
O: USED/APPLICABLE

19
6
 A B C D E F G H
AX-397

■ PRINTED CIRCUIT BOARD (Foil side) Lead Free Solder Used

1

MAIN (2) P.C.B. MAIN (4) P.C.B. (Side A)

MAIN (4)
(Side A) R, L models Circuit No. R L
F211 O X
FUNCTION (12) CB681 MAIN (2) CB154 CB213, 214 O X
POWER CABLE J211–213 O O
J214 X O
X: NOT USED
O: USED/APPLICABLE

2
AC OUTLETS

POWER TRANSFORMER

VOLTAGE SELECTOR
SW211
MAIN (1) CB2
3 240V 1 2/5 6
POWER TRANSFORMER (C, T, A, B, G, E, J) 220V 2 3/6 7
or MAIN (4) W211 (R, L) 110V 3 4/7 8
120V 4 5/8 1

MAIN (2)
Circuit No. J C R T A B G, E L
F151 X O X X X X O X
R152, 153 X X O X X X X X
C151, 152 X X O X X X X X
Q152, 153 X X O X X X X X
D152 X X O X X X X X
CB152, 153 X O X X X X O X
J151 O O X O O O O O
J152 O X O O O O X O

4 X: NOT USED
O: USED/APPLICABLE

MAIN (5) P.C.B. MAIN (6) P.C.B.

(Side A) (Side A)

5 FUNCTION (1)
W301

FUNCTION (1)
W301

20
6
 A B C D E F G H I J K

AX-397

■ SCHEMATIC DIAGRAM (FUNCTION) Page 22 B-6 TO MAIN (1) W2

1
IC302, 501, 502, 531, 532:
NJM2068MD-TE
Dual OP-Amp
15.0 14.0 15.5 15.5

0
OUT1 1 8 +VCC
14.0
0 0
–IN1 2 7 OUT2
+ – + –
+IN1 3 6 –IN2
0.1 14.8
–VCC 4 5 +IN2 0 0
14.8
0

0
0

2
14.1 14.1
0 0.1 0.1 CD/DVD DIRECT AMP ON 0

0.1 0 0.1 14.7 0 0

0.1 0.1
-14.7 0 0 -14.5
0.2
0
13.5 0.2

0
-14.5
0 0

CD/DVD DIRECT AMP OFF

0.1
0.1
0.1
-14.2

3
5.0

4.3 5.0

0 0

-13.2
5.0

5.0 -6.9

Page 22 B-3
0 TO MAIN (1) CB1
Page 22 A-4
TO MAIN (3) CB201

4 1.7

0.7

0 6.3 Page 22 A-1

5.0
1 TO MAIN (5) CB221

0 0 0 Page 22 A-2

0.1
0.1
0.2
1.0
1.0
5.0
1.7
5.1
5.0

5.0
5.1
5.0
5.0

5.1
5.1
5.1
0.2
5.1
5.1
5.1
TO MAIN (6) CB226

0
0 0.7
5.0 5.7 12.1

0
CD/DVD DIRECT AMP ON 2 CH2 6.3
5.1
5.7
0.7
0

5.0
6.3

5.0
5.1
5.0

5.0

1.7
1.7

5.0
0.1
0

5.0
2.2
2.4
0

0
0
0
0

0
4.9
2

0
0 CH1

5 5.0
0 12.1
CD/DVD DIRECT AMP OFF 0 12.1
11.4

0
0
6.9
7.3
6.9
0

0
0
0
0
0
0

0
0
0 0

0
0 0
0

0 0
0

9.6
0
0
0

0
0

0
0
0

0
6 9.6 2.1 5.1

2.1 5.1
0 9.6
-9.5
2.1 0.2
0 9.6

9.6 2.1 5.1

0
0 0
2.1 5.1
0
0

Page 22 I-1
15.6

0
TO MAIN (2) W151 2.1 5.1
-9.5 5.0
0

5.0
0.4

15.2

5.0 5.0
0
0
-15.7

7
0.8
0.6
0.6

1.4
0

1.4

15.2
0.8
0.4

IC452: NJU7312AM IC453: TC4053BP

Analog Function Switch Triple 2 Channel Analog Multiplexers/Demultiplexers
VDD
L1 2 29 R1 16

L2 3 28 R2
14 X-COMMON Point w
L3 4 27 R3 IC421: LB1641 Point q (Pin 20 of IC301)
L-COM1 5 26 R-COM1
A 11 OUT C IN 12 OX Motor Driver CH 1 : Emitter of Q309
LEVEL SHIFTER
LEVEL SHIFTER

LOGIC LEVEL CONVERTER

CH 2 : Collector of Q304
VCC 2

VCC 1
OUT 1

OUT 2

L4 6 25 R4 OUT C IN 13 IX
LATCH

LATCH

P1

P2

L5 7 24 R5 B 10 OUT C IN 2 OY CONTROL INPUTS “ON” CHANNEL

3 2 8 10 9 7 * All voltages are measured with a 10MΩ/V DC electronic volt meter.
INHIBIT C B A 0X (Pin 12), 0Y (Pin 2), 0Z (Pin 5)
L6 8 23 R6 OUT C IN IY (Pin 6) (Pin 9) (Pin 10) (Pin 11) 1X (Pin 13), 1Y (Pin 1), 1Z (Pin 3) * Components having special characteristics are marked Z and
8 22 R-COM2
1
L L L L 0X, 0Y, 0Z must be replaced with parts having specifications equal to
L-COM2 9 C 9
OUT C IN 5 OZ L L L H 1X, 0Y, 0Z
PRE DRIVER

L7 10 21 R7 L L H L 0X, 1Y, 0Z those originally installed.

OUT C IN 3 IZ L L H H 1X, 1Y, 0Z
L8 11 20 R8 L H L L 0X, 0Y, 1Z
4 VZ * Schematic diagram is subject to change without notice.
INH 6 4 Z-COMMON L H L H 1X, 0Y, 1Z
L-COM3 12 19 R-COM3
L H H L 0X, 1Y, 1Z
ST 14 17 DATA
15 Y-COMMON L H H H 1X, 1Y, 1Z
CONTROL H * * * NOTE
VDD 30 16 CK Z
↑ ↑ ↑
8 7 * Don’t Care
VEE 1 15 VSS VSS VEE
IN 1 5 INPUT LOGIC 6 IN 2
18 NC
AC POWER ON AC POWER OFF AC POWER ON
NC 13 GND 1
(Connect the power cable) (Disconnect the power cable) (Connect the power cable)

21
 A B C D E F G H I J K L

AX-397

■ SCHEMATIC DIAGRAM (MAIN)

1

Page 21 J-4 Page 21 G-6 TO FUNCTION (12) CB681

1.0 6.3
0
TO FUNCTION (1) W301

12.1 12.1 48.6

48.6
12.5
0.1
13.1 22.9
2 0.1 22.9
13.1 0
0.7
0
1.0 6.3 0
0 AC43.7

40.7 0
AC74.3

AC61.7
26.9 26.7 40.7
Page 21 J-4 50.5
(42.0)
TO FUNCTION (1) CB306
3 0.4 0.5 40.7
0 0
40.7
32.5 0.4 0.5
35.4
15.7
0.6 0.7 0
0 0 -50.5
16.2 (-42.0)
0 0 0
16.2
-30.8
0
0

-15.9

-15.9

-15.3 -21.8
TO FUNCTION (1) CB306
J-4

4
Page 21

50.5

49.9 50.5

50.0 50.5
49.4
49.4 0.1
50.5 50.5
1.2 1.2

5 0.5 0.5 50.2

0
0
1.2

0
-0.5

-1.1

SPEAKERS
0.7 0.7
0.1 0.1

-49.2 -49.1
0
-0.5
0 -49.2 -49.1
-0.5
-1.1 -1.1
-4.1
-50.5
-48.5 -48.5
0 -50.5
0
6 -49.2
-49.1
-49.2

0.4 -49.1 -49.1 0

-49.1
-49.7 -49.7

0.1

Page 21 I-1
TO FUNCTION (6) CB532

-49.7 -49.7
-49.1
-49.1 0
-49.2 -49.1
-49.1 -49.1

7 0
-48.5
-48.5
-50.5
0.1

-4.1 -1.1
0 -1.1
-0.5 -50.5
-49.2 -49.1 -0.5

0
-49.1
-49.2
0.1 0.1

0.7 0.7

-1.1

0.5

0
1.2
0.1

IC221, 226 : LM61CIZ 0

50.2 * All voltages are measured with a 10MΩ/V DC electronic volt meter.
0.6
Temperature Sensor 0.6 * Components having special characteristics are marked Z and
8 1.2
1.2
50.5 must be replaced with parts having specifications equal to
+Vs
49.4
49.4
50.5 those originally installed.
49.9 * Schematic diagram is subject to change without notice.
Vout 49.9

50.5
Z

GND

22
 AX-397

PARTS LIST
■ ELECTRICAL PARTS
■ WARNING
● Components having special characteristics are marked Z and must ● Z
be replaced with parts having specifications equal to those originally
installed. ●

ABBREVIATIONS IN THIS LIST ARE AS FOLLOWS :

C.A.EL.CHP : CHIP ALUMI. ELECTROLYTIC CAP L.EMIT : LIGHT EMITTING MODULE

C.CE : CERAMIC CAP LED.DSPLY : LED DISPLAY
C.CE.ARRAY : CERAMIC CAP ARRAY LED.INFRD : LED, INFRARED
C.CE.CHP : CHIP CERAMIC CAP MODUL.RF : MODULATOR, RF
C.CE.ML : MULTILAYER CERAMIC CAP PHOT.CPL : PHOTO COUPLER
C.CE.M.CHP : CHIP MULTILAYER CERAMIC CAP PHOT.INTR : PHOTO INTERRUPTER
C.CE.SAFTY : RECOGNIZED CERAMIC CAP PHOT.RFLCT : PHOTO REFLECTOR
C.CE.TUBLR : CERAMIC TUBULAR CAP PIN.TEST : PIN, TEST POINT
C.CE.SMI : SEMI CONDUCTIVE CERAMIC CAP PLST.RIVET : PLASTIC RIVET
C.EL : ELECTROLYTIC CAP R.ARRAY : RESISTOR ARRAY
C.MICA : MICA CAP R.CAR : CARBON RESISTOR
C.ML.FLM : MULTILAYER FILM CAP R.CAR.CHP : CHIP RESISTOR
C.MP : METALLIZED PAPER CAP R.CAR.FP : FLAME PROOF CARBON RESISTOR
C.MYLAR : MYLAR FILM CAP R.CEMENT : CEMENT RESISTOR
C.MYLAR.ML : MULTILAYER MYLAR FILM CAP R.FUS : FUSABLE RESISTOR
C.PAPER : PAPER CAPACITOR R.MTL.CHP : CHIP METAL FILM RESISTOR
C.PLS : POLYSTYRENE FILM CAP R.MTL.FLM : METAL FILM RESISTOR
C.POL : POLYESTER FILM CAP R.MTL.OXD : METAL OXIDE FILM RESISTOR
C.POLY : POLYETHYLENE FILM CAP R.MTL.PLAT : METAL PLATE RESISTOR
C.PP : POLYPROPYLENE FILM CAP RSNR.CE : CERAMIC RESONATOR
C.TNTL : TANTALUM CAP RSNR.CRYS : CRYSTAL RESONATOR
C.TNTL.CHP : CHIP TANTALUM CAP R.TW.CEM : TWIN CEMENT FIXED RESISTOR

DPX-1200
C.TRIM : TRIMMER CAP SCR.BND.HD : BIND HEAD B-TITE SCREW

AX-397
CN : CONNECTOR SCR.BW.HD : BW HEAD TAPPING SCREW
CN.BS.PIN : CONNECTOR, BASE PIN SCR.CUP : CUP TITE SCREW
CN.CANNON : CONNECTOR, CANNON SCR.TERM : SCREW TERMINAL
CN.DIN : CONNECTOR, DIN SCR.TR : SCREW, TRANSISTOR
CN.FLAT : CONNECTOR, FLAT CABLE SUPRT.PCB : SUPPORT, P.C.B.
CN.POST : CONNECTOR, BASE POST SURG.PRTCT : SURGE PROTECTOR
COIL.MX.AM : COIL, AM MIX SW.TACT : TACT SWITCH
COIL.AT.FM : COIL, FM ANTENNA SW.LEAF : LEAF SWITCH
COIL.DT.FM : COIL, FM DETECT SW.LEVER : LEVER SWITCH
COIL.MX.FM : COIL, FM MIX SW.MICRO : MICRO SWITCH
COIL.OUTPT : OUTPUT COIL SW.PUSH : PUSH SWITCH
DIOD.ARRAY : DIODE ARRAY SW.RT.ENC : ROTARY ENCODER
DIODE.BRG : DIODE BRIDGE SW.RT.MTR : ROTARY SWITCH WITH MOTOR
DIODE.CHP : CHIP DIODE SW.RT : ROTARY SWITCH
DIODE.SHOT : SCHOTTKY BARRIER DIODE SW.SLIDE : SLIDE SWITCH
DIODE.VAR : VARACTOR DIODE TERM.SP : SPEAKER TERMINAL
DIOD.Z.CHP : CHIP ZENER DIODE TERM.WRAP : WRAPPING TERMINAL
DIODE.ZENR : ZENER DIODE THRMST.CHP : CHIP THERMISTOR
DSCR.CE : CERAMIC DISCRIMINATOR TR.CHP : CHIP TRANSISTOR
FER.BEAD : FERRITE BEADS TR.DGT : DIGITAL TRANSISTOR
FER.CORE : FERRITE CORE TR.DGT.CHP : CHIP DIGITAL TRANSISTOR
FET.CHP : CHIP FET TRANS : TRANSFORMER
FL.DSPLY : FLUORESCENT DISPLAY TRANS.PULS : PULSE TRANSFORMER
FLTR.CE : CERAMIC FILTER TRANS.PWR : POWER TRANSFORMER ASS’y
FLTR.COMB : COMB FILTER MODULE TUNER.AM : TUNER PACK, AM
FLTR.LC.RF : LC FILTER ,EMI TUNER.FM : TUNER PACK, FM
GND.MTL : GROUND PLATE TUNER.PK : FRONT-END TUNER PACK
GND.TERM : GROUND TERMINAL VR : ROTARY POTENTIOMETER
HOLDER.FUS : FUSE HOLDER VR.MTR : POTENTIOMETER WITH MOTOR
IC.PRTCT : IC PROTECTOR VR.SW : POTENTIOMETER WITH ROTARY SW
JUMPER.CN : JUMPER CONNECTOR VR.SLIDE : SLIDE POTENTIOMETER
JUMPER.TST : JUMPER, TEST POINT VR.TRIM : TRIMMER POTENTIOMETER
L.DTCT : LIGHT DETECTING MODULE

23
 AX-397

P.C.B. FUNCTION
AX-397

24 Note) Those parts marked with “#” are not included in the P.C.B. ass'y.
 AX-397

P.C.B. FUNCTION

DPX-1200
AX-397

Note) Those parts marked with “#” are not included in the P.C.B. ass'y. 25
 AX-397

P.C.B. FUNCTION & MAIN

AX-397

Z
Z
Z

26 Note) Those parts marked with “#” are not included in the P.C.B. ass'y.
 AX-397

P.C.B. MAIN

DPX-1200
AX-397
Z

Z
Z

Z
Z
Z
Z
Z

Z
Z

Note) Those parts marked with “#” are not included in the P.C.B. ass'y. 27
 AX-397

P.C.B. MAIN

Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z

Z
Z
Z
AX-397

Z
Z
Z
Z
Z
Z
Z
Z

Z
Z
Z
Z
Z

Z
Z
Z
Z
Z
Z
Z

28 Note) Those parts marked with “#” are not included in the P.C.B. ass'y.
 AX-397

P.C.B. MAIN & CHIP RESISTORS

Z
Z
Z
Z
Z
Z

DPX-1200
AX-397
■ NOTE
● The chip resistor is not supplied as a replacement part. ●
● When a chip resistor is necessary, use the following part. ●

AAX60720: CHIP RESISTOR SAMPLE BOOK

Note) Those parts marked with “#” are not included in the P.C.B. ass'y. 29
 A B C D E

AX-397

1 ■ EXPLODED VIEW
170

157
6 (12) 3-40
6 (10) 6 (7)
171 120
6 (6)
3-13
132
2
3-40 6 (8)
101
3-41 6
3-40
(9) 3-42
200 158
3-12
3-40 6 (1)
170
200-1 3-1-10
3-1-1 6 (2)
3-1-6 3-41 6 (11) 6 (3)
3-1-3
1-5 1-2 3-2-2
3 1-4 1-3 3-16 3-1-5 3-41
1-2 3-40 3-1-10
158 3-2-5 116 158
1-6 3-1-4
158
114
3-1-3
3-11
3-2-10 3-44
110 12
1-4 3-2-1 3-1-2
1-3 3-2-3 10
3-2-10
18 158 158
4 112 1-2
158 1-5 160
(5)or(6) 157 172
5 2-42
1-1 5 (4) 157
168 161 2-40

2-40 5 (2)
2-1-5 2-40
8
6 (4)
168 2-1-1-C 155
5 (1) 6 (5)
2-1-6
5 (3)
2-1-5 2-40
5 2-1-1-A 2-41 106

133 160 2-1-7

130 5 (5)or(6)

2-42
132 2-1-1-C
2-1-7 2-1-5 2-40

161
2-1-1-A
2-1-5
6 2-1-6
108
108 2-40
145 142
158
158 158
142
133

132
158
158

30
 AX-397

■ MECHANICAL PARTS

Z
Z

DPX-1200
AX-397

Note) Those parts marked with “#” are not included in the P.C.B. ass'y. 31
 AX-397

Z
Z
Z
Z
Z
Z

Z
Z
Z
Z
AX-397

Z
Z
Z

32 Note) Those parts marked with “#” are not included in the P.C.B. ass'y.
 AX-397

DPX-1200
AX-397

Note) Those parts marked with “#” are not included in the P.C.B. ass'y. 33
 A B C D E

AX-397

1 REMOTE CONTROL RAX15

■ SCHEMATIC DIAGRAM
K7 K9 K8
+3V

SW1
K25 K26
ID2

ID1
D1
1 KI/O6 KI/O5 20
2 2 19
K15 K16 K19 K17
KI/O7 KI/O4

3 S0 KI/O3 18 K21 K23 K22 K24

U1 µPD67AMC–311
Q1
4 S1/LED KI/O2 17
R2
47Ω 5 REM 16 K29 K27 K28
KI/O1

6 VDD KI/O0 15
K18 K2
14 J1
7 XOUT KI3

4.00MHz 8 XIN 13 K6 K4 K3 K5
KI2
C1 X1
R1
1Ω
9 GND KI1 12
3 47µF
11
10 S2 KI0

KEY NO. LAYOUT YAMAHA RAX15 IR CODE TABLE

4
Code (ID1)
Key
Key Name Format DEVICE
No.
CD TAPE
2 1 (no key) (no code)
2 POWER NEC 7A-1D
3 4 5 6 3 CD/DVD NEC 7A-15
4 PHONO NEC 7A-14
5 TUNER NEC 7A-16
7 8 9 6 STANDBY NEC 7A-1E
7 MD NEC 7A-C9
8 TAPE NEC 7A-18
9 AUX NEC 7A-55
5 15 16
10 (no key) (no code)
11 (no key) (no code)
12 (no key) (no code)
17 18 13 (no key) (no code)
14 (no key) (no code)
15 PRESET (+) NEC 7A-10
19 16 VOLUME (+) NEC 7A-1A
17 PRESET (-) NEC 7A-11
21 22 23 24 18 VOLUME (-) NEC 7A-1B
19 A/B/C/D/E NEC 7A-12
20 (no key) (no code)
25 26 27 28
21 Device NEC REW 7A-0D REW 7A-01
31 22 Device NEC PAUSE 7A-09 A/B 7A-06
29 23 Device NEC FF 7A-0C FF 7A-02
6 24 Device NEC DISPLAY 7A-0A (no code)
25 Device NEC SKIP (-) 7A-0B DIR A 7A-07
26 Device NEC STOP 7A-09 STOP 7A-03
27 Device NEC SKIP (+) 7A-0A DIR B 7A-40
28 Device NEC DISC SKIP 7A-4F REC 7A-04
29 Device NEC PLAY 7A-08 PLAY 7A-00
30 (no sw)
31 CD/TAPE

34
 AX-397

Parts List for Carbon Resistors

Value 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No.
1.0 Ω HJ35 3100 HF85 3100 10 kΩ HF45 7100 HF45 7100
1.8 Ω HJ35 3180 ❊ 11 kΩ HF45 7110 HF45 7110
2.2 Ω HJ35 3220 HF85 3220 12 kΩ HJ35 7120 HF85 7120
3.3 Ω HJ35 3330 HF85 3330 13 kΩ HF45 7130 HF45 7130
4.7 Ω HJ35 3470 HF85 3470 15 kΩ HF45 7150 HF45 7150
5.6 Ω HJ35 3560 HF85 3560 18 kΩ HF45 7180 HF45 7180
10 Ω HF45 4100 HF45 4100 22 kΩ HF45 7220 HF45 7220
15 Ω HJ35 4150 HF85 4150 24 kΩ HF45 7240 HF45 7240
22 Ω HF45 4220 HF45 4220 27 kΩ HJ35 7270 HF85 7270
27 Ω HJ35 4270 HF85 4270 30 kΩ HF45 7300 HF45 7300
33 Ω HF45 4330 HF45 4330 33 kΩ HF45 7330 HF45 7330
39 Ω HJ35 4470 HF85 4390 36 kΩ HF45 7360 HF45 7360
47 Ω HF45 4470 HF45 4470 39 kΩ HF45 7390 HF45 7390
56 Ω HF45 4560 HF45 4560 47 kΩ HF45 7470 HF45 7470
68 Ω HF45 4680 HF45 4680 51 kΩ HF45 7510 HF45 7510
75 Ω HF45 4750 HF45 4750 56 kΩ HF45 7560 HF45 7560
82 Ω HF45 4820 HF45 4820 62 kΩ HF45 7620 HF45 7620
91 Ω HF45 4910 HF45 4910 68 kΩ HF45 7680 HF45 7680
100 Ω HF45 5100 HF45 5100 82 kΩ HF45 7820 HF45 7820
110 Ω HJ35 5110 HF85 5110 91 kΩ HF45 7910 HF45 7910
120 Ω HF45 5120 HF45 5120 100 kΩ HF45 8100 HF45 8100
150 Ω HF45 5150 HF45 5150 110 kΩ HF45 8110 HF45 8110
160 Ω HJ35 5160 ❊ 120 kΩ HF45 8120 HF45 8120
180 Ω HF45 5180 HF45 5180 150 kΩ HF45 8150 HF45 8150
200 Ω HF45 5200 HF45 5200 180 kΩ HF45 8180 HF45 8180
220 Ω HF45 5220 HF45 5220 220 kΩ HJ35 8220 HF85 8220

DPX-1200
270 Ω

AX-397
HF45 5270 HF45 5270 270 kΩ HF45 8270 HF45 8270
330 Ω HF45 5330 HF45 5330 300 kΩ HF45 8300 HF45 8300
390 Ω HF45 5390 HF45 5390 330 kΩ HF45 8330 HF45 8330
430 Ω HF45 5430 HF45 5430 390 kΩ HJ35 8390 HF85 8390
470 Ω HF45 5470 HF45 5470 470 kΩ HF45 8470 HF45 8470
510 Ω HF45 5510 HF45 5510 560 kΩ HJ35 8560 HF85 8560
560 Ω HF45 5560 HF45 5560 680 kΩ HJ35 8680 HF85 8680
680 Ω HF45 5680 HF45 5680 820 kΩ HJ35 8820 HF85 8820
820 Ω HF45 5820 HF45 5820 1.0 MΩ HF45 9100 HF45 9100
910 Ω HF45 5910 HF45 5910 1.2 MΩ HJ35 9120 ❊
1.0 kΩ HF45 6100 HF45 6100 1.5 MΩ HJ35 9150 HF85 9150
1.2 kΩ HF45 6120 HF45 6120 1.8 MΩ HJ35 9180 HF85 9180
1.5 kΩ HF45 6150 HF45 6150 2.2 MΩ HJ35 9220 HF85 9220
1.8 kΩ HF45 6180 HF45 6180 3.3 MΩ HJ35 9330 HF85 9330
2.0 kΩ HJ35 6200 HF85 6200 3.9 MΩ HJ35 9390 ❊
2.2 kΩ HF45 6220 HF45 6220 4.7 MΩ HJ35 9470 HF85 9470
2.4 kΩ HJ35 6240 HF85 6240
2.7 kΩ HF45 6270 HF45 6270
3.0 kΩ HF45 6300 HF45 6300
1/4W Type
3.3 kΩ HF45 6330 HF45 6330
HF45
3.6 kΩ HJ35 6360 HF85 6360 1/4W Type
1/6W Type
3.9 kΩ HF45 6390 HF45 6390 HJ35
HF85
4.7 kΩ HF45 6470 HF45 6470 10mm
5mm
5.1 kΩ HF45 6510 HF45 6510
5.6 kΩ HF45 6560 HF45 6560
6.8 kΩ HF45 6680 HF45 6680
8.2 kΩ HF45 6820 HF45 6820
9.1 kΩ HF45 6910 HF45 6910
1992

35
 AX-397
AX-397