FPFD
FPFD
FPFD
localhost:2222/informationbrowser/index.jsp
9/29/24, 3:01 PM Flexi Power Distribution Submodule (FPFD) description
localhost:2222/informationbrowser/index.jsp
Flexi Power Distribution Submodule (FPFD) LED indications
LED indications visible on the Flexi Power Distribution Submodule (FPFD) 472301A front
panel.
The control panel is located on the front panel of the Flexi Power Distribution Submodule (FPFD).
There are five LEDs for the corresponding output ports, and two push buttons for the ON/OFF
functionality of the the outputs.
All blinking red All outputs disabled after Internal hardware failure
power on indication
localhost:2222/informationbrowser/index.jsp
9/29/24, 3:04 PM Flexi Power Distribution Submodule (FPFD) LED indications
localhost:2222/informationbrowser/index.jsp
9/29/24, 3:04 PM Flexi Power Distribution Sub-Module (FPFD) interfaces
Four external -48 V DC outputs: 13.3 -16.77 mm2 (6-5 AWG) screw terminals
localhost:2222/informationbrowser/index.jsp 1/2
9/29/24, 3:04 PM Flexi Power Distribution Sub-Module (FPFD) interfaces
The size of the DC input cable is determined by the power of the DC current fed.
One internal DC output to the System Module
ON/OFF switches
localhost:2222/informationbrowser/index.jsp 2/2
9/29/24, 3:04 PM Flexi Power Distribution Submodule (FPFD) dimensions and weight
Property Value
localhost:2222/informationbrowser/index.jsp 1/1
9/29/24, 3:03 PM Flexi Power Distribution Submodule (FPFD) operation
Flexi Power Distribution Sub-Module (FPFD) is a highly integrated optional size-optimized power
distribution unit (PDU) for System Module variant FSMF. It is installed in the top left slot of the
System Module.
The FPFD has integrated basic Over Voltage Protection (OVP Type approval level with 2 kV/1 kV),
EMC filtering and reverse polarity protection. It is IP65 rated.
Flexi Power Distribution Sub-Module (FPFD) can be used for stacked and feederless configurations
in the same way as earlier integrated Flexi PDUs. In feederless configurations, FPFD can be used
with optional Over Voltage Protection units (Flexi System External OVP FSES or FSEP).
Flexi Power Distribution Sub-Module (FPFD) provides four external -48 V DC outputs (fixed to 40 A
(v. 204)) for Flexi Modules (RF Module, RRH, or external System Module) or any standard 48 V DC
device at the site, and one internal DC output to System Module itself.
localhost:2222/informationbrowser/index.jsp 1/1