795F - AC Spec Sheet

Cat
795F AC
Off-Highway Trucks
Preliminary
Specications
Engine Engine Model Gross Power SAE J1995 Bore Stroke Displacement
specied standard.
Cat C175-16 2535 kW 175 mm 220 mm 85 L
Final Drives Total Reduction Ratio 3,400 hp 6.9 in 8.7 in 5,187 in3
35:1
AC Drive System Alternator Controls Wheel Motor Cooling System Brushless, remote mounted, dual bearing IGBT Inverter Technology, air cooled, pressurized cabinet with ltration Rear axle mounted Caterpillar AC induction Variable speed, hydraulic cooling system
Power ratings apply at 1,800 rpm when tested under the specied condition for the Ratings based on SAE J1995 standard air conditions of 25 C (77 F) and 99 kPa (29.61 Hg)
dry barometer. Power based on fuel having API gravity of 35 at 16 C (60 F) and an LHV of 42 780 kJ/kg (18,390 Btu/lb) when engine used at 30 C (86 F). No engine derating required up to 2591 m (8,500 ft) altitude. Compliant with U.S. Environmental Protection Agency Tier 2 emissions standards.
Weights Approximate Gross Machine Operating Weight (GMW) Chassis Weight Body Weight Range
570 166 kg
1,257,000 lb Suspension Effective Cylinder Stroke Front Effective Cylinder Stroke Rear Rear Axle Oscillation
194 874 kg 429,624 lb 38 500-59 000 kg 84,900-130,000 lb
293 mm 141 mm 4.8
11.5 in 5.6 in
GMW depends on tire selection. Consult your tire manufacturer for maximum loaded
top speed. Chassis weight with 100% fuel, hoist, body mounting group, rims and tires. Body weight varies depending on how body is equipped.
Operating Specications Nominal Payload Capacity Top Speed Loaded Steer Angle Turning Diameter Front Turning Circle Clearance Diameter
gross machine weight limitations.
313 tonnes 64 km/h 34 degrees 34 m 38.7 m
345 tons 40 mph 112 ft 127 ft
Body Hoists Pump Flow High Idle Relief Valve Setting Raise Body Raise Time High Idle Body Lower Time Float Body Power Down High Idle
in second stage.
935 L/min 24 500 kPa 26 Seconds 20 Seconds 20 Seconds
247 gal/min 3,553 psi
Refer to the Caterpillar Mining Truck 10/10/20 Overload Policy (AEXQ0250-02) for maximum
Twin, two-stage hydraulic cylinders mounted inside main frame; double-acting cylinders Power raise in both stages; power down in second stage. Automatic body-lower modulation reduces impact on frame.
Cat Off-Highway Trucks

Braking System Oil Cooled Brakes Outside Diameter Brake Surface Front Brake Surface Rear Standards
1067 mm 42 in 132 258.4 cm2 20,500.09 in2 198 388 cm2 30,750.2 in2 J-ISO 3450 JAN88, ISO 3450:1996
7
10 9 11 8 12 13
Electric Retarding Radial Grid Design Brushless AC Motor Dynamic Retarding Power 4750 kW Blended Four Corner Retarding
14
6,370 hp
3 2
4 15 16 17
Weight Distributions Approximate Front Axle Empty 48% Rear Axle Empty 52% Front Axle Loaded 33% Rear Axle Loaded 67%
Dimensions
All dimensions are approximate. Shown with 220 m3 (288 yd3) MSD II Body. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Height to Top of ROPS Overall Length Wheelbase Rear Axle to Tail Ground Clearance Dump Clearance Loading Height Empty Overall Height Body Raised Centerline Front Tire Width Engine Guard Clearance Overall Canopy Width Outside Body Width Inside Body Width Front Canopy Height Rear Axle Clearance Centerline Rear Dual Tire Width Overall Tire Width 6327 mm 15 146 mm 6725 mm 4411 mm 750 mm 1786 mm 7040 mm 15 063 mm 6235 mm 1208 mm 9380 mm 8923 mm 8014 mm 7800 mm 1016 mm 5675 mm 8966 mm 20 ft 9 in 49 ft 9 in 22 ft 1 in 14 ft 6 in 2 ft 6 in 5 ft 11 in 23 ft 2 in 49 ft 6 in 20 ft 6 in 4 ft 0 in 30 ft 10 in 29 ft 4 in 18 ft 0 in 25 ft 8 in 3 ft 4 in 18 ft 8 in 29 ft 6 in
Capacity MSD II 100% ll factor Struck 121.5-211 m3 Heaped (SAE 2:1) 181-252 m3
Contact your local Caterpillar dealer for body recommendations.
159-276 yd3 237-330 yd3
Service Rell Capacities Fuel Tank Fuel Tank (optional) Cooling System Crankcase Final Drives, Each Steering Tank Steering System (Includes Tank) Brake/Hoist Hydraulic Tank Brake/Hoist System (Includes Tank)
3596 L 7192 L 1100 L 310 L 341 L 210 L 300 L 508 L 1500 L
950 gal 1,900 gal 291 gal 82 gal 90 gal 55.5 gal 79 gal 134.2 gal 396.3 gal
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com AEHQ6019 (09-2008) 2008 Caterpillar Inc. All rights reserved Printed in the U.S.A. Materials and specications are subject to change without notice. Featured machines in may include additional equipment. See your Caterpillar dealer for available options. CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, Caterpillar Yellow and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

795F - AC Spec Sheet

Uploaded by

Copyright:

Available Formats

795F - AC Spec Sheet

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

795F - AC Spec Sheet

Uploaded by

Copyright:

Available Formats

Cat

Cat C175-16 2535 kW 175 mm 220 mm 85 L

194 874 kg 429,624 lb 38 500-59 000 kg 84,900-130,000 lb

293 mm 141 mm 4.8

313 tonnes 64 km/h 34 degrees 34 m 38.7 m

345 tons 40 mph 112 ft 127 ft

935 L/min 24 500 kPa 26 Seconds 20 Seconds 20 Seconds

247 gal/min 3,553 psi

Cat Off-Highway Trucks

159-276 yd3 237-330 yd3

3596 L 7192 L 1100 L 310 L 341 L 210 L 300 L 508 L 1500 L

You might also like