Dfe 530tx
Dfe 530tx
Dfe 530tx
DFE-530TX
Key Features
10/100Mbps NWay interface Full duplex supported for both 10BASE-T, 100BASE-TX
32-bit PCI bus master operation Remote boot supported
Low Ethernet command processing overhead Easy-to-view diagnostic LEDs
Single shielded RJ-45 connector Simply Plug and Play
UTP and STP supported Complete driver support
Support IEEE 802.1x Port-based Network
Access Control (MD5 only)
DFE-530TX
Technical Specifications 10/100Mbps Adapter
General Remote Boot
Standards Boot ROM Address
- IEEE 802.3u 100BASE-TX Fast Ethernet Searched by system BIOS
- IEEE 802.3 10BASE-T Ethernet
- ANSI/IEEE 802.3 NWay auto-negotiation Boot ROM Size
- PCI local bus 2.2 specifications 64KB
Topology
Star
Remote Boot Server Support
Protocol - RPL boot ROM supports:
CSMA/CD Novell NetWare 3.x, 4.x, 5.x RPL Boot Server
Microsoft Windows NT 4.0 Boot Server
Network Data Transfer Rate
- 100BASE-TX: 100Mbps
- 10BASE-T: 10Mbps
Full Duplex
- Fast Ethernet: 200Mbps
- Ethernet: 20Mbps
Network Cables
- 10BASE-T:
2-pair UTP Cat. 3, 4, 5 (100 m)
EIA/TIA-568 100-ohm shielded twisted-pair
(STP) (100 m)
- 100BASE-TX:
2-pair UTP Cat. 5 (100 m)
EIA/TIA-568 100-ohm shielded twisted-pair
(STP) (100 m)
System
IRQ
Allocated by system
I/O Address
Allocated by system
Cache Buffer
- 2K byte receive/transmit FIFO
CO
M M I SS
IO
F N
U S A
Power Consumption
0.4 watts
Dimensions
120 x 51 mm Ordering Information
Weight 10/100Mbps PCI Card
68 grams (2.4 oz.) DFE-530TX 10/100Mbps PCI card
Optional Boot ROMs
Operating Temperature DFE-534R3 RPL boot ROM
0o - 40oC (32o - 104o F)
Storage Temperature
-25o - 55o C (-13o - 131o F)
Humidity
5 % - 95% non-condensing