MSDS Fevitite-R-101

SAFETY DATA SHEET
Printing Date: 17.6.2013 Revision Date: 17.6.2013
SECTION I. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

Product name FEVITITE R101
Product description Epoxy resin
Product use Epoxy resin to use with hardener for multi use
Manufacturer/supplier Pidilite Industries Ltd., Ramkrishna Mandir Road,
Kondivita, Off: M. Vasanji Road, P.O. Box 17411,
Andheri (East), Mumbai – 400059
Email: pilmsds@pidilite.co.in
Telephone: +91-22-2835 7000 Fax: +91-22-2821 6007
SECTION II- IDENTIFICATION OF HAZARDS
May cause irritation to eyes & skin. May cause long term adverse effects in the aquatic environment. Repeated
exposure may cause skin dryness & cracking.
Signal word Warning
Hazard Labeling:
Hazard statement(s):
H315: Causes skin irritation
H317: May cause an allergic skin reaction
H319: Causes serious eye irritation
H411: Toxic to aquatic life with long lasting effects
Precautionary statement(s):
P273: Avoid release to the environment
P280: Wear protective gloves.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue.
Hazard symbol:
Risk Phrases:
R36/38: Irritating to eyes and skin
R43: May cause sensitization by skin contact.
R51/53: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Safety Phrases:
S2: Keep out of the reach of children
S28: After contact with skin, wash immediately with plenty of warm water & soap.
S37/39: Wear suitable gloves and eye/face protection
S61: Avoid release to the environment. Refer to special instructions/safety data sheet
SECTION III – COMPOSITION/ INFORMATION ON INGREDIENTS
Component Cas No %
Diglycidyl ether resin 25068-38-6 100 %
(Contd. on page 2)
MSDS Code: SDS93701 Page 1 of 4 Rev. No: 0.2

SAFETY DATA SHEET
(Contd. of page 1)
SECTION IV- FIRST AID MEASURES

Skin contact: Flush skin with soap & water while removing contaminated cloths. Seek medical help if
required. Wash contaminated cloths before reuse.
Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Consult Physician if
irritation persists.
Inhalation: Move the subject to fresh air. If not breathing, give artificial respiration. If respiration is
difficult, give Oxygen and seek help from Physician.
Ingestion: Immediately give two glasses of water to drink. Do not induce vomiting. Never give
anything by mouth to an unconscious person. Call a Physician.
Note to physician: There is no specific antidote. Treatment should be given symptomatically on the clinical
conditions.
SECTION V - FIRE-FIGHTING MEASURES
Product does not present fire or explosion hazard
Fire extinguishing media: Use extinguishing media appropriate for surrounding fire.
Special fire fighting procedure: As in any fire, wear self-contained breathing apparatus pressure-
demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Unusual fire and explosion hazards: May generate toxic or irritating combustion products.
SECTION VI - ACCIDENTAL RELEASE MEASURES
Personal precautions: Avoid contact with the skin and the eyes. See sections VII & VIII for personal
protective equipment & handling.
Environment precautions: Do not allow material to contaminate ground water system. Do not flush into
surface water or sanitary sewer system. Collect the spilled material by sweeping
the floor in a paper and dispose off in accordance with the local regulations.
Cleaning methods: Wash floor with water after collecting the material.
SECTION VII- HANDLING AND STORAGE
Precautions for safe handling: If handle with care there is no need of any precautions. Avoid prolonged
or repeated breathing of vapors and contact with skin.
Storage
Requirements to be met by
storerooms and receptacles: Store in a cool, dry, well-ventilated area. Protect from frost & physical
damage.
Information about storage in
one common storage facility: Store away from heat, direct sunlight and moisture. Keep in a closed
labeled container. Keep container close when not in use.
Further information about storage conditions: None. No special technical protective measures required.
SECTION VIII- EXPOSURE CONTROL/ PERSONAL PROTECTIVE EQUIPMENT
Additional information about design of technical facilities: No further data is available; see section VII.
General protective and hygienic measures: The usual precautionary measures are to be adhered to when
handling chemicals.
(Contd. on page 3)

SAFETY DATA SHEET
(Contd. of page 2)
Personal protective equipment
Eye protection: Use Face shield & chemical splash proof safety goggles or equivalent.
Hand protection: Impervious (rubber, neoprene, PVC, etc.) hand gloves, aprons
Skin and body protection Wear appropriate protective gloves and clothing to prevent skin exposure
Respiration protection: Maintain good ventilation in the area. Suggested MSHA/NIOSH approved
respirator where vapors concentrations is more.
Hygiene measures: Handle in accordance with good industrial hygiene and safety practice
Protective measures: Eye wash facility and emergency shower
Engineering measures: Use only in area provided with appropriate exhaust ventilation
SECTION IX - PHYSICAL AND CHEMICAL PROPERTIES
Form: Opaque viscous liquid Odour: Characteristic
0
Melting point/Melting range: Not required Boiling point: > 150 C
Flash point: Not applicable. Flammability: Non flammable
Autoignition temperature: Not determined Decomposition temperature: Not determined
0
Density / specific gravity (water=1): Not determined Vapor pressure (MMHg) @ 20 C: 0.00165
0
Viscosity @ 25 C: 30,000 – 50,000 Centipoise Solubility in / Miscibility with water: Insoluble
SECTION X - STABILITY AND REACTIVITY DATA
Chemical stability: Stable under normal conditions of use.
Thermal decomposition: May yield acrid smoke and irritating gases with oxides of carbon
Possibility of hazardous reaction: No dangerous reactions known
Hazardous Polymerization: Hazardous polymerization does not occur
Conditions to avoid: Extreme heat and freezing
Incompatible Materials: Acids, bases, strong oxidizers & reactive metals.
Hazardous decomposition product: Not known
SECTION XI - TOXICOLOGICAL INFORMATION
Acute toxicity: For resin (DGEBPA), Acute Oral Toxicity (LD50) Rat 11,400 mg/kg, Acute Dermal
Toxicity (LD50) Rabbit >20 ml/kg Inhalation Toxicity (LC50) No deaths in saturated air.
Potential health effects
On the skin: Toxic by skin absorption. Not expected to be irritating. May cause allergic skin reaction with
symptoms of reddening, itching, swelling, and rash.
On the eye: Causes serious eye irritation
Inhalation: May be harmful if inhaled. Causes respiratory tract irritation
Ingestion: May be harmful if swallowed.
CMR Effects: The product has not been tested for CMR effects
Additional toxicological information:
When used and handled according to specifications, the product does not have any harmful effects to our
experience and the information provided to us.
(Contd. on page 4)

SAFETY DATA SHEET
(Contd. of page 3)
SECTION XII - ECOLOGICAL INFORMATION

Aquatic toxicity: Quantitative data on the ecological effect of this product are not available.
Persistence and degradability:
Biodegradability: Result: According to the results of tests of biodegradability this product is not readily
biodegradable.
Behaviour in environmental systems:
Bioaccumulative potential: No further relevant information available.
Mobility in soil: No further relevant information available.
Results of PBT and vPvB assessment: No information is available
Other adverse effects No further relevant information available.
Suggested not to allow to enter soil, waterways and open bodies of water. Toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
SECTION XIII - DISPOSAL INFORMATION
Waste from Residues / Unused Products: Dispose of in accordance with local regulations
Contaminated Packaging Empty containers should be taken to local recyclers for disposal
SECTION XIV - TRANSPORTATION INFORMATION
DOT: Not Regulated IATA: Not regulated IMDG: UN No. 3082
UN proper shipping Name (IMDG): Environmentally Hazardous Substance liquid n.o.s (containing Epoxy resin)
Transport hazard class (es) (IMDG,): 9
Packing group (ADR, IMDG, IATA): III EMS no.: F-A; S-F
Marine Pollutant: Yes
SECTION XV - REGULATORY INFORMATION
Chemical Inventories: TSCA: All ingredients of this product are listed or exempt from listing.
Canadial Inventory Status: All components are included in the Domestic Substance List (DSL)
SECTION XVI - MISCELLANEOUS INFORMATION
DISCLAIMER: The data presented here is based on information we believe to be reliable but unknown risks may
be present. We disclaim liability for damage or injury which results from the use of the above
data and nothing contained therein shall constitute a guarantee or a warranty (including warranty
of Merchantability or fitness for a particular purpose) or representation (including freedom from
Patentability) by us with respect to the accuracy or completeness of the data, the product
described or their use for any specific purpose as known to us. The final determination of the
suitability of information, the manner of use of information or product and potential infringement
of patents is the sole responsibility of the user.
ABBREVIATIONS USED: NA - NOT APPLICABLE, NH - NON HAZARDOUS,

CI - CONTENT INSIGNIFICANT.
ISSUED BY SAFETY DEPARTMENT

MSDS Fevitite-R-101

Uploaded by

Copyright:

Available Formats

MSDS Fevitite-R-101

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MSDS Fevitite-R-101

Uploaded by

Copyright:

Available Formats

SAFETY DATA SHEET

Printing Date: 17.6.2013 Revision Date: 17.6.2013

SECTION I. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

MSDS Code: SDS93701 Page 1 of 4 Rev. No: 0.2

SECTION IV- FIRST AID MEASURES

MSDS Code: SDS93701 Page 2 of 4 Rev. No: 0.2

MSDS Code: SDS93701 Page 3 of 4 Rev. No: 0.2

SECTION XII - ECOLOGICAL INFORMATION

ABBREVIATIONS USED: NA - NOT APPLICABLE, NH - NON HAZARDOUS,

ISSUED BY SAFETY DEPARTMENT

MSDS Code: SDS93701 Page 4 of 4 Rev. No: 0.2

You might also like