SAFETY DATA SHEET

YUBASE 6

Section 1. Identification
Product identifier : YUBASE 6
Product code : Not available.
Chemical name : Distillates (petroleum), hydrotreated heavy paraffinic
Other means of : Baseoil - unspecified; Distillates, petroleum, hydrotreated heavy paraffinic; Mineral
identification oil, petroleum distillates, hydrotreated heavy paraffinic; Distillates (petroleum), hydro-
treated heavy paraffinic; Paraffin oil; HYDROTREATED HEAVY PARAFFINIC
DISTILLATE; DISTILLATES (PETROLEUM) HYDROFVLD
Product type : Liquid.

Recommended use of the chemical and restrictions on use

Identified uses
Manufacture of lubricants.

Supplier's details : SK Lubricants Co., Ltd.

26, Jong-ro, Jongno-gu, Seoul, KoreaTelephone:+82-2-2121-5114

Emergency telephone : +82-52-208-2114 - Hours of operation: 9:00-18:00

number

Section 2. Hazard identification

Classification of the : Not classified.
substance or mixture

GHS label elements

Signal word : Not applicable.
Hazard statements : Not applicable.
Precautionary statements
Prevention : Not applicable.
Response : Not applicable.
Storage : Not applicable.
Disposal : Not applicable.

Other hazards which do not : None known.

result in classification

Section 3. Composition/information on ingredients

Substance/mixture : Substance
Chemical name : Distillates (petroleum), hydrotreated heavy paraffinic
Other means of : Baseoil - unspecified; Distillates, petroleum, hydrotreated heavy paraffinic; Mineral
identification oil, petroleum distillates, hydrotreated heavy paraffinic; Distillates (petroleum), hydro-
treated heavy paraffinic; Paraffin oil; HYDROTREATED HEAVY PARAFFINIC
DISTILLATE; DISTILLATES (PETROLEUM) HYDROFVLD

CAS number/other identifiers

REACH number : 01-2119484627-25-0068 /01-2119484627-25-0042
CAS number EC : 64742-54-7
number : 265-157-1

Date of issue/Date of revision : 1/1/2020 Date of previous issue : No previous validation Version : 1.01 1/9
YUBASE 6

Section 3. Composition/information on ingredients

Ingredient name % CAS number
Distillates (petroleum), hydrotreated heavy paraffinic 100 64742-54-7
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require
reporting in this section.
Occupational exposure limits, if available, are listed in Section 8.

Section 4. First aid measures

Description of necessary first aid measures
Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention if irritation occurs.
Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing.
If not breathing, if breathing is irregular or if respiratory arrest occurs, provide
artificial respiration or oxygen by trained personnel. It may be dangerous to the
person providing aid to give mouth-to-mouth resuscitation. Get medical attention if
adverse health effects persist or are severe. If unconscious, place in recovery
position and get medical attention immediately. Maintain an open airway. Loosen
tight clothing such as a collar, tie, belt or waistband.
Skin contact : Flush contaminated skin with plenty of water. Remove contaminated clothing and
shoes. Wash contaminated clothing thoroughly with water before removing it, or
wear gloves. Continue to rinse for at least 10 minutes. Get medical attention if
adverse health effects persist or are severe. If necessary, call a poison center or
physician. Wash clothing before reuse. Clean shoes thoroughly before reuse.
Ingestion : Wash out mouth with water. Remove dentures if any. Remove victim to fresh air
and keep at rest in a position comfortable for breathing. If material has been
swallowed and the exposed person is conscious, give small quantities of water to
drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not
induce vomiting unless directed to do so by medical personnel. If vomiting occurs,
the head should be kept low so that vomit does not enter the lungs. Get medical
attention if adverse health effects persist or are severe. Never give anything by
mouth to an unconscious person. If unconscious, place in recovery position and get
medical attention immediately. Maintain an open airway. Loosen tight clothing such
as a collar, tie, belt or waistband.

Most important symptoms/effects, acute and delayed

Potential acute health effects
Eye contact : No known significant effects or critical hazards.
Inhalation : No known significant effects or critical hazards.
Skin contact : May be harmful in contact with skin.
Ingestion : No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact : No specific data.
Inhalation : No specific data.
Skin contact : No specific data.
Ingestion : No specific data.

Indication of immediate medical attention and special treatment needed, if necessary

Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Specific treatments : No specific treatment.

Date of issue/Date of revision : 1/1/2020 Date of previous issue : No previous validation Version : 1.01 2/9
YUBASE 6

Section 4. First aid measures

Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. It
may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Wash contaminated clothing thoroughly with water before removing it, or wear
gloves.

See toxicological information (Section 11)

Section 5. Firefighting measures

Extinguishing media
Suitable extinguishing : Use an extinguishing agent suitable for the surrounding fire.
media
Unsuitable extinguishing : None known.
media

Specific hazards arising : In a fire or if heated, a pressure increase will occur and the container may burst.
from the chemical
Hazardous thermal : No specific data.
decomposition products

Special protective actions : Promptly isolate the scene by removing all persons from the vicinity of the incident if
for fire-fighters there is a fire. No action shall be taken involving any personal risk or without
suitable training.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained
equipment for fire-fighters breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode.

Section 6. Accidental release measures

Personal precautions, protective equipment and emergency procedures
For non-emergency : No action shall be taken involving any personal risk or without suitable training.
personnel Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Avoid breathing vapour or
mist. Provide adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Put on appropriate personal protective equipment.
For emergency responders : If specialised clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the
information in "For non-emergency personnel".

Environmental precautions : Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).

Methods and material for containment and cleaning up

Small spill : Stop leak if without risk. Move containers from spill area. Dilute with water and mop
up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry
material and place in an appropriate waste disposal container. Dispose of via a
licensed waste disposal contractor.
Large spill : Stop leak if without risk. Move containers from spill area. Approach the release
from upwind. Prevent entry into sewers, water courses, basements or confined
areas. Wash spillages into an effluent treatment plant or proceed as follows.
Contain and collect spillage with non-combustible, absorbent material e.g. sand,
earth, vermiculite or diatomaceous earth and place in container for disposal
according to local regulations (see Section 13). Dispose of via a licensed waste
disposal contractor. Contaminated absorbent material may pose the same hazard
as the spilt product. Note: see Section 1 for emergency contact information and
Section 13 for waste disposal.

Date of issue/Date of revision : 1/1/2020 Date of previous issue : No previous validation Version : 1.01 3/9
YUBASE 6

Section 7. Handling and storage

Precautions for safe handling
Protective measures : Put on appropriate personal protective equipment (see Section 8). Do not ingest.
Avoid contact with eyes, skin and clothing. Avoid breathing vapour or mist. Keep in
the original container or an approved alternative made from a compatible material,
kept tightly closed when not in use. Empty containers retain product residue and
can be hazardous. Do not reuse container.
Advice on general : Eating, drinking and smoking should be prohibited in areas where this material is
occupational hygiene handled, stored and processed. Workers should wash hands and face before
eating, drinking and smoking. Remove contaminated clothing and protective
equipment before entering eating areas. See also Section 8 for additional
information on hygiene measures.

Conditions for safe storage, : Store in accordance with local regulations. Store in original container protected
including any from direct sunlight in a dry, cool and well-ventilated area, away from incompatible
incompatibilities materials (see Section 10) and food and drink. Keep container tightly closed and
sealed until ready for use. Containers that have been opened must be carefully
resealed and kept upright to prevent leakage. Do not store in unlabelled containers.
Use appropriate containment to avoid environmental contamination. See Section 10
for incompatible materials before handling or use.

Section 8. Exposure controls/personal protection

Control parameters
Occupational exposure limits
Ingredient name Exposure limits
Distillates (petroleum), hydrotreated heavy paraffinic ACGIH TLV (United States, 3/2017).
TWA: 5 mg/m³ 8 hours. Form: Inhalable
fraction

Appropriate engineering : Good general ventilation should be sufficient to control worker exposure to airborne
controls contaminants.
Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure
controls they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process
equipment will be necessary to reduce emissions to acceptable levels.

Individual protection measures

Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and
safety showers are close to the workstation location.
Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn,
unless the assessment indicates a higher degree of protection: safety glasses with
side-shields.
Skin protection
Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should
be worn at all times when handling chemical products if a risk assessment indicates
this is necessary. Considering the parameters specified by the glove manufacturer,
check during use that the gloves are still retaining their protective properties. It
should be noted that the time to breakthrough for any glove material may be
different for different glove manufacturers. In the case of mixtures, consisting of
several substances, the protection time of the gloves cannot be accurately
estimated.

Date of issue/Date of revision : 1/1/2020 Date of previous issue : No previous validation Version : 1.01 4/9
YUBASE 6

Section 8. Exposure controls/personal protection

Body protection : Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product.
Other skin protection : Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
Respiratory protection : Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use.

Section 9. Physical and chemical properties and safety

characteristics
Appearance
Physical state : Liquid.
Colour : Clear. Colourless.
Odour : Mineral oil. [Slight]
Odour threshold : Not available.
pH : Not available.
Melting point/freezing point : Not available.
Boiling point : 300 to 580°C (572 to 1076°F)
Flash point : Closed cup: ≥220°C (≥428°F)
Evaporation rate : Not available.
Flammability : Not available.
Lower and upper explosion : Not available.
limit/flammability limit
Vapour pressure : ≤0.01 kPa (≤0.075006 mm Hg) [room temperature]
Relative vapour density : ≥5 [Air = 1]
Relative density : 0.842 [Water = 1]
Solubility : Not available.
Solubility in water : Not available.
Partition coefficient: n- : 3.9 to 6
octanol/water
Auto-ignition temperature : 260 to 371°C (500 to 699.8°F)
Decomposition temperature : Not available.
Viscosity : Kinematic (40°C (104°F)): 0.36 cm2/s (36 cSt)
Flow time (ISO 2431) : Not available.

Section 10. Stability and reactivity

Reactivity : No specific test data related to reactivity available for this product or its ingredients.

Chemical stability : The product is stable.

Possibility of hazardous : Under normal conditions of storage and use, hazardous reactions will not occur.
reactions

Conditions to avoid : No specific data.

Incompatible materials : No specific data.

Date of issue/Date of revision : 1/1/2020 Date of previous issue : No previous validation Version : 1.01 5/9
YUBASE 6

Section 10. Stability and reactivity

Hazardous decomposition : Under normal conditions of storage and use, hazardous decomposition products
products should not be produced.

Section 11. Toxicological information

Information on toxicological effects
Acute toxicity
Product/ingredient name Result Species Dose Exposure
Distillates (petroleum), LC50 Inhalation Dusts and mists Rat >5.53 mg/l 4 hours
hydrotreated heavy paraffinic
LD50 Dermal Rabbit >5000 mg/kg -
LD50 Oral Rat >5000 mg/kg -
Irritation/Corrosion
Not available.
Sensitisation
Not available.
Mutagenicity
Not available.
Carcinogenicity
Not available.
Conclusion/Summary : The DMSO extract by IP 346 of this substance is less than 3% (typical 0.2% with
maximum 0.5%).
Consequently it is not classified as a carcinogen.
Reproductive toxicity
Not available.
Teratogenicity
Not available.
Specific target organ toxicity (single exposure)
Not available.
Specific target organ toxicity (repeated exposure)
Not available.
Aspiration hazard
Not available.

Information on likely routes : Routes of entry anticipated: Oral, Dermal, Inhalation.

of exposure
Potential acute health effects
Eye contact : No known significant effects or critical hazards.
Inhalation : No known significant effects or critical hazards.
Skin contact : May be harmful in contact with skin.
Ingestion : No known significant effects or critical hazards.

Symptoms related to the physical, chemical and toxicological characteristics

Eye contact : No specific data.
Inhalation : No specific data.
Skin contact : No specific data.
Ingestion : No specific data.

Date of issue/Date of revision : 1/1/2020 Date of previous issue : No previous validation Version : 1.01 6/9
YUBASE 6

Section 11. Toxicological information

Delayed and immediate effects as well as chronic effects from short and long-term exposure
Short term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Long term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Potential chronic health effects
Not available.
General : No known significant effects or critical hazards.
Carcinogenicity : No known significant effects or critical hazards.
Mutagenicity : No known significant effects or critical hazards.
Teratogenicity : No known significant effects or critical hazards.
Developmental effects : No known significant effects or critical hazards.
Fertility effects : No known significant effects or critical hazards.

Numerical measures of toxicity

Acute toxicity estimates
Not available.

Section 12. Ecological information

Toxicity
Product/ingredient name Result Species Exposure
Distillates (petroleum), Acute EC50 >100 mg/l Daphnia 48 hours
hydrotreated heavy paraffinic
Acute IC50 >100 mg/l Algae 72 hours
Acute LC50 >100 mg/l Fish 96 hours

Persistence and degradability

Product/ingredient name Aquatic half-life Photolysis Biodegradability
Distillates (petroleum), - - Inherent
hydrotreated heavy paraffinic

Bioaccumulative potential
Product/ingredient name LogPow BCF Potential
Distillates (petroleum), 3.9 to 6 - high
hydrotreated heavy paraffinic

Mobility in soil
Soil/water partition : Not available.
coefficient (KOC)

Other adverse effects : No known significant effects or critical hazards.

Date of issue/Date of revision : 1/1/2020 Date of previous issue : No previous validation Version : 1.01 7/9
YUBASE 6

Section 13. Disposal considerations

Disposal methods : The generation of waste should be avoided or minimised wherever possible.
Disposal of this product, solutions and any by-products should at all times comply
with the requirements of environmental protection and waste disposal legislation
and any regional local authority requirements. Dispose of surplus and non-
recyclable products via a licensed waste disposal contractor. Waste should not be
disposed of untreated to the sewer unless fully compliant with the requirements of
all authorities with jurisdiction. Waste packaging should be recycled. Incineration or
landfill should only be considered when recycling is not feasible. This material and
its container must be disposed of in a safe way. Care should be taken when
handling emptied containers that have not been cleaned or rinsed out. Empty
containers or liners may retain some product residues. Avoid dispersal of spilt
material and runoff and contact with soil, waterways, drains and sewers.

Section 14. Transport information

UN IMDG IATA
UN number Not regulated. Not regulated. Not regulated.

UN proper - - -
shipping name
Transport hazard - - -
class(es)

Packing group - - -
Environmental No. No. No.
hazards

Special precautions for user : Transport within user’s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in
the event of an accident or spillage.

Transport in bulk according : Not available.

to Annex II of Marpol and
the IBC Code

Section 15. Regulatory information

International regulations
Chemical Weapon Convention List Schedules I, II & III Chemicals
Not listed.
Montreal Protocol (Annexes A, B, C, E)
Not listed.
Stockholm Convention on Persistent Organic Pollutants
Not listed.
Rotterdam Convention on Prior Informed Consent (PIC)
Not listed.
UNECE Aarhus Protocol on POPs and Heavy Metals
Not listed.
German Water Hazard Class (WGK) : 1

Inventory list

Date of issue/Date of revision : 1/1/2020 Date of previous issue : No previous validation Version : 1.01 8/9
YUBASE 6

Section 15. Regulatory information

Australia : Listed
Canada : Listed
China : Listed
Europe : Listed
Japan : Japan inventory (ENCS): Listed
Malaysia : Listed
New Zealand : Listed
Philippines : Listed
Republic of Korea : Listed
Taiwan : Listed
Turkey : Listed
United States : Listed

Section 16. Other information

History
Date of printing : 1/1/2020
Date of issue/Date of : 1/1/2020
revision
Date of previous issue : No previous validation
Version : 1.01
Key to abbreviations : ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships,
1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)
UN = United Nations
Procedure used to derive the classification
Classification Justification
Not classified

References : CONCAWE, ECHA

Indicates information that has changed from previously issued version.
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-
named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or
completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may
present unknown hazards and should be used with caution. Although certain hazards are described herein,
we cannot guarantee that these are the only hazards that exist.

Date of issue/Date of revision : 1/1/2020 Date of previous issue : No previous validation Version : 1.01 9/9