Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Basic-Spec&Points-Coimbatore

Download as pdf or txt
Download as pdf or txt
You are on page 1of 14

Standard Construction Package

S.no Item in scope of work Specification considered for quotation Make and basic price

Structure

Depth up to 5 feet from natural ground level.


Exacavtion depth for Exacavation in hard rock shall be charged additionally
1
foundations If the water table is encountered before 5', then dewatering
charges shall be additional .
Backfilling in foundation to be done with exacavted soil ( where
ever possible ) . If the excavated soil is not fit for backfilling, then
2 Backfilling
the cost of removal of such soil and backfilling with gravel shall
be additional.
Plinth height considered for this quotation is 1.5' (Car Parking)
3 Plinth protection & height 3'(Main Building) from the natural gound level, reinforcment as
per strcutural drawings.
The top surface of the filled earth within plinth walls shall be
treated with anti termite chemical in the ratio of 1:19 of the
surface area before sub-base to floor is laid. If filled earth has
Pidilite/Premise/Equivale
4 Anti termite treatment been well rammed and the surface does not allow the emulsion
nt
to seep through, holes up to 50 to 75mm deep at 300 mm
centers both ways shall be made with crow bars on the surface
to facilitate saturation of the soil with the emulsion.
3 Meters (10 Feet ) floor to floor / slab top to slab top (
5 Floor to Floor height
including slab)
Concrete mix as per structural design (M20 mix is assumed for
this quote) Cement - JSW CHD @
RMC for slabs / beams, foundations (Provided logistically 375/Bag
6 RCC / Concrete
possible & MOQ for Pumping) RMC(M20)@INR 4500
Site mixed concrete for columns and other RCC elements /cum.
Assumption for concrete in cuft per sft of bup area -
JSW Neo Steel
As per structural design . Quantity of steel is assumed to be 3.5 8mm - Rs 75/Kg, 10mm -
7 Reinforcement
kg/ sft of built up area for this quotation Rs.73.5/Kg, 12mm and
above - Rs.72.5/Kg
8 Aggregates 20mm & 40mm
All external walls to be in Wirecut Bricks - Red Bricks
9 Masonary works Rs 12/Nos
All internal walls to be in Wirecut Bricks- Red Bricks
Parapet wall to be in 4,5" brickwork and height 3' . Parapet wall
considered for roof terrace, attached terrace and balconies
Provision / opening for exhaust fan to be provided in kitchen /
toilets
12 mm thk Single coat plaster in internal walls
18 mm thk Single coat plaster on external walls.
1 Nos Continuous drip course shall be provided at the parapet
JSW Power Pro Rs
8 Plaster level in Plaster
355/bag
Drip course around ventilators & windows to be provided
GI / Fiber plaster mesh at the junction of RCC and masonary,
Electrical Conduits
1 No each in bedroom/Kitchen or Utility along the shorter span
9 Lofts & Low roof
for a width of 2' with RCC Cantilevel slab of 2" thick
Lintels shall be provided spanning over the door & window
10 Lintels
openings with 150 mm bearing
Regular dogleg staircase with RCC waist slab & RCC/Brick steps
11 Staircase
will be provided
Basic chajja projections 12" - 18" deep and width equal to the
relevant window should be provided as a part of this package.
12 Sunshades
Any other architectural projections shall be charged additionally
based on elevation design
200 mm deep sunk slabs to be provided in toilet areas as per
13 Sunken Slabs
design if required.
Slab and columns shuttering to be done in MS Plates , Props,
Screwjacks, Acrospans. Bamboo poles may be used as additonal
14 Shuttering support but such poles shall not be used in more than 10% of
slab area. If plywood shuttering is required for slab, then it
should be at additional charge.

All surfaces should be dry and free from contamination such


as oil, grease, loose particles, decayed matter, laitance, and
all traces of mould release oils and curing compounds before
application. It is essential that all surfaces to be treated be pre-
FOSROC/Dr.Fixit/Equivale
15 Waterproofing soaked with clean water prior to application. Application of two
nt
coats of Acrylic polymer modified protective and waterproofing
cementitious coating for concrete surface and masonry walls.
Toilet Sunken portions(excluding ground floor), Terrace &
Balcony.

Flooring & Tiling


Tiles to be fixed with cement mortar (1:4) with joints filled with
16 Fixing of tiles white cement. Fixing with adhesive and epoxy grout shall be
charged additionally.
Living ( including Drawing, Somany/H&R
Flooring with vitrified tiles with paper joints ( no spacers ) with
17 Living, Family Lounge ) & Johnson/Equivalent - Rs.
4'x2' Soluble Salt Vitrified tiles. 4 Inch skirting on walls
Dining areas 60 / sft
Somany/H&R
Flooring with vitrified tiles with paper joints ( no spacers ) with
18 Bedrooms & Kitchen Johnson/Equivalent - Rs.
4'x2' Soluble Salt Vitrified tiles. 4 Inch skirting on walls
60 / sft
Somany/H&R
Flooring with paper joints ( no spacers ) with 1'x1' anti skid
19 Balconies Johnson/Equivalent - Rs.
ceramic / vitrified tiles
40 / sft
Somany/H&R
Vitrified step tiles with embossing / grooves on the treads to be Johnson/Equivalent
20 Staircase
used Stepstone or equivalent.
Rs.50/ sft
Somany/H&R
21 Parking Area 1'x 1' vitrified parking tiles Johnson/Equivalent - Rs.
40 / sft
22 Set back areas Front Setback : - Not included in the scope of work
Side & Rear setback - Not included in the scope of work
Dado / wall tiling Height - 7'
23 Toilet tiling Toilet flooring to be done in ceramic / vitrified tiles with paper Basic Brand - Rs.45/Sft
joints (No spacers). Joint filling in cementitious grout
24 Kitchen Dado Height 2' from the counter top Basic Brand - Rs.45/Sft
Max 12 Rft of counter length is considered
Structure - RCC slab 2' deep and 2" high cantilevered from the
25 Kitchen Platform wall. Granite - Rs. 150 /Sft
The counter top shall in be in Granite stone.
Counter top stone edge to be finished with half round moulding
Plumbing & Sanitary
UG Sump(Brick
work&RCC)/Septic Tank (Brick
26 Not Included in the scope of work.
work&RCC)/Soak Pit/Over
head tank (RCC)
Connection to be provided using 1" PVC pipe. (Direct
Piping from plot entry point of connection to the kitchen or over head tank is not included in
Supreme/Ashirvad/Equiv
27 connection to the this scope and shall be provided at extra cost ). Connection from
alent
undergrapund sump colony supply / municipal tapping point to the plot is not
considered in this scope of work.
Plumbing from UG Sump to Supreme/Ashirvad/Equiv
28 To be done in 1" UPVC pipes
overhead tank alent
Plumbing from Overhead tank Supreme/Ashirvad/Equiv
29 To be done in 1" UPVC pipes
to toilets alent
Two nos 1000 litres PVC Overhead tanks to be provided. One for
Kitchen and other for toilets. MS stand for PVC tanks is
addtional.
Water supply to be done in 3/4" CPVC pipes for following points
:
30 Internal plumbing of toilets 1. Bath mixer ( Hot & Cold )
2. Basin mixer ( Cold connection only )
3. Health Faucet -1 no. with 2in 1 Bib cock
4. Geyser connections
5. Shower point
6. Water supply Connection for flush tank / cistern - 1no.
Drainage pipes to be done in 3" / 4" PVC pipes connecting
following points to the vertical stacks :
1. Floor / Nahni Trap ( 2nos )
2. Point for Floor mounted
3. Connection for wash basin bottle trap
Following Fittings and fixtures to be installed along with
accessories
1. Floor mounted EWC ( STrap ) with seat cover and lid
2. Exposed PVC flushing cistern ( concealed flushing cistern is not
considered for this quotation and can be installed at additional
charges )
CP fittings and sanitary
3. Wash basin without pedestal ( in case of table top / counter
fixtures - Rs. 20000 /- per
sunk washbasins, the cost of counter and storage below counter
toilet for the list of
shall be additional )
fixtures mentioned here
4. 2- in -1 Wall mixer
5. Overhead shower
7. Pillar cock
8. Health faucet
9. Angle cocks & connectors for washbasin, geyser , cistern
water supply points.
10. 2 way bibcock
Vertical stacks to be in UPVC SWR Pipes to be installed on wall
brackets
All soil pipes to be in 6" PVC pipes
All Waste pipes to be in 4" PVC pipes
Supreme/Ashirvad/Equiv
31 External Plumbing All rainwater pipes to be in 4" PVC pipes ( Rainwater harvesting
alent
is not a part of this scope )
Inspection chambers ( min 450 x 450 mm ) to be provided at
every point where new pipes are connected to drainage line or
the line turns or realigns.
Only 1 kitchen is considered for the purpose of this quotation.
32 Kitchen Plumbing
More than one kitchen is charged additional.
Connection for Sink faucet ( Cold water connection only )
Connection for Geyser is not in scope of this quote
Connection for supply to RO / Water purifier
Sink Faucet - Rs. 2000/-
Waste water disposal connection for kitchen sink
Sink bowl - Rs. 3000 /-
Nahni / Floor Trap ( 1 nos )
Sink faucet ( 1 Nos )
Single bowl Stainless steel sink (1 Nos)

1 cold water connection for washing machine / sink connection


in the utility area to be provided along with Bib cock .
Bib Cock - Rs. 1000 /-
33 Additional points 1 cold water connection in Porch / Parking area to be provided
each
along with Bib cock. Any other additional point to be charged
extra

Electrical
Nos. As per the sheet attached.
Point wiring shall include all work necessary to complete wiring
from a switch to point outlet of any length, from the tapping
point on the distribution circuit to the switch. The following
Wires - Havells
shall be deemed to have been included in the point wiring: a.
Switches / Sockets -
Ceiling rose or connector as required. b. Any special or suitable
Anchor Roma Classic (
round block, of hylem sheet for neatly housing the connector
white color - Basic cost
and covering the fan hook in case of fan point. c. Conduit bushes
Rs.22/switch )
or sleeves where cable passes through walls etc. d. Earth wire
34 Electrical points MCB - Havells
from three pin socket outlet point / fan regulator to common
DB - Havells
earth. e. Bakelite/hylem/M.S. cover for all pull boxes/ junction
Electrical conduit -
boxes etc as approved by the Engineer in charge. f. All fixing
Anchor
accessories such as clips, rails screw, phil plugs, rawl plugs,
Modular metal boxes -
wooden plugs etc. as required. g. Connection to ceiling rose ,
Anchor
connector socket outlet , lamp holder switch and fan regulator
etc. h. Looping the live wire from switch board and inter
connections between points on the same circuit. i. Circuit wiring.
j. Requisite MCBs
As per electrical points
Anchor Roma classic or
Neutral conductor and earth continuity wire shall be brought to
equivalent
each switchboard
White color switches,
35 Switches & Sockets An earth wire shall be provided along with the circuit wires and
switch plates and sockets
shall be connected to earthing screws inside the box. The earth
are considered in this
terminal of the socket shall be connected to the earth terminal
package
provided inside the box.
All conduits to be concealed inside the wall by cutting chases.
• Minimum dia of electrical conduit should be 20mm
• Minimum thickness of the conduit to be 2mm on slabs/ 1.5mm
on walls.
36 Conduits Anchor
• Separate conduits shall be laid for the following systems: a)
Normal light, Fan and 6 A socket outlets. b) Power points. c) TV
outlets. d) Telephone points / data
- Flexible bends can be provided at additional cost.

16 G MS switch outlet boxes of min 50mm depth shall be used


37 Concealed metal boxes Anchor
as per the size requirement of the plate type switches

The smallest copper conductor to be used for lighting circuits


38 Wires & cables Havells
shall be of 1.5 sq.mm and for power circuit 4.0 sq.mm
39 Earthing Not included in scope. To be done at additional charges
40 MCB As required Havells
41 DB As per requirement Havells
42 Invertor / UPS wiring Not included in scope. To be done at additional charges
43 Solar power connection Not included in scope. To be done at additional charges

Doors & Windows

Window openings area considered for this scope is


1 Windows 10%(Excluding Toilet Ventillators) of the built up area. Additional
window area to be charged at the rate of basic rate of windows
Frame : - 5" x 3" 1st quality teak ( Ghana ) finished with
melamine clear polish.
Shutter : - 32 mm - 2nd quality teak Door ( BWR / IS 303 grade ).
Shutter Finish : - Melamine Polish
External / Main Door ( Typical
2 Hardware : - INR 50,000 /-
Opening size - 3'3" x 7' )
Outside : 1 nos SS handle , 1 nos SS aldrop , SS Hinges, Night
latch ( Godrej or equivalent ), 8-9 " SS handle ,
Inside : 1 no. SS aldrop , 1 nos 6" ss tower bolt, 1 nos 6" SS
handle. One Main Door is considered in scope
Frame : - 4" x 3" Sal/Mahagony finished with enamel paint.
Single jamb to be provided
Shutter : - 25 mm Flush Door ( BWR / IS 303 grade ).
Shutter Finish : - 2 coats of matt finish enamel paint
Internal Door (Typical opening
3 Hardware : - All hardware to be in SS finish aluminum. INR 12,000 /-
size 3' x 7' )
Outside : 1 nos aldrop , SS Hinges,
Inside : 1 no. aldrop , 1 nos 6" tower bolt, 1 nos cylindrical lock (
Godrej or equivalemt ), 1 nos door stopper. 1 door / bedroom, 1
utility door, 1 balcony door.
Toilet doors (Typical opening
4 FRP Doors and Frame INR 8,000 /-
size 2'6" x 7')
UPVC windows ; 2 track sliding windows with 2 nos glass
5 Windows shutters (No mosquito net shutter is considered in this scope. Rs.450/Sqft
Upgrade available at extra cost ). 4 mm clear glass

Painting
To be painted with 2 coats of water based interior emulsion .
1 Internal Walls JSW Pixa Elegant Interior
Base to be prepared with 2 coats of Putty & 1 coat of Primer

2 Exterior Walls To be painted with one coat of primer and 2 coats of Emulsion. JSW Pixa Elegant Exterior
Mild Steel surfaces ( grills , To be painted with 2 coats of water based satin finish enamel JSW Halo Acquglo
3
handrails, main gate etc ) paint. Majestic Satin
Wooden Door frames to be finished with clear enamel paint
4 Natural Wood
except main door.

Handrails & Grills

Window grills made with 12mm bars @ 4" center to center are
considered in this package ( please refer to the attached
1 Window grills standard schematic design for windows). The weight of grills
considered for this package is 1.25 kg per sft of the grill area.
Grill area is assumed to be equal to 10% of the built up area.
The balusters to be made in 1" x 1" SS square pipe @ 6" center
to center. Hand rail to be in 1 1/2" round SS Pipe. 20 Rft of
2 Staircase Handrails
railing per floor is assumed in the scope of work of this
package. SS 304 Grade
Basic SS Handrail (Basic cost Rs.700/RFT) Considered without
3 Balcony railing
Glass.
Cost of coumpound main gate is not considered in this scope
4 Main Gate and shall be quoted as an additional cost along with cost of
compound wall

External Works - Not considered in the scope.

1 Floor finish of setback areas


2 Compound wall
3 UG Sump
4 Septic tank
5 Ramp
6 Elevation Features
7 Rain water harvesting
Electrical connection from
8 Feeder pillar / main line to the
meter
9 Landscaping
Drain cover for storm water
10
drain adjacent to the plot
11 Kitchen Shelves
Standard Minimum Electrical Points Provision Table
Switch (6A) Switch (6A)
Socket Telephon Fan Switch (6A) Fan &
Location Switch (6A) Socket (5A) Switch (15A) Decorative/Spo Night/Foot
(15A) e/Data Regulator Wall Lights
t Lights Lamp
Hall/Living 6 6 1 2 5 3
TV/DTH/Charging/Modem/ Fan (2)/ Light (3) Light (3)
Bedroom 3 3 1 1 1 3 1 1
Lamp/Charging/Spare AC Fan (1)/ Light (2) Light (1) Light (1)
Kitchen 3 3 2 2 1 2
Fridge/Micro
Exhaust/Chimney(1)/Water
wave/Mixer Fan(1)/Light(1)
Purifier/RO/Spare
Grinder
Dining 3 3 1 3
Charging/Spare Fan (1)/ Light (2)
Drawing/Study Room 3 3 1 3
Charging/Spare Fan (1)/ Light (2)
Car Parking 1 1 2
Spare Light (2)
Sit Out/Foyer/Balcony 2 2 1 4
Fan (1)/ Light (2)/
Charging/Spare
Calling Bell(1)
External Development 4
Light (4)
Toilets 2 2 1 1 1
Charging/Exhaust Geyser Light (1)
Terrace 1 1 1 1 2
Charging/Spare Spare Light (1)
Total 24 24 5 5 1 7 29 4 1

You might also like