2318/2319 GENERAL GUIDE • Press B to change from mode to mode. Calendar Mode Timekeeping Mode Alarm Mode Dual Time Mode
Crown Crown
ABOUT THE BACKLIGHT (Module 2319 only) To set the hands
1. When the second hand is at 12 o'clock position, stop it by pulling the crown out. • Hold down L to illuminate the display for about 2 seconds. The backlight is dis- 2. Set the hands by turning the crown. abled while an input screen (with a flashing setting) is on the display. 3. Press the crown in on a time signal. • The backlight of this watch employs an electro-luminescent (EL) light, which loses its illuminating power after very long term use. • Frequent use of the backlight shortens the battery life. • The watch emits an audible sound whenever the display is illuminated. This does not indicate malfunction of the watch. ALARM MODE • The illumination provided by the backlight may be hard to see when viewed under direct sunlight. • The backlight automatically turns off whenever an alarm sounds.
A LN CALENDAR MODE Hour Minutes
• This is the normal mode for this watch.
To set the date Hour Minutes
Hour hand Minute hand When the Daily Alarm is turned on, an alarm sounds for 20 seconds at the preset time each day.
To set the Alarm Time
1. Hold down A until the ADJ indicator starts to flash, followed by flashing of the hour Crown digits of the alarm. Second hand • The alarm turns on at this time. 2. Press B to increase the hour digits. Holding down B changes the digits at high Year Month Day speed. 3. Press A to move the selection to the minutes digits. 4. Press B to increase the minutes digits. Holding down B changes the digits at high Day Day of week speed. 1. Hold down A until the ADJ indicator starts to flash, followed by flashing of the year 5. Press A to complete the procedure. digits. • If you do not operate any button for a few minutes while a selection is flashing, the 2. Press B to increase the year digits. Holding down B changes the digits at high flashing stops and the watch goes back to the Alarm Mode automatically. speed. 3. Press A to move the selection to month digits. To stop the alarm 4. Press B to increase the month digits. Holding down B changes the digits at high • Press any button to stop the alarm after it starts to sound. speed. 5. Press A to move the selection to the day digits. To turn the Daily Alarm on and off 6. Press B to increase the day digits. Holding down B changes the digits at high Press A while in the Alarm Mode to turn the Daily Alarm on and off. speed. 7. Press A to complete the procedure. Press A. • If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Calendar Mode automatically. • The date can be set with the range of January 1,1995 to December 31, 2039. • The day of the week changes automatically in accordance with the date. To test the alarm Hold down B to sound the alarm.
TIMEKEEPING MODE DUAL TIME MODE • Use this mode to set the current time. An incorrect time setting will result in incor- rect operation of the calendar.
Crown 0 Hour Minutes
Seconds Hour 12/24 Minutes Hour Minutes Hour Minutes Press A . To set the Dual Time 1. Hold down A until the ADJ indicator starts to flash, followed by flashing of the hour digits. 2. Press B to increase the hour digits. Holding down B changes the digits at high • Press A to switch the display between Hour/Minutes speed. Seconds and Seconds. 3. Press A to move the selection to the minutes digits. 4. Press B to increase the minutes digits. Holding down B changes the digits at high To set the time speed. 1. Hold down A until the ADJ indicator starts to flash, followed by flashing of the 5. Press A to complete the procedure. seconds digits. • In the Dual Time Mode, the seconds count is not displayed. But it is synchronized 2. Press B to reset the seconds to 00. If you press B while the seconds count is in with the seconds count of the Timekeeping Mode. the range of 30 to 59, the seconds are reset to 00 and 1 is added to the minutes. If • If you do not operate any button for a few minutes while a selection is flashing, the the seconds count is in the range of 00 to 29, the minutes count is unchanged. flashing stops and the watch goes back to the Dual Time Mode automatically. 3. Press A to move the selection to the hour digits. • The format(12-hour and 24-hour) of the Dual Time Mode matches the format you 4. Press B to increase the hour digits. Holding down B changes the hour digits at select for normal timekeeping. high speed. 5. Press A to move the selection to the minutes digits. 6. Press B to increase the minutes digits. Holding down B changes the minutes digits at high speed. 7. Press A to move the selection to 12/24. 8. Press B to toggle the timekeeping format between 12-hour and 24-hour. 9. Press A to complete the procedure. • If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Timekeeping Mode automatically.
