AC-350A-3M™AC-350ClassAAerospaceSealants

7/26/2022 | Page 1 of 6
Integral Products, Inc.

24045 Frampton Avenue
Harbor City, CA 90710
Ph: (310) 326-8889
Fax: (310) 326-7751
Email: info@integralproducts.com
Website: www.integralproducts.com
Authorized Distributor AC-350 A, 3M™ AC-350 Class A Aerospace

Sealants
3M™ Aerospace Sealant AC-350 Class A are fast-cure, intermediate density two-component,
manganese dioxide cure, brushable, polysulfide fuel tank and fuselage sealants. 3M™ AC-350 Class A
Sealants have outstanding resistance to aviation gasoline and jet fuel, as well as resistance to chemicals
and petroleum products common to the aircraft industry. 3M™ AC-350 Class A Sealants maintain
flexibility and bond strength on most metal substrates such as aluminum, titanium, steel, stainless
steel, and
more
Typical Physical and Application Properties | Application Life and Cure Time at 77 Degree Fahrenheit
(ºF) and 50 Percent (%) Relative Humidity | Typical Physical and Performance Properties of Cured
Compound after 14 Days at 77 Degree Fahrenheit (ºF)/50 Percent (%) Relative Humidity | Specifications
| Health and Safety Precaution | Storage | Technical Information | Product Use | Warranty, Limited
Remedy, and Disclaimer | Limitation of Liability | Note
Typical Physical and Application Properties
Base Color White
Accelerator Color Dark Brown

7/26/2022 | Page 2 of 6
Non-Volatile Content 88 %
Base Viscosity1 250 to 500 Poise
The technical information and data should be

Note for Typical Physical
considered representative or typical only and should not
and Application Properties
be used for specification purposes.
Mix Ratio (By Weight) 100 Base/10 Accelerator
Application Life and Cure Time at 77 Degree Fahrenheit (ºF) and 50 Percent (%) Relative Humidity
A-1
Class A-1/2
A-2
Minimum Application Life

1/2 hour
for Class A-1/2

1 hour
for Class A-1

2 hour
for Class A-2
Application life refers to the length of time that mixed

compound remains at a consistency suitable for
application with brush or roller. Application life is always
Note for Minimum measured at a standard temperature of 77 ºF with a
Application Life relative humidity level of 50 %. In general, for every 20
ºF rise in temperature, the application life is halved; for
every 20ºF drop, it is doubled. High humidity levels
during the mixing process will shorten application life.
Typical Tack-Free Time for

3 hour
Class A-1/2

5 hour
Class A-1
7/26/2022 | Page 3 of 6

8 hour
Class A-2
Tack-free time is the length of time after which a mixed

Note for Typical Tack-Free
sealant will no longer tightly adhere to LP-P-690 low
Time
density polyethylene film.
Typical Cure Time for Class

4 hour
A-1/2

8 hour
A-1

12 hour
A-2
Cure time is defined as the length of time it takes 3M™

Aerospace Sealant AC-350 Class A to reach 30A
hardness. It depends on three factors: remaining
Note for Typical Cure Time application life, temperature, and relative humidity. The
temperature/humidity factors for application life also
apply to curing. To accelerate the curing process, apply
heat up to (but not more than) 140 ºF.
Typical Physical and Performance Properties of Cured Compound after 14 Days at 77 Degree
Fahrenheit (ºF)/50 Percent (%) Relative Humidity
Mixed Color Light Gray
Specific Gravity 1.4
Hardness 48 to 53 Durometer "A"
Low Temperature No cracking, checking or adhesion loss when tested at

Flexibility -65 ºF (-54 ºC)
Weight Loss in Josef Rakich

3 to 4 %
Fitness (JRF)
-65 to +250 ºF
Service Temperature
-54 to +121 ºC
7/26/2022 | Page 4 of 6
Short Term Service -65 to +360 ºF

Temperature -54 to +182 ºC
Corrosion None
Thermal Rupture
Resistance at 300 Degree
Fahrenheit (ºF) Conforms
Temperature and 30
Minutes (min) Time
Repairability2 50 piw/100% Cohesive Failure
Repairability to Aerospace
Material Specification 67 piw/100% Cohesive Failure
(AMS-S-8802) Sealants
Repairability to Aerospace
Material Specification 54 piw/100% Cohesive Failure
(AMS3276) Sealants
Specifications
Industry Focus Aerospace
Relative Humidity 50 %
Aluminum
Stainless Steel
Substrate Material
Steel
Titanium
Repairing Integral Fuel Tanks

Applications Sealing Fuselages
Sealing Integral Fuel Tanks
Health and Safety Precaution
3M™ Aerospace Sealant AC-350 Class A are safe to use

and apply when recommended precautions are
7/26/2022 | Page 5 of 6
followed. Before using this product, read and

Health and Safety
understand the Material Safety Data Sheet (MSDS),
Precaution
which provides information on health, physical and
environmental hazards, handling precautions and first
aid recommendations. An MSDS is available on request.
Storage
The shelf life of 3M™ Aerospace Sealant AC-350 Class A

is 9 months from date of packaging, when stored at
Storage
temperatures below 80 ºF in its original unopened
container.
Technical Information
The technical information, recommendations and other

statements contained in this document are based upon
Technical Information tests or experience that 3M™ believes are reliable, but
the accuracy or completeness of such information is not
guaranteed.
Product Use
Many factors beyond 3M™'s control and uniquely within

user's knowledge and control can affect the use and
performance of a 3M™ product in a particular
application. Given the variety of factors that can affect
Product Use
the use and performance of a 3M™ product, user is
solely responsible for evaluating the 3M™ product and
determining whether it is fit for a particular purpose and
suitable for user's method of application.
Warranty, Limited Remedy, and Disclaimer
Many factors beyond 3M™'s control and uniquely within

user's knowledge and control can affect the use and
7/26/2022 | Page 6 of 6
performance of a 3M™ product in a particular

Warranty, Limited Remedy, application. Given the variety of factors that can affect
and Disclaimer the use and performance of a 3M™ product, user is
solely responsible for evaluating the 3M™ product and
determining whether it is fit for a particular purpose and
suitable for user's method of application.
Limitation of Liability
Except where prohibited by law, 3M™ will not be liable

for any loss or damage arising from the 3M™ product,
Limitation of Liability whether direct, indirect, special, incidental or
consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.
Note
These products were manufactured under a 3M™

Note Quality Management System registered to the AS9100
standard.
1 RVF Brookfield #6 spindle at 10 rpm, 77 ºF

2 To Itself

AC-350A-3M™AC-350ClassAAerospaceSealants

Uploaded by

Copyright:

Available Formats

AC-350A-3M™AC-350ClassAAerospaceSealants

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

AC-350A-3M™AC-350ClassAAerospaceSealants

Uploaded by

Copyright:

Available Formats

7/26/2022 | Page 1 of 6

Integral Products, Inc.

Authorized Distributor AC-350 A, 3M™ AC-350 Class A Aerospace

Base Color White

Accelerator Color Dark Brown

Base Viscosity1 250 to 500 Poise

The technical information and data should be

Mix Ratio (By Weight) 100 Base/10 Accelerator

Minimum Application Life

Minimum Application Life

Minimum Application Life

Application life refers to the length of time that mixed

Typical Tack-Free Time for

Typical Tack-Free Time for

Typical Tack-Free Time for

Tack-free time is the length of time after which a mixed

Typical Cure Time for Class

Typical Cure Time for Class

Typical Cure Time for Class

Cure time is defined as the length of time it takes 3M™

Mixed Color Light Gray

Specific Gravity 1.4

Hardness 48 to 53 Durometer "A"

Low Temperature No cracking, checking or adhesion loss when tested at

Weight Loss in Josef Rakich

Short Term Service -65 to +360 ºF

Repairability2 50 piw/100% Cohesive Failure

Industry Focus Aerospace

Repairing Integral Fuel Tanks

Health and Safety Precaution

3M™ Aerospace Sealant AC-350 Class A are safe to use

followed. Before using this product, read and

The shelf life of 3M™ Aerospace Sealant AC-350 Class A

The technical information, recommendations and other

Many factors beyond 3M™'s control and uniquely within

Warranty, Limited Remedy, and Disclaimer

Many factors beyond 3M™'s control and uniquely within

performance of a 3M™ product in a particular

Except where prohibited by law, 3M™ will not be liable

These products were manufactured under a 3M™

1 RVF Brookfield #6 spindle at 10 rpm, 77 ºF

You might also like